Search Results

Search found 96383 results on 3856 pages for 'code pro'.

Page 2/3856 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Advantages of SQL Backup Pro

    - by Grant Fritchey
    Getting backups of your databases in place is a fundamental issue for protection of the business. Yes, I said business, not data, not databases, but business. Because of a lack of good, tested, backups, companies have gone completely out of business or suffered traumatic financial loss. That’s just a simple fact (outlined with a few examples here). So you want to get backups right. That’s a big part of why we make Red Gate SQL Backup Pro work the way it does. Yes, you could just use native backups, but you’ll be missing a few advantages that we provide over and above what you get out of the box from Microsoft. Let’s talk about them. Guidance If you’re a hard-core DBA with 20+ years of experience on every version of SQL Server and several other data platforms besides, you may already know what you need in order to get a set of tested backups in place. But, if you’re not, maybe a little help would be a good thing. To set up backups for your servers, we supply a wizard that will step you through the entire process. It will also act to guide you down good paths. For example, if your databases are in Full Recovery, you should set up transaction log backups to run on a regular basis. When you choose a transaction log backup from the Backup Type you’ll see that only those databases that are in Full Recovery will be listed: This makes it very easy to be sure you have a log backup set up for all the databases you should and none of the databases where you won’t be able to. There are other examples of guidance throughout the product. If you have the responsibility of managing backups but very little knowledge or time, we can help you out. Throughout the software you’ll notice little green question marks. You can see two in the screen above and more in each of the screens in other topics below this one. Clicking on these will open a window with additional information about the topic in question which should help to guide you through some of the tougher decisions you may have to make while setting up your backup jobs. Here’s an example: Backup Copies As a part of the wizard you can choose to make a copy of your backup on your network. This process runs as part of the Red Gate SQL Backup engine. It will copy your backup, after completing the backup so it doesn’t cause any additional blocking or resource use within the backup process, to the network location you define. Creating a copy acts as a mechanism of protection for your backups. You can then backup that copy or do other things with it, all without affecting the original backup file. This requires either an additional backup or additional scripting to get it done within the native Microsoft backup engine. Offsite Storage Red Gate offers you the ability to immediately copy your backup to the cloud as a further, off-site, protection of your backups. It’s a service we provide and expose through the Backup wizard. Your backup will complete first, just like with the network backup copy, then an asynchronous process will copy that backup to cloud storage. Again, this is built right into the wizard or even the command line calls to SQL Backup, so it’s part a single process within your system. With native backup you would need to write additional scripts, possibly outside of T-SQL, to make this happen. Before you can use this with your backups you’ll need to do a little setup, but it’s built right into the product to get this done. You’ll be directed to the web site for our hosted storage where you can set up an account. Compression If you have SQL Server 2008 Enterprise, or you’re on SQL Server 2008R2 or greater and you have a Standard or Enterprise license, then you have backup compression. It’s built right in and works well. But, if you need even more compression then you might want to consider Red Gate SQL Backup Pro. We offer four levels of compression within the product. This means you can get a little compression faster, or you can just sacrifice some CPU time and get even more compression. You decide. For just a simple example I backed up AdventureWorks2012 using both methods of compression. The resulting file from native was 53mb. Our file was 33mb. That’s a file that is smaller by 38%, not a small number when we start talking gigabytes. We even provide guidance here to help you determine which level of compression would be right for you and your system: So for this test, if you wanted maximum compression with minimum CPU use you’d probably want to go with Level 2 which gets you almost as much compression as Level 3 but will use fewer resources. And that compression is still better than the native one by 10%. Restore Testing Backups are vital. But, a backup is just a file until you restore it. How do you know that you can restore that backup? Of course, you’ll use CHECKSUM to validate that what was read from disk during the backup process is what gets written to the backup file. You’ll also use VERIFYONLY to check that the backup header and the checksums on the backup file are valid. But, this doesn’t do a complete test of the backup. The only complete test is a restore. So, what you really need is a process that tests your backups. This is something you’ll have to schedule separately from your backups, but we provide a couple of mechanisms to help you out here. First, when you create a backup schedule, all done through our wizard which gives you as much guidance as you get when running backups, you get the option of creating a reminder to create a job to test your restores. You can enable this or disable it as you choose when creating your scheduled backups. Once you’re ready to schedule test restores for your databases, we have a wizard for this as well. After you choose the databases and restores you want to test, all configurable for automation, you get to decide if you’re going to restore to a specified copy or to the original database: If you’re doing your tests on a new server (probably the best choice) you can just overwrite the original database if it’s there. If not, you may want to create a new database each time you test your restores. Another part of validating your backups is ensuring that they can pass consistency checks. So we have DBCC built right into the process. You can even decide how you want DBCC run, which error messages to include, limit or add to the checks being run. With this you could offload some DBCC checks from your production system so that you only run the physical checks on your production box, but run the full check on this backup. That makes backup testing not just a general safety process, but a performance enhancer as well: Finally, assuming the tests pass, you can delete the database, leave it in place, or delete it regardless of the tests passing. All this is automated and scheduled through the SQL Agent job on your servers. Running your databases through this process will ensure that you don’t just have backups, but that you have tested backups. Single Point of Management If you have more than one server to maintain, getting backups setup could be a tedious process. But, with Red Gate SQL Backup Pro you can connect to multiple servers and then manage all your databases and all your servers backups from a single location. You’ll be able to see what is scheduled, what has run successfully and what has failed, all from a single interface without having to connect to different servers. Log Shipping Wizard If you want to set up log shipping as part of a disaster recovery process, it can frequently be a pain to get configured correctly. We supply a wizard that will walk you through every step of the process including setting up alerts so you’ll know should your log shipping fail. Summary You want to get your backups right. As outlined above, Red Gate SQL Backup Pro will absolutely help you there. We supply a number of processes and functionalities above and beyond what you get with SQL Server native. Plus, with our guidance, hints and reminders, you will get your backups set up in a way that protects your business.

    Read the article

  • Review quality of code

    - by magol
    I have been asked to quality review two code bases. I've never done anything like that, and need advice on how to perform it and report it. Background There are two providers of code, one in VB and one in C (ISO 9899:1999 (C99)). These two programs do not work so well together, and of course, the two suppliers blames each other. I will therefore as a independent person review both codes, on a comprehensive level review the quality of the codes to find out where it is most likely that the problem lies. I will not try to find problems, but simply review the quality and how simple it is to manage and understand the code. Edit: I have yet not received much information about what the problem consists of. I've just been told that I will examine the code in terms of quality. Not so much more. I do not know the background to why they took this decision.

    Read the article

  • Is Code Complete still Code Complete? [closed]

    - by Peter Turner
    It's been quite a few years since Code Complete was published. I really love the book, I keep it in the bathroom at the office and read a little out of it once or twice a day. But I don't think it's possible to call Code Complete, "Code Complete" when it doesn't have language features that even Delphi has, like anonymous methods and generics. What key sections are missing from this book, and what should be deprecated?

    Read the article

  • How to Code Faster (Without Sacrificing Quality)

    - by ashes999
    I've been a professional coder for a several years. The comments about my code have generally been the same: writes great code, well-tested, but could be faster. So how do I become a faster coder, without sacrificing quality? For the sake of this question, I'm going to limit the scope to C#, since that's primarily what I code (for fun) -- or Java, which is similar enough in many ways that matter. Things that I'm already doing: Write the minimal solution that will get the job done Write a slew of automated tests (prevents regressions) Write (and use) reusable libraries for all kinds of things Use well-known technologies where they work well (eg. Hibernate) Use design patterns where they fit into place (eg. Singleton) These are all great, but I don't feel like my speed is increasing over time. I do care, because if I can do something to increase my productivity (even by 10%), that's 10% faster than my competitors. (Not that I have any.) Besides which, I've consistently gotten this feeback from my managers -- whether it was small-scale Flash development or enterprise Java/C++ development. Edit: There seem to be a lot of questions about what I mean by fast, and how I know I'm slow. Let me clarify with some more details. I worked in small and medium-sized teams (5-50 people) in various companies over various projects and various technologies (Flash, ASP.NET, Java, C++). The observation of my managers (which they told me directly) is that I'm "slow." Part of this is because a significant number of my peers sacrificed quality for speed; they wrote code that was buggy, hard to read, hard to maintain, and difficult to write automated tests for. My code generally is well-documented, readable, and testable. At Oracle, I would consistently solve bugs slower than other team-members. I know this, because I would get comments to that effect; this means that other (yes, more senior and experienced) developers could do my work in less time than it took me, at nearly the same quality (readability, maintainability, and testability). Why? What am I missing? How can I get better at this? My end goal is simple: if I can make product X in 40 hours today, and I can improve myself somehow so that I can create the same product at 20, 30, or even 38 hours tomorrow, that's what I want to know -- how do I get there? What process can I use to continually improve? I had thought it was about reusing code, but that's not enough, it seems.

    Read the article

  • Picking a code review tool

    - by marcog
    We are a startup looking to migrate from Fogbugz/Kiln to a new issue tracker/code review system. We are very happy with Jira, especially the configurability, but we are undecided on a code review tool. We have been trialing Bitbucket, but it doesn't fit our workflow well. Here are the problems we have identified with BB: Comments can be hard to find: when commenting on code not visible in the diff when code that is commented on is later changed viewing the full file doesn't include comments (also doesn't show changes) Viewing comments on individual commits can be a pain We have the implementer merge the diff and close the issue, whereas pull requests are more suited to the open source model where someone with commit rights merges We would like to automate creation of the code review (either from Jira or a command line tool) No syntax highlighting Once the pull request exceeds a certain size, BB won't show the whole thing and you have to view individual commits Linking BB pull requests to Jira issues is a bit janky: we have a pull request URL field on Jira, but this doesn't work when there are changes in multiple repositories Does anyone have any good suggestion given the above? We are tight on budget, and Jira integration is a big plus. We also have multiple commits per issue, and would like to have the option of viewing individual commits in the review. It might also be worth noting that we have a separate reviewer and tester for each issue.

    Read the article

  • How to set automatic brightness in macbook pro?

    - by Mauricio Andrés
    I have just installes ubuntu 14.04 in my macbook pro, and I already configure all but the keyboard and screen brightness. In OS X, the brightness is controled automatically, I want to know if this is possible to do the same on ubuntu, if can't, then how can I set that do not start with all the brightness, this has been a great bug in ubuntu since the start, a lot of time has passed and this keeps been a real trouble. Thanks for your help.

    Read the article

  • The SSL Bindings Issue–Web Pro Week 6 of 52

    - by OWScott
    We have a chicken before the egg issue with HTTPS bindings.  This video—week 6 of a 52 week series for the web administrator—covers why HTTPS bindings don’t support host headers the same as HTTP bindings do.  In this video I show the issue and use Wireshark to see it in action. If you haven’t seen the other weeks, you can find past and future videos on the Web Pro Series landing page. The SSL Bindings Issue

    Read the article

  • MacBook Pro 8.2 wifi keeps disconnecting, Ubuntu 12.04

    - by Sean Isley
    I am using a MacBook Pro 8.2 with Ubuntu 12.04, and my wifi disconnects consistently. I followed the directions as detailed here here, however, and it works up to expected speeds, but after within an hours time, the wifi disconnects and the only way to solve the issue is to either reboot OR disable wireless and re-enable it. lsmod | grep cfg80211 outputs: cfg80211 178818 2 b43,mac80211 I suspect that I did not blacklist the correct driver and there are two drivers causing instability, however I have no idea if I actually did it correctly.

    Read the article

  • Installing drivers for Ubuntu 12.04 on MacBook Pro 9,1 Mid 2012 15 inch

    - by Pratyush Nalam
    I just installed Ubuntu 12.04 on my MacBook Pro 9,1 Mid 2012 non retina 15 inch. I installed the 4 drivers from this link https://launchpad.net/~mactel-support/+archive/ppa?field.series_filter=precise but still I can't get wireless or bluetooth to work. Even adaptive brightness I think isn't working. Can anyone suggest where to get the complete set of drivers? P.s. Additional drivers says no proprietary devices found which is weird.

    Read the article

  • Code Golf: Code 39 Bar Code

    - by gwell
    The challenge The shortest code by character count to draw an ASCII representation of a Code 39 bar code. Wikipedia article about Code 39: http://en.wikipedia.org/wiki/Code_39 Input The input will be a string of legal characters for Code 39 bar codes. This means 43 characters are valid: 0-9 A-Z (space) and -.$/+%. The * character will not appear in the input as it is used as the start and stop characters. Output Each character encoded in Code 39 bar codes have nine elements, five bars and four spaces. Bars will be represented with # characters, and spaces will be represented with the space character. Three of the nine elements will be wide. The narrow elements will be one character wide, and the wide elements will be three characters wide. A inter-character space of a single space should be added between each character pattern. The pattern should be repeated so that the height of the bar code is eight characters high. The start/stop character * (bWbwBwBwb) would be represented like this: # # ### ### # # # ### ### # # # ### ### # # # ### ### # # # ### ### # # # ### ### # # # ### ### # # # ### ### # ^ ^ ^^ ^ ^ ^ ^^^ | | || | | | ||| narrow bar -+ | || | | | ||| wide space ---+ || | | | ||| narrow bar -----+| | | | ||| narrow space ------+ | | | ||| wide bar --------+ | | ||| narrow space ----------+ | ||| wide bar ------------+ ||| narrow space --------------+|| narrow bar ---------------+| inter-character space ----------------+ The start and stop character * will need to be output at the start and end of the bar code. No quiet space will need to be included before or after the bar code. No check digit will need to be calculated. Full ASCII Code39 encoding is not required, just the standard 43 characters. No text needs to be printed below the ASCII bar code representation to identify the output contents. The character # can be replaced with another character of higher density if wanted. Using the full block character U+2588, would allow the bar code to actually scan when printed. Test cases Input: ABC Output: # # ### ### # ### # # # ### # ### # # ### ### ### # # # # # ### ### # # # ### ### # ### # # # ### # ### # # ### ### ### # # # # # ### ### # # # ### ### # ### # # # ### # ### # # ### ### ### # # # # # ### ### # # # ### ### # ### # # # ### # ### # # ### ### ### # # # # # ### ### # # # ### ### # ### # # # ### # ### # # ### ### ### # # # # # ### ### # # # ### ### # ### # # # ### # ### # # ### ### ### # # # # # ### ### # # # ### ### # ### # # # ### # ### # # ### ### ### # # # # # ### ### # # # ### ### # ### # # # ### # ### # # ### ### ### # # # # # ### ### # Input: 1/3 Output: # # ### ### # ### # # # ### # # # # # ### ### # # # # # ### ### # # # ### ### # ### # # # ### # # # # # ### ### # # # # # ### ### # # # ### ### # ### # # # ### # # # # # ### ### # # # # # ### ### # # # ### ### # ### # # # ### # # # # # ### ### # # # # # ### ### # # # ### ### # ### # # # ### # # # # # ### ### # # # # # ### ### # # # ### ### # ### # # # ### # # # # # ### ### # # # # # ### ### # # # ### ### # ### # # # ### # # # # # ### ### # # # # # ### ### # # # ### ### # ### # # # ### # # # # # ### ### # # # # # ### ### # Input: - $ (minus space dollar) Output: # # ### ### # # # # ### ### # ### # ### # # # # # # # # ### ### # # # ### ### # # # # ### ### # ### # ### # # # # # # # # ### ### # # # ### ### # # # # ### ### # ### # ### # # # # # # # # ### ### # # # ### ### # # # # ### ### # ### # ### # # # # # # # # ### ### # # # ### ### # # # # ### ### # ### # ### # # # # # # # # ### ### # # # ### ### # # # # ### ### # ### # ### # # # # # # # # ### ### # # # ### ### # # # # ### ### # ### # ### # # # # # # # # ### ### # # # ### ### # # # # ### ### # ### # ### # # # # # # # # ### ### # Code count includes input/output (full program).

    Read the article

  • Good fix vs Quick fix [duplicate]

    - by Andrea Girardi
    This question already has an answer here: Does craftsmanship pay off? [duplicate] 16 answers Good design: How much hackyness is acceptable? [duplicate] 9 answers How do you balance between “do it right” and “do it ASAP” in your daily work? 14 answers Let's start from this principle: quality is a feature that you can't add to a project in the middle of the development process. This is the scenario: two weeks to go live with my project and, one of the developers added a specific method used only for one web application to our framework (Our framework is a bounce of java classes used to extract content from MongoDB, Alfresco, mySql and it's used by web applications). I'm the team leader and I told him to generalize the method to keep the framework to keep reusable but he said "no, I prefer don't do that because there are a lot of bugs that need to be fixed". The manager is agree with him and of course I'm not. Is it better to made extra effort to keep a framework free from any specific implementation (probably used only by one web application) or just add the methods because it works? So, my question is: is it correct to write code that only works or is better to write code that works but it doesn't sucks (i.e. adding embedded value, specific methods, extra classes, add column to database, etc)? How is it possible to justify the extra time (to be honest, this kind of fix requires 10 minutes extra to write a good generic code) to the management? How is possible to argue it's the right way to write code to young developers and PM? in general, good fix or quick fix? Ah, 10 minutes after I get the email from PM, he asked me why on a url of application 2 there was the name of application 1 during the login? I like to quote Jeff Atwood: "Don't leave "broken windows" (bad designs, wrong decisions, or poor code) unrepaired. Fix each one as soon as it is discovered. " Excerpt From: Hyperink. "How-To-Stop-Sucking-And-Be-Awesome-Instead." iBooks.

    Read the article

  • How to evaluate the quality of Rails code?

    - by Fortuity
    In a code review, what do you look for to assess a developer's expertise? Given an opportunity to look at a developer's work on a real-world project, what tell-tale signs are a tip-off to carelessness or lack of experience? Conversely, where do you look in the code to find evidence of a developer's skill or knowledge of best practices? For example, if I'm looking at a typical Rails app, I would be happy to see the developer is using RSpec (showing a commitment to using test-driven development and knowledge that RSpec is currently more popular than the default TestUnit). But in examining the specs for a Rails model, I see that the developer is testing associations, which might indicate a lack of real understanding of Rails testing requirements (since such tests are redundant given that they only test what's already implemented and tested in ActiveRecord). More generally, I might look to see if developers are writing their own implementations versus using widely available gems or if they are cleaning up code versus leaving lots of commented-out "leftovers." What helps you determine the skill of a Rails developer? What's your code quality checklist?

    Read the article

  • NVIDIA graphics driver on Macbook Pro 10,1

    - by Boatzart
    I just installed 14.04 over my old 12.04 partition on my Macbook Pro 10,1 (which is dual-booting with OS X) by following the instructions here. The only difference is that I'm using rEFInd instead of rEFIt. The proprietary NVIDIA drivers worked great with 12.04, but now I'm unable to boot into Unity with it in 14.04. Generally, I just get a black screen after the Grub menu, though occasionally I get some kind of panic screen like this, where I see errors like: [drm: __gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear. [drm: __gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out [drm: __intel_ring_setup_status_page] *ERROR* render ring: wait for SyncFlush to complete for TLB invalidation timed out etc. Using the nouveau drivers works fine, but everything feels sluggish so I would really like to get the NVIDIA drivers working. Has anyone successfully gotten the NVIDIA drivers working with the GT-650M Mac Edition?

    Read the article

  • Macbook pro 8,1 ubuntu 12.04 sd card reader doesnt work

    - by mandy
    THe built in sd card reader on the macbook pro 8,1 (2011, early or mid i think) doesnt work AT ALL. However i read here.... https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801034 that someone plugged in ethernet and it works. How the hell does that make a difference? There has to be some kind of better workaround? I take my laptop on the go, thats why i bought a LAPTOP. I dont want to be tethered down. Please help?

    Read the article

  • Wine , macbook pro 5.5, nvidia 9400 and Diablo 3

    - by Jeff Labonte
    I'm using a Macbook pro 5.5 to play Diablo 3 on Ubuntu 12.04LTS 64bit! On Mac OS X it works like a charm but on Ubuntu I'm having some trouble! I have made my research to see what's going wrong! On wine or a VM my graphic has 128mb and on Linux it has 512mb and on Mac OS X 256mb.... well I guess that the graphic card is sharing his memory with the ram! but I've got lags when I play the game! what can I do to have better performances!

    Read the article

  • What tools do you use to let you know that methods in your codebase are getting too long?

    - by blueberryfields
    Most people seem to agree that long methods are a code smell - a sign something may not be quite right with the code contained in them. Which tools do you use to detect this smell? clarified title based on responses. also, remember: Your code will live over time, and be edited by multiple programmers Emergency fixes and changes will come in, late at night, when the writer is too tired to pay attention to smells Different programmers use different tools. A contractor with 4 screens set at maximum resolution will have a different idea of acceptable method size In this context, I'm looking for tools and methods which go beyond looking at the size of a method when it's written, or when it's being edited.

    Read the article

  • Code Review tools - to use or not?

    - by liortal
    On my dev team, we're doing code reviews, however not in a proper way i believe. The issues our process suffers from: Not enough time is allocated for proper code review. Doing reviews is not mandatory - many times it is simply not done. Devs sit together for reviews, due to lack of another easy mechanism for doing it "offline" without spending both developers' time. My question is: can integration of a tool for code reviews improve the points mentioned above? Is it not needed? I would love to hear from positive/negative experiences.

    Read the article

  • Installing ubuntu on MacBook Pro 9,1

    - by pratnala
    I bought a MacBook Pro 9,1 (Mid 2012, 15inch, NOT retina). Can anyone tell me how to install Ubuntu 12.04 on it? I already have Windows installed via BootCamp. Also, where to install drivers for Ubuntu and all? This link https://help.ubuntu.com/community/MacBookPro has nothing for 9,1 so please help me. If I have to remove BootCamp and reinstall Windows manually because BootCamp doesn't allow resizing of partitions, that's fine. Please tell me how to install Precise on MBP 9,1 Thanks!

    Read the article

  • Booting Ubuntu EFI on Macbook Pro Apple Bootmanager

    - by user279771
    Following: http://www.rodsbooks.com/ubuntu-efi/ and https://help.ubuntu.com/community/UEFIBooting#Detect_.28U.29EFI_firmware_processor_architecture I have ubuntu booting on my macbook pro with both refined and the native apple loader working, however, I would like to get the "Improving the Boot Method" (i believe it is called the kernel efi stub loader) working with the Apple Boot manager (the article only explains for refined), but have found no articles explaining this. Can anyone help with this? Below is what I have: What I have is the following: /dev/sda apple partitions /boot ext3 (root) ext3 swap side notes: From what I understand, I should have had my boot partition as fat32/hfs+... I can always switch it or copy the kernel to the apple EFI partition. (I tried creating /boot as an hfs+ partition during installation but was unable. Even after installing hfsprogs, although I was able to create an hfs+ partition in gparted I couldn't use the partition as /boot in ubiquity).

    Read the article

  • Macbook Pro wifi won't work

    - by Chris Dudley
    I opened xdiganose and it told me to go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware in order to download and install the wireless driver. I followed the instructions for Ubuntu and it aborted the installation saying something about an unsupported device (I should've saved the output, I'm using a late 2011 13" Macbook Pro.) Now when I trysudo apt-get install firmware-b43-installer I get this: Reading package lists... Done Building dependency tree Reading state information... Done firmware-b43-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 338 not upgraded. What do I do?

    Read the article

  • Installing Ubuntu 14.04 on macbook pro EFI

    - by user279771
    Macbook pro: mavericks, 5.2, graphics: nvidia geforce 9600M I followed the guides from here: https://help.ubuntu.com/community/UEFIBooting#Detect_.28U.29EFI_firmware_processor_architecture and http://www.rodsbooks.com/ubuntu-efi/. What I have is the following: /dev/sda apple partitions /boot / (root) swap When installing ubuntu, I did not install the boot loader during installation but did so in a chroot environment after installing grub-efi. I installed grub to /dev/sda1 (efi) which created the grub64.efi file in efi/ubuntu. This allows the refined boot manager to bring up grub and select ubuntu however, the graphics does not work. Even after adding nomodeset and removing quiet/splash from the kernel parameters. Any ideas on what could be wrong? To be clear, if I remove quiet/splash, I can see all the text startup messages being printed out however, the display manager doesn't appear to start (the screen stays black). Oddly enough though, the ubuntu startup sound can be heard.

    Read the article

  • Boot from Ubuntu ISO on a hfsplus partition (macbook pro)

    - by user279771
    I would like to be able to boot from an ISO stored on an HFS+ partition (the main partition on my macbook pro). Here is what I've done so far: (writing in shorthand :D) grub> insmod hfs,hfsplus,loopback,part_gpt grub> loopback loop (hd0,gpt2)/location/to/img.io grub> configfile (loop)/boot/grub/loopback.cfg ... This does not work. tab-complete of the (loop) path does not work... However, this does work (tab-complete and all) if the iso comes from my ext3 partition. For particular reasons, I can't have the iso images on the ext3 partition, they need to be kept on the hfs+ partition. What should be done?

    Read the article

  • c++ ide & tools with clang integration

    - by lurscher
    recently i read this blog about google integrating clang parser into their code analysis tools This is something in which c++ is at least a decade behind other languages like java, but now that llvm-clang is almost c++ iso-ready, i think its possible for c++ code analysis tools to begin using the c++ parser effectively, since it has been designed from the ground up precisely for this so i'm wondering if there are existing open source or known commercial projects taking this path, integrating with clang to provide higher-level analysis tools?

    Read the article

  • Where should I start reading AngularJS's source code?

    - by Abaco
    After reading this article I realized that I really didn't read any "serious" source code during my 3-years as a professional developer. Recently I started a new web-project which makes heavy use of AngularJS, so I decided to start my reading - or, better, decoding [as the blogger wrote] - activity from something that is both challenging and professionally useful. Now I just need to be pointed in the right direction. Should I just start from the start of the source code or is there a better starting point?

    Read the article

  • Distinguishing repetitive code with the same implementation

    - by KyelJmD
    Given this sample code import java.util.ArrayList; import blackjack.model.items.Card; public class BlackJackPlayer extends Player { private double bet; private Hand hand01 = new Hand(); private Hand hand02 = new Hand(); public void addCardToHand01(Card c) { hand01.addCard(c); } public void addCardToHand02(Card c) { hand02.addCard(c); } public void bustHand01() { hand01.setBust(true); } public void bustHand02() { hand02.setBust(true); } public void standHand01() { hand01.setStand(true); } public void standHand02() { hand02.setStand(true); } public boolean isHand01Bust() { return hand01.isBust(); } public boolean isHand02Bust() { return hand02.isBust(); } public boolean isHand01Standing() { return hand01.isStanding(); } public boolean isHand02Standing() { return hand02.isStanding(); } public int getHand01Score(){ return hand01.getCardScore(); } public int getHand02Score(){ return hand02.getCardScore(); } } Is this considered as a repetitive code? providing that each method is operating a seperate field but doing the same implementation ? Note that hand01 and hand02 should be distinct. if this is considered as repetitive code, how would I address this? providing that each hand is a seperate entity

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >