Search Results

Search found 5262 results on 211 pages for 'commands'.

Page 198/211 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• I need help converting a C# string from one character encoding to another?

  - by Handleman

  According to Spolsky I can't call myself a developer, so there is a lot of shame behind this question... Scenario: From a C# application, I would like to take a string value from a SQL db and use it as the name of a directory. I have a secure (SSL) FTP server on which I want to set the current directory using the string value from the DB. Problem: Everything is working fine until I hit a string value with a "special" character - I seem unable to encode the directory name correctly to satisfy the FTP server. The code example below uses "special" character é as an example uses WinSCP as an external application for the ftps comms does not show all the code required to setup the Process "_winscp". sends commands to the WinSCP exe by writing to the process standardinput for simplicity, does not get the info from the DB, but instead simply declares a string (but I did do a .Equals to confirm that the value from the DB is the same as the declared string) makes three attempts to set the current directory on the FTP server using different string encodings - all of which fail makes an attempt to set the directory using a string that was created from a hand-crafted byte array - which works Process _winscp = new Process(); byte[] buffer; string nameFromString = "Sinéad O'Connor"; _winscp.StandardInput.WriteLine("cd \"" + nameFromString + "\""); buffer = Encoding.UTF8.GetBytes(nameFromString); _winscp.StandardInput.WriteLine("cd \"" + Encoding.UTF8.GetString(buffer) + "\""); buffer = Encoding.ASCII.GetBytes(nameFromString); _winscp.StandardInput.WriteLine("cd \"" + Encoding.ASCII.GetString(buffer) + "\""); byte[] nameFromBytes = new byte[] { 83, 105, 110, 130, 97, 100, 32, 79, 39, 67, 111, 110, 110, 111, 114 }; _winscp.StandardInput.WriteLine("cd \"" + Encoding.Default.GetString(nameFromBytes) + "\""); The UTF8 encoding changes é to 101 (decimal) but the FTP server doesn't like it. The ASCII encoding changes é to 63 (decimal) but the FTP server doesn't like it. When I represent é as value 130 (decimal) the FTP server is happy, except I can't find a method that will do this for me (I had to manually contruct the string from explicit bytes). Anyone know what I should do to my string to encode the é as 130 and make the FTP server happy and finally elevate me to level 1 developer by explaining the only single thing a developer should understand?

  Read the article

• Dynamically loaded jQuery with GreaseMonkey inconsistent on pages (refreshing seems to fix it)... do

  - by uprightnetizen

  Hi, I want a custom page analysis footer on every site I visit... so I've used a method to attach JQuery to unsafeWindow. I then create a floating footer on the page. I want to be able to call commands in a menu, do some processing, then put the results in the footer. Unfortunately it sometimes works, sometimes it doesn't. At least two alerts should happen in the printOutput function. Sometimes it only fires one, then it (crashes?) without error? On other pages, both alerts fire and it finds the element, but it doesn't add the extra text. (e.g. www.linode.com) Refreshing the page, then running the printOutput command again seems to always work. Does anyone know what's going on??? The userscript can be installed at: http://www.captionwizard.com/test/page_analysis.user.js // ==UserScript== // @name page_analysis // @namespace markspace // @description Page Analysis // @include http://*/* // ==/UserScript== (function() { // Add jQuery var GM_JQ = document.createElement('script'); GM_JQ.src = 'http://code.jquery.com/jquery-1.4.2.min.js'; GM_JQ.type = 'text/javascript'; document.getElementsByTagName('head')[0].appendChild(GM_JQ); var jqueryActive = false; //Check if jQuery's loaded function GM_wait() { if(typeof unsafeWindow.jQuery == 'undefined') { window.setTimeout(GM_wait,100); } else { $ = unsafeWindow.jQuery; letsJQuery(); } } GM_wait(); function letsJQuery() { jqueryActive = true; setupOutputFooter(); } /******************************* Analysis FOOTER Functions ******************************/ function printOutput(someText) { alert('printing output'); if($('div.analysis_footer').length) { alert('is here - appending'); $('div.analysis_footer').append('<br>' + someText); } else { alert('not here - trying again'); setupOutputFooter(); $('div.analysis_footer').append('<br>' + someText); } } GM_registerMenuCommand("Test Output", testOutput, "k", "control", "k" ); function testOutput() { printOutput('testing this'); } function setupOutputFooter() { $('<div class="analysis_footer">Page Analysis Footer:</div>').appendTo('body'); $('div.analysis_footer').css('position','fixed').css('bottom', '0px').css('background-color','#F8F8F8'); $('div.analysis_footer').css('width','100%').css('color','#3B3B3B').css('font-size', '0.8em'); $('div.analysis_footer').css('font-family', '"Myriad",Verdana,Arial,Helvetica,sans-serif').css('padding', '5px'); $('div.analysis_footer').css('border-top', '1px solid black').css('text-align', 'left'); } }());

  Read the article

• Fast response on first Socket I/O request but slow every other time when communicating with remote serial port

  - by GreenGodot

  I'm using sockets to pass Serial commands to a remote device. And the response to that request is sent back and printed out. However, I am having a problem in that the first time it is instant but the rest of the time it can take up to 20 seconds to receive a reply. I think the problem is with my attempt at threading but I am not entirely sure. new Thread() { @Override public void run() { System.out.println("opened"); try { isSocketRetrieving.setText("Opening Socket"); socket = new Socket(getAddress(), getRemotePort())); DataOutput = new DataOutputStream(socket .getOutputStream()); inFromServer = new BufferedReader( new InputStreamReader(socket .getInputStream())); String line = ""; isSocketRetrieving.setText("Reading Stream......"); while ((line = inFromServer.readLine()) != null) { System.out.println(line); if (line.contains(getHandshakeRequest())) { DataOutput.write((getHandshakeResponse()toString() + "\r").getBytes()); DataOutput.flush(); DataOutput .write((getCommand().toString() + "\r").getBytes()); DataOutput.flush(); int pause = (line.length()*8*1000)/getBaud(); sleep(pause); } else if (line.contains(readingObject .getExpected())) { System.out.println(line); textArea.append("value = " + line + "\n"); textAreaScroll.revalidate(); System.out.println("Got Value"); break; } } System.out.println("Ended"); try { inFromServer.close(); DataOutput.close(); socket.close(); isSocketRetrieving.setText("Socket is inactive..."); rs232Table.addMouseListener(listener); interrupt(); join(); } catch (IOException e) { e.printStackTrace(); } catch (InterruptedException e) { System.out.println("Thread exited"); } } catch (NumberFormatException e1) { e1.printStackTrace(); } catch (UnknownHostException e1) { e1.printStackTrace(); } catch (IOException e1) { e1.printStackTrace(); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } } }.start();

  Read the article

• Incompatible library creating new project with Aptana

  - by Phil Rice

  I am a ruby and rails newbie, so my abilities to debug this are somewhat limited. I have just added the eclipse plugin which failed, then downloaded the latest aptana studio which also failed. The failure was the same in both cases. The nature of the failure is that when I create a new rails project, I get an error message about an incompatible library version "C:/Ruby193/lib/ruby/gems/1.9.1/gems/mongrel-1.1.5-x86-mswin32-60/lib/http11.so". The project is actually created, along with directories and files. Google searches around this error message have only returned a couple of hits, which were not very helpful I am wondering if this is about 64 bit libraries. My software stack is: Windows 7 home premium 64bit Aptana RadRails, build: 2.0.5.1278709071 Ruby1.9.3 gem 1.8.24 The console shows: "4320" C:/Ruby193/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require': iconv will be deprecated in the future, use String#encode instead. C:/Ruby193/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require': incompatible library version - C:/Ruby193/lib/ruby/gems/1.9.1/gems/mongrel-1.1.5-x86-mswin32-60/lib/http11.so (LoadError) from C:/Ruby193/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:156:in `block in require' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:521:in `new_constants_in' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:156:in `require' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/mongrel-1.1.5-x86-mswin32-60/lib/mongrel.rb:12:in `<top (required)>' from C:/Ruby193/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:60:in `require' from C:/Ruby193/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:60:in `rescue in require' from C:/Ruby193/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:35:in `require' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:156:in `block in require' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:521:in `new_constants_in' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:156:in `require' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/rack-1.0.0/lib/rack/handler/mongrel.rb:1:in `<top (required)>' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/rack-1.0.0/lib/rack/handler.rb:17:in `const_get' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/rack-1.0.0/lib/rack/handler.rb:17:in `block in get' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/rack-1.0.0/lib/rack/handler.rb:17:in `each' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/rack-1.0.0/lib/rack/handler.rb:17:in `get' from C:/Ruby193/lib/ruby/gems/1.9.1/gems/rails-2.3.4/lib/commands/server.rb:45:in `<top (required)>' from C:/Ruby193/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require' from C:/Ruby193/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require' from script/server:3:in `<top (required)>' from -e:2:in `load' from -e:2:in `<main>'

  Read the article

• Why do I get a WCF timeout even though my service call and callback are successful?

  - by KallDrexx

  I'm playing around with hooking up an in-game console to a WCF interface, so an external application can send console commands and receive console output. To accomplish this I created the following service contracts: public interface IConsoleNetworkCallbacks { [OperationContract(IsOneWay = true)] void NewOutput(IEnumerable<string> text, string category); } [ServiceContract(SessionMode = SessionMode.Required, CallbackContract = typeof(IConsoleNetworkCallbacks))] public interface IConsoleInterface { [OperationContract] void ProcessInput(string input); [OperationContract] void ChangeCategory(string category); } On the server I implemented it with: public class ConsoleNetworkInterface : IConsoleInterface, IDisposable { public ConsoleNetworkInterface() { ConsoleManager.Instance.RegisterOutputUpdateHandler(OutputHandler); } public void Dispose() { ConsoleManager.Instance.UnregisterOutputHandler(OutputHandler); } public void ProcessInput(string input) { ConsoleManager.Instance.ProcessInput(input); } public void ChangeCategory(string category) { ConsoleManager.Instance.UnregisterOutputHandler(OutputHandler); ConsoleManager.Instance.RegisterOutputUpdateHandler(OutputHandler, category); } protected void OutputHandler(IEnumerable<string> text, string category) { var callbacks = OperationContext.Current.GetCallbackChannel<IConsoleNetworkCallbacks>(); callbacks.NewOutput(text, category); } } On the client I implemented the callback with: public class Callbacks : IConsoleNetworkCallbacks { public void NewOutput(IEnumerable<string> text, string category) { MessageBox.Show(string.Format("{0} lines received for '{1}' category", text.Count(), category)); } } Finally, I establish the service host with the following class: public class ConsoleServiceHost : IDisposable { protected ServiceHost _host; public ConsoleServiceHost() { _host = new ServiceHost(typeof(ConsoleNetworkInterface), new Uri[] { new Uri("net.pipe://localhost") }); _host.AddServiceEndpoint(typeof(IConsoleInterface), new NetNamedPipeBinding(), "FrbConsolePipe"); _host.Open(); } public void Dispose() { _host.Close(); } } and use the following code on my client to establish the connection: protected Callbacks _callbacks; protected IConsoleInterface _proxy; protected void ConnectToConsoleServer() { _callbacks = new Callbacks(); var factory = new DuplexChannelFactory<IConsoleInterface>(_callbacks, new NetNamedPipeBinding(), new EndpointAddress("net.pipe://localhost/FrbConsolePipe")); _proxy = factory.CreateChannel(); _proxy.ProcessInput("Connected"); } So what happens is that my ConnectToConsoleServer() is called and then it gets all the way to _proxy.ProcessInput("Connected");. In my game (on the server) I immediately see the output caused by the ProcessInput call, but the client is still stalled on the _proxy.ProcessInput() call. After a minute my client gets a JIT TimeoutException however at the same time my MessageBox message appears. So obviously not only is my command being sent immediately, my callback is being correctly called. So why am I getting a timeout exception? Note: Even removing the MessageBox call, I still have this issue, so it's not an issue of the GUI blocking the callback response.

  Read the article

• Device drivers and Windows

  - by b-gen-jack-o-neill

  Hi, I am trying to complete the picture of how the PC and the OS interacts together. And I am at point, where I am little out of guess when it comes to device drivers. Please, don´t write things like its too complicated, or you don´t need to know when using high programming laguage and winapi functions. I want to know, it´s for study purposes. So, the very basic structure of how OS and PC (by PC I mean of course HW) is how I see it is that all other than direct CPU commands, which can CPU do on itself (arithmetic operation, its registers access and memory access) must pass thru OS. Mainly becouse from ring level 3 you cannot use in and out intructions which are used for acesing other HW. I know that there is MMIO,but it must be set by port comunication first. It was not like this all the time. Even I am bit young to remember MSDOS, I know you could access HW directly, becouse there ws no limitation, no ring mode. So you could to write string to diplay use wheather DOS function, or directly acess video card memory and write it by yourself. But as OS developed, there is no longer this possibility. But it is fine, since OS now handles all the HW comunication, and frankly it more convinient and much more safe (I would say the only option) in multitasking environment. So nowdays you instead of using int instructions to use BIOS mapped function or DOS function you call dll which internally than handles everything you don´t need to know about. I understand this. I also undrstand that device drivers is the piece of code that runs in ring level 0, so it can do all the HW interactions. But what I don´t understand is connection between OS and device driver. Let´s take a example - I want to make a sound card make a sound. So I call windows API to acess sound card, but what happens than? Does windows call device drivers to do so? But if it does call device driver, does it mean, that all device drivers which can be called by winAPI function, must have routines named in some specific way? I mean, when I have new sound card, must its drivers have functions named same as the old one? So Windows can actually call the same function from its perspective? But if Windows have predefined sets of functions requored by device drivers, that it cannot use new drivers that doesent existed before last version of OS came out. Please, help me understand this mess. I am really getting mad. Thanks.

  Read the article

• ODBC: when is the best time to create my database?

  - by mawg

  I have a windows program which generates PGP forms which will be filled in later. Those PHP forms will populate a database. It looks very much like MySql, but I can't be certain, so let's call it ODBC. And, yes, it does have to be a windows program. There will also be PHP forms which query the database - examine which tables and fields it contains and then generates forms which can be used to search the database (e.g, it finds a table with fields "employee_name", etc and generates a form which lets you search based on employee name. Let's call that design time and run time. At design time, some manager or IT guy or similar gets to define the nature of the database and at runtime 1) a worker fills in the form daily and 2) management can extract reports. Here's my question: given that the database is defined at "design time" (and populated at run time), where and how is best to do so? 1 I could use an ODBC interface from the windows program, but I am having difficulty finding something good to work with Delphi. Things like ADO and firebird tend to expect you to already have a database and allow you to manipulate it, but I can find no code example of how to create a database and some tables, so ... 2 I could used DOS commands from Delphi in my windows program. I just tried and got a response to MySql --version, but am not sure if MySql etc are more interactive. That is, can I use a script file or a very long stacked command with semicolons and returns separating? e.g 'CREATE DATABASE db; CREATE TABLE t1;' 3) Since the best way to work with databases seems to be PHP, perhaps my windows program could spit out a PHP page which would, when run in a browser, create the database. I have tried to make this as uncomplicated as I can, but please feel free to ask questions. It may be that there are several valid ways, but there is probably one 'better' solution in terms of ease of implementation or maintenance. Better scratch option 3. What if the user later wants to come back and have the windows program change the input form? It needs to update the database too.

  Read the article

• How to properly mix generics and inheritance to get the desired result?

  - by yamsha

  My question is not easy to explain using words, fortunately it's not too difficult to demonstrate. So, bear with me: public interface Command<R> { public R execute();//parameter R is the type of object that will be returned as the result of the execution of this command } public abstract class BasicCommand<R> { } public interface CommandProcessor<C extends Command<?>> { public <R> R process(C<R> command);//this is my question... it's illegal to do, but you understand the idea behind it, right? } //constrain BasicCommandProcessor to commands that subclass BasicCommand public class BasicCommandProcessor implements CommandProcessor<C extends BasicCommand<?>> { //here, only subclasses of BasicCommand should be allowed as arguments but these //BasicCommand object should be parameterized by R, like so: BasicCommand<R> //so the method signature should really be // public <R> R process(BasicCommand<R> command) //which would break the inheritance if the interface's method signature was instead: // public <R> R process(Command<R> command); //I really hope this fully illustrates my conundrum public <R> R process(C<R> command) { return command.execute(); } } public class CommandContext { public static void main(String... args) { BasicCommandProcessor bcp = new BasicCommandProcessor(); String textResult = bcp.execute(new BasicCommand<String>() { public String execute() { return "result"; } }); Long numericResult = bcp.execute(new BasicCommand<Long>() { public Long execute() { return 123L; } }); } } Basically, I want the generic "process" method to dictate the type of generic parameter of the Command object. The goal is to be able to restrict different implementations of CommandProcessor to certain classes that implement Command interface and at the same time to able to call the process method of any class that implements the CommandProcessor interface and have it return the object of type specified by the parametarized Command object. I'm not sure if my explanation is clear enough, so please let me know if further explanation is needed. I guess, the question is "Would this be possible to do, at all?" If the answer is "No" what would be the best work-around (I thought of a couple on my own, but I'd like some fresh ideas)

  Read the article

• sigwait in Linux (Fedora 13) vs OS X

  - by Silas

  So I'm trying to create a signal handler using pthreads which works on both OS X and Linux. The code below works on OS X but doesn't work on Fedora 13. The application is fairly simple. It spawns a pthread, registers SIGHUP and waits for a signal. After spawning the signal handler I block SIGHUP in the main thread so the signal should only be sent to the signal_handler thread. On OS X this works fine, if I compile, run and send SIGHUP to the process it prints "Got SIGHUP". On Linux it just kills the process (and prints Hangup). If I comment out the signal_handler pthread_create the application doesn't die. I know the application gets to the sigwait and blocks but instead of return the signal code it just kills the application. I ran the test using the following commands: g++ test.cc -lpthread -o test ./test & PID="$!" sleep 1 kill -1 "$PID" test.cc #include <pthread.h> #include <signal.h> #include <iostream> using namespace std; void *signal_handler(void *arg) { int sig; sigset_t set; sigemptyset(&set); sigaddset(&set, SIGHUP); while (true) { cout << "Wait for signal" << endl; sigwait(&set, &sig); if (sig == SIGHUP) { cout << "Got SIGHUP" << endl; } } } int main() { pthread_t handler; sigset_t set; // Create signal handler pthread_create(&handler, NULL, signal_handler, NULL); // Ignore SIGHUP in main thread sigfillset(&set); sigaddset(&set, SIGHUP); pthread_sigmask(SIG_BLOCK, &set, NULL); for (int i = 1; i < 5; i++) { cout << "Sleeping..." << endl; sleep(1); } pthread_join(handler, NULL); return 0; }

  Read the article

• Ajax Control Toolkit December 2013 Release

  - by Stephen.Walther

  Today, we released a new version of the Ajax Control Toolkit that contains several important bug fixes and new features. The new release contains a new Tabs control that has been entirely rewritten in jQuery. You can download the December 2013 release of the Ajax Control Toolkit at http://Ajax.CodePlex.com. Alternatively, you can install the latest version directly from NuGet: The Ajax Control Toolkit and jQuery The Ajax Control Toolkit now contains two controls written with jQuery: the ToggleButton control and the Tabs control.  The goal is to rewrite the Ajax Control Toolkit to use jQuery instead of the Microsoft Ajax Library gradually over time. The motivation for rewriting the controls in the Ajax Control Toolkit to use jQuery is to modernize the toolkit. We want to continue to accept new controls written for the Ajax Control Toolkit contributed by the community. The community wants to use jQuery. We want to make it easy for the community to submit bug fixes. The community understands jQuery. Using the Ajax Control Toolkit with a Website that Already uses jQuery But what if you are already using jQuery in your website?  Will adding the Ajax Control Toolkit to your website break your existing website?  No, and here is why. The Ajax Control Toolkit uses jQuery.noConflict() to avoid conflicting with an existing version of jQuery in a page.  The version of jQuery that the Ajax Control Toolkit uses is represented by a variable named actJQuery.  You can use actJQuery side-by-side with an existing version of jQuery in a page without conflict.Imagine, for example, that you add jQuery to an ASP.NET page using a <script> tag like this: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="TestACTDec2013.WebForm1" %> <!DOCTYPE html> <html > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <script src="Scripts/jquery-2.0.3.min.js"></script> <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:TabContainer runat="server"> <ajaxToolkit:TabPanel runat="server"> <HeaderTemplate> Tab 1 </HeaderTemplate> <ContentTemplate> <h1>First Tab</h1> </ContentTemplate> </ajaxToolkit:TabPanel> <ajaxToolkit:TabPanel runat="server"> <HeaderTemplate> Tab 2 </HeaderTemplate> <ContentTemplate> <h1>Second Tab</h1> </ContentTemplate> </ajaxToolkit:TabPanel> </ajaxToolkit:TabContainer> </div> </form> </body> </html> The page above uses the Ajax Control Toolkit Tabs control (TabContainer and TabPanel controls).  The Tabs control uses the version of jQuery that is currently bundled with the Ajax Control Toolkit (jQuery version 1.9.1). The page above also includes a <script> tag that references jQuery version 2.0.3.  You might need that particular version of jQuery, for example, to use a particular jQuery plugin. The two versions of jQuery in the page do not create a conflict. This fact can be demonstrated by entering the following two commands in the JavaScript console window: actJQuery.fn.jquery $.fn.jquery Typing actJQuery.fn.jquery will display the version of jQuery used by the Ajax Control Toolkit and typing $.fn.jquery (or jQuery.fn.jquery) will show the version of jQuery used by other jQuery plugins in the page.      Preventing jQuery from Loading Twice So by default, the Ajax Control Toolkit will not conflict with any existing version of jQuery used in your application. However, this does mean that if you are already using jQuery in your application then jQuery will be loaded twice. For performance reasons, you might want to avoid loading the jQuery library twice. By taking advantage of the <remove> element in the AjaxControlToolkit.config file, you can prevent the Ajax Control Toolkit from loading its version of jQuery. <ajaxControlToolkit> <scripts> <remove name="jQuery.jQuery.js" /> </scripts> <controlBundles> <controlBundle> <control name="TabContainer" /> <control name="TabPanel" /> </controlBundle> </controlBundles> </ajaxControlToolkit> Be careful here:  the name of the script being removed – jQuery.jQuery.js – is case-sensitive. If you remove jQuery then it is your responsibility to add the exact same version of jQuery back into your application.  You can add jQuery back using a <script> tag like this: <script src="Scripts/jquery-1.9.1.min.js"></script>     Make sure that you add the <script> tag before the server-side <form> tag or the Ajax Control Toolkit won’t detect the presence of jQuery. Alternatively, you can use the ToolkitScriptManager like this: <ajaxToolkit:ToolkitScriptManager runat="server"> <Scripts> <asp:ScriptReference Name="jQuery.jQuery.js" /> </Scripts> </ajaxToolkit:ToolkitScriptManager> The Ajax Control Toolkit is tested against the particular version of jQuery that is bundled with the Ajax Control Toolkit. Currently, the Ajax Control Toolkit uses jQuery version 1.9.1. If you attempt to use a different version of jQuery with the Ajax Control Toolkit then you will get the exception jQuery 1.9.1 is required in your JavaScript console window: If you need to use a different version of jQuery in the same page as the Ajax Control Toolkit then you should not use the <remove> element. Instead, allow the Ajax Control Toolkit to load its version of jQuery side-by-side with the other version of jQuery. Lots of Bug Fixes As usual, we implemented several important bug fixes with this release. The bug fixes concerned the following three controls: Tabs control – In the course of rewriting the Tabs control to use jQuery, we fixed several bugs related to the Tabs control. AjaxFileUpload control – We resolved an issue concerning the AjaxFileUpload and the TMP directory. HTMLEditor control – We updated the HTMLEditor control to use the new Ajax Control Toolkit bundling and minification framework. Summary I would like to thank the Superexpert team for their hard work on this release. Many long hours of coding and testing went into making this release possible.

  Read the article

• apt-get install and update fail

  - by sepehr

  I've got a problem with apt-get update and apt-get install ... commands . every time update or installing fails and errors are : Get:1 http://dl.google.com stable Release.gpg [198B] Ign http://dl.google.com/linux/chrome/deb/ stable/main Translation-en_US Get:2 http://dl.google.com stable Release [1,347B] Get:3 http://dl.google.com stable/main Packages [1,227B] Err http://32.repository.backtrack-linux.org revolution Release.gpg Could not connect to 32.repository.backtrack-linux.org:80 (37.221.173.214). - connect (110: Connection timed out) Err http://32.repository.backtrack-linux.org/ revolution/main Translation-en_US Unable to connect to 32.repository.backtrack-linux.org:http: Err http://32.repository.backtrack-linux.org/ revolution/microverse Translation-en_US Unable to connect to 32.repository.backtrack-linux.org:http: Err http://32.repository.backtrack-linux.org/ revolution/non-free Translation-en_US Unable to connect to 32.repository.backtrack-linux.org:http: Err http://32.repository.backtrack-linux.org/ revolution/testing Translation-en_US Unable to connect to 32.repository.backtrack-linux.org:http: Err http://all.repository.backtrack-linux.org revolution Release.gpg Could not connect to all.repository.backtrack-linux.org:80 (37.221.173.214). - connect (110: Connection timed out) Err http://all.repository.backtrack-linux.org/ revolution/main Translation-en_US Unable to connect to all.repository.backtrack-linux.org:http: Err http://all.repository.backtrack-linux.org/ revolution/microverse Translation-en_US Unable to connect to all.repository.backtrack-linux.org:http: Err http://all.repository.backtrack-linux.org/ revolution/non-free Translation-en_US Unable to connect to all.repository.backtrack-linux.org:http: Err http://all.repository.backtrack-linux.org/ revolution/testing Translation-en_US Unable to connect to all.repository.backtrack-linux.org:http: Ign http://32.repository.backtrack-linux.org revolution Release Ign http://all.repository.backtrack-linux.org revolution Release Ign http://32.repository.backtrack-linux.org revolution/main Packages Ign http://all.repository.backtrack-linux.org revolution/main Packages Ign http://32.repository.backtrack-linux.org revolution/microverse Packages Ign http://32.repository.backtrack-linux.org revolution/non-free Packages Ign http://32.repository.backtrack-linux.org revolution/testing Packages Ign http://all.repository.backtrack-linux.org revolution/microverse Packages Ign http://all.repository.backtrack-linux.org revolution/non-free Packages Ign http://all.repository.backtrack-linux.org revolution/testing Packages Ign http://32.repository.backtrack-linux.org revolution/main Packages Ign http://32.repository.backtrack-linux.org revolution/microverse Packages Ign http://32.repository.backtrack-linux.org revolution/non-free Packages Ign http://all.repository.backtrack-linux.org revolution/main Packages Ign http://all.repository.backtrack-linux.org revolution/microverse Packages Ign http://all.repository.backtrack-linux.org revolution/non-free Packages Ign http://all.repository.backtrack-linux.org revolution/testing Packages Err http://all.repository.backtrack-linux.org revolution/main Packages Unable to connect to all.repository.backtrack-linux.org:http: Err http://all.repository.backtrack-linux.org revolution/microverse Packages Unable to connect to all.repository.backtrack-linux.org:http: Ign http://32.repository.backtrack-linux.org revolution/testing Packages Err http://32.repository.backtrack-linux.org revolution/main Packages Unable to connect to 32.repository.backtrack-linux.org:http: Err http://32.repository.backtrack-linux.org revolution/microverse Packages Unable to connect to 32.repository.backtrack-linux.org:http: Err http://all.repository.backtrack-linux.org revolution/non-free Packages Unable to connect to all.repository.backtrack-linux.org:http: Err http://all.repository.backtrack-linux.org revolution/testing Packages Unable to connect to all.repository.backtrack-linux.org:http: Err http://32.repository.backtrack-linux.org revolution/non-free Packages Unable to connect to 32.repository.backtrack-linux.org:http: Err http://32.repository.backtrack-linux.org revolution/testing Packages Unable to connect to 32.repository.backtrack-linux.org:http: Err http://source.repository.backtrack-linux.org revolution Release.gpg Could not connect to source.repository.backtrack-linux.org:80 (37.221.173.214). - connect (110: Connection timed out) Err http://source.repository.backtrack-linux.org/ revolution/main Translation-en_US Unable to connect to source.repository.backtrack-linux.org:http: Err http://source.repository.backtrack-linux.org/ revolution/microverse Translation-en_US Unable to connect to source.repository.backtrack-linux.org:http: Err http://source.repository.backtrack-linux.org/ revolution/non-free Translation-en_US Unable to connect to source.repository.backtrack-linux.org:http: Err http://source.repository.backtrack-linux.org/ revolution/testing Translation-en_US Unable to connect to source.repository.backtrack-linux.org:http: Ign http://source.repository.backtrack-linux.org revolution Release Ign http://source.repository.backtrack-linux.org revolution/main Packages Ign http://source.repository.backtrack-linux.org revolution/microverse Packages Ign http://source.repository.backtrack-linux.org revolution/non-free Packages Ign http://source.repository.backtrack-linux.org revolution/testing Packages Ign http://source.repository.backtrack-linux.org revolution/main Packages Ign http://source.repository.backtrack-linux.org revolution/microverse Packages Ign http://source.repository.backtrack-linux.org revolution/non-free Packages Ign http://source.repository.backtrack-linux.org revolution/testing Packages Err http://source.repository.backtrack-linux.org revolution/main Packages Unable to connect to source.repository.backtrack-linux.org:http: Err http://source.repository.backtrack-linux.org revolution/microverse Packages Unable to connect to source.repository.backtrack-linux.org:http: Err http://source.repository.backtrack-linux.org revolution/non-free Packages Unable to connect to source.repository.backtrack-linux.org:http: Err http://source.repository.backtrack-linux.org revolution/testing Packages Unable to connect to source.repository.backtrack-linux.org:http: Fetched 2,772B in 1min 3s (44B/s) W: Failed to fetch http://all.repository.backtrack- \linux.org/dists/revolution/Release.gpg Could not connect to all.repository.backtrack-linux.org:80 (37.221.173.214). - connect (110: Connection timed out) W: Failed to fetch http://all.repository.backtrack-linux.org/dists/revolution/main/i18n/Translation-en_US.bz2 Unable to connect to all.repository.backtrack-linux.org:http: W: Failed to fetch http://all.repository.backtrack-linux.org/dists/revolution/microverse/i18n/Translation-en_US.bz2 Unable to connect to all.repository.backtrack-linux.org:http: W: Failed to fetch http://all.repository.backtrack-linux.org/dists/revolution/non-free/i18n/Translation-en_US.bz2 Unable to connect to all.repository.backtrack-linux.org:http: W: Failed to fetch http://all.repository.backtrack-linux.org/dists/revolution/testing/i18n/Translation-en_US.bz2 Unable to connect to all.repository.backtrack-linux.org:http: W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/Release.gpg Could not connect to 32.repository.backtrack-linux.org:80 (37.221.173.214). - connect (110: Connection timed out) W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/main/i18n/Translation-en_US.bz2 Unable to connect to 32.repository.backtrack-linux.org:http: W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/microverse/i18n/Translation-en_US.bz2 Unable to connect to 32.repository.backtrack-linux.org:http: W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/non-free/i18n/Translation-en_US.bz2 Unable to connect to 32.repository.backtrack-linux.org:http: W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/testing/i18n/Translation-en_US.bz2 Unable to connect to 32.repository.backtrack-linux.org:http: W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/Release.gpg Could not connect to source.repository.backtrack-linux.org:80 (37.221.173.214). - connect (110: Connection timed out) W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/main/i18n/Translation-en_US.bz2 Unable to connect to source.repository.backtrack-linux.org:http: W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/microverse/i18n/Translation-en_US.bz2 Unable to connect to source.repository.backtrack-linux.org:http: W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/non-free/i18n/Translation-en_US.bz2 Unable to connect to source.repository.backtrack-linux.org:http: W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/testing/i18n/Translation-en_US.bz2 Unable to connect to source.repository.backtrack-linux.org:http: W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/main/binary-i386/Packages.gz Unable to connect to 32.repository.backtrack-linux.org:http: W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/microverse/binary-i386/Packages.gz Unable to connect to 32.repository.backtrack-linux.org:http: W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/non-free/binary-i386/Packages.gz Unable to connect to 32.repository.backtrack-linux.org:http: W: Failed to fetch http://all.repository.backtrack-linux.org/dists/revolution/main/binary-i386/Packages.gz Unable to connect to all.repository.backtrack-linux.org:http: W: Failed to fetch http://all.repository.backtrack-linux.org/dists/revolution/microverse/binary-i386/Packages.gz Unable to connect to all.repository.backtrack-linux.org:http: W: Failed to fetch http://all.repository.backtrack-linux.org/dists/revolution/non-free/binary-i386/Packages.gz Unable to connect to all.repository.backtrack-linux.org:http: W: Failed to fetch http://all.repository.backtrack-linux.org/dists/revolution/testing/binary-i386/Packages.gz Unable to connect to all.repository.backtrack-linux.org:http: W: Failed to fetch http://32.repository.backtrack-linux.org/dists/revolution/testing/binary-i386/Packages.gz Unable to connect to 32.repository.backtrack-linux.org:http: W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/main/binary-i386/Packages.gz Unable to connect to source.repository.backtrack-linux.org:http: W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/microverse/binary-i386/Packages.gz Unable to connect to source.repository.backtrack-linux.org:http: W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/non-free/binary-i386/Packages.gz Unable to connect to source.repository.backtrack-linux.org:http: W: Failed to fetch http://source.repository.backtrack-linux.org/dists/revolution/testing/binary-i386/Packages.gz Unable to connect to source.repository.backtrack-linux.org:http: E: Some index files failed to download, they have been ignored, or old ones used instead. I Don't know how to get out of this ! I want to install RPM and YUM package on my backtrack ! I also searched over internet for answer . in backtrack forums or any other sites or weblogs i could'nt find a good answer ! can anyone help ??

  Read the article

• Scan a Windows PC for Viruses from a Ubuntu Live CD

  - by Trevor Bekolay

  Getting a virus is bad. Getting a virus that causes your computer to crash when you reboot is even worse. We’ll show you how to clean viruses from your computer even if you can’t boot into Windows by using a virus scanner in a Ubuntu Live CD. There are a number of virus scanners available for Ubuntu, but we’ve found that avast! is the best choice, with great detection rates and usability. Unfortunately, avast! does not have a proper 64-bit version, and forcing the install does not work properly. If you want to use avast! to scan for viruses, then ensure that you have a 32-bit Ubuntu Live CD. If you currently have a 64-bit Ubuntu Live CD on a bootable flash drive, it does not take long to wipe your flash drive and go through our guide again and select normal (32-bit) Ubuntu 9.10 instead of the x64 edition. For the purposes of fixing your Windows installation, the 64-bit Live CD will not provide any benefits. Once Ubuntu 9.10 boots up, open up Firefox by clicking on its icon in the top panel. Navigate to http://www.avast.com/linux-home-edition. Click on the Download tab, and then click on the link to download the DEB package. Save it to the default location. While avast! is downloading, click on the link to the registration form on the download page. Fill in the registration form if you do not already have a trial license for avast!. By the time you’ve filled out the registration form, avast! will hopefully be finished downloading. Open a terminal window by clicking on Applications in the top-left corner of the screen, then expanding the Accessories menu and clicking on Terminal. In the terminal window, type in the following commands, pressing enter after each line. cd Downloadssudo dpkg –i avast* This will install avast! on the live Ubuntu environment. To ensure that you can use the latest virus database, while still in the terminal window, type in the following command: sudo sysctl –w kernel.shmmax=128000000 Now we’re ready to open avast!. Click on Applications on the top-left corner of the screen, expand the Accessories folder, and click on the new avast! Antivirus item. You will first be greeted with a window that asks for your license key. Hopefully you’ve received it in your email by now; open the email that avast! sends you, copy the license key, and paste it in the Registration window. avast! Antivirus will open. You’ll notice that the virus database is outdated. Click on the Update database button and avast! will start downloading the latest virus database. To scan your Windows hard drive, you will need to “mount” it. While the virus database is downloading, click on Places on the top-left of your screen, and click on your Windows hard drive, if you can tell which one it is by its size. If you can’t tell which is the correct hard drive, then click on Computer and check out each hard drive until you find the right one. When you find it, make a note of the drive’s label, which appears in the menu bar of the file browser. Also note that your hard drive will now appear on your desktop. By now, your virus database should be updated. At the time this article was written, the most recent version was 100404-0. In the main avast! window, click on the radio button next to Selected folders and then click on the “+” button to the right of the list box. It will open up a dialog box to browse to a location. To find your Windows hard drive, click on the “>” next to the computer icon. In the expanded list, find the folder labelled “media” and click on the “>” next to it to expand it. In this list, you should be able to find the label that corresponds to your Windows hard drive. If you want to scan a certain folder, then you can go further into this hierarchy and select that folder. However, we will scan the entire hard drive, so we’ll just press OK. Click on Start scan and avast! will start scanning your hard drive. If a virus is found, you’ll be prompted to select an action. If you know that the file is a virus, then you can Delete it, but there is the possibility of false positives, so you can also choose Move to chest to quarantine it. When avast! is done scanning, it will summarize what it found on your hard drive. You can take different actions on those files at this time by right-clicking on them and selecting the appropriate action. When you’re done, click Close. Your Windows PC is now free of viruses, in the eyes of avast!. Reboot your computer and with any luck it will now boot up! Alternatives to avast! If avast! and a liberal amount of Googling doesn’t fix your problem, it’s possible that a different virus scanner will fix your obscure issue. Here are a list of other virus scanners available for Ubuntu that are either free or offer free trials. See their support forums for help on installing these virus scanners. Avira AntiVir Personal for Linux / Solaris Panda Antivirus for Linux Installation and usage guide from Ubuntu F-PROT Antivirus for Linux ClamAV installation and usage guide from Ubuntu NOD32 Antivirus for Linux Kaspersky Anti-Virus 2010 Bitdefender Antivirus for Unices Conclusion Running avast! from a Ubuntu Live CD can clean the vast majority of viruses from your Windows PC. This is another reason to always have a Ubuntu Live CD ready just in case something happens to your Windows installation! Similar Articles Productive Geek Tips Secure Computing: Windows Live OneCareHow To Remove Antivirus Live and Other Rogue/Fake Antivirus MalwareUse the Windows Key for the "Start" Menu in Ubuntu LinuxScan Files for Viruses Before You Download With Dr.WebAsk the Readers: Share Your Tips for Defeating Viruses and Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

  Read the article

• How to remove MySQL completely with config and library files on ubuntu 12.04 gnome 3.0

  - by codeartist

  I tried everything till now: sudo apt-get remove mysql-server mysql-client mysql-common sudo apt-get purge mysql-server mysql-client mysql-common sudo apt-get autoremove and even more commands... But whenever I am trying to locate mysql. I get a no. of files related to mysql command: shell>> locate mysql Output: /etc/mysql /etc/apparmor.d/usr.sbin.mysqld /etc/apparmor.d/abstractions/mysql /etc/apparmor.d/cache/usr.sbin.mysqld /etc/apparmor.d/cache/usr.sbin.mysqld-akonadi /etc/apparmor.d/local/usr.sbin.mysqld /etc/bash_completion.d/mysqladmin /etc/init/mysql.conf /etc/logcheck/ignore.d.paranoid/mysql-server-5_5 /etc/logcheck/ignore.d.server/mysql-server-5_5 /etc/logcheck/ignore.d.workstation/mysql-server-5_5 /etc/logrotate.d/mysql-server /etc/mysql/conf.d /etc/mysql/debian-start /etc/mysql/debian.cnf /etc/mysql/conf.d/mysqld_safe_syslog.cnf /home/pkr/.mysql_history /home/pkr/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,libqt4-sql-mysql,,349051c3a57da571aa832adb39177aff /home/pkr/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,mysql-client,,cbf77a486cdc80547317981a33144427 /home/pkr/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,mysql-client,,de8220dee4d957a9502caa79e8d2fdda /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,any,any,any,libqt4-sql-mysql,page,1,helpful,,17fb2e657321dc51526ee8fe9928da30 /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,any,any,any,mysql-client,page,1,helpful,,a4c1b6e8200f36ab5745c6f81f14da0a /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,ubuntu,oneiric,any,libqt4-sql-mysql,page,1,helpful,,c54295fb82b8183350cd34f22c3547ef /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,ubuntu,oneiric,any,mysql-client,page,1,helpful,,fcf201c1abff3f774af89173a84de2cc /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,ubuntu,precise,any,libqt4-sql-mysql,page,1,helpful,,0cd86648584efeccfb16119012f89540 /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,ubuntu,precise,any,mysql-client,page,1,helpful,,eb84724e9da7851ff8862a227d8bac59 /home/pkr/.local/share/akonadi/mysql.conf /home/pkr/.local/share/akonadi/db_data/mysql /home/pkr/.local/share/akonadi/db_data/mysql.err /home/pkr/.local/share/akonadi/db_data/mysql.err.old /home/pkr/.local/share/akonadi/db_data/mysql/columns_priv.MYD /home/pkr/.local/share/akonadi/db_data/mysql/columns_priv.MYI /home/pkr/.local/share/akonadi/db_data/mysql/columns_priv.frm /home/pkr/.local/share/akonadi/db_data/mysql/db.MYD /home/pkr/.local/share/akonadi/db_data/mysql/db.MYI /home/pkr/.local/share/akonadi/db_data/mysql/db.frm /home/pkr/.local/share/akonadi/db_data/mysql/event.MYD /home/pkr/.local/share/akonadi/db_data/mysql/event.MYI /home/pkr/.local/share/akonadi/db_data/mysql/event.frm /home/pkr/.local/share/akonadi/db_data/mysql/func.MYD /home/pkr/.local/share/akonadi/db_data/mysql/func.MYI /home/pkr/.local/share/akonadi/db_data/mysql/func.frm /home/pkr/.local/share/akonadi/db_data/mysql/general_log.CSM /home/pkr/.local/share/akonadi/db_data/mysql/general_log.CSV /home/pkr/.local/share/akonadi/db_data/mysql/general_log.frm /home/pkr/.local/share/akonadi/db_data/mysql/help_category.MYD /home/pkr/.local/share/akonadi/db_data/mysql/help_category.MYI /home/pkr/.local/share/akonadi/db_data/mysql/help_category.frm /home/pkr/.local/share/akonadi/db_data/mysql/help_keyword.MYD /home/pkr/.local/share/akonadi/db_data/mysql/help_keyword.MYI /home/pkr/.local/share/akonadi/db_data/mysql/help_keyword.frm /home/pkr/.local/share/akonadi/db_data/mysql/help_relation.MYD /home/pkr/.local/share/akonadi/db_data/mysql/help_relation.MYI /home/pkr/.local/share/akonadi/db_data/mysql/help_relation.frm /home/pkr/.local/share/akonadi/db_data/mysql/help_topic.MYD /home/pkr/.local/share/akonadi/db_data/mysql/help_topic.MYI /home/pkr/.local/share/akonadi/db_data/mysql/help_topic.frm /home/pkr/.local/share/akonadi/db_data/mysql/host.MYD /home/pkr/.local/share/akonadi/db_data/mysql/host.MYI /home/pkr/.local/share/akonadi/db_data/mysql/host.frm /home/pkr/.local/share/akonadi/db_data/mysql/ndb_binlog_index.MYD /home/pkr/.local/share/akonadi/db_data/mysql/ndb_binlog_index.MYI /home/pkr/.local/share/akonadi/db_data/mysql/ndb_binlog_index.frm /home/pkr/.local/share/akonadi/db_data/mysql/plugin.MYD /home/pkr/.local/share/akonadi/db_data/mysql/plugin.MYI /home/pkr/.local/share/akonadi/db_data/mysql/plugin.frm /home/pkr/.local/share/akonadi/db_data/mysql/proc.MYD /home/pkr/.local/share/akonadi/db_data/mysql/proc.MYI /home/pkr/.local/share/akonadi/db_data/mysql/proc.frm /home/pkr/.local/share/akonadi/db_data/mysql/procs_priv.MYD /home/pkr/.local/share/akonadi/db_data/mysql/procs_priv.MYI /home/pkr/.local/share/akonadi/db_data/mysql/procs_priv.frm /home/pkr/.local/share/akonadi/db_data/mysql/proxies_priv.MYD /home/pkr/.local/share/akonadi/db_data/mysql/proxies_priv.MYI /home/pkr/.local/share/akonadi/db_data/mysql/proxies_priv.frm /home/pkr/.local/share/akonadi/db_data/mysql/servers.MYD /home/pkr/.local/share/akonadi/db_data/mysql/servers.MYI /home/pkr/.local/share/akonadi/db_data/mysql/servers.frm /home/pkr/.local/share/akonadi/db_data/mysql/slow_log.CSM /home/pkr/.local/share/akonadi/db_data/mysql/slow_log.CSV /home/pkr/.local/share/akonadi/db_data/mysql/slow_log.frm /home/pkr/.local/share/akonadi/db_data/mysql/tables_priv.MYD /home/pkr/.local/share/akonadi/db_data/mysql/tables_priv.MYI /home/pkr/.local/share/akonadi/db_data/mysql/tables_priv.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_leap_second.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_leap_second.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_leap_second.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_name.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_name.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_name.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition_type.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition_type.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition_type.frm /home/pkr/.local/share/akonadi/db_data/mysql/user.MYD /home/pkr/.local/share/akonadi/db_data/mysql/user.MYI /home/pkr/.local/share/akonadi/db_data/mysql/user.frm /usr/bin/mysql /usr/bin/mysql_install_db /usr/bin/mysql_upgrade /usr/bin/mysqlcheck /usr/sbin/mysqld /usr/share/mysql /usr/share/app-install/desktop/gmysqlcc:gmysqlcc.desktop /usr/share/app-install/desktop/mysql-client.desktop /usr/share/app-install/desktop/mysql-navigator:mysql-navigator.desktop /usr/share/app-install/desktop/mysql-server.desktop /usr/share/app-install/icons/gmysqlcc-32.png /usr/share/app-install/icons/mysql-navigator.png /usr/share/doc/mysql-client-core-5.5 /usr/share/doc/mysql-server-core-5.5 /usr/share/kde4/apps/katepart/syntax/sql-mysql.xml /usr/share/man/man1/mysql.1.gz /usr/share/man/man1/mysql_install_db.1.gz /usr/share/man/man1/mysql_upgrade.1.gz /usr/share/man/man1/mysqlcheck.1.gz /usr/share/man/man8/mysqld.8.gz /var/cache/apt/archives/akonadi-backend-mysql_1.7.2-0ubuntu1_all.deb /var/cache/apt/archives/libmysqlclient-dev_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/libmysqlclient18_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/libqt4-sql-mysql_4%3a4.8.1-0ubuntu4.1_i386.deb /var/cache/apt/archives/mysql-client-5.5_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/mysql-client-core-5.5_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/mysql-client_5.5.22-0ubuntu1_all.deb /var/cache/apt/archives/mysql-common_5.5.22-0ubuntu1_all.deb /var/cache/apt/archives/mysql-server-5.5_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/mysql-server-core-5.5_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/mysql-server_5.5.22-0ubuntu1_all.deb /var/lib/dpkg/info/mysql-client-core-5.5.list /var/lib/dpkg/info/mysql-client-core-5.5.md5sums /var/lib/dpkg/info/mysql-server-5.5.list /var/lib/dpkg/info/mysql-server-5.5.postrm /var/lib/dpkg/info/mysql-server-core-5.5.list /var/lib/dpkg/info/mysql-server-core-5.5.md5sums /var/log/mysql /var/log/mysql.err /var/log/mysql.log /var/log/mysql.log.1.gz /var/log/mysql.log.2.gz /var/log/mysql.log.3.gz /var/log/mysql.log.4.gz /var/log/mysql.log.5.gz /var/log/mysql.log.6.gz /var/log/mysql.log.7.gz /var/log/upstart/mysql.log.1.gz /var/log/upstart/mysql.log.2.gz /var/log/upstart/mysql.log.3.gz /var/log/upstart/mysql.log.4.gz /var/log/upstart/mysql.log.5.gz /var/log/upstart/mysql.log.6.gz /var/log/upstart/mysql.log.7.gz What should I do now? Please help me out in this :( I was trying to find out if there is any way I can remove mysql related every file and then reinstall mysql. I need it for Qt connectivity. I don't understand what to do! Please help :(

  Read the article

• Oracle Enterprise Manager 11g Application Management Suite for Oracle E-Business Suite Now Available

  - by chung.wu

  Oracle Enterprise Manager 11g Application Management Suite for Oracle E-Business Suite is now available. The management suite combines features that were available in the standalone Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite with Oracle's market leading real user monitoring and configuration management capabilities to provide the most complete solution for managing E-Business Suite applications. The features that were available in the standalone management packs are now packaged into Oracle E-Business Suite Plug-in 4.0, which is now fully certified with Oracle Enterprise Manager 11g Grid Control. This latest plug-in extends Grid Control with E-Business Suite specific management capabilities and features enhanced change management support. In addition, this latest release of Application Management Suite for Oracle E-Business Suite also includes numerous real user monitoring improvements. General Enhancements This new release of Application Management Suite for Oracle E-Business Suite offers the following key capabilities: Oracle Enterprise Manager 11g Grid Control Support: All components of the management suite are certified with Oracle Enterprise Manager 11g Grid Control. Built-in Diagnostic Ability: This release has numerous major enhancements that provide the necessary intelligence to determine if the product has been installed and configured correctly. There are diagnostics for Discovery, Cloning, and User Monitoring that will validate if the appropriate patches, privileges, setups, and profile options have been configured. This feature improves the setup and configuration time to be up and operational. Lifecycle Automation Enhancements Application Management Suite for Oracle E-Business Suite provides a centralized view to monitor and orchestrate changes (both functional and technical) across multiple Oracle E-Business Suite systems. In this latest release, it provides even more control and flexibility in managing Oracle E-Business Suite changes.Change Management: Built-in Diagnostic Ability: This latest release has numerous major enhancements that provide the necessary intelligence to determine if the product has been installed and configured correctly. There are diagnostics for Customization Manager, Patch Manager, and Setup Manager that will validate if the appropriate patches, privileges, setups, and profile options have been configured. Enhancing the setup time and configuration time to be up and operational. Customization Manager: Multi-Node Custom Application Registration: This feature automates the process of registering and validating custom products/applications on every node in a multi-node EBS system. Public/Private File Source Mappings and E-Business Suite Mappings: File Source Mappings & E-Business Suite Mappings can be created and marked as public or private. Only the creator/owner can define/edit his/her own mappings. Users can use public mappings, but cannot edit or change settings. Test Checkout Command for Versions: This feature allows you to test/verify checkout commands at the version level within the File Source Mapping page. Prerequisite Patch Validation: You can specify prerequisite patches for Customization packages and for Release 12 Oracle E-Business Suite packages. Destination Path Population: You can now automatically populate the Destination Path for common file types during package construction. OAF File Type Support: Ability to package Oracle Application Framework (OAF) customizations and deploy them across multiple Oracle E-Business Suite instances. Extended PLL Support: Ability to distinguish between different types of PLLs (that is, Report and Forms PLL files). Providing better granularity when managing PLL objects. Enhanced Standard Checker: Provides greater and more comprehensive list of coding standards that are verified during the package build process (for example, File Driver exceptions, Java checks, XML checks, SQL checks, etc.) HTML Package Readme: The package Readme is in HTML format and includes the file listing. Advanced Package Search Capabilities: The ability to utilize more criteria within the advanced search package (that is, Public, Last Updated by, Files Source Mapping, and E-Business Suite Mapping). Enhanced Package Build Notifications: More detailed information on the results of a package build process. Better, more detailed troubleshooting guidance in the event of build failures. Patch Manager:Staged Patches: Ability to run Patch Manager with no external internet access. Customer can download Oracle E-Business Suite patches into a shared location for Patch Manager to access and apply. Supports highly secured production environments that prohibit external internet connections. Support for Superseded Patches: Automatic check for superseded patches. Allows users to easily add superseded patches into the Patch Run. More comprehensive and correct Patch Runs. Removes many manual and laborious tasks, frees up Apps DBAs for higher value-added tasks. Automatic Primary Node Identification: Users can now specify which is the "primary node" (that is, which node hosts the Shared APPL_TOP) during the Patch Run interview process, available for Release 12 only. Setup Manager:Preview Extract Results: Ability to execute an extract in "proof mode", and examine the query results, to determine accuracy. Used in conjunction with the "where" clause in Advanced Filtering. This feature can provide better and more accurate fine tuning of extracts. Use Uploaded Extracts in New Projects: Ability to incorporate uploaded extracts in new projects via new LOV fields in package construction. Leverages the Setup Manager repository to access extracts that have been uploaded. Allows customer to reuse uploaded extracts to provision new instances. Re-use Existing (that is, historical) Extracts in New Projects: Ability to incorporate existing extracts in new projects via new LOV fields in package construction. Leverages the Setup Manager repository to access point-in-time extracts (snapshots) of configuration data. Allows customer to reuse existing extracts to provision new instances. Allows comparative historical reporting of identical APIs, executed at different times. Support for BR100 formats: Setup Manager can now automatically produce reports in the BR100 format. Native support for industry standard formats. Concurrent Manager API Support: General Foundation now provides an API for management of "Concurrent Manager" configuration data. Ability to migrate Concurrent Managers from one instance to another. Complete the setup once and never again; no need to redefine the Concurrent Managers. User Experience Management Enhancements Application Management Suite for Oracle E-Business Suite includes comprehensive capabilities for user experience management, supporting both real user and synthetic transaction based user monitoring techniques. This latest release of the management suite include numerous improvements in real user monitoring support. KPI Reporting: Configurable decimal precision for reporting of KPI and SLA values. By default, this is two decimal places. KPI numerator and denominator information. It is now possible to view KPI numerator and denominator information, and to have it available for export. Content Messages Processing: The application content message facility has been extended to distinguish between notifications and errors. In addition, it is now possible to specify matching rules that can be used to refine a selected content message specification. Note this is only available for XPath-based (not literal) message contents. Data Export: The Enriched data export facility has been significantly enhanced to provide improved performance and accessibility. Data is no longer stored within XML-based files, but is now stored within the Reporter database. However, it is possible to configure an alternative database for its storage. Access to the export data is through SQL. With this enhancement, it is now more easy than ever to use tools such as Oracle Business Intelligence Enterprise Edition to analyze correlated data collected from real user monitoring and business data sources. SNMP Traps for System Events: Previously, the SNMP notification facility was only available for KPI alerting. It has now been extended to support the generation of SNMP traps for system events, to provide external health monitoring of the RUEI system processes. Performance Improvements: Enhanced dashboard performance. The dashboard facility has been enhanced to support the parallel loading of items. In the case of dashboards containing large numbers of items, this can result in a significant performance improvement. Initial period selection within Data Browser and reports. The User Preferences facility has been extended to allow you to specify the initial period selection when first entering the Data Browser or reports facility. The default is the last hour. Performance improvement when querying the all sessions group. Technical Prerequisites, Download and Installation Instructions The Linux version of the plug-in is available for immediate download from Oracle Technology Network or Oracle eDelivery. For specific information regarding technical prerequisites, product download and installation, please refer to My Oracle Support note 1224313.1. The following certifications are in progress: * Oracle Solaris on SPARC (64-bit) (9, 10) * HP-UX Itanium (11.23, 11.31) * HP-UX PA-RISC (64-bit) (11.23, 11.31) * IBM AIX on Power Systems (64-bit) (5.3, 6.1)

  Read the article

• VS 2010 SP1 (Beta) and IIS Express

  - by ScottGu

  Last month we released the VS 2010 Service Pack 1 (SP1) Beta.  You can learn more about the VS 2010 SP1 Beta from Jason Zander’s two blog posts about it, and from Scott Hanselman’s blog post that covers some of the new capabilities enabled with it.  You can download and install the VS 2010 SP1 Beta here. IIS Express Earlier this summer I blogged about IIS Express.  IIS Express is a free version of IIS 7.5 that is optimized for developer scenarios.  We think it combines the ease of use of the ASP.NET Web Server (aka Cassini) currently built-into VS today with the full power of IIS.  Specifically: It’s lightweight and easy to install (less than 5Mb download and a quick install) It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, and other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all Windows OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk.  It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios. Visual Studio 2010 SP1 adds support for IIS Express – and you can start to take advantage of this starting with last month’s VS 2010 SP1 Beta release. Downloading and Installing IIS Express IIS Express isn’t included as part of the VS 2010 SP1 Beta.  Instead it is a separate ~4MB download which you can download and install using this link (it uses WebPI to install it).  Once IIS Express is installed, VS 2010 SP1 will enable some additional IIS Express commands and dialog options that allow you to easily use it. Enabling IIS Express for Existing Projects Visual Studio today defaults to using the built-in ASP.NET Development Server (aka Cassini) when running ASP.NET Projects: Converting your existing projects to use IIS Express is really easy.  You can do this by opening up the project properties dialog of an existing project, and then by clicking the “web” tab within it and selecting the “Use IIS Express” checkbox. Or even simpler, just right-click on your existing project, and select the “Use IIS Express…” menu command: And now when you run or debug your project you’ll see that IIS Express now starts up and runs automatically as your web-server: You can optionally right-click on the IIS Express icon within your system tray to see/browse all of sites and applications running on it: Note that if you ever want to revert back to using the ASP.NET Development Server you can do this by right-clicking the project again and then select the “Use Visual Studio Development Server” option (or go into the project properties, click the web tab, and uncheck IIS Express).  This will revert back to the ASP.NET Development Server the next time you run the project. IIS Express Properties Visual Studio 2010 SP1 exposes several new IIS Express configuration options that you couldn’t previously set with the ASP.NET Development Server.  Some of these are exposed via the property grid of your project (select the project node in the solution explorer and then change them via the property window): For example, enabling something like SSL support (which is not possible with the ASP.NET Development Server) can now be done simply by changing the “SSL Enabled” property to “True”: Once this is done IIS Express will expose both an HTTP and HTTPS endpoint for the project that we can use: SSL Self Signed Certs IIS Express ships with a self-signed SSL cert that it installs as part of setup – which removes the need for you to install your own certificate to use SSL during development.  Once you change the above drop-down to enable SSL, you’ll be able to browse to your site with the appropriate https:// URL prefix and it will connect via SSL. One caveat with self-signed certificates, though, is that browsers (like IE) will go out of their way to warn you that they aren’t to be trusted: You can mark the certificate as trusted to avoid seeing dialogs like this – or just keep the certificate un-trusted and press the “continue” button when the browser warns you not to trust your local web server. Additional IIS Settings IIS Express uses its own per-user ApplicationHost.config file to configure default server behavior.  Because it is per-user, it can be configured by developers who do not have admin credentials – unlike the full IIS.  You can customize all IIS features and settings via it if you want ultimate server customization (for example: to use your own certificates for SSL instead of self-signed ones). We recommend storing all app specific settings for IIS and ASP.NET within the web.config file which is part of your project – since that makes deploying apps easier (since the settings can be copied with the application content).  IIS (since IIS 7) no longer uses the metabase, and instead uses the same web.config configuration files that ASP.NET has always supported – which makes xcopy/ftp based deployment much easier. Making IIS Express your Default Web Server Above we looked at how we can convert existing sites that use the ASP.NET Developer Web Server to instead use IIS Express.  You can configure Visual Studio to use IIS Express as the default web server for all new projects by clicking the Tools->Options menu  command and opening up the Projects and Solutions->Web Projects node with the Options dialog: Clicking the “Use IIS Express for new file-based web site and projects” checkbox will cause Visual Studio to use it for all new web site and projects. Summary We think IIS Express makes it even easier to build, run and test web applications.  It works with all versions of ASP.NET and supports all ASP.NET application types (including obviously both ASP.NET Web Forms and ASP.NET MVC applications).  Because IIS Express is based on the IIS 7.5 codebase, you have a full web-server feature-set that you can use.  This means you can build and run your applications just like they’ll work on a real production web-server.  In addition to supporting ASP.NET, IIS Express also supports Classic ASP and other file-types and extensions supported by IIS – which also makes it ideal for sites that combine a variety of different technologies. Best of all – you do not need to change any code to take advantage of it.  As you can see above, updating existing Visual Studio web projects to use it is trivial.  You can begin to take advantage of IIS Express today using the VS 2010 SP1 Beta. Hope this helps, Scott

  Read the article

• How to Reduce the Size of Your WinSXS Folder on Windows 7 or 8

  - by Chris Hoffman

  The WinSXS folder at C:\Windows\WinSXS is massive and continues to grow the longer you have Windows installed. This folder builds up unnecessary files over time, such as old versions of system components. This folder also contains files for uninstalled, disabled Windows components. Even if you don’t have a Windows component installed, it will be present in your WinSXS folder, taking up space. Why the WinSXS Folder Gets to Big The WinSXS folder contains all Windows system components. In fact, component files elsewhere in Windows are just links to files contained in the WinSXS folder. The WinSXS folder contains every operating system file. When Windows installs updates, it drops the new Windows component in the WinSXS folder and keeps the old component in the WinSXS folder. This means that every Windows Update you install increases the size of your WinSXS folder. This allows you to uninstall operating system updates from the Control Panel, which can be useful in the case of a buggy update — but it’s a feature that’s rarely used. Windows 7 dealt with this by including a feature that allows Windows to clean up old Windows update files after you install a new Windows service pack. The idea was that the system could be cleaned up regularly along with service packs. However, Windows 7 only saw one service pack — Service Pack 1 — released in 2010. Microsoft has no intention of launching another. This means that, for more than three years, Windows update uninstallation files have been building up on Windows 7 systems and couldn’t be easily removed. Clean Up Update Files To fix this problem, Microsoft recently backported a feature from Windows 8 to Windows 7. They did this without much fanfare — it was rolled out in a typical minor operating system update, the kind that don’t generally add new features. To clean up such update files, open the Disk Cleanup wizard (tap the Windows key, type “disk cleanup” into the Start menu, and press Enter). Click the Clean up System Files button, enable the Windows Update Cleanup option and click OK. If you’ve been using your Windows 7 system for a few years, you’ll likely be able to free several gigabytes of space. The next time you reboot after doing this, Windows will take a few minutes to clean up system files before you can log in and use your desktop. If you don’t see this feature in the Disk Cleanup window, you’re likely behind on your updates — install the latest updates from Windows Update. Windows 8 and 8.1 include built-in features that do this automatically. In fact, there’s a StartComponentCleanup scheduled task included with Windows that will automatically run in the background, cleaning up components 30 days after you’ve installed them. This 30-day period gives you time to uninstall an update if it causes problems. If you’d like to manually clean up updates, you can also use the Windows Update Cleanup option in the Disk Usage window, just as you can on Windows 7. (To open it, tap the Windows key, type “disk cleanup” to perform a search, and click the “Free up disk space by removing unnecessary files” shortcut that appears.) Windows 8.1 gives you more options, allowing you to forcibly remove all previous versions of uninstalled components, even ones that haven’t been around for more than 30 days. These commands must be run in an elevated Command Prompt — in other words, start the Command Prompt window as Administrator. For example, the following command will uninstall all previous versions of components without the scheduled task’s 30-day grace period: DISM.exe /online /Cleanup-Image /StartComponentCleanup The following command will remove files needed for uninstallation of service packs. You won’t be able to uninstall any currently installed service packs after running this command: DISM.exe /online /Cleanup-Image /SPSuperseded The following command will remove all old versions of every component. You won’t be able to uninstall any currently installed service packs or updates after this completes: DISM.exe /online /Cleanup-Image /StartComponentCleanup /ResetBase Remove Features on Demand Modern versions of Windows allow you to enable or disable Windows features on demand. You’ll find a list of these features in the Windows Features window you can access from the Control Panel. Even features you don’t have installed — that is, the features you see unchecked in this window — are stored on your hard drive in your WinSXS folder. If you choose to install them, they’ll be made available from your WinSXS folder. This means you won’t have to download anything or provide Windows installation media to install these features. However, these features take up space. While this shouldn’t matter on typical computers, users with extremely low amounts of storage or Windows server administrators who want to slim their Windows installs down to the smallest possible set of system files may want to get these files off their hard drives. For this reason, Windows 8 added a new option that allows you to remove these uninstalled components from the WinSXS folder entirely, freeing up space. If you choose to install the removed components later, Windows will prompt you to download the component files from Microsoft. To do this, open a Command Prompt window as Administrator. Use the following command to see the features available to you: DISM.exe /Online /English /Get-Features /Format:Table You’ll see a table of feature names and their states. To remove a feature from your system, you’d use the following command, replacing NAME with the name of the feature you want to remove. You can get the feature name you need from the table above. DISM.exe /Online /Disable-Feature /featurename:NAME /Remove If you run the /GetFeatures command again, you’ll now see that the feature has a status of “Disabled with Payload Removed” instead of just “Disabled.” That’s how you know it’s not taking up space on your computer’s hard drive. If you’re trying to slim down a Windows system as much as possible, be sure to check out our lists of ways to free up disk space on Windows and reduce the space used by system files.     

  Read the article

• How to remove MySQL completely with config and library files?

  - by codeartist

  I tried everything till now: sudo apt-get remove mysql-server mysql-client mysql-common sudo apt-get purge mysql-server mysql-client mysql-common sudo apt-get autoremove and even more commands... But whenever I am trying to locate mysql. I get a no. of files related to mysql command: shell>> locate mysql Output: /etc/mysql /etc/apparmor.d/usr.sbin.mysqld /etc/apparmor.d/abstractions/mysql /etc/apparmor.d/cache/usr.sbin.mysqld /etc/apparmor.d/cache/usr.sbin.mysqld-akonadi /etc/apparmor.d/local/usr.sbin.mysqld /etc/bash_completion.d/mysqladmin /etc/init/mysql.conf /etc/logcheck/ignore.d.paranoid/mysql-server-5_5 /etc/logcheck/ignore.d.server/mysql-server-5_5 /etc/logcheck/ignore.d.workstation/mysql-server-5_5 /etc/logrotate.d/mysql-server /etc/mysql/conf.d /etc/mysql/debian-start /etc/mysql/debian.cnf /etc/mysql/conf.d/mysqld_safe_syslog.cnf /home/pkr/.mysql_history /home/pkr/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,libqt4-sql-mysql,,349051c3a57da571aa832adb39177aff /home/pkr/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,mysql-client,,cbf77a486cdc80547317981a33144427 /home/pkr/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,mysql-client,,de8220dee4d957a9502caa79e8d2fdda /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,any,any,any,libqt4-sql-mysql,page,1,helpful,,17fb2e657321dc51526ee8fe9928da30 /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,any,any,any,mysql-client,page,1,helpful,,a4c1b6e8200f36ab5745c6f81f14da0a /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,ubuntu,oneiric,any,libqt4-sql-mysql,page,1,helpful,,c54295fb82b8183350cd34f22c3547ef /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,ubuntu,oneiric,any,mysql-client,page,1,helpful,,fcf201c1abff3f774af89173a84de2cc /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,ubuntu,precise,any,libqt4-sql-mysql,page,1,helpful,,0cd86648584efeccfb16119012f89540 /home/pkr/.cache/software-center/rnrclient/reviews.ubuntu.com,reviews,api,1.0,reviews,filter,en,ubuntu,precise,any,mysql-client,page,1,helpful,,eb84724e9da7851ff8862a227d8bac59 /home/pkr/.local/share/akonadi/mysql.conf /home/pkr/.local/share/akonadi/db_data/mysql /home/pkr/.local/share/akonadi/db_data/mysql.err /home/pkr/.local/share/akonadi/db_data/mysql.err.old /home/pkr/.local/share/akonadi/db_data/mysql/columns_priv.MYD /home/pkr/.local/share/akonadi/db_data/mysql/columns_priv.MYI /home/pkr/.local/share/akonadi/db_data/mysql/columns_priv.frm /home/pkr/.local/share/akonadi/db_data/mysql/db.MYD /home/pkr/.local/share/akonadi/db_data/mysql/db.MYI /home/pkr/.local/share/akonadi/db_data/mysql/db.frm /home/pkr/.local/share/akonadi/db_data/mysql/event.MYD /home/pkr/.local/share/akonadi/db_data/mysql/event.MYI /home/pkr/.local/share/akonadi/db_data/mysql/event.frm /home/pkr/.local/share/akonadi/db_data/mysql/func.MYD /home/pkr/.local/share/akonadi/db_data/mysql/func.MYI /home/pkr/.local/share/akonadi/db_data/mysql/func.frm /home/pkr/.local/share/akonadi/db_data/mysql/general_log.CSM /home/pkr/.local/share/akonadi/db_data/mysql/general_log.CSV /home/pkr/.local/share/akonadi/db_data/mysql/general_log.frm /home/pkr/.local/share/akonadi/db_data/mysql/help_category.MYD /home/pkr/.local/share/akonadi/db_data/mysql/help_category.MYI /home/pkr/.local/share/akonadi/db_data/mysql/help_category.frm /home/pkr/.local/share/akonadi/db_data/mysql/help_keyword.MYD /home/pkr/.local/share/akonadi/db_data/mysql/help_keyword.MYI /home/pkr/.local/share/akonadi/db_data/mysql/help_keyword.frm /home/pkr/.local/share/akonadi/db_data/mysql/help_relation.MYD /home/pkr/.local/share/akonadi/db_data/mysql/help_relation.MYI /home/pkr/.local/share/akonadi/db_data/mysql/help_relation.frm /home/pkr/.local/share/akonadi/db_data/mysql/help_topic.MYD /home/pkr/.local/share/akonadi/db_data/mysql/help_topic.MYI /home/pkr/.local/share/akonadi/db_data/mysql/help_topic.frm /home/pkr/.local/share/akonadi/db_data/mysql/host.MYD /home/pkr/.local/share/akonadi/db_data/mysql/host.MYI /home/pkr/.local/share/akonadi/db_data/mysql/host.frm /home/pkr/.local/share/akonadi/db_data/mysql/ndb_binlog_index.MYD /home/pkr/.local/share/akonadi/db_data/mysql/ndb_binlog_index.MYI /home/pkr/.local/share/akonadi/db_data/mysql/ndb_binlog_index.frm /home/pkr/.local/share/akonadi/db_data/mysql/plugin.MYD /home/pkr/.local/share/akonadi/db_data/mysql/plugin.MYI /home/pkr/.local/share/akonadi/db_data/mysql/plugin.frm /home/pkr/.local/share/akonadi/db_data/mysql/proc.MYD /home/pkr/.local/share/akonadi/db_data/mysql/proc.MYI /home/pkr/.local/share/akonadi/db_data/mysql/proc.frm /home/pkr/.local/share/akonadi/db_data/mysql/procs_priv.MYD /home/pkr/.local/share/akonadi/db_data/mysql/procs_priv.MYI /home/pkr/.local/share/akonadi/db_data/mysql/procs_priv.frm /home/pkr/.local/share/akonadi/db_data/mysql/proxies_priv.MYD /home/pkr/.local/share/akonadi/db_data/mysql/proxies_priv.MYI /home/pkr/.local/share/akonadi/db_data/mysql/proxies_priv.frm /home/pkr/.local/share/akonadi/db_data/mysql/servers.MYD /home/pkr/.local/share/akonadi/db_data/mysql/servers.MYI /home/pkr/.local/share/akonadi/db_data/mysql/servers.frm /home/pkr/.local/share/akonadi/db_data/mysql/slow_log.CSM /home/pkr/.local/share/akonadi/db_data/mysql/slow_log.CSV /home/pkr/.local/share/akonadi/db_data/mysql/slow_log.frm /home/pkr/.local/share/akonadi/db_data/mysql/tables_priv.MYD /home/pkr/.local/share/akonadi/db_data/mysql/tables_priv.MYI /home/pkr/.local/share/akonadi/db_data/mysql/tables_priv.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_leap_second.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_leap_second.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_leap_second.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_name.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_name.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_name.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition.frm /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition_type.MYD /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition_type.MYI /home/pkr/.local/share/akonadi/db_data/mysql/time_zone_transition_type.frm /home/pkr/.local/share/akonadi/db_data/mysql/user.MYD /home/pkr/.local/share/akonadi/db_data/mysql/user.MYI /home/pkr/.local/share/akonadi/db_data/mysql/user.frm /usr/bin/mysql /usr/bin/mysql_install_db /usr/bin/mysql_upgrade /usr/bin/mysqlcheck /usr/sbin/mysqld /usr/share/mysql /usr/share/app-install/desktop/gmysqlcc:gmysqlcc.desktop /usr/share/app-install/desktop/mysql-client.desktop /usr/share/app-install/desktop/mysql-navigator:mysql-navigator.desktop /usr/share/app-install/desktop/mysql-server.desktop /usr/share/app-install/icons/gmysqlcc-32.png /usr/share/app-install/icons/mysql-navigator.png /usr/share/doc/mysql-client-core-5.5 /usr/share/doc/mysql-server-core-5.5 /usr/share/kde4/apps/katepart/syntax/sql-mysql.xml /usr/share/man/man1/mysql.1.gz /usr/share/man/man1/mysql_install_db.1.gz /usr/share/man/man1/mysql_upgrade.1.gz /usr/share/man/man1/mysqlcheck.1.gz /usr/share/man/man8/mysqld.8.gz /var/cache/apt/archives/akonadi-backend-mysql_1.7.2-0ubuntu1_all.deb /var/cache/apt/archives/libmysqlclient-dev_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/libmysqlclient18_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/libqt4-sql-mysql_4%3a4.8.1-0ubuntu4.1_i386.deb /var/cache/apt/archives/mysql-client-5.5_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/mysql-client-core-5.5_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/mysql-client_5.5.22-0ubuntu1_all.deb /var/cache/apt/archives/mysql-common_5.5.22-0ubuntu1_all.deb /var/cache/apt/archives/mysql-server-5.5_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/mysql-server-core-5.5_5.5.22-0ubuntu1_i386.deb /var/cache/apt/archives/mysql-server_5.5.22-0ubuntu1_all.deb /var/lib/dpkg/info/mysql-client-core-5.5.list /var/lib/dpkg/info/mysql-client-core-5.5.md5sums /var/lib/dpkg/info/mysql-server-5.5.list /var/lib/dpkg/info/mysql-server-5.5.postrm /var/lib/dpkg/info/mysql-server-core-5.5.list /var/lib/dpkg/info/mysql-server-core-5.5.md5sums /var/log/mysql /var/log/mysql.err /var/log/mysql.log /var/log/mysql.log.1.gz /var/log/mysql.log.2.gz /var/log/mysql.log.3.gz /var/log/mysql.log.4.gz /var/log/mysql.log.5.gz /var/log/mysql.log.6.gz /var/log/mysql.log.7.gz /var/log/upstart/mysql.log.1.gz /var/log/upstart/mysql.log.2.gz /var/log/upstart/mysql.log.3.gz /var/log/upstart/mysql.log.4.gz /var/log/upstart/mysql.log.5.gz /var/log/upstart/mysql.log.6.gz /var/log/upstart/mysql.log.7.gz What should I do now? Please help me out in this :( I was trying to find out if there is any way I can remove mysql related every file and then reinstall mysql. I need it for Qt connectivity. I don't understand what to do! Please help :(

  Read the article

• BNF – how to read syntax?

  - by Piotr Rodak

  A few days ago I read post of Jen McCown (blog) about her idea of blogging about random articles from Books Online. I think this is a great idea, even if Jen says that it’s not exciting or sexy. I noticed that many of the questions that appear on forums and other media arise from pure fact that people asking questions didn’t bother to read and understand the manual – Books Online. Jen came up with a brilliant, concise acronym that describes very well the category of posts about Books Online – RTFM365. I take liberty of tagging this post with the same acronym. I often come across questions of type – ‘Hey, i am trying to create a table, but I am getting an error’. The error often says that the syntax is invalid. 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT DEFAULT Guid_Default NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); 5 The answer is usually(1), ‘Ok, let me check it out.. Ah yes – you have to put name of the DEFAULT constraint before the type of constraint: 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT Guid_Default DEFAULT NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); Why many people stumble on syntax errors? Is the syntax poorly documented? No, the issue is, that correct syntax of the CREATE TABLE statement is documented very well in Books Online and is.. intimidating. Many people can be taken aback by the rather complex block of code that describes all intricacies of the statement. However, I don’t know better way of defining syntax of the statement or command. The notation that is used to describe syntax in Books Online is a form of Backus-Naur notatiion, called BNF for short sometimes. This is a notation that was invented around 50 years ago, and some say that even earlier, around 400 BC – would you believe? Originally it was used to define syntax of, rather ancient now, ALGOL programming language (in 1950’s, not in ancient India). If you look closer at the definition of the BNF, it turns out that the principles of this syntax are pretty simple. Here are a few bullet points: italic_text is a placeholder for your identifier <italic_text_in_angle_brackets> is a definition which is described further. [everything in square brackets] is optional {everything in curly brackets} is obligatory everything | separated | by | operator is an alternative ::= “assigns” definition to an identifier Yes, it looks like these six simple points give you the key to understand even the most complicated syntax definitions in Books Online. Books Online contain an article about syntax conventions – have you ever read it? Let’s have a look at fragment of the CREATE TABLE statement: 1 CREATE TABLE 2 [ database_name . [ schema_name ] . | schema_name . ] table_name 3 ( { <column_definition> | <computed_column_definition> 4 | <column_set_definition> } 5 [ <table_constraint> ] [ ,...n ] ) 6 [ ON { partition_scheme_name ( partition_column_name ) | filegroup 7 | "default" } ] 8 [ { TEXTIMAGE_ON { filegroup | "default" } ] 9 [ FILESTREAM_ON { partition_scheme_name | filegroup 10 | "default" } ] 11 [ WITH ( <table_option> [ ,...n ] ) ] 12 [ ; ] Let’s look at line 2 of the above snippet: This line uses rules 3 and 5 from the list. So you know that you can create table which has specified one of the following. just name – table will be created in default user schema schema name and table name – table will be created in specified schema database name, schema name and table name – table will be created in specified database, in specified schema database name, .., table name – table will be created in specified database, in default schema of the user. Note that this single line of the notation describes each of the naming schemes in deterministic way. The ‘optionality’ of the schema_name element is nested within database_name.. section. You can use either database_name and optional schema name, or just schema name – this is specified by the pipe character ‘|’. The error that user gets with execution of the first script fragment in this post is as follows: Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'DEFAULT'. Ok, let’s have a look how to find out the correct syntax. Line number 3 of the BNF fragment above contains reference to <column_definition>. Since column_definition is in angle brackets, we know that this is a reference to notion described further in the code. And indeed, the very next fragment of BNF contains syntax of the column definition. 1 <column_definition> ::= 2 column_name <data_type> 3 [ FILESTREAM ] 4 [ COLLATE collation_name ] 5 [ NULL | NOT NULL ] 6 [ 7 [ CONSTRAINT constraint_name ] DEFAULT constant_expression ] 8 | [ IDENTITY [ ( seed ,increment ) ] [ NOT FOR REPLICATION ] 9 ] 10 [ ROWGUIDCOL ] [ <column_constraint> [ ...n ] ] 11 [ SPARSE ] Look at line 7 in the above fragment. It says, that the column can have a DEFAULT constraint which, if you want to name it, has to be prepended with [CONSTRAINT constraint_name] sequence. The name of the constraint is optional, but I strongly recommend you to make the effort of coming up with some meaningful name yourself. So the correct syntax of the CREATE TABLE statement from the beginning of the article is like this: 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT Guid_Default DEFAULT NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); That is practically everything you should know about BNF. I encourage you to study the syntax definitions for various statements and commands in Books Online, you can find really interesting things hidden there. Technorati Tags: SQL Server,t-sql,BNF,syntax   (1) No, my answer usually is a question – ‘What error message? What does it say?’. You’d be surprised to know how many people think I can go through time and space and look at their screen at the moment they received the error.

  Read the article

• Dynamic Types and DynamicObject References in C#

  - by Rick Strahl

  I've been working a bit with C# custom dynamic types for several customers recently and I've seen some confusion in understanding how dynamic types are referenced. This discussion specifically centers around types that implement IDynamicMetaObjectProvider or subclass from DynamicObject as opposed to arbitrary type casts of standard .NET types. IDynamicMetaObjectProvider types  are treated special when they are cast to the dynamic type. Assume for a second that I've created my own implementation of a custom dynamic type called DynamicFoo which is about as simple of a dynamic class that I can think of:public class DynamicFoo : DynamicObject { Dictionary<string, object> properties = new Dictionary<string, object>(); public string Bar { get; set; } public DateTime Entered { get; set; } public override bool TryGetMember(GetMemberBinder binder, out object result) { result = null; if (!properties.ContainsKey(binder.Name)) return false; result = properties[binder.Name]; return true; } public override bool TrySetMember(SetMemberBinder binder, object value) { properties[binder.Name] = value; return true; } } This class has an internal dictionary member and I'm exposing this dictionary member through a dynamic by implementing DynamicObject. This implementation exposes the properties dictionary so the dictionary keys can be referenced like properties (foo.NewProperty = "Cool!"). I override TryGetMember() and TrySetMember() which are fired at runtime every time you access a 'property' on a dynamic instance of this DynamicFoo type. Strong Typing and Dynamic Casting I now can instantiate and use DynamicFoo in a couple of different ways: Strong TypingDynamicFoo fooExplicit = new DynamicFoo(); var fooVar = new DynamicFoo(); These two commands are essentially identical and use strong typing. The compiler generates identical code for both of them. The var statement is merely a compiler directive to infer the type of fooVar at compile time and so the type of fooExplicit is DynamicFoo, just like fooExplicit. This is very static - nothing dynamic about it - and it completely ignores the IDynamicMetaObjectProvider implementation of my class above as it's never used. Using either of these I can access the native properties:DynamicFoo fooExplicit = new DynamicFoo();// static typing assignmentsfooVar.Bar = "Barred!"; fooExplicit.Entered = DateTime.Now; // echo back static values Console.WriteLine(fooVar.Bar); Console.WriteLine(fooExplicit.Entered); but I have no access whatsoever to the properties dictionary. Basically this creates a strongly typed instance of the type with access only to the strongly typed interface. You get no dynamic behavior at all. The IDynamicMetaObjectProvider features don't kick in until you cast the type to dynamic. If I try to access a non-existing property on fooExplicit I get a compilation error that tells me that the property doesn't exist. Again, it's clearly and utterly non-dynamic. Dynamicdynamic fooDynamic = new DynamicFoo(); fooDynamic on the other hand is created as a dynamic type and it's a completely different beast. I can also create a dynamic by simply casting any type to dynamic like this:DynamicFoo fooExplicit = new DynamicFoo(); dynamic fooDynamic = fooExplicit; Note that dynamic typically doesn't require an explicit cast as the compiler automatically performs the cast so there's no need to use as dynamic. Dynamic functionality works at runtime and allows for the dynamic wrapper to look up and call members dynamically. A dynamic type will look for members to access or call in two places: Using the strongly typed members of the object Using theIDynamicMetaObjectProvider Interface methods to access members So rather than statically linking and calling a method or retrieving a property, the dynamic type looks up - at runtime  - where the value actually comes from. It's essentially late-binding which allows runtime determination what action to take when a member is accessed at runtime *if* the member you are accessing does not exist on the object. Class members are checked first before IDynamicMetaObjectProvider interface methods are kick in. All of the following works with the dynamic type:dynamic fooDynamic = new DynamicFoo(); // dynamic typing assignments fooDynamic.NewProperty = "Something new!"; fooDynamic.LastAccess = DateTime.Now; // dynamic assigning static properties fooDynamic.Bar = "dynamic barred"; fooDynamic.Entered = DateTime.Now; // echo back dynamic values Console.WriteLine(fooDynamic.NewProperty); Console.WriteLine(fooDynamic.LastAccess); Console.WriteLine(fooDynamic.Bar); Console.WriteLine(fooDynamic.Entered); The dynamic type can access the native class properties (Bar and Entered) and create and read new ones (NewProperty,LastAccess) all using a single type instance which is pretty cool. As you can see it's pretty easy to create an extensible type this way that can dynamically add members at runtime dynamically. The Alter Ego of IDynamicObject The key point here is that all three statements - explicit, var and dynamic - declare a new DynamicFoo(), but the dynamic declaration results in completely different behavior than the first two simply because the type has been cast to dynamic. Dynamic binding means that the type loses its typical strong typing, compile time features. You can see this easily in the Visual Studio code editor. As soon as you assign a value to a dynamic you lose Intellisense and you see which means there's no Intellisense and no compiler type checking on any members you apply to this instance. If you're new to the dynamic type it might seem really confusing that a single type can behave differently depending on how it is cast, but that's exactly what happens when you use a type that implements IDynamicMetaObjectProvider. Declare the type as its strong type name and you only get to access the native instance members of the type. Declare or cast it to dynamic and you get dynamic behavior which accesses native members plus it uses IDynamicMetaObjectProvider implementation to handle any missing member definitions by running custom code. You can easily cast objects back and forth between dynamic and the original type:dynamic fooDynamic = new DynamicFoo(); fooDynamic.NewProperty = "New Property Value"; DynamicFoo foo = fooDynamic; foo.Bar = "Barred"; Here the code starts out with a dynamic cast and a dynamic assignment. The code then casts back the value to the DynamicFoo. Notice that when casting from dynamic to DynamicFoo and back we typically do not have to specify the cast explicitly - the compiler can induce the type so I don't need to specify as dynamic or as DynamicFoo. Moral of the Story This easy interchange between dynamic and the underlying type is actually super useful, because it allows you to create extensible objects that can expose non-member data stores and expose them as an object interface. You can create an object that hosts a number of strongly typed properties and then cast the object to dynamic and add additional dynamic properties to the same type at runtime. You can easily switch back and forth between the strongly typed instance to access the well-known strongly typed properties and to dynamic for the dynamic properties added at runtime. Keep in mind that dynamic object access has quite a bit of overhead and is definitely slower than strongly typed binding, so if you're accessing the strongly typed parts of your objects you definitely want to use a strongly typed reference. Reserve dynamic for the dynamic members to optimize your code. The real beauty of dynamic is that with very little effort you can build expandable objects or objects that expose different data stores to an object interface. I'll have more on this in my next post when I create a customized and extensible Expando object based on DynamicObject.© Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Solaris 11 Launch Blog Carnival Roundup

  - by constant

  Solaris 11 is here! And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter go to eleven. Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure: Getting Started/Overview A lot of people speculated that the official launch of Solaris 11 would be on 11/11 (whatever way you want to turn it), but it actually happened two days earlier. Larry Wake himself offers 11 Reasons Why Oracle Solaris 11 11/11 Isn't Being Released on 11/11/11. Then, Larry goes on with a summary: Oracle Solaris 11: The First Cloud OS gives you a short and sweet rundown of what the major new features of Solaris 11 are. Jeff Victor has his own list of What's New in Oracle Solaris 11. A popular Solaris 11 meme is to write a blog post about 11 favourite features: Jim Laurent's 11 Reasons to Love Solaris 11, Darren Moffat's 11 Favourite Solaris 11 Features, Mike Gerdt's 11 of My Favourite Things! are just three examples of "11 Favourite Things..." type blog posts, I'm sure many more will follow... More official overview content for Solaris 11 is available from the Oracle Tech Network Solaris 11 Portal. Also, check out Rick Ramsey's blog post Solaris 11 Resources for System Administrators on the OTN Blog and his secret 5 Commands That Make Solaris Administration Easier post from the OTN Garage. (Automatic) Installation and the Image Packaging System (IPS) The brand new Image Packaging System (IPS) and the Automatic Installer (IPS), together with numerous other install/packaging/boot/patching features are among the most significant improvements in Solaris 11. But before installing, you may wonder whether Solaris 11 will support your particular set of hardware devices. Again, the OTN Garage comes to the rescue with Rick Ramsey's post How to Find Out Which Devices Are Supported By Solaris 11. Included is a useful guide to all the first steps to get your Solaris 11 system up and running. Tim Foster had a whole handful of blog posts lined up for the launch, teaching you everything you need to know about IPS but didn't dare to ask: The IPS System Repository, IPS Self-assembly - Part 1: Overlays and Part 2: Multiple Packages Delivering Configuration. Watch out for more IPS posts from Tim! If installing packages or upgrading your system from the net makes you uneasy, then you're not alone: Jim Laurent will tech you how Building a Solaris 11 Repository Without Network Connection will make your life easier. Many of you have already peeked into the future by installing Solaris 11 Express. If you're now wondering whether you can upgrade or whether a fresh install is necessary, then check out Alan Hargreaves's post Upgrading Solaris 11 Express b151a with support to Solaris 11. The trick is in upgrading your pkg(1M) first. Networking One of the first things to do after installing Solaris 11 (or any operating system for that matter), is to set it up for networking. Solaris 11 comes with the brand new "Network Auto-Magic" feature which can figure out everything by itself. For those cases where you want to exercise a little more control, Solaris 11 left a few people scratching their heads. Fortunately, Tschokko wrote up this cool blog post: Solaris 11 manual IPv4 & IPv6 configuration right after the launch ceremony. Thanks, Tschokko! And Milek points out a long awaited networking feature in Solaris 11 called Solaris 11 - hostmodel, which I know for a fact that many customers have looked forward to: How to "bind" a Solaris 11 system to a specific gateway for specific IP address it is using. Steffen Weiberle teaches us how to tune the Solaris 11 networking stack the proper way: ipadm(1M). No more fiddling with ndd(1M)! Check out his tutorial on Solaris 11 Network Tunables. And if you want to get even deeper into the networking stack, there's nothing better than DTrace. Alan Maguire teaches you in: DTracing TCP Congestion Control how to probe deeply into the Solaris 11 TCP/IP stack, the TCP congestion control part in particular. Don't miss his other DTrace and TCP related blog posts! DTrace And there we are: DTrace, the king of all observability tools. Long time DTrace veteran and co-author of The DTrace book*, Brendan Gregg blogged about Solaris 11 DTrace syscall provider changes. BTW, after you install Solaris 11, check out the DTrace toolkit which is installed by default in /usr/dtrace/DTT. It is chock full of handy DTrace scripts, many of which contributed by Brendan himself! Security Another big theme in Solaris 11, and one that is crucial for the success of any operating system in the Cloud is Security. Here are some notable posts in this category: Darren Moffat starts by showing us how to completely get rid of root: Completely Disabling Root Logins on Solaris 11. With no root user, there's one major entry point less to worry about. But that's only the start. In Immutable Zones on Encrypted ZFS, Darren shows us how to double the security of your services: First by locking them into the new Immutable Zones feature, then by encrypting their data using the new ZFS encryption feature. And if you're still missing sudo from your Linux days, Darren again has a solution: Password (PAM) caching for Solaris su - "a la sudo". If you're wondering how much compute power all this encryption will cost you, you're in luck: The Solaris X86 AESNI OpenSSL Engine will make sure you'll use your Intel's embedded crypto support to its fullest. And if you own a brand new SPARC T4 machine you're even luckier: It comes with its own SPARC T4 OpenSSL Engine. Dan Anderson's posts show how there really is now excuse not to encrypt any more... Developers Solaris 11 has a lot to offer to developers as well. Ali Bahrami has a series of blog posts that cover diverse developer topics: elffile: ELF Specific File Identification Utility, Using Stub Objects and The Stub Proto: Not Just For Stub Objects Anymore to name a few. BTW, if you're a developer and want to shape the future of Solaris 11, then Vijay Tatkar has a hint for you: Oracle (Sun Systems Group) is hiring! Desktop and Graphics Yes, Solaris 11 is a 100% server OS, but it can also offer a decent desktop environment, especially if you are a developer. Alan Coopersmith starts by discussing S11 X11: ye olde window system in today's new operating system, then Calum Benson shows us around What's new on the Solaris 11 Desktop. Even accessibility is a first-class citizen in the Solaris 11 user interface. Peter Korn celebrates: Accessible Oracle Solaris 11 - released! Performance Gone are the days of "Slowaris", when Solaris was among the few OSes that "did the right thing" while others cut corners just to win benchmarks. Today, Solaris continues doing the right thing, and it delivers the right performance at the same time. Need proof? Check out Brian's BestPerf blog with continuous updates from the benchmarking lab, including Recent Benchmarks Using Oracle Solaris 11! Send Me More Solaris 11 Launch Articles! These are just a few of the more interesting blog articles that came out around the Solaris 11 launch, I'm sure there are many more! Feel free to post a comment below if you find a particularly interesting blog post that hasn't been listed so far and share your enthusiasm for Solaris 11! *Affiliate link: Buy cool stuff and support this blog at no extra cost. We both win! var flattr_uid = '26528'; var flattr_tle = 'Solaris 11 Launch Blog Carnival Roundup'; var flattr_dsc = '<strong>Solaris 11 is here!</strong>And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter <a href="http://en.wikipedia.org/wiki/Up_to_eleven">go to eleven</a>.Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure:'; var flattr_tag = 'blogging,digest,Oracle,Solaris,solaris,solaris 11'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2011/11/solaris-11-launch-blog-carnival-roundup'; var flattr_lng = 'en_GB'

  Read the article

• Change or Reset Windows Password from a Ubuntu Live CD

  - by Trevor Bekolay

  If you can’t log in even after trying your twelve passwords, or you’ve inherited a computer complete with password-protected profiles, worry not – you don’t have to do a fresh install of Windows. We’ll show you how to change or reset your Windows password from a Ubuntu Live CD. This method works for all of the NT-based version of Windows – anything from Windows 2000 and later, basically. And yes, that includes Windows 7. You’ll need a Ubuntu 9.10 Live CD, or a bootable Ubuntu 9.10 Flash Drive. If you don’t have one, or have forgotten how to boot from the flash drive, check out our article on creating a bootable Ubuntu 9.10 flash drive. The program that lets us manipulate Windows passwords is called chntpw. The steps to install it are different in 32-bit and 64-bit versions of Ubuntu. Installation: 32-bit Open up Synaptic Package Manager by clicking on System at the top of the screen, expanding the Administration section, and clicking on Synaptic Package Manager. chntpw is found in the universe repository. Repositories are a way for Ubuntu to group software together so that users are able to choose if they want to use only completely open source software maintained by Ubuntu developers, or branch out and use software with different licenses and maintainers. To enable software from the universe repository, click on Settings > Repositories in the Synaptic window. Add a checkmark beside the box labeled “Community-maintained Open Source software (universe)” and then click close. When you change the repositories you are selecting software from, you have to reload the list of available software. In the main Synaptic window, click on the Reload button. The software lists will be downloaded. Once downloaded, Synaptic must rebuild its search index. The label over the text field by the Search button will read “Rebuilding search index.” When it reads “Quick search,” type chntpw in the text field. The package will show up in the list. Click on the checkbox near the chntpw name. Click on Mark for Installation. chntpw won’t actually be installed until you apply the changes you’ve made, so click on the Apply button in the Synaptic window now. You will be prompted to accept the changes. Click Apply. The changes should be applied quickly. When they’re done, click Close. chntpw is now installed! You can close Synaptic Package Manager. Skip to the section titled Using chntpw to reset your password. Installation: 64-bit The version of chntpw available in Ubuntu’s universe repository will not work properly on a 64-bit machine. Fortunately, a patched version exists in Debian’s Unstable branch, so let’s download it from there and install it manually. Open Firefox. Whether it’s your preferred browser or not, it’s very readily accessible in the Ubuntu Live CD environment, so it will be the easiest to use. There’s a shortcut to Firefox in the top panel. Navigate to http://packages.debian.org/sid/amd64/chntpw/download and download the latest version of chntpw for 64-bit machines. Note: In most cases it would be best to add the Debian Unstable branch to a package manager, but since the Live CD environment will revert to its original state once you reboot, it’ll be faster to just download the .deb file. Save the .deb file to the default location. You can close Firefox if desired. Open a terminal window by clicking on Applications at the top-left of the screen, expanding the Accessories folder, and clicking on Terminal. In the terminal window, enter the following text, hitting enter after each line: cd Downloadssudo dpkg –i chntpw* chntpw will now be installed. Using chntpw to reset your password Before running chntpw, you will have to mount the hard drive that contains your Windows installation. In most cases, Ubuntu 9.10 makes this simple. Click on Places at the top-left of the screen. If your Windows drive is easily identifiable – usually by its size – then left click on it. If it is not obvious, then click on Computer and check out each hard drive until you find the correct one. The correct hard drive will have the WINDOWS folder in it. When you find it, make a note of the drive’s label that appears in the menu bar of the file browser. If you don’t already have one open, start a terminal window by going to Applications > Accessories > Terminal. In the terminal window, enter the commands cd /medials pressing enter after each line. You should see one or more strings of text appear; one of those strings should correspond with the string that appeared in the title bar of the file browser earlier. Change to that directory by entering the command cd <hard drive label> Since the hard drive label will be very annoying to type in, you can use a shortcut by typing in the first few letters or numbers of the drive label (capitalization matters) and pressing the Tab key. It will automatically complete the rest of the string (if those first few letters or numbers are unique). We want to switch to a certain Windows directory. Enter the command: cd WINDOWS/system32/config/ Again, you can use tab-completion to speed up entering this command. To change or reset the administrator password, enter: sudo chntpw SAM SAM is the file that contains your Windows registry. You will see some text appear, including a list of all of the users on your system. At the bottom of the terminal window, you should see a prompt that begins with “User Edit Menu:” and offers four choices. We recommend that you clear the password to blank (you can always set a new password in Windows once you log in). To do this, enter “1” and then “y” to confirm. If you would like to change the password instead, enter “2”, then your desired password, and finally “y” to confirm. If you would like to reset or change the password of a user other than the administrator, enter: sudo chntpw –u <username> SAM From here, you can follow the same steps as before: enter “1” to reset the password to blank, or “2” to change it to a value you provide. And that’s it! Conclusion chntpw is a very useful utility provided for free by the open source community. It may make you think twice about how secure the Windows login system is, but knowing how to use chntpw can save your tail if your memory fails you two or eight times! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDChange Your Forgotten Windows Password with the Linux System Rescue CDHow to Create and Use a Password Reset Disk in Windows Vista & Windows 7Reset Your Forgotten Password the Easy Way Using the Ultimate Boot CD for WindowsHow to install Spotify in Ubuntu 9.10 using Wine TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox) New Firefox release 3.6.3 fixes 1 Critical bug Dark Side of the Moon (8-bit)

  Read the article

• Win a place at a SQL Server Masterclass with Kimberly Tripp and Paul Randal

  - by Testas

  The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!And you could be there courtesy of UK SQL Server User Group and SQL Server Magazine! This week the UK SQL Server User Group will provide you with details of how to win a place at this must see seminar   You can also register for the seminar yourself at:www.regonline.co.uk/kimtrippsql More information about the seminar   Where: Radisson Edwardian Heathrow Hotel, London When: Thursday 17th June 2010 This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance. The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:·         Debunk many of the ingrained misconceptions around SQL Server's behaviour   ·         Show you disaster recovery techniques critical to preserving your company's life-blood - the data   ·         Explain how a common application design pattern can wreak havoc in the database ·         Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Please Note: Agenda may be subject to changeSessions AbstractsKEYNOTE: Bridging the Gap Between Development and Production  Applications are commonly developed with little regard for how design choices will affect performance in production. This is often because developers don't realize the implications of their design on how SQL Server will be able to handle a high workload (e.g. blocking, fragmentation) and/or because there's no full-time trained DBA that can recognize production problems and help educate developers. The keynote sets the stage for the rest of the day. Discussing some of the issues that can arise, explaining how some can be avoided and highlighting some of the features in SQL 2008 that can help developers and DBAs make better use of SQL Server, and troubleshoot when things go wrong.  SESSION ONE: SQL Server MythbustersIt's amazing how many myths and misconceptions have sprung up and persisted over the years about SQL Server - after many years helping people out on forums, newsgroups, and customer engagements, Paul and Kimberly have heard it all. Are there really non-logged operations? Can interrupting shrinks or rebuilds cause corruption? Can you override the server's MAXDOP setting? Will the server always do a table-scan to get a row count? Many myths lead to poor design choices and inappropriate maintenance practices so these are just a few of many, many myths that Paul and Kimberly will debunk in this fast-paced session on how SQL Server operates and should be managed and maintained. SESSION TWO: Database Recovery Techniques Demo-Fest Even if a company has a disaster recovery strategy in place, they need to practice to make sure that the plan will work when a disaster does strike. In this fast-paced demo session Paul and Kimberly will repeatedly do nasty things to databases and then show how they are recovered - demonstrating many techniques that can be used in production for disaster recovery. Not for the faint-hearted! SESSION THREE: GUIDs: Use, Abuse, and How To Move Forward Since the addition of the GUID (Microsoft’s implementation of the UUID), my life as a consultant and "tuner" has been busy. I’ve seen databases designed with GUID keys run fairly well with small workloads but completely fall over and fail because they just cannot scale. And, I know why GUIDs are chosen - it simplifies the handling of parent/child rows in your batches so you can reduce round-trips or avoid dealing with identity values. And, yes, sometimes it's even for distributed databases and/or security that GUIDs are chosen. I'm not entirely against ever using a GUID but overusing and abusing GUIDs just has to be stopped! Please, please, please let me give you better solutions and explanations on how to deal with your parent/child rows, round-trips and clustering keys! SESSION 4: Essential Database MaintenanceIn this session, Paul and Kimberly will run you through their top-ten database maintenance recommendations, with a lot of tips and tricks along the way. These are distilled from almost 30 years combined experience working with SQL Server customers and are geared towards making your databases more performant, more available, and more easily managed (to save you time!). Everything in this session will be practical and applicable to a wide variety of databases. Topics covered include: backups, shrinks, fragmentation, statistics, and much more! Focus will be on 2005 but we'll explain some of the key differences for 2000 and 2008 as well.    Speaker Biographies     Paul S.Randal  Kimberley L. Tripp Paul and Kimberly are a husband-and-wife team who own and run SQLskills.com, a world-renowned SQL Server consulting and training company. They are both SQL Server MVPs and Microsoft Regional Directors, with over 30 years of combined experience on SQL Server. Paul worked on the SQL Server team for nine years in development and management roles, writing many of the DBCC commands, and ultimately with responsibility for core Storage Engine for SQL Server 2008. Paul writes extensively on his blog (SQLskills.com/blogs/Paul) and for TechNet Magazine, for which he is also a Contributing Editor. Kimberly worked on the SQL Server team in the early 1990s as a tester and writer before leaving to found SQLskills and embrace her passion for teaching and consulting. Kimberly has been a staple at worldwide conferences since she first presented at TechEd in 1996, and she blogs at SQLskills.com/blogs/Kimberly. They have written Microsoft whitepapers and books for SQL Server 2000, 2005 and 2008, and are regular, top-rated presenters worldwide on database maintenance, high availability, disaster recovery, performance tuning, and SQL Server internals. Together they teach the SQL MCM certification and throughout Microsoft.In their spare time, they like to find frogfish in remote corners of the world.  

  Read the article

• My nVidia GeForce 8600M GT card stopped working: "extension GLX missing on display 0:0"

  - by Wolter Hellmund

  So I turned on my computer and log into my gnome-shell session to find that the shell is gone, and there is instead a very thick panel with a vertically repeated pattern of the gradient the Unity panel displays. I ran some tests and found out that my graphic acceleration was failing. I have attached some outputs of some commands to help helpers help me: Some command outputs Video card: nVidia GeForce 8600M GT (note that it is not an Optimus card). Output of lspci | grep VGA: 01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600M GT] (rev a1) Output of glxinfo: Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Contents of /var/log/Xorg.0.log: NVIDIA: Failed to load the NVIDIA kernel module. Please check your NVIDIA: system's kernel log for additional error messages. UnloadModule: "nvidia" Unloading nvidia Failed to load module "nvidia" (module-specific error, 0) If I use the Aditional Drivers system application, I see none of the drivers active, and when I try to activate any, I get an error telling me to check the jockey.log file. The contents of /var/log/jockey.log are: 2012-09-20 23:11:32,690 DEBUG: NVidia(nvidia_173).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:32,690 DEBUG: nvidia_173 is not the alternative in use 2012-09-20 23:11:34,606 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: enabled, b43legacy: enabled 2012-09-20 23:11:34,657 DEBUG: NVidia(nvidia_173_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:34,657 DEBUG: nvidia_173_updates is not the alternative in use 2012-09-20 23:11:36,647 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:36,648 DEBUG: KMH enabled: False 2012-09-20 23:11:38,642 DEBUG: NVidia(nvidia_current_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:38,642 DEBUG: nvidia_current_updates is not the alternative in use 2012-09-20 23:11:40,546 DEBUG: NVidia(nvidia_173).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:40,546 DEBUG: nvidia_173 is not the alternative in use 2012-09-20 23:11:40,620 DEBUG: NVidia(nvidia_173).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:40,620 DEBUG: nvidia_173 is not the alternative in use 2012-09-20 23:11:40,629 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: enabled, b43legacy: enabled 2012-09-20 23:11:40,698 DEBUG: NVidia(nvidia_173_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:40,698 DEBUG: nvidia_173_updates is not the alternative in use 2012-09-20 23:11:40,759 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:40,760 DEBUG: KMH enabled: False 2012-09-20 23:11:40,826 DEBUG: NVidia(nvidia_current_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:40,826 DEBUG: nvidia_current_updates is not the alternative in use 2012-09-20 23:11:45,415 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:45,415 DEBUG: KMH enabled: False 2012-09-20 23:11:47,367 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:11:47,367 DEBUG: KMH enabled: False 2012-09-20 23:11:55,961 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-09-20 23:11:55,962 ERROR: XorgDriverHandler.enable(): package or module not installed, aborting 2012-09-20 23:12:27,780 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:27,781 DEBUG: KMH enabled: False 2012-09-20 23:12:27,840 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:27,840 DEBUG: KMH enabled: False 2012-09-20 23:12:43,196 DEBUG: NVidia(nvidia_173).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,197 DEBUG: nvidia_173 is not the alternative in use 2012-09-20 23:12:43,208 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: enabled, b43legacy: enabled 2012-09-20 23:12:43,269 DEBUG: NVidia(nvidia_173_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,269 DEBUG: nvidia_173_updates is not the alternative in use 2012-09-20 23:12:43,333 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,333 DEBUG: KMH enabled: False 2012-09-20 23:12:43,393 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,394 DEBUG: KMH enabled: False 2012-09-20 23:12:43,465 DEBUG: NVidia(nvidia_current_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,465 DEBUG: nvidia_current_updates is not the alternative in use 2012-09-20 23:12:43,531 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,531 DEBUG: KMH enabled: False 2012-09-20 23:12:43,587 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,587 DEBUG: KMH enabled: False 2012-09-20 23:12:43,663 DEBUG: NVidia(nvidia_173).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,663 DEBUG: nvidia_173 is not the alternative in use 2012-09-20 23:12:43,672 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: enabled, b43legacy: enabled 2012-09-20 23:12:43,738 DEBUG: NVidia(nvidia_173_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,739 DEBUG: nvidia_173_updates is not the alternative in use 2012-09-20 23:12:43,803 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,803 DEBUG: KMH enabled: False 2012-09-20 23:12:43,863 DEBUG: NVidia(nvidia_current).enabled(): target_alt /usr/lib/nvidia-current/ld.so.conf current_alt /usr/lib/nvidia-current/ld.so.conf other target alt /usr/lib/nvidia-current/alt_ld.so.conf other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,863 DEBUG: KMH enabled: False 2012-09-20 23:12:43,930 DEBUG: NVidia(nvidia_current_updates).enabled(): target_alt None current_alt /usr/lib/nvidia-current/ld.so.conf other target alt None other current alt /usr/lib/nvidia-current/alt_ld.so.conf 2012-09-20 23:12:43,930 DEBUG: nvidia_current_updates is not the alternative in use 2012-09-20 23:24:16,305 DEBUG: Shutting down Things I have tried Checked the video card on a Windows session. Reran nvidia-xconfig. Purged all nvidia software from my computer, and reinstall it. Run nvidia-xconfig. Tried a different kernel.

  Read the article

• bluetooth not working on Ubuntu 13.10

  - by iacopo

  I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

  Read the article

• Finding a person in the forest

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved finding a person in the forest or Limiting the AD result in SharePoint People Picker There are times when we need to limit the SharePoint audience of certain farms or servers or site collections to a particular audience. One of my experiences involved limiting access to US citizens, another to a particular location. Now, most of us – your humble servant included – are not Active Directory experts – but we must be able to handle the “audience restrictions” as required. So here is how it’s done in a nutshell. Important note. Not all could be done in PowerShell (at least not yet)! There are no Windows PowerShell commands to configure People Picker. The stsadm command is: stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv ADQuery –url http://somethingOrOther Note the long-hyphenated property name. Now to filling the ADQuery.   LDAP Query in a nutshell Syntax LDAP is no older than SQL and an LDAP query is actually a query against the LDAP Database. LDAP attributes are the equivalent of Database columns, so why do we have to learn a new query language? Beats me! But we must, so here it is. The syntax of an LDAP query string is made of individual statements with relational operators including: = Equal <= Lower than or equal >= Greater than or equal… and memberOf – a group membership. ! Not * Wildcard Equal and memberOf are the most commonly used. Checking for absence uses the ! – not and the * - wildcard Example: (SN=Grant) All whose last name – SurName – is Grant Example: (!(SN=Grant)) All except Grant Example: (!(SN=*)) all where there is no SurName i.e SurName is absent (probably Rappers). Example: (CN=MyGroup) Common Name is MyGroup.  Example: (GN=J*) all the Given Names that start with J (JJ, Jane, Jon, John, etc.) The cryptic SN, CN, GN, etc. are attributes and more about them later All the queries are enclosed in parentheses (Query). Complex queries are comprised of sets that are in AND or OR conditions. AND is denoted by the ampersand (&) and the OR is denoted by the vertical pipe (|). The general syntax is that of the Prefix polish notation where the operand precedes the variables. E.g +ab is the sum of a and b. In an LDAP query (&(A)(B)) will garner the objects for which both A and B are true. In an LDAP query (&(A)(B)(C)) will garner the objects for which A, B and C are true. There’s no limit to the number of conditions. In an LDAP query (|(A)(B)) will garner the objects for which either A or B are true. In an LDAP query (|(A)(B)(C)) will garner the objects for which at least one of A, B and C is true. There’s no limit to the number of conditions. More complex queries have both types of conditions and the parentheses determine the order of operations. Attributes Now let’s get into the SN, CN, GN, and other attributes of the query SN – is the SurName (last name) GN – is the Given Name (first name) CN – is the Common Name, usually GN followed by SN OU – is an Organization Unit such as division, department etc. DC – is a Domain Content in the AD forest l – lower case ‘L’ stands for location. Jerusalem anybody? Or Katmandu. UPN – User Principal Name, is usually the first part of an email address. By nature it is unique in the forest. Most systems set the UPN to be the first initial followed by the SN of the person involved. Some limit the total to 8 characters. If we have many ‘jsmith’ we have to somehow distinguish them from each other. DN – is the distinguished name – a name unique to AD forest in which it lives. Usually it’s a CN with some domain or group distinguishers. DN is important in conjunction with the memberOf relation. Groups have stricter requirement. Each group has to have a unique name - its CN and it has to be unique regardless of its place. See more below. All of the attributes are case insensitive. CN, cn, Cn, and cN are identical. objectCategory is an element that requires special consideration. AD contains many different object like computers, printers, and of course people and groups. In the queries below, we’re limiting our search to people (person). Putting it altogether Let’s get a list of all the Johns in the SPAdmin group of the Jerusalem that local domain. (&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local)) The memberOf=cn=SPAdmin uses the cn (Common Name) of the SPAdmin group. This is how the memberOf relation is used. ‘SPAdmin’ is actually the DN of the group. Also the memberOf relation does not allow wild cards (*) in the group name. Also, you are limited to at most one ‘OU’ entry. Let’s add Marvin Minsky to the search above. |(&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local))(CN=Marvin Minsky) Here I added the or pipeline at the beginning of the query and put the CN requirement for Minsky at the end. Note that if Marvin was already in the prior result, he’s not going to be listed twice. One last note: You may see a dryer but more complete list of attributes rules and examples in: http://www.tek-tips.com/faqs.cfm?fid=5667 And finally (thus negating the claim that my previous note was last), to the best of my knowledge there are 3 more ways to limit the audience. One is to use the peoplepicker-searchadcustomfilter property using the same ADQuery. This works only in SP1 and above. The second is to limit the search to users within this particular site collection – the property name is peoplepicker-onlysearchwithinsitecollection and the value is yes (-pv yes) And the third is –pn peoplepicker-serviceaccountdirectorypaths –pv “OU=ou1,DC=dc1…..” Again you are limited to at most one ‘OU’ phrase – no OU=ou1,OU=ou2… And now the real end. The main property discussed in this sprawling and seemingly endless monogram – peoplepicker-searchadcustomquery - is the most general way of getting the job done. Here are a few examples of command lines that worked and some that didn’t. Can you see why? C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (!Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,OU=OUMid,OU=OUTop,DC=TopDC,DC=MidDC,DC=BottomDC) Command line error. Too many OUs C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully.   That’s all folks!

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >