Search Results

Search found 54 results on 3 pages for 'dc1'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

• do I need to create an AD site for VPN network

  - by ykyri

  I have Windows Domain level 2008 R2. There are four GC DC in four different physical locations. I have Kerio-based VPN network for replication and remote administration. Here is how network configured: dc1: local IP: 192.168.0.10 VPN IP: 192.168.1.10 dc2: local IP: 10.10.8.11 VPN IP: 192.168.1.11 dc3: local IP: 10.10.9.12 VPN IP: 192.168.1.12 dc4: local IP: 10.10.10.13 VPN IP: 192.168.1.13 That's simple, replication and all works fine but when running dcdiag on dc3 I have an error: A warning event occurred. EventID: 0x000016AF During the past 4.12 hours there have been 216 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. <...> The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text 'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. Here is netlogon.log lines example: 05/30 12:07:39 DOMAIN.NAME: NO_CLIENT_SITE: dc2 192.168.1.11 05/31 09:52:11 DOMAIN.NAME: NO_CLIENT_SITE: dc4 192.168.1.13 05/31 19:49:31 DOMAIN.NAME: NO_CLIENT_SITE: adm-note 192.168.1.101 07/01 05:16:26 DOMAIN.NAME: NO_CLIENT_SITE: dc1 192.168.1.10 All VPN-joined computers are generates same log line as above. Computer amd-note is for example administrator's notebook, also have VPN. Question is should I add new AD site and bind VPN subnet 192.168.1.0/24 with that site?

  Read the article

• use exec for dsadd

  - by Daryl Gill

  I'm Programming on a Windows Server 2008 and I wish to have a WebUI to interact with the domains active directory. One of my main problems is this that i'm using dsadd from a HTML form but this is no succeeding. I know my command is correct, I have tested it out on the Servers Command line My Code is As Below: if (isset($_POST['Submit'])) { $DesiredUsername = $_POST['DesiredUsername']; $DesiredPassword = $_POST['DesiredPassword']; $DU = "{$DesiredUsername}"; // Desired Username $OU = "PHPCreatedUsers"; // Domain OU $DC1 = "slayerserv"; // Domain Part one $DC2 = "local"; // Domain Part Two $PWD = "{$DesiredPassword}"; // Password $ExecScript = 'dsadd user cn=$DesiredUsername,cn=PHPCreatedUsers,dc=slayerserv,dc=local -disabled no -pwd $DesiredPassword -mustchpwd yes'; exec($ExecScript, $output); mysql_query("INSERT INTO addedusers (`ID`, `DU`, `OU`, `DC1`, `DC2, `PWD`) VALUES ('', '$DU', '$OU', '$DC1', '$DC2', '$PWD')"); echo "<br><br>"; print_r($output); # echo "User: $DesiredUsername Has been Created"; } When I print_r($output); it Returns a blank array: Array ( ) Could anyone provide me with a solution or point me in the right direction? ++++ Below is a working example of my usage of exec $Script = 'ping 127.0.0.1 -n 1'; exec($Script, $Output); print_r($Output); print_r($Output); Gives: Array ( [0] = [1] = Pinging 127.0.0.1 with 32 bytes of data: [2] = Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 [3] = [4] = Ping statistics for 127.0.0.1: [5] = Packets: Sent = 1, Received = 1, Lost = 0 (0% loss), [6] = Approximate round trip times in milli-seconds: [7] = Minimum = 0ms, Maximum = 0ms, Average = 0ms )

  Read the article

• ADSI, SQL, Exchange Server 2010

  - by WernerCD

  Maybe I'm barking up the wrong tree... We have a Domain Controller "DC1". We have Exchange Server 2010 "Postman". Say I have an Address Book: And I add a few contacts to it: How then do I get the data from that contact via ADSI? Say I want the Job Title or CustomerID field that I filled out in the Contacts list? SELECT * FROM OPENQUERY(ADSI, 'SELECT EXTENSIONATTRIBUTE15 ,DISPLAYNAME ,GIVENNAME ,NAME ,SN ,SAMACCOUNTNAME FROM ''LDAP://DC=ATLANTICGENERAL,DC=ORG'' WHERE USERACCOUNTCONTROL=512 AND SAMACCOUNTTYPE=805306368 AND OBJECTCLASS=''PERSON'' AND OBJECTCLASS=''USER'' ORDER BY SAMACCOUNTTYPE ') How can I tie the Contact Card to an Active Directory User, so that I can edit either the AD account information OR the Exchange information and have them synced up?

  Read the article

• How to setup a 1 way trust, Windows Server 2008 R2

  - by MichaelOz

  I am on my home network and connect to workplace via a VPN. I have a DC on my home network (DC1 , domain = home). How can I setup a 1 way trust, so that I am able to run executables, such as SQL Management Studio using RunAs - then type in credentials for work domain? First question is, will a 1 way trust solve this, and can I set this up without bothering a network admin at workplace (assuming I have a domain account with enough permissions on work domain) If yes - any good step by step guide to setup 1 way trust? Server is Windows Server 2008 R2. As mentioned its DC running DNS Role too. Thanks in advance

  Read the article

• Install DC again after removing on exchange server

  - by Kawharu

  I had a DC and Exchange 2010 installed on the same machine. I removed the DC role, and Exchange server went crazy. I tried to install the DC role again to fix the problem but ran into this error when running DCPROMO: Active Directory Domain Services could not create the NTDS Settings object for this Active Directory Domain Controller CN=NTDS Settings,CN=DC1,CN=Servers,CN=Manukau,CN=Sites,CN=Configuration,DC=AccessGroupnz,DC=com on the remote AD DC Server1.AccessGroupnz.com. Ensure the provided network credentials have sufficient permissions. "The DSA operation is unable to proceed because of a DNS lookup failure." Do you think I need to run this in an elevated command prompt, or change credentials somewhere to domain admin? Or is it something else?

  Read the article

• Replacing a W2K3 Domain Controller - what do I need to know?

  - by Marko Carter

  I have a network of around 70 machines, currently with two DCs both running Windows Server 2003 (DC0 & DC1). DC0 is a five year old Poweredge 1850 and has recently become increasingly flakey, and in the past fortnight has fallen over twice. I want to replace this machine, but I'm cautious as there is huge scope for this sort of thing to go wrong. The way I imagine doing this is building a new machine then doing a DCPROMO and running three domain controllers for a month or so until I'm happy that everything is working as it should be before retiring the old machine. Particular areas of concern are the replication of roles from the current controllers (GP settings for instance) and the ramifications of switching off the machine that has, up until now, been the 'primary'. If there are compelling reasons to use Server 2008 I'm willing to do so, however I don't know if this would cause problems with my exisiting 2003 machines. Any advice on best practice or previous experiences would be most welcome.

  Read the article

• ISC Bind support for GSS-TSIG DDNS Updates?

  - by netlinxman

  First, has anyone EVER configured ISC bind 9.5.0 OR greater with support for GSS-TSIG Dynamic DNS Updates AND gotten it to work? If so, what is the configuration that was used to make that happen? I feel close to having this working. I see that GSS cred passes w/o apparent error during the TKEY negotiation with an Active Directory DC and the BIND DNS server: client 192.168.0.30#52314: query gss cred: "DNS/[email protected]", GSS_C_ACCEPT, 4294967256 gss-api source name (accept) is [email protected] process_gsstkey(): dns_tsigerror_noerror client 192.168.0.30#52314: send But, when the Update is sent, it is refused: client 192.168.0.30#58330: update client 192.168.0.30#58330: updating zone 'example.com/IN': update failed: rejected by secure update (REFUSED) client 192.168.0.30#58330: send Does anyone have this working in the real world?

  Read the article

• Most awesomely bad hack

  - by Zypher

  As I sit watching one of my latest dirty dirty hacks run, I started wondering what kind of dirty hacks you have created that are so bad they are awesome. We all have a few of them in our past - and they are probably still running in production somewhere, chugging along somehow still working. Which reminds me of the hack we had to put into place when we were moving data centers. Our IVRs had to keep running, as the data center we were moving from was the primary DC, and the new Primary wasn't quite ready to take traffic. So what do we do. Well we answer the calls in DC1, then ship the sip stream over the internet to DC2 1900 miles away ... that just felt oh so wrong. So the question is, what is one (or more) of your awesomely bad hacks?

  Read the article

• Windows 2003 and 2008 AD integrated DNS zones

  - by floyd

  We have a Windows 2003 server DC1 which is our primary DC holding all FSMO roles. It also is a DNS server for our domain domain.local which is an active directory integrated zone. We also have a Windows 2008 DC name DC2 All servers have the correct DNS entries etc. However on all dns servers there are event id 4515 indicating there are duplicate zones in separate directory partitions and only one will be used until the other is removed. And I see these, there is a zone for domain.local under the default naming partition CN=System, CN=MicrosoftDNS, DC=domain.local. As well as the DomainDNSZones partition DC=DomainDNSZones, DC=DOMAIN, DC=local, CN=MicrosoftDNS It seems that the partition in the Default Naming partition is the one which is being used currently. Which one should be in use? How do I make the EventID 4515's go away? EventID 4515: http://support.microsoft.com/kb/867464 Thanks

  Read the article

• How do you configure ISC Bind to support GSS-TSIG Updates?

  - by netlinxman

  First, has anyone EVER configured ISC bind 9.5.0 OR greater with support for GSS-TSIG Dynamic DNS Updates AND gotten it to work? If so, what is the configuration that was used to make that happen? I feel close to having this working. I see that GSS cred passes w/o apparent error during the TKEY negotiation with an Active Directory DC and the BIND DNS server: client 192.168.0.30#52314: query gss cred: "DNS/[email protected]", GSS_C_ACCEPT, 4294967256 gss-api source name (accept) is [email protected] process_gsstkey(): dns_tsigerror_noerror client 192.168.0.30#52314: send But, when the Update is sent, it is refused: client 192.168.0.30#58330: update client 192.168.0.30#58330: updating zone 'example.com/IN': update failed: rejected by secure update (REFUSED) client 192.168.0.30#58330: send Does anyone have this working in the real world?

  Read the article

• Using DNS entries to determine location

  - by Raphink

  I'm trying to think of a clean way to determine the location of machines (mainly, which datacenter they belong to) based on their network settings. I would like it to be dynamic, and I'm thinking of using special DNS records that would be specific to the DNS server in each datacenter. For example, you could have: root@machine1# dig TXT mysite ... mysite 3600 IN TXT "DC1" ... root@machine2# dig TXT mysite ... mysite 3600 IN TXT "DC2" ... etc. I know that DNS has a special LOC record for location, but it takes coordinates, so it doesn't help in my case. Is there a standard way of addressing this issue, another special type of record for it, or some standard entries in TXT records?

  Read the article

• Setting Up DHCP Server as Failover

  - by Jason Buhagiar

  I have 2 Domain Controllers running at my company; DC1 has the following roles; ADDS DNS DHCP Scope - 192.168.2.100 - 192.168.2.240 DC2 has the following roles; ADDS - Replicated DNS - Secondary DNS I also have 2 PFSense Gateways both have a different ISP Connection, DHCP Relay is not enabled on any of the machines. Can anyone suggest a way for me to install DHCP Server as FAilover on DC2 please, should I use split scope etc... Help is much appreciated :) Thanks.

  Read the article

• NFS default to 777

  - by ipengineer

  I have an NFS share. This share is shared between several different applications. Our web server is running PHP and when it creates directories it is not setting the permissions correctly so it cannot write to the directory once created. How can I mount this NFS share to where PHP has full read/write access? Below is the directory that has been created along with the media server export options and the mount options on the web server. Ideally I could set the permissions on /opt/mount and whatever group/user is on that directory when I mount to that point the share assumes those permissions. dr----x--t. 2 nobody nobody 4096 Jun 5 2014 user_2 Mount output: media.dc1:/home/fs_share on /opt/mount type nfs (rw,vers=4,addr=10.10.20.127,clientaddr=10.10.20.42) Exports file from media server: /home/fs_share 10.10.20.0/255.255.255.0(rw,sync,no_root_squash)

  Read the article

• Openvpn plugin openvpn-auth-ldap does not bind to Active Directory

  - by Selivanov Pavel

  I'm trying to configure OpenVPN with openvpn-auth-ldap plugin to authorize users via Active Directory LDAP. When I use the same server config without plugin option, and add client config with generated client key and cert, connection is successful, so problem is in the plugin. server.conf: plugin /usr/lib/openvpn/openvpn-auth-ldap.so "/etc/openvpn-test/openvpn-auth-ldap.conf" port 1194 proto tcp dev tun keepalive 10 60 topology subnet server 10.0.2.0 255.255.255.0 tls-server ca ca.crt dh dh1024.pem cert server.crt key server.key #crl-verify crl.pem persist-key persist-tun user nobody group nogroup verb 3 mute 20 openvpn-auth-ldap.conf: <LDAP> URL ldap://dc1.domain:389 TLSEnable no BindDN cn=bot_auth,cn=Users,dc=domain Password bot_auth Timeout 15 FollowReferrals yes </LDAP> <Authorization> BaseDN "cn=Users,dc=domain" SearchFilter "(sAMAccountName=%u)" RequireGroup false # <Group> # BaseDN "ou=groups,dc=mycompany,dc=local" # SearchFilter "(|(cn=developers)(cn=artists))" # MemberAttribute uniqueMember # </Group> </Authorization> Top-level domain in AD is used by historical reasons. Analogue configuration is working for Apache 2.2 in mod-authzn-ldap. User and password are correct. client.conf: remote server_name port 1194 proto tcp client pull remote-cert-tls server dev tun resolv-retry infinite nobind ca ca.crt ; with keys - works fine #cert test.crt #key test.key ; without keys - by password auth-user-pass persist-tun verb 3 mute 20 In server log there is string PLUGIN_INIT: POST /usr/lib/openvpn/openvpn-auth-ldap.so '[/usr/lib/openvpn/openvpn-auth-ldap.so] [/etc/openvpn-test/openvpn-auth-ldap.conf]' which indicates, that plugin failed. I can telnet to dc1.domain:389, so this is not network/firewall problem. Later server says TLS Error: TLS object -> incoming plaintext read error TLS handshake failed - without plugin it tryes to do usal key authentification. server log: Tue Nov 22 03:06:20 2011 OpenVPN 2.1.3 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Oct 21 2010 Tue Nov 22 03:06:20 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Nov 22 03:06:20 2011 PLUGIN_INIT: POST /usr/lib/openvpn/openvpn-auth-ldap.so '[/usr/lib/openvpn/openvpn-auth-ldap.so] [/etc/openvpn-test/openvpn-auth-ldap.conf]' intercepted=PLUGIN_AUTH_USER_PASS_VERIFY|PLUGIN_CLIENT_CONNECT|PLUGIN_CLIENT_DISCONNECT Tue Nov 22 03:06:20 2011 Diffie-Hellman initialized with 1024 bit key Tue Nov 22 03:06:20 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue Nov 22 03:06:20 2011 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Nov 22 03:06:20 2011 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:20 2011 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:20 2011 TLS-Auth MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:06:20 2011 Socket Buffers: R=[87380->131072] S=[16384->131072] Tue Nov 22 03:06:20 2011 TUN/TAP device tun1 opened Tue Nov 22 03:06:20 2011 TUN/TAP TX queue length set to 100 Tue Nov 22 03:06:20 2011 /sbin/ifconfig tun1 10.0.2.1 netmask 255.255.255.0 mtu 1500 broadcast 10.0.2.255 Tue Nov 22 03:06:20 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:06:20 2011 GID set to nogroup Tue Nov 22 03:06:20 2011 UID set to nobody Tue Nov 22 03:06:20 2011 Listening for incoming TCP connection on [undef] Tue Nov 22 03:06:20 2011 TCPv4_SERVER link local (bound): [undef] Tue Nov 22 03:06:20 2011 TCPv4_SERVER link remote: [undef] Tue Nov 22 03:06:20 2011 MULTI: multi_init called, r=256 v=256 Tue Nov 22 03:06:20 2011 IFCONFIG POOL: base=10.0.2.2 size=252 Tue Nov 22 03:06:20 2011 MULTI: TCP INIT maxclients=1024 maxevents=1028 Tue Nov 22 03:06:20 2011 Initialization Sequence Completed Tue Nov 22 03:07:10 2011 MULTI: multi_create_instance called Tue Nov 22 03:07:10 2011 Re-using SSL/TLS context Tue Nov 22 03:07:10 2011 Control Channel MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:07:10 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:07:10 2011 Local Options hash (VER=V4): 'c413e92e' Tue Nov 22 03:07:10 2011 Expected Remote Options hash (VER=V4): 'd8421bb0' Tue Nov 22 03:07:10 2011 TCP connection established with [AF_INET]10.0.0.9:47808 Tue Nov 22 03:07:10 2011 TCPv4_SERVER link local: [undef] Tue Nov 22 03:07:10 2011 TCPv4_SERVER link remote: [AF_INET]10.0.0.9:47808 Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS: Initial packet from [AF_INET]10.0.0.9:47808, sid=a2cd4052 84b47108 Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS_ERROR: BIO read tls_read_plaintext error: error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS Error: TLS object -> incoming plaintext read error Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS Error: TLS handshake failed Tue Nov 22 03:07:11 2011 10.0.0.9:47808 Fatal TLS error (check_tls_errors_co), restarting Tue Nov 22 03:07:11 2011 10.0.0.9:47808 SIGUSR1[soft,tls-error] received, client-instance restarting Tue Nov 22 03:07:11 2011 TCP/UDP: Closing socket client log: Tue Nov 22 03:06:18 2011 OpenVPN 2.1.3 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Oct 22 2010 Enter Auth Username:user Enter Auth Password: Tue Nov 22 03:06:25 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Nov 22 03:06:25 2011 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Nov 22 03:06:25 2011 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:25 2011 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:25 2011 Control Channel MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:06:25 2011 Socket Buffers: R=[87380->131072] S=[16384->131072] Tue Nov 22 03:06:25 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:06:25 2011 Local Options hash (VER=V4): 'd8421bb0' Tue Nov 22 03:06:25 2011 Expected Remote Options hash (VER=V4): 'c413e92e' Tue Nov 22 03:06:25 2011 Attempting to establish TCP connection with [AF_INET]10.0.0.2:1194 [nonblock] Tue Nov 22 03:06:26 2011 TCP connection established with [AF_INET]10.0.0.2:1194 Tue Nov 22 03:06:26 2011 TCPv4_CLIENT link local: [undef] Tue Nov 22 03:06:26 2011 TCPv4_CLIENT link remote: [AF_INET]10.0.0.2:1194 Tue Nov 22 03:06:26 2011 TLS: Initial packet from [AF_INET]10.0.0.2:1194, sid=7a3c2a0f bd35bca7 Tue Nov 22 03:06:26 2011 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Tue Nov 22 03:06:26 2011 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=Fort-Funston_CA/[email protected] Tue Nov 22 03:06:26 2011 Validating certificate key usage Tue Nov 22 03:06:26 2011 ++ Certificate has key usage 00a0, expects 00a0 Tue Nov 22 03:06:26 2011 VERIFY KU OK Tue Nov 22 03:06:26 2011 Validating certificate extended key usage Tue Nov 22 03:06:26 2011 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Tue Nov 22 03:06:26 2011 VERIFY EKU OK Tue Nov 22 03:06:26 2011 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=server/[email protected] Tue Nov 22 03:06:26 2011 Connection reset, restarting [0] Tue Nov 22 03:06:26 2011 TCP/UDP: Closing socket Tue Nov 22 03:06:26 2011 SIGUSR1[soft,connection-reset] received, process restarting Tue Nov 22 03:06:26 2011 Restart pause, 5 second(s) ^CTue Nov 22 03:06:27 2011 SIGINT[hard,init_instance] received, process exiting Does anybody know how to get openvpn-auth-ldap wirking?

  Read the article

• How modify ascii table in C?

  - by drigoSkalWalker

  like this: My ASCII Chart 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 NUL SOH STX ETX EOT ENQ ACK BEL BS HT LF VT FF CR SO SI 1 DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 2 SP ! " # $ % & ' ( ) * + , - . / 3 0 1 2 3 4 5 6 7 8 9 : ; ? 4 @ A B C D E F G H I J K L M N O 5 P Q R S T U V W X Y Z [ \ ] ^ _ 6 ` a b c d e f g h i j k l m n o 7 p q r s t u v w x y z { | } ~ DEL I want to call a function, alter the ascii sequence in this function and when it return, the ascii sequence back to the original. thanks in advance!

  Read the article

• Help diagnosing Likewise Open Active Directory authentication problem

  - by purpletonic

  I have two servers which were up until recently authenticating against the companies Active Directory Domain controller. I believe a recent change to the Active Directory administrator password caused the servers to stop authenticating against AD. I tried to add the servers back to the domain using the command: domainjoin-cli join example.com adusername this seemed to work without complaints, but when I try to login via ssh with my domain account, I get an invalid password error. When I run the command: lw-enum-users it prints all of the domain users, and looking up my own account, I see that it is valid and my password hasn't expired. I also ran lw-get-status and received the following: LSA Server Status: Agent version: 5.0.0 Uptime: 0 days 3 hours 35 minutes 46 seconds [Authentication provider: lsa-activedirectory-provider] Status: Online Mode: Un-provisioned Domain: example.com Forest: example.com Site: Default-First-Site-Name Online check interval: 300 seconds \[Trusted Domains: 1\] \[Domain: EXAMPLE\] DNS Domain: example.com Netbios name: EXAMPLE Forest name: example.com Trustee DNS name: Client site name: Default-First-Site-Name Domain SID: S-1-5-24-1081533780-4562211299-822531512 Domain GUID: 057f0239-7715-4711-e64b-eb5eeed20e65 Trust Flags: \[0x001d\] \[0x0001 - In forest\] \[0x0004 - Tree root\] \[0x0008 - Primary\] \[0x0010 - Native\] Trust type: Up Level Trust Attributes: \[0x0000\] Trust Direction: Primary Domain Trust Mode: In my forest Trust (MFT) Domain flags: \[0x0001\] \[0x0001 - Primary\] \[Domain Controller (DC) Information\] DC Name: dc1.example.com DC Address: 10.11.0.103 DC Site: Default-First-Site-Name DC Flags: \[0x000003fd\] DC Is PDC: yes DC is time server: yes DC has writeable DS: yes DC is Global Catalog: yes DC is running KDC: yes [Authentication provider: lsa-local-provider] Status: Online Mode: Local system Anyone got any ideas what might be occurring? Thanks in advance!

  Read the article

• Time not propagating to machines on Windows domain

  - by rbeier

  We have a two-domain Active Directory forest: ourcompany.com at the root, and prod.ourcompany.com for production servers. Time is propagating properly through the root domain, but servers in the child domain are unable to sync via NTP. So the time on these servers is starting to drift, since they're relying only on the hardware clock. WHen I type "net time" on one of the production servers, I get the following error: Could not locate a time-server. More help is available by typing NET HELPMSG 3912. When I type "w32tm /resync", i get the following: Sending resync command to local computer The computer did not resync because no time data was available. "w32tm /query /source" shows the following: Free-running System Clock We have three domain controllers in the prod.ourcompany.com subdomain (overkill, but the result of a migration - we haven't gotten rid of one of the old ones yet.) To complicate matters, the domain controllers are all virtualized, running on two different physical hosts. But the time on the domain controllers themselves is accurate - the servers that aren't DCs are the ones having problems. Two of the DCs are running Server 2003, including the PDC emulator. The third DC is running Server 2008. (I could move the PDC emulator role to the 2008 machine if that would help.) The non-DC servers are all running Server 2008. All other Active Directory functionality works fine in the production domain - we're only seeing problems with NTP. I can manually sync each machine to the time source (the PDC emulator) by doing the following: net time \\dc1.prod.ourcompany.com /set /y But this is just a one-off, and it doesn't cause automated time syncing to start working. I guess I could create a scheduled task which runs the above command periodically, but I'm hoping there's a better way. Does anyone have any ideas as to why this isn't working, and what we can do to fix it? Thanks for your help, Richard

  Read the article

• DNS caching server config problem

  - by Alex

  I have a Bind DNS caching-only server setup that is working. I am bringing up a new AD domain controller that will also be a DNS server for that AD but I don't want it responding to any DNS queries except those that are AD related. So, my goal is to leave this caching server as the primary DNS server for stations on the network and have it forward requests for the AD domain to the domain controller. My understanding is that I just need a forward zone for that domain pointing to the domain controller. However it does not seem to be working. So that leaves me to think that my caching server is not forwarding properly. For example, this AD is going to have a naming convention of hostname.mydomain.local. If I do an nslookup and specify the domain controller's IP address as the server, I can query addresses that exist in DNS on that server, such as dc1.mydomain.local. However, queries to my caching server times out (I get a response from the caching server if I query mydomain.local but none of the objects in that domain). Any suggestions? Here is my named.conf file: options { directory "/var/named"; listen-on { 192.168.0.14; 127.0.0.1; }; forwarders { ; ; }; forward first; }; zone "." in { type hint; file "db.cache"; }; zone "0.0.127.in-addr.arpa" in { type master; file "db.127.0.0"; }; //forward zone for mydomain.local zone "mydomain.local" { type forward; forwarders { 192.168.1.21; }; };

  Read the article

• Set up layer 2 vlan between 2 data centres

  - by user41679

  Hello, Our data centre provider operates 2 sites, and we currently have equipment in one and would like to have equipment in the second. They've told me that they operate a layer 2 vlan between the 2 sites over a 20gbit connection, and that they'd just give me ethernet cable at each end to connect the locations. At the current site, we have Cisco 2960 48TC-L switches, all the machines are on a 192.168.x.x subnet and we have cisco firewalls with which we connect to our internet provider with. My question is what would I need to do to connect the 2 sites? could I just plug the ethernet cables the provide into the cisco switches, and have the same switches the other end? would I need to set up a separate internal network on the other side and connect both through the firewalls? Would the cisco switches need special configuration? We expect to maintain a number of connections between the 2 sites, and each site would have its own internal dns name like dc1.xx.com. Sorry if I'm being vague or haven't included enough information, I've a fairly good knowledge of hardware but we're down a netops guy at the moment and I'd like to get both sites on-line ASAP! Thanks in advance!

  Read the article

• How to modify ASCII table in C ? [closed]

  - by drigoSkalWalker

  Like this: My ASCII Chart 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 NUL SOH STX ETX EOT ENQ ACK BEL BS HT LF VT FF CR SO SI 1 DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 2 SP ! " # $ % & ' ( ) * + , - . / 3 0 1 2 3 4 5 6 7 8 9 : ; ? 4 @ A B C D E F G H I J K L M N O 5 P Q R S T U V W X Y Z [ \ ] ^ _ 6 ` a b c d e f g h i j k l m n o 7 p q r s t u v w x y z { | } ~ DEL I want to call a function, alter the ASCII sequence in this function and when it returns, the ASCII sequence back to the original. Thanks in advance! EDIT: What I want is it: I want to change the order of chars, for examble, A is 65, if I want to make A equal a 0? without to make a function to do it, for example, I could accomplish it with a function that compare an array of chars, and store it in another way with the correct value (the new table), but do it is too expensive, is there another way? thanks in advance again!

  Read the article

• Cannot join Win7 workstations to Win2k8 domain

  - by wfaulk

  I am trying to connect a Windows 7 Ultimate machine to a Windows 2k8 domain and it's not working. I get this error: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "example.local": The query was for the SRV record for _ldap._tcp.dc._msdcs.example.local The following domain controllers were identified by the query: dc1.example.local dc2.example.local However no domain controllers could be contacted. Common causes of this error include: Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. The client is in an office connected remotely via MPLS to the data center where our domain controllers exist. I don't seem to have anything blocking connectivity to the DCs, but I don't have total control over the MPLS circuit, so it's possible that there's something blocking connectivity. I have tried multiple clients (Win7 Ultimate and WinXP SP3) in the one office and get the same symptoms on all of them. I have no trouble connecting to either of the domain controllers, though I have, admittedly, not tried every possible port. ICMP, LDAP, DNS, and SMB connections all work fine. Client DNS is pointing to the DCs, and "example.local" resolves to the two IP addresses of the DCs. I get this output from the NetLogon Test command line utility: C:\Windows\System32>nltest /dsgetdc:example.local Getting DC name failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN I have also created a separate network to emulate that office's configuration that's connected to the DC network via LAN-to-LAN VPN instead of MPLS. Joining Windows 7 computers from that remote network works fine. The only difference I can find between the two environments is the intermediate connectivity, but I'm out of ideas as to what to test or how to do it. What further steps should I take? (Note that this isn't actually my client workstation and I have no direct access to it; I'm forced to do remote hands access to it, which makes some of the obvious troubleshooting methods, like packet sniffing, more difficult. If I could just set up a system there that I could remote into, I would, but requests to that effect have gone unanswered.) 2011-08-25 update: I had DCDIAG.EXE run on a client attempting to join the domain: C:\Windows\System32>dcdiag /u:example\adminuser /p:********* /s:dc2.example.local Directory Server Diagnosis Performing initial setup: Ldap search capabality attribute search failed on server dc2.example.local, return value = 81 This sounds like it was able to connect via LDAP, but the thing that it was trying to do failed. But I don't quite follow what it was trying to do, much less how to reproduce it or resolve it. 2011-08-26 update: Using LDP.EXE to try and make an LDAP connection directly to the DCs results in these errors: ld = ldap_open("10.0.0.1", 389); Error <0x51: Fail to connect to 10.0.0.1. ld = ldap_open("10.0.0.2", 389); Error <0x51: Fail to connect to 10.0.0.2. ld = ldap_open("10.0.0.1", 3268); Error <0x51: Fail to connect to 10.0.0.1. ld = ldap_open("10.0.0.2", 3268); Error <0x51: Fail to connect to 10.0.0.2. This would seem to point fingers at LDAP connections being blocked somewhere. (And 0x51 == 81, which was the error from DCDIAG.EXE from yesterday's update.) I could swear I tested this using TELNET.EXE weeks ago, but now I'm thinking that I may have assumed that its clearing of the screen was telling me that it was waiting and not that it had connected. I'm tracking down LDAP connectivity problems now. This update may become an answer.

  Read the article

• Dynamic DNS registration for VPN clients

  - by Eric Falsken

  I've got a VPN server set up in my Active Directory on a remote network. (VPN Server is separate box from DNS/AD) When I dial into the network (client machine is not a member of the AD) the machine does not register its IP or Hostname in the DNS. I've played with all possible combinations of DHCP and RRAS-allocated IP pools, and none of them seem to cause my client to register. Is it because my client has to be a member of the domain? Are there some security settins I can tweak so that it can register its hostname/ip? I've looked in the event logs (System and Security) for the AD, DNS, DHCP, RRAS, and the client machine, and don't see anything relating to DNS Registration. Here's the IPConfig on the client machine (once connected): PPP adapter My VPN Name: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : My VPN Name Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.22(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.52 <- DC1 192.168.1.53 <- DC2 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• How to validate referral support implemented for Active Dircetory server?

  - by user146560

  Please suggest me some utility or application, using which i want to test referral settings done. I want to test cross forest referenced reference. Among two DNS say 1 firstDNS.com user([email protected]) 2 SecondDNS.com user([email protected]) Below java code written to test active directory server setting. public void authenticateUser(String user, String password, String domain) throws AuthenticationException, NamingException { List<String> ldapServers = findLDAPServersInWindowsDomain("first.com"); if (ldapServers.isEmpty()) throw new NamingException("Can't locate an LDAP server (try nslookup type=SRV _ldap._tcp." + "first.com"+ ")"); Hashtable<String, String> props = new Hashtable<String, String>(); String principalName = "testUserFirst"+ "@" + "First.com"; props.put(Context.SECURITY_PRINCIPAL, principalName); props.put(Context.SECURITY_CREDENTIALS, password); props.put(Context.REFERRAL,"follow"); //props.put(Context.SECURITY_AUTHENTICATION, "anonymous"); Integer count = 0; for (String ldapServer : ldapServers) { try { count++; DirContext ctx = LdapCtxFactory.getLdapCtxInstance("ldap://" + ldapServer, props); SearchControls searchCtls = new SearchControls(); //Specify the attributes to return String returnedAtts[]={"sn","givenName","mail"}; searchCtls.setReturningAttributes(returnedAtts); //Specify the search scope searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE); //specify the LDAP search filter String searchFilter = "(&(objectClass=user)(sAMAccountName=" testUserSecond)(userPassword=usertest@3))"; //Specify the Base for the search String searchBase = "DC=second,DC=com"; //initialize counter to total the results int totalResults = 0; // Search for objects using the filter NamingEnumeration<SearchResult> answer = ctx.search(searchBase, searchFilter, searchCtls); return; } catch (CommunicationException e) { // this is what'll happen if one of the domain controllers is unreachable if (count.equals(ldapServers.size())) { // we've got no more servers to try, so throw the CommunicationException to indicate that we failed to reach an LDAP server throw e; } } } } private List<String> findLDAPServersInWindowsDomain(String domain) throws NamingException { List<String> servers = new ArrayList<String>(); Hashtable<String, String> env = new Hashtable<String, String>(); env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory"); env.put("java.naming.provider.url", "dns://"); DirContext ctx = new InitialDirContext(env); Attributes attributes = ctx.getAttributes("_ldap._tcp." + domain, new String[] { "SRV" }); // that's how Windows domain controllers are registered in DNS Attribute a = attributes.get("SRV"); for (int i = 0; i < a.size(); i++) { String srvRecord = a.get(i).toString(); // each SRV record is in the format "0 100 389 dc1.company.com." // priority weight port server (space separated) servers.add(srvRecord.split(" ")[3]); } ctx.close(); return servers; }

  Read the article

• Finding a person in the forest

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved finding a person in the forest or Limiting the AD result in SharePoint People Picker There are times when we need to limit the SharePoint audience of certain farms or servers or site collections to a particular audience. One of my experiences involved limiting access to US citizens, another to a particular location. Now, most of us – your humble servant included – are not Active Directory experts – but we must be able to handle the “audience restrictions” as required. So here is how it’s done in a nutshell. Important note. Not all could be done in PowerShell (at least not yet)! There are no Windows PowerShell commands to configure People Picker. The stsadm command is: stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv ADQuery –url http://somethingOrOther Note the long-hyphenated property name. Now to filling the ADQuery.   LDAP Query in a nutshell Syntax LDAP is no older than SQL and an LDAP query is actually a query against the LDAP Database. LDAP attributes are the equivalent of Database columns, so why do we have to learn a new query language? Beats me! But we must, so here it is. The syntax of an LDAP query string is made of individual statements with relational operators including: = Equal <= Lower than or equal >= Greater than or equal… and memberOf – a group membership. ! Not * Wildcard Equal and memberOf are the most commonly used. Checking for absence uses the ! – not and the * - wildcard Example: (SN=Grant) All whose last name – SurName – is Grant Example: (!(SN=Grant)) All except Grant Example: (!(SN=*)) all where there is no SurName i.e SurName is absent (probably Rappers). Example: (CN=MyGroup) Common Name is MyGroup.  Example: (GN=J*) all the Given Names that start with J (JJ, Jane, Jon, John, etc.) The cryptic SN, CN, GN, etc. are attributes and more about them later All the queries are enclosed in parentheses (Query). Complex queries are comprised of sets that are in AND or OR conditions. AND is denoted by the ampersand (&) and the OR is denoted by the vertical pipe (|). The general syntax is that of the Prefix polish notation where the operand precedes the variables. E.g +ab is the sum of a and b. In an LDAP query (&(A)(B)) will garner the objects for which both A and B are true. In an LDAP query (&(A)(B)(C)) will garner the objects for which A, B and C are true. There’s no limit to the number of conditions. In an LDAP query (|(A)(B)) will garner the objects for which either A or B are true. In an LDAP query (|(A)(B)(C)) will garner the objects for which at least one of A, B and C is true. There’s no limit to the number of conditions. More complex queries have both types of conditions and the parentheses determine the order of operations. Attributes Now let’s get into the SN, CN, GN, and other attributes of the query SN – is the SurName (last name) GN – is the Given Name (first name) CN – is the Common Name, usually GN followed by SN OU – is an Organization Unit such as division, department etc. DC – is a Domain Content in the AD forest l – lower case ‘L’ stands for location. Jerusalem anybody? Or Katmandu. UPN – User Principal Name, is usually the first part of an email address. By nature it is unique in the forest. Most systems set the UPN to be the first initial followed by the SN of the person involved. Some limit the total to 8 characters. If we have many ‘jsmith’ we have to somehow distinguish them from each other. DN – is the distinguished name – a name unique to AD forest in which it lives. Usually it’s a CN with some domain or group distinguishers. DN is important in conjunction with the memberOf relation. Groups have stricter requirement. Each group has to have a unique name - its CN and it has to be unique regardless of its place. See more below. All of the attributes are case insensitive. CN, cn, Cn, and cN are identical. objectCategory is an element that requires special consideration. AD contains many different object like computers, printers, and of course people and groups. In the queries below, we’re limiting our search to people (person). Putting it altogether Let’s get a list of all the Johns in the SPAdmin group of the Jerusalem that local domain. (&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local)) The memberOf=cn=SPAdmin uses the cn (Common Name) of the SPAdmin group. This is how the memberOf relation is used. ‘SPAdmin’ is actually the DN of the group. Also the memberOf relation does not allow wild cards (*) in the group name. Also, you are limited to at most one ‘OU’ entry. Let’s add Marvin Minsky to the search above. |(&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local))(CN=Marvin Minsky) Here I added the or pipeline at the beginning of the query and put the CN requirement for Minsky at the end. Note that if Marvin was already in the prior result, he’s not going to be listed twice. One last note: You may see a dryer but more complete list of attributes rules and examples in: http://www.tek-tips.com/faqs.cfm?fid=5667 And finally (thus negating the claim that my previous note was last), to the best of my knowledge there are 3 more ways to limit the audience. One is to use the peoplepicker-searchadcustomfilter property using the same ADQuery. This works only in SP1 and above. The second is to limit the search to users within this particular site collection – the property name is peoplepicker-onlysearchwithinsitecollection and the value is yes (-pv yes) And the third is –pn peoplepicker-serviceaccountdirectorypaths –pv “OU=ou1,DC=dc1…..” Again you are limited to at most one ‘OU’ phrase – no OU=ou1,OU=ou2… And now the real end. The main property discussed in this sprawling and seemingly endless monogram – peoplepicker-searchadcustomquery - is the most general way of getting the job done. Here are a few examples of command lines that worked and some that didn’t. Can you see why? C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (!Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,OU=OUMid,OU=OUTop,DC=TopDC,DC=MidDC,DC=BottomDC) Command line error. Too many OUs C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully.   That’s all folks!

  Read the article

• Dynamic DNS registration for VPN clients

  - by Eric Falsken

  I've got a VPN server set up in my Active Directory on a remote network. (VPN Server is separate box from DNS/AD) When I dial into the network (client machine is not a member of the AD) the machine does not register its IP or Hostname in the DNS. I've played with all possible combinations of DHCP and RRAS-allocated IP pools, and none of them seem to cause my client to register. Is it because my client has to be a member of the domain? Are there some security settins I can tweak so that it can register its hostname/ip? I've looked in the event logs (System and Security) for the AD, DNS, DHCP, RRAS, and the client machine, and don't see anything relating to DNS Registration. Here's the IPConfig on the client machine (once connected): PPP adapter My VPN Name: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : My VPN Name Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.22(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.52 <- DC1 192.168.1.53 <- DC2 NetBIOS over Tcpip. . . . . . . . : Enabled Edit: It looks like my clients are not recieving the DHCP Scoope Options. I found this great article in Microsoft's KB. So the problem here is that the VPN Server "pre-reserves" the DHCP addresses, but then you have to add the DHCP Relay Agent to relay the secondary request for scope options. My problem is that the DHCP Relay Agent isn't relaying to the local DHCP server (same box as the VPN/RRAS). I've configured the DHCP Relay Agent according to this KB, but it dosn't work for a local DHCP server. (I see the request count increasing, but no responses) I was able to get everything working by specifying the DNS server and domain name in the VPN connection properties on the client. But am still unable to assign it (or the default gateway) dynamically via DHCP. The client also has to be a member of the remote domain.

  Read the article

< Previous Page | 1 2 3  | Next Page >