Search Results

Search found 6497 results on 260 pages for 'logon scripts'.

Page 198/260 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• Script Doesnt Run All the Way Through

  - by Chris

  I have a php script that should execute 2 for loops. Both take awhile to run. I have called ignore_user_abort(true) and set_time_limit(0). The interesting thing is, the first for loop completes, then the script dies without calling the next line of code. ignore_user_abort(true); set_time_limit(0); for($i=0; $i<10500; ++$i) { //do work } mail('[email protected]', 'First loop done', 'None'); for($j=0;$j<12500; ++$j) { //do work } mail('[email protected]', 'Second loop done', 'None'); The first loop will finish after about 20 minutes, but the mail function is never called, the script just ends. Any ideas why this might be happening other than a timeout (I have run other scripts for days on my current configuration)?

  Read the article

• APC on Windows makes server terminate connection

  - by vanneto

  Hello. I have a slight problem and cannot for the life of me figure out what is happening. I am running a Linux machine on a server with APC enabled. Everything works fine. Now when I enable APC on Windows the server starts terminating the connection. You know, the "Site currently unavailable" message Firefox spits out. I tried the access logs, error logs and there is nothing there to indicate an error. How could APC influence on a server like this? BTW: I have a CMS on my local server/live server. On the live server it works great with APC. On the dev server the connection terminates. The strange thing is, simpler scripts execute just fine. The CMS is using CakePHP. Any help would be very appreciated.

  Read the article

• do you need captcha validation in newsletter subscription?

  - by user354051

  I am using a custom captcha php script along with news letter scripts to let users subscribe using an email id. The method of registration is based on jQuery.post command. My question is that am I really safe If I remove the captcha validation from my subscription script. The subscription is simple. For example mydomain/[email protected] The subscribe.php is called along with email as parameter using jQuery.post command. I am new to web programming stuff and don't have much idea about spammers in conjunction with above scenario. Any advise would greatly be appreciated. Thanks

  Read the article

• Create set of random JPGs

  - by Kylar

  Here's the scenario, I want to create a set of random, small jpg's - anywhere between 50 bytes and 8k in size - the actual visual content of the jpeg is irrelevant as long as they're valid. I need to generate a thousand or so, and they all have to be unique - even if they're only different by a single pixel. Can I just write a jpeg header/footer and some random bytes in there? I'm not able to use existing photos or sets of photos from the web. The second issue is that the set of images has to be different for each run of the program. I'd prefer to do this in python, as the wrapping scripts are in Python. I've looked for python code to generate jpg's from scratch, and didn't find anything, so pointers to libraries are just as good.

  Read the article

• Why does LogonUser place user profiles in c:\users of the server?

  - by Lalit_M

  We have developed a ASP.NET web application and has implemented a custom authentication solution using active directory as the credentials store. Our front end application uses a normal login form to capture the user name and password and leverages the Win32 LogonUser method to authenticate the user’s credentials. When we are calling the LogonUser method, we are using the LOGON32_LOGON_NETWORK as the logon type. The issue we have found is that user profile folders are being created under the C:\Users folder of the web server. The folder seems to be created when a new user who has never logged on before is logging in for the first time. As the number of new users logging into the application grows, disk space is shrinking due to the large number of new user folders getting created. Has anyone seen this behavior with the Win32 LogonUser method? Does anyone know how to disable this behavior? I have tried LOGON32_LOGON_BATCH but it was giving an error 1385 in authentication user. I need either of the solution 1) Is there any way to stop the folder generation. 2) What parameter I need to pass this to work? Thanks

  Read the article

• How to migrate a codebase from one svn repo to another preserving history?

  - by chotchki

  I have a branch in a badly structured svn repo that needs to be stripped out and moved to another svn repository. (I'm trying to clean it up some). If I do an 'svn log' and not stop on copy/rename I can see all 3427 commits that I care about. Is there some way to dump the revisions out, short of writing some major scripts? I would follow the advice in this question but this branch has been moved all over the place and I would like to preserve the moves as well. Any ideas?

  Read the article

• beforeSave() returned some error

  - by kwokwai

  Hi all, I got a simple input text field in a HTML form: <input type="text" name="data[User][pswd]" id="data[User][pswd]"> The scripts for the Controller's action that captured the data is as follows: function register(){ $temp = $this->data; if(strlen($temp['User']['pswd'])>6) { if ($this->User->save($this->data)) { $this->Session->setFlash('Data was Saved'); } } } // this script works And in the Model controller, I got these lines of codes: function beforeSave() { $raw = $this->data; if(strlen($raw['User']['pswd'])>6){ md5($raw['User']['pswd']); } return true; } // this script failed to work The data was stored into the Database successfully but it was not undergone any MD5 encryption. I think that there must be some errors in the Model's script because I saw some errors flashed after the data was saved, but the screen that showed the errors immediately refreshed in a second after the data was saved successfully and I couldn't see the detail of the errors that caused the problem. Could you help me out please?

  Read the article

• How Can I Run a Regex that Tests Text for Characters in a Particular Alphabet or Script?

  - by Eli

  I'd like to make a regex in Perl that will test a string for a characters in a particular string. This would be something like: $text =~ .*P{'Chinese'}.* Is there a simple way of doing this, for English it's pretty easy by just testing for [a-zA-Z], but for a script like Chinese, or one of the Japanese scripts, I can't figure out any way of doing this short of writing out every character explicitly, which would make for some very ugly code. Ideas? I can't be the first/only person that's wanted to do this.

  Read the article

• WIN32 API question - Looking for answer asap

  - by Lalit_M

  We have developed a ASP.NET web application and has implemented a custom authentication solution using active directory as the credentials store. Our front end application uses a normal login form to capture the user name and password and leverages the Win32 LogonUser method to authenticate the user’s credentials. When we are calling the LogonUser method, we are using the LOGON32_LOGON_NETWORK as the logon type. The issue we have found is that user profile folders are being created under the C:\Users folder of the web server. The folder seems to be created when a new user who has never logged on before is logging in for the first time. As the number of new users logging into the application grows, disk space is shrinking due to the large number of new user folders getting created. Has anyone seen this behavior with the Win32 LogonUser method? Does anyone know how to disable this behavior? I have tried LOGON32_LOGON_BATCH but it was giving an error 1385 in authentication user. I need either of the solution 1) Is there any way to stop the folder generation. 2) What parameter I need to pass this to work? Thanks

  Read the article

• JSON + PHP + JQuery + Autocomplete problem...

  - by RohanCS

  Hi Everyone, Only started today but I'm having massive problems trying to understand JSON/AJAX etc, I've gotten my code this far but am stumped on how to return the data being pulled by the AJAX request to the jQuery Auto complete function. var autocomplete = new function (){ this.init = function() { $('#insurance_destination').autocomplete({source: lookup}); } function lookup(){ $.ajax({ url: "scripts/php/autocomplete.php", data: {query:this.term}, dataType: "json", cache : false, success: function(data) { for(key in data){ return { label: key, value: data[key][0] } } } }); } } And example of the JSON string being returned by a PHP script {"Uganda":["UGA","UK4","Worldwide excluding USA, Canada and the Carribbean"]}

  Read the article

• How can I handle validation of non-latin script input in PHP?

  - by Matt

  I am trying to adapt a php application to handle non-latin scripts (specifically: Japanese, simplified Chinese and Arabic). The app's data validation routines make frequent use of regular expressions to check input, but I am not sure how to adapt the \w character type to other languages without installing additional locales on the system (which I cannot rely on). Previous developers to have worked on the app have simply added needed characters to the regexes as the number of languages we supported grew (you frequently see "[\wÀÁÂÃÄÅÆÇÈÉ... etc" in the code), but I can't really do this for all the alphabets I need to support now. Does anybody out there have some advice on how to tackle this?

  Read the article

• php help hiding navigation with cookie

  - by user342391

  I have these tabs on my navigation: <li<?php if ($thisPage=="Customers") echo " class=\"current\""; ?>><a href="/customers/">Customers</a></li> <li<?php if ($thisPage=="Trunks") echo " class=\"current\""; ?>><a href="/trunks/">Trunks</a></li> <li<?php if ($thisPage=="Settings") echo " class=\"current\""; ?>><a href="/settings/">Settings</a></li> and I only want to show them when admin is logged in: if ($_COOKIE['custid'] == "admin") { echo "Customers"; echo "Trunks"; echo "Settings"; } How can I combine the two of these scripts???

  Read the article

• How to programatically set a permanent environment variable in Linux?

  - by Richard

  I am writing a little install script for some software. All it does is unpack a target tar, and then i want to permanently set some environment variables - principally the location of the unpacked libs and updating $PATH. Do I need to programmatically edit the .bashrc file, adding the appropriate entries to the end for example, or is there another way? What's standard practice? Edit: The package includes a number of run scripts (20+) that all use these named environment variables, so I need to set them somehow (the variable names have been chosen such that a collision is extremely unlikely)

  Read the article

• Are there any good Javascript/Jquery thumbnail script equivalents to TimThimb (PHP)?

  - by Mark

  For those unaware of TimThumb, it will take any image, of any size or dimension and create a thumbnail on the fly to any desired size. The beauty of it is that it really works on any dimension you feed it through a combination of either resizing the image, cropping or zoom cropping the image. Ive been searching for jscript equvalents but they either require the user to actually mask out the thumbs manually (looking for a script that automatically does it to images) or the scripts can't handle images in a different aspect ratio. Thanks for any leads on this!

  Read the article

• Language Prejudices

  - by paranoid_pedlar

  I've been researching programming languages, in hopes of learning to program. Since I've heard a lot of good things about Ruby, I went ahead and purchased The Pragmatic guide to Ruby. I understand that there is a lot of hype about Ruby on Rails. Because ruby lets you program scripts, applications, and internet helped me to decide on learning Ruby vs other languages. Today I watched a talk about google go, and it's really caught my attention. Coincidently I stumbled on a talk about jruby. I've been under the impression that java applications are bloated an slow. However the speaker made a point of what is wrong with Ruby, and how Jruby diagnosed Ruby's shortcomings. All that said. I would like to hear peoples opinions on Jruby vs Ruby, and if Ruby is working on fixing these "short comings". Also, how do you, the programming community feel about "go" and if I'm making a mistake learning Ruby instead of go, or Jruby. Appreciate your advice and opinions Thanks,

  Read the article

• convert char[] to String in btrace

  - by usovmv

  Hi folks! I'm profiling application with btrace (https://btrace.dev.java.net) and faced with limitation. I try to get a name of current java.lang.Thread. Normaly you can call getName() but it's forbidden in btrace-scripts (any calls exception BTraceUtils). Is there any idea how to get String from char[]. The original task is check if name of thread contains sub-string and only then log out tracing info (reducing output). thanks, Max.

  Read the article

• Why do dicts of defaultdict(int)'s use so much memory? (and other simple python performance question

  - by dukhat

  import numpy as num from collections import defaultdict topKeys = range(16384) keys = range(8192) table = dict((k,defaultdict(int)) for k in topKeys) dat = num.zeros((16384,8192), dtype="int32") print "looping begins" #how much memory should this use? I think it shouldn't use more that a few #times the memory required to hold (16384*8192) int32's (512 mb), but #it uses 11 GB! for k in topKeys: for j in keys: dat[k,j] = table[k][j] print "done" What is going on here? Furthermore, this similar script takes eons to run compared to the first one, and also uses an absurd quantity of memory. topKeys = range(16384) keys = range(8192) table = [(j,0) for k in topKeys for j in keys] I guess python ints might be 64 bit ints, which would account for some of this, but do these relatively natural and simple constructions really produce such a massive overhead? I guess these scripts show that they do, so my question is: what exactly is causing the high memory usage in the first script and the long runtime and high memory usage of the second script and is there any way to avoid these costs?

  Read the article

• Openvpn plugin openvpn-auth-ldap does not bind to Active Directory

  - by Selivanov Pavel

  I'm trying to configure OpenVPN with openvpn-auth-ldap plugin to authorize users via Active Directory LDAP. When I use the same server config without plugin option, and add client config with generated client key and cert, connection is successful, so problem is in the plugin. server.conf: plugin /usr/lib/openvpn/openvpn-auth-ldap.so "/etc/openvpn-test/openvpn-auth-ldap.conf" port 1194 proto tcp dev tun keepalive 10 60 topology subnet server 10.0.2.0 255.255.255.0 tls-server ca ca.crt dh dh1024.pem cert server.crt key server.key #crl-verify crl.pem persist-key persist-tun user nobody group nogroup verb 3 mute 20 openvpn-auth-ldap.conf: <LDAP> URL ldap://dc1.domain:389 TLSEnable no BindDN cn=bot_auth,cn=Users,dc=domain Password bot_auth Timeout 15 FollowReferrals yes </LDAP> <Authorization> BaseDN "cn=Users,dc=domain" SearchFilter "(sAMAccountName=%u)" RequireGroup false # <Group> # BaseDN "ou=groups,dc=mycompany,dc=local" # SearchFilter "(|(cn=developers)(cn=artists))" # MemberAttribute uniqueMember # </Group> </Authorization> Top-level domain in AD is used by historical reasons. Analogue configuration is working for Apache 2.2 in mod-authzn-ldap. User and password are correct. client.conf: remote server_name port 1194 proto tcp client pull remote-cert-tls server dev tun resolv-retry infinite nobind ca ca.crt ; with keys - works fine #cert test.crt #key test.key ; without keys - by password auth-user-pass persist-tun verb 3 mute 20 In server log there is string PLUGIN_INIT: POST /usr/lib/openvpn/openvpn-auth-ldap.so '[/usr/lib/openvpn/openvpn-auth-ldap.so] [/etc/openvpn-test/openvpn-auth-ldap.conf]' which indicates, that plugin failed. I can telnet to dc1.domain:389, so this is not network/firewall problem. Later server says TLS Error: TLS object -> incoming plaintext read error TLS handshake failed - without plugin it tryes to do usal key authentification. server log: Tue Nov 22 03:06:20 2011 OpenVPN 2.1.3 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Oct 21 2010 Tue Nov 22 03:06:20 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Nov 22 03:06:20 2011 PLUGIN_INIT: POST /usr/lib/openvpn/openvpn-auth-ldap.so '[/usr/lib/openvpn/openvpn-auth-ldap.so] [/etc/openvpn-test/openvpn-auth-ldap.conf]' intercepted=PLUGIN_AUTH_USER_PASS_VERIFY|PLUGIN_CLIENT_CONNECT|PLUGIN_CLIENT_DISCONNECT Tue Nov 22 03:06:20 2011 Diffie-Hellman initialized with 1024 bit key Tue Nov 22 03:06:20 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue Nov 22 03:06:20 2011 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Nov 22 03:06:20 2011 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:20 2011 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:20 2011 TLS-Auth MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:06:20 2011 Socket Buffers: R=[87380->131072] S=[16384->131072] Tue Nov 22 03:06:20 2011 TUN/TAP device tun1 opened Tue Nov 22 03:06:20 2011 TUN/TAP TX queue length set to 100 Tue Nov 22 03:06:20 2011 /sbin/ifconfig tun1 10.0.2.1 netmask 255.255.255.0 mtu 1500 broadcast 10.0.2.255 Tue Nov 22 03:06:20 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:06:20 2011 GID set to nogroup Tue Nov 22 03:06:20 2011 UID set to nobody Tue Nov 22 03:06:20 2011 Listening for incoming TCP connection on [undef] Tue Nov 22 03:06:20 2011 TCPv4_SERVER link local (bound): [undef] Tue Nov 22 03:06:20 2011 TCPv4_SERVER link remote: [undef] Tue Nov 22 03:06:20 2011 MULTI: multi_init called, r=256 v=256 Tue Nov 22 03:06:20 2011 IFCONFIG POOL: base=10.0.2.2 size=252 Tue Nov 22 03:06:20 2011 MULTI: TCP INIT maxclients=1024 maxevents=1028 Tue Nov 22 03:06:20 2011 Initialization Sequence Completed Tue Nov 22 03:07:10 2011 MULTI: multi_create_instance called Tue Nov 22 03:07:10 2011 Re-using SSL/TLS context Tue Nov 22 03:07:10 2011 Control Channel MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:07:10 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:07:10 2011 Local Options hash (VER=V4): 'c413e92e' Tue Nov 22 03:07:10 2011 Expected Remote Options hash (VER=V4): 'd8421bb0' Tue Nov 22 03:07:10 2011 TCP connection established with [AF_INET]10.0.0.9:47808 Tue Nov 22 03:07:10 2011 TCPv4_SERVER link local: [undef] Tue Nov 22 03:07:10 2011 TCPv4_SERVER link remote: [AF_INET]10.0.0.9:47808 Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS: Initial packet from [AF_INET]10.0.0.9:47808, sid=a2cd4052 84b47108 Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS_ERROR: BIO read tls_read_plaintext error: error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS Error: TLS object -> incoming plaintext read error Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS Error: TLS handshake failed Tue Nov 22 03:07:11 2011 10.0.0.9:47808 Fatal TLS error (check_tls_errors_co), restarting Tue Nov 22 03:07:11 2011 10.0.0.9:47808 SIGUSR1[soft,tls-error] received, client-instance restarting Tue Nov 22 03:07:11 2011 TCP/UDP: Closing socket client log: Tue Nov 22 03:06:18 2011 OpenVPN 2.1.3 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Oct 22 2010 Enter Auth Username:user Enter Auth Password: Tue Nov 22 03:06:25 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Nov 22 03:06:25 2011 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Nov 22 03:06:25 2011 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:25 2011 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:25 2011 Control Channel MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:06:25 2011 Socket Buffers: R=[87380->131072] S=[16384->131072] Tue Nov 22 03:06:25 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:06:25 2011 Local Options hash (VER=V4): 'd8421bb0' Tue Nov 22 03:06:25 2011 Expected Remote Options hash (VER=V4): 'c413e92e' Tue Nov 22 03:06:25 2011 Attempting to establish TCP connection with [AF_INET]10.0.0.2:1194 [nonblock] Tue Nov 22 03:06:26 2011 TCP connection established with [AF_INET]10.0.0.2:1194 Tue Nov 22 03:06:26 2011 TCPv4_CLIENT link local: [undef] Tue Nov 22 03:06:26 2011 TCPv4_CLIENT link remote: [AF_INET]10.0.0.2:1194 Tue Nov 22 03:06:26 2011 TLS: Initial packet from [AF_INET]10.0.0.2:1194, sid=7a3c2a0f bd35bca7 Tue Nov 22 03:06:26 2011 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Tue Nov 22 03:06:26 2011 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=Fort-Funston_CA/[email protected] Tue Nov 22 03:06:26 2011 Validating certificate key usage Tue Nov 22 03:06:26 2011 ++ Certificate has key usage 00a0, expects 00a0 Tue Nov 22 03:06:26 2011 VERIFY KU OK Tue Nov 22 03:06:26 2011 Validating certificate extended key usage Tue Nov 22 03:06:26 2011 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Tue Nov 22 03:06:26 2011 VERIFY EKU OK Tue Nov 22 03:06:26 2011 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=server/[email protected] Tue Nov 22 03:06:26 2011 Connection reset, restarting [0] Tue Nov 22 03:06:26 2011 TCP/UDP: Closing socket Tue Nov 22 03:06:26 2011 SIGUSR1[soft,connection-reset] received, process restarting Tue Nov 22 03:06:26 2011 Restart pause, 5 second(s) ^CTue Nov 22 03:06:27 2011 SIGINT[hard,init_instance] received, process exiting Does anybody know how to get openvpn-auth-ldap wirking?

  Read the article

• Sysprep and Capture task sequence failing using MDT 2010

  - by Nic Young

  I have created a Windows Deployment Services server in Windows 2008 R2. When I originally set it up I was able to successfully use MDT 2010 to create my boot images as well as creating task sequences that would sysprep and capture, and deploy my custom .wim files. Everything was working perfectly. About a month later I boot up my Windows 7 x86 image and run Windows updates to keep my image up to date. I then go and run my sysprep and capture task sequence and I get the following errors: I searched online for the cause of this error message and it just seems to be a generic permission denied type of error message. I then decided to completely rebuild my VM image from scratch and try again. I am still getting the same error messages as before. The following is what I have tried troubleshooting this issue: Troubleshooting: I have ensured that that UAC and the firewall is turned completely off when trying to capture the image. I have tried recreating the task sequence and making sure that the deployment share is updated. I have ensured that the local Administrator account is enabled and has the same password as specified in the task sequence. I have tried joining the computer to the domain and running the task sequence and I get a different error: I have attempted to run the script from the command prompt with "Run as Administrator" and I still receive the same errors above. For testing purposes I have ensured that Everyone has read/write access to my deployment share. I have spent days on trying to resolve this to no avail. Any ideas? EDIT: Below is the log info from C:\Windows\Deploymentlogs\BDD.log as requested. <![LOG[LTI Windows PE applied successfully]LOG]!><time="11:48:34.000+000" date="07-25-2012" component="LTIApply" context="" type="1" thread="" file="LTIApply"> <![LOG[LTIApply processing completed successfully.]LOG]!><time="11:48:34.000+000" date="07-25-2012" component="LTIApply" context="" type="1" thread="" file="LTIApply"> <![LOG[Microsoft Deployment Toolkit version: 6.0.2223.0]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[The task sequencer log is located at C:\Users\nicy\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Processing drivers for an X86 operating system.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[TargetOS is the current SystemDrive]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Property DriverCleanup is now = DONE]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Compare Image processor Type with Original [X86] = [X86].]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Prepare machine for Sysprep.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[No driver actions can be taken for OS Images installed from *.wim files.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[ZTIDrivers processing completed successfully.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Command completed, return code = -2147467259]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Property RetVal is now = -2147467259]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Unable to copy log to the network as no SLShare value was specified.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[CleanStartItems Complete]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Unregistering TSCore.dll.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[About to run command: wscript.exe "\\server\deploymentshare$\Scripts\LTICleanup.wsf"]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Microsoft Deployment Toolkit version: 6.0.2223.0]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Logs contained 7 errors and 0 warnings.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Checking mapped network drive.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[testing drive Z: mapped to \\server\deploymentshare$]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Disconnecting drive Z: mapped to \\server\deploymentshare$]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

  Read the article

• IIS 7.5 FTPS external access - 534 Policy requires SSL

  - by markmnl

  I have setup a FTP site that requires SSL but when I try connect to it externally I get the error: 220 Microsoft FTP Service 534 Policy requires SSL. I know - I set it so! Why doesnt it fetch the SSL cert from the site and allow me to logon?! (Incidentally beware of all the tutorials that Allow but do not Require SSL - while that will solve the problem it will be because SSL is not being used!). I suspect it may be I need a client that supports FTPS (FTP over SSL) and Windows explorer just uses IE which does not. But trying FileZilla and WinSCP I get a little further but then it hangs on TLS/SSL negotiation expecting a response from the server.... UPDATE: I have tried (from: http://learn.iis.net/page.aspx/309/configuring-ftp-firewall-settings/): Configure the Passive Port Range for the FTP Service. Configure the external IPv4 Address for a Specific FTP Site. Configure the firewall to allow the FTP service to listen on all ports that it opens. Disabling stateful FTP filtering so that Windows Firewall will not block FTP traffic. And still I get (in FileZilla trying both Active and Passive): Status: Connecting to 203.x.x.x:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Response: 234 AUTH command ok. Expecting TLS Negotiation. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server The Windows firewall logs unhelpfully have nothing to say.. UPDATE2: Turning the firewall off does not resolve the problem. I cannot believe how difficult it is to get something so simple to work and even once following the documentation it does not work. UPDATE3: Running FileZilla locally connecting through the loopback works in Active mode, in Passive mode I get up to: Command: LIST Response: 150 Opening BINARY mode data connection. Error: GnuTLS error -53: Error in the push function. Turning the firewall off at both ends I can still not connect the client and get the same error as above.

  Read the article

• openvpn: after changing to server mode, client does not create TUN device

  - by lurscher

  i had a previously working configuration with the config files used in a previous question However, i've changed this now to the following configuration using server mode, everything on the logs seem fine, however the client doesn't create any tun interface, so i don't have anything to connect to, presumably, i need to add or push some route commands, but i don't have any idea at this point what i need to do. I am posting all my relevant configuration files server.conf: dev tun server 10.8.117.0 255.255.255.0 ifconfig-pool-persist ipp.txt tls-server dh /home/lurscher/keys/dh1024.pem ca /home/lurscher/keys/ca.crt cert /home/lurscher/keys/vpnCh8TestServer.crt key /home/lurscher/keys/vpnCh8TestServer.key status openvpn-status.log log openvpn.log comp-lzo verb 3 and client.conf: dev tun remote my.server.com tls-client ca /home/chuckq/keys/ca.crt cert /home/chuckq/keys/vpnCh8TestClient.crt key /home/chuckq/keys/vpnCh8TestClient.key ns-cert-type server ; port 1194 ; user nobody ; group nogroup status openvpn-status.log log openvpn.log comp-lzo verb 3 the server ifconfig shows a tun device: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.117.1 P-t-P:10.8.117.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) However the client ifconfig does not show any tun interface! $ ifconfig tun0 tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) the client log says: Tue May 17 23:27:09 2011 OpenVPN 2.1.0 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 Tue May 17 23:27:09 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue May 17 23:27:09 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Tue May 17 23:27:09 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue May 17 23:27:09 2011 LZO compression initialized Tue May 17 23:27:09 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:27:09 2011 TUN/TAP device tun0 opened Tue May 17 23:27:09 2011 TUN/TAP TX queue length set to 100 Tue May 17 23:27:09 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:27:09 2011 Local Options hash (VER=V4): '41690919' Tue May 17 23:27:09 2011 Expected Remote Options hash (VER=V4): '530fdded' Tue May 17 23:27:09 2011 Socket Buffers: R=[114688->131072] S=[114688->131072] Tue May 17 23:27:09 2011 UDPv4 link local (bound): [undef] Tue May 17 23:27:09 2011 UDPv4 link remote: [AF_INET]192.168.0.101:1194 Tue May 17 23:27:09 2011 TLS: Initial packet from [AF_INET]192.168.0.101:1194, sid=8e8bdc33 f4275407 Tue May 17 23:27:09 2011 VERIFY OK: depth=1, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:09 2011 VERIFY OK: nsCertType=SERVER Tue May 17 23:27:09 2011 VERIFY OK: depth=0, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=vpnCh8TestServer/name=lurscher/[email protected] Tue May 17 23:27:09 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:09 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:09 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:09 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:09 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue May 17 23:27:09 2011 [vpnCh8TestServer] Peer Connection Initiated with [AF_INET]192.168.0.101:1194 Tue May 17 23:27:10 2011 Initialization Sequence Completed the client status log: OpenVPN STATISTICS Updated,Tue May 17 23:30:09 2011 TUN/TAP read bytes,0 TUN/TAP write bytes,0 TCP/UDP read bytes,5604 TCP/UDP write bytes,4244 Auth read bytes,0 pre-compress bytes,0 post-compress bytes,0 pre-decompress bytes,0 post-decompress bytes,0 END and the server log says: Tue May 17 23:18:25 2011 OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 Tue May 17 23:18:25 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue May 17 23:18:25 2011 WARNING: --keepalive option is missing from server config Tue May 17 23:18:25 2011 NOTE: your local LAN uses the extremely common subnet address 192.168.0.x or 192.168.1.x. Be aware that this might create routing conflicts if you connect to the VPN server from public locations such as internet cafes that use the same subnet. Tue May 17 23:18:25 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Tue May 17 23:18:25 2011 Diffie-Hellman initialized with 1024 bit key Tue May 17 23:18:25 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue May 17 23:18:25 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:18:25 2011 ROUTE default_gateway=192.168.0.1 Tue May 17 23:18:25 2011 TUN/TAP device tun0 opened Tue May 17 23:18:25 2011 TUN/TAP TX queue length set to 100 Tue May 17 23:18:25 2011 /sbin/ifconfig tun0 10.8.117.1 pointopoint 10.8.117.2 mtu 1500 Tue May 17 23:18:25 2011 /sbin/route add -net 10.8.117.0 netmask 255.255.255.0 gw 10.8.117.2 Tue May 17 23:18:25 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:18:25 2011 Socket Buffers: R=[126976->131072] S=[126976->131072] Tue May 17 23:18:25 2011 UDPv4 link local (bound): [undef] Tue May 17 23:18:25 2011 UDPv4 link remote: [undef] Tue May 17 23:18:25 2011 MULTI: multi_init called, r=256 v=256 Tue May 17 23:18:25 2011 IFCONFIG POOL: base=10.8.117.4 size=62 Tue May 17 23:18:25 2011 IFCONFIG POOL LIST Tue May 17 23:18:25 2011 vpnCh8TestClient,10.8.117.4 Tue May 17 23:18:25 2011 Initialization Sequence Completed Tue May 17 23:27:22 2011 MULTI: multi_create_instance called Tue May 17 23:27:22 2011 192.168.0.104:1194 Re-using SSL/TLS context Tue May 17 23:27:22 2011 192.168.0.104:1194 LZO compression initialized Tue May 17 23:27:22 2011 192.168.0.104:1194 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:27:22 2011 192.168.0.104:1194 Local Options hash (VER=V4): '530fdded' Tue May 17 23:27:22 2011 192.168.0.104:1194 Expected Remote Options hash (VER=V4): '41690919' Tue May 17 23:27:22 2011 192.168.0.104:1194 TLS: Initial packet from [AF_INET]192.168.0.104:1194, sid=8972b565 79323f68 Tue May 17 23:27:22 2011 192.168.0.104:1194 VERIFY OK: depth=1, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:22 2011 192.168.0.104:1194 VERIFY OK: depth=0, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:22 2011 192.168.0.104:1194 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue May 17 23:27:22 2011 192.168.0.104:1194 [vpnCh8TestClient] Peer Connection Initiated with [AF_INET]192.168.0.104:1194 Tue May 17 23:27:22 2011 vpnCh8TestClient/192.168.0.104:1194 MULTI: Learn: 10.8.117.6 -> vpnCh8TestClient/192.168.0.104:1194 Tue May 17 23:27:22 2011 vpnCh8TestClient/192.168.0.104:1194 MULTI: primary virtual IP for vpnCh8TestClient/192.168.0.104:1194: 10.8.117.6 finally, the server status log: OpenVPN CLIENT LIST Updated,Tue May 17 23:36:25 2011 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since vpnCh8TestClient,192.168.0.104:1194,4244,5604,Tue May 17 23:27:22 2011 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.117.6,vpnCh8TestClient,192.168.0.104:1194,Tue May 17 23:27:22 2011 GLOBAL STATS Max bcast/mcast queue length,0 END

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• Varnish "FetchError no backend connection" error

  - by clueless-anon

  Varnishlog: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829925 1.0 12 SessionOpen c 79.124.74.11 3063 :80 12 SessionClose c EOF 12 StatSess c 79.124.74.11 3063 0 1 0 0 0 0 0 0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829928 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829931 1.0 12 SessionOpen c 108.62.115.226 46211 :80 12 ReqStart c 108.62.115.226 46211 467185881 12 RxRequest c GET 12 RxURL c / 12 RxProtocol c HTTP/1.0 12 RxHeader c User-Agent: Pingdom.com_bot_version_1.4_(http://www.pingdom.com/) 12 RxHeader c Host: www.mysite.com 12 VCL_call c recv lookup 12 VCL_call c hash 12 Hash c / 12 Hash c www.mysite.com 12 VCL_return c hash 12 VCL_call c miss fetch 12 FetchError c no backend connection 12 VCL_call c error deliver 12 VCL_call c deliver deliver 12 TxProtocol c HTTP/1.1 12 TxStatus c 503 12 TxResponse c Service Unavailable 12 TxHeader c Server: Varnish 12 TxHeader c Content-Type: text/html; charset=utf-8 12 TxHeader c Retry-After: 5 12 TxHeader c Content-Length: 418 12 TxHeader c Accept-Ranges: bytes 12 TxHeader c Date: Wed, 27 Jun 2012 20:45:31 GMT 12 TxHeader c X-Varnish: 467185881 12 TxHeader c Age: 1 12 TxHeader c Via: 1.1 varnish 12 TxHeader c Connection: close 12 Length c 418 12 ReqEnd c 467185881 1340829931.192433119 1340829931.891024113 0.000051022 0.698516846 0.000074035 12 SessionClose c error 12 StatSess c 108.62.115.226 46211 1 1 1 0 0 0 256 418 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829934 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829937 1.0 netstat -tlnp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3086/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1915/varnishd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1279/sshd tcp 0 0 127.0.0.2:25 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:6082 0.0.0.0:* LISTEN 1914/varnishd tcp 0 0 127.0.0.2:9000 0.0.0.0:* LISTEN 1317/php-fpm.conf) tcp 0 0 127.0.0.2:3306 0.0.0.0:* LISTEN 1192/mysqld tcp 0 0 127.0.0.2:587 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:11211 0.0.0.0:* LISTEN 3072/memcached tcp6 0 0 :::8080 :::* LISTEN 3086/nginx tcp6 0 0 :::80 :::* LISTEN 1915/varnishd tcp6 0 0 :::22 :::* LISTEN 1279/sshd /etc/nginx/site-enabled/default server { listen 8080; ## listen for ipv4; this line is default and implied listen [::]:8080 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.html index.htm index.php; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; } location /doc { root /usr/share; autoindex on; allow 127.0.0.2; deny all; } location /images { root /usr/share; autoindex off; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.2:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } /etc/nginx/sites-enabled/www.mysite.com.vhost server { listen 8080; server_name www.mysite.com mysite.com.net; root /var/www/www.mysite.com/web; if ($http_host != "www.mysite.com") { rewrite ^ http://www.mysite.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } location / { try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; location ~* \.(jpg|jpeg|png|gif|css|js|ico)$ { expires max; log_not_found off; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.2:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } include /var/www/www.mysite.com/web/nginx.conf; location ~ /nginx.conf { deny all; access_log off; log_not_found off; } } /etc/varnish/default.vcl # This is a basic VCL configuration file for varnish. See the vcl(7) # man page for details on VCL syntax and semantics. # # Default backend definition. Set this to point to your content # server. # backend default { .host = "127.0.0.2"; .port = "8080"; # .connect_timeout = 600s; #.first_byte_timeout = 600s; # .between_bytes_timeout = 600s; # .max_connections = 800; Note: uncommenting the last four options at default.vcl made no difference. cat /etc/default/varnish # Configuration file for varnish # # /etc/init.d/varnish expects the variables $DAEMON_OPTS, $NFILES and $MEMLOCK # to be set from this shell script fragment. # # Should we start varnishd at boot? Set to "yes" to enable. START=yes # Maximum number of open files (for ulimit -n) NFILES=131072 # Maximum locked memory size (for ulimit -l) # Used for locking the shared memory log in memory. If you increase log size, # you need to increase this number as well MEMLOCK=82000 # Default varnish instance name is the local nodename. Can be overridden with # the -n switch, to have more instances on a single server. INSTANCE=$(uname -n) # This file contains 4 alternatives, please use only one. ## Alternative 1, Minimal configuration, no VCL # # Listen on port 6081, administration on localhost:6082, and forward to # content server on localhost:8080. Use a 1GB fixed-size cache file. # # DAEMON_OPTS="-a :6081 \ # -T localhost:6082 \ # -b localhost:8080 \ # -u varnish -g varnish \ # -S /etc/varnish/secret \ # -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" ## Alternative 2, Configuration with VCL # # Listen on port 6081, administration on localhost:6082, and forward to # one content server selected by the vcl file, based on the request. Use a 1GB # fixed-size cache file. # DAEMON_OPTS="-a :80 \ -T 127.0.0.2:6082 \ -f /etc/varnish/default.vcl \ -S /etc/varnish/secret \ -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" If you need any other info let me know. I am all out of clue as to whats the problem.

  Read the article

• pasenger does not start puppet master under nginx

  - by Anadi Misra

  On the server [root@bangvmpllDA02 logs]# ruby -v ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux] [root@bangvmpllDA02 logs]# puppet --version 3.0.1 and [root@bangvmpllDA02 logs]# service nginx configtest nginx: the configuration file /apps/nginx/nginx.conf syntax is ok nginx: configuration file /apps/nginx/nginx.conf test is successful [root@bangvmpllDA02 logs]# service nginx status nginx (pid 25923 25921 25920 25917 25908) is running... [root@bangvmpllDA02 logs]# however none of my agents are able to connect to the master, they all fail with errors like so [amisr1@blramisr195602 ~]$ puppet agent --test --verbose --server bangvmpllda02.XXX.com Info: Creating a new SSL certificate request for blramisr195602.XXX.com Info: Certificate Request fingerprint (SHA256): 26:EB:08:1F:82:32:E4:03:7A:64:8E:30:A3:99:93:26:E6:66:B9:B0:49:B6:08:F9:67:CA:1B:0C:00:B9:1D:41 Error: Could not request certificate: Error 405 on SERVER: <html> <head><title>405 Not Allowed</title></head> <body bgcolor="white"> <center><h1>405 Not Allowed</h1></center> <hr><center>nginx</center> </body> </html> Exiting; failed to retrieve certificate and waitforcert is disabled when I check logs on puppet master [root@bangvmpllDA02 logs]# tail puppet_access.log [05/Dec/2012:17:45:18 +0530] "GET /production/certificate/ca? HTTP/1.1" 404 162 "-" "Ruby" [05/Dec/2012:18:32:23 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" and the error logs show that nginx is not really able to process the request well 2012/12/05 18:33:33 [error] 25920#0: *23 open() "/etc/puppet/rack/public/production/certificate/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:33:33 [error] 25920#0: *24 open() "/etc/puppet/rack/public/production/certificate_request/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *27 open() "/etc/puppet/rack/public/production/certificate/ca" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate/ca? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *28 open() "/etc/puppet/rack/public/production/certificate_request/blramisr195602.XXX.com" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate_request/blramisr195602.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" Passenger does not show any application groups either [root@bangvmpllDA02 nginx]# passenger-status ----------- General information ----------- max = 15 count = 0 active = 0 inactive = 0 Waiting on global queue: 0 ----------- Application groups ----------- [root@bangvmpllDA02 nginx]# here's my nginx configuration [root@bangvmpllDA02 logs]# cat ../nginx.conf user puppet; worker_processes 4; #error_log logs/error.log; #error_log logs/error.log notice; error_log logs/error.log info; #pid logs/nginx.pid; events { use epoll; worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; server_tokens off; #keepalive_timeout 0; keepalive_timeout 120; gzip on; gzip_http_version 1.1; gzip_disable "msie6"; gzip_vary on; gzip_min_length 1100; gzip_buffers 64 8k; gzip_comp_level 3; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml; server { listen 80; server_name bangvmpllda02.XXXX.com; charset utf-8; #access_log logs/http.access.log main; location / { root html; index index.html index.htm index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { access_log off; log_not_found off; deny all; } location ~* \.(jpg|jpeg|gif|png|css|js|ico|xml)$ { access_log off; log_not_found off; expires 2d; } } # Passenger needed for puppet passenger_root /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18; passenger_ruby /usr/bin/ruby; passenger_max_pool_size 15; server { ssl on; listen 8140 default ssl; server_name bangvmpllda02.XXXX.com; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /etc/puppet/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } } and the puppet.conf [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet dns_alt_names = devops.XXXX.com,devops confdir = /etc/puppet vardir = /var/lib/puppet storeconfigs = true storeconfigs_backend = puppetdb thin_storeconfigs = false async_storeconfigs = false ssl_client_header = SSL_CLIENT_S_D ssl_client_verify_header = SSL_CLIENT_VERIFY # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl any ideas where am I going wrong? I checkthe directory permissions; /usr/share/puppet, /etc/puppet and /var/lib/puppet (and files inside them) are owned by puppet user.

  Read the article

• solved: passenger(mod_rails) fails to start puppet master under nginx

  - by Anadi Misra

  On the server [root@bangvmpllDA02 logs]# ruby -v ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux] [root@bangvmpllDA02 logs]# puppet --version 3.0.1 and [root@bangvmpllDA02 logs]# service nginx configtest nginx: the configuration file /apps/nginx/nginx.conf syntax is ok nginx: configuration file /apps/nginx/nginx.conf test is successful [root@bangvmpllDA02 logs]# service nginx status nginx (pid 25923 25921 25920 25917 25908) is running... [root@bangvmpllDA02 logs]# however none of my agents are able to connect to the master, they all fail with errors like so [amisr1@blramisr195602 ~]$ puppet agent --test --verbose --server bangvmpllda02.XXX.com Info: Creating a new SSL certificate request for blramisr195602.XXX.com Info: Certificate Request fingerprint (SHA256): 26:EB:08:1F:82:32:E4:03:7A:64:8E:30:A3:99:93:26:E6:66:B9:B0:49:B6:08:F9:67:CA:1B:0C:00:B9:1D:41 Error: Could not request certificate: Error 405 on SERVER: <html> <head><title>405 Not Allowed</title></head> <body bgcolor="white"> <center><h1>405 Not Allowed</h1></center> <hr><center>nginx</center> </body> </html> Exiting; failed to retrieve certificate and waitforcert is disabled when I check logs on puppet master [root@bangvmpllDA02 logs]# tail puppet_access.log [05/Dec/2012:17:45:18 +0530] "GET /production/certificate/ca? HTTP/1.1" 404 162 "-" "Ruby" [05/Dec/2012:18:32:23 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" and the error logs show that nginx is not really able to process the request well 2012/12/05 18:33:33 [error] 25920#0: *23 open() "/etc/puppet/rack/public/production/certificate/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:33:33 [error] 25920#0: *24 open() "/etc/puppet/rack/public/production/certificate_request/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *27 open() "/etc/puppet/rack/public/production/certificate/ca" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate/ca? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *28 open() "/etc/puppet/rack/public/production/certificate_request/blramisr195602.XXX.com" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate_request/blramisr195602.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" Passenger does not show any application groups either [root@bangvmpllDA02 nginx]# passenger-status ----------- General information ----------- max = 15 count = 0 active = 0 inactive = 0 Waiting on global queue: 0 ----------- Application groups ----------- [root@bangvmpllDA02 nginx]# here's my nginx configuration [root@bangvmpllDA02 logs]# cat ../nginx.conf user puppet; worker_processes 4; #error_log logs/error.log; #error_log logs/error.log notice; error_log logs/error.log info; #pid logs/nginx.pid; events { use epoll; worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; server_tokens off; #keepalive_timeout 0; keepalive_timeout 120; gzip on; gzip_http_version 1.1; gzip_disable "msie6"; gzip_vary on; gzip_min_length 1100; gzip_buffers 64 8k; gzip_comp_level 3; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml; server { listen 80; server_name bangvmpllda02.XXXX.com; charset utf-8; #access_log logs/http.access.log main; location / { root html; index index.html index.htm index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { access_log off; log_not_found off; deny all; } location ~* \.(jpg|jpeg|gif|png|css|js|ico|xml)$ { access_log off; log_not_found off; expires 2d; } } # Passenger needed for puppet passenger_root /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18; passenger_ruby /usr/bin/ruby; passenger_max_pool_size 15; server { ssl on; listen 8140 default ssl; server_name bangvmpllda02.XXXX.com; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /etc/puppet/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } } and the puppet.conf [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet dns_alt_names = devops.XXXX.com,devops confdir = /etc/puppet vardir = /var/lib/puppet storeconfigs = true storeconfigs_backend = puppetdb thin_storeconfigs = false async_storeconfigs = false ssl_client_header = SSL_CLIENT_S_D ssl_client_verify_header = SSL_CLIENT_VERIFY # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl any ideas where am I going wrong? I checkthe directory permissions; /usr/share/puppet, /etc/puppet and /var/lib/puppet (and files inside them) are owned by puppet user. Solved The simple solution to my complicated problem was that I had placed the config.ru in wrong place moved it to /etc/puppet/rack , it was in /etc/puppet/rack/public Well!!! :-/

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >