Search Results

Search found 5619 results on 225 pages for 'starts'.

Page 197/225 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• ISO Files to USB &ndash; The Cheap and Easy Way

  - by RonGarlit

  (DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

  Read the article

• Initial Review - Mastering Unreal Technology I: Introduction to Level Design with Unreal Engine 3

  - by Matt Christian

  Recently I purchased 3 large volumes on using the Unreal 3 Engine to create levels and custom games.  This past weekend I cracked the spine of the first and started reading.  Here are my early impressions (I'm ~250 pages into it, with appendices it's about 900). Pros Interestingly, the book starts with an overview of the Unreal engines leading up to Unreal 3 (including Gears of War) and follows with some discussion on planning a mod and what goes into the game development process.  This is nice for an intro to the book and is much preferred rather than a simple chapter detailing what is on the included CD, how to install and setup UnrealEd, etc...  While the chapter on Unreal history and planning can be considered 'fluff', it's much less 'fluffy' than most books provide. I need to mention one thing here that is pretty crucial in the way I'm going to continue reviewing this book.  Most technical books like this are used as a shelf reference; as a thick volume you use for looking up techniques every now and again.  Even so, I prefer reading from cover to cover, including chapters I may already be knowledgable on (I'm sure this is typical for most people).  If there was a chapter on installing UnrealEd (the previously mentioned 'fluff'), I would probably force myself to read it, even though I've installed the game and engine multiple times on different systems. Chapter 3 is where we really get to the introduction piece of UnrealEd, creating your first basic level.  This large chapter details creating two small rooms, adding static meshes, adding lighting, creating and adding particle emitters, creating a door that animates with Unreal Matinee and Kismet, static meshes with physics, and other little additions to make your level look less beginner.  This really is a chapter that overviews the entire rest of the book, as each chapter following details the creation and intermediate usages of Static Meshes, Materials, Lighting, etc... One other very nice part to this book is the way the tutorials are setup.  Each tutorial builds off the previous and all are step-by-step.  If you haven't completed one yet, you can find all the starting files on the CD that comes with the book. Cons While the description of the overview chapter (Chapter 3) is fresh in your mind, let me start the cons by saying this chapter is setup extremely confusing for the noob.  At one point, you end up creating a door mesh and setting it up as a InteropMesh so that it is ready to be animated, only to switch to particles and spend a good portion of time working on a different piece of the level.  Yes, this is actually how I develop my levels (jumping back and forth), though it's very odd for a book to jump out of sequence. The next item might be a positive or a negative depending on your skill level with UnrealEd.  Most of the introduction to the editor layout is found in one of the Appendices instead of before Chapter 3.  For new readers, this might lead to confusion as Appendix A would typically be read between Chapter 2 and 3.  However, this is a positive for those with some experience in UnrealEd as they don't have to force themselves through a 'learn every editor button' chapter.  I'm listing this in the Cons section as the book is 'Introduction to...' and is probably going to be directed toward a lot of very beginner developers. Finally, there's a lack of general description to a lot of the underlying engine and what each piece in UnrealEd is or does.  Sometimes you'll be performing Tutorial after Tutorial with barely a paragraph in between describing ANY of what you've just done.  Tutorial 1.1 Step 6 says to press Button X, so you do.  But why?  This is in part a problem with the structure of the tutorials rather than the content of the book.  Since the tutorials are so focused on a step-by-step (or procedural) description of a process, you learn the process and not why you're doing that.  For example, you might learn how to size a material to a surface, but will only learn what buttons to press and not what each one does. This becomes extremely apparent in the chapter on Static Meshes as most of the chapter is spent in 3D Studio Max.  Since there are books on 3DSM and modelling, the book really only tells you the steps and says to go grab a book on modelling if you're really interested in 3DSM.  Again, I've learned the process to develop my own meshes in 3DSM, but I don't know the why behind the steps. Conclusion So far the book is very good though I would have a hard time recommending it to a complete beginner.  I would suggest anyone looking at this book (obviously including the other 2, more advanced volumes) to pick up a copy of UDK or Unreal 3 (available online or via download services such as Steam) and watch some online tutorials and play with it first.  You'll find plenty of online videos available that were created by the authors and may suit as a better introduction to the editor.

  Read the article

• The Top Ten Security Top Ten Lists

  - by Troy Kitch

  As a marketer, we're always putting together the top 3, or 5 best, or an assortment of top ten lists. So instead of going that route, I've put together my top ten security top ten lists. These are not only for security practitioners, but also for the average Joe/Jane; because who isn't concerned about security these days? Now, there might not be ten for each one of these lists, but the title works best that way. Starting with my number ten (in no particular order): 10. Top 10 Most Influential Security-Related Movies Amrit Williams pulls together a great collection of security-related movies. He asks for comments on which one made you want to get into the business. I would have to say that my most influential movie(s), that made me want to get into the business of "stopping the bad guys" would have to be the James Bond series. I grew up on James Bond movies: thwarting the bad guy and saving the world. I recall being both ecstatic and worried when Silicon Valley-themed "A View to A Kill" hit theaters: "An investigation of a horse-racing scam leads 007 to a mad industrialist who plans to create a worldwide microchip monopoly by destroying California's Silicon Valley." Yikes! 9. Top Ten Security Careers From movies that got you into the career, here’s a top 10 list of security-related careers. It starts with number then, Information Security Analyst and ends with number one, Malware Analyst. They point out the significant growth in security careers and indicate that "according to the Bureau of Labor Statistics, the field is expected to experience growth rates of 22% between 2010-2020. If you are interested in getting into the field, Oracle has many great opportunities all around the world.  8. Top 125 Network Security Tools A bit outside of the range of 10, the top 125 Network Security Tools is an important list because it includes a prioritized list of key security tools practitioners are using in the hacking community, regardless of whether they are vendor supplied or open source. The exhaustive list provides ratings, reviews, searching, and sorting. 7. Top 10 Security Practices I have to give a shout out to my alma mater, Cal Poly, SLO: Go Mustangs! They have compiled their list of top 10 practices for students and faculty to follow. Educational institutions are a common target of web based attacks and miscellaneous errors according to the 2014 Verizon Data Breach Investigations Report.    6. (ISC)2 Top 10 Safe and Secure Online Tips for Parents This list is arguably the most important list on my list. The tips were "gathered from (ISC)2 member volunteers who participate in the organization’s Safe and Secure Online program, a worldwide initiative that brings top cyber security experts into schools to teach children ages 11-14 how to protect themselves in a cyber-connected world…If you are a parent, educator or organization that would like the Safe and Secure Online presentation delivered at your local school, or would like more information about the program, please visit here.” 5. Top Ten Data Breaches of the Past 12 Months This type of list is always changing, so it's nice to have a current one here from Techrader.com. They've compiled and commented on the top breaches. It is likely that most readers here were effected in some way or another. 4. Top Ten Security Comic Books Although mostly physical security controls, I threw this one in for fun. My vote for #1 (not on the list) would be Professor X. The guy can breach confidentiality, integrity, and availability just by messing with your thoughts. 3. The IOUG Data Security Survey's Top 10+ Threats to Organizations The Independent Oracle Users Group annual survey on enterprise data security, Leaders Vs. Laggards, highlights what Oracle Database users deem as the top 12 threats to their organization. You can find a nice graph on page 9; Figure 7: Greatest Threats to Data Security. 2. The Ten Most Common Database Security Vulnerabilities Though I don't necessarily agree with all of the vulnerabilities in this order...I like a list that focuses on where two-thirds of your sensitive and regulated data resides (Source: IDC).  1. OWASP Top Ten Project The Online Web Application Security Project puts together their annual list of the 10 most critical web application security risks that organizations should be including in their overall security, business risk and compliance plans. In particular, SQL injection risks continues to rear its ugly head each year. Oracle Audit Vault and Database Firewall can help prevent SQL injection attacks and monitor database and system activity as a detective security control. Did I miss any?

  Read the article

• ASP.NET Web API - Screencast series Part 3: Delete and Update

  - by Jon Galloway

  We're continuing a six part series on ASP.NET Web API that accompanies the getting started screencast series. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. In Part 1 we looked at what ASP.NET Web API is, why you'd care, did the File / New Project thing, and did some basic HTTP testing using browser F12 developer tools. In Part 2 we started to build up a sample that returns data from a repository in JSON format via GET methods. In Part 3, we'll start to modify data on the server using DELETE and POST methods. So far we've been looking at GET requests, and the difference between standard browsing in a web browser and navigating an HTTP API isn't quite as clear. Delete is where the difference becomes more obvious. With a "traditional" web page, to delete something'd probably have a form that POSTs a request back to a controller that needs to know that it's really supposed to be deleting something even though POST was really designed to create things, so it does the work and then returns some HTML back to the client that says whether or not the delete succeeded. There's a good amount of plumbing involved in communicating between client and server. That gets a lot easier when we just work with the standard HTTP DELETE verb. Here's how the server side code works: public Comment DeleteComment(int id) { Comment comment; if (!repository.TryGet(id, out comment)) throw new HttpResponseException(HttpStatusCode.NotFound); repository.Delete(id); return comment; } If you look back at the GET /api/comments code in Part 2, you'll see that they start the exact same because the use cases are kind of similar - we're looking up an item by id and either displaying it or deleting it. So the only difference is that this method deletes the comment once it finds it. We don't need to do anything special to handle cases where the id isn't found, as the same HTTP 404 handling works fine here, too. Pretty much all "traditional" browsing uses just two HTTP verbs: GET and POST, so you might not be all that used to DELETE requests and think they're hard. Not so! Here's the jQuery method that calls the /api/comments with the DELETE verb: $(function() { $("a.delete").live('click', function () { var id = $(this).data('comment-id'); $.ajax({ url: "/api/comments/" + id, type: 'DELETE', cache: false, statusCode: { 200: function(data) { viewModel.comments.remove( function(comment) { return comment.ID == data.ID; } ); } } }); return false; }); }); So in order to use the DELETE verb instead of GET, we're just using $.ajax() and setting the type to DELETE. Not hard. But what's that statusCode business? Well, an HTTP status code of 200 is an OK response. Unless our Web API method sets another status (such as by throwing the Not Found exception we saw earlier), the default response status code is HTTP 200 - OK. That makes the jQuery code pretty simple - it calls the Delete action, and if it gets back an HTTP 200, the server-side delete was successful so the comment can be deleted. Adding a new comment uses the POST verb. It starts out looking like an MVC controller action, using model binding to get the new comment from JSON data into a c# model object to add to repository, but there are some interesting differences. public HttpResponseMessage<Comment> PostComment(Comment comment) { comment = repository.Add(comment); var response = new HttpResponseMessage<Comment>(comment, HttpStatusCode.Created); response.Headers.Location = new Uri(Request.RequestUri, "/api/comments/" + comment.ID.ToString()); return response; } First off, the POST method is returning an HttpResponseMessage<Comment>. In the GET methods earlier, we were just returning a JSON payload with an HTTP 200 OK, so we could just return the  model object and Web API would wrap it up in an HttpResponseMessage with that HTTP 200 for us (much as ASP.NET MVC controller actions can return strings, and they'll be automatically wrapped in a ContentResult). When we're creating a new comment, though, we want to follow standard REST practices and return the URL that points to the newly created comment in the Location header, and we can do that by explicitly creating that HttpResposeMessage and then setting the header information. And here's a key point - by using HTTP standard status codes and headers, our response payload doesn't need to explain any context - the client can see from the status code that the POST succeeded, the location header tells it where to get it, and all it needs in the JSON payload is the actual content. Note: This is a simplified sample. Among other things, you'll need to consider security and authorization in your Web API's, and especially in methods that allow creating or deleting data. We'll look at authorization in Part 6. As for security, you'll want to consider things like mass assignment if binding directly to model objects, etc. In Part 4, we'll extend on our simple querying methods form Part 2, adding in support for paging and querying.

  Read the article

• Running Jetty under Windows Azure Using RoleEntryPoint in a Worker Role

  - by Shawn Cicoria

  This post is built upon the work of Mario Kosmiskas and David C. Chou’s prior postings – from here: http://blogs.msdn.com/b/mariok/archive/2011/01/05/deploying-java-applications-in-azure.aspx  http://blogs.msdn.com/b/dachou/archive/2010/03/21/run-java-with-jetty-in-windows-azure.aspx As Mario points out in his post, when you need to have more control over the process that starts, it generally is better left to a RoleEntryPoint capability that as of now, requires the use of a CLR based assembly that is deployed as part of the package to Azure. There were things I liked especially about Mario’s post – specifically, the ability to pull down the JRE and Jetty runtimes at role startup and instantiate the process using the extracted bits.  The way Mario initialized the java process (and Jetty) was to take advantage of a role startup task configured as part of the service definition.  This is a great quick way to kick off processes or tasks prior to your role entry point.  However, if you need access to service configuration values or role events, that’s where RoleEntryPoint comes in.  For this PoC sample I moved the logic for retrieving the bits for the jre and jetty to the worker roles OnStart – in addition to moving the process kickoff to the OnStart method.  The Run method at this point is there to loop and just report the status of the java process. Beyond just making things more parameterized, both Mario’s and David’s articles still form the essence of the approach. The solution that accompanies this post provides all the necessary .NET based Visual Studio project.  In addition, you’ll need: 1. Jetty 7 runtime http://www.eclipse.org/jetty/downloads.php 2. JRE http://www.oracle.com/technetwork/java/javase/downloads/index.html Once you have these the first step is to create archives (zips) of the distributions.  For this PoC, the structure of the archive requires that the root of the archive looks as follows: JRE6.zip jetty---.zip Upload the contents to a storage container (block blob), and for this example I used /archives as the location.  The service configuration has several settings that allow, which is the advantage of using RoleEntryPoint, the ability to provide these things via native configuration support from Azure in a worker role. Storage Explorer You can use development storage for testing this out – the zipped version of the solution is configured for development storage.  When you’re ready to deploy, you update the two settings – 1 for diagnostics and the other for the storage container where the /archives are going to be stored. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="HostedJetty" osFamily="2" osVersion="*"> <Role name="JettyWorker"> <Instances count="1" /> <ConfigurationSettings> <!--<Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="DefaultEndpointsProtocol=https;AccountName=<accountName>;AccountKey=<accountKey>" />--> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="JettyArchive" value="jetty-distribution-7.3.0.v20110203b.zip" /> <Setting name="StartRole" value="true" /> <Setting name="BlobContainer" value="archives" /> <Setting name="JreArchive" value="jre6.zip" /> <!--<Setting name="StorageCredentials" value="DefaultEndpointsProtocol=https;AccountName=<accountName>;AccountKey=<accountKey>"/>--> <Setting name="StorageCredentials" value="UseDevelopmentStorage=true" />   For interacting with Storage you can use several tools – one tool that I like is from the Windows Azure CAT team located here: http://appfabriccat.com/2011/02/exploring-windows-azure-storage-apis-by-building-a-storage-explorer-application/  and shown in the prior picture At runtime, during role initialization and startup, Azure will call into your RoleEntryPoint.  At that time the code will do a dynamic pull of the 2 archives and extract – using the Sharp Zip Lib <link> as Mario had demonstrated in his sample.  The only different here is the use of CLR code vs. PowerShell (which is really CLR, but that’s another discussion). At this point, once the 2 zips are extracted, the Role’s file system looks as follows: Worker Role approot From there, the OnStart method (which also does the download and unzip using a simple StorageHelper class) kicks off the Java path and now you have Java! Task Manager Jetty Sample Page A couple of things I’m working on to enhance this is to extract the jre and jetty bits not to the appRoot but to a resource location defined as part of the service definition. ServiceDefinition.csdef <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="HostedJetty" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="JettyWorker"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="RemoteAccess" /> <Import moduleName="RemoteForwarder" /> </Imports> <Endpoints> <InputEndpoint name="JettyPort" protocol="tcp" port="80" localPort="8080" /> </Endpoints> <LocalResources> <LocalStorage name="Archives" cleanOnRoleRecycle="false" sizeInMB="100" /> </LocalResources>   As the concept matures a bit, being able to update dynamically the content or jar files as part of a running java solution is something that is possible through continued enhancement of this simple model. The Visual Studio 2010 Solution is located here: HostingJavaSln_NDA.zip

  Read the article

• AWS: setting up auto-scale for EC2 instances

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/16/aws-setting-up-auto-scale-for-ec2-instances.aspxWith Amazon Web Services, there’s no direct equivalent to Azure Worker Roles – no Elastic Beanstalk-style application for .NET background workers. But you can get the auto-scale part by configuring an auto-scaling group for your EC2 instance. This is a step-by-step guide, that shows you how to create the auto-scaling configuration, which for EC2 you need to do with the command line, and then link your scaling policies to CloudWatch alarms in the Web console. I’m using queue size as my metric for CloudWatch,  which is a good fit if your background workers are pulling messages from a queue and processing them.  If the queue is getting too big, the “high” alarm will fire and spin up a new instance to share the workload. If the queue is draining down, the “low” alarm will fire and shut down one of the instances. To start with, you need to manually set up your app in an EC2 VM, for a background worker that would mean hosting your code in a Windows Service (I always use Topshelf). If you’re dual-running Azure and AWS, then you can isolate your logic in one library, with a generic entry point that has Start() and Stop()  functions, so your Worker Role and Windows Service are essentially using the same code. When you have your instance set up with the Windows Service running automatically, and you’ve tested it starts up and works properly from a reboot, shut the machine down and take an image of the VM, using Create Image (EBS AMI) from the Web Console: When that completes, you’ll have your own AMI which you can use to spin up new instances, and you’re ready to create your auto-scaling group. You need to dip into the command-line tools for this, so follow this guide to set up the AWS autoscale command line tool. Now we’re ready to go. 1. Create a launch configuration This launch configuration tells AWS what to do when a new instance needs to be spun up. You create it with the as-create-launch-config command, which looks like this: as-create-launch-config sc-xyz-launcher # name of the launch config --image-id ami-7b9e9f12 # id of the AMI you extracted from your VM --region eu-west-1 # which region the new instance gets created in --instance-type t1.micro # size of the instance to create --group quicklaunch-1 #security group for the new instance 2. Create an auto-scaling group The auto-scaling group links to the launch config, and defines the overall configuration of the collection of instances: as-create-auto-scaling-group sc-xyz-asg # auto-scaling group name --region eu-west-1 # region to create in --launch-configuration sc-xyz-launcher # name of the launch config to invoke for new instances --min-size 1 # minimum number of nodes in the group --max-size 5 # maximum number of nodes in the group --default-cooldown 300 # period to wait (in seconds) after each scaling event, before checking if another scaling event is required --availability-zones eu-west-1a eu-west-1b eu-west-1c # which availability zones you want your instances to be allocated in – multiple entries means EC@ will use any of them 3. Create a scale-up policy The policy dictates what will happen in response to a scaling event being triggered from a “high” alarm being breached. It links to the auto-scaling group; this sample results in one additional node being spun up: as-put-scaling-policy scale-up-policy # policy name -g sc-psod-woker-asg # auto-scaling group the policy works with --adjustment 1 # size of the adjustment --region eu-west-1 # region --type ChangeInCapacity # type of adjustment, this specifies a fixed number of nodes, but you can use PercentChangeInCapacity to make an adjustment relative to the current number of nodes, e.g. increasing by 50% 4. Create a scale-down policy The policy dictates what will happen in response to a scaling event being triggered from a “low” alarm being breached. It links to the auto-scaling group; this sample results in one node from the group being taken offline: as-put-scaling-policy scale-down-policy -g sc-psod-woker-asg "--adjustment=-1" # in Windows, use double-quotes to surround a negative adjustment value –-type ChangeInCapacity --region eu-west-1 5. Create a “high” CloudWatch alarm We’re done with the command line now. In the Web Console, open up the CloudWatch view and create a new alarm. This alarm will monitor your metrics and invoke the scale-up policy from your auto-scaling group, when the group is working too hard. Configure your metric – this example will fire the alarm if there are more than 10 messages in my queue for over a minute: Then link the alarm to the scale-up policy in your group: 6. Create a “low” CloudWatch alarm The opposite of step 4, this alarm will trigger when the instances in your group don’t have enough work to do (e.g fewer than 2 messages in the queue for 1 minute), and will invoke the scale-down policy. And that’s it. You don’t need your original VM as the auto-scale group has a minimum number of nodes connected. You can test out the scaling by flexing your CloudWatch metric – in this example, filling up a queue from a  stub publisher – and watching AWS create new nodes as required, then stopping the publisher and watch AWS kill off the spare nodes.

  Read the article

• Apache FOP - Table top and bottom borders missing pagebreak inside table

  - by Thomas

  I am using Apache FOP to generate a PDF from a XLS FO document. I have created a test XLS FO document that contains a table with collapsed borders that with several tall rows. One of the rows starts on one page and ends on the next and this works as expected. The problem is that the bottom border of the table on the first page is missing and the top border of the table on the second pages is also missing. Below is the sample XLS FO document. <?xml version="1.0" encoding="utf-8"?> <fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <!-- defines the layout master --> <fo:layout-master-set> <fo:simple-page-master master-name="first" page-height="29.7cm" page-width="21cm" margin-top="1cm" margin-bottom="2cm" margin-left="2.5cm" margin-right="2.5cm"> <fo:region-body margin-top="3cm"/> <fo:region-before extent="3cm"/> <fo:region-after extent="1.5cm"/> </fo:simple-page-master> </fo:layout-master-set> <!-- starts actual layout --> <fo:page-sequence master-reference="first"> <fo:title>Sample Doc</fo:title> <fo:flow flow-name="xsl-region-body" font-size="x-small" font="Times New Roman"> <!-- table start --> <fo:table table-layout="fixed" width="100%" border-collapse="collapse"> <fo:table-column column-width="35mm"/> <fo:table-column column-width="100mm"/> <fo:table-column column-width="20mm"/> <fo:table-body> <fo:table-row> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Column 1</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Columns 2</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Column 3</fo:block> </fo:table-cell> </fo:table-row> <fo:table-row> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Row 1</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Some text</fo:block> </fo:table-cell> </fo:table-row> <fo:table-row> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Row 2</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Some text</fo:block> </fo:table-cell> </fo:table-row> <fo:table-row> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Row 3</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Some text</fo:block> </fo:table-cell> </fo:table-row> <fo:table-row> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Row 4</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Some text</fo:block> </fo:table-cell> </fo:table-row> <fo:table-row> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Row 5</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> <fo:block>Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum</fo:block> </fo:table-cell> <fo:table-cell border-width="0.5mm" border-style="solid"> <fo:block>Some text</fo:block> </fo:table-cell> </fo:table-row> </fo:table-body> </fo:table> <!-- table end --> </fo:flow> </fo:page-sequence> </fo:root> This Image shows the bottom border on page 1 missing and the top border on page 2 missing, but all text seams to be there: Please note that I have allready experimented with using an empty header and footer with borders, for example. This works, but I need to use these functions for other things than fixing this issue so what I need to know is if there is an other sollution to the problem?

  Read the article

• SQL SERVER – Simple Example to Configure Resource Governor – Introduction to Resource Governor

  - by pinaldave

  Let us jump right away with question and answer mode. What is resource governor? Resource Governor is a feature which can manage SQL Server Workload and System Resource Consumption. We can limit the amount of CPU and memory consumption by limiting /governing /throttling on the SQL Server. Why is resource governor required? If there are different workloads running on SQL Server and each of the workload needs different resources or when workloads are competing for resources with each other and affecting the performance of the whole server resource governor is a very important task. What will be the real world example of need of resource governor? Here are two simple scenarios where the resource governor can be very useful. Scenario 1: A server which is running OLTP workload and various resource intensive reports on the same server. The ideal situation is where there are two servers which are data synced with each other and one server runs OLTP transactions and the second server runs all the resource intensive reports. However, not everybody has the luxury to set up this kind of environment. In case of the situation where reports and OLTP transactions are running on the same server, limiting the resources to the reporting workload it can be ensured that OTLP’s critical transaction is not throttled. Scenario 2: There are two DBAs in one organization. One DBA A runs critical queries for business and another DBA B is doing maintenance of the database. At any point in time the DBA A’s work should not be affected but at the same time DBA B should be allowed to work as well. The ideal situation is that when DBA B starts working he get some resources but he can’t get more than defined resources. Does SQL Server have any default resource governor component? Yes, SQL Server have two by default created resource governor component. 1) Internal –This is used by database engine exclusives and user have no control. 2) Default – This is used by all the workloads which are not assigned to any other group. What are the major components of the resource governor? Resource Pools Workload Groups Classification In simple words here is what the process of resource governor is. Create resource pool Create a workload group Create classification function based on the criteria specified Enable Resource Governor with classification function Let me further explain you the same with graphical image. Is it possible to configure resource governor with T-SQL? Yes, here is the code for it with explanation in between. Step 0: Here we are assuming that there are separate login accounts for Reporting server and OLTP server. /*----------------------------------------------- Step 0: (Optional and for Demo Purpose) Create Two User Logins 1) ReportUser, 2) PrimaryUser Use ReportUser login for Reports workload Use PrimaryUser login for OLTP workload -----------------------------------------------*/ Step 1: Creating Resource Pool We are creating two resource pools. 1) Report Server and 2) Primary OLTP Server. We are giving only a few resources to the Report Server Pool as described in the scenario 1 the other server is mission critical and not the report server. ----------------------------------------------- -- Step 1: Create Resource Pool ----------------------------------------------- -- Creating Resource Pool for Report Server CREATE RESOURCE POOL ReportServerPool WITH ( MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30, MIN_MEMORY_PERCENT=0, MAX_MEMORY_PERCENT=30) GO -- Creating Resource Pool for OLTP Primary Server CREATE RESOURCE POOL PrimaryServerPool WITH ( MIN_CPU_PERCENT=50, MAX_CPU_PERCENT=100, MIN_MEMORY_PERCENT=50, MAX_MEMORY_PERCENT=100) GO Step 2: Creating Workload Group We are creating two workloads each mapping to each of the resource pool which we have just created. ----------------------------------------------- -- Step 2: Create Workload Group ----------------------------------------------- -- Creating Workload Group for Report Server CREATE WORKLOAD GROUP ReportServerGroup USING ReportServerPool ; GO -- Creating Workload Group for OLTP Primary Server CREATE WORKLOAD GROUP PrimaryServerGroup USING PrimaryServerPool ; GO Step 3: Creating user defiled function which routes the workload to the appropriate workload group. In this example we are checking SUSER_NAME() and making the decision of Workgroup selection. We can use other functions such as HOST_NAME(), APP_NAME(), IS_MEMBER() etc. ----------------------------------------------- -- Step 3: Create UDF to Route Workload Group ----------------------------------------------- CREATE FUNCTION dbo.UDFClassifier() RETURNS SYSNAME WITH SCHEMABINDING AS BEGIN DECLARE @WorkloadGroup AS SYSNAME IF(SUSER_NAME() = 'ReportUser') SET @WorkloadGroup = 'ReportServerGroup' ELSE IF (SUSER_NAME() = 'PrimaryServerPool') SET @WorkloadGroup = 'PrimaryServerGroup' ELSE SET @WorkloadGroup = 'default' RETURN @WorkloadGroup END GO Step 4: In this final step we enable the resource governor with the classifier function created in earlier step 3. ----------------------------------------------- -- Step 4: Enable Resource Governer -- with UDFClassifier ----------------------------------------------- ALTER RESOURCE GOVERNOR WITH (CLASSIFIER_FUNCTION=dbo.UDFClassifier); GO ALTER RESOURCE GOVERNOR RECONFIGURE GO Step 5: If you are following this demo and want to clean up your example, you should run following script. Running them will disable your resource governor as well delete all the objects created so far. ----------------------------------------------- -- Step 5: Clean Up -- Run only if you want to clean up everything ----------------------------------------------- ALTER RESOURCE GOVERNOR WITH (CLASSIFIER_FUNCTION = NULL) GO ALTER RESOURCE GOVERNOR DISABLE GO DROP FUNCTION dbo.UDFClassifier GO DROP WORKLOAD GROUP ReportServerGroup GO DROP WORKLOAD GROUP PrimaryServerGroup GO DROP RESOURCE POOL ReportServerPool GO DROP RESOURCE POOL PrimaryServerPool GO ALTER RESOURCE GOVERNOR RECONFIGURE GO I hope this introductory example give enough light on the subject of Resource Governor. In future posts we will take this same example and learn a few more details. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Resource Governor

  Read the article

• Find only physical network adapters with WMI Win32_NetworkAdapter class

  - by Mladen Prajdic

  WMI is Windows Management Instrumentation infrastructure for managing data and machines. We can access it by using WQL (WMI querying language or SQL for WMI). One thing to remember from the WQL link is that it doesn't support ORDER BY. This means that when you do SELECT * FROM wmiObject, the returned order of the objects is not guaranteed. It can return adapters in different order based on logged-in user, permissions of that user, etc… This is not documented anywhere that I've looked and is derived just from my observations. To get network adapters we have to query the Win32_NetworkAdapter class. This returns us all network adapters that windows detect, real and virtual ones, however it only supplies IPv4 data. I've tried various methods of combining properties that are common on all systems since Windows XP. The first thing to do to remove all virtual adapters (like tunneling, WAN miniports, etc…) created by Microsoft. We do this by adding WHERE Manufacturer!='Microsoft' to our WMI query. This greatly narrows the number of adapters we have to work with. Just on my machine it went from 20 adapters to 5. What was left were one real physical Realtek LAN adapter, 2 virtual adapters installed by VMware and 2 virtual adapters installed by VirtualBox. If you read the Win32_NetworkAdapter help page you'd notice that there's an AdapterType that enumerates various adapter types like LAN or Wireless and AdapterTypeID that gives you the same information as AdapterType only in integer form. The dirty little secret is that these 2 properties don't work. They are both hardcoded, AdapterTypeID to "0" and AdapterType to "Ethernet 802.3". The only exceptions I've seen so far are adapters that have no values at all for the two properties, "RAS Async Adapter" that has values of AdapterType = "Wide Area Network" and AdapterTypeID = "3" and various tunneling adapters that have values of AdapterType = "Tunnel" and AdapterTypeID = "15". In the help docs there isn't even a value for 15. So this property was of no help. Next property to give hope is NetConnectionId. This is the name of the network connection as it appears in the Control Panel -> Network Connections. Problem is this value is also localized into various languages and can have different names for different connection. So both of these properties don't help and we haven't even started talking about eliminating virtual adapters. Same as the previous one this property was also of no help. Next two properties I checked were ConfigManagerErrorCode and NetConnectionStatus in hopes of finding disabled and disconnected adapters. If an adapter is enabled but disconnected the ConfigManagerErrorCode = 0 with different NetConnectionStatus. If the adapter is disabled it reports ConfigManagerErrorCode = 22. This looked like a win by using (ConfigManagerErrorCode=0 or ConfigManagerErrorCode=22) in our condition. This way we get enabled (connected and disconnected adapters). Problem with all of the above properties is that none of them filter out the virtual adapters installed by virtualization software like VMware and VirtualBox. The last property to give hope is PNPDeviceID. There's an interesting observation about physical and virtual adapters with this property. Every virtual adapter PNPDeviceID starts with "ROOT\". Even VMware and VirtualBox ones. There were some really, really old physical adapters that had PNPDeviceID starting with "ROOT\" but those were in pre win XP era AFAIK. Since my minimum system to check was Windows XP SP2 I didn't have to worry about those. The only virtual adapter I've seen to not have PNPDeviceID start with "ROOT\" is the RAS Async Adapter for Wide Area Network. But because it is made by Microsoft we've eliminated it with the first condition for the manufacturer. Using the PNPDeviceID has so far proven to be really effective and I've tested it on over 20 different computers of various configurations from Windows XP laptops with wireless and bluetooth cards to virtualized Windows 2008 R2 servers. So far it always worked as expected. I will appreciate you letting me know if you find a configuration where it doesn't work. Let's see some C# code how to do this: ManagementObjectSearcher mos = null;// WHERE Manufacturer!='Microsoft' removes all of the // Microsoft provided virtual adapters like tunneling, miniports, and Wide Area Network adapters.mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft'");// Trying the ConfigManagerErrorCode and NetConnectionStatus variations // proved to still not be enough and it returns adapters installed by // the virtualization software like VMWare and VirtualBox// ConfigManagerErrorCode = 0 -> Device is working properly. This covers enabled and/or disconnected devices// ConfigManagerErrorCode = 22 AND NetConnectionStatus = 0 -> Device is disabled and Disconnected. // Some virtual devices report ConfigManagerErrorCode = 22 (disabled) and some other NetConnectionStatus than 0mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft' AND (ConfigManagerErrorCode = 0 OR (ConfigManagerErrorCode = 22 AND NetConnectionStatus = 0))");// Final solution with filtering on the Manufacturer and PNPDeviceID not starting with "ROOT\"// Physical devices have PNPDeviceID starting with "PCI\" or something else besides "ROOT\"mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft' AND NOT PNPDeviceID LIKE 'ROOT\\%'");// Get the physical adapters and sort them by their index. // This is needed because they're not sorted by defaultIList<ManagementObject> managementObjectList = mos.Get() .Cast<ManagementObject>() .OrderBy(p => Convert.ToUInt32(p.Properties["Index"].Value)) .ToList();// Let's just show all the properties for all physical adapters.foreach (ManagementObject mo in managementObjectList){ foreach (PropertyData pd in mo.Properties) Console.WriteLine(pd.Name + ": " + (pd.Value ?? "N/A"));}   That's it. Hope this helps you in some way.

  Read the article

• Oracle Database 12c Spatial: Vector Performance Acceleration

  - by Okcan Yasin Saygili-Oracle

  Most business information has a location component, such as customer addresses, sales territories and physical assets. Businesses can take advantage of their geographic information by incorporating location analysis and intelligence into their information systems. This allows organizations to make better decisions, respond to customers more effectively, and reduce operational costs – increasing ROI and creating competitive advantage. Oracle Database, the industry’s most advanced database,  includes native location capabilities, fully integrated in the kernel, for fast, scalable, reliable and secure spatial and massive graph applications. It is a foundation for deploying enterprise-wide spatial information systems and locationenabled business applications. Developers can extend existing Oracle-based tools and applications, since they can easily incorporate location information directly in their applications, workflows, and services. Spatial Features The geospatial data features of Oracle Spatial and Graph option support complex geographic information systems (GIS) applications, enterprise applications and location services applications. Oracle Spatial and Graph option extends the spatial query and analysis features included in every edition of Oracle Database with the Oracle Locator feature, and provides a robust foundation for applications that require advanced spatial analysis and processing in the Oracle Database. It supports all major spatial data types and models, addressing challenging business-critical requirements from various industries, including transportation, utilities, energy, public sector, defense and commercial location intelligence. Network Data Model Graph Features The Network Data Model graph explicitly stores and maintains a persistent data model withnetwork connectivity and provides network analysis capability such as shortest path, nearest neighbors, within cost and reachability. It loads partitioned networks into memory on demand, overcomingthe limitations of in-memory analysis. Partitioning massive networks into manageable sub-networkssimplifies the network analysis. RDF Semantic Graph Features RDF Semantic Graph has native support for World Wide Web Consortium standards. It has open, scalable, and secure features for storing RDF/OWL ontologies anddata; native inference with OWL 2, SKOS and user-defined rules; and querying RDF/OWL data withSPARQL 1.1, Java APIs, and SPARQLgraph patterns in SQL. Video: Oracle Spatial and Graph Overview Oracle spatial is embeded on oracle database product. So ,we can use oracle installer (OUI).The Oracle Universal Installer (OUI) is used to install Oracle Database software. OUI is a graphical user interface utility that enables you to view the Oracle software that is installed on your machine, install new Oracle Database software, and delete Oracle software that you no longer need to use. Online Help is available to guide you through the installation process. One of the installation options is to create a database. If you select database creation, OUI automatically starts Oracle Database Configuration Assistant (DBCA) to guide you through the process of creating and configuring a database. If you do not create a database during installation, you must invoke DBCA after you have installed the software to create a database. You can also use DBCA to create additional databases. For installing Oracle Database 12c you may check the Installing Oracle Database Software and Creating a Database tutorial under the Oracle Database 12c 2-Day DBA Series.You can always check if spatial is available in your database using  "select comp_id, version, status, comp_name from dba_registry where comp_id='SDO';"   One of the most notable improvements with Oracle Spatial and Graph 12c can be seen in performance increases in vector data operations. Enabling the Spatial Vector Acceleration feature (available with the Spatial option) dramatically improves the performance of commonly used vector data operations, such as sdo_distance, sdo_aggr_union, and sdo_inside. With 12c, these operations also run more efficiently in parallel than in prior versions through the use of metadata caching. For organizations that have been facing processing limitations, these enhancements enable developers to make a small set of configuration changes and quickly realize significant performance improvements. Results include improved index performance, enhanced geometry engine performance, optimized secondary filter optimizations for Spatial operators, and improved CPU and memory utilization for many advanced vector functions. Vector performance acceleration is especially beneficial when using Oracle Exadata Database Machine and other large-scale systems. Oracle Spatial and Graph vector performance acceleration builds on general improvements available to all SDO_GEOMETRY operations in these areas: Caching of index metadata, Concurrent update mechanisms, and Optimized spatial predicate selectivity and cost functions. These optimizations enable more efficient use of: CPU, Memory, and Partitioning Resulting in substantial query performance improvements.UsageTo accelerate the performance of spatial operators, it is recommended that you set the SPATIAL_VECTOR_ACCELERATION database system parameter to the value TRUE. (This parameter is authorized for use only by licensed Oracle Spatial users, and its default value is FALSE.) You can set this parameter for the whole system or for a single session. To set the value for the whole system, do either of the following:Enter the following statement from a suitably privileged account:   ALTER SYSTEM SET SPATIAL_VECTOR_ACCELERATION = TRUE;Add the following to the database initialization file (xxxinit.ora):   SPATIAL_VECTOR_ACCELERATION = TRUE;To set the value for the current session, enter the following statement from a suitably privileged account:   ALTER SESSION SET SPATIAL_VECTOR_ACCELERATION = TRUE; Checkout the complete list of new features on Oracle.com @ http://www.oracle.com/technetwork/database/options/spatialandgraph/overview/index.html Spatial and Graph Data Sheet (PDF) Spatial and Graph White Paper (PDF)

  Read the article

• Getting Started with Prism (aka Composite Application Guidance for WPF and Silverlight)

  - by dotneteer

  Overview Prism is a framework from the Microsoft Patterns and Practice team that allow you to create WPF and Silverlight in a modular way. It is especially valuable for larger projects in which a large number of developers can develop in parallel. Prism achieves its goal by supplying several services: · Dependency Injection (DI) and Inversion of control (IoC): By using DI, Prism takes away the responsibility of instantiating and managing the life time of dependency objects from individual components to a container. Prism relies on containers to discover, manage and compose large number of objects. By varying the configuration, the container can also inject mock objects for unit testing. Out of the box, Prism supports Unity and MEF as container although it is possible to use other containers by subclassing the Bootstrapper class. · Modularity and Region: Prism supplies the framework to split application into modules from the application shell. Each module is a library project that contains both UI and code and is responsible to initialize itself when loaded by the shell. Each window can be further divided into regions. A region is a user control with associated model. · Model, view and view-model (MVVM) pattern: Prism promotes the user MVVM. The use of DI container makes it much easier to inject model into view. WPF already has excellent data binding and commanding mechanism. To be productive with Prism, it is important to understand WPF data binding and commanding well. · Event-aggregation: Prism promotes loosely coupled components. Prism discourages for components from different modules to communicate each other, thus leading to dependency. Instead, Prism supplies an event-aggregation mechanism that allows components to publish and subscribe events without knowing each other. Architecture In the following, I will go into a little more detail on the services provided by Prism. Bootstrapper In a typical WPF application, application start-up is controls by App.xaml and its code behind. The main window of the application is typically specified in the App.xaml file. In a Prism application, we start a bootstrapper in the App class and delegate the duty of main window to the bootstrapper. The bootstrapper will start a dependency-injection container so all future object instantiations are managed by the container. Out of box, Prism provides the UnityBootstrapper and MefUnityBootstrapper abstract classes. All application needs to either provide a concrete implementation of one of these bootstrappers, or alternatively, subclass the Bootstrapper class with another DI container. A concrete bootstrapper class must implement the CreateShell method. Its responsibility is to resolve and create the Shell object through the DI container to serve as the main window for the application. The other important method to override is ConfigureModuleCatalog. The bootstrapper can register modules for the application. In a more advance scenario, an application does not have to know all its modules at compile time. Modules can be discovered at run time. Readers to refer to one of the Open Modularity Quick Starts for more information. Modules Once modules are registered with or discovered by Prism, they are instantiated by the DI container and their Initialize method is called. The DI container can inject into a module a region registry that implements IRegionViewRegistry interface. The module, in its Initialize method, can then call RegisterViewWithRegion method of the registry to register its regions. Regions Regions, once registered, are managed by the RegionManager. The shell can then load regions either through the RegionManager.RegionName attached property or dynamically through code. When a view is created by the region manager, the DI container can inject view model and other services into the view. The view then has a reference to the view model through which it can interact with backend services. Service locator Although it is possible to inject services into dependent classes through a DI container, an alternative way is to use the ServiceLocator to retrieve a service on demard. Prism supplies a service locator implementation and it is possible to get an instance of the service by calling: ServiceLocator.Current.GetInstance<IServiceType>() Event aggregator Prism supplies an IEventAggregator interface and implementation that can be injected into any class that needs to communicate with each other in a loosely-coupled fashion. The event aggregator uses a publisher/subscriber model. A class can publishes an event by calling eventAggregator.GetEvent<EventType>().Publish(parameter) to raise an event. Other classes can subscribe the event by calling eventAggregator.GetEvent<EventType>().Subscribe(EventHandler, other options). Getting started The easiest way to get started with Prism is to go through the Prism Hands-On labs and look at the Hello World QuickStart. The Hello World QuickStart shows how bootstrapper, modules and region works. Next, I would recommend you to look at the Stock Trader Reference Implementation. It is a more in depth example that resemble we want to set up an application. Several other QuickStarts cover individual Prism services. Some scenarios, such as dynamic module discovery, are more advanced. Apart from the official prism document, you can get an overview by reading Glen Block’s MSDN Magazine article. I have found the best free training material is from the Boise Code Camp. To be effective with Prism, it is important to understands key concepts of WPF well first, such as the DependencyProperty system, data binding, resource, theme and ICommand. It is also important to know your DI container of choice well. I will try to explorer these subjects in depth in the future. Testimony Recently, I worked on a desktop WPF application using Prism. I had a wonderful experience with Prism. The Prism is flexible enough even in the presence of third party controls such as Telerik WPF controls. We have never encountered any significant obstacle.

  Read the article

• Dual Boot Oracle Solaris 11/11 and Linux (Ubuntu 11.10/grub2)

  - by HartmutStreppel

  After having worked with Open Solaris on my laptop first, then with an upgrade to Oracle Solaris 11 Express, I finally did a fresh install of Oracle Solaris 11/11, when it became available. I am not a big fan of upgrades as I know that I am not the perfect administrator and my system gets spoiled with unclean configurations, outdated packages and wrong settings that cannot be reversed. So I prefer to start from scratch. Especially with Oracle Solaris 11 I wanted to have a system just like a customer would have it in production. The installation was smooth - more or less, if I had only read the documentation a bit better in advance. For a number of reasons I prefer a dual boot system. The most important one is, that especially with mobile devices you often run into network problems. And you have a hard time figuring out where the problem is: in your laptop hardware, in the OS you are running, or really within the network. If you have an alternate OS to boot, you can exclude the OS and your hardware. This makes you feel better. The second OS should be a Linux variant - and for some not so obvious reason I decided to go with the latest Ubuntu release (11.10). It replaced a very old Open Suse installation that had not been booted for a while. I knew that it was probably best to install Ubuntu first and then Oracle Solaris 11, as this would put the right boot information for Oracle Solaris  into the MBR and onto the root partition. But then, how to enable dual boot with the 2 OSes. Searching the web one mainly finds information about dual boot of: Linux and Linux Linux and Windows I do not want to explain which wrong configurations I worked through, but I prefer to explain the final setup, which is extremely simple, and I am wondering why this is not covered as the easiest solution for most dual boot setups. I use chainloader from and to both OS'es, with the only disadvantage that I have to confirm two grub menus each time I want to boot the "other" OS. Still there were some hurdles to jump over: Ubuntu did not like getting its boot blocks being placed on the partition instead of the disk; I must admit that I do not fully understand why. But using the --force option you could get that done Ubuntu needs an active partition; that was easy to achieve grub2 uses a different numbering scheme for the partitions. That is in the docs, if you read them. BTW: The usual disclaimer is valid. There is  no guarantee that what I describe works or works well. Please back up your data carefully before trying any of this. So, Oracle Solaris 11 is installed on the first partition and Ubuntu on the third. With Ubtuntu things initially were a bit more complicated, as I did not know how to boot it. And the live CD did not offer the capability to boot the on-disk image (at least I did not find it). So I booted the live CD, mounted the Ubuntu installation at /mnt and wrote the boot blocks into the partition. This is something that does not seem to be recommended, at least grub-install refrained from doing what I intended. After a bit more research I was bold enough to use the --force option and wrote the boot blocks to /dev/sda3 using grub-install --boot-directory=/mnt/boot --force --no-floppy /dev/sda3 So, I now had a system with the Solaris boot loader in the MBR, Solaris specific boot blocks on the Solaris root partition and Ubuntu specific boot blocks in the Ubuntu partition. I just had to chain them together and I was done. Oracle Solaris 11: I have added the following lines to /rpool/boot/grub/menu.lst (be aware of the /rpool!!!!) title Ubuntu 11.10root (hd0,2)makeactivechainloader +1boot The Ubuntu root file system sits on the third partition (/dev/sda3). Ubuntu: I have added the following lines to /etc/grub.d/40_custom: menuentry "Solaris 11/11" {      set root=(hd0,1)      chainloader +1} Two things need to be mentioned: a) grub2 starts numbering partitions with 1; so my /dev/sda1 is partition 1. b) Oracle Solaris boots without the partition being made active (btw: the command to make a partition active with grub2 is "parttool (hd0,1) boot+", which currently does not work for me). As debugging grub is a bit complicated, I used the grub CLI to perform some tests and also used a tool, that I found on sourceforge.net that was able to prepare a list of all boot loaders on all partitions. This told me that the basic setup was correct. Unfortunately I lost it in the live CD environment. I hope this is helpful for some of the readers.Hartmut

  Read the article

• Stir Trek: Iron Man Edition Recap and Photos

  - by Brian Jackett

  If you’ve noticed my blogging activity has reduced in frequency and technical content lately it’s primarily due to all of the conferences I’ve been attending, speaking at, or planning in the past few months.  This past Friday myself and six other dedicated individuals put on Stir Trek: Iron Man Edition as the culmination of a few months of hard work.  For those unfamiliar, Stir Trek is a web developer conference that was founded last year as an event to showcase content from Microsoft’s MIX conference and end the day with a private showing of the then just-released Star Trek movie.  This year’s conference expanded from 2 to 4 content tracks and upped the number of tickets from 350 to 600.  Even more amazing was the fact that we had 592 people show up day of the event for the lowest drop-off percentage of any conference I’ve been to before.   Nerd Dinner and Swag Bags     The night before Stir Trek: Iron Man Edition we hosted a nerd dinner at the Polaris Shopping mall food court with about 30 in attendance.  Nerd dinners are a great time to meet others passionate about technology and socialize before the whirlwind of the conference hits.  After the nerd dinner 20+ volunteers headed to the conference location and helped us stuff swag bags.  This in and of itself was a monumental task of putting together 600 swag bags with numerous leaflets, sponsor items, and t-shirts.  A big thanks goes out to all who assisted us that night so that we could finish in just under 2 hours instead of taking all night.  My sleep schedule also thanks you. Morning of Stir Trek     After getting a decent amount of sleep I arrived at Marcus Crosswoods theater at 6am to begin setting up for the day.  Myself and Jody Morgan were in charge of registration so we got tables set up, laid out swag bags, and organized our volunteer crew to assist with checking-in attendees.  Despite having 600+ people registration went fairly smoothly and got the day off to a great start.  I especially appreciated the 3+ cups of coffee from Crimson Cup, a local coffee shop.  For any of you that know me you’ll know that I rarely drink coffee except a few times a year when I really need the energy, so that says a lot about how good their coffee is.   Conference Starts     Once registration was completed the day kicked off with Molly Holzschlag keynoting.  Unfortunately Molly suffered from an ear infection and wasn’t able to fly so she had a virtual keynote and a session later in the day.  I was working behind the scenes on various tasks so I was only able to drop in very briefly on the keynote and rest of the morning sessions.  Throughout the day I tried to grab at least 1 or 2 pics of each presenter.  See my album below for the full set of pics.      For lunch we ordered around 150 pizzas from Mellow Mushroom, a local pizza place (notice the theme of supporting local businesses.)  Early on we were concerned about Mellow Mushroom being able to supply that many pizzas and get them delivered (still hot) to the theater, but they did an excellent job day of the event.  I wish I had gotten some pictures of the old school VW van they delivered the pizza in, but I was just a bit busy running around trying to get theaters ready for lunch.  We had attendees from last year who specifically requested that we have Mellow Mushroom supply lunch this year and I’m glad everything worked out being able to use them again.     During the afternoon I was able to attend a few sessions and hear some great content from various speakers.  It was also nice to just sit down and get off my feet for a bit.  After the last sessions the day concluded with a raffle.  There were a few logistical and technical issues that hampered our ability to smoothly conduct the raffle.  To those of you that agree the raffle wasn’t the smoothest experience I would like to say that the Stir Trek planning committee has already begun meeting to discuss ways of improving the conference for next year.  We are also accepting feedback (both positive and negative) at the following link: click here.  If you don’t wish to use the Joind In site you can also email me directly and I’ll be sure to pass along the feedback.   Iron Man 2 Movie     Last but not least, what Stir Trek event would be complete without the feature movie.  This year’s movie was Iron Man 2.  The theater had some really cool props and promotions (see pic below) for the movie.  I really enjoyed Iron Man 2, but I would recommend brushing up on the Iron Man comics and Marvel’s plans for future movies to understand some of the plot elements that come up.  Also make sure you stay through to the end of the movie credits to see a sneak peak of something special, that’s all I’ll say. Conclusion     Again a big thanks goes out to all of the speakers, sponsors, attendees, movie theater staff, volunteers, and everyone else involved in making this event great.  Also big thanks to my fellow Stir Trek planning committee members: Jeff Blankenburg, Matt Casto, Carey Payette, Jody Morgan, Rick Kierner, and Sarah Dutkiewitcz.  I am grateful for everything I learned while helping plan this event and look forward to being involved again next year.  For those interested we are currently targeting Thor as our movie theme for 2011 and then The Avengers for 2012.  These are tentative based on release dates that could shift as we get closer, but for now look solid.   Photos Pics on Facebook (includes tagging)     Stir Trek: Iron Man Edition photos on Facebook Pics on Live site (higher res)      View Full Album         -Frog Out

  Read the article

• WebLogic 12.1.2 launch webcast on-demand & WebLogic Community feedback

  - by JuergenKress

  You missed the WebLogic & Coherence & JDeveloper 12.1.2 launch Webcast? Watch it on-demand: View On-Demand Version Read the Q&A from this Webcast Special thanks for Frank Munz and Simon Haslams our WebLogic Community experts on the phone!Thanks for the community for the great twitter feedback send us your tweets @wlscommunity #WebLogicCommunity WebLogic Community Join the #WebLogic Partner Community for the latest WebLogic 12.1.2 details and upcoming trainings http://www.WeblogicCommunity.com #OracleCAF Oracle WebLogic ?Unified update, patch, install process is a key component in reducing Ops cost in #WebLogic 12c #OracleCAF WebLogic Community Demo time #WebLogic cluster creation in seconds #OracleCAF by @mike_lehmann & Will Lyons #WebLogicCommunity pic.twitter.com/gyb8YqnKco Oracle WebLogic ?Dynamic server clusters to scale apps - coming up in #WebLogic 12c launch. #OracleCAF http://pub.vitrue.com/lBmE Oracle WebLogic ?Key feature of #WebLogic 12.1.2 release: @Oracle Database 12c integration. #OracleCAF #OracleDB OTNArchBeat ?Many tech posts on #weblogic available on #oracleace Rene van Wijk's blog. #OracleCAF http://pub.vitrue.com/O9Cn Frank Munz ?Correct me if I am wrong, but this could be the first WebLogic 12.1.2 training ever: http://www.ausoug.org.au/insync13/insync13-frank-munz.html … Cloud Foundation ?.#WebLogic 12.1.2 deep dive starts NOW during #OracleCAF launch. #Coherence up next in a few minutes. http://pub.vitrue.com/HPHM Maciej Gruszka ?Watch http://www.youtube.com/watch?v=KiCoO_QGBsU&feature=c4-overview&list=UUrEIV9YO17leE9aJWamKEPw … at #WebLogic channel with @dave_cabelus about Elastic JMS Oracle WebLogic ?Pick up the new book by @frankmunz on WLS 12c http://amzn.to/1ceppgZ #WebLogic #OracleCAF OTNArchBeat ?@OTNArchBeat 31 Jul @frankmunz 's #WebLogic YouTube channel >> watch and learn #OracleCAF http://pub.vitrue.com/B4IM WebLogic Community ?@frankmunz WebLogic expert build elastic clouds with #WebLogic http://www.munzandmore.com/blog #OracleCAF #WebLogicCommunity pic.twitter.com/UK5UKjXUVl OTNArchBeat @frankmunz 's blog, covering #weblog #cloud and more #OracleCAF http://pub.vitrue.com/N8ST OTNArchBeat ?oracladmin: @simon_haslam 's Oracle Fusion Middleware blog #OracleCAF #oracleace http://pub.vitrue.com/cwGx Yuri Grinshteyn ?Coherence uses WLS tooling, including deployment, and can be part of the WLS cluster. Well done there. #OracleCAF Maciej Gruszka ?#Coherence 12.1.2 auto updates data grid on changes inside DB thru #GoldenGate HotCache - another cool feature of #OracleCAF Oracle WebLogic ?From #OracleCAF launch: Tight integration tween WLS, #Coherence and #OracleDB. Dynamic clusters, OSS support & more http://pub.vitrue.com/3NL9 OTNArchBeat ?25 recent no-fluff technical articles on Oracle WebLogic #OracleCAF http://pub.vitrue.com/FEG5 Maciej Gruszka ?@dave_cabelus Elastic JMS is my favourite capability of #WebLogic 12.1.2 WebLogic Community ?Dynamic WebLogic Clustering COOL - what is Wour favorite 12.1.2 feature? #OracleCAF #WebLogicCommunity pic.twitter.com/T8lvDMJ1U0 WebLogic Community ?What is the coolest #WebLogic 12.1.2 feature? Let us know @wlscommunity http://weblogiccommunity.com/2013/07/30/launch-webcast-weblogic-coherence-jdeveloper-adf-12-1-2-00-july-31st-2013/ … #WebLogicCommunity Simon Haslam ?I'm speaking(!) on the panel session with @frankmunz & Matt Rosen on the CAF/WebLogic 12.1.2 launch: 6pm UK today https://event.on24.com/eventRegistration/EventLobbyServlet?target=registration.jsp&eventid=651242&partnerref=CAF_Launch_OCOM_07312013&sourcepage=register … Markus Eisele ?#WebLogic 12.1.2 - an Important New Release for Middleware Admins http://bit.ly/1cmtqhX by @simon_haslam OracleEnterpriseMgr ?The JVM diagnostics features of #EM12c are now shown in a demo by @hawkinsg1 at the #OracleCAF launch http://bit.ly/caflaunch Shaun Smith ?Curious about the new #Coherence 12.1.2 GoldenGate HotCache feature? I explain all on youtube: http://www.youtube.com/watch?v=O0TIG3hgbg0&feature=share&list=PLxqhEJ4CA3JtQwuPS8Qmd88lGX-gsIbHV … #OracleCAF Maciej Gruszka ?Try for Yourself -- Download the products Oracle WebLogic 12.1.2: http://www.oracle.com/technetwork/middleware/fusion-middleware/downloads/index.html … Oracle Coherence 12c: http://www.oracle.com/technetwork/middleware/coherence/downloads/index.htm … WebLogic Community ?What is Your favorite feature in #WebLogic 12.1.2 ? cool stuff! #OracleCAF #WebLogicCommunity http://WeblogicCommunity.com pic.twitter.com/xjR05tiaQj We encourage you to learn more about all the products by reviewing the following resources: Try for Yourself -- Download the products Oracle WebLogic 12.1.2 Oracle Coherence 12c Enterprise Manager Developer Tools WebLogic Community blog Learn more Read the Oracle WebLogic Business Whitepaper Read the Oracle Coherence Business Whitepaper Read the Oracle WebLogic and Oracle Database Integration Whitepaper Get Training from Oracle University Check out the Oracle WebLogic YouTube Channel Check out the Oracle Coherence YouTube Channel WebLogic Partner Community Registration The Webcast is available on-demand Watch Webcast Now WebLogic Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Weblogic 12.1.2,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• SQL SERVER – SQL in Sixty Seconds – 5 Videos from Joes 2 Pros Series – SQL Exam Prep Series 70-433

  - by pinaldave

  Joes 2 Pros SQL Server Learning series is indeed fun. Joes 2 Pros series is written for beginners and who wants to build expertise for SQL Server programming and development from fundamental. In the beginning of the series author Rick Morelan is not shy to explain the simplest concept of how to open SQL Server Management Studio. Honestly the book starts with that much basic but as it progresses further Rick discussing about various advanced concepts from query tuning to Core Architecture. This five part series is written with keeping SQL Server Exam 70-433. Instead of just focusing on what will be there in exam, this series is focusing on learning the important concepts thoroughly. This book no way take short cut to explain any concepts and at times, will go beyond the topic at length. The best part is that all the books has many companion videos explaining the concepts and videos. Every Wednesday I like to post a video which explains something in quick few seconds. Today we will go over five videos which I posted in my earlier posts related to Joes 2 Pros series. Introduction to XML Data Type Methods – SQL in Sixty Seconds #015 The XML data type was first introduced with SQL Server 2005. This data type continues with SQL Server 2008 where expanded XML features are available, most notably is the power of the XQuery language to analyze and query the values contained in your XML instance. There are five XML data type methods available in SQL Server 2008: query() – Used to extract XML fragments from an XML data type. value() – Used to extract a single value from an XML document. exist() – Used to determine if a specified node exists. Returns 1 if yes and 0 if no. modify() – Updates XML data in an XML data type. node() – Shreds XML data into multiple rows (not covered in this blog post). [Detailed Blog Post] | [Quiz with Answer] Introduction to SQL Error Actions – SQL in Sixty Seconds #014 Most people believe that when SQL Server encounters an error severity level 11 or higher the remaining SQL statements will not get executed. In addition, people also believe that if any error severity level of 11 or higher is hit inside an explicit transaction, then the whole statement will fail as a unit. While both of these beliefs are true 99% of the time, they are not true in all cases. It is these outlying cases that frequently cause unexpected results in your SQL code. To understand how to achieve consistent results you need to know the four ways SQL Error Actions can react to error severity levels 11-16: Statement Termination – The statement with the procedure fails but the code keeps on running to the next statement. Transactions are not affected. Scope Abortion – The current procedure, function or batch is aborted and the next calling scope keeps running. That is, if Stored Procedure A calls B and C, and B fails, then nothing in B runs but A continues to call C. @@Error is set but the procedure does not have a return value. Batch Termination – The entire client call is terminated. XACT_ABORT – (ON = The entire client call is terminated.) or (OFF = SQL Server will choose how to handle all errors.) [Detailed Blog Post] | [Quiz with Answer] Introduction to Basics of a Query Hint – SQL in Sixty Seconds #013 Query hints specify that the indicated hints should be used throughout the query. Query hints affect all operators in the statement and are implemented using the OPTION clause. Cautionary Note: Because the SQL Server Query Optimizer typically selects the best execution plan for a query, it is highly recommended that hints be used as a last resort for experienced developers and database administrators to achieve the desired results. [Detailed Blog Post] | [Quiz with Answer] Introduction to Hierarchical Query – SQL in Sixty Seconds #012 A CTE can be thought of as a temporary result set and are similar to a derived table in that it is not stored as an object and lasts only for the duration of the query. A CTE is generally considered to be more readable than a derived table and does not require the extra effort of declaring a Temp Table while providing the same benefits to the user. However; a CTE is more powerful than a derived table as it can also be self-referencing, or even referenced multiple times in the same query. A recursive CTE requires four elements in order to work properly: Anchor query (runs once and the results ‘seed’ the Recursive query) Recursive query (runs multiple times and is the criteria for the remaining results) UNION ALL statement to bind the Anchor and Recursive queries together. INNER JOIN statement to bind the Recursive query to the results of the CTE. [Detailed Blog Post] | [Quiz with Answer] Introduction to SQL Server Security – SQL in Sixty Seconds #011 Let’s get some basic definitions down first. Take the workplace example where “Tom” needs “Read” access to the “Financial Folder”. What are the Securable, Principal, and Permissions from that last sentence? A Securable is a resource that someone might want to access (like the Financial Folder). A Principal is anything that might want to gain access to the securable (like Tom). A Permission is the level of access a principal has to a securable (like Read). [Detailed Blog Post] | [Quiz with Answer] Please leave a comment explain which one was your favorite video as that will help me understand what works and what needs improvement. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology, Video

  Read the article

• What Counts For a DBA: Simplicity

  - by Louis Davidson

  Too many computer processes do an apparently simple task in a bizarrely complex way. They remind me of this strip by one of my favorite artists: Rube Goldberg. In order to keep the boss from knowing one was late, a process is devised whereby the cuckoo clock kisses a live cuckoo bird, who then pulls a string, which triggers a hat flinging, which in turn lands on a rod that removes a typewriter cover…and so on. We rely on creating automated processes to keep on top of tasks. DBAs have a lot of tasks to perform: backups, performance tuning, data movement, system monitoring, and of course, avoiding being noticed.  Every day, there are many steps to perform to maintain the database infrastructure, including: checking physical structures, re-indexing tables where needed, backing up the databases, checking those backups, running the ETL, and preparing the daily reports and yes, all of these processes have to complete before you can call it a day, and probably before many others have started that same day. Some of these tasks are just naturally complicated on their own. Other tasks become complicated because the database architecture is excessively rigid, and we often discover during “production testing” that certain processes need to be changed because the written requirements barely resembled the actual customer requirements.   Then, with no time to change that rigid structure, we are forced to heap layer upon layer of code onto the problematic processes. Instead of a slight table change and a new index, we end up with 4 new ETL processes, 20 temp tables, 30 extra queries, and 1000 lines of SQL code.  Report writers then need to build reports and make magical numbers appear from those toxic data structures that are overly complex and probably filled with inconsistent data. What starts out as a collection of fairly simple tasks turns into a Goldbergian nightmare of daily processes that are likely to cause your dinner to be interrupted by the smartphone doing the vibration dance that signifies trouble at the mill. So what to do? Well, if it is at all possible, simplify the problem by either going into the code and refactoring the complex code to simple, or taking all of the processes and simplifying them into small, independent, easily-tested steps.  The former approach usually requires an agreement on changing underlying structures that requires countless mind-numbing meetings; while the latter can generally be done to any complex process without the same frustration or anger, though it will still leave you with lots of steps to complete, the ability to test each step independently will definitely increase the quality of the overall process (and with each step reporting status back, finding an actual problem within the process will be definitely less unpleasant.) We all know the principle behind simplifying a sequence of processes because we learned it in math classes in our early years of attending school, starting with elementary school. In my 4 years (ok, 9 years) of undergraduate work, I remember pretty much one thing from my many math classes that I apply daily to my career as a data architect, data programmer, and as an occasional indentured DBA: “show your work”. This process of showing your work was my first lesson in simplification. Each step in the process was in fact, far simpler than the entire process.  When you were working an equation that took both sides of 4 sheets of paper, showing your work was important because the teacher could see every step, judge it, and mark it accordingly.  So often I would make an error in the first few lines of a problem which meant that the rest of the work was actually moving me closer to a very wrong answer, no matter how correct the math was in the subsequent steps. Yet, when I got my grade back, I would sometimes be pleasantly surprised. I passed, yet missed every problem on the test. But why? While I got the fact that 1+1=2 wrong in every problem, the teacher could see that I was using the right process. In a computer process, the process is very similar. We take complex processes, show our work by storing intermediate values, and test each step independently. When a process has 100 steps, each step becomes a simple step that is tested and verified, such that there will be 100 places where data is stored, validated, and can be checked off as complete. If you get step 1 of 100 wrong, you can fix it and be confident (that if you did your job of testing the other steps better than the one you had to repair,) that the rest of the process works. If you have 100 steps, and store the state of the process exactly once, the resulting testable chunk of code will be far more complex and finding the error will require checking all 100 steps as one, and usually it would be easier to find a specific needle in a stack of similarly shaped needles.  The goal is to strive for simplicity either in the solution, or at least by simplifying every process down to as many, independent, testable, simple tasks as possible.  For the tasks that really can’t be done completely independently, minimally take those tasks and break them down into simpler steps that can be tested independently.  Like working out division problems longhand, have each step of the larger problem verified and tested.

  Read the article

• Visual Studio Load Testing using Windows Azure

  - by Tarun Arora

  In my opinion the biggest adoption barrier in performance testing on smaller projects is not the tooling but the high infrastructure and administration cost that comes with this phase of testing. Only if a reusable solution was possible and infrastructure management wasn’t as expensive, adoption would certainly spike. It certainly is possible if you bring Visual Studio and Windows Azure into the equation. It is possible to run your test rig in the cloud without getting tangled in SCVMM or Lab Management. All you need is an active Azure subscription, Windows Azure endpoint enabled developer workstation running visual studio ultimate on premise, windows azure endpoint enabled worker roles on azure compute instances set up to run as test controllers and test agents. My test rig is running SQL server 2012 and Visual Studio 2012 RC agents. The beauty is that the solution is reusable, you can open the azure project, change the subscription and certificate, click publish and *BOOM* in less than 15 minutes you could have your own test rig running in the cloud. In this blog post I intend to show you how you can use the power of Windows Azure to effectively abstract the administration cost of infrastructure management and lower the total cost of Load & Performance Testing. As a bonus, I will share a reusable solution that you can use to automate test rig creation for both VS 2010 agents as well as VS 2012 agents. Introduction The slide show below should help you under the high level details of what we are trying to achive... Leveraging Azure for Performance Testing View more PowerPoint from Avanade Scenario 1 – Running a Test Rig in Windows Azure To start off with the basics, in the first scenario I plan to discuss how to, - Automate deployment & configuration of Windows Azure Worker Roles for Test Controller and Test Agent - Automate deployment & configuration of SQL database on Test Controller on the Test Controller Worker Role - Scaling Test Agents on demand - Creating a Web Performance Test and a simple Load Test - Managing Test Controllers right from Visual Studio on Premise Developer Workstation - Viewing results of the Load Test - Cleaning up - Have the above work in the shape of a reusable solution for both VS2010 and VS2012 Test Rig Scenario 2 – The scaled out Test Rig and sharing data using SQL Azure A scaled out version of this implementation would involve running multiple test rigs running in the cloud, in this scenario I will show you how to sync the load test database from these distributed test rigs into one SQL Azure database using Azure sync. The selling point for this scenario is being able to collate the load test efforts from across the organization into one data store. - Deploy multiple test rigs using the reusable solution from scenario 1 - Set up and configure Windows Azure Sync - Test SQL Azure Load Test result database created as a result of Windows Azure Sync - Cleaning up - Have the above work in the shape of a reusable solution for both VS2010 and VS2012 Test Rig The Ingredients Though with an active MSDN ultimate subscription you would already have access to everything and more, you will essentially need the below to try out the scenarios, 1. Windows Azure Subscription 2. Windows Azure Storage – Blob Storage 3. Windows Azure Compute – Worker Role 4. SQL Azure Database 5. SQL Data Sync 6. Windows Azure Connect – End points 7. SQL 2012 Express or SQL 2008 R2 Express 8. Visual Studio All Agents 2012 or Visual Studio All Agents 2010 9. A developer workstation set up with Visual Studio 2012 – Ultimate or Visual Studio 2010 – Ultimate 10. Visual Studio Load Test Unlimited Virtual User Pack. Walkthrough To set up the test rig in the cloud, the test controller, test agent and SQL express installers need to be available when the worker role set up starts, the easiest and most efficient way is to pre upload the required software into Windows Azure Blob storage. SQL express, test controller and test agent expose various switches which we can take advantage of including the quiet install switch. Once all the 3 have been installed the test controller needs to be registered with the test agents and the SQL database needs to be associated to the test controller. By enabling Windows Azure connect on the machines in the cloud and the developer workstation on premise we successfully create a virtual network amongst the machines enabling 2 way communication. All of the above can be done programmatically, let’s see step by step how… Scenario 1 Video Walkthrough–Leveraging Windows Azure for performance Testing Scenario 2 Work in progress, watch this space for more… Solution If you are still reading and are interested in the solution, drop me an email with your windows live id. I’ll add you to my TFS preview project which has a re-usable solution for both VS 2010 and VS 2012 test rigs as well as guidance and demo performance tests.   Conclusion Other posts and resources available here. Possibilities…. Endless!

  Read the article

• Delving into design patterns, and what that means for the Oracle user experience

  - by Kathy.Miedema

  By Kathy Miedema, Oracle Applications User Experience George Hackman, Senior Director, Applications User Experiences The Oracle Applications User Experience team has some exciting things happening around Fusion Applications design patterns. Because we’re hoping to have some new offerings soon (stay tuned with VoX to see what’s in the pipeline around Fusion Applications design patterns), now is a good time to talk more about what design patterns can do for the individual user as well as the entire company. George Hackman, Senior Director of Operations User Experience, says the first thing to note is that user experience is not just about the user interface. It’s about understanding how people do things, observing them, and then finding the patterns that emerge. The Applications UX team develops those patterns and then builds them into Oracle applications. What emerges, Hackman says, is a consistent, efficient user experience that promotes a productive workplace. Creating design patterns What is a design pattern in the context of enterprise software? “Every day, people use technology to get things done,” Hackman says. “They navigate a virtual world that reaches from enterprise to consumer apps, and from desktop to mobile. This virtual world is constantly under construction. New areas are being developed and old areas are being redone. As this world is being built and remodeled, efficient pathways and practices emerge. “Oracle's user experience team watches users navigate this world. We measure their productivity and ask them about their satisfaction. We take the most efficient, most productive pathways from the enterprise and consumer world and turn them into Oracle's user experience patterns.” Hackman describes the process as combining all of the best practices from every part of a user’s world. Members of the user experience team observe, analyze, design, prototype, and measure each work task to find the best possible pattern for a particular work flow. As the team builds the patterns, “we make sure they are fully buildable using Oracle technology,” Hackman said. “So customers know they can use these patterns. There’s no need to make something up from scratch, not knowing whether you can even build it.” Hackman says that creating something on a computer is a good example of a user experience pattern. “People are creating things all the time,” he says. “On the consumer side, they are creating documents. On the enterprise side, they are creating expense reports. On a mobile phone, they are creating contacts. They are using different apps like iPhone or Facebook or Gmail or Oracle software, all doing this creation process.” The Applications UX team starts their process by observing how people might create something. “We observe people creating things. We see the patterns, we analyze and document, then we apply them to our products. It might be different from phone to web browser, but we have these design patterns that create a consistent experience across platforms, and across products, too. The result for customers Oracle constantly improves its part of the virtual world, Hackman said. New products are created and existing products are upgraded. Because Oracle builds user experience design patterns, Oracle's virtual world becomes both more powerful and more familiar at the same time. Because of design patterns, users can navigate with ease as they embrace the latest technology – because it behaves the way they expect it to. This means less training and faster adoption for individual users, and more productivity for the business as a whole. Hackman said Oracle gives customers and partners access to design patterns so that they can build in the virtual world using the same best practices. Customers and partners can extend applications with a user experience that is comfortable and familiar to their users. For businesses that are integrating different Oracle applications, design patterns are key. The user experience created in E-Business Suite should be similar to the user experience in Fusion Applications, Hackman said. If a user is transitioning from one application to the other, it shouldn’t be difficult for them to do their work. With design patterns, it isn’t. “Oracle user experience patterns are the building blocks for the virtual world that ensure productivity, consistency and user satisfaction,” Hackman said. “They are built for the enterprise, but incorporate the best practices from across the virtual world. They empower productivity and facilitate social interaction. When you build with patterns, you get all the end-user benefits of less training / retraining from the finished product. You also get faster / cheaper development.” What’s coming? You can already access design patterns to help you build Dashboards with OBIEE here. And we promised you at the beginning that we had something in the pipeline on Fusion Applications design patterns. Look for the announcement about when they are available here on VoX.

  Read the article

• Is this proper OO design for C++?

  - by user121917

  I recently took a software processes course and this is my first time attempting OO design on my own. I am trying to follow OO design principles and C++ conventions. I attempted and gave up on MVC for this application, but I am trying to "decouple" my classes such that they can be easily unit-tested and so that I can easily change the GUI library used and/or the target OS. At this time, I have finished designing classes but have not yet started implementing methods. The function of the software is to log all packets sent and received, and display them on the screen (like WireShark, but for one local process only). The software accomplishes this by hooking the send() and recv() functions in winsock32.dll, or some other pair of analogous functions depending on what the intended Target is. The hooks add packets to SendPacketList/RecvPacketList. The GuiLogic class starts a thread which checks for new packets. When new packets are found, it utilizes the PacketFilter class to determine the formatting for the new packet, and then sends it to MainWindow, a native win32 window (with intent to later port to Qt).1 Full size image of UML class diagram Here are my classes in skeleton/header form (this is my actual code): class PacketModel { protected: std::vector<byte> data; int id; public: PacketModel(); PacketModel(byte* data, unsigned int size); PacketModel(int id, byte* data, unsigned int size); int GetLen(); bool IsValid(); //len >= sizeof(opcode_t) opcode_t GetOpcode(); byte* GetData(); //returns &(data[0]) bool GetData(byte* outdata, int maxlen); void SetData(byte* pdata, int len); int GetId(); void SetId(int id); bool ParseData(char* instr); bool StringRepr(char* outstr); byte& operator[] (const int index); }; class SendPacket : public PacketModel { protected: byte* returnAddy; public: byte* GetReturnAddy(); void SetReturnAddy(byte* addy); }; class RecvPacket : public PacketModel { protected: byte* callAddy; public: byte* GetCallAddy(); void SetCallAddy(byte* addy); }; //problem: packets may be added to list at any time by any number of threads //solution: critical section associated with each packet list class Synch { public: void Enter(); void Leave(); }; template<class PacketType> class PacketList { private: static const int MAX_STORED_PACKETS = 1000; public: static const int DEFAULT_SHOWN_PACKETS = 100; private: vector<PacketType> list; Synch synch; //wrapper for critical section public: void AddPacket(PacketType* packet); PacketType* GetPacket(int id); int TotalPackets(); }; class SendPacketList : PacketList<SendPacket> { }; class RecvPacketList : PacketList<RecvPacket> { }; class Target //one socket { bool Send(SendPacket* packet); bool Inject(RecvPacket* packet); bool InitSendHook(SendPacketList* sendList); bool InitRecvHook(RecvPacketList* recvList); }; class FilterModel { private: opcode_t opcode; int colorID; bool bFilter; char name[41]; }; class FilterFile { private: FilterModel filter; public: void Save(); void Load(); FilterModel* GetFilter(opcode_t opcode); }; class PacketFilter { private: FilterFile filters; public: bool IsFiltered(opcode_t opcode); bool GetName(opcode_t opcode, char* namestr); //return false if name does not exist COLORREF GetColor(opcode_t opcode); //return default color if no custom color }; class GuiLogic { private: SendPacketList sendList; RecvPacketList recvList; PacketFilter packetFilter; void GetPacketRepr(PacketModel* packet); void ReadNew(); void AddToWindow(); public: void Refresh(); //called from thread void GetPacketInfo(int id); //called from MainWindow }; I'm looking for a general review of my OO design, use of UML, and use of C++ features. I especially just want to know if I'm doing anything considerably wrong. From what I've read, design review is on-topic for this site (and off-topic for the Code Review site). Any sort of feedback is greatly appreciated. Thanks for reading this.

  Read the article

• Why is my Ubuntu system not using the correct kernel?

  - by Brooks Moses

  We're having a bit of confusion on a Ubuntu remote system -- /boot/grub/menu.lst suggests the system should boot into kernel 2.6.35-30-generic, but it is actually running kernel 2.6.32-27-generic. Where should I look to start figuring out why this is happening and how to fix it? Specifically, /boot/grub/menu.lst has default 0 and the first entry is title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2- ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic Further, I've confirmed that /boot/vmlinuz-2.6.35-30-generic and /boot/initrd.img-2.6.35-30-generic exist and have appropriate permissions. Meanwhile, uname -a returns: $ uname -a Linux cuda2 2.6.32-27-generic #49-Ubuntu SMP Thu Dec 2 00:51:09 UTC 2010 x86_64 GNU/Linux Edit: I've also tried re-running update-grub, and rebooting; no luck. Here's the full menu.lst, as requested by a commenter: # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-legacy-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro ## default grub root device ## e.g. groot=(hd0,0) # groot=67717ee3-cbf9-45d2-ae97-820256f4c4fd ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.35-30-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.32-32-server uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-32-server (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-27-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-27-generic title Ubuntu 10.10, kernel 2.6.32-27-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-27-generic title Chainload into GRUB 2 root 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/grub/core.img title Ubuntu 10.10, memtest86+ uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST To add complication and joy to my life, this is a desktop machine in a remote datacenter; we don't have either local access or serial-console access. Suggestions?

  Read the article

• Package Manager Console For More Than Managing Packages

  - by Steve Michelotti

  Like most developers, I prefer to not have to pick up the mouse if I don’t have to. I use the Executor launcher for almost everything so it’s extremely rare for me to ever click the “Start” button in Windows. I also use shortcuts keys when I can so I don’t have to pick up the mouse. By now most people know that the Package Manager Console that comes with NuGet is PowerShell embedded inside of Visual Studio. It is based on its PowerConsole predecessor which was the first (that I’m aware of) to embed PowerShell inside of Visual Studio and give access to the Visual Studio automation DTE object. It does this through an inherent $dte variable that is automatically available and ready for use. This variable is also available inside of the NuGet Package Manager console. Adding a new class file to a Visual Studio project is one of those mundane tasks that should be easier. First I have to pick up the mouse. Then I have to right-click where I want it file to go and select “Add –> New Item…” or “Add –> Class…”   If you know the Ctrl+Shift+A shortcut, then you can avoid the mouse for adding a new item but you have to manually assign a shortcut for adding a new class. At this point it pops up a dialog just so I can enter the name of the class I want. Since this is one of the most common tasks developers do, I figure there has to be an easier way and a way that avoids picking up the mouse and popping up dialogs. This is where your embedded PowerShell prompt in Visual Studio comes in. The first thing you should do is to assign a keyboard shortcut so that you can get a PowerShell prompt (i.e., the Package Manager console) quickly without ever picking up the mouse. I assign “Ctrl+P, Ctrl+M” because “P + M” stands for “Package Manager” so it is easy to remember:   At this point I can type this command to add a new class: PM> $dte.ItemOperations.AddNewItem("Code\Class", "Foo.cs") which will result in the class being added: At this point I’ve satisfied my original goal of not having to pick up a mouse and not having the “Add New Item” dialog pop up. However, having to remember that $dte method call is not very user-friendly at all. The best thing to do is to make this a re-usable function that always loads when Visual Studio starts up. There is a $profile variable that you can use to figure out where that location is for your machine: PM> $profile C:\Users\steve.michelotti\Documents\WindowsPowerShell\NuGet_profile.ps1 If the NuGet_profile.ps1 file does not already exist, you can just create it yourself and place it in the directory. Now you can put a function inside like this: 1: function addClass($className) 2: { 3: if ($className.EndsWith(".cs") -eq $false) { 4: $className = $className + ".cs" 5: } 6: 7: $dte.ItemOperations.AddNewItem("Code\Class", $className) 8: } Since it’s in the NuGet_profile.ps1 file, this function will automatically always be available for me after starting Visual Studio. Now I can simply do this: PM> addClass Foo At this point, we have a *very* nice developer experience. All I did to add a new class was: “Ctrl-P, Ctrl-M”, then “addClass Foo”. No mouse, no pop up dialogs, no complex commands to remember. In fact, PowerShell gives you auto-completion as well. If I type “addc” followed by [TAB], then intellisense pops up: You can see my custom function appear in intellisense above. Now I can type the next letter “c” and [TAB] to auto-complete the command. And if that’s still too many key strokes for you, then you can create your own PowerShell custom alias for your function like this: PM> Set-Alias addc addClass PM> addc Foo While all this is very useful, I did run into some issues which prompted me to make even further customization. This command will add the new class file to the current active directory. Depending on your context, this may not be what you want. For example, by convention all view model objects go in the “Models” folder in an MVC project. So if the current document is in the Controllers folder, it will add your class to that folder which is not what you want. You want it to always add it to the “Models” folder if you are adding a new model in an MVC project. For this situation, I added a new function called “addModel” which looks like this: 1: function addModel($className) 2: { 3: if ($className.EndsWith(".cs") -eq $false) { 4: $className = $className + ".cs" 5: } 6: 7: $modelsDir = $dte.ActiveSolutionProjects[0].UniqueName.Replace(".csproj", "") + "\Models" 8: $dte.Windows.Item([EnvDTE.Constants]::vsWindowKindSolutionExplorer).Activate() 9: $dte.ActiveWindow.Object.GetItem($modelsDir).Select([EnvDTE.vsUISelectionType]::vsUISelectionTypeSelect) 10: $dte.ItemOperations.AddNewItem("Code\Class", $className) 11: } First I figure out the path to the Models directory on line #7. Then I activate the Solution Explorer window on line #8. Then I make sure the Models directory is selected so that my context is correct when I add the new class and it will be added to the Models directory as desired. These are just a couple of examples for things you can do with the PowerShell prompt that you have available in the Package Manager console. As developers we spend so much time in Visual Studio, why would you not customize it so that you can work in whatever way you want to work?! The next time you’re not happy about the way Visual Studio makes you do a particular task – automate it! The sky is the limit.

  Read the article

• User-Defined Customer Events & their impact (FA Type Profile)

  - by Rajesh Sharma

  CC&B automatically creates field activities when a specific Customer Event takes place. This depends on the way you have setup your Field Activity Type Profiles, the templates within, and associated SP Condition(s) on the template. CC&B uses the service point type, its state and referenced customer event to determine which field activity type to generate.   Customer events available in the base product include: Cut for Non-payment (CNP) Disconnect Warning (DIWA) Reconnect for Payment (REPY) Reread (RERD) Stop Service (STOP) Start Service (STRT) Start/Stop (STSP)   Note the Field values/codes defined for each event.   CC&B comes with a flexibility to define new set of customer events. These can be defined in the Look Up - CUST_EVT_FLG. Values from the Look Up are used on the Field Activity Type Profile Template page.     So what's the use of having user-defined Customer Events? And how will the system detect such events in order to create field activity(s)?   Well, system can only detect such events when you reference a user-defined customer event on a Severance Event Type for an event type Create Field Activities.     This way you can create additional field activities of a specific field activity type for user-defined customer events.   One of our customers adopted this feature and created a user-defined customer event CNPW - Cut for Non-payment for Water Services. This event was then linked on a Field Activity Type Profile and referenced on a Severance Event - CUT FOR NON PAY-W. The associated Severance Process was configured to trigger a reconnection process if it was cancelled (done by defining a Post Cancel Algorithm). Whenever this Severance Event was executed, a specific type of Field Activity was generated for disconnection purposes. The Field Activity type was determined by the system from the Field Activity Type Profile referenced for the SP Type, SP's state and the referenced user-defined customer event. All was working well until the time when they realized that in spite of the Severance Process getting cancelled (when a payment was made); the Post Cancel Algorithm was not executed to start a Reconnection Severance Process for the purpose of generating a reconnection field activity and reconnecting the service.   Basically, the Post Cancel algorithm (if specified on a Severance Process Template) is triggered when a Severance Process gets cancelled because a credit transaction has affected/relieved a Service Agreement's debt.   So what exactly was happening? Now we come to actual question as to what is the impact in having a user-defined customer event.   System defined/base customer events are hard-coded across the entire system. There is an impact even if you remove any customer event entry from the Look Up. User-defined customer events are not recognized by the system anywhere else except in the severance process, as described above.   There are few programs which have routines to first validate the completion of disconnection field activities, which were raised as a result of customer event CNP - Cut for Non-payment in order to perform other associated actions. One such program is the Post Cancel Algorithm, referenced on a Severance Process Template, generally used to reconnect services which were disconnected from other Severance Event, specifically CNP - Cut for Non-Payment. Post cancel algorithm provided by the product - SEV POST CAN does the following (below is the algorithm's description):   This algorithm is called after a severance process has been cancelled (typically because the debt was paid and the SA is no longer eligible to be on the severance process). It checks to see if the process has a completed 'disconnect' event and, if so, starts a reconnect process using the Reconnect Severance Process Template defined in the parameter.    Notice the underlined text. This algorithm implicitly checks for Field Activities having completed status, which were generated from Severance Events as a result of CNP - Cut for Non-payment customer event.   Now if we look back to the customer's issue, we can relate that the Post Cancel algorithm was triggered, but was not able to find any 'Completed' CNP - Cut for Non-payment related field activity. And hence was not able to start a reconnection severance process. This was because a field activity was generated and completed for a customer event CNPW - Cut for Non-payment of Water Services instead.   To conclude, if you introduce new customer events that extend or simulate base customer events, the ones that are included in the base product, ensure that there is no other impact either direct or indirect to other business functions that the application has to offer.  

  Read the article

• Running a Mongo Replica Set on Azure VM Roles

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/15/running-a-mongo-replica-set-on-azure-vm-roles.aspxSetting up a MongoDB Replica Set with a bunch of Azure VMs is straightforward stuff. Here’s a step-by-step which gets you from 0 to fully-redundant 3-node document database in about 30 minutes (most of which will be spent waiting for VMs to fire up). First, create yourself 3 VM roles, which is the minimum number of nodes you need for high availability. You can use any OS that Mongo supports. This guide uses Windows but the only difference will be the mechanism for starting the Mongo service when the VM starts (Windows Service, daemon etc.) While the VMs are provisioning, download and install Mongo locally, so you can set up the replica set with the Mongo shell. We’ll create our replica set from scratch, doing one machine at a time (if you have a single node you want to upgrade to a replica set, it’s the same from step 3 onwards): 1. Setup Mongo Log into the first node, download mongo and unzip it to C:. Rename the folder to remove the version – so you have c:\MongoDB\bin etc. – and create a new folder for the logs, c:\MongoDB\logs. 2. Setup your data disk When you initialize a node in a replica set, Mongo pre-allocates a whole chunk of storage to use for data replication. It will use up to 5% of your data disk, so if you use a Windows VM image with a defsault 120Gb disk and host your data on C:, then Mongo will allocate 6Gb for replication. And that takes a while. Instead you can create yourself a new partition by shrinking down the C: drive in Computer Management, by say 10Gb, and then creating a new logical disk for your data from that spare 10Gb, which will be allocated as E:. Create a new folder, e:\data. 3. Start Mongo When that’s done, start a command line, point to the mongo binaries folder, install Mongo as a Windows Service, running in replica set mode, and start the service: cd c:\mongodb\bin mongod -logpath c:\mongodb\logs\mongod.log -dbpath e:\data -replSet TheReplicaSet –install net start mongodb 4. Open the ports Mongo uses port 27017 by default, so you need to allow access in the machine and in Azure. In the VM, open Windows Firewall and create a new inbound rule to allow access via port 27017. Then in the Azure Management Console for the VM role, under the Configure tab add a new rule, again to allow port 27017. 5. Initialise the replica set Start up your local mongo shell, connecting to your Azure VM, and initiate the replica set: c:\mongodb\bin\mongo sc-xyz-db1.cloudapp.net rs.initiate() This is the bit where the new node (at this point the only node) allocates its replication files, so if your data disk is large, this can take a long time (if you’re using the default C: drive with 120Gb, it may take so long that rs.initiate() never responds. If you’re sat waiting more than 20 minutes, start another instance of the mongo shell pointing to the same machine to check on it). Run rs.conf() and you should see one node configured. 6. Fix the host name for the primary – *don’t miss this one* For the first node in the replica set, Mongo on Windows doesn’t populate the full machine name. Run rs.conf() and the name of the primary is sc-xyz-db1, which isn’t accessible to the outside world. The replica set configuration needs the full DNS name of every node, so you need to manually rename it in your shell, which you can do like this: cfg = rs.conf() cfg.members[0].host = ‘sc-xyz-db1.cloudapp.net:27017’ rs.reconfig(cfg) When that returns, rs.conf() will have your full DNS name for the primary, and the other nodes will be able to connect. At this point you have a working database, so you can start adding documents, but there’s no replication yet. 7. Add more nodes For the next two VMs, follow steps 1 through to 4, which will give you a working Mongo database on each node, which you can add to the replica set from the shell with rs.add(), using the full DNS name of the new node and the port you’re using: rs.add(‘sc-xyz-db2.cloudapp.net:27017’) Run rs.status() and you’ll see your new node in STARTUP2 state, which means its initializing and replicating from the PRIMARY. Repeat for your third node: rs.add(‘sc-xyz-db3.cloudapp.net:27017’) When all nodes are finished initializing, you will have a PRIMARY and two SECONDARY nodes showing in rs.status(). Now you have high availability, so you can happily stop db1, and one of the other nodes will become the PRIMARY with no loss of data or service. Note – the process for AWS EC2 is exactly the same, but with one important difference. On the Azure Windows Server 2012 base image, the MongoDB release for 64-bit 2008R2+ works fine, but on the base 2012 AMI that release keeps failing with a UAC permission error. The standard 64-bit release is fine, but it lacks some optimizations that are in the 2008R2+ version.

  Read the article

• Adventures in Scrum: Lesson 1 &ndash; The failed Sprint

  - by Martin Hinshelwood

  I recently had a conversation with a product owner that wanted to have the Scrum team broken up into smaller units so that less time was wasted on the Scrum Ceremonies! Their complaint was around the need in Scrum to have the entire “Team” (7+-2) involved in the sizing of the work during the “Sprint Planning Meeting”.  The standard flippant answer of all Scrum professionals, “Well that's not Scrum”, does not get you any brownie points in these situations. The response could be “Well we are not doing Scrum then” which in turn leads to “We are doing Scrum…But, we have split the scrum team into units of 2/3 so that they can concentrate on a specific area of work”. While this may work, it is not Scrum and should not be called so… It is just a form of Agile. Don’t get me wrong at this stage, there is nothing wrong with Agile, just don’t call it Scrum. The reason that the Product Owner wants to do this is that, in effect, through a number of miscommunications and failings in our implementation of Scrum, there was NO unit of potentially Shippable software at the end of the first sprint. It does not matter to them that most Scrum teams will fail the first Sprint, even those that are high performing teams. Remember it is the product owners their money! We should NOT break up scrum teams into smaller units for the purpose of having less people tied up in the Scrum Ceremonies. The amount of backlog the Team selects is solely up to the Team… Only the Team can assess what it can accomplish over the upcoming Sprint. - Scrum Guide, Scrum.org The entire team must accept the work and in order to understand what they can accept they must be free to size it as a team. This both encourages common understanding and increases visibility on why team members think a task is of a particular size. This has the benefit of increasing the knowledge of the entire team in the problem domain. A new Team often first realizes that it will either sink or swim as a Team, not individually, in this meeting. The Team realizes that it must rely on itself. As it realizes this, it starts to self-organize to take on the characteristics and behaviour of a real Team. - Scrum Guide, Scrum.org This paragraph goes to the why of having the whole team at the meeting; The goal of Scrum it to produce a unit of potentially shippable software at the end of every Sprint. In order to achieve this we need high performing teams and this is what Scrum as a framework has been optimised to produce. I think that our Product Owner is understandably upset over loosing two weeks work and is losing sight the end goal of Scrum in the failures of the moment. As the man spending the money, I completely understand his perspective and I think that we should not have started Scrum on an internal project, but selected a customer  that is open to the ideas and complications of Scrum. So, what should we have NOT done on our first Scrum project: Should not have had 3 interns as the only on site resource – This lead to bad practices as the experienced guys were not there helping and correcting as they usually would. Should not have had the only experienced guys offsite – With both the experienced technical guys in completely different time zones it was difficult to get time for questions. Helping the guys on site was just plain impossible. Should not have used a part time ScrumMaster – Although the ScrumMaster attended all of the Ceremonies, because they are only in 2 full days of the week it makes it difficult for the team to raise impediments as they go. Should not have used a proxy product owner. – This was probably the worst decision that was made. Mainly because the proxy product owner did not have the same vision as the product owner. While Scrum does not explicitly reject the idea of a Proxy Product Owner, I do not think it works very well in practice. The “single wringable neck” needs to contain both the Money and the Vision as well as attending the required meetings. I will be brining all of these things up at the Sprint Retrospective and we will learn from our mistakes and move on. Do, Inspect then Adapt…   Technorati Tags: Scrum,Sprint Planing,Sprint Retrospective,Scrum.org,Scrum Guide,Scrum Ceremonies,Scrummaster,Product Owner Need Help? Professional Scrum Developer Training SSW has six Professional Scrum Developer Trainers who specialise in training your developers in implementing Scrum with Microsoft's Visual Studio ALM tools.

  Read the article

• Enable DreamScene in Any Version of Vista or Windows 7

  - by DigitalGeekery

  Windows DreamScene was a utility available for Vista Ultimate that allowed users to set video as desktop wallpaper. It was dropped in Windows 7, but we’ll take a look at how to play DreamScenes in all versions of Windows 7 or Vista. Downloading DreamScenes First, you’ll need to find some DreamScenes to download. We’ve found some nice ones at both DreamScene.org and DeviantArt. You can find those download links at the end of the article. They’ll come as compressed files, so you’ll need to extract them after downloading. Windows 7 DreamScene Activator If you are running Windows 7 you can use Windows 7 DreamScene Activator. This free portable utility enables DreamScene in both 32 & 64 bit versions of Windows 7. Users can then set either MPG or WMV files as desktop wallpaper. Download and extract the Windows 7 DreamScene Activator (link below). Once extracted, you’ll need to run the application as administrator. Right-click on the .exe and select Run as administrator. Click on Enable DreamScene. This will also restart Windows Explorer if it is open. To play your DreamScene, browse for the file in Windows Explorer, right-click the file and select Set as Desktop Background. Enjoy your new Windows 7 DreamScene.   Although it says it is for Windows 7 only, we were able to get it to work with no problems on Vista Home Premium x32 as well.   You can Pause the DreamScene at anytime by right-clicking on the desktop and selecting Pause DreamScene.   When you are ready for a change, click Disable DreamScene and switch back to your previous wallpaper. Using VLC Media Player Users of all versions of Windows 7 & Vista can enable a DreamScene using VLC. Recently, we showed you how to set a video as your desktop wallpaper in VLC.  Since DreamScenes are in MPEG or WMV format, we will use the same tactic to display them as desktop wallpaper. We’ll just need to make a few additional tweaks to the VLC settings. You’ll need to download and install VLC media player if you don’t already have it. You can find the download link below. Next, select Tools > Preferences from the Menu. Select the Video button on the left and then choose DirectX video output from the Output dropdown list. Next, select All under Show Settings at the lower left, then select the Video button on the left pane. Uncheck Show media title on video. This will prevent VLC from constantly showing the title of the video on the screen each time the video loops. Click Save and the restart VLC.   Now we will add the video to our playlist and set it to continuously loop. Select View > Playlist from the Menu. Select the Add file button from the bottom of the Playlist window and select Add file.   Browse for your file and click Open.   Click the Loop button at the bottom so the video plays in a continuous loop.   Now, we’re ready to play the video. After the video starts playing, select Video > DirectX Wallpaper from the Menu, then minimize VLC.   If you’re using Aero Themes, you may get a pop-up warning and Windows will switch automatically to a basic theme.   If looping one video gets to be a little repetitive, you can add multiple videos to your playlist in VLC and loop the entire playlist. Just make sure you toggle the Loop button on the playlist window to Loop All. Now you’ve got a nice DreamScene playing on your desktop. Another cool trick you can do with VLC is take snapshots of favorite movie scenes and set them as backgrounds. When you’re ready to go back to your old wallpaper, maximize VLC, select Video and click DirectX Wallpaper again to turn it off the video background. Occasionally we were left with a black screen and had to manually change our wallpaper back to normal even after turning off the DirectX Wallpaper. Note: Keep in mind that using the VLC method takes up a lot of resources so if you try to run it on older hardware, or say a netbook, you’re not going to get good results. We also tried to use the VLC method in XP, but couldn’t get it to work. If you have leave a comment and let us know. While the DreamScene feature never really caught on in Vista, we find them to be a cool way to pump a little life into your desktop on any version of Vista or Windows 7. Downloads DreamScenes from Dreamscene.org DreamScenes from DeviantArt Download VLC media player Windows 7 DreamScene Activator Similar Articles Productive Geek Tips Wait, How do I Turn on DreamScene Again?Enable Run Command on Windows 7 or Vista Start MenuEnable or Disable UAC From the Windows 7 / Vista Command LineUnderstanding Windows Vista Aero Glass RequirementsEnable Mapping to \HostnameC$ Share on Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >