Search Results

Search found 9014 results on 361 pages for 'space scenery'.

Page 197/361 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Add SATA Port to Motherboard?

  - by YAS

  I recently took off the bottom covers to my laptop, an Aspire 6930, and one of the covers was hiding an empty space large enough for a second hard drive. The bit of motherboard that was showing had the solder joints for a SATA port, but no port. What I'm wondering is; If I get a spare SATA port and solder it in would it mess up my motherboard and kill my laptop? I'm not concerned about a clean solder job, I can do that. But if the port is soldered in cleanly if there would be any danger to doing it. It'd be pretty darn awesome to get a second hard drive in my laptop.

  Read the article

• Reverse lookup of inode/file from offset in raw device on linux and ext3/4?

  - by lilinjn

  In linux, given an offset into a raw disk device, is it possible to map back to an partition + inode? For example, suppose I know that string "xyz" is contained at byte offset 1000000 on /dev/sda: (e.g. xxd -l 100 -s 1000000 /dev/sda shows a dump that begins with "xyz") 1) How do I figure out which partition (if any) offset 1000000 is located in?(I imagine this is easy, but am including it for completeness) 2) Assuming the offset is located in a partition, how do I go about finding which inode it belongs to (or determine that it is part of free space) ? Presumably this is filesystem specific, in which case does any one know how to do this for ext4 and ext3?

  Read the article

• Server OS: put it on a separate drive? Yes, no, or depends on the situation?

  - by captainentropy

  Hi, I would like opinions, or facts, both preferably, on whether it's ok to install a server's OS on the RAID array or not. I would predict installation on separate drives is the best but I'm interested in the performance. The server in question will have 8 cores (2.4GHz ea.), 24GB RAM, and ~16TB of usable space of server-class drives in RAID10. There is also a subsytem of an ~equivalent size for backup. I will be running CPU/memory intesive applications on this server in addition to it being file storage for my work (research lab). IF I install the OS (haven't decided which one, probably Ubuntu or Fedora or some other good linux distro) on separate drives will there be any performance problems if they aren't configured in RAID10? IF it is better to have the OS on separate drives should I go for 150GB velociraptors in RAID1 or smallish SSD drives in RAID1? Money is unfortunately a factor as I think I'm close to maxing my budget as it is. Thanks!

  Read the article

• How do you expand a raid disk array in a dell 2850?

  - by johnny

  Hi, I have a Dell 2850 and I want to install Windows 2008 Server. Problem is that my C drive only has 16GB of space. The requirements say I need at least 20. I have an open bay for a drive. If I put in another drive, how can I add that to the array and them make it only for the C drive? what do I do? Thank you. edit: I don't want to remove any drives. I just want to add a new one to the existing array. Can I do that and make sure that new drive is for the logical C drive?

  Read the article

• How to configure Time Machine to also backup an connected external hard drive?

  - by Another Registered User

  I've inserted a sweet SSD into my MacBook Pro, but it had limited space. So I had to export 60 GB of Data to an external hard drive. But now, when I run TimeMachine to backup my stuff, of course it only backups what's on the system disk. Is there a way how to also backup the connected external hard drive together with TimeMachine? Maybe there's a trick to get this work, with a fake folder that's actually the mounted drive? What could I do?

  Read the article

• Access requires a username and password

  - by articles

  Access requires a username and password Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection) I am getting this above message. I have hosted a website in godaddy hosting space. But when i run it.. it is prompt for User name and Password (above message). I am not using windows authentications in my website.... Moreover, i have test my website code on testing server....it never prompts for this message unless Integrated Windows Authentication is checked. Any help is appreciated.. Thanks

  Read the article

• how can I get back /usr/local/bin/mysql on Snow Leopard?

  - by Ole Media

  From terminal and trying to uninstall macports, I ran a command, rm -rf / macports...., that erased bunch of stuff. I feel ashamed about this, not realizing the space after /. Since then, mysql is running but I cannot execute any of the mysql commands because it is not under /usr/local/bin/ I went ahead an reinstall mysql but without luck. What steps do you recommend on doing in order to be able to run mysql, mysqlduml, mysqladmin, from terminal? I can access databases from phpmyadmin, so mysql is running, don't ask me how.

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• Image archiving on network folders.

  - by Steve

  Our company uses Symantec Enterprise Vault to archive network folders and files, presumably to save on disk space. I can't see any other benefits. Our company is an architectural firm, and the problem our users face is locating particular images in network folders. Because all the files are archived, Windows Explorer is unable to generate image thumbnails. Each image needs to be individually restored from archive by double-click before it can be viewed. This is a big time-waster for our architects. Symantec say there is no workaround for this. Does anyone know of an alternative we could use for archiving images? Alternatively, some batch utility to create and maintain a thumbs.db file in each folder? Thanks.

  Read the article

• Openvz: What exactly does it mean when tcpsndbuf failcnt increases? Why must there be a minimum difference between limit and barrier?

  - by Antonis Christofides

  When the failcnt of tcpsndbuf increases, what does this mean? Does it mean the system had to go past the barrier, or past the limit? Or, maybe, that the system failed to provide enough buffers, either because it needed to go past the limit, or because it needed to go past the barrier but couldn't because other VMs were using too many resources? I understand the difference between barrier and limit only for disk space, where you can specify a grace period for which the system can exceed the barrier but not the limit. But in resources like tcpsndbuf, which have no such thing as a grace period, what is the meaning of barrier vs. limit? Why does the difference between barrier and limit in tcpsndbuf be at least 2.5KB times tcpnumsock? I could understand it if, e.g., tcpsndbuf should be at least 2.5KB times tcpnumsock (either the barrier or the limit), but why should I care about the difference between the barrier and the limit?

  Read the article

• Virtual Box - not filling entire screen

  - by jdavis

  I am new to VirtualBox and am trying to set up an instance of Windows 7 64. I have the virtual machine instance running with Windows 7 now installed, but it only fills up a small portion of my screen. Even when I go full screen, the window stays the same size and the rest of the screen is filled with gray space. I have installed VirtualBox Guest Additions, which allowed me to go from a resolution of 800x600 to 1024x768, but this still isn't satisfactory as my laptop display is 1600x900. Any help on this would be most appreciated. Thanks.

  Read the article

• How to delete "System Volume Information" folder from external drives?

  - by Nadude

  I'm running Vista Prof 32bit on a lenovo w500 thinkpad. I have four external drives and use 4 different PCs, that all have system volume information folders, taking up lots of space, and I can't delete them. I don't even know which computer's files are backed up on which external. I've used Thinkvantage rescue and recovery to delete all backups, as well as checked system restore settings to only use my main C drive. I checked all the PC's to ensure only the Main drive keeps system restore points and deleted previous versions. I ran Disc Clean up too. But I can't figure out how to get rid of these large folders from my external drives.

  Read the article

• Crap, hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• What is the right iptables rule to allow apt-get to download programs?

  - by anthony01

  When I type something like sudo apt-get install firefox, everything work until it asks me: After this operation, 77 MB of additional disk space will be used. Do you want to continue [Y/n]? Y Then error messages are displayed: Failed to fetch: <URL> My iptables rules are as follows: -P INPUT DROP -P OUTPUT DROP -P FORWARD DROP -A INPUT -i lo -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A INPUT -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT What should I add to allow apt-get to download updates? Thanks

  Read the article

• Crossplatform "jail" for an application

  - by Alexander

  We currently have a variety of systems (Linux, Solarix, *BSD, HP-UX ...) on which we are not allowed to install anything into / (but I have root access. That's strange, I know). But we'd like to run Puppet on all of them. So, the obvious idea is to install Puppet with all prebuilt dependencies into some isolated tree, something like "jail", which will allow to use dependences from some prefix and to access the host system. The big advatanges would be uniform deployment and updates. One solution that came to my mind is to deploy Gentoo Prefix, and install Puppet there with package manager. However, this requires a lot of extra space and some manual patching for each system. Maybe there are some more elegant and simple solutions?

  Read the article

• Can expire_logs_days be less than 1 day in MySQL?

  - by Scott

  So... yesterday I received an "after the fact email" about a campaign that has started for one of the services that I run. Now the DB server is getting hammered, hard, to the tune of about 300mb/min in binary logging for the replicate. As you could imagine, this is chewing up space at a fairly tremendous rate. My normal 7 day expiry of binary logs just isn't cutting it. I've resorted to truncating logs to just the last for 4 hours with(I'm verifying that replication is up to date with mk-heartbeat): PURGE MASTER LOGS BEFORE DATE_SUB( NOW(), INTERVAL 4 HOUR); I'm just running that from cron every few hours to weather the storm, but it made me question the minimum value for expire_logs_days. I haven't come across a value that is less than 1, but that doesn't mean that it isn't possible. http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html#sysvar_expire_logs_days gives the type as being numeric, but doesn't indicate if it's expecting integers.

  Read the article

• MacBook Air with Bootcamp - How to partition?

  - by Andrew

  I want to buy a MacBook Air for my wife with a 128GB SSD. She has to use Windows 7 but I would like to keep OS X for myself to use somtimes. Using Bootcamp, is it feasible to install the following? Mac partition: 36GB with Mac OS X and Microsoft Office 2011 Word, Excel & Powerpoint and Skype. (minimal use) Windows partition: 92GB with Windows 7 professional and Microsoft Office 2010 Word, Excel & Powerpoint, and Skype (daily use) Media to be kept on SD card or external USB3 drive. (Note: Using Parrallels may save space, but my wife won't go for the user experience)

  Read the article

• Use Windows 7 offline sync with external usb hd

  - by René

  Yeah, truly the whole question in the header. Is there a way to use Windows 7 offline sync (which we know from network mapped drives) with a external usb hd? When not, are there similar built in tools or good third party tools? My scenario: I want to buy a ultrabook with SSD which is mostly limited in space. So I'm going to put all files to a external HD and only store current projects on the local SSD. Let's say I have to change project. It would be easy just change sync folders and have the second project synced to my hd too. With network mapped drives it's such easy. Paths do not differ if the drive is offline so in most situations you don't take notice if the folder is offline. And you only have to activate offline file for the folders you courrently need for work. So is there a similar solution for usb hard drives?

  Read the article

• How to setup wireless radio to network using 2 nics?

  - by CptanPanic

  I am having problems setting up this network, hopefully someone can help me. Laptop <- Wireless Radio <- ... - Wireless Radio <- CPU1( NIC1,NIC2) <- SWITCH <- CPU2 I have a computer with 2 NICs (CPU1). One goes to a wireless radio that connects to a wireless laptop, the other NIC goes to network switch. I can't connect Wireless Radio to switch due to space constraints. All the machines and radios are on same network addresses. I tried using Window's Bridge network which did allow Laptop to reach CPU2, but not CPU1. What is the way to get this to work so all the computers can talk to each other?

  Read the article

• Formatting a 5.25" floppy disk

  - by Spütnik

  So after the massive trouble of finding a 5.25" floppy drive and a connecting it up, then changing the BIOS so it's set as my A: drive, I tried to format a couple of high-density 1.2MB floppy disks using the "format A:" command in Command Prompt. Both times it formatted only 160KB and left it at that. If I then check the amount of space on those disks, it then comes up as 160KB. Why is this the case? How can I get my the full value out of my 1.2MB? For reference, I have a Mitsubishi MF504C-318UG, which should support 1.2MB disks.

  Read the article

• How do I make an encrypted disk image on Debian?

  - by Blacklight Shining

  I'm basically looking for an equivalent to OS X's encrypted sparsebundles. The solution should have support for file ACLs and should not force me to specify a size in the beginning (the image should only take up as much space as it needs) or require root access to mount and unmount. Ideally, I should be able to set two different passwords (both for the same data), but that's not too important. (I do have root access to the machine and so can install packages and such, but I would rather not have to sudo just to mount an image.)

  Read the article

• How do I transfer videos from DV camera to divx?

  - by Ward

  I have a videocamera that uses mini-dv tapes. In the past, I've transferred the files and made DVDs, but that was time- and disk-space- consuming. I wanted to find new tools and to figure out how to convert the videos to something smaller like divx but I didn't know enough about all the different formats to answer a previous question. Well, now I've done a bunch of research and I understand some of the details of video encoding, and in the process I wrote up some notes on the different formats involved in going from a DV videocam to divx or H.264 They're a bit rambling, but in case it's of any use, I'm going to post them as an answer. I'd be very interested in anyone else's answer as well.

  Read the article

• Partition table damaged

  - by emaster70

  Hello, I'm currently in a terrible situation with my hdd: I was trying to install an OS side by side with my windows 7 x64 and I used the Paragon Partition Manager feature made for that. It disabled/hid/(damaged?) one of my partitions and now I can no longer access it. The partition, unfortunately, contains data I need to access urgently and I've got no backup. To complicate things even further I don't have another PC (I'm writing this msg from my iphone) and all I can rely on is a backtrac 4 disk (wkn't connect to my wifi, gets stuck obtaining IP address) and. Windows 7 x64 disk. Booting into windows fails with the pc hanging on the starting windows screen. Safe mode won't work either. Is there anything I can do? Here's the layout of the disk: Recovery partition Win partition Unallocated space (it's supposed to be my data partition) Other os partition (don't care about that, the installation of the other OS failed) Please help me, I'm desperate.

  Read the article

• Problem with Windows Boot Manager after using GParted

  - by Cenoc

  I Get the follow: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "Repair your computer." If you do not have this disc, Contact your system administrator or computer manufacturer for assistance. Status: 0XC0000225 Info: The boot selection failed because a required device is inaccessible. After I tried to expand the Windows partition. I dont know where I put the Windows 7 CD and I was wondering if anyone knew of any way of fixing this problem? I'm guessing I deleted something I shouldnt have deleted....... I actually wanted to get some more space at the expense of the recovery drive. Thanks in advance!

  Read the article

• Linux : How to convert media files to DVD format and burn?

  - by James.Elsey

  I have a load of media files on my PC, mostly AVI/MKV and some mpegs. On windows, I would use ConvertXToDVD to convert these to DVD format, and to burn to disc. That application also lets you save a bit of space on the DVD to put the original file in its AVI format on as well. How can I do this on linux? What are the alternatives to this Windows application? I could try to run ConvertXtoDVD under wine but I would prefer to find a native linux solution Thanks in advance!

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >