Search Results

Search found 445 results on 18 pages for 'ata ur rehman'.

Page 2/18 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Will installing an Ultra ATA cable backwards affect performance?

  - by GMMan

  I've recently purchased a hard drive upgrade for my Xbox 320GB WD Caviar Blue WD3200AAJB and StarTech.com Ultra ATA/66/100/133 cable IDE66 yes I'm crazy When it came to installing the cable, it was too short (my fault), and there wasn't enough space between the master and slave ends to reach both the DVD drive and the hard drive. The only thing I could do was install the cable backwards and twisting it quite a bit to make it fit. The upgrade works, but reading the manual for the hard drive I replaced (10GB Seagate U Series 5), apparently there is a specific way you have to connect the cable. I don't have that option, so the question comes down to, will my drive performance be at Ultra ATA levels, or is it still performing at original ATA speeds? Is there any way I can test this (benchmarking software for Xbox)?

  Read the article

• Ur/Web new purely functional language for web programming?

  - by Phuc Nguyen

  I came across the Ur/Web project during my search for web frameworks for Haskell-like languages. It looks like a very interesting project done by one person. Basically, it is a domain-specific purely functional language for web programming, taking the best of ML and Haskell. The syntax is ML, but there are type classes and monad from Haskell, and it's strictly evaluated. Server-side is compiled to native code, client to Javascript. See the slides and FAQ page for other advertised advantages. Looking at the demos and their source code, I think the project is very promising. The latest version is something 20110123, so it seems to be under active development at this time. My question: Has anybody here had any further experience with it? Are there problems/annoyances compared to Haskell, apart from ML's slightly more verbose syntax? Even if it's not well known yet, I hope more people will know of it. OMG this looks very cool to me. I don't want this project to die!!

  Read the article

• WD1000FYPS harddrive is marked 0 mb in 3ware (and no SMART)

  - by osgx

  After reboot my SATA 1TB WD1000FYPS (previously is was "Drive error") is marked 0 mb in 3ware web gui. Complete message: Available Drives (Controller ID 0) Port 1 WDC WD1000FYPS-01ZKB0 0.00 MB NOT SUPPORTED [Remove Drive] SMART gives me only Device Model and ATA protocol version 1 (not 7-8 as it must be for SATA) What does it mean? Just before reboot, when is was marked only with "Device Error", smart was: Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: WD-WCASJ1130*** Firmware Version: 02.01B01 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Mar 7 18:47:35 2010 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 188 186 021 Pre-fail Always - 7591 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 229 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3 7 Seek_Error_Rate 0x000e 193 193 000 Old_age Always - 125 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16615 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1564 193 Load_Cycle_Count 0x0032 146 146 000 Old_age Always - 164824 194 Temperature_Celsius 0x0022 117 100 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 What can be wrong with he? Can it be restored? PS new smart is === START OF INFORMATION SECTION === Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 8 00:29:44 2010 MSK SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. Checking for SMART support by trying SMART ENABLE command. Command failed, ata.status=(0x00), ata.command=(0x51), ata.flags=(0x01) Error SMART Enable failed: Input/output error SMART ENABLE failed - this establishes that this device lacks SMART functionality. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. PPS There was a rapid grow of " 192 Power-Off_Retract_Count " before dying. The hard was used in raid, with several hards from the same fabric packaging box (close id's). The hard drives were placed identically. Rapid means almost linear grow from 300 to 1700 in 6-7 hours. Maximal temperature was 41C. (thanks to munin's smart monitoring)

  Read the article

• MySQL on Linux out of memory

  - by Sunrays

  OS: Redhat Enterprise Linux Server Release 5.3 (Tikanga) Architecture: Intel Xeon 64Bit MySQL Server 5.5.20 Enterprise Server advanced edition. Application: Liferay. My database size is 200MB. RAM is 64GB. The memory consumption increases gradually and we run out of memory. Then only rebooting releases all the memory, but then process of memory consumption starts again and reaches 63-64GB in less than a day. Parameters detail: key_buffer_size=16M innodb_buffer_pool_size=3GB inndb_buffer_pool_instances=3 max_connections=1000 innodb_flush_method=O_DIRECT innodb_change_buffering=inserts read_buffer_size=2M read_rnd_buffer_size=256K It's a serious production server issue that I am facing. What could be the reason behind this and how to resolve. This is the report of 2pm today, after Linux was rebooted yesterday @ around 10pm. Output of free -m total used free shared buffers cached Mem: 64455 22053 42402 0 1544 1164 -/+ buffers/cache: 19343 45112 Swap: 74998 0 74998 Output of vmstat 2 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 43423976 1583700 1086616 0 0 1 173 22 27 1 1 98 0 0 2 0 0 43280200 1583712 1228636 0 0 0 146 1265 491 2 2 96 1 0 0 0 0 43421940 1583724 1087160 0 0 0 138 1469 738 2 1 97 0 0 1 0 0 43422604 1583728 1086736 0 0 0 5816 1615 934 1 1 97 0 0 0 0 0 43422372 1583732 1086752 0 0 0 2784 1323 545 2 1 97 0 0 Output of top -n 3 -b top - 14:16:22 up 16:32, 5 users, load average: 0.79, 0.77, 0.93 Tasks: 345 total, 1 running, 344 sleeping, 0 stopped, 0 zombie Cpu(s): 1.0%us, 0.9%sy, 0.0%ni, 98.1%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 66002772k total, 22656292k used, 43346480k free, 1582152k buffers Swap: 76798724k total, 0k used, 76798724k free, 1163616k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6434 mysql 15 0 4095m 841m 5500 S 113.5 1.3 426:53.69 mysqld 1 root 15 0 10344 680 572 S 0.0 0.0 0:03.09 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/7 24 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/7 25 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/7 26 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/8 27 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/8 28 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/8 29 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/9 30 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/9 31 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/9 32 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/10 33 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/10 34 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/10 35 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/11 36 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/11 37 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/11 38 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/12 39 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/12 40 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/12 41 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/13 42 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/13 43 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/13 44 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/14 45 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/14 46 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/14 47 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/15 48 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/15 49 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/15 50 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/16 51 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/16 52 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/16 53 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/17 54 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/17 55 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/17 56 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/18 57 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/18 58 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/18 59 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/19 60 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/19 61 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/19 62 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/20 63 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/20 64 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/20 65 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/21 66 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/21 67 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/21 68 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/22 69 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/22 70 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/22 71 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/23 72 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/23 73 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/23 74 root 10 -5 0 0 0 S 0.0 0.0 0:00.02 events/0 75 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/1 76 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/2 77 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/3 78 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/4 79 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/5 80 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/6 81 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/7 82 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/8 83 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/9 84 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/10 85 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/11 86 root 10 -5 0 0 0 S 0.0 0.0 0:00.01 events/12 87 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/13 88 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/14 89 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/15 90 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/16 91 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/17 92 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/18 93 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/19 94 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/20 95 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/21 96 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/22 97 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/23 98 root 10 -5 0 0 0 S 0.0 0.0 0:00.01 khelper 615 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kthread 643 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/0 644 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/1 645 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/2 646 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/3 647 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/4 648 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/5 649 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/6 650 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/7 651 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/8 652 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/9 653 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/10 654 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/11 655 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/12 656 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/13 657 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/14 658 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/15 659 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/16 660 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/17 661 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/18 662 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/19 663 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/20 664 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/21 665 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/22 666 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/23 667 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid 840 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/0 841 root 18 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/1 842 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/2 843 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/3 844 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/4 845 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/5 846 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/6 847 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/7 848 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/8 849 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/9 850 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/10 851 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/11 852 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/12 853 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/13 854 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/14 855 root 18 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/15 856 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/16 857 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/17 858 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/18 859 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/19 860 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/20 861 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/21 862 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/22 863 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/23 866 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khubd 868 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kseriod 1118 root 23 0 0 0 0 S 0.0 0.0 0:00.00 pdflush 1119 root 15 0 0 0 0 S 0.0 0.0 0:00.11 pdflush 1120 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 kswapd0 1121 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 kswapd1 1122 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0 1123 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 aio/1 1124 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 aio/2 1125 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/3 1126 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/4 1127 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/5 1128 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/6 1129 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/7 1130 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/8 1131 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/9 1132 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/10 1133 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/11 1134 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/12 1135 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/13 1136 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/14 1137 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/15 1138 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/16 1139 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/17 1140 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/18 1141 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/19 1142 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/20 1143 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/21 1144 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/22 1145 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/23 1308 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 kpsmoused 1566 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/0 1567 root 10 -5 0 0 0 S 0.0 0.0 0:00.27 ata/1 1568 root 10 -5 0 0 0 S 0.0 0.0 0:02.39 ata/2 1569 root 10 -5 0 0 0 S 0.0 0.0 0:00.07 ata/3 1570 root 10 -5 0 0 0 S 0.0 0.0 0:00.72 ata/4 1571 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/5 1572 root 10 -5 0 0 0 S 0.0 0.0 0:00.15 ata/6 1573 root 10 -5 0 0 0 S 0.0 0.0 0:00.07 ata/7 1574 root 10 -5 0 0 0 S 0.0 0.0 0:00.06 ata/8 1575 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/9 1576 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/10 1577 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/11 1578 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/12 1579 root 10 -5 0 0 0 S 0.0 0.0 0:00.14 ata/13 1580 root 10 -5 0 0 0 S 0.0 0.0 0:01.56 ata/14 1581 root 10 -5 0 0 0 S 0.0 0.0 0:00.04 ata/15 1582 root 10 -5 0 0 0 S 0.0 0.0 0:00.40 ata/16 1583 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/17 1584 root 10 -5 0 0 0 S 0.0 0.0 0:00.11 ata/18 1585 root 10 -5 0 0 0 S 0.0 0.0 0:00.03 ata/19 1586 root 10 -5 0 0 0 S 0.0 0.0 0:00.02 ata/20 1587 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/21 1588 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/22 1589 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 ata/23 1590 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 ata_aux 1616 root 10 -5 0 0 0 S 0.0 0.0 0:17.20 scsi_eh_0 1617 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1 1668 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2 1669 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 qla2xxx_2_dpc 1670 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_wq_2 1671 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 fc_wq_2 1672 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 fc_dl_2 1673 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3 1674 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 qla2xxx_3_dpc 1675 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_wq_3 1676 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 fc_wq_3 1677 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 fc_dl_3 1728 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 kstriped 1829 root 10 -5 0 0 0 S 0.0 0.0 1:09.14 kjournald 1857 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kauditd 1891 root 11 -4 13008 1188 388 S 0.0 0.0 0:00.40 udevd 4555 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/0 4556 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/1 4557 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/2 4558 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/3 4559 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/4 4560 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/5 4561 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/6 4562 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/7 4563 root 18 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/8 4564 root 19 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/9 4565 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/10 4566 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/11 4567 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/12 4568 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/13 4569 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/14 4570 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/15 4571 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/16 4572 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/17 4573 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/18 4574 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/19 4575 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/20 4576 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/21 4577 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/22 4578 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kmpathd/23 4579 root 18 -5 0 0 0 S 0.0 0.0 0:00.00 kmpath_handlerd 4734 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kjournald 4736 root 10 -5 0 0 0 S 0.0 0.0 0:04.82 kjournald 4744 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kjournald 5238 root RT 0 87584 3648 2768 S 0.0 0.0 0:03.60 multipathd 5537 root 11 -4 27328 812 580 S 0.0 0.0 0:00.14 auditd 5539 root 7 -8 81804 768 616 S 0.0 0.0 0:00.04 audispd 5564 root 15 0 5904 632 512 S 0.0 0.0 0:00.10 syslogd 5567 root 15 0 3800 432 344 S 0.0 0.0 0:00.01 klogd 5579 root 18 0 10728 384 244 S 0.0 0.0 0:00.42 irqbalance 5592 rpc 18 0 8048 584 464 S 0.0 0.0 0:00.00 portmap 5625 root 18 0 11032 768 632 S 0.0 0.0 0:00.00 rpc.statd 5681 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/0 5682 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/1 5683 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/2 5684 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/3 5685 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/4 5686 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/5 5687 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/6 5688 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/7 5689 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/8 5690 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/9 5691 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/10 5692 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 rpciod/11

  Read the article

• How to diagnose failing 6Gbps SATA connection?

  - by whitequark

  I have a Samsung RC530 notebook and OCZ Vertex-3 6Gbps SATA SSD working in AHCI mode. # dmesg | grep DMI SAMSUNG ELECTRONICS CO., LTD. RC530/RC730/RC530/RC730, BIOS 03WD.M008.20110927.PSA 09/27/2011 # lspci -nn 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) # sdparm -a /dev/sda /dev/sda: ATA OCZ-VERTEX3 2.15 At the boot, the following messages are present in dmesg (I am running Debian wheezy @ Linux 3.2.8): # dmesg | grep -iE '(ata|ahci)' [ 5.179783] ahci 0000:00:1f.2: version 3.0 [ 5.179802] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.179864] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 5.195424] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 5.195429] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.195436] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.204035] scsi0 : ahci [ 5.204301] scsi1 : ahci [ 5.204447] scsi2 : ahci [ 5.204592] scsi3 : ahci [ 5.204682] scsi4 : ahci [ 5.204799] scsi5 : ahci [ 5.204917] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 42 [ 5.204920] ata2: DUMMY [ 5.204923] ata3: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 42 [ 5.204924] ata4: DUMMY [ 5.204926] ata5: DUMMY [ 5.204927] ata6: DUMMY [ 5.523039] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.525911] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100 [ 5.531006] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.533703] ata3.00: configured for UDMA/100 [ 5.542790] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133 [ 5.542800] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.552751] ata1.00: configured for UDMA/133 [ 5.553050] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5 [ 5.559621] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC00 PQ: 0 ANSI: 5 [ 5.564059] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 5.564127] sd 0:0:0:0: [sda] Write Protect is off [ 5.564131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.564158] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.564582] sda: sda1 [ 5.564810] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.572006] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.572010] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.572189] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.717181] ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen [ 6.717238] ata1.00: irq_stat 0x08000000, interface fatal error [ 6.717291] ata1: SError: { UnrecovData HostInt 10B8B BadCRC } [ 6.717342] ata1.00: failed command: READ FPDMA QUEUED [ 6.717395] ata1.00: cmd 60/50:00:20:39:58/00:00:00:00:00/40 tag 0 ncq 40960 in [ 6.717396] res 40/00:00:20:39:58/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 6.717503] ata1.00: status: { DRDY } [ 6.717553] ata1: hard resetting link [ 7.033417] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.055234] ata1.00: configured for UDMA/133 [ 7.055262] ata1: EH complete [ 7.147280] ata1.00: exception Emask 0x10 SAct 0xf8 SErr 0x280100 action 0x6 frozen [ 7.147340] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.147393] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.147460] ata1.00: failed command: READ FPDMA QUEUED [ 7.147529] ata1.00: cmd 60/08:18:88:17:41/00:00:02:00:00/40 tag 3 ncq 4096 in [ 7.147531] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.147691] ata1.00: status: { DRDY } [ 7.147754] ata1.00: failed command: READ FPDMA QUEUED [ 7.147821] ata1.00: cmd 60/00:20:f8:42:4c/01:00:02:00:00/40 tag 4 ncq 131072 in [ 7.147822] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.147977] ata1.00: status: { DRDY } [ 7.148036] ata1.00: failed command: READ FPDMA QUEUED [ 7.148100] ata1.00: cmd 60/50:28:f8:43:4c/00:00:02:00:00/40 tag 5 ncq 40960 in [ 7.148101] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148255] ata1.00: status: { DRDY } [ 7.148315] ata1.00: failed command: READ FPDMA QUEUED [ 7.148379] ata1.00: cmd 60/00:30:50:98:64/01:00:02:00:00/40 tag 6 ncq 131072 in [ 7.148380] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148534] ata1.00: status: { DRDY } [ 7.148593] ata1.00: failed command: READ FPDMA QUEUED [ 7.148657] ata1.00: cmd 60/00:38:50:99:64/01:00:02:00:00/40 tag 7 ncq 131072 in [ 7.148658] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148813] ata1.00: status: { DRDY } [ 7.148875] ata1: hard resetting link [ 7.464842] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.486794] ata1.00: configured for UDMA/133 [ 7.486822] ata1: EH complete [ 7.546395] ata1.00: exception Emask 0x10 SAct 0x2f SErr 0x280100 action 0x6 frozen [ 7.546470] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.546531] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.546588] ata1.00: failed command: READ FPDMA QUEUED [ 7.546648] ata1.00: cmd 60/00:00:e0:4b:61/01:00:02:00:00/40 tag 0 ncq 131072 in [ 7.546649] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.546794] ata1.00: status: { DRDY } [ 7.546847] ata1.00: failed command: READ FPDMA QUEUED [ 7.546906] ata1.00: cmd 60/00:08:90:2f:48/01:00:02:00:00/40 tag 1 ncq 131072 in [ 7.546907] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547053] ata1.00: status: { DRDY } [ 7.547106] ata1.00: failed command: READ FPDMA QUEUED [ 7.547165] ata1.00: cmd 60/00:10:90:30:48/01:00:02:00:00/40 tag 2 ncq 131072 in [ 7.547166] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547310] ata1.00: status: { DRDY } [ 7.547363] ata1.00: failed command: READ FPDMA QUEUED [ 7.547422] ata1.00: cmd 60/00:18:50:c7:64/01:00:02:00:00/40 tag 3 ncq 131072 in [ 7.547423] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547568] ata1.00: status: { DRDY } [ 7.547621] ata1.00: failed command: READ FPDMA QUEUED [ 7.547681] ata1.00: cmd 60/00:28:e0:4c:61/01:00:02:00:00/40 tag 5 ncq 131072 in [ 7.547682] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547825] ata1.00: status: { DRDY } [ 7.547882] ata1: hard resetting link [ 7.864408] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.886351] ata1.00: configured for UDMA/133 [ 7.886375] ata1: EH complete [ 7.890012] ata1: limiting SATA link speed to 3.0 Gbps [ 7.890016] ata1.00: exception Emask 0x10 SAct 0x7 SErr 0x280100 action 0x6 frozen [ 7.890093] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.890152] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.890210] ata1.00: failed command: READ FPDMA QUEUED [ 7.890272] ata1.00: cmd 60/00:00:90:33:48/01:00:02:00:00/40 tag 0 ncq 131072 in [ 7.890273] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890418] ata1.00: status: { DRDY } [ 7.890472] ata1.00: failed command: READ FPDMA QUEUED [ 7.890530] ata1.00: cmd 60/00:08:90:34:48/01:00:02:00:00/40 tag 1 ncq 131072 in [ 7.890531] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890672] ata1.00: status: { DRDY } [ 7.890724] ata1.00: failed command: READ FPDMA QUEUED [ 7.890781] ata1.00: cmd 60/78:10:e0:4f:61/00:00:02:00:00/40 tag 2 ncq 61440 in [ 7.890782] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890925] ata1.00: status: { DRDY } [ 7.890981] ata1: hard resetting link [ 8.208021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 8.230100] ata1.00: configured for UDMA/133 [ 8.230124] ata1: EH complete Looks like the SATA interface tries to use 6Gbps link, then fails miserably and Linux fallbacks to 3Gbps. This is somewhat fine for me, as the system boots successfully each time and works under high load (cd linux-3.2.8; make -j16). I've also ran memtest86+ and it did not find any errors. What concerns me more is that Grub sometimes takes a long time to load the images and/or fails to load itself completely. The error is consistent and is probablistic: that is, each time I boot I have a certain chance to fail. Actually, I have a slight suspiction on the cause of the failure. Look at the cabling: What kind of engineer does it this way? Nah. Even 1Gbps Ethernet hardly tolerates cables bent over a small angle, and there you have 6Gbps SATA. How cound I determine and fix the cause of errors and/or switch the link to 3Gbps mode permanently?

  Read the article

• How to update the hard disk device drivers for a ghosted hard drive image so it can run on different hardware: Ultra ATA > SATA

  - by rism

  I've ghosted a Winxp machine from one laptop with Ultra ATA drive, and would like to set it up on another laptop as a multiboot option on another hard driver with a SATA drive. I can install the partition fine but if i make it active and try to boot it it blue screens. The blue screen is so fast i cant even read it, other than to make out it's saying "something", im picking probably hard drive as it goes through POST fine. So basically i would like to boot into my Win7 OS, and then somehow manipulate the XP partition to use updated drivers for the new hard drive/laptop so that i can then at least boot into the XP OS on the new machine and update all the other drivers in safe mode or whatever to get it to run. I assume someone is going to tell me to just do a fresh install, but that kinda defeats the purpose of ghosting at this point. There is a significant amount of personalisation, development setup on the XP machine that i would like to just transfer as is. As it stands ive invested minmal time in getting it to run, just a ghost and recovery and then a blue screen boot or two, so its still well worth it to me, time wise to try this way. Thanks.

  Read the article

• Replacing GTileLayer in Google Maps v3, with ImageMapType, Tile bounding box?

  - by justdev

  I need to update this code: radar_layer.getTileUrl=function(tile,zoom) { var llp = new GPoint(tile.x*256,(tile.y+1)*256); var urp = new GPoint((tile.x+1)*256,tile.y*256); var ll = G_NORMAL_MAP.getProjection().fromPixelToLatLng(llp,zoom); var ur = G_NORMAL_MAP.getProjection().fromPixelToLatLng(urp,zoom); var dt = new Date(); var nowtime = dt.getTime(); var tileurl = "http://demo.remoteservice.com/cgi-bin/serve.cgi?"; tileurl+="bbox="+ll.lng()+","+ll.lat()+","+ur.lng()+","+ur.lat(); tileurl+="&width=256&height=256&reaspect=false&cachetime="+nowtime; return tileurl; }; I got as far as: var DemoLayer = new google.maps.ImageMapType({ getTileUrl: function(coord, zoom) { var llp = new google.maps.Point(coord.x*256,(coord.y+1)*256); var urp = new google.maps.Point((coord.x+1)*256,coord.y*256); var ll = googleMap.getProjection().fromPointToLatLng(llp); var ur = googleMap.getProjection().fromPointToLatLng(urp); var dt = new Date(); var nowtime = dt.getTime(); var tileurl = "http://demo.remoteservice.com/cgi-bin/serve.cgi?"; tileurl+="bbox="+ll.lng()+","+ll.lat()+","+ur.lng()+","+ur.lat(); tileurl+="&width=256&height=256&reaspect=false&cachetime="+nowtime; return tileurl; }, tileSize: new google.maps.Size(256, 256), opacity:1.0, isPng: true }); Specifically, I need help with this section: var llp = new google.maps.Point(coord.x*256,(coord.y+1)*256); var urp = new google.maps.Point((coord.x+1)*256,coord.y*256); var ll = googleMap.getProjection().fromPointToLatLng(llp); var ur = googleMap.getProjection().fromPointToLatLng(urp); The service wants the tile bounding box from what I understand. However, ll and ur do not seem to correct at all. I had it working and displaying the entire map bounding box in each tile, but of course that's not what I need. Any insight here would be greatly appreciated, not having the GTileLayers in V3 is fine if I can work around it, until then I'm frustrated.

  Read the article

• High Linux loads on low CPU/memory usage

  - by user13323

  Hi. I have quite strange situation, where my CentOS 5.5 box loads are high, but the CPU and memory used are pretty low: top - 20:41:38 up 42 days, 6:14, 2 users, load average: 19.79, 21.25, 18.87 Tasks: 254 total, 1 running, 253 sleeping, 0 stopped, 0 zombie Cpu(s): 3.8%us, 0.3%sy, 0.1%ni, 95.0%id, 0.6%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 4035284k total, 4008084k used, 27200k free, 38748k buffers Swap: 4208928k total, 242576k used, 3966352k free, 1465008k cached free -mt total used free shared buffers cached Mem: 3940 3910 29 0 37 1427 -/+ buffers/cache: 2445 1495 Swap: 4110 236 3873 Total: 8050 4147 3903 Iostat also shows good results: avg-cpu: %user %nice %system %iowait %steal %idle 3.83 0.13 0.41 0.58 0.00 95.05 Here is the ps aux output: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 10348 80 ? Ss 2010 2:11 init [3] root 2 0.0 0.0 0 0 ? S< 2010 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/0] root 5 0.0 0.0 0 0 ? S< 2010 0:02 [migration/1] root 6 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/1] root 7 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/1] root 8 0.0 0.0 0 0 ? S< 2010 0:02 [migration/2] root 9 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/2] root 10 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/2] root 11 0.0 0.0 0 0 ? S< 2010 0:02 [migration/3] root 12 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/3] root 13 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/3] root 14 0.0 0.0 0 0 ? S< 2010 0:03 [migration/4] root 15 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/4] root 16 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/4] root 17 0.0 0.0 0 0 ? S< 2010 0:01 [migration/5] root 18 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/5] root 19 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/5] root 20 0.0 0.0 0 0 ? S< 2010 0:11 [migration/6] root 21 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/6] root 22 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/6] root 23 0.0 0.0 0 0 ? S< 2010 0:01 [migration/7] root 24 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/7] root 25 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/7] root 26 0.0 0.0 0 0 ? S< 2010 0:00 [migration/8] root 27 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/8] root 28 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/8] root 29 0.0 0.0 0 0 ? S< 2010 0:00 [migration/9] root 30 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/9] root 31 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/9] root 32 0.0 0.0 0 0 ? S< 2010 0:08 [migration/10] root 33 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/10] root 34 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/10] root 35 0.0 0.0 0 0 ? S< 2010 0:05 [migration/11] root 36 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/11] root 37 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/11] root 38 0.0 0.0 0 0 ? S< 2010 0:02 [migration/12] root 39 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/12] root 40 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/12] root 41 0.0 0.0 0 0 ? S< 2010 0:14 [migration/13] root 42 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/13] root 43 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/13] root 44 0.0 0.0 0 0 ? S< 2010 0:04 [migration/14] root 45 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/14] root 46 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/14] root 47 0.0 0.0 0 0 ? S< 2010 0:01 [migration/15] root 48 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/15] root 49 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/15] root 50 0.0 0.0 0 0 ? S< 2010 0:00 [events/0] root 51 0.0 0.0 0 0 ? S< 2010 0:00 [events/1] root 52 0.0 0.0 0 0 ? S< 2010 0:00 [events/2] root 53 0.0 0.0 0 0 ? S< 2010 0:00 [events/3] root 54 0.0 0.0 0 0 ? S< 2010 0:00 [events/4] root 55 0.0 0.0 0 0 ? S< 2010 0:00 [events/5] root 56 0.0 0.0 0 0 ? S< 2010 0:00 [events/6] root 57 0.0 0.0 0 0 ? S< 2010 0:00 [events/7] root 58 0.0 0.0 0 0 ? S< 2010 0:00 [events/8] root 59 0.0 0.0 0 0 ? S< 2010 0:00 [events/9] root 60 0.0 0.0 0 0 ? S< 2010 0:00 [events/10] root 61 0.0 0.0 0 0 ? S< 2010 0:00 [events/11] root 62 0.0 0.0 0 0 ? S< 2010 0:00 [events/12] root 63 0.0 0.0 0 0 ? S< 2010 0:00 [events/13] root 64 0.0 0.0 0 0 ? S< 2010 0:00 [events/14] root 65 0.0 0.0 0 0 ? S< 2010 0:00 [events/15] root 66 0.0 0.0 0 0 ? S< 2010 0:00 [khelper] root 107 0.0 0.0 0 0 ? S< 2010 0:00 [kthread] root 126 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/0] root 127 0.0 0.0 0 0 ? S< 2010 0:03 [kblockd/1] root 128 0.0 0.0 0 0 ? S< 2010 0:01 [kblockd/2] root 129 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/3] root 130 0.0 0.0 0 0 ? S< 2010 0:05 [kblockd/4] root 131 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/5] root 132 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/6] root 133 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/7] root 134 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/8] root 135 0.0 0.0 0 0 ? S< 2010 0:02 [kblockd/9] root 136 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/10] root 137 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/11] root 138 0.0 0.0 0 0 ? S< 2010 0:04 [kblockd/12] root 139 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/13] root 140 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/14] root 141 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/15] root 142 0.0 0.0 0 0 ? S< 2010 0:00 [kacpid] root 281 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/0] root 282 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/1] root 283 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/2] root 284 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/3] root 285 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/4] root 286 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/5] root 287 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/6] root 288 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/7] root 289 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/8] root 290 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/9] root 291 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/10] root 292 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/11] root 293 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/12] root 294 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/13] root 295 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/14] root 296 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/15] root 299 0.0 0.0 0 0 ? S< 2010 0:00 [khubd] root 301 0.0 0.0 0 0 ? S< 2010 0:00 [kseriod] root 490 0.0 0.0 0 0 ? S 2010 0:00 [khungtaskd] root 493 0.1 0.0 0 0 ? S< 2010 94:48 [kswapd1] root 494 0.0 0.0 0 0 ? S< 2010 0:00 [aio/0] root 495 0.0 0.0 0 0 ? S< 2010 0:00 [aio/1] root 496 0.0 0.0 0 0 ? S< 2010 0:00 [aio/2] root 497 0.0 0.0 0 0 ? S< 2010 0:00 [aio/3] root 498 0.0 0.0 0 0 ? S< 2010 0:00 [aio/4] root 499 0.0 0.0 0 0 ? S< 2010 0:00 [aio/5] root 500 0.0 0.0 0 0 ? S< 2010 0:00 [aio/6] root 501 0.0 0.0 0 0 ? S< 2010 0:00 [aio/7] root 502 0.0 0.0 0 0 ? S< 2010 0:00 [aio/8] root 503 0.0 0.0 0 0 ? S< 2010 0:00 [aio/9] root 504 0.0 0.0 0 0 ? S< 2010 0:00 [aio/10] root 505 0.0 0.0 0 0 ? S< 2010 0:00 [aio/11] root 506 0.0 0.0 0 0 ? S< 2010 0:00 [aio/12] root 507 0.0 0.0 0 0 ? S< 2010 0:00 [aio/13] root 508 0.0 0.0 0 0 ? S< 2010 0:00 [aio/14] root 509 0.0 0.0 0 0 ? S< 2010 0:00 [aio/15] root 665 0.0 0.0 0 0 ? S< 2010 0:00 [kpsmoused] root 808 0.0 0.0 0 0 ? S< 2010 0:00 [ata/0] root 809 0.0 0.0 0 0 ? S< 2010 0:00 [ata/1] root 810 0.0 0.0 0 0 ? S< 2010 0:00 [ata/2] root 811 0.0 0.0 0 0 ? S< 2010 0:00 [ata/3] root 812 0.0 0.0 0 0 ? S< 2010 0:00 [ata/4] root 813 0.0 0.0 0 0 ? S< 2010 0:00 [ata/5] root 814 0.0 0.0 0 0 ? S< 2010 0:00 [ata/6] root 815 0.0 0.0 0 0 ? S< 2010 0:00 [ata/7] root 816 0.0 0.0 0 0 ? S< 2010 0:00 [ata/8] root 817 0.0 0.0 0 0 ? S< 2010 0:00 [ata/9] root 818 0.0 0.0 0 0 ? S< 2010 0:00 [ata/10] root 819 0.0 0.0 0 0 ? S< 2010 0:00 [ata/11] root 820 0.0 0.0 0 0 ? S< 2010 0:00 [ata/12] root 821 0.0 0.0 0 0 ? S< 2010 0:00 [ata/13] root 822 0.0 0.0 0 0 ? S< 2010 0:00 [ata/14] root 823 0.0 0.0 0 0 ? S< 2010 0:00 [ata/15] root 824 0.0 0.0 0 0 ? S< 2010 0:00 [ata_aux] root 842 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_0] root 843 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_1] root 844 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_2] root 845 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_3] root 846 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_4] root 847 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_5] root 882 0.0 0.0 0 0 ? S< 2010 0:00 [kstriped] root 951 0.0 0.0 0 0 ? S< 2010 4:24 [kjournald] root 976 0.0 0.0 0 0 ? S< 2010 0:00 [kauditd] postfix 990 0.0 0.0 54208 2284 ? S 21:19 0:00 pickup -l -t fifo -u root 1013 0.0 0.0 12676 8 ? S<s 2010 0:00 /sbin/udevd -d root 1326 0.0 0.0 90900 3400 ? Ss 14:53 0:00 sshd: root@notty root 1410 0.0 0.0 53972 2108 ? Ss 14:53 0:00 /usr/libexec/openssh/sftp-server root 2690 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/0] root 2691 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/1] root 2692 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/2] root 2693 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/3] root 2694 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/4] root 2695 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/5] root 2696 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/6] root 2697 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/7] root 2698 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/8] root 2699 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/9] root 2700 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/10] root 2701 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/11] root 2702 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/12] root 2703 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/13] root 2704 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/14] root 2705 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/15] root 2706 0.0 0.0 0 0 ? S< 2010 0:00 [kmpath_handlerd] root 2755 0.0 0.0 0 0 ? S< 2010 4:35 [kjournald] root 2757 0.0 0.0 0 0 ? S< 2010 3:38 [kjournald] root 2759 0.0 0.0 0 0 ? S< 2010 4:10 [kjournald] root 2761 0.0 0.0 0 0 ? S< 2010 4:26 [kjournald] root 2763 0.0 0.0 0 0 ? S< 2010 3:15 [kjournald] root 2765 0.0 0.0 0 0 ? S< 2010 3:04 [kjournald] root 2767 0.0 0.0 0 0 ? S< 2010 3:02 [kjournald] root 2769 0.0 0.0 0 0 ? S< 2010 2:58 [kjournald] root 2771 0.0 0.0 0 0 ? S< 2010 0:00 [kjournald] root 3340 0.0 0.0 5908 356 ? Ss 2010 2:48 syslogd -m 0 root 3343 0.0 0.0 3804 212 ? Ss 2010 0:03 klogd -x root 3430 0.0 0.0 0 0 ? S< 2010 0:50 [kondemand/0] root 3431 0.0 0.0 0 0 ? S< 2010 0:54 [kondemand/1] root 3432 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/2] root 3433 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/3] root 3434 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/4] root 3435 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/5] root 3436 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/6] root 3437 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/7] root 3438 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/8] root 3439 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/9] root 3440 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/10] root 3441 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/11] root 3442 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/12] root 3443 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/13] root 3444 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/14] root 3445 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/15] root 3461 0.0 0.0 10760 284 ? Ss 2010 3:44 irqbalance rpc 3481 0.0 0.0 8052 4 ? Ss 2010 0:00 portmap root 3526 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/0] root 3527 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/1] root 3528 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/2] root 3529 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/3] root 3530 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/4] root 3531 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/5] root 3532 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/6] root 3533 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/7] root 3534 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/8] root 3535 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/9] root 3536 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/10] root 3537 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/11] root 3538 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/12] root 3539 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/13] root 3540 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/14] root 3541 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/15] root 3563 0.0 0.0 10160 8 ? Ss 2010 0:00 rpc.statd root 3595 0.0 0.0 55180 4 ? Ss 2010 0:00 rpc.idmapd dbus 3618 0.0 0.0 21256 28 ? Ss 2010 0:00 dbus-daemon --system root 3649 0.2 0.4 563084 18796 ? S<sl 2010 179:03 mfsmount /mnt/mfs -o rw,mfsmaster=web1.ovs.local root 3702 0.0 0.0 3800 8 ? Ss 2010 0:00 /usr/sbin/acpid 68 3715 0.0 0.0 31312 816 ? Ss 2010 3:14 hald root 3716 0.0 0.0 21692 28 ? S 2010 0:00 hald-runner 68 3726 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 68 3730 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-keyboard: listening on /dev/input/event0 root 3773 0.0 0.0 62608 332 ? Ss 2010 0:00 /usr/sbin/sshd ganglia 3786 0.0 0.0 24704 988 ? Ss 2010 14:26 /usr/sbin/gmond root 3843 0.0 0.0 54144 300 ? Ss 2010 1:49 /usr/libexec/postfix/master postfix 3855 0.0 0.0 54860 1060 ? S 2010 0:22 qmgr -l -t fifo -u root 3877 0.0 0.0 74828 708 ? Ss 2010 1:15 crond root 3891 1.4 1.9 326960 77704 ? S<l 2010 896:59 mfschunkserver root 4122 0.0 0.0 18732 176 ? Ss 2010 0:10 /usr/sbin/atd root 4193 0.0 0.8 129180 35984 ? Ssl 2010 11:04 /usr/bin/ruby /usr/sbin/puppetd root 4223 0.0 0.0 18416 172 ? S 2010 0:10 /usr/sbin/smartd -q never root 4227 0.0 0.0 3792 8 tty1 Ss+ 2010 0:00 /sbin/mingetty tty1 root 4230 0.0 0.0 3792 8 tty2 Ss+ 2010 0:00 /sbin/mingetty tty2 root 4231 0.0 0.0 3792 8 tty3 Ss+ 2010 0:00 /sbin/mingetty tty3 root 4233 0.0 0.0 3792 8 tty4 Ss+ 2010 0:00 /sbin/mingetty tty4 root 4234 0.0 0.0 3792 8 tty5 Ss+ 2010 0:00 /sbin/mingetty tty5 root 4236 0.0 0.0 3792 8 tty6 Ss+ 2010 0:00 /sbin/mingetty tty6 root 5596 0.0 0.0 19368 20 ? Ss 2010 0:00 DarwinStreamingServer qtss 5597 0.8 0.9 166572 37408 ? Sl 2010 523:02 DarwinStreamingServer root 8714 0.0 0.0 0 0 ? S Jan31 0:33 [pdflush] root 9914 0.0 0.0 65612 968 pts/1 R+ 21:49 0:00 ps aux root 10765 0.0 0.0 76792 1080 ? Ss Jan24 0:58 SCREEN root 10766 0.0 0.0 66212 872 pts/3 Ss Jan24 0:00 /bin/bash root 11833 0.0 0.0 63852 1060 pts/3 S+ 17:17 0:00 /bin/sh ./launch.sh root 11834 437 42.9 4126884 1733348 pts/3 Sl+ 17:17 1190:50 /usr/bin/java -Xms128m -Xmx512m -XX:+UseConcMarkSweepGC -jar /JavaCore/JavaCore.jar root 13127 4.7 1.1 110564 46876 ? Ssl 17:18 12:55 /JavaCore/fetcher.bin root 19392 0.0 0.0 90108 3336 ? Rs 20:35 0:00 sshd: root@pts/1 root 19401 0.0 0.0 66216 1640 pts/1 Ss 20:35 0:00 -bash root 20567 0.0 0.0 90108 412 ? Ss Jan16 1:58 sshd: root@pts/0 root 20569 0.0 0.0 66084 912 pts/0 Ss Jan16 0:00 -bash root 21053 0.0 0.0 63856 28 ? S Jan30 0:00 /bin/sh /usr/bin/WowzaMediaServerd /usr/local/WowzaMediaServer/bin/setenv.sh /var/run/WowzaM root 21054 2.9 10.3 2252652 418468 ? Sl Jan30 314:25 java -Xmx1200M -server -Djava.net.preferIPv4Stack=true -Dcom.sun.management.jmxremote=true - root 21915 0.0 0.0 0 0 ? S Feb01 0:00 [pdflush] root 29996 0.0 0.0 76524 1004 pts/0 S+ 14:41 0:00 screen -x Any idea what could this be, or where I should look for more diagnostic information? Thanks.

  Read the article

• Dell PERC 5 - RAID-10 keeps rebuilding drive 2 every day

  - by raid question

  I have a Dell PowerEdge 2950 with this card: RAID bus controller [0104]: Dell PowerEdge Expandable RAID controller 5 [1028:0015] and six disks in a RAID-10. I replaced drive 2, because it didn't show up, and then it started to rebuild itself: root@backup01:~# megaraidsas-status -- Arrays informations -- -- ID | Type | Size | Status a0d0 | RAID 10 | 5587GiB | DEGRADED -- Disks informations -- ID | Model | Status | Warnings a0e8s0 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s1 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5394 a0e8s2 | ATA ST2000DM001-1E61 1863GiB | rebuild | errs: media:0 other:99 a0e8s3 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s4 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s5 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 The rebuild finishes, then the virtual drive becomes optimal, and drive 2 goes online. Then once a day, drive 2 acts like it's been removed, and the rebuild starts all over again. How do I make this once a day rebuild stop? Event Description: Removed: PD 02(e1/s2) Event Description: Removed: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=1221000002000000,0000000000000000 Event Description: State change on VD 00/0 from OPTIMAL(3) to DEGRADED(2) Event Description: VD 00/0 is now DEGRADED1 Event Description: State change on PD 02(e1/s2) from ONLINE(18) to FAILED(11) Event Description: State change on PD 02(e1/s2) from FAILED(11) to UNCONFIGURED_BAD(1) Event Description: Background Initialization failed on VD 00/0 Event Description: Inserted: PD 02(e1/s2) Event Description: Inserted: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=1221000002000000,0000000000000000 Event Description: PD 02(e1/s2) is not a certified drive Event Description: State change on PD 02(e1/s2) Event Description: State change on PD 02(e1/s2) from UNCONFIGURED_GOOD(0) to OFFLINE(10) from UNCONFIGURED_BAD(1) to UNCONFIGURED_GOOD(0) Event Description: Rebuild automatically started on PD 02(e1/s2) Event Description: State change on PD 02(e1/s2) from OFFLINE(10) to REBUILD(14)

  Read the article

• Why load increase ,ssd iops increase but cpu iowait decrease?

  - by mq44944

  There is a strange thing on my server which has a mysql running on it. The QPS is more than 4000 but TPS is less than 20. The server load is more than 80 and cpu usr is more than 86% but iowait is less than 8%. The disk iops is more than 16000 and util of disk is more than 99%. When the QPS decreases, the load decreases, the cpu iowait increases. I can't catch this! root@mypc # dmidecode | grep "Product Name" Product Name: PowerEdge R510 Product Name: 084YMW root@mypc # megacli -PDList -aALL |grep "Inquiry Data" Inquiry Data: SEAGATE ST3600057SS ES656SL316PT Inquiry Data: SEAGATE ST3600057SS ES656SL30THV Inquiry Data: ATA INTEL SSDSA2CW300362CVPR201602A6300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR2044037K300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204402PX300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204403WN300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR202000HU300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR202001E7300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204402WE300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204404E5300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204401QF300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR20450001300EGN the mysql data files lie on the ssd disks which are organizaed using RAID 10. root@mypc # megacli -LDInfo -L1 -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 1 (Target Id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:1427840MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:5 Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Exit Code: 0x00 -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:05:29|79.80 64.49 42.00| 82 7 6 5| 0 0|16421.1 10.6262705.9 85.2 8.3 0.5 0.1 99.5| 0 0 0 3968 0| 495482 96.58| 09:05:30|79.80 64.49 42.00| 79 7 8 6| 0 0|15907.4 230.6254409.7 6357.5 8.4 0.5 0.1 98.5| 0 0 0 4195 0| 496434 96.68| 09:05:31|81.34 65.07 42.31| 81 7 7 5| 0 0|16198.7 8.6259029.2 99.8 8.1 0.5 0.1 99.3| 0 0 0 4220 0| 508983 96.70| 09:05:32|81.34 65.07 42.31| 82 7 5 5| 0 0|16746.6 8.7267853.3 92.4 8.5 0.5 0.1 99.4| 0 0 0 4084 0| 503834 96.54| 09:05:33|81.34 65.07 42.31| 81 7 6 5| 0 0|16498.7 9.6263856.8 92.3 8.0 0.5 0.1 99.3| 0 0 0 4030 0| 507051 96.60| 09:05:34|81.34 65.07 42.31| 80 8 7 6| 0 0|16328.4 11.5261101.6 95.8 8.1 0.5 0.1 98.3| 0 0 0 4119 0| 504409 96.63| 09:05:35|81.31 65.33 42.52| 82 7 6 5| 0 0|16374.0 8.7261921.9 92.5 8.1 0.5 0.1 99.7| 0 0 0 4127 0| 507279 96.66| 09:05:36|81.31 65.33 42.52| 81 8 6 5| 0 0|16496.2 8.6263832.0 84.5 8.5 0.5 0.1 99.2| 0 0 0 4100 0| 505054 96.59| 09:05:37|81.31 65.33 42.52| 82 8 6 4| 0 0|16239.4 9.6259768.8 84.3 8.0 0.5 0.1 99.1| 0 0 0 4273 0| 510621 96.72| 09:05:38|81.31 65.33 42.52| 81 7 6 5| 0 0|16349.6 8.7261439.2 81.4 8.2 0.5 0.1 98.9| 0 0 0 4171 0| 510145 96.67| 09:05:39|81.31 65.33 42.52| 82 7 6 5| 0 0|16116.8 8.7257667.6 96.5 8.0 0.5 0.1 99.1| 0 0 0 4348 0| 513093 96.74| 09:05:40|79.60 65.24 42.61| 79 7 7 7| 0 0|16154.2 242.9258390.4 6388.4 8.5 0.5 0.1 99.0| 0 0 0 4033 0| 507244 96.70| 09:05:41|79.60 65.24 42.61| 79 7 8 6| 0 0|16583.1 21.2265129.6 173.5 8.2 0.5 0.1 99.1| 0 0 0 3995 0| 501474 96.57| 09:05:42|79.60 65.24 42.61| 81 8 6 5| 0 0|16281.0 9.7260372.2 69.5 8.3 0.5 0.1 98.7| 0 0 0 4221 0| 509322 96.70| 09:05:43|79.60 65.24 42.61| 80 7 7 6| 0 0|16355.3 8.7261515.5 104.3 8.2 0.5 0.1 99.6| 0 0 0 4087 0| 502052 96.62| -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:05:44|79.60 65.24 42.61| 83 7 5 4| 0 0|16469.4 11.6263387.0 138.8 8.2 0.5 0.1 98.7| 0 0 0 4292 0| 509979 96.65| 09:05:45|79.07 65.37 42.77| 80 7 6 6| 0 0|16659.5 9.7266478.7 85.0 8.4 0.5 0.1 98.5| 0 0 0 3899 0| 496234 96.54| 09:05:46|79.07 65.37 42.77| 78 7 7 8| 0 0|16752.9 8.7267921.8 97.1 8.4 0.5 0.1 98.9| 0 0 0 4126 0| 508300 96.57| 09:05:47|79.07 65.37 42.77| 82 7 6 5| 0 0|16657.2 9.6266439.3 84.3 8.3 0.5 0.1 98.9| 0 0 0 4086 0| 502171 96.57| 09:05:48|79.07 65.37 42.77| 79 8 6 6| 0 0|16814.5 8.7268924.1 77.6 8.5 0.5 0.1 99.0| 0 0 0 4059 0| 499645 96.52| 09:05:49|79.07 65.37 42.77| 81 7 6 5| 0 0|16553.0 6.8264708.6 42.5 8.3 0.5 0.1 99.4| 0 0 0 4249 0| 501623 96.60| 09:05:50|79.63 65.71 43.01| 79 7 7 7| 0 0|16295.1 246.9260475.0 6442.4 8.7 0.5 0.1 99.1| 0 0 0 4231 0| 511032 96.70| 09:05:51|79.63 65.71 43.01| 80 7 6 6| 0 0|16568.9 8.7264919.7 104.7 8.3 0.5 0.1 99.7| 0 0 0 4272 0| 517177 96.68| 09:05:53|79.63 65.71 43.01| 79 7 7 6| 0 0|16539.0 8.6264502.9 87.6 8.4 0.5 0.1 98.9| 0 0 0 3992 0| 496728 96.52| 09:05:54|79.63 65.71 43.01| 79 7 7 7| 0 0|16527.5 11.6264363.6 92.6 8.5 0.5 0.1 98.8| 0 0 0 4045 0| 502944 96.59| 09:05:55|79.63 65.71 43.01| 80 7 7 6| 0 0|16374.7 12.5261687.2 134.9 8.6 0.5 0.1 99.2| 0 0 0 4143 0| 507006 96.66| 09:05:56|76.05 65.20 42.96| 77 8 8 8| 0 0|16464.9 9.6263314.3 111.9 8.5 0.5 0.1 98.9| 0 0 0 4250 0| 505417 96.64| 09:05:57|76.05 65.20 42.96| 79 7 6 7| 0 0|16460.1 8.8263283.2 93.4 8.3 0.5 0.1 98.8| 0 0 0 4294 0| 508168 96.66| 09:05:58|76.05 65.20 42.96| 80 7 7 7| 0 0|16176.5 9.6258762.1 127.3 8.3 0.5 0.1 98.9| 0 0 0 4160 0| 509349 96.72| 09:05:59|76.05 65.20 42.96| 75 7 9 10| 0 0|16522.0 10.7264274.6 93.1 8.6 0.5 0.1 97.5| 0 0 0 4034 0| 492623 96.51| -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:06:00|76.05 65.20 42.96| 79 7 7 7| 0 0|16369.6 21.2261867.3 262.5 8.4 0.5 0.1 98.9| 0 0 0 4305 0| 494509 96.59| 09:06:01|75.33 65.23 43.09| 73 6 9 12| 0 0|15864.0 209.3253685.4 6238.0 10.0 0.6 0.1 98.7| 0 0 0 3913 0| 483480 96.62| 09:06:02|75.33 65.23 43.09| 73 7 8 12| 0 0|15854.7 12.7253613.2 93.6 11.0 0.7 0.1 99.0| 0 0 0 4271 0| 483771 96.64| 09:06:03|75.33 65.23 43.09| 75 7 9 9| 0 0|16074.8 8.7257104.3 81.7 8.1 0.5 0.1 98.5| 0 0 0 4060 0| 480701 96.55| 09:06:04|75.33 65.23 43.09| 76 7 8 9| 0 0|16221.7 9.7259500.1 139.4 8.1 0.5 0.1 97.6| 0 0 0 3953 0| 486774 96.56| 09:06:05|74.98 65.33 43.24| 78 7 8 8| 0 0|16330.7 8.7261166.5 85.3 8.2 0.5 0.1 98.5| 0 0 0 3957 0| 481775 96.53| 09:06:06|74.98 65.33 43.24| 75 7 9 9| 0 0|16093.7 11.7257436.1 93.7 8.2 0.5 0.1 99.2| 0 0 0 3938 0| 489251 96.60| 09:06:07|74.98 65.33 43.24| 75 7 5 13| 0 0|15758.9 19.2251989.4 188.2 14.7 0.9 0.1 99.7| 0 0 0 4140 0| 494738 96.70| 09:06:08|74.98 65.33 43.24| 69 7 10 15| 0 0|16166.3 8.7258474.9 81.2 8.9 0.5 0.1 98.7| 0 0 0 3993 0| 487162 96.58| 09:06:09|74.98 65.33 43.24| 74 7 9 10| 0 0|16071.0 8.7257010.9 93.3 8.2 0.5 0.1 99.2| 0 0 0 4098 0| 491557 96.61| 09:06:10|70.98 64.66 43.14| 71 7 9 12| 0 0|15549.6 216.1248701.1 6188.7 8.3 0.5 0.1 97.8| 0 0 0 3879 0| 480832 96.66| 09:06:11|70.98 64.66 43.14| 71 7 10 13| 0 0|16233.7 22.4259568.1 257.1 8.2 0.5 0.1 99.2| 0 0 0 4088 0| 493200 96.62| 09:06:12|70.98 64.66 43.14| 78 7 8 7| 0 0|15932.4 10.6254779.5 108.1 8.1 0.5 0.1 98.6| 0 0 0 4168 0| 489838 96.63| 09:06:13|70.98 64.66 43.14| 71 8 9 12| 0 0|16255.9 11.5259902.3 103.9 8.3 0.5 0.1 98.0| 0 0 0 3874 0| 481246 96.52| 09:06:14|70.98 64.66 43.14| 60 6 16 18| 0 0|15621.0 9.7249826.1 81.9 8.0 0.5 0.1 99.3| 0 0 0 3956 0| 480278 96.65|

  Read the article

• Error 5 partition table invalid or corrupt

  - by Clodoaldo

  I'm trying to add a second SSD to a Centos 6 system. But I get the Error 5 partition table invalid or corrupt at boot. The system already has a single SSD (sdb) and a pair of HDDs (sd{a,c}) in a RAID 1 array from where it boots. It is as if the new SSD assumes one of the devices of the RAID array. Is it? How to avoid that or rearrange the setup? # cat fstab UUID=967b4035-782d-4c66-b22f-50244fe970ca / ext4 defaults 1 1 UUID=86fd06e9-cdc9-4166-ba9f-c237cfc43e02 /boot ext4 defaults 1 2 UUID=72552a7a-d8ae-4f0a-8917-b75a6239ce9f /ssd ext4 discard,relatime 1 2 UUID=8000e5e6-caa2-4765-94f8-9caeb2bda26e swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 # ll /dev/disk/by-id/ total 0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:0 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:1 -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:2 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a04d7241:8da6023e:f9004352:107a923a -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a22c43b9:f1954990:d3ddda5e:f9aff3c9 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-f403a2d0:447803b5:66edba73:569f8305 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c500383621ff -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c5003838b2e7 -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5e83a97f592139d6 -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5e83a97f592139d6-part1 -> ../../sdb1 # fdisk -l Disk /dev/sdb: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x79298ec9 Device Boot Start End Blocks Id System /dev/sdb1 1 14594 117219328 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d99de Device Boot Start End Blocks Id System /dev/sdc1 1 1275 10240000 fd Linux raid autodetect /dev/sdc2 * 1275 1339 512000 fd Linux raid autodetect /dev/sdc3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b3327 Device Boot Start End Blocks Id System /dev/sda1 1 1275 10240000 fd Linux raid autodetect /dev/sda2 * 1275 1339 512000 fd Linux raid autodetect /dev/sda3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/md0: 10.5 GB, 10484641792 bytes 2 heads, 4 sectors/track, 2559727 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md2: 489.1 GB, 489095557120 bytes 2 heads, 4 sectors/track, 119408095 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 524 MB, 524275712 bytes 2 heads, 4 sectors/track, 127997 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table # cat /etc/grub.conf default=0 timeout=5 splashimage=(hd2,1)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-220.17.1.el6.x86_64) root (hd2,1) kernel /vmlinuz-2.6.32-220.17.1.el6.x86_64 ro root=UUID=967b4035-782d-4c66-b22f-50244fe970ca rd_MD_UUID=f403a2d0:447803b5:66edba73:569f8305 rd_MD_UUID=a22c43b9:f1954990:d3ddda5e:f9aff3c9 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=br-abnt2 crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-220.17.1.el6.x86_64.img

  Read the article

• Error 22 no such partition on adding a SSD

  - by Clodoaldo

  I'm trying to add a second SSD to a Centos 6 system. But I get the error 22 no such partition at boot. The system already has a single SSD (sdb) and a pair of HDDs (sd{a,c}) in a RAID 1 array from where it boots. It is as if the new SSD assumes one of the devices of the RAID array. Is it? How to avoid that or rearrange the setup? # cat fstab UUID=967b4035-782d-4c66-b22f-50244fe970ca / ext4 defaults 1 1 UUID=86fd06e9-cdc9-4166-ba9f-c237cfc43e02 /boot ext4 defaults 1 2 UUID=72552a7a-d8ae-4f0a-8917-b75a6239ce9f /ssd ext4 discard,relatime 1 2 UUID=8000e5e6-caa2-4765-94f8-9caeb2bda26e swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 # ll /dev/disk/by-id/ total 0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:0 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:1 -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:2 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a04d7241:8da6023e:f9004352:107a923a -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a22c43b9:f1954990:d3ddda5e:f9aff3c9 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-f403a2d0:447803b5:66edba73:569f8305 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c500383621ff -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c5003838b2e7 -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5e83a97f592139d6 -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5e83a97f592139d6-part1 -> ../../sdb1 # fdisk -l Disk /dev/sdb: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x79298ec9 Device Boot Start End Blocks Id System /dev/sdb1 1 14594 117219328 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d99de Device Boot Start End Blocks Id System /dev/sdc1 1 1275 10240000 fd Linux raid autodetect /dev/sdc2 * 1275 1339 512000 fd Linux raid autodetect /dev/sdc3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b3327 Device Boot Start End Blocks Id System /dev/sda1 1 1275 10240000 fd Linux raid autodetect /dev/sda2 * 1275 1339 512000 fd Linux raid autodetect /dev/sda3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/md0: 10.5 GB, 10484641792 bytes 2 heads, 4 sectors/track, 2559727 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md2: 489.1 GB, 489095557120 bytes 2 heads, 4 sectors/track, 119408095 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 524 MB, 524275712 bytes 2 heads, 4 sectors/track, 127997 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table # cat /etc/grub.conf default=0 timeout=5 splashimage=(hd2,1)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-220.17.1.el6.x86_64) root (hd2,1) kernel /vmlinuz-2.6.32-220.17.1.el6.x86_64 ro root=UUID=967b4035-782d-4c66-b22f-50244fe970ca rd_MD_UUID=f403a2d0:447803b5:66edba73:569f8305 rd_MD_UUID=a22c43b9:f1954990:d3ddda5e:f9aff3c9 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=br-abnt2 crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-220.17.1.el6.x86_64.img

  Read the article

• LVM / Device Mapper maps wrong device

  - by DaDaDom

  Hi, I run a LVM setup on a raid1 created by mdadm. md2 is based on sda6 (major:minor 8:6) and sdb6 (8:22). md2 is partition 9:2. The VG on top of md2 has 4 LVs, var, home, usr, tmp. First the problem: While booting it seems as if the device mapper takes the wrong partition for the mapping! Immediately after boot the information is like ~# dmsetup table systemlvm-home: 0 4194304 linear 8:22 384 systemlvm-home: 4194304 16777216 linear 8:22 69206400 systemlvm-home: 20971520 8388608 linear 8:22 119538048 systemlvm-home: 29360128 6291456 linear 8:22 243270016 systemlvm-tmp: 0 2097152 linear 8:22 41943424 systemlvm-usr: 0 10485760 linear 8:22 20971904 systemlvm-var: 0 10485760 linear 8:22 10486144 systemlvm-var: 10485760 6291456 linear 8:22 4194688 systemlvm-var: 16777216 4194304 linear 8:22 44040576 systemlvm-var: 20971520 10485760 linear 8:22 31457664 systemlvm-var: 31457280 20971520 linear 8:22 48234880 systemlvm-var: 52428800 33554432 linear 8:22 85983616 systemlvm-var: 85983232 115343360 linear 8:22 127926656 ~# cat /proc/mdstat Personalities : [raid1] md2 : active (auto-read-only) raid1 sda6[0] 151798080 blocks [2/1] [U_] md0 : active raid1 sda1[0] sdb1[1] 96256 blocks [2/2] [UU] md1 : active raid1 sda2[0] sdb2[1] 2931776 blocks [2/2] [UU] I have to manually "lvchange -an" all LVs, add /dev/sdb6 back to the raid and reactivate the LVs, then all is fine. But it prevents me from automounting the partitions and obviously leads to a bunch of other problems. If everything works fine, the information is like ~$ cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb6[1] sda6[0] 151798080 blocks [2/2] [UU] ... ~# dmsetup table systemlvm-home: 0 4194304 linear 9:2 384 systemlvm-home: 4194304 16777216 linear 9:2 69206400 systemlvm-home: 20971520 8388608 linear 9:2 119538048 systemlvm-home: 29360128 6291456 linear 9:2 243270016 systemlvm-tmp: 0 2097152 linear 9:2 41943424 systemlvm-usr: 0 10485760 linear 9:2 20971904 systemlvm-var: 0 10485760 linear 9:2 10486144 systemlvm-var: 10485760 6291456 linear 9:2 4194688 systemlvm-var: 16777216 4194304 linear 9:2 44040576 systemlvm-var: 20971520 10485760 linear 9:2 31457664 systemlvm-var: 31457280 20971520 linear 9:2 48234880 systemlvm-var: 52428800 33554432 linear 9:2 85983616 systemlvm-var: 85983232 115343360 linear 9:2 127926656 I think that LVM for some reason just "takes" /dev/sdb6 which is then missing in the raid. I tried almost all options in the lvm.conf but none seems to work. Below is some more information, like config files. Does anyone have any idea about what is going on here and how to prevent that? If you need any additional information, please let me know Thanks in advance! Dominik The information (off a "repaired" system): ~# cat /etc/debian_version 5.0.4 ~# uname -a Linux kermit 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 GNU/Linux ~# lvm version LVM version: 2.02.39 (2008-06-27) Library version: 1.02.27 (2008-06-25) Driver version: 4.13.0 ~# cat /etc/mdadm/mdadm.conf DEVICE partitions ARRAY /dev/md1 level=raid1 num-devices=2 metadata=00.90 UUID=11e9dc6c:1da99f3f:b3088ca6:c6fe60e9 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=00.90 UUID=92ed1e4b:897361d3:070682b3:3baa4fa1 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=00.90 UUID=601d4642:39dc80d7:96e8bbac:649924ba ~# mount /dev/md1 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md0 on /boot type ext3 (rw) /dev/mapper/systemlvm-usr on /usr type reiserfs (rw) /dev/mapper/systemlvm-tmp on /tmp type reiserfs (rw) /dev/mapper/systemlvm-home on /home type reiserfs (rw) /dev/mapper/systemlvm-var on /var type reiserfs (rw) ~# grep -v ^$ /etc/lvm/lvm.conf | grep -v "#" devices { dir = "/dev" scan = [ "/dev" ] preferred_names = [ ] filter = [ "a|/dev/md.*|", "r/.*/" ] cache_dir = "/etc/lvm/cache" cache_file_prefix = "" write_cache_state = 1 sysfs_scan = 1 md_component_detection = 1 ignore_suspended_devices = 0 } log { verbose = 0 syslog = 1 overwrite = 0 level = 0 indent = 1 command_names = 0 prefix = " " } backup { backup = 1 backup_dir = "/etc/lvm/backup" archive = 1 archive_dir = "/etc/lvm/archive" retain_min = 10 retain_days = 30 } shell { history_size = 100 } global { umask = 077 test = 0 units = "h" activation = 1 proc = "/proc" locking_type = 1 fallback_to_clustered_locking = 1 fallback_to_local_locking = 1 locking_dir = "/lib/init/rw" } activation { missing_stripe_filler = "/dev/ioerror" reserved_stack = 256 reserved_memory = 8192 process_priority = -18 mirror_region_size = 512 readahead = "auto" mirror_log_fault_policy = "allocate" mirror_device_fault_policy = "remove" } :~# vgscan -vvv Processing: vgscan -vvv O_DIRECT will be used Setting global/locking_type to 1 File-based locking selected. Setting global/locking_dir to /lib/init/rw Locking /lib/init/rw/P_global WB Wiping cache of LVM-capable devices /dev/block/1:0: Added to device cache /dev/block/1:1: Added to device cache /dev/block/1:10: Added to device cache /dev/block/1:11: Added to device cache /dev/block/1:12: Added to device cache /dev/block/1:13: Added to device cache /dev/block/1:14: Added to device cache /dev/block/1:15: Added to device cache /dev/block/1:2: Added to device cache /dev/block/1:3: Added to device cache /dev/block/1:4: Added to device cache /dev/block/1:5: Added to device cache /dev/block/1:6: Added to device cache /dev/block/1:7: Added to device cache /dev/block/1:8: Added to device cache /dev/block/1:9: Added to device cache /dev/block/253:0: Added to device cache /dev/block/253:1: Added to device cache /dev/block/253:2: Added to device cache /dev/block/253:3: Added to device cache /dev/block/8:0: Added to device cache /dev/block/8:1: Added to device cache /dev/block/8:16: Added to device cache /dev/block/8:17: Added to device cache /dev/block/8:18: Added to device cache /dev/block/8:19: Added to device cache /dev/block/8:2: Added to device cache /dev/block/8:21: Added to device cache /dev/block/8:22: Added to device cache /dev/block/8:3: Added to device cache /dev/block/8:5: Added to device cache /dev/block/8:6: Added to device cache /dev/block/9:0: Already in device cache /dev/block/9:1: Already in device cache /dev/block/9:2: Already in device cache /dev/bsg/0:0:0:0: Not a block device /dev/bsg/1:0:0:0: Not a block device /dev/bus/usb/001/001: Not a block device [... many more "not a block device"] /dev/core: Not a block device /dev/cpu_dma_latency: Not a block device /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-id/dm-name-systemlvm-home: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/dm-name-systemlvm-tmp: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-name-systemlvm-usr: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-name-systemlvm-var: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr25N7CRZpUMzR18NfS6zeSeAVnVT98LuU: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr3TpFXtLjYGEwn79IdXsSCZPl8AxmqbmQ: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrc5MJ4KolevMjt85PPBrQuRTkXbx6NvTi: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrYXrfdg5OSYDVkNeiQeQksgCI849Z2hx8: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/md-uuid-11e9dc6c:1da99f3f:b3088ca6:c6fe60e9: Already in device cache /dev/disk/by-id/md-uuid-601d4642:39dc80d7:96e8bbac:649924ba: Already in device cache /dev/disk/by-id/md-uuid-92ed1e4b:897361d3:070682b3:3baa4fa1: Already in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0: Aliased to /dev/block/8:0 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0: Aliased to /dev/block/8:16 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-uuid/13c1262b-e06f-40ce-b088-ce410640a6dc: Aliased to /dev/block/253:3 in device cache /dev/disk/by-uuid/379f57b0-2e03-414c-808a-f76160617336: Aliased to /dev/block/253:2 in device cache /dev/disk/by-uuid/4fb2d6d3-bd51-48d3-95ee-8e404faf243d: Already in device cache /dev/disk/by-uuid/5c6728ec-82c1-49c0-93c5-f6dbd5c0d659: Aliased to /dev/block/8:5 in device cache /dev/disk/by-uuid/a13cdfcd-2191-4185-a727-ffefaf7a382e: Aliased to /dev/block/253:1 in device cache /dev/disk/by-uuid/e0d5893d-ff88-412f-b753-9e3e9af3242d: Aliased to /dev/block/8:21 in device cache /dev/disk/by-uuid/e79c9da6-8533-4e55-93ec-208876671edc: Aliased to /dev/block/253:0 in device cache /dev/disk/by-uuid/f3f176f5-12f7-4af8-952a-c6ac43a6e332: Already in device cache /dev/dm-0: Aliased to /dev/block/253:0 in device cache (preferred name) /dev/dm-1: Aliased to /dev/block/253:1 in device cache (preferred name) /dev/dm-2: Aliased to /dev/block/253:2 in device cache (preferred name) /dev/dm-3: Aliased to /dev/block/253:3 in device cache (preferred name) /dev/fd: Symbolic link to directory /dev/full: Not a block device /dev/hpet: Not a block device /dev/initctl: Not a block device /dev/input/by-path/platform-i8042-serio-0-event-kbd: Not a block device /dev/input/event0: Not a block device /dev/input/mice: Not a block device /dev/kmem: Not a block device /dev/kmsg: Not a block device /dev/log: Not a block device /dev/loop/0: Added to device cache /dev/MAKEDEV: Not a block device /dev/mapper/control: Not a block device /dev/mapper/systemlvm-home: Aliased to /dev/dm-2 in device cache /dev/mapper/systemlvm-tmp: Aliased to /dev/dm-3 in device cache /dev/mapper/systemlvm-usr: Aliased to /dev/dm-1 in device cache /dev/mapper/systemlvm-var: Aliased to /dev/dm-0 in device cache /dev/md0: Already in device cache /dev/md1: Already in device cache /dev/md2: Already in device cache /dev/mem: Not a block device /dev/net/tun: Not a block device /dev/network_latency: Not a block device /dev/network_throughput: Not a block device /dev/null: Not a block device /dev/port: Not a block device /dev/ppp: Not a block device /dev/psaux: Not a block device /dev/ptmx: Not a block device /dev/pts/0: Not a block device /dev/ram0: Aliased to /dev/block/1:0 in device cache (preferred name) /dev/ram1: Aliased to /dev/block/1:1 in device cache (preferred name) /dev/ram10: Aliased to /dev/block/1:10 in device cache (preferred name) /dev/ram11: Aliased to /dev/block/1:11 in device cache (preferred name) /dev/ram12: Aliased to /dev/block/1:12 in device cache (preferred name) /dev/ram13: Aliased to /dev/block/1:13 in device cache (preferred name) /dev/ram14: Aliased to /dev/block/1:14 in device cache (preferred name) /dev/ram15: Aliased to /dev/block/1:15 in device cache (preferred name) /dev/ram2: Aliased to /dev/block/1:2 in device cache (preferred name) /dev/ram3: Aliased to /dev/block/1:3 in device cache (preferred name) /dev/ram4: Aliased to /dev/block/1:4 in device cache (preferred name) /dev/ram5: Aliased to /dev/block/1:5 in device cache (preferred name) /dev/ram6: Aliased to /dev/block/1:6 in device cache (preferred name) /dev/ram7: Aliased to /dev/block/1:7 in device cache (preferred name) /dev/ram8: Aliased to /dev/block/1:8 in device cache (preferred name) /dev/ram9: Aliased to /dev/block/1:9 in device cache (preferred name) /dev/random: Not a block device /dev/root: Already in device cache /dev/rtc: Not a block device /dev/rtc0: Not a block device /dev/sda: Aliased to /dev/block/8:0 in device cache (preferred name) /dev/sda1: Aliased to /dev/block/8:1 in device cache (preferred name) /dev/sda2: Aliased to /dev/block/8:2 in device cache (preferred name) /dev/sda3: Aliased to /dev/block/8:3 in device cache (preferred name) /dev/sda5: Aliased to /dev/block/8:5 in device cache (preferred name) /dev/sda6: Aliased to /dev/block/8:6 in device cache (preferred name) /dev/sdb: Aliased to /dev/block/8:16 in device cache (preferred name) /dev/sdb1: Aliased to /dev/block/8:17 in device cache (preferred name) /dev/sdb2: Aliased to /dev/block/8:18 in device cache (preferred name) /dev/sdb3: Aliased to /dev/block/8:19 in device cache (preferred name) /dev/sdb5: Aliased to /dev/block/8:21 in device cache (preferred name) /dev/sdb6: Aliased to /dev/block/8:22 in device cache (preferred name) /dev/shm/network/ifstate: Not a block device /dev/snapshot: Not a block device /dev/sndstat: stat failed: Datei oder Verzeichnis nicht gefunden /dev/stderr: Not a block device /dev/stdin: Not a block device /dev/stdout: Not a block device /dev/systemlvm/home: Aliased to /dev/dm-2 in device cache /dev/systemlvm/tmp: Aliased to /dev/dm-3 in device cache /dev/systemlvm/usr: Aliased to /dev/dm-1 in device cache /dev/systemlvm/var: Aliased to /dev/dm-0 in device cache /dev/tty: Not a block device /dev/tty0: Not a block device [... many more "not a block device"] /dev/vcsa6: Not a block device /dev/xconsole: Not a block device /dev/zero: Not a block device Wiping internal VG cache lvmcache: initialised VG #orphans_lvm1 lvmcache: initialised VG #orphans_pool lvmcache: initialised VG #orphans_lvm2 Reading all physical volumes. This may take a while... Finding all volume groups /dev/ram0: Skipping (regex) /dev/loop/0: Skipping (sysfs) /dev/sda: Skipping (regex) Opened /dev/md0 RO /dev/md0: size is 192512 sectors Closed /dev/md0 /dev/md0: size is 192512 sectors Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes Closed /dev/md0 Using /dev/md0 Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes /dev/md0: No label detected Closed /dev/md0 /dev/dm-0: Skipping (regex) /dev/ram1: Skipping (regex) /dev/sda1: Skipping (regex) Opened /dev/md1 RO /dev/md1: size is 5863552 sectors Closed /dev/md1 /dev/md1: size is 5863552 sectors Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes Closed /dev/md1 Using /dev/md1 Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes /dev/md1: No label detected Closed /dev/md1 /dev/dm-1: Skipping (regex) /dev/ram2: Skipping (regex) /dev/sda2: Skipping (regex) Opened /dev/md2 RO /dev/md2: size is 303596160 sectors Closed /dev/md2 /dev/md2: size is 303596160 sectors Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes Closed /dev/md2 Using /dev/md2 Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Closed /dev/md2 /dev/dm-2: Skipping (regex) /dev/ram3: Skipping (regex) /dev/sda3: Skipping (regex) /dev/dm-3: Skipping (regex) /dev/ram4: Skipping (regex) /dev/ram5: Skipping (regex) /dev/sda5: Skipping (regex) /dev/ram6: Skipping (regex) /dev/sda6: Skipping (regex) /dev/ram7: Skipping (regex) /dev/ram8: Skipping (regex) /dev/ram9: Skipping (regex) /dev/ram10: Skipping (regex) /dev/ram11: Skipping (regex) /dev/ram12: Skipping (regex) /dev/ram13: Skipping (regex) /dev/ram14: Skipping (regex) /dev/ram15: Skipping (regex) /dev/sdb: Skipping (regex) /dev/sdb1: Skipping (regex) /dev/sdb2: Skipping (regex) /dev/sdb3: Skipping (regex) /dev/sdb5: Skipping (regex) /dev/sdb6: Skipping (regex) Locking /lib/init/rw/V_systemlvm RB Finding volume group "systemlvm" Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) with 1 mdas /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Using cached label for /dev/md2 Read systemlvm metadata (19) from /dev/md2 at 39936 size 2632 /dev/md2 0: 0 16: home(0:0) /dev/md2 1: 16 24: var(40:0) /dev/md2 2: 40 40: var(0:0) /dev/md2 3: 80 40: usr(0:0) /dev/md2 4: 120 40: var(80:0) /dev/md2 5: 160 8: tmp(0:0) /dev/md2 6: 168 16: var(64:0) /dev/md2 7: 184 80: var(120:0) /dev/md2 8: 264 64: home(16:0) /dev/md2 9: 328 128: var(200:0) /dev/md2 10: 456 32: home(80:0) /dev/md2 11: 488 440: var(328:0) /dev/md2 12: 928 24: home(112:0) /dev/md2 13: 952 206: NULL(0:0) Found volume group "systemlvm" using metadata type lvm2 Read volume group systemlvm from /etc/lvm/backup/systemlvm Unlocking /lib/init/rw/V_systemlvm Closed /dev/md2 Unlocking /lib/init/rw/P_global ~# vgdisplay --- Volume group --- VG Name systemlvm System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 19 VG Access read/write VG Status resizable MAX LV 0 Cur LV 4 Open LV 4 Max PV 0 Cur PV 1 Act PV 1 VG Size 144,75 GB PE Size 128,00 MB Total PE 1158 Alloc PE / Size 952 / 119,00 GB Free PE / Size 206 / 25,75 GB VG UUID rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr ~# pvdisplay --- Physical volume --- PV Name /dev/md2 VG Name systemlvm PV Size 144,77 GB / not usable 16,31 MB Allocatable yes PE Size (KByte) 131072 Total PE 1158 Free PE 206 Allocated PE 952 PV UUID ZSAzP5-iBvr-L7jy-wB8T-AiWz-0g3m-HLK66Y :~# lvdisplay --- Logical volume --- LV Name /dev/systemlvm/home VG Name systemlvm LV UUID YXrfdg-5OSY-DVkN-eiQe-Qksg-CI84-9Z2hx8 LV Write Access read/write LV Status available # open 2 LV Size 17,00 GB Current LE 136 Segments 4 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/systemlvm/var VG Name systemlvm LV UUID 25N7CR-ZpUM-zR18-NfS6-zeSe-AVnV-T98LuU LV Write Access read/write LV Status available # open 2 LV Size 96,00 GB Current LE 768 Segments 7 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Name /dev/systemlvm/usr VG Name systemlvm LV UUID 3TpFXt-LjYG-Ewn7-9IdX-sSCZ-Pl8A-xmqbmQ LV Write Access read/write LV Status available # open 2 LV Size 5,00 GB Current LE 40 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/systemlvm/tmp VG Name systemlvm LV UUID c5MJ4K-olev-Mjt8-5PPB-rQuR-TkXb-x6NvTi LV Write Access read/write LV Status available # open 2 LV Size 1,00 GB Current LE 8 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3

  Read the article

• new block adding error

  - by ata ur rehman

  g++: error: ./gr_my_swig.cc: No such file or directory g++: fatal error: no input files compilation terminated. make[3]: *** [_gr_my_swig_la-gr_my_swig.lo] Error 1 make[3]: Leaving directory `/home/ataurrehman/gr-my-basic/swig' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/ataurrehman/gr-my-basic/swig' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/ataurrehman/gr-my-basic' make: *** [all] Error 2

  Read the article

• How to recover zfs pool when root fs fails

  - by rage

  I have a FreeBSD 8.0 amd64 box w/ 1 ATA drive for system and 4 SATA drives as a RAIDZ pool. The ATA drive isn't mirrored nor part of any pool, but also doesn't hold any valuable data. How can I recover my zpool if this ATA drive fails for any reason, but assume my RAIDZ vdev SATA drives remain intact? Should I also use at least a mirror configuration for that?

  Read the article

• How to recover zfs pool when root fs fails?

  - by user27138

  I have a FreeBSD 8.0 amd64 box w/ 1 ATA drive for system root and 4 SATA drives as a RAIDZ pool. The ATA drive isn't mirrored nor part of any pool, but also doesn't hold any valuable data (other then the system). How can I recover my zpool if this ATA drive fails for any reason, but assume my RAIDZ vdev SATA drives remain intact? Should I also use at least a mirror configuration for that?

  Read the article

• database datatype size

  - by yeeen

  Just to clarify by specifying sth like VARCHAR(45) means it can take up to max 45 characters? I rmb I heard from someone a few years ago that the number in the parathesis doesn't refer to the no of characters, then the person tried to explain to me sth quite complicated which i don't understand n forgot alr. And what is the difference btn CHAR and VARCHAR? I did search ard a bit and see that CHAR gives u the max of the size of the column and it is better to use it if ur data has a fix size and use VARCHAR if ur data size varies. But if it gives u the max of the size of the column of all the data of this col, isn't it better to use it when ur data size varies? Esp if u don't know how big is ur data size gg to be. VARCHAR needs to specify the size (CHAR don't really need right?), isn't it more troublesome?

  Read the article

• how to read specific number of floats from file in python?

  - by sahel

  I am reading a text file from the web. The file starts with some header lines containing the number of data points, followed the actual vertices (3 coordinates each). The file looks like: # comment HEADER TEXT POINTS 6 float 1.1 2.2 3.3 4.4 5.5 6.6 7.7 8.8 9.9 1.1 2.2 3.3 4.4 5.5 6.6 7.7 8.8 9.9 POLYGONS the line starting with the word POINTS contains the number of vertices (in this case we have 3 vertices per line, but that could change) This is how I am reading it right now: ur=urlopen("http://.../file.dat") j=0 contents = [] while 1: line = ur.readline() if not line: break else: line=line.lower() if 'points' in line : myline=line.strip() word=myline.split() node_number=int(word[1]) node_type=word[2] while 'polygons' not in line : line = ur.readline() line=line.lower() myline=line.split() i=0 while(i<len(myline)): contents[j]=float(myline[i]) i=i+1 j=j+1 How can I read a specified number of floats instead of reading line by line as strings and converting to floating numbers? Instead of ur.readline() I want to read the specified number of elements in the file Any suggestion is welcome..

  Read the article

• is there a website that lets you copie videos from any website? [closed]

  - by spider151

  i want a website that lets you copy any video and put it on ur phone

  Read the article

• Can't recognize local webserver

  - by Syed Khalil-ur-Rehman

  My Internet Cable provider has set up a web server which hosts different entertainment material like movies, songs, tv shows and games etc. While using windows the pc recognises it as a local web server and downloads files with full LAN speed of 10 mb per second. On the contrary when using Ubuntu I am only able to download the files on my Internet speed not more than 100 kb per second. What ever I try ubuntu does not recognizes the webserver as a local area network web server but as a normal internet website. How to make Ubuntu download files from this server with full LAN speed. Please help in this regard. The url is http://dmasti.pk and yes it is a web server browsable by a web browser like firefox or ie.

  Read the article

• Ubuntu does not recognized local webserver

  - by Syed Khalil-ur-Rehman

  My Internet Cable provider has set up a web server which hosts different entertainment material like movies, songs, tv shows and games etc. While using windows the pc recognises it as a local web server and downloads files with full LAN speed of 10 mb per second. On the contrary when using Ubuntu I am only able to download the files on my Internet speed not more than 100 kb per second. What ever I try ubuntu does not recognizes the webserver as a local area network web server but as a normal internet website. How to make Ubuntu download files from this server with full LAN speed. Please help in this regard.

  Read the article

• Positioning problem in VIsta when Aero Theme is enabled

  - by Adeel Rehman

  Hi, I have a Windows form which has tab pages. On a Tab Page, I have a Combo Box. When I click the combobox a drop down opens up just below the combo box to give the impression of a drop down. The drop down is a windows form and this is how I set its position Popup.Location = control.PointToScreen(parentcontrol.PointToClient(new System.Drawing.Point(0, control.Height))); Popup = drop down that opens below the combo box (Windows Form) control = my combo box (Combo Box) parentcontrol = the windows form on which the control is present (Parent Form) Problem:- The X coordinate is not plotted correctly on the screen with Aero theme enabled. This works perfectly fine on XP (with some variance in y due to tablelayout panel i assume). But when i use the same code on Vista with Aero theme enabled the x-cordinate wanders away about 20-30 pixels. If I Turn Aero theme off on Vista, it works fine. I have found the X and Y coordiantes calculated in both cases are the same. But the way Vista draws these coordinates on the screen (when aero theme is enabled) is different. Is there any solution to this problem? Thanks, Adeel Rehman.

  Read the article

• Oracle Solaris 11 ZFS Lab for Openworld 2012

  - by user12626122

  Preface This is the content from the Oracle Openworld 2012 ZFS lab. It was well attended - the feedback was that it was a little short - thats probably because in writing it I bacame very time-concious after the ASM/ACFS on Solaris extravaganza I ran last year which was almost too long for mortal man to finish in the 1 hour session. Enjoy. Table of Contents Exercise Z.1: ZFS Pools Exercise Z.2: ZFS File Systems Exercise Z.3: ZFS Compression Exercise Z.4: ZFS Deduplication Exercise Z.5: ZFS Encryption Exercise Z.6: Solaris 11 Shadow Migration Introduction This set of exercises is designed to briefly demonstrate new features in Solaris 11 ZFS file system: Deduplication, Encryption and Shadow Migration. Also included is the creation of zpools and zfs file systems - the basic building blocks of the technology, and also Compression which is the compliment of Deduplication. The exercises are just introductions - you are referred to the ZFS Adminstration Manual for further information. From Solaris 11 onward the online manual pages consist of zpool(1M) and zfs(1M) with further feature-specific information in zfs_allow(1M), zfs_encrypt(1M) and zfs_share(1M). The lab is easily carried out in a VirtualBox running Solaris 11 with 6 virtual 3 Gb disks to play with. Exercise Z.1: ZFS Pools Task: You have several disks to use for your new file system. Create a new zpool and a file system within it. Lab: You will check the status of existing zpools, create your own pool and expand it. Your Solaris 11 installation already has a root ZFS pool. It contains the root file system. Check this: root@solaris:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 15.9G 6.62G 9.25G 41% 1.00x ONLINE - root@solaris:~# zpool status pool: rpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c3t0d0s0 ONLINE 0 0 0 errors: No known data errors Note the disk device the root pool is on - c3t0d0s0 Now you will create your own ZFS pool. First you will check what disks are available: root@solaris:~# echo | format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c3t0d0 <ATA-VBOX HARDDISK-1.0 cyl 2085 alt 2 hd 255 sec 63> /pci@0,0/pci8086,2829@d/disk@0,0 1. c3t2d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@2,0 2. c3t3d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@3,0 3. c3t4d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@4,0 4. c3t5d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@5,0 5. c3t6d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@6,0 6. c3t7d0 <ATA-VBOX HARDDISK-1.0 cyl 1534 alt 2 hd 128 sec 32> /pci@0,0/pci8086,2829@d/disk@7,0 Specify disk (enter its number): Specify disk (enter its number): The root disk is numbered 0. The others are free for use. Try creating a simple pool and observe the error message: root@solaris:~# zpool create mypool c3t2d0 c3t3d0 'mypool' successfully created, but with no redundancy; failure of one device will cause loss of the pool So destroy that pool and create a mirrored pool instead: root@solaris:~# zpool destroy mypool root@solaris:~# zpool create mypool mirror c3t2d0 c3t3d0 root@solaris:~# zpool status mypool pool: mypool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM mypool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c3t2d0 ONLINE 0 0 0 c3t3d0 ONLINE 0 0 0 errors: No known data errors Back to topExercise Z.2: ZFS File Systems Task: You have to create file systems for later exercises. You can see that when a pool is created, a file system of the same name is created: root@solaris:~# zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 86.5K 2.94G 31K /mypool Create your filesystems and mountpoints as follows: root@solaris:~# zfs create -o mountpoint=/data1 mypool/mydata1 The -o option sets the mount point and automatically creates the necessary directory. root@solaris:~# zfs list mypool/mydata1 NAME USED AVAIL REFER MOUNTPOINT mypool/mydata1 31K 2.94G 31K /data1 Back to top Exercise Z.3: ZFS Compression Task:Try out different forms of compression available in ZFS Lab:Create 2nd filesystem with compression, fill both file systems with the same data, observe results You can see from the zfs(1) manual page that there are several types of compression available to you, set with the property=value syntax: compression=on | off | lzjb | gzip | gzip-N | zle Controls the compression algorithm used for this dataset. The lzjb compression algorithm is optimized for performance while providing decent data compression. Setting compression to on uses the lzjb compression algorithm. The gzip compression algorithm uses the same compression as the gzip(1) command. You can specify the gzip level by using the value gzip-N where N is an integer from 1 (fastest) to 9 (best compression ratio). Currently, gzip is equivalent to gzip-6 (which is also the default for gzip(1)). Create a second filesystem with compression turned on. Note how you set and get your values separately: root@solaris:~# zfs create -o mountpoint=/data2 mypool/mydata2 root@solaris:~# zfs set compression=gzip-9 mypool/mydata2 root@solaris:~# zfs get compression mypool/mydata1 NAME PROPERTY VALUE SOURCE mypool/mydata1 compression off default root@solaris:~# zfs get compression mypool/mydata2 NAME PROPERTY VALUE SOURCE mypool/mydata2 compression gzip-9 local Now you can copy the contents of /usr/lib into both your normal and compressing filesystem and observe the results. Don't forget the dot or period (".") in the find(1) command below: root@solaris:~# cd /usr/lib root@solaris:/usr/lib# find . -print | cpio -pdv /data1 root@solaris:/usr/lib# find . -print | cpio -pdv /data2 The copy into the compressing file system takes longer - as it has to perform the compression but the results show the effect: root@solaris:/usr/lib# zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 1.35G 1.59G 31K /mypool mypool/mydata1 1.01G 1.59G 1.01G /data1 mypool/mydata2 341M 1.59G 341M /data2 Note that the available space in the pool is shared amongst the file systems. This behavior can be modified using quotas and reservations which are not covered in this lab but are covered extensively in the ZFS Administrators Guide. Back to top Exercise Z.4: ZFS Deduplication The deduplication property is used to remove redundant data from a ZFS file system. With the property enabled duplicate data blocks are removed synchronously. The result is that only unique data is stored and common componenents are shared. Task:See how to implement deduplication and its effects Lab: You will create a ZFS file system with deduplication turned on and see if it reduces the amount of physical storage needed when we again fill it with a copy of /usr/lib. root@solaris:/usr/lib# zfs destroy mypool/mydata2 root@solaris:/usr/lib# zfs set dedup=on mypool/mydata1 root@solaris:/usr/lib# rm -rf /data1/* root@solaris:/usr/lib# mkdir /data1/2nd-copy root@solaris:/usr/lib# zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 1.02M 2.94G 31K /mypool mypool/mydata1 43K 2.94G 43K /data1 root@solaris:/usr/lib# find . -print | cpio -pd /data1 2142768 blocks root@solaris:/usr/lib# zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 1.02G 1.99G 31K /mypool mypool/mydata1 1.01G 1.99G 1.01G /data1 root@solaris:/usr/lib# find . -print | cpio -pd /data1/2nd-copy 2142768 blocks root@solaris:/usr/lib#zfs list NAME USED AVAIL REFER MOUNTPOINT mypool 1.99G 1.96G 31K /mypool mypool/mydata1 1.98G 1.96G 1.98G /data1 You could go on creating copies for quite a while...but you get the idea. Note that deduplication and compression can be combined: the compression acts on metadata. Deduplication works across file systems in a pool and there is a zpool-wide property dedupratio: root@solaris:/usr/lib# zpool get dedupratio mypool NAME PROPERTY VALUE SOURCE mypool dedupratio 4.30x - Deduplication can also be checked using "zpool list": root@solaris:/usr/lib# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT mypool 2.98G 1001M 2.01G 32% 4.30x ONLINE - rpool 15.9G 6.66G 9.21G 41% 1.00x ONLINE - Before moving on to the next topic, destroy that dataset and free up some space: root@solaris:~# zfs destroy mypool/mydata1 Back to top Exercise Z.5: ZFS Encryption Task: Encrypt sensitive data. Lab: Explore basic ZFS encryption. This lab only covers the basics of ZFS Encryption. In particular it does not cover various aspects of key management. Please see the ZFS Adminastrion Manual and the zfs_encrypt(1M) manual page for more detail on this functionality. Back to top root@solaris:~# zfs create -o encryption=on mypool/data2 Enter passphrase for 'mypool/data2': ******** Enter again: ******** root@solaris:~# Creation of a descendent dataset shows that encryption is inherited from the parent: root@solaris:~# zfs create mypool/data2/data3 root@solaris:~# zfs get -r encryption,keysource,keystatus,checksum mypool/data2 NAME PROPERTY VALUE SOURCE mypool/data2 encryption on local mypool/data2 keysource passphrase,prompt local mypool/data2 keystatus available - mypool/data2 checksum sha256-mac local mypool/data2/data3 encryption on inherited from mypool/data2 mypool/data2/data3 keysource passphrase,prompt inherited from mypool/data2 mypool/data2/data3 keystatus available - mypool/data2/data3 checksum sha256-mac inherited from mypool/data2 You will find the online manual page zfs_encrypt(1M) contains examples. In particular, if time permits during this lab session you may wish to explore the changing of a key using "zfs key -c mypool/data2". Exercise Z.6: Shadow Migration Shadow Migration allows you to migrate data from an old file system to a new file system while simultaneously allowing access and modification to the new file system during the process. You can use Shadow Migration to migrate a local or remote UFS or ZFS file system to a local file system. Task: You wish to migrate data from one file system (UFS, ZFS, VxFS) to ZFS while mainaining access to it. Lab: Create the infrastructure for shadow migration and transfer one file system into another. First create the file system you want to migrate root@solaris:~# zpool create oldstuff c3t4d0 root@solaris:~# zfs create oldstuff/forgotten Then populate it with some files: root@solaris:~# cd /var/adm root@solaris:/var/adm# find . -print | cpio -pdv /oldstuff/forgotten You need the shadow-migration package installed: root@solaris:~# pkg install shadow-migration Packages to install: 1 Create boot environment: No Create backup boot environment: No Services to change: 1 DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 14/14 0.2/0.2 PHASE ACTIONS Install Phase 39/39 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 You then enable the shadowd service: root@solaris:~# svcadm enable shadowd root@solaris:~# svcs shadowd STATE STIME FMRI online 7:16:09 svc:/system/filesystem/shadowd:default Set the filesystem to be migrated to read-only root@solaris:~# zfs set readonly=on oldstuff/forgotten Create a new zfs file system with the shadow property set to the file system to be migrated: root@solaris:~# zfs create -o shadow=file:///oldstuff/forgotten mypool/remembered Use the shadowstat(1M) command to see the progress of the migration: root@solaris:~# shadowstat EST BYTES BYTES ELAPSED DATASET XFRD LEFT ERRORS TIME mypool/remembered 92.5M - - 00:00:59 mypool/remembered 99.1M 302M - 00:01:09 mypool/remembered 109M 260M - 00:01:19 mypool/remembered 133M 304M - 00:01:29 mypool/remembered 149M 339M - 00:01:39 mypool/remembered 156M 86.4M - 00:01:49 mypool/remembered 156M 8E 29 (completed) Note that if you had created /mypool/remembered as encrypted, this would be the preferred method of encrypting existing data. Similarly for compressing or deduplicating existing data. The procedure for migrating a file system over NFS is similar - see the ZFS Administration manual. That concludes this lab session.

  Read the article

• How to setup Java-Home and Path in Ubuntu 12.04

  - by ur truly friend

  we are new to Ubuntu.Recently we changed my server OS to ubuntu 12.04 from windows 7 . every one have their own login details. one of my college installed Open-Jdk7. I asked him, where you installed JAVA, then he suggested to switch the following directory su root cd /usr/lib/Jvm Totally 3 folders are there in JVM folder. names are. java-1.7.0-openjdk-amd64 java-7-openjdk-amd64 java-7-openjdk-common generally, If you install Java in Windows, we will get 2 folder. 1 folder is for JDKand another points to JRE. but, in Ubuntu we have 3 folders. is it right? for my conformation, whether he installed correctly or not. I open Terminal. I run the following 2 commands javac java -version both commands are working fine. now I want to set-up Java-Home and Path for all users at same place.because everyone is working on Application server. Can anyone explain step-by-step. Thanks.

  Read the article

• MacBook Pro Late 2009 SATA Resets, Slowness

  - by A Student at a University

  My MacBook Pro runs slower the longer it's on. I am getting kernel warnings. The resets correlate with AC power connects and disconnects. I don't know if the warnings do. (How do I tell?) Are these bus CRC errors? Or something else? Can this damage the drive or corrupt data? What is it seeing that motivates these? 02:37:16 :[ 0.791992] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 02:37:16 :[ 0.792053] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP 02:37:16 :[ 0.792104] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 1.5 Gbps 0x3 impl IDE mode 02:37:16 :[ 0.792107] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh 02:37:16 :[ 0.813473] scsi0 : ahci 02:37:16 :[ 0.823340] scsi1 : ahci 02:37:16 :[ 0.848164] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 43 02:37:16 :[ 0.848166] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 43 02:37:16 :[ 1.190132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16 :[ 1.190153] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16 :[ 1.213568] ata1.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133 02:37:16 :[ 1.213572] ata1.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32) 02:37:16 :[ 1.227293] ata2.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133 02:37:16 :[ 1.227297] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) 02:37:16 :[ 1.229570] ata2.00: configured for UDMA/133 02:37:16 :[ 1.240133] ata2: hard resetting link 02:37:16 :[ 1.260738] ata1.00: configured for UDMA/133 02:37:16 :[ 1.280122] ata1: hard resetting link 02:37:16 :[ 1.470125] usb 2-5: new high speed USB device using ehci_hcd and address 3 02:37:16 :[ 1.550165] firewire_core: created device fw0: GUID 58b035fffea99f5c, S800 02:37:16 :[ 1.631306] Initializing USB Mass Storage driver... 02:37:16 :[ 1.631392] scsi6 : usb-storage 2-5:1.0 02:37:16 :[ 1.631454] usbcore: registered new interface driver usb-storage 02:37:16 :[ 1.631455] USB Mass Storage support registered. 02:37:16 :[ 1.960128] usb 4-1: new full speed USB device using ohci_hcd and address 2 02:37:16 :[ 1.990101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16 :[ 1.994215] ata2.00: configured for UDMA/133 02:37:16 :[ 1.994220] ata2: EH complete 02:37:16 :[ 2.030097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16 :[ 2.090773] ata1.00: configured for UDMA/133 02:37:16 :[ 2.090778] ata1: EH complete 02:37:16 :[ 2.090931] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.23 PQ: 0 ANSI: 5 02:37:16 :[ 2.091045] sd 0:0:0:0: Attached scsi generic sg0 type 0 02:37:16 :[ 2.091121] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) 02:37:16 :[ 2.091159] scsi 1:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5 02:37:16 :[ 2.091163] sd 0:0:0:0: [sda] Write Protect is off 02:37:16 :[ 2.091183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16 :[ 2.091252] sd 1:0:0:0: Attached scsi generic sg1 type 0 02:37:16 :[ 2.091337] sda: 02:37:16 :[ 2.091446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) 02:37:16 :[ 2.091580] sd 1:0:0:0: [sdb] Write Protect is off 02:37:16 :[ 2.091637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16 :[ 2.091756] sdb: sda1 sda2 02:37:16 :[ 2.093140] sd 0:0:0:0: [sda] Attached SCSI disk 02:37:16 :[ 2.093505] sdb1 sdb2 sdb3 02:37:16 :[ 2.093773] sd 1:0:0:0: [sdb] Attached SCSI disk 02:37:16 :[ 2.693899] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 02:37:16 :[ 5.483492] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro 02:37:16 :[ 7.905040] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) 02:37:25 :[ 19.553095] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:25 :[ 19.555266] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:25 :[ 19.641533] ata1: hard resetting link 02:37:25 :[ 19.642084] ata2: hard resetting link 02:37:26 :[ 20.392606] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26 :[ 20.392610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26 :[ 20.396697] ata2.00: configured for UDMA/133 02:37:26 :[ 20.396703] ata2: EH complete 02:37:26 :[ 20.451491] ata1.00: configured for UDMA/133 02:37:26 :[ 20.451498] ata1: EH complete 02:37:30 :[ 24.563725] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:30 :[ 24.565939] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:30 :[ 24.627246] ata1: hard resetting link 02:37:30 :[ 24.632250] ata2: hard resetting link 02:37:31 :[ 25.372582] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31 :[ 25.382615] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31 :[ 25.386782] ata2.00: configured for UDMA/133 02:37:31 :[ 25.386788] ata2: EH complete 02:37:31 :[ 25.431668] ata1.00: configured for UDMA/133 02:37:31 :[ 25.431674] ata1: EH complete 02:45:54 :[ 529.141844] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:55 :[ 529.544529] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:55 :[ 529.622561] ata1: limiting SATA link speed to 1.5 Gbps 02:45:55 :[ 529.622583] ata1: hard resetting link 02:45:55 :[ 529.622609] ata2: limiting SATA link speed to 1.5 Gbps 02:45:55 :[ 529.622624] ata2: hard resetting link 02:45:56 :[ 530.380135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56 :[ 530.380157] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56 :[ 530.384305] ata2.00: configured for UDMA/133 02:45:56 :[ 530.384314] ata2: EH complete 02:45:56 :[ 530.399225] ata1.00: configured for UDMA/133 02:45:56 :[ 530.399233] ata1: EH complete 02:45:58 :[ 532.395990] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:45:58 :[ 532.518270] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:45:58 :[ 532.590983] ata1: hard resetting link 02:45:58 :[ 532.591045] ata2: hard resetting link 02:45:59 :[ 533.340147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59 :[ 533.340168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59 :[ 533.344416] ata2.00: configured for UDMA/133 02:45:59 :[ 533.344424] ata2: EH complete 02:45:59 :[ 533.360839] ata1.00: configured for UDMA/133 02:45:59 :[ 533.360847] ata1: EH complete 02:45:59 :[ 533.584449] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:59 :[ 533.586999] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:59 :[ 533.660132] ata2: hard resetting link 02:45:59 :[ 533.660151] ata1: hard resetting link 02:46:00 :[ 534.412536] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00 :[ 534.412562] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00 :[ 534.416768] ata2.00: configured for UDMA/133 02:46:00 :[ 534.416777] ata2: EH complete 02:46:00 :[ 534.431396] ata1.00: configured for UDMA/133 02:46:00 :[ 534.431401] ata1: EH complete 02:46:03 :[ 537.384649] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:03 :[ 537.504214] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:03 :[ 537.586002] ata1: hard resetting link 02:46:03 :[ 537.586036] ata2: hard resetting link 02:46:04 :[ 538.330147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04 :[ 538.330168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04 :[ 538.334389] ata2.00: configured for UDMA/133 02:46:04 :[ 538.334398] ata2: EH complete 02:46:04 :[ 538.343511] ata1.00: configured for UDMA/133 02:46:04 :[ 538.343519] ata1: EH complete 02:46:04 :[ 538.456413] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:04 :[ 538.459404] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:04 :[ 538.540138] ata1.00: limiting speed to UDMA/100:PIO4 02:46:04 :[ 538.540159] ata1: hard resetting link 02:46:04 :[ 538.540202] ata2.00: limiting speed to UDMA/100:PIO4 02:46:04 :[ 538.540220] ata2: hard resetting link 02:46:05 :[ 539.290054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05 :[ 539.290041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05 :[ 539.294100] ata2.00: configured for UDMA/100 02:46:05 :[ 539.294106] ata2: EH complete 02:46:05 :[ 539.314125] ata1.00: configured for UDMA/100 02:46:05 :[ 539.314132] ------------[ cut here ]------------ 02:46:05 :[ 539.314140] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:05 :[ 539.314144] Hardware name: MacBookPro5,3 02:46:05 :[ 539.314146] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:05 :[ 539.314221] Pid: 202, comm: scsi_eh_0 Tainted: P 2.6.35-25-generic #44-Ubuntu 02:46:05 :[ 539.314224] Call Trace: 02:46:05 :[ 539.314233] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:05 :[ 539.314237] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:05 :[ 539.314242] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:05 :[ 539.314246] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:05 :[ 539.314256] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:05 :[ 539.314261] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:05 :[ 539.314266] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:05 :[ 539.314270] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:05 :[ 539.314275] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:05 :[ 539.314280] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:05 :[ 539.314284] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:05 :[ 539.314288] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:05 :[ 539.314291] ---[ end trace 76dbffc2d5d49d9b ]--- 02:46:05 :[ 539.314296] ata1: EH complete 02:46:12 :[ 547.040117] ata1: hard resetting link 02:46:13 :[ 547.390144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:13 :[ 547.408430] ata1.00: configured for UDMA/100 02:46:13 :[ 547.408438] ------------[ cut here ]------------ 02:46:13 :[ 547.408447] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:13 :[ 547.408451] Hardware name: MacBookPro5,3 02:46:13 :[ 547.408453] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:13 :[ 547.408528] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 02:46:13 :[ 547.408531] Call Trace: 02:46:13 :[ 547.408540] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:13 :[ 547.408544] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:13 :[ 547.408549] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:13 :[ 547.408553] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:13 :[ 547.408563] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:13 :[ 547.408567] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:13 :[ 547.408572] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:13 :[ 547.408577] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:13 :[ 547.408582] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:13 :[ 547.408587] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:13 :[ 547.408591] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:13 :[ 547.408595] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:13 :[ 547.408598] ---[ end trace 76dbffc2d5d49d9c ]--- 02:46:13 :[ 547.408620] ata1: EH complete 02:46:13 :[ 547.562470] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:13 :[ 547.671380] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:13 :[ 547.738198] ata1.00: limiting speed to UDMA/33:PIO4 02:46:13 :[ 547.738218] ata1: hard resetting link 02:46:13 :[ 547.738274] ata2: hard resetting link 02:46:14 :[ 548.482561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14 :[ 548.484083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14 :[ 548.486809] ata2.00: configured for UDMA/100 02:46:14 :[ 548.486818] ata2: EH complete 02:46:14 :[ 548.498998] ata1.00: configured for UDMA/33 02:46:14 :[ 548.499004] ata1: EH complete 02:46:18 :[ 552.410499] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:18 :[ 552.522521] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:18 :[ 552.529684] ata1: hard resetting link 02:46:18 :[ 552.529723] ata2: hard resetting link 02:46:19 :[ 553.280059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19 :[ 553.280068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19 :[ 553.284141] ata2.00: configured for UDMA/100 02:46:19 :[ 553.284150] ata2: EH complete 02:46:19 :[ 553.301629] ata1.00: configured for UDMA/33 02:46:19 :[ 553.301637] ata1: EH complete 02:46:21 :[ 556.078830] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:21 :[ 556.180361] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:22 :[ 556.262612] ata1: hard resetting link 02:46:22 :[ 556.262617] ata2: hard resetting link 02:46:22 :[ 557.010050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:22 :[ 557.010070] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:22 :[ 557.014069] ata2.00: configured for UDMA/100 02:46:22 :[ 557.014075] ata2: EH complete 02:46:22 :[ 557.023646] ata1.00: configured for UDMA/33 02:46:22 :[ 557.023654] ata1: EH complete 02:46:30 :[ 565.047438] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:30 :[ 565.051554] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:30 :[ 565.108332] ata1: hard resetting link 02:46:30 :[ 565.108389] ata2.00: limiting speed to UDMA/33:PIO4 02:46:30 :[ 565.108406] ata2: hard resetting link 02:46:31 :[ 565.850048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:31 :[ 565.850068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:31 :[ 565.854304] ata2.00: configured for UDMA/33 02:46:31 :[ 565.854313] ata2: EH complete 02:46:31 :[ 565.868477] ata1.00: configured for UDMA/33 02:46:31 :[ 565.868485] ata1: EH complete 02:46:35 :[ 569.265469] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:35 :[ 569.268139] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:35 :[ 569.340079] ata1: hard resetting link 02:46:35 :[ 569.340113] ata2: hard resetting link 02:46:35 :[ 570.092568] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:35 :[ 570.092589] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:35 :[ 570.096828] ata2.00: configured for UDMA/33 02:46:35 :[ 570.096837] ata2: EH complete 02:46:35 :[ 570.110727] ata1.00: configured for UDMA/33 02:46:35 :[ 570.110735] ata1: EH complete 02:47:04 :[ 598.528232] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:47:04 :[ 598.653973] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:47:04 :[ 598.730854] ata1: hard resetting link 02:47:04 :[ 598.730910] ata2: hard resetting link 02:47:05 :[ 599.480136] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:47:05 :[ 599.480159] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:47:05 :[ 599.484206] ata2.00: configured for UDMA/33 02:47:05 :[ 599.484213] ata2: EH complete 02:47:05 :[ 599.496699] ata1.00: configured for UDMA/33 02:47:05 :[ 599.496707] ata1: EH complete 04:45:59 :[ 7733.756548] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 04:45:59 :[ 7733.882748] EXT4-fs (dm-2): re-mounted. Opts: commit=0 04:45:59 :[ 7733.960142] ata1: hard resetting link 04:45:59 :[ 7733.960189] ata2: hard resetting link 04:46:00 :[ 7734.701926] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 04:46:00 :[ 7734.719939] ata1.00: configured for UDMA/33 04:46:00 :[ 7734.719946] ata1: EH complete 04:46:00 :[ 7734.722547] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 04:46:00 :[ 7734.726652] ata2.00: configured for UDMA/33 04:46:00 :[ 7734.726659] ata2: EH complete 04:46:02 :[ 7736.656465] ACPI: EC: GPE storm detected, transactions will use polling mode 13:38:49 :[39704.188621] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 13:38:49 :[39704.280588] EXT4-fs (dm-2): re-mounted. Opts: commit=600 13:38:49 :[39704.360819] ata1: hard resetting link 13:38:49 :[39704.360882] ata2: hard resetting link 13:38:50 :[39705.112956] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 13:38:50 :[39705.114435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 13:38:50 :[39705.118673] ata2.00: configured for UDMA/33 13:38:50 :[39705.118682] ata2: EH complete 13:38:50 :[39705.127076] ata1.00: configured for UDMA/33 13:38:50 :[39705.127084] ata1: EH complete 13:39:49 :[39764.142463] applesmc: F1Mn: write arg fail 13:48:11 :[40267.025145] applesmc: FS! : read arg fail 13:52:53 :[40548.596735] applesmc: FS! : read arg fail 13:53:58 :[40613.972856] applesmc: FS! : read arg fail 13:54:08 :[40624.057339] applesmc: FS! : read arg fail 13:58:20 :[40875.397749] applesmc: TC0D: read data fail 14:16:56 :[41991.722054] applesmc: Th2H: read data fail 14:22:32 :[42327.991522] applesmc: light sensor data length set to 10 14:26:19 :[42554.788886] applesmc: F1Mn: write arg fail 14:32:36 :[42931.860443] applesmc: TC0F: read data fail 14:34:32 :[43048.041469] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 14:34:33 :[43048.185850] EXT4-fs (dm-2): re-mounted. Opts: commit=0 14:34:33 :[43048.270184] ata1: hard resetting link 14:34:33 :[43048.270224] ata2: hard resetting link 14:34:33 :[43049.030049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:33 :[43049.030065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:33 :[43049.034106] ata2.00: configured for UDMA/33 14:34:33 :[43049.034112] ata2: EH complete 14:34:33 :[43049.056952] ata1.00: configured for UDMA/33 14:34:33 :[43049.056959] ------------[ cut here ]------------ 14:34:33 :[43049.056968] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 14:34:33 :[43049.056971] Hardware name: MacBookPro5,3 14:34:33 :[43049.056973] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 14:34:33 :[43049.057048] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 14:34:33 :[43049.057052] Call Trace: 14:34:33 :[43049.057060] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 14:34:33 :[43049.057064] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 14:34:33 :[43049.057069] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 14:34:33 :[43049.057074] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 14:34:33 :[43049.057083] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 14:34:33 :[43049.057088] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 14:34:33 :[43049.057093] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 14:34:33 :[43049.057097] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 14:34:33 :[43049.057102] [<ffffffff8107f266>] kthread+0x96/0xa0 14:34:33 :[43049.057107] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 14:34:33 :[43049.057111] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 14:34:33 :[43049.057115] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 14:34:33 :[43049.057118] ---[ end trace 76dbffc2d5d49d9d ]--- 14:34:33 :[43049.057123] ata1: EH complete 14:34:41 :[43057.012698] ata1: hard resetting link 14:34:42 :[43057.362780] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:42 :[43057.381432] ata1.00: configured for UDMA/33 14:34:42 :[43057.381441] ------------[ cut here ]------------ 14:34:42 :[43057.381450] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 14:34:42 :[43057.381453] Hardware name: MacBookPro5,3 14:34:42 :[43057.381455] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 14:34:42 :[43057.381530] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 14:34:42 :[43057.381533] Call Trace: 14:34:42 :[43057.381542] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 14:34:42 :[43057.381546] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 14:34:42 :[43057.381551] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 14:34:42 :[43057.381556] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 14:34:42 :[43057.381565] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 14:34:42 :[43057.381569] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 14:34:42 :[43057.381575] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 14:34:42 :[43057.381579] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 14:34:42 :[43057.381584] [<ffffffff8107f266>] kthread+0x96/0xa0 14:34:42 :[43057.381589] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 14:34:42 :[43057.381594] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 14:34:42 :[43057.381598] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 14:34:42 :[43057.381601] ---[ end trace 76dbffc2d5d49d9e ]--- 14:34:42 :[43057.381624] ata1: EH complete 14:34:42 :[43057.557887] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 14:34:42 :[43057.560517] EXT4-fs (dm-2): re-mounted. Opts: commit=600 14:34:42 :[43057.621194] ata1: hard resetting link 14:34:42 :[43057.621252] ata2: hard resetting link 14:34:43 :[43058.370141] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:43 :[43058.370162] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:43 :[43058.374407] ata2.00: configured for UDMA/33 14:34:43 :[43058.374415] ata2: EH complete 14:34:43 :[43058.381989] ata1.00: configured for UDMA/33 14:34:43 :[43058.381996] ata1: EH complete 14:34:43 :[43058.616228] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 14:34:43 :[43058.618931] EXT4-fs (dm-2): re-mounted. Opts: commit=600 14:34:43 :[43058.626687] ata1: hard resetting link 14:34:43 :[43058.626731] ata2: hard resetting link 14:34:44 :[43059.372908] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:44 :[43059.372932] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:44 :[43059.376997] ata2.00: configured for UDMA/33 14:34:44 :[43059.377003] ata2: EH complete 14:34:44 :[43059.392576] ata1.00: configured for UDMA/33 14:34:44 :[43059.392585] ata1: EH complete 15:48:19 :[47474.710860] ata1: hard resetting link 15:48:19 :[47474.710882] ata2: hard resetting link 15:48:20 :[47475.460144] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 15:48:20 :[47475.460169] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 15:48:20 :[47475.473709] ata1.00: configured for UDMA/33 15:48:20 :[47475.473717] ata1: EH complete 15:48:20 :[47475.727960] ata2.00: configured for UDMA/33 15:48:20 :[47475.727969] ata2: EH complete 16:29:39 :[49954.295017] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 16:29:39 :[49954.622307] EXT4-fs (dm-2): re-mounted. Opts: commit=0 16:29:39 :[49954.710139] ata1: hard resetting link 16:29:39 :[49954.710174] ata2: hard resetting link 16:29:40 :[49955.460046] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 16:29:40 :[49955.460062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 16:29:40 :[49955.464138] ata2.00: configured for UDMA/33 16:29:40 :[49955.464144] ata2: EH complete 16:29:40 :[49955.473251] ata1.00: configured for UDMA/33 16:29:40 :[49955.473258] ata1: EH complete

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >