Search Results

Search found 16336 results on 654 pages for 'device admin'.

Page 199/654 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• Reusing slot numbers in Linux software RAID arrays

  - by thkala

  When a hard disk drive in one of my Linux machines failed, I took the opportunity to migrate from RAID5 to a 6-disk software RAID6 array. At the time of the migration I did not have all 6 drives - more specifically the fourth and fifth (slots 3 and 4) drives were already in use in the originating array, so I created the RAID6 array with a couple of missing devices. I now need to add those drives in those empty slots. Using mdadm --add does result in a proper RAID6 configuration, with one glitch - the new drives are placed in new slots, which results in this /proc/mdstat snippet: ... md0 : active raid6 sde1[7] sdd1[6] sda1[0] sdf1[5] sdc1[2] sdb1[1] 25185536 blocks super 1.0 level 6, 64k chunk, algorithm 2 [6/6] [UUUUUU] ... mdadm -E verifies that the actual slot numbers in the device superblocks are correct, yet the numbers shown in /proc/mdstat are still weird. I would like to fix this glitch, both to satisfy my inner perfectionist and to avoid any potential sources of future confusion in a crisis. Is there a way to specify which slot a new device should occupy in a RAID array? UPDATE: I have verified that the slot number persists in the component device superblock. For the version 1.0 superblocks that I am using that would be the dev_number field as defined in include/linux/raid/md_p.h of the Linux kernel source. I am now considering direct modification of said field to change the slot number - I don't suppose there is some standard way to manipulate the RAID superblock?

  Read the article

• How can I pair two bluetooth dongles together?

  - by techaddict

  I want to hack a device which connects via USB, and plug a bluetooth USB dongle to the end of the USB cable (using a female to female adapter), and then connect to that device from another USB bluetooth dongle connected to my computer. How can I do this? It is straightforward? I don't want to spend $30 before I know how to do this. Also I think another concern is that the USB cable is providing power to the device. So I think that means I would also have to hack it for power. I have created this diagram in Photoshop to illustrate my intent: (NOTE: it won't be a USB mouse, as that would be pointless because there are already wireless mice in existence. The mouse is displayed for illustrative purposes) Don't tell me "it won't work". Because I KNOW it WILL work. Think for example, PS3 controller. That works, and in fact I was able to get it working with my laptop, over bluetooth. I just want to know HOW to make it work.

  Read the article

• Creating a partitioned raid1 array for booting a debian squeeze system

  - by gucki

  I'd like to have the following raid1 (mirror) setup: /dev/md0 consists of /dev/sda and /dev/sdb I created this raid1 device using mdadm --create --verbose /dev/md0 --auto=yes --level=1 --raid-devices=2 /dev/sda /dev/sdb This gave a warning about metadata being 1.2 and my system might not boot. I cannot use 0.9 because it restricts the size of the raid to 2TB and I assume grub shipped with latest debian (squeeze) should be able to handle metadata 1.2. So then I created the needed partitions like this: # creating new label (partition table) parted -s /dev/md0 mklabel 'msdos' # creating partitions sfdisk -uM /dev/md0 << EOF 0,4096 ,1024,S ; EOF # making root filesystem mkfs -t ext4 -L boot -m 0 /dev/md0p1 # making swap filesystem mkswap /dev/md0p2 # making data filesystem mkfs -t ext4 -L data /dev/md0p3 Then I mounted the root partition, copied a minimal debian install inside and temporary mounted /dev /proc /sys. Afer this I chrooted to the new root folder and executed: grub-install --no-floppy --recheck /dev/md0 However this fails badly with: /usr/sbin/grub-probe: error: unknown filesystem. Auto-detection of a filesystem of /dev/md0p1 failed. Please report this together with the output of "/usr/sbin/grub-probe --device-map=/boot/grub/device.map --target=fs -v /boot/grub" to I don't think it's a bug in grub (so I didn't report it yet) but a fault of mine. So I really wonder how to properly setup my raid1, everything I tried so far failed.

  Read the article

• need to bring back win 7

  - by user290513

  I like making music and playing games and occasionally do some Photoshop. I had a windows 8 computer but my mouse pointer always got stuck, so to try out something new I installed Ubuntu. here is how I installed it: Went to advanced statup options clicked on "use a device" after plugging in my bootable USB with Ubuntu replaced my windows 8 and installed Ubuntu 14.04 LTS I hope I did it correctly though. So after a few months I could've really find out a good Audio Production (not LMMS, because I use Stagelight) software nor something that could be familiar to the UI of Photoshop. So I decided to bring back Windows, but because of the bad experience of 8 I thought about bringing back win 7 So I used an app named WinUSB to make my bootable USB drive after formatting it to NTFS in GParted But when I go to my grub menu, my USB doesn't show up and my PC being a UEFI device. I don't know how to get to the bios of my device. Can somebody tell how to install Windows 7 completely and deleting Ubuntu or at least give me a link to a tutorial. I have a netbook: it is an Acer Aspire One 725. I'm fine with using commands in terminal and another thing that my laptop doesn't have a CD drive or reader, I can't put a CD inside

  Read the article

• Extending partition on linux gparted but not more space in the vm

  - by Asken

  I have a vm test installation of a linux running a build server. Unfortunately I just pressed ok when adding the disk and ended up with an 8gb drive to play with. Well into the test the builds are consuming more and more space, of course. The vm drive was resized to 21gb and using gparted I expanded the drive partitions and that all worked fine but when I go back into the console and do df there's still only 8gb available. How can I claim the other 13gb I added? fdisk -l Disk /dev/sda: 21.0 GB, 20971520000 bytes 255 heads, 63 sectors/track, 2549 cylinders, total 40960000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006d284 Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 40959999 20229121 5 Extended /dev/sda5 501760 40959999 20229120 8e Linux LVM vgdisplay --- Volume group --- VG Name ct System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 19.29 GiB PE Size 4.00 MiB Total PE 4938 Alloc PE / Size 1977 / 7.72 GiB Free PE / Size 2961 / 11.57 GiB VG UUID MwiMAz-52e1-iGVf-eL4f-P5lq-FvRA-L73Sl3 lvdisplay --- Logical volume --- LV Name /dev/ct/root VG Name ct LV UUID Rfk9fh-kqdM-q7t5-ml6i-EjE8-nMtU-usBF0m LV Write Access read/write LV Status available # open 1 LV Size 5.73 GiB Current LE 1466 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Name /dev/ct/swap_1 VG Name ct LV UUID BLFaa6-1f5T-4MM0-5goV-1aur-nzl9-sNLXIs LV Write Access read/write LV Status available # open 2 LV Size 2.00 GiB Current LE 511 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1

  Read the article

• Get Matrox Millenium video card working in Ubuntu 9.10

  - by wcoenen

  I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• How to back up initial state of external backup drive?

  - by intuited

  I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it. The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk. The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes. I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes. So I've resorted to dumping the disk state and partition data separately. I've dumped the partition state with sfdisk -d /dev/sdb > sfdisk.-d.out I've also created a compressed image of the NTFS partition (the only one on the disk) with ntfsclone --save-image --output - /dev/sdb1 | gzip -c > ntfsclone.img.gz Is there anything else I should do to ensure that I can restore the precise original state of the drive?

  Read the article

• Bacula stops writing to disk volume after 2GB

  - by m.list

  Bacula Version: 5.2.5 I have configured bacula to write volumes to disk, however bacula stops writing to the volume as soon as it reaches 2gb. The file system is not an issue as I have stored files larger than 2gb. 06-Dec 17:22 backup-sd JobId 8421: End of Volume "Full-Monthly-0005" at 0:2147475577 on device "FileStorage" (/nfs/backup-pool). Write of 64512 bytes got 8069. 06-Dec 17:22 backup-sd JobId 8421: End of medium on Volume "Full-Monthly-0005" Bytes=2,147,475,578 Blocks=33,288 at 06-Dec-2012 17:22. backup1@backup:/nfs/backup-pool$ ls -alh Full-Monthly-0005 <br> -rw-r----- 1 bacula tape 2.0G Dec 3 16:14 Full-Monthly-0005 bacula-dir.conf: Pool { Name = Full-Monthly Pool Type = Backup Recycle = yes Volume Retention = 5 months Volume Use Duration = 1 day Maximum Volumes = 5 Maximum Volume Bytes = 12gb } bacula-sd.conf: Device { Name = FileStorage Media Type = File Archive Device = /nfs/backup-pool LabelMedia = yes # lets Bacula label unlabeled media Random Access = Yes RemovableMedia = no AlwaysOpen = no Label media = yes Maximum Volume Size = 12gb } In my original configuration Maximum Volume Bytes and Maximum Volume Size were not set at all and so should have defauted to no maximum but that did not work either.

  Read the article

• Using multiple USB webcams in Linux

  - by rachelderp

  Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

  Read the article

• zfs pool error, how to determine which drive failed in the past

  - by Kendrick

  I had been copying data from my pool so that I could rebuild it with a different version so that I could go away from solaris 11 and to one that is portable between freebsd/openindia etc. it was copying at 20mb a sec the other day which is about all my desktop drive can handle writing from the network. suddently lastnight it went down to 1.4mb i ran zpool status today and got this. pool: store state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scan: none requested config: NAME STATE READ WRITE CKSUM store ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 c8t3d0p0 ONLINE 0 0 2 c8t4d0p0 ONLINE 0 0 10 c8t2d0p0 ONLINE 0 0 0 it is currently a 3 x1tb drive array. what tools would best be used to determine what the error was and which drive is failing. per the admin doc The second section of the configuration output displays error statistics. These errors are divided into three categories: READ – I/O errors occurred while issuing a read request. WRITE – I/O errors occurred while issuing a write request. CKSUM – Checksum errors. The device returned corrupted data as the result of a read request. it was saying low counts could be any thing from a power flux to a disk event but gave no suggestions as to what tools to check and determine with.

  Read the article

• How can I get DVDs playing after a Vista to XP change?

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• How to fix a damaged/corrupted NTFS filesystem/partition without losing the data on it?

  - by Gareth

  I was going to install Fedora 15 along side my Windows 7 Starter on my Acer Apire One D255E and at some point during the resizing of the NTFS partition (the one with Windows on it) the setup failed. Now I cannot access this partition from any OS. When I tried to access it from a Fedora install running on a USB flashdrive I get this error: Error mounting: mount exited with exit code 12: Failed to read last sector (452534271): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? It doesn't make a lot of sense to me but I was really hoping it would to someone and they can give me a way to restore the partition without losing everything on it (I have a lot of important notes from various classes on there)? Cheers.

  Read the article

• Protocol (or service publish/discovery) to detect devices in network

  - by Gobliins

  we connect some embedded devices in a network. What i am looking for now, is a way to find the devices IP and identify them. We work with Windows PC´s and i am about to write a C# tool that should do this. I thought about send a udp broadcast and in the ack i.e. is the device´s ip, which would mean the device needs a daemon runnig to assign an ip itself. Running a service (like a printer) on the device, and on the PC just lookup for the service. I read about some things like apipa, zeroconf, ipv4 local link, bonjour, dns-sd, mdns, bonjour; They can automatically assign ip´s and publish services in a network. My Question is, can someone recommend me what would be good for my task? -The protocol or Service should be low on ressource (memory/cpu usage) use. -Are there some standard protocolls to use? -Is DNS a good idea or would it be to ressource consumpting just for finding a device´s IP? -Should also work when no dhcp servers are around. edit: To clarify a bit: The IP configuration is automatic. The problem to focus is how to tell the PC which IP in the network (or a direct connection in this vase there would only be one) belongs to the device (identity).

  Read the article

• How can I get DVDs playing after a Vista to XP change? [closed]

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• How to turn off the display in Windows 8 without locking or making computer go to sleep?

  - by darshshah

  How to turn of the display in Windows 8 without locking or making computer go to sleep ? The problem is that when I enable ‘Turn off display after x minutes’ feature from control panel, the device goes into sleep after ‘x’ minutes. It seems that both the options – turn off display/put computer to sleep are connected. It devices goes automatically to sleep mode as soon as the display is turned off. So, is there any method to turn off the display of the device without it going into sleep mode ? Someone wrote in the microsoft forum " The whole key to this problem seems to be the "Turn off the Display" setting. If you have that set to 5 minutes, 10 minutes, 15 minutes, etc...the computer will go to sleep one minute after you lock the screen. With this setting set to "Never", it doesn't do it. So something is wrong there." I want to turnoff the display but don't want to lock the device. Is that also possible ? Thanks

  Read the article

• 'rsync' is not recognized as an internal or external command, operable program or batch file

  - by user1688269

  I am VERY new to rsync and cygwin and I'm pretty sure I've installed everything correctly. I am trying to (for now) just rsync two Windows XP Laptops to tranfer files across from the one to the other to get a feel of it before I tackle bigger projects. This is the code I try use to transfer the files but I always get the same error. $ rsync -zrptL -v -e 'ssh -p 222' /tmp/rawr/ [email protected]:/tmp/play [email protected]'s password: 'rsync' is not recognized as an internal or external command, operable program or batch file. rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at /home/lapo/package/rsync-3.0.9-1/src/rsync-3.0.9/io.c(605) [sender=3.0.9] What could be the problem? I am really stuck at the moment.

  Read the article

• Boot log from remotely managed/hacked iPhone for analysis

  - by user1319903

  in reference to my other post. syslog captured immediately after a hard reset for analysis of foul play. Apr 8, 2012 10:08:36 PM - dataaccessd [53] (Notice): 137860|CoreDAV|Warn |Account "iCloud" couldn't reach the server at p03-contacts.icloud.com: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0xde63920 {NSErrorFailingURLStringKey=https://%[email protected]/159665024/principal/, NSErrorFailingURLKey=https://%[email protected]/ /principal/, NSLocalizedDescription=The Internet connection appears to be offline., NSUnderlyingError=0xde7dc00 "The Internet connection appears to be offline."} Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: connection interrupted Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): DEBUG: disconnected Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: Canceling Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: connection invalid Apr 8, 2012 10:08:35 PM - kernel [0] (Debug): launchd[82] Builtin profile: container (sandbox) Apr 8, 2012 10:08:35 PM - kernel [0] (Debug): launchd[82] Container: /private/var/mobile/Applications/048D35CA-6427-4EC8-8B76-A194697A7CE9 [69] (sandbox) Apr 8, 2012 10:08:35 PM - wifid [29] (Error): WiFi:[355640915.904103]: Client dataaccessd set type to background application Apr 8, 2012 10:08:35 PM - dataaccessd [53] (Notice): 137860|DA|Warn |Delegate 5ADDBE3B-D5FD-43E1-87D4-C1153733EFAB finished a refresh but it is not registered with the refresh manager Apr 8, 2012 10:08:34 PM - timed [31] (Notice): (Note ) CoreTime: Not setting system time to 04/09/2012 05:08:34 from GPS because time is unchanged Apr 8, 2012 10:08:34 PM - timed [31] (Notice): (Note ) CoreTime: Not setting time zone to America/Los_Angeles from NITZ Apr 8, 2012 10:08:33 PM - kernel [0] (Debug): AppleKeyStore:cp_key_store_action(1) Apr 8, 2012 10:08:33 PM - kernel [0] (Debug): AppleKeyStore:Sending lock change Apr 8, 2012 10:08:32 PM - profiled [20] (Notice): (Note ) profiled: Device unlock notification received Apr 8, 2012 10:08:31 PM - softwareupdated [37] (Notice): 3e828d98 : Cleaning up unused prepared updates Apr 8, 2012 10:08:27 PM - mstreamd [43] (Warning): PSDLog: Can't return photoStreamsPublishStreamID because no Apple Account has Photo Streams enabled Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Not listening to push notifications. Apr 8, 2012 10:08:27 PM - mstreamd [43] (Warning): PSDLog: Can't return photoStreamsPublishStreamID because no Apple Account has Photo Streams enabled Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Not listening to push notifications. Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Retrieved push tokens. Dev: 0, Prod: 0 Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Media stream daemon starting... Apr 8, 2012 10:08:26 PM - SpringBoard [15] (Notice): SMSCTServer is available and ready to rock. Apr 8, 2012 10:08:26 PM - SpringBoard [15] (Error): mms: * isMmsConfigured = 1 Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): BT: failed to get connectable state with error 111 Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): SMS Plugin initialized. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): Telephony plugin initialized Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): SIMToolkit plugin for SpringBoard initialized. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): WiFi picker plugin initialized Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): EKAlarmEngine: Region monitoring not available or enabled. Trigger ignored! Apr 8, 2012 10:08:24 PM - kernel [0] (Debug): AppleH4CamIn::setPowerStateGated: 0 Apr 8, 2012 10:08:24 PM - kernel [0] (Debug): AppleH4CamIn::power_off_hardware Apr 8, 2012 10:08:24 PM - SpringBoard [15] (Notice): IOMobileFrameBufferGetMirroringCapability returning -536870201 via kIOMFBConnectMethod_GetMirroringCapability  Apr 8, 2012 10:08:24 PM - aggregated [61] (Warning): PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing Apr 8, 2012 10:08:24 PM - aggregated [61] (Warning): PLAggregateState Error: Entering state unplugged_screen_on even though we are already in it, doing nothing Apr 8, 2012 10:08:24 PM - wifid [29] (Error): WiFi:[355640904.616440]: Disable WoW requested by "spd" Apr 8, 2012 10:08:24 PM - SpringBoard [15] (Warning): Application windows are expected to have a root view controller at the end of application launch Apr 8, 2012 10:08:23 PM - SpringBoard [15] (Warning): BTM: attaching to BTServer Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadFirmware_gated: fw len=1232920 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadFirmware_gated - firmware checksum: 0x05935019 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_on_hardware Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_Init - No set-file loaded for camera channel 0 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_Init - No set-file loaded for camera channel 1 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_InitialSensorDetection - found sensor on chan 0: 0x0145 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_InitialSensorDetection - found sensor on chan 1: 0x7736 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_off_hardware Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadSetfile_gated (camChan=0) Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadSetfile_gated (camChan=1) Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::setPowerStateGated: 1 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_on_hardware Apr 8, 2012 10:08:23 PM - profiled [20] (Notice): (Note ) profiled: Locking device Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'cdma', '    '} added to resources Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function PTP Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction all functions registered- we are ready to start usb stack Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'gsm ', 'nb  '} added to resources Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'gsm ', 'wb  '} added to resources Apr 8, 2012 10:08:22 PM - MRMLowDiskUEA [12] (Notice): MobileDelete: LowDisk Plugin: start Apr 8, 2012 10:08:22 PM - MRMLowDiskUEA [12] (Notice): kqueue registration successful Apr 8, 2012 10:08:22 PM - mediaserverd [44] (Error): 22:08:22.522867 com.apple.AVConference: /SourceCache/GameKitServices/GameKitServices-344.21/AVConference.subproj/Sources/AVConferenceServer.m:1867: AVConferenceServerStart Apr 8, 2012 10:08:22 PM - CommCenter [18] (Notice): Carrier bundle value for recipient address: 28818773 Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: iPod USB Interface Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: USBAudioControl Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: USBAudioStreaming Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: IapOverUsbHid Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBEthernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): IOAccessoryPortUSB::start Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): virtual bool AppleUSBDeviceMux::start(IOService*) build: Feb  1 2012 23:16:46 Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): init_waste Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleUSBEthernetDevice::start: Host MAC address = 02:(this Mac address does not physically exist) -edit Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleUSBEthernetDevice: Ethernet address  Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'cdma' '    ' } Apr 8, 2012 10:08:21 PM - wifid [29] (Error): WiFi:[355640901.282776]: Could not read APPLE80211_IOC_SUPPORTED_CHANNELS err=82 Apr 8, 2012 10:08:21 PM - wifid [29] (Error): WiFi:[355640901.312786]: Client itunesstored is background application Apr 8, 2012 10:08:21 PM - timed [31] (Notice): (Note ) CoreTime: Want active time in 38.24hrs. Need active time in 121.57hrs. Apr 8, 2012 10:08:21 PM - SpringBoard [15] (Notice): MultitouchHID: detection mode: 255-0 (deferring until bootloaded) Apr 8, 2012 10:08:21 PM - CLTM [12] (Error): CLTM: resetting temps: now = 1333948101, last update = -2147483648 Apr 8, 2012 10:08:21 PM - locationd [28] (Error): WiFi:[355640901.852993]: WiFiManager now available Apr 8, 2012 10:08:21 PM - OTACrashCopier [62] (Notice): (Warn ) Failed to read attributes from '/var/mobile/Library/OTALogging/.last_successful_submission_marker' Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'gsm ' 'nb  ' } Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'gsm ' 'wb  ' } Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): successful initialization Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore:initFirmware(): 2496 PropTxStatus feature is not enabled for this platform  Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initDongle():: creating virtual interface with prefix = ap Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initDongle(): Core Driver Initialization Time 19.38798583 Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): 000019.281423 hsic-baseband::safetyNet: port is not connected Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 _create_cesm_vault: try to create blob Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 _create_cesm_vault: blob written Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 ping_configd: Not setting host name, it already has one: Pete's iPod  Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 lookup_baseband_info_new: radio not ready: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Original act. state: Activated Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: radio not ready, don't change activation status, wait for notification, status: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Activation state now is Activated Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Warning): lockdown says the device is: [Activated], state is 3 Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Warning): lockdown says we've previously registered: [1], state is 1 Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 notification_worker: now listening for CT notifications Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 notification_worker: we've registered for notifications, now make sure we didn't miss one... Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Original act. state: Activated Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: radio not ready, don't change activation status, wait for notification, status: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Activation state now is Activated Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Notice): Posting 'com.apple.iokit.hid.displayStatus' notifyState=1 Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Notice): __IOHIDLoadBundles: Loaded 1 HID plugin Apr 8, 2012 10:08:19 PM - wifiFirmwareLoader [30] (Warning): [    18.778 sec] Downloaded firmware, 192512 bytes Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleKeyStore:cp_key_store_action(0) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 128 bytes of prox calibration data ("built-in") Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 1024 bytes of calibration data ("built-in") Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::attachBusGated(): Bus Driver Initialization Time 18.266927958 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore:attachBusGated(): Starting with MAC Address: 00:f4:b9:2f:d9:8d Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANFirmwareManager::setNVRAMData(): received 778 bytes Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore: Ethernet address 00:f4:b9:2f:d9:8d Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): Loading syscfg. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 56264 bytes of firmware data ("0x0084.bin") in 152ms. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AirPort: Enabled AppleBCMWLANCore (link 0, sys 0, user 0) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANBusInterfaceHSIC::loadFirmware(): DL Ver: chip 0x4330, chiprev 0x4 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): BCMWLAN Firmware Version: wl0: Dec 22 2011 19:03:58 version 5.95.45 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): Firmware supports ap mode; enabling apsta feature (currently enabled) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): country code set to XX Apr 8, 2012 10:08:19 PM - configd [14] (Notice): network configuration changed. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCmdManager::processResponse(): Firmware Error "BCOM Unsupported" on command "WLC_SET_VAR: bus:txglom" (263). Transaction ID 3, length 0 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): Glomming not supported on this device: BCOM Unsupported Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware: apsta set to 1 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::handleEventPacket(): WLC_E_FIFO_CREDIT_MAP,length 6 [9 2 5 3 2] Apr 8, 2012 10:08:19 PM - iapd [49] (Error): Timed out trying to acquire capabilities data. Apr 8, 2012 10:08:19 PM - softwareupdated [37] (Notice): 3e828d98 : Cleaning up unused prepared updates Apr 8, 2012 10:08:19 PM - com.apple.misd [63] (Notice): allowing special port forwarding for test fixtures Apr 8, 2012 10:08:19 PM - hpfd [50] (Notice): resource request { 'N94 ', '    ' } Apr 8, 2012 10:08:19 PM - mstreamd [43] (Notice): (Note ) mstreamd: mstreamd starting up. Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[44] Builtin profile: mediaserverd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[49] Builtin profile: iapd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[53] Builtin profile: dataaccessd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[60] Builtin profile: apsd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[66] Builtin profile: BTServer (sandbox) Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): mDNSResponder mDNSResponder-329.10 (Jan 15 2012 19:07:41) starting iOSVers 9 Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): Note: SetDomainSecrets: no keychain support Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): Note: Compiled without SnowLeopard Fine-Grained Power Management support Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): event logs in /private/var/.fseventsd out of sync with volume.  destroying old logs. (10083 7 10090) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): log dir: /private/var/.fseventsd getting new uuid: 8778E61A-0283-4067-B7DF-F75D109983D1 Apr 8, 2012 10:08:18 PM - fseventsd [51] (Error): failed to make the directory /.fseventsd (30/Read-only file system) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): could not open < (No such file or directory) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): log dir: /tmp getting new uuid: 3919EB54-A54F-4289-864A-5158A25EF9DA Apr 8, 2012 10:08:18 PM - wifid [29] (Error): WiFi:[355640898.328610]: WiFi Preferences is up to date Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): D2DInitialize succeeded Apr 8, 2012 10:08:18 PM - fairplayd.N94 [52] (Notice): Vroum Apr 8, 2012 10:08:18 PM - wifid [29] (Error): WiFi:[355640898.537219]: WiFiManager starting, version: WiFiManager-260.9 Feb  4 2012 13:25:16 Apr 8, 2012 10:08:18 PM - configd [14] (Error): WiFi:[355640898.539342]: WiFiManager now available Apr 8, 2012 10:08:18 PM - keybagd [39] (Error): 3e828d98 main: System Keybag loaded Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.268 sec] Found AppleBCMWLANBusInterface; downloading FW.. Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): Loading "/usr/share/firmware/wifi/4330b2/bcm94330OlympicUNO3.txt", file size = 778 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.276 sec] Sending NVRAM, 778 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): Loading "/usr/share/firmware/wifi/4330b2/n94.trx", file size = 192512 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.300 sec] Sending firmware, 192512 bytes Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyEthernetMacAddress: got 00:f4:b9:2f:d9:8f from syscfg Apr 8, 2012 10:08:18 PM - mediaserverd [44] (Notice): 2012-04-08 10:08:18.817015 PM [AirTunes] HAL plugin started Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt createCFStringWithCFData: Cannot convert NULL data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyBasebandBoardSnum: Could not convert baseband board snum data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt createCFStringWithCFData: Cannot convert NULL data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyWirelessBoardSnum: Could not convert wireless board snum data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Notice): 3e828d98 lockstart_local: Build= 9B179 Apr 8, 2012 10:08:18 PM - lockdownd [23] (Notice): 3e828d98 _load_product_type: using Raptor Certs Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.590 sec] wlan AppleUSBHSICDevice found Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.590 sec] WLAN Enumeration attempt 0 / 6: Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.591 sec] Waiting for AppleBCMWLANBusInterface to enumerate... Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): MMS thread running Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): Communications Center Started. Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): STOP LOCATION UPDATE Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.704327]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.705542]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.706648]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.707418]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:15 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware(), RGB_CTRL (0x00000000) clk_down_ready is not set after 60 msecs Apr 8, 2012 10:08:14 PM - lockdownd [23] (Notice): 3e828d98 main: Starting Up Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn AppleRGBOUT::set_display_device_gated(uint32_t), 1 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 1 fHard: 1 swapBusy: 1  fController: 0 - 1 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_up_hardware() Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): set_crc_notification_state 0 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 1 - 0 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware() Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void *, void *) 0x314b3f0d 0xe215600 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void *, void *) 0x849d5000 0x876e8828 0x314b3f0d 0xe215600 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware(), clock down RGBOUT Apr 8, 2012 10:08:14 PM - SpringBoard [15] (Notice): IOMobileFrameBufferGetMirroringCapability returning -536870201 via kIOMFBConnectMethod_GetMirroringCapability  Apr 8, 2012 10:08:14 PM - backupd [21] (Warning): INFO: Account changed (enabled=0, accountID=159665024) Apr 8, 2012 10:08:13 PM - kernel [0] (Debug): launchd[17] Builtin profile: ptpd (sandbox) Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Warning): Factory called Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.157493]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.158197]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.158878]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Notice): (Note ) PIH: MCUEAPlugin initialized. Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Error): Querying interface Apr 8, 2012 10:08:13 PM - configd [14] (Error): ioctl(SIOCGIFCAP) failed: Device not configured Apr 8, 2012 10:08:13 PM - configd [14] (Error): ioctl(SIOCGIFCAP) failed: Device not configured Apr 8, 2012 10:08:13 PM - configd [14] (Notice): setting hostname to "Petes-iPod" Apr 8, 2012 10:08:13 PM - configd [14] (Notice): network configuration changed. Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Warning): TRACE: sending {    command = kMBMessageAccountChanged; } Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Service starting... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Performing boot time checks. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) MC: Checking for MDM installation... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) MC: ...finished checking for MDM installation. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Checking for new carrier profile... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Installing new carrier profile. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Carrier profile has already been installed. Apr 8, 2012 10:08:12 PM - com.apple.launchd [1] (Warning): (com.apple.ptpd) The exception server is already claimed! Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: mitigation behavior enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: camera equations enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: thermal monitoring enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: registered for wake notification Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 0 to 16384 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 1 to 546 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 2 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 3 to 6553 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 4 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 5 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 6 to 16384 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 9 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 10 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set AppleARMPerformanceControllerDVDFactor1 dithering level to 101% Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set AppleARMPerformanceControllerDVDFactor0 dithering level to 100% Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set charge rate index to 0 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: HID not ready cannot set BL Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: setting thermal status level to 0 (0) [-32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768] Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set allowable transmit power limit to 24.000 dBm [-32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768] Apr 8, 2012 10:08:12 PM - CLTM [12] (Error): CLTM: Could not close relay file Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: thermtgraphrelay is not present

  Read the article

• VirtualCenter Server service terminated with service-specific error 2 (0x2).

  - by LucD

  Hello! This is not a critical case but really annoying. I'm running vCenter 4 (Build 208156) and when we reeboot the server the VirtualCenter Server service can't start and gives the following error "The VMware VirtualCenter Server service terminated with service-specific error 2 (0x2)." And if I try to start the service it fails again giving the same error. What I'll need to do is to stop the IIS Admin service and then start the VirtualCenter Server service and then the IIS Admin service, and everything runs fine until the next reboot. Can someone tell me how to fix this annoying error? Regards

  Read the article

• Configure Zabbix to send email notifications through Exim

  - by gshankar

  I've been working through the installation and configuration of Zabbix over the past couple of days and I think I've finally got everything working... except the sending of notifications / alerts. I'm running on a Ubuntu server which is using Exim to send emails. I'd previously used this Exim setup to send notifications for Nagios so I know that Exim itself works. However, I can't seem to get Zabbix to send out notifications. Here's what I've done so far: Set up a "test trigger" like so: Trigger severity >= "Information" Send message to User "Admin" The Admin user has a email contact (and I've sent command line emails from Exim on the server using "sendmail" to this email address successfully) The media type for email is set. (I've tried 127.0.0.1) I've checked the user permissions and it is read/write for all host groups The triggers are definitely getting set but no actions are being called... I think my problem is within Zabbix as it's not actually executing the actions And idea how to configure this correctly?

  Read the article

• No provisioned iOS devices are available with a compatible iOS version

  - by tarmes

  I'm trying to test my app on an iPhone 3G, however I'm getting this error: No provisioned iOS devices are available with a compatible iOS version. Connect an iOS device with a recent enough version of iOS to run your application or choose an iOS simulator as the destination. Note that: The 3G has version 4.2.1 of iOS installed The iOS deployment target is set to version 4.2 The device has valid development profiles installed I'm using the latest Xcode 4 I'm at a loss. Can anyone help? Tim

  Read the article

• asp.net mvc jquery + tabs +jqgrid +jqgrid loaded only for first tab

  - by niao

  Greetings, I have a problem using jqgrid and jquery tab (I am coding in asp.net mvc) I have two tabs. Each tabs should contains jqgrid with different data. I specify tabs as follows: <script type="text/javascript"> $(document).ready(function() { $("#tabs").tabs(); getContentTab (1); }); function getContentTab(index) { var url='<%= Url.Content("~/Admin/GetWorkspaces") %>/' + index; var targetDiv = "#tabs-" + index; var ajaxLoading = "<img id='ajax-loader' src='<%= Url.Content("~/Content") %>/ajax-loader.gif' align='left' height='28' width='28'>"; $(targetDiv).html("<p>" + ajaxLoading + " Loading...</p>"); $.get(url,null, function(result) { $(targetDiv).html(result); }); } </script> <div id="tabs"> <ul> <li><a href="#tabs-1" onclick="getContentTab(1);">tab1</a></li> <li><a href="#tabs-2" onclick="getContentTab(2);">tab2</a></li> </ul> <div id="tabs-1"> </div> <div id="tabs-2"> </div> </div> As seen above GetWorkspaces action gets my tabs: public ActionResult GetWorkspaces(int id) { string viewName = string.Empty; switch (id) { case 1: viewName = "MarketplaceOfferView"; break; case 2: viewName = "MyMessagesView"; break; } return PartialView(viewName); } each of view is a partial view. In these partial views I have jqgrids specified as follows: <script type="text/javascript"> jQuery("#list").ready(function() { jQuery("#list").jqGrid({ url: '/Admin/GetGridData/', datatype: 'json', mtype: 'GET', colNames: ['Klient', 'Zapytanie', 'Atrakcyjnosc', 'Cena', 'Data poczatkowa', 'Data koncowa', 'Branza', 'Lokalizacja' ], colModel: [ { name: 'CompanyName', index: 'CompanyName', width: 150, align: 'left' }, { name: 'Content', index: 'ContactName', width: 300, align: 'left' }, { name: 'Rating', index: 'Address', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'PostalCode', width: 100, align: 'left' } ], pager: jQuery('#pager'), rowNum: 100, rowList: [5, 10, 20, 50], sortname: 'Operator.FullName', sortorder: "asc", viewrecords: true, imgpath: '/scripts/themes/steel/images', caption: 'Historia moich wiadomosci', height:400 }); // .navGrid(pager, { edit: true, add: false, del: false, refresh: true, search: false }); }); </script> Historia moich wiadomosci <table id="list" class="scroll" cellpadding="0" cellspacing="0" width="100%"> </table> <div id="pager" class="scroll" style="text-align: center;"> </div> For second view I have an action: /Admin/GetGridDataForTab2/ THe problem is that I see a jqgrid only when I click on first tab. When I click on second tab the grid is not displayed and /Admin/GetGridData/ is not executed. Does anybody have an idea what is wrong?

  Read the article

• How to set a management IP on a Dell powerconnect 5524/5548 switch?

  - by John Little

  When you first power on a 5524, connected via the serial console, you are offered a setup wizard where you can enter the management IP/Net/Gateway and enter the admin password. HOWEVER, if you dont do this in 60 seconds, the wizard dissapears, and there seems to be no way to run it again - even if you reboot the box. No commands work in the CLI, it just gives you this prompt: If you type say enable, or login, it gives: >login Unknown parameter May be one from the following list: debug help So no commands seem to work. The CLI reference guide does not seem to have any way to run the wizard, or to set the management port or admin passwords. So by not responding in 60 secons after boot, the unit is bricked. Any ideas?

  Read the article

• iPhone App Shows a white light dot when the iphone is woke up from sleep mode

  - by Futur

  Hi All, I am not sure whether this is a strange case,but this is the scenario. I open my iPhone app in my iPhone device and i work on the app I Lock my iPhone device and I try to unlock the phone from sleep mode When the unlock is successful, I see a white light of size 3 to 4 pixels in the center of the screen and from that point the app resumes. What would be the reason for this error, kindly help.

  Read the article

• Accelerometer & Calibration - iPhone SDK

  - by Kevin

  Hello everyone, I need to use the functionality of an accelerometer in my iphone game. I just have to move an image by tilting the device. However most videos on youtube just show the tilt feature that is somehow inverted and forget to include the calibration. I want the user to calibrate their device to whatever position they're in. Does anyone know how I should get started on this? Your help is greatly appreciated, Kevin

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >