Search Results

Search found 53 results on 3 pages for 'jbod'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

• Mac Pro Boot Camp w/ RAID card

  - by churnd

  If I configure a Mac Pro with a RAID card and two 15k RPM drives, and leave the drives JBOD (no RAID configured), can I install Windows on the second drive? I guess the question really is, does Windows recognize the RAID card? I know it's probably just a rebadged LSI or Adaptec but wanted to see if anyone's actually done it...

  Read the article

• Do 7.2k SATA drives and a hardware raid controller always end with trouble?

  - by xelco52

  I'm reading the FreeNAS userguide and came across the statement: Note that hardware RAID configured as JBOD may still detach disks that do not respond in time; and as such may require TLER/CCTL/ERC-enabled disks to prevent drive dropouts. I'm using a '3Ware 9550SX-8LP RAID Controller' and see quite a few stories of people successfully…

  Read the article

• Drives will not show up on PCI RAID card in Ubuntu 12.04 LTS

  - by Mechh69

  Computer specs Intel E8200 Dual Core MSI G45M MB Ultra U12-40739 PCI Expansion Card - 2 SATA Internal Ports, 1.5Gbps, RAID 0, 1, JBOD 6 GB DDR2 Q1. I installed Ubuntu 12.04 LTS and Amahi, for using Grey Hole, last night. The two disc on the raid card do not show up under Ubuntu 12.04LTS but they do show up under grey hole so I know the drives…

  Read the article

• Home ZFS based NAS...What processor/chipset to use?

  - by MrBlargityBlarg

  So, I'm building a home/personal NAS. My plan is to expose both SMB fileshares for sharing files/media between hosts, but also to carve an iSCSI target LUN out of it for use by VMWare as a datastore. I want to use ZFS (software RAID) so that means I'll either be using FreeNAS, Solaris Express, or OpenIndiana. My question is basically: How much…

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS,…

  Read the article

• Practical RAID Performance?

  - by wag2639

  I've always thought the following to be a general rule of thumb for RAID: RAID 0: Best performance for READ and WRITE from stripping, greatest risk RAID 1: Redundant, decent for READ (I believe it can read from different parts of a file from different hard drives), not the best for WRITE RAID 0+1 (01): combines redundancy of RAID 1 with…

  Read the article

• Advantage of using nexenta vs. OpenSolaris

  - by jotango

  I am currently building a NAS for about 24 TB of storage. Video files, slow access, long term storage. No performance issues. I am currently undecided between buying a JBOD case and installing OpenSolaris (because of ZFS), or purchasing a Nexenta license. The difference is about $ 12.500 for licenses over three years. What would you see…

  Read the article

• Can I move a one drive RAID 0 array on a PERC 6 to another server?

  - by zippy

  We have a Dell Poweredge 2970 with a PERC 6/i RAID controller. We have a one drive RAID 0 array (we wanted to add the drive as a JBOD but the PERC forces you to create an array to access it from the PERC). Can we take the one drive RAID 0 and move it to a new server (one that doesn't have a PERC)? Since there's only one drive in the…

  Read the article

• insert system disk error after switchting SATA cables

  - by Matthias

  I have 5 hard disks built in my computer, two connected by IDE cables, three by SATA. Today I had to return two of the SATA cables to my room mate. So I grabbed another one I had floating around and connected the remaining disk by unplugging my DVD R/W. Now I receive the 'insert system disk and press enter' error after booting.…

  Read the article

• Windows 2008 as home file server and more

  - by Christian W

  I currently have a freenas-unit as a NAS, and a Win2k8R2-unit as server. However I would like to consolidate these to units in one. What I really like about the freenas-unit is the ZFS filesystem. And the only reason I care about the ZFS filesystem is the easy way I can grow an existing filesystem just by inserting a new drive.…

  Read the article

• Achieving/maxing out 1GBPS connectivity on a nginx server

  - by Ansell Cruz

  This page (http://www.remsys.com/nginx-on-1gbps) claims that it can max out a 1gbps line using JBOD setup and no raid. Currently I'm on a 1gbps dedicated port and I'm on raid 10 (4x2TB - the disks that comes with 100tb.com servers). Currently I'm only peaking at 500-550mbps. wa% would show something around 20% everytime. I'm…

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them…

  Read the article

• RAID 5 heavy IO hard freezes Ubuntu: Why?

  - by Luke has no name

  I have a software RAID 5 partition on LVM in Ubuntu (desktop, actually, but I'm using it as a server). I have been rsyncing a ton of data to it, and the computer was hard freezing, as in I needed to press "Reset". So I thought it was rsync. But I decided I'd try a dd if=/dev/zero of=/path/to/raid5 and sure enough, the…

  Read the article

• How to disable the RAID in x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System…

  Read the article

• gpfs: adding a new nsd server to a cluster

  - by alessandra

  I have a gpfs cluster composed by 10 linux nodes, managed by a primary server A, which also act as nsd server for a first stack of disks. I attached a new jbod to one of the nodes (call it node B), which I would like to become a nsd server for this new stack of disks, but still be included in the cluster so that…

  Read the article

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the…

  Read the article

• Installing SATA dvd burner on machine with no spare SATA ports/connectors

  - by Faheem Mitha

  Greetings. I have the following motherboard Tyan Thunder K8WE S2895A2NRF Motherboard - extended ATX - nForce Pro 2200/2050 - Socket 940 - UDMA133, Serial ATA-300 (RAID) - 2 x…

  Read the article

• Using mixed disks and OpenFiler to create RAID storage

  - by Cylindric

  I need to improve my home storage to add some resilience. I currently have four disks, as follows: D0: 500Gb (System, Boot) D1: 1Tb D2: 500Gb D3: 250Gb There's a mix of partitions on there, so it's not JBOD, but data is pretty spread out and not redundant. As this is my primary PC and I don't…

  Read the article

• 24TB RAID 6 configuration

  - by Phil

  I am in charge of a new website in a niche industry that stores lots of data (10+ TB per client, growing to 2 or 3 clients soon). We are considering ordering about $5000 worth of 3TB drives (10 in a RAID 6 configuration and 10 for backup), which will give us approximately 24 TB of production…

  Read the article

• Is current SATA 6 gb/s equipment simply unreliable?

  - by korkman

  I have a 45-disk array of Seagate Barracuda 3 TB ST3000DM001 (yes these are desktop drives I'm aware of that) in a Supermicro sc847 JBOD, connected via LSI 9285. I have found a solution for the problem description below by reducing speed via MegaCli -PhySetLinkSpeed -phy0 2 -a0; for i in…

  Read the article

• XenServer 5.5 running WHS.. trying to add local or network printer/scanner/copier

  - by ProstheticHead

  Hi guys. Just wondering if anyone has prior experience in sharing a multifunction printer across a (mostly windows) network? My situation at the minute is complicated.. I DID have the printer attached directly to a Windows Home Server box and was able to scan to a share and print across…

  Read the article

• How to diagnose storage system scaling problems?

  - by Unknown

  We are currently testing the maximum sequential read throughput of a storage system (48 disks total behind two HP P2000 arrays) connected to HP DL580 G7 running RHEL 5 with 128 GB of memory. Initial testing has been mainly done by running DD-commands like this: dd…

  Read the article

• FreeNAS pool configuration - RAID1 + other drives

  - by trnelson

  Simple questions, really. I found this answer with a similar setup, but not sure it answers my question. If it does, I'm curious why since the answer seems a bit unsure: ZFS Hard Drive Configuration in FreeNAS I'm building a server which will be used primarily for…

  Read the article

• Server 2012 - transparent SMB failover without shared discs, possible?

  - by TomTom

  here is the scenario - there is a small set (200gb around) of data that I HAVE to keep available. Those are basically shared VHD images that serve as master images for a lot of our VM's - they then run in differential discs off those. The whole set is "mostly read…

  Read the article

• LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

  - by Andy Shinn

  I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate…

  Read the article

< Previous Page | 1 2 3  | Next Page >