Search Results

Search found 445 results on 18 pages for 'ata ur rehman'.

Page 5/18 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Only One GPU Detected in the Nvidia Quadra NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • Why does the EFI shell not detect my Windows DVD?

    - by Oliver Salzburg
    I'm currently looking into (U)EFI for the first time and am already really confused. I insert the Windows Server 2008 R2 Enterprise disc into the DVD-ROM and boot into the EFI shell. The shell will automatically list all detected devices, which are: blk0 :CDRom - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master)/CDROM(Entry0) blk1 :BlockDevice - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master) To my understanding, it should have already detected the filesystem on blk0 and should have mounted it as fs0. Why is that not happening? If I insert a USB drive, it gets mounted just fine. The board is an Intel S5520HC in case that makes a difference.

    Read the article

  • Create XFS volume on /dev/sg* device

    - by cpt.Buggy
    Now I have couple of Supermicro 24x2Tb SATA servers and I have now idea how to get access to disks. I need to create XFS volume on each of them but really don't know how to do it, because fdisk doesn't see them. # sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST3250318AS CC38 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi1 channel=0 id=0 lun=0 [em] ATA ST3250318AS CC38 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi6 channel=1 id=8 lun=0 [em] Hitachi HDS722020ALA330 JKAO [rmb=0 cmdq=1 pqual=1 pdev=0x0] ... ... ... /dev/sg25: scsi6 channel=1 id=31 lun=0 [em] Hitachi HDS722020ALA330 JKAO [rmb=0 cmdq=1 pqual=1 pdev=0x0] /dev/sg26: scsi6 channel=3 id=0 lun=0 [em] LSILOGIC SASX36 A.1 7017 [rmb=0 cmdq=1 pqual=0 pdev=0xd] # sg_map /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 .. ... ... /dev/sg25 /dev/sg26 I can't use fdisk and mkfs, what should I do?

    Read the article

  • Only One GPU Detected in the Nvidia Quadro NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • How to mount a blu-ray drive?

    - by Stephan Schielke
    Maybe it is for the best to close this question. This has nothing to do with a bluray drive in general anymore. Probably a hardware defect. I will try to test it with a windows system and different cables again... Thx so far. I have a bluray/dvd/cdrom drive with SATA. Ubuntu wont find it under /dev/sd wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg2' rwrw-- : 'HL-DT-ST' 'BDDVDRW CH08LS10' ------------------------------------------------------------------------- cdrecord -scanbus scsibus2: 2,0,0 200) 'HL-DT-ST' 'BDDVDRW CH08LS10' '2.00' Removable CD-ROM fdisk dont even lists it. Ubuntu only automounts blank DVDs, but neither CDROM nor Blurays. I also changed the sata slot, sata cable and the power cable. The drive works with a windows system. This happens when I try to mount: sudo mount -t auto /dev/scd0 /media/bluray mount: you must specify the filesystem type I tried all filesystems there are. I also installed makemkv. It finds the drive but not the disc. Here is my /dev ls -al /dev total 12 drwxr-xr-x 17 root root 4420 2011-11-25 19:36 . drwxr-xr-x 28 root root 4096 2011-11-25 07:12 .. crw------- 1 root root 10, 235 2011-11-25 19:28 autofs -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab.old drwxr-xr-x 2 root root 700 2011-11-25 19:27 block drwxr-xr-x 2 root root 100 2011-11-25 19:27 bsg crw------- 1 root root 10, 234 2011-11-25 19:28 btrfs-control drwxr-xr-x 3 root root 60 2011-11-25 19:27 bus drwxr-xr-x 2 root root 3820 2011-11-25 19:28 char crw------- 1 root root 5, 1 2011-11-25 19:28 console lrwxrwxrwx 1 root root 11 2011-11-25 19:28 core -> /proc/kcore drwxr-xr-x 2 root root 60 2011-11-25 19:28 cpu crw------- 1 root root 10, 60 2011-11-25 19:28 cpu_dma_latency drwxr-xr-x 7 root root 140 2011-11-25 19:27 disk crw------- 1 root root 10, 61 2011-11-25 19:28 ecryptfs crw-rw---- 1 root video 29, 0 2011-11-25 19:28 fb0 lrwxrwxrwx 1 root root 13 2011-11-25 19:28 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 2011-11-25 19:28 full crw-rw-rw- 1 root fuse 10, 229 2011-11-25 19:28 fuse crw------- 1 root root 251, 0 2011-11-25 19:28 hidraw0 crw------- 1 root root 251, 1 2011-11-25 19:28 hidraw1 crw------- 1 root root 10, 228 2011-11-25 19:28 hpet lrwxrwxrwx 1 root root 14 2011-11-25 19:27 .initramfs -> /run/initramfs drwxr-xr-x 4 root root 220 2011-11-25 19:28 input crw------- 1 root root 1, 11 2011-11-25 19:28 kmsg srw-rw-rw- 1 root root 0 2011-11-25 19:28 log brw-rw---- 1 root disk 7, 0 2011-11-25 19:28 loop0 brw-rw---- 1 root disk 7, 1 2011-11-25 19:28 loop1 brw-rw---- 1 root disk 7, 2 2011-11-25 19:28 loop2 brw-rw---- 1 root disk 7, 3 2011-11-25 19:28 loop3 brw-rw---- 1 root disk 7, 4 2011-11-25 19:28 loop4 brw-rw---- 1 root disk 7, 5 2011-11-25 19:28 loop5 brw-rw---- 1 root disk 7, 6 2011-11-25 19:28 loop6 brw-rw---- 1 root disk 7, 7 2011-11-25 19:28 loop7 drwxr-xr-x 2 root root 60 2011-11-25 19:27 mapper crw------- 1 root root 10, 227 2011-11-25 19:28 mcelog crw-r----- 1 root kmem 1, 1 2011-11-25 19:28 mem drwxr-xr-x 2 root root 60 2011-11-25 19:27 net crw------- 1 root root 10, 59 2011-11-25 19:28 network_latency crw------- 1 root root 10, 58 2011-11-25 19:28 network_throughput crw-rw-rw- 1 root root 1, 3 2011-11-25 19:28 null crw-rw-rw- 1 root root 195, 0 2011-11-25 19:28 nvidia0 crw-rw-rw- 1 root root 195, 255 2011-11-25 19:28 nvidiactl crw------- 1 root root 1, 12 2011-11-25 19:28 oldmem crw-r----- 1 root kmem 1, 4 2011-11-25 19:28 port crw------- 1 root root 108, 0 2011-11-25 19:28 ppp crw------- 1 root root 10, 1 2011-11-25 19:28 psaux crw-rw-rw- 1 root tty 5, 2 2011-11-25 20:00 ptmx drwxr-xr-x 2 root root 0 2011-11-25 19:27 pts brw-rw---- 1 root disk 1, 0 2011-11-25 19:28 ram0 brw-rw---- 1 root disk 1, 1 2011-11-25 19:28 ram1 brw-rw---- 1 root disk 1, 10 2011-11-25 19:28 ram10 brw-rw---- 1 root disk 1, 11 2011-11-25 19:28 ram11 brw-rw---- 1 root disk 1, 12 2011-11-25 19:28 ram12 brw-rw---- 1 root disk 1, 13 2011-11-25 19:28 ram13 brw-rw---- 1 root disk 1, 14 2011-11-25 19:28 ram14 brw-rw---- 1 root disk 1, 15 2011-11-25 19:28 ram15 brw-rw---- 1 root disk 1, 2 2011-11-25 19:28 ram2 brw-rw---- 1 root disk 1, 3 2011-11-25 19:28 ram3 brw-rw---- 1 root disk 1, 4 2011-11-25 19:28 ram4 brw-rw---- 1 root disk 1, 5 2011-11-25 19:28 ram5 brw-rw---- 1 root disk 1, 6 2011-11-25 19:28 ram6 brw-rw---- 1 root disk 1, 7 2011-11-25 19:28 ram7 brw-rw---- 1 root disk 1, 8 2011-11-25 19:28 ram8 brw-rw---- 1 root disk 1, 9 2011-11-25 19:28 ram9 crw-rw-rw- 1 root root 1, 8 2011-11-25 19:28 random crw-rw-r--+ 1 root root 10, 62 2011-11-25 19:28 rfkill lrwxrwxrwx 1 root root 4 2011-11-25 19:28 rtc -> rtc0 crw------- 1 root root 254, 0 2011-11-25 19:28 rtc0 lrwxrwxrwx 1 root root 3 2011-11-25 19:38 scd0 -> sr0 brw-rw---- 1 root disk 8, 0 2011-11-25 19:28 sda brw-rw---- 1 root disk 8, 1 2011-11-25 19:28 sda1 brw-rw---- 1 root disk 8, 2 2011-11-25 19:28 sda2 brw-rw---- 1 root disk 8, 3 2011-11-25 19:28 sda3 brw-rw---- 1 root disk 8, 5 2011-11-25 19:28 sda5 brw-rw---- 1 root disk 8, 6 2011-11-25 19:28 sda6 brw-rw---- 1 root disk 8, 16 2011-11-25 19:28 sdb brw-rw---- 1 root disk 8, 17 2011-11-25 19:28 sdb1 crw-rw---- 1 root disk 21, 0 2011-11-25 19:28 sg0 crw-rw---- 1 root disk 21, 1 2011-11-25 19:28 sg1 crw-rw----+ 1 root cdrom 21, 2 2011-11-25 19:28 sg2 lrwxrwxrwx 1 root root 8 2011-11-25 19:28 shm -> /run/shm crw------- 1 root root 10, 231 2011-11-25 19:28 snapshot drwxr-xr-x 4 root root 280 2011-11-25 19:28 snd brw-rw----+ 1 root cdrom 11, 0 2011-11-25 19:38 sr0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 2011-11-25 19:35 tty crw--w---- 1 root tty 4, 0 2011-11-25 19:28 tty0 crw------- 1 root root 4, 1 2011-11-25 19:28 tty1 crw--w---- 1 root tty 4, 10 2011-11-25 19:28 tty10 crw--w---- 1 root tty 4, 11 2011-11-25 19:28 tty11 crw--w---- 1 root tty 4, 12 2011-11-25 19:28 tty12 crw--w---- 1 root tty 4, 13 2011-11-25 19:28 tty13 crw--w---- 1 root tty 4, 14 2011-11-25 19:28 tty14 crw--w---- 1 root tty 4, 15 2011-11-25 19:28 tty15 crw--w---- 1 root tty 4, 16 2011-11-25 19:28 tty16 crw--w---- 1 root tty 4, 17 2011-11-25 19:28 tty17 crw--w---- 1 root tty 4, 18 2011-11-25 19:28 tty18 crw--w---- 1 root tty 4, 19 2011-11-25 19:28 tty19 crw------- 1 root root 4, 2 2011-11-25 19:28 tty2 crw--w---- 1 root tty 4, 20 2011-11-25 19:28 tty20 crw--w---- 1 root tty 4, 21 2011-11-25 19:28 tty21 crw--w---- 1 root tty 4, 22 2011-11-25 19:28 tty22 crw--w---- 1 root tty 4, 23 2011-11-25 19:28 tty23 crw--w---- 1 root tty 4, 24 2011-11-25 19:28 tty24 crw--w---- 1 root tty 4, 25 2011-11-25 19:28 tty25 crw--w---- 1 root tty 4, 26 2011-11-25 19:28 tty26 crw--w---- 1 root tty 4, 27 2011-11-25 19:28 tty27 crw--w---- 1 root tty 4, 28 2011-11-25 19:28 tty28 crw--w---- 1 root tty 4, 29 2011-11-25 19:28 tty29 crw------- 1 root root 4, 3 2011-11-25 19:28 tty3 crw--w---- 1 root tty 4, 30 2011-11-25 19:28 tty30 crw--w---- 1 root tty 4, 31 2011-11-25 19:28 tty31 crw--w---- 1 root tty 4, 32 2011-11-25 19:28 tty32 crw--w---- 1 root tty 4, 33 2011-11-25 19:28 tty33 crw--w---- 1 root tty 4, 34 2011-11-25 19:28 tty34 crw--w---- 1 root tty 4, 35 2011-11-25 19:28 tty35 crw--w---- 1 root tty 4, 36 2011-11-25 19:28 tty36 crw--w---- 1 root tty 4, 37 2011-11-25 19:28 tty37 crw--w---- 1 root tty 4, 38 2011-11-25 19:28 tty38 crw--w---- 1 root tty 4, 39 2011-11-25 19:28 tty39 crw------- 1 root root 4, 4 2011-11-25 19:28 tty4 crw--w---- 1 root tty 4, 40 2011-11-25 19:28 tty40 crw--w---- 1 root tty 4, 41 2011-11-25 19:28 tty41 crw--w---- 1 root tty 4, 42 2011-11-25 19:28 tty42 crw--w---- 1 root tty 4, 43 2011-11-25 19:28 tty43 crw--w---- 1 root tty 4, 44 2011-11-25 19:28 tty44 crw--w---- 1 root tty 4, 45 2011-11-25 19:28 tty45 crw--w---- 1 root tty 4, 46 2011-11-25 19:28 tty46 crw--w---- 1 root tty 4, 47 2011-11-25 19:28 tty47 crw--w---- 1 root tty 4, 48 2011-11-25 19:28 tty48 crw--w---- 1 root tty 4, 49 2011-11-25 19:28 tty49 crw------- 1 root root 4, 5 2011-11-25 19:28 tty5 crw--w---- 1 root tty 4, 50 2011-11-25 19:28 tty50 crw--w---- 1 root tty 4, 51 2011-11-25 19:28 tty51 crw--w---- 1 root tty 4, 52 2011-11-25 19:28 tty52 crw--w---- 1 root tty 4, 53 2011-11-25 19:28 tty53 crw--w---- 1 root tty 4, 54 2011-11-25 19:28 tty54 crw--w---- 1 root tty 4, 55 2011-11-25 19:28 tty55 crw--w---- 1 root tty 4, 56 2011-11-25 19:28 tty56 crw--w---- 1 root tty 4, 57 2011-11-25 19:28 tty57 crw--w---- 1 root tty 4, 58 2011-11-25 19:28 tty58 crw--w---- 1 root tty 4, 59 2011-11-25 19:28 tty59 crw------- 1 root root 4, 6 2011-11-25 19:28 tty6 crw--w---- 1 root tty 4, 60 2011-11-25 19:28 tty60 crw--w---- 1 root tty 4, 61 2011-11-25 19:28 tty61 crw--w---- 1 root tty 4, 62 2011-11-25 19:28 tty62 crw--w---- 1 root tty 4, 63 2011-11-25 19:28 tty63 crw--w---- 1 root tty 4, 7 2011-11-25 19:28 tty7 crw--w---- 1 root tty 4, 8 2011-11-25 19:28 tty8 crw--w---- 1 root tty 4, 9 2011-11-25 19:28 tty9 crw------- 1 root root 5, 3 2011-11-25 19:28 ttyprintk crw-rw---- 1 root dialout 4, 64 2011-11-25 19:28 ttyS0 crw-rw---- 1 root dialout 4, 65 2011-11-25 19:28 ttyS1 crw-rw---- 1 root dialout 4, 74 2011-11-25 19:28 ttyS10 crw-rw---- 1 root dialout 4, 75 2011-11-25 19:28 ttyS11 crw-rw---- 1 root dialout 4, 76 2011-11-25 19:28 ttyS12 crw-rw---- 1 root dialout 4, 77 2011-11-25 19:28 ttyS13 crw-rw---- 1 root dialout 4, 78 2011-11-25 19:28 ttyS14 crw-rw---- 1 root dialout 4, 79 2011-11-25 19:28 ttyS15 crw-rw---- 1 root dialout 4, 80 2011-11-25 19:28 ttyS16 crw-rw---- 1 root dialout 4, 81 2011-11-25 19:28 ttyS17 crw-rw---- 1 root dialout 4, 82 2011-11-25 19:28 ttyS18 crw-rw---- 1 root dialout 4, 83 2011-11-25 19:28 ttyS19 crw-rw---- 1 root dialout 4, 66 2011-11-25 19:28 ttyS2 crw-rw---- 1 root dialout 4, 84 2011-11-25 19:28 ttyS20 crw-rw---- 1 root dialout 4, 85 2011-11-25 19:28 ttyS21 crw-rw---- 1 root dialout 4, 86 2011-11-25 19:28 ttyS22 crw-rw---- 1 root dialout 4, 87 2011-11-25 19:28 ttyS23 crw-rw---- 1 root dialout 4, 88 2011-11-25 19:28 ttyS24 crw-rw---- 1 root dialout 4, 89 2011-11-25 19:28 ttyS25 crw-rw---- 1 root dialout 4, 90 2011-11-25 19:28 ttyS26 crw-rw---- 1 root dialout 4, 91 2011-11-25 19:28 ttyS27 crw-rw---- 1 root dialout 4, 92 2011-11-25 19:28 ttyS28 crw-rw---- 1 root dialout 4, 93 2011-11-25 19:28 ttyS29 crw-rw---- 1 root dialout 4, 67 2011-11-25 19:28 ttyS3 crw-rw---- 1 root dialout 4, 94 2011-11-25 19:28 ttyS30 crw-rw---- 1 root dialout 4, 95 2011-11-25 19:28 ttyS31 crw-rw---- 1 root dialout 4, 68 2011-11-25 19:28 ttyS4 crw-rw---- 1 root dialout 4, 69 2011-11-25 19:28 ttyS5 crw-rw---- 1 root dialout 4, 70 2011-11-25 19:28 ttyS6 crw-rw---- 1 root dialout 4, 71 2011-11-25 19:28 ttyS7 crw-rw---- 1 root dialout 4, 72 2011-11-25 19:28 ttyS8 crw-rw---- 1 root dialout 4, 73 2011-11-25 19:28 ttyS9 d rwxr-xr-x 3 root root 60 2011-11-25 19:28 .udev crw-r----- 1 root root 10, 223 2011-11-25 19:28 uinput crw-rw-rw- 1 root root 1, 9 2011-11-25 19:28 urandom drwxr-xr-x 2 root root 60 2011-11-25 19:27 usb crw------- 1 root root 252, 0 2011-11-25 19:28 usbmon0 crw------- 1 root root 252, 1 2011-11-25 19:28 usbmon1 crw------- 1 root root 252, 2 2011-11-25 19:28 usbmon2 crw------- 1 root root 252, 3 2011-11-25 19:28 usbmon3 crw------- 1 root root 252, 4 2011-11-25 19:28 usbmon4 crw------- 1 root root 252, 5 2011-11-25 19:28 usbmon5 crw------- 1 root root 252, 6 2011-11-25 19:28 usbmon6 crw------- 1 root root 252, 7 2011-11-25 19:28 usbmon7 crw------- 1 root root 252, 8 2011-11-25 19:28 usbmon8 drwxr-xr-x 4 root root 80 2011-11-25 19:28 v4l crw------- 1 root root 10, 57 2011-11-25 19:28 vboxdrv crw------- 1 root root 10, 56 2011-11-25 19:28 vboxnetctl drwxr-x--- 4 root vboxusers 80 2011-11-25 19:28 vboxusb crw-rw---- 1 root tty 7, 0 2011-11-25 19:28 vcs crw-rw---- 1 root tty 7, 1 2011-11-25 19:28 vcs1 crw-rw---- 1 root tty 7, 2 2011-11-25 19:28 vcs2 crw-rw---- 1 root tty 7, 3 2011-11-25 19:28 vcs3 crw-rw---- 1 root tty 7, 4 2011-11-25 19:28 vcs4 crw-rw---- 1 root tty 7, 5 2011-11-25 19:28 vcs5 crw-rw---- 1 root tty 7, 6 2011-11-25 19:28 vcs6 crw-rw---- 1 root tty 7, 128 2011-11-25 19:28 vcsa crw-rw---- 1 root tty 7, 129 2011-11-25 19:28 vcsa1 crw-rw---- 1 root tty 7, 130 2011-11-25 19:28 vcsa2 crw-rw---- 1 root tty 7, 131 2011-11-25 19:28 vcsa3 crw-rw---- 1 root tty 7, 132 2011-11-25 19:28 vcsa4 crw-rw---- 1 root tty 7, 133 2011-11-25 19:28 vcsa5 crw-rw---- 1 root tty 7, 134 2011-11-25 19:28 vcsa6 crw------- 1 root root 10, 63 2011-11-25 19:28 vga_arbiter crw-rw----+ 1 root video 81, 0 2011-11-25 19:28 video0 crw-rw-rw- 1 root root 1, 5 2011-11-25 19:28 zero sg_scan -i gives me: sudo sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST31000524NS SN12 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi0 channel=0 id=1 lun=0 [em] ATA WDC WD15EADS-00S 01.0 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi2 channel=0 id=0 lun=0 [em] HL-DT-ST BDDVDRW CH08LS10 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5] sg_map gives me: /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 /dev/scd0 lsscsi -l gives me: [0:0:0:0] disk ATA ST31000524NS SN12 /dev/sda state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [0:0:1:0] disk ATA WDC WD15EADS-00S 01.0 /dev/sdb state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [2:0:0:0] cd/dvd HL-DT-ST BDDVDRW CH08LS10 2.00 /dev/sr0 state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30 my udf mod is: filename: /lib/modules/3.0.0-14-generic/kernel/fs/udf/udf.ko license: GPL description: Universal Disk Format Filesystem author: Ben Fennema srcversion: 6ABDE012374D96B9685B8E5 depends: crc-itu-t vermagic: 3.0.0-14-generic SMP mod_unload modversions Do I need special drivers or mods enabled? Do I need to change some BIOS settings? edit: Somehow I am now able to fire the mount command without any filesystem errors, but now I get: mount: no medium found on /dev/sr0

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • mount another drive to the same directory

    - by Ken Autotron
    I recently purchased a server that was advertised as 2TB (2 1TB drives) in size, when I use it it reports only one of the drives, I would like to be able to use both as if one drive. here is the specs... sudo lshw -C disk *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/sda version: MS2O serial: 13EJ81XPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=0005b3dd *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb version: MS2O serial: 13OX3TKPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00030e86 and fdisk -l Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00030e86 Device Boot Start End Blocks Id System /dev/sdb1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sdb2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sdb3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005b3dd Device Boot Start End Blocks Id System /dev/sda1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sda2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sda3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/md2: 978.2 GB, 978187124736 bytes 2 heads, 4 sectors/track, 238815216 cylinders, total 1910521728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 21.5 GB, 21474770944 bytes 2 heads, 4 sectors/track, 5242864 cylinders, total 41942912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table is it possible to mount both drives to say /Home/ so I would have 2TB of usable space?

    Read the article

  • I can't install Ubuntu on my Dell Inspiron 15R at all

    - by Kieran Rimmer
    I'm attempting to install Ubuntu 12.04LTS, 64 bit onto a Dell Inspiron 15R laptop. I've shrunk down one of the windows partitions and even used gparted to format the vacant space as ext4. However, the install disk simply does not present any options when it comes to the partitioning step. What I get is a non-responsive blank table As well as the above, I've changed the BIOS settings so that USB emulation is disabled (as per Can't install on Dell Inspiron 15R), and changed the SATA Operation setting to all three possible options. Anyway, the install CD will bring up the trial version of ubuntu, and if I open terminal and type sudo fdisk -l, I get this: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xb4fd9215 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 29044735 14481408 7 HPFS/NTFS/exFAT /dev/sda3 29044736 1005142015 488048640 7 HPFS/NTFS/exFAT /dev/sda4 1005154920 1953520064 474182572+ 83 Linux Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb4fd923d Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive If I type 'sudo parted -l', I get: Model: ATA WDC WD10JPVT-75A (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 41.1MB 41.1MB primary fat16 diag 2 41.9MB 14.9GB 14.8GB primary ntfs boot 3 14.9GB 515GB 500GB primary ntfs 4 515GB 1000GB 486GB primary ext4 Model: ATA SAMSUNG SSD PM83 (scsi) Disk /dev/sdb: 32.0GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 8589MB 8588MB primary Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! I've also tried a Kubuntu 12.04 and Linuxmint install disks, wityh the same problem. I'm completely lost here. Cheers, Kieran

    Read the article

  • LiveCD Boot/Install

    - by Jon
    I have recently built a new computer and have been looking to dual-boot alongside Windows. Trying to boot/install off Ubuntu/Dedora/Arch live CDs has failed across all distros and I keep getting the error: [34.5173939] ata9.00: exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.517403] ata9: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.517413] ata9.00: failed command: READ FPDMA QUEUED [34.517420] ata9.00: cmd 60/08:00:00:6d:70/00:00:74:00:00/40 tag 0 ncq 4096 in [34.517420] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.517433] ata9.00: status: { DRDY } [34.667134] ata10.00 exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.667134] ata10: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.667153] ata10.00: failed command: IDENTIFY PACKET DEVICE [34.667159] ata10.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [34.667160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.667170] ata10.00: status: { DRDY } I am using a new ASUS Z77 Sabertooth motherboard with a Seagate Barracuda ST1000DM003 1TB 7200RPM hard drive. I am not entirely sure why I can't even boot off the live CD? Any ideas? Hi thanks for the quick response. All Distros were direct download from their respective websites, I have tried both CD boot with all distros and USB boot with Arch only. I have just updated my BIOS as well an am still receiving the same error. The fact that it happens on CD and USB tell's me it's not an optical drive issue. All information I can find on this seems to relate to hard drives failing on already installed linux boxes or faulty SATA cables. I am a bit confused why this issue would be preventing a CD/USB boot though. Is there any more info I can provide that might help uncover the source of the problem? Cheers, Jon

    Read the article

  • Ubuntu doesn't boot due to GRUB-Problems

    - by Dave
    Users out there, I came here with the spark of a hope, that you could help me. I want to get rid of my old WinXP, because the Game-Support for it seems to slowly expire now... So I took a second drive, just an old empty one I had at hands (ATA-Maxtor 90648D3), plugged of the other drive with WinXP, so that it couldn't be harmed, and started the installationof Ubuntu 12.04. Everything went as it was supposed to, until the end. Normal shutdown after successful installation process. But when I tried to boot my new Ubuntu from the HDD, it said: error: out of disk. grub rescue> So, what to do now? I already tried a lot of things in the terminal, e.g. the update-grub as mentioned on http://opensource-sidh.blogspot.de/2011/06/recover-grub-live-ubuntu-cd-pendrive.html. Everything worked, he didn't complain about a missing data or anything, but at the end of the day he still wasn't able to boot! Next step was to change the etc/default/grub-file, so that it could load the ATA-drivers first, so that there is now problem with my drive. But even this didn't seem to have any effect, I'm still stuck with Ubuntu in the Live-CD-Mode... If there was anybody to help me out there, I would be very glad. Thanks for any support, Dave P.S.: I even tried to fix it with boot-repair, a small tool for Ubuntu, and it created a file with data that could probably help you to help me. You can find it on http://paste.ubuntu.com/1428022/

    Read the article

  • Unable to mount an LVM Hard-drive after upgrade

    - by Bruce Staples
    I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

    Read the article

  • ksoftirqd uses 100% cpu

    - by andy
    I am running 32bit Ubuntu 10.04. A lot of the times ksoftirqd/0 or ksoftirqd/1 start using up 100% CPU for no apparent reason, and I am forced to reboot my laptop. Incidentally this also happens when I maximize my (youtube) videos on Chrome and Fireox, but once I un-maximize the videos the CPU usage goes down to the original levels. Any ideas what it going on? --- Addendum --- dmesg produces a ~2000 line output. I searched for 'error' and 'warning' in the output, and here are the relevant lines (along with some headers): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=157dcfda-acd6-4d1b-a6a8-ff9ccff61906 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210518] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error) [58673.134623] chrome[20101]: segfault at 7f38bc4ad000 ip 00007f38be769ecc sp 00007fff24616850 error 4 in libpepflashplayer.so[7f38bdc08000+e55000] [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error)

    Read the article

  • What can I do to utilize all my hard disk space?

    - by Twatcher
    I had windows XP running on my computer. Then I installed Ubuntu from under windows. Then I decided I wanted to have only Ubuntu also because I got a system message that I am out of disk space. I loaded up my system from a live Ubuntu DVD and deleted the partition with windows on it and also the other partition that had my data on it. I expanded the partition which I thought to be the system partition (since there was no other partition left It had ext format. After that Ubuntu was working fine and I thought I have enough disk space, since my harddrive is an 80 GB ATA Maxtor. I left a small partition as backup. But after downloading a small amount of files I got the message again, that I am running out of disk space. I don't now. How can UI make my disk space bigger? I am not used to Ubuntu's file system, and I don't have the overview on how I can actually see how much space there is left for me to use. I have basically now 1 partition with the system on it and one small backup (as far as I understand). My system is (from system utility) Ubuntu 12.04 LS 3,9 GB Intel Core 2 2,4 Ghz 80 GB ATA Maxtor Here are the results for sudo fdisk -l Disk /dev/sda: 80.0 GB, 79998918144 bytes<br> 255 heads, 63 sectors/track, 9725 cylinders, total 156247887 sectors<br> Units = sectors of 1 * 512 = 512 bytes<br> Sector size (logical/physical): 512 bytes / 512 bytes<br> I/O size (minimum/optimal): 512 bytes / 512 bytes<br> Disk identifier: 0x41ab2316<br> Device Boot Start End Blocks Id System<br> /dev/sda1 * 63 123750399 61875168+ 7 HPFS/NTFS/exFAT<br> /dev/sda2 123750400 156246015 16247808 7 HPFS/NTFS/exFAT<br>

    Read the article

  • groovy multithreading

    - by srinath
    Hi, I'm newbie to groovy/grails. How to implement thread for this code . Had 2500 urls and this was taking hours of time for checking each url. so i decided to implement multi-thread for this : Here is my sample code : def urls = [ "http://www.wordpress.com", "http://67.192.103.225/QRA.Public/" , "http://www.subaru.com", "http://baldwinfilter.com/products/start.html" ] def up = urls.collect { ur - try { def url = new URL(ur) def connection = url.openConnection() if (connection.responseCode == 200) { return true } else { return false } } catch (Exception e) { return false } } For this code i need to implement multi-threading . Could any one please suggest me the code. thanks in advance, sri.

    Read the article

  • Oracle JDBC connection exception in Solaris but not Windows?

    - by lupefiasco
    I have some Java code that connects to an Oracle database using DriverManager.getConnection(). It works just fine on my Windows XP machine. However, when running the same code on a Solaris machine, I get the following exception. Both machines can reach the database machine on the network. I have included the Oracle trace logs. Mar 23, 2010 12:12:33 PM org.apache.commons.configuration.ConfigurationUtils locate FINE: ConfigurationUtils.locate(): base is /users/theUser/ADCompare, name is props.txt Mar 23, 2010 12:12:33 PM org.apache.commons.configuration.ConfigurationUtils locate FINE: Loading configuration from the path /users/theUser/ADCompare/props.txt Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINE: OracleDriver.connect(url=jdbc:oracle:thin:@//theServer:1521/theService, info) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINER: OracleDriver.connect() walletLocation:(null) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: OracleDriver.parseUrl(url=jdbc:oracle:thin:@//theServer:1521/theService) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: sub_sub_index=12, end=46, next_colon_index=16, user=17, slash=18, at_sign=17 Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: OracleDriver.parseUrl(url):return Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINER: user=theUser, password=******, database=//theServer:1521/theService, protocol=thin, prefetch=null, batch=null, accumulate batch result =true, remarks=null, synonyms=null Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection <init> FINE: PhysicalConnection.PhysicalConnection(ur="jdbc:oracle:thin:@//theServer:1521/theService", us="theUser", p="******", db="//theServer:1521/theService", info) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection <init> FINEST: PhysicalConnection.PhysicalConnection() : connectionProperties={user=theUser, password=******, protocol=thin} Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection initialize FINE: PhysicalConnection.initialize(ur="jdbc:oracle:thin:@//theServer:1521/theService", us="theUser", access) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection initialize FINE: PhysicalConnection.initialize(ur, us):return Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection needLine FINE: PhysicalConnection.needLine()--no return java.lang.ArrayIndexOutOfBoundsException: 31 at oracle.net.nl.NVTokens.parseTokens(Unknown Source) at oracle.net.nl.NVFactory.createNVPair(Unknown Source) at oracle.net.nl.NLParamParser.addNLPListElement(Unknown Source) at oracle.net.nl.NLParamParser.initializeNlpa(Unknown Source) at oracle.net.nl.NLParamParser.<init>(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.loadFile(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.checkAndReload(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.resolve(Unknown Source) at oracle.net.resolver.NameResolver.resolveName(Unknown Source) at oracle.net.resolver.AddrResolution.resolveAndExecute(Unknown Source) at oracle.net.ns.NSProtocol.establishConnection(Unknown Source) at oracle.net.ns.NSProtocol.connect(Unknown Source) at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1037) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:282) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:468) at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:839) at java.sql.DriverManager.getConnection(DriverManager.java:582) at java.sql.DriverManager.getConnection(DriverManager.java:185) The above exception is also thrown if I use OracleDataSource instead of the generic DriverManager.getConnection(). Any ideas on why the behavior is different in the different environments?

    Read the article

  • Publishing SWF using Adobe Flash

    - by Kim
    Hello everyone, I have a SWF file which contains of an image (1keyframe) and also, it contains an AS3 file with the following codes: var loader:Loader=new Loader(); var ur:URLRequest=new URLRequest("1.swf"); loader.load(ur); addChild(loader); so basically, i am trying to play the swf file (1.swf - an audio) while the image is being displayed. What I want to know is how will I be able to publish this project into an SWF file which can still play as expected even without the raw 1.swf file. I can publish SWF right now but when I delete the 1.swf file, my generated swf can only display the image. Help me please. Thanks in advance :)

    Read the article

  • groovy thread for urls

    - by Srinath
    I wrote logic for testing urls using threads. This works good for less number of urls and failing with more than 400 urls to check . class URL extends Thread{ def valid def url URL( url ) { this.url = url } void run() { try { def connection = url.toURL().openConnection() connection.setConnectTimeout(10000) if(connection.responseCode == 200 ){ valid = Boolean.TRUE }else{ valid = Boolean.FALSE } } catch ( Exception e ) { valid = Boolean.FALSE } } } def threads = []; urls.each { ur - def reader = new URL(ur) reader.start() threads.add(reader); } while (threads.size() 0) { for(int i =0; i < threads.size();i++) { def tr = threads.get(i); if (!tr.isAlive()) { if(tr.valid == true){ threads.remove(i); i--; }else{ threads.remove(i); i--; } } } Could any one please tell me how to optimize the logic and where i was going wrong . thanks in advance.

    Read the article

  • Regular expressions in python unicode

    - by Remy
    I need to remove all the html tags from a given webpage data. I tried this using regular expressions: import urllib2 import re page = urllib2.urlopen("http://www.frugalrules.com") from bs4 import BeautifulSoup, NavigableString, Comment soup = BeautifulSoup(page) link = soup.find('link', type='application/rss+xml') print link['href'] rss = urllib2.urlopen(link['href']).read() souprss = BeautifulSoup(rss) description_tag = souprss.find_all('description') content_tag = souprss.find_all('content:encoded') print re.sub('<[^>]*>', '', content_tag) But the syntax of the re.sub is: re.sub(pattern, repl, string, count=0) So, I modified the code as (instead of the print statement above): for row in content_tag: print re.sub(ur"<[^>]*>",'',row,re.UNICODE But it gives the following error: Traceback (most recent call last): File "C:\beautifulsoup4-4.3.2\collocation.py", line 20, in <module> print re.sub(ur"<[^>]*>",'',row,re.UNICODE) File "C:\Python27\lib\re.py", line 151, in sub return _compile(pattern, flags).sub(repl, string, count) TypeError: expected string or buffer What am I doing wrong?

    Read the article

  • Cant make a Usb booteable ubuntu 13.10

    - by Eli Chévere
    Hey that my second question.. Sorry for my english! I tried to make a usb booteable with ubuntu 13.10. Thats the problem everytime that i tried to boot it came an error... syslinux no default or ui configuration directive found. Before post an answer i already tried renamed isolinux etc (folder and cfg n bin) with syslinux and tried too using yumi, universal boot and live linux... Thanks for ur help!

    Read the article

  • why i got this error in my ubuntu?

    - by siabuabu
    good afternoon everyone, i'm prabu from indonesia.. and i just installed ubuntu 12.04 LTS on my laptop dual boot with windows7.. and i got an error like this - http://i1193.photobucket.com/albums/aa344/hiatus1/Crashreport_002.png http://i1193.photobucket.com/albums/aa344/hiatus1/backend_helperpy_003.png if u all know what's wrong with my ubuntu, please reply this. i'm very appreciate all ur reply guys. thanks.

    Read the article

  • Failing Sata HDD

    - by DaveCol
    I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • AHCI Driver for own OS

    - by user1496761
    I have been programming a little AHCI driver for two weeks. I have read this article and Intel's Serial ATA Advanced Host Controller Interface (AHCI) 1.3. There is an example, which shows how to read sectors via DMA mode (osdev.org). I have done this operation (ATA_CMD_READ_DMA 0xC8) successfully, but when i tried to write sectors (ATA_CMD_WRITE_DMA 0xCA) to the device, the HBA set the error Offset 30h: PxSERR – Port x Serial ATA Error - Handshake Error (this is decoding from Intel AHCI specification). I don't understand why it happened. Please, help me. In addition, I have tried to issue the command IDENTIFY 0xEC, but not successfully...

    Read the article

  • How do I determine if my controller is in IDE or AHCI mode in Linux?

    - by philcolbourn
    I have an old MacBook Pro 4,1 (early 2008) - but I suspect an answer would apply to many MacBook Pros. It has an Intel IDE/SATA controller (ICH8M/ICH8M-E). I have installed a patched MBR that is supposed to put my controller into AHCI mode. It does this by setting some controller port value that I don't understand. This seems to work as I get this from lspci: 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) Now most, perhaps all, sites that provide a solution (enabling AHCI) suggest that after a sleep/wake cycle that a controller will revert to IDE mode due to how Apple support Windows. They recommend disabling sleep. From author of patchedcode.bin I think Enabling AHCI for Windows on MacBooks NB: I do not have bootcamp installed and I do not have Windows installed. Is there a way to prove that my controller is in IDE or AHCI mode? Background Data Using patchedcode.bin MBR I get this in syslog: Jun 12 22:33:22 max kernel: [ 1.860955] ahci 0000:00:1f.2: version 3.0 Jun 12 22:33:22 max kernel: [ 1.861052] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X Jun 12 22:33:22 max kernel: [ 1.861117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode Jun 12 22:33:22 max kernel: [ 1.861120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Jun 12 22:33:22 max kernel: [ 1.861130] ahci 0000:00:1f.2: setting latency timer to 64 Jun 12 22:33:22 max kernel: [ 1.880880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jun 12 22:33:22 max kernel: [ 1.880983] scsi2 : ahci Jun 12 22:33:22 max kernel: [ 1.884552] scsi3 : ahci Jun 12 22:33:22 max kernel: [ 1.886932] scsi4 : ahci Jun 12 22:33:22 max kernel: [ 1.886998] ata3: SATA max UDMA/133 abar m2048@0xdb504000 port 0xdb504100 irq 45 Jun 12 22:33:22 max kernel: [ 1.887000] ata4: DUMMY Jun 12 22:33:22 max kernel: [ 1.887002] ata5: DUMMY Jun 12 22:33:22 max kernel: [ 2.204103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 12 22:33:22 max kernel: [ 2.204656] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 12 22:33:22 max kernel: [ 2.204662] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jun 12 22:33:22 max kernel: [ 2.205324] ata3.00: configured for UDMA/100 Jun 12 22:33:22 max kernel: [ 2.205554] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5 Using my original MBR I get this from syslog: Jun 13 18:07:13 max kernel: [ 0.622861] ata_piix 0000:00:1f.1: version 2.13 Jun 13 18:07:13 max kernel: [ 0.622869] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 Jun 13 18:07:13 max kernel: [ 0.622924] ata_piix 0000:00:1f.1: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.623339] scsi0 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623730] scsi1 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623765] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 Jun 13 18:07:13 max kernel: [ 0.623767] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 Jun 13 18:07:13 max kernel: [ 0.623810] ata_piix 0000:00:1f.2: MAP [ Jun 13 18:07:13 max kernel: [ 0.623811] P0 -- -- -- ] Jun 13 18:07:13 max kernel: [ 0.623866] ata_piix 0000:00:1f.2: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.624241] scsi2 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624558] scsi3 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624862] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 Jun 13 18:07:13 max kernel: [ 0.624865] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 Jun 13 18:07:13 max kernel: [ 1.208879] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 13 18:07:13 max kernel: [ 1.208882] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 13 18:07:13 max kernel: [ 1.208961] ata1.01: ATAPI: MATSHITA DVD+/-RW UJ-867S, 1.00, max UDMA/33 Jun 13 18:07:13 max kernel: [ 1.216186] ata3.00: configured for UDMA/100 Jun 13 18:07:13 max kernel: [ 1.224396] ata1.01: configured for UDMA/33

    Read the article

  • Disk operations freeze Debian

    - by Grzenio
    Hi, I have just installed Debian testing on my new desktop and I am not very happy with performance - when I perform a disk intensive operation, e.g. upgrade packages in the system, everything seems to freeze, e.g. changing tabs in Iceweasel takes 3 seconds. I run the Debian on my 3 year old Thinkpad X60 ultra-portable, and I don't have these issues. (every single parameter of the laptop is much worse than the desktop). I am using the default packaged kernel and scripts. I run hdparm -t /dev/sda1 And I got around 96GB/s, which is expected. What else can I try to make it work better? EDIT: grzes:/home/ga# hdparm -i /dev/sda /dev/sda: Model=WDC WD15EARS-00Z5B1, FwRev=80.00A80, SerialNo=WD-WMAVU1362357 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=2930277168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7 * signifies the current active mode EDIT2: Even my wife said "on this new computer I can't do anything when I copy the photos from the camera and its much worse than on the old one". So it must be serious. EDIT3: Updated to 2.6.32, but still no improvement EDIT4: I forgot to mention that the new disk is ext4, the old was ext3. EDIT5: Still not solved. I have a P43 ASUS P5QL-E board. Lines from dmesg that seem relevant: [ 0.370850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.370852] io scheduler noop registered [ 0.370853] io scheduler anticipatory registered [ 0.370854] io scheduler deadline registered [ 0.370876] io scheduler cfq registered (default) ... [ 0.908233] ata_piix 0000:00:1f.2: version 2.13 [ 0.908243] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.908246] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.908275] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.908316] scsi0 : ata_piix [ 0.908374] scsi1 : ata_piix [ 0.909180] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 [ 0.909183] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 [ 0.909199] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.909202] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.909228] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.909279] scsi2 : ata_piix [ 0.909326] scsi3 : ata_piix [ 0.910021] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 [ 0.910024] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 [ 0.915575] FDC 0 is a post-1991 82077 ... [ 1.716062] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.716074] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.724318] ata1.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133 [ 1.724322] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.740339] ata1.00: configured for UDMA/133 [ 1.740428] scsi 0:0:0:0: Direct-Access ATA WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5 [ 1.746788] scsi 6:0:0:0: CD-ROM ASUS DRW-1608P 1.17 PQ: 0 ANSI: 5 ... [ 1.925981] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.926005] sd 0:0:0:0: [sda] Write Protect is off [ 1.926007] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.926020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.926092] sda:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.931106] Uniform CD-ROM driver Revision: 3.20 [ 1.931191] sr 6:0:0:0: Attached scsi CD-ROM sr0 ... [ 1.941936] sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.967691] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.970938] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.970959] sr 6:0:0:0: Attached scsi generic sg1 type 5 ... [ 2.500086] EXT4-fs (sda3): mounted filesystem with ordered data mode ... [ 7.150468] EXT4-fs (sda6): mounted filesystem with ordered data mode

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >