Search Results

Search found 131 results on 6 pages for 'leds'.

Page 2/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

  • HP does not power off after shutdown (Vista)

    - by tommi
    My HP d330 does not properly shutdown, after Vista "shutting down" message the lcd screen goes black, but both HD + Power Leds remain on.. Any ideas? No entries in EventViewer about this. Keyboard leds no more work after this partial shutdown so I assume hardware is partially shutdown..? Same problem occurs when I choose Sleep from shutdown menu

    Read the article

  • POV Christmas Tree Is a Holiday-Themed DIY Electronics Project

    - by Jason Fitzpatrick
    If you’re looking for an electronics project with a bit of holiday cheer, this clever POV Christmas tree combines LEDs, motors, and a simple vision hack to create a glowing Christmas tree. POV (or Persistence Of Vision) hacks rely on your visual circuit’s lag time. By taking advantage of that lag POV displays can create the illusion of shapes and words where there are none. In the case of this Christmas tree hack a spinning set of LED lights creates the illusion of a Christmas tree when, in reality, there is just a few LEDs suspended in space by wire. It’s not a beginner level project by any means but it is a great way to practice surface mounting electronics and polish up your PCB making skills. Hit up the link below for the full tutorial. POV Christmas Tree [Instructables] HTG Explains: Do You Really Need to Defrag Your PC? Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone How To Migrate Windows 7 to a Solid State Drive

    Read the article

  • MacBook Pro battery capacity 65K mAh

    - by Alexander Gladysh
    I have a 15" MacBook Pro 3.1 (that is Late 2007 model AFAIR). I've bought it new a couple of years ago. Recently its on-battery power lifespan became very short (30 to 10 minutes). When my notebook turns itself off due to "low battery" and I press the small button on the battery itself, all LED lights are alight, indicating full charge. When I plug in the power adapter, my Mac displays that "battery is fully charged, finishing charging process" (I have a Russian OS X 10.5.7, so that is a rough translation), but the LEDs on battery itself display (seemingly accurate) status that there are one or two "LEDs still not charged". My battery have as few as 37 recharge cycles (yes, I've neglected calibration over the time I've used it). Battery info programs like iBatt2 report battery capacity of 65 337 mAh (with by-design capacity of 5600 mAh). I get it that something went wrong with battery electronics. I've tried resetting my Mac's PRAM and SMC, it did not changed anything. Now I'm trying to recalibrate the battery, but looks like it does not help as well. Will try to recalibrate it several times in a row. I'd buy a new battery if I knew if it is battery fault, not a notebook's. Any suggestions? Update: After recalibration, my battery status now displays battery capacity of 1500 mAh. But with every recalibration (or simply when I use notebook without power adapter plugged in) this number changes in the range from 200 mAh to 1700 mAh. LEDs on battery now are synchronous with what nodebook thinks on the charge level. Also I've noticed that cycle count changes rather slowly. It is now 39, it was 37 when I've started recalibration, and I went through the process at least ten times... So, the main question is: does it look like that replacing the battery would help me (or does it look like this is notebook's problem)? I guess I should try replacing the battery.

    Read the article

  • Kernel hacking methodology - how to find out where to hack the linux kernel

    - by Flavius
    I have a throw-away cheap laptop I'd like to twiddle around, a Thinkpad SL 500. What bothers me are two leds, the one for wireless connectivity, and the one for hibernation, which don't light up at all, although they're functional, I've tried it on windows. So I would like to write a kernel driver for them, nothing big, it just looks like a good idea to play around with the kernel. My question is what methodology should I follow systematically to find out what devices are responsible for those leds (in general, not necessarily specific to my hardware), and what drivers are responsible for the other two leds that work, bluetooth and the battery indicator? And when I say methodology, I really mean the methodology, step by step, with reasons for each step, like in the answer I've gave to someone else over here: What does && mean in void *p = &&abc; I am profficient at fgrepping through big code repositories, using static code analysers & co, but I think my lack of hardware knowledge hinders me on this problem. PS: I'm using ArchLinux, so almost the latest kernel version.

    Read the article

  • Gateway GT5220 Boot/POST Failure

    - by John Rudy
    I have a Gateway GT5220 I'm troubleshooting. It is, in fact, the machine I just gave my father for his birthday a couple months ago. (Prior to that, it was my home PC. My home PC is now the MacBook on which I'm writing this.) Before going any further, I suspect that the answer will be, "It's worse than that, it's dead, Jim, it's dead, Jim, it's dead, Jim." At least, mobo and/or CPU. The initial symptoms were as follows: Turn on power All fans fire up (thus making it so I can't hear if the hard drive is spinning or not, nor are my hands sensitive enough anymore to feel it) No LEDs remained lit on the front panel. (Initially, the hard drive indicator flashed briefly.) No beep, no video, no nothing. Following some advice I found here, I tried to "drain the stored power." After following those steps, the new symptoms were: Turn on power All fans fire up The front panel LEDs remained lit! After about 20, maybe 30 seconds, we had video! Sort of. We got to the Gateway splash/POST screen, which appeared thoroughly corrupted. How corrupted? Well, I imagine it's what a POST screen would look like after reading the wrong passage out of the Necronomicon: It stayed there. I gave it at least 5, maybe 6 minutes, and it didn't move. So I shut her down, started her up again, and now (this is where we currently stand, symptomatically) we have this: Turn on power All fans fire up The front panel LEDs remain lit No video, no beep, no nothing. I'm a software guy; haven't done real hardware troubleshooting in years. My gut tells me that the mobo and/or CPU is fried, and unfortunately my gut didn't get to be as big as it is being wrong all the time. :( In addition to the link above, I have read all of the following (trying to save you some LMGTFY trouble): Gateway Support POST Error Messages and Handling About a zillion (useless) POST beep code sites A kioskea.net post indicating that most likely we're at what I consider "total loss" (mobo and/or CPU) My questions: Are there any conditions other than mobo/CPU that could cause symptoms like these? Is it worth my time to try the next hardware troubleshooting step?(IE, remove all non-critical hardware from the machine, try to boot, systematically replace one by one until we find the failing component) Which mobos will fit in the Gateway GT5220 case (with rear ports correctly aligned)? (Why this is not a dupe: I wouldn't have posted this question if it hadn't been for the funkadelic possessed video display on the one occasion we got video out. I think that justified this not being an exact dupe. Of course, if the community overrules, I will understand.)

    Read the article

  • Juniper J4350 out of order

    - by Benjamin Baron
    I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

    Read the article

  • android : how to run a shell command from within code

    - by ee3509
    I am trying to execute a command from within my code, the command is "echo 125 /sys/devices/platform/flashlight.0/leds/flashlight/brightness" and I can run it without problems from adb shell I am using Runtime class to execute it : Runtime.getRuntime().exec("echo 125 > /sys/devices/platform/flashlight.0/leds/flashlight/brightness"); However I get a permissions error since I am not supposed to access the sys directory. I have also tried to place the command in a String[] just in case spaces caused a problem but it didn't make much differense. Does anyone know any workaround for this ?

    Read the article

  • Make a USB Device, Control It In Java

    - by yar
    I'm thinking about making a physical controller (device?) with knobs, buttons, and LEDs. I'd like to interact with it using Java (respond to the knobs, light up LEDs, etc). The reason I mention Java is two-fold: first, I know Java well1. Second, I've written the rest of the program I need to interface with in Java (though there are ways to talk to the Java program from another language). I would like the device to connect via USB and be (computer-)platform independent. I haven't the slightest idea of where to start, except to start reading the Arduino website. Is this my best/only option? Is there something better suited for communicating with Java? Note: I know that Arduino has something to do with Java (not sure what), but it seems like code must be written in a subset of C. How would I get moving on this topic? 1 - No laughter, please.

    Read the article

  • As a programmer, should I know low and high-level programming languages?

    - by job
    I been contacted to do some work remote controlling LEDs displays over TCP/IP, but my experience and preparation is mostly about high-level programming language. I said that to the person who contact me about the work and he told me that: "if you call yourself a programmer you should know all these things" Should a programmer really know the details of low-level programming? Or can I treat it as a black box concept, as theoretical knowledge but not necessarily doing it or implementing low level language solutions, having in mind that low-level programming is not my expertise?

    Read the article

  • switchless Infiniband between two servers on RHEL 6.3

    - by exfizik
    I have 2 servers running RHEL 6.3 which have 2 port Infiniband cards >lspci | grep -i infini 07:00.0 InfiniBand: QLogic Corp. IBA7322 QDR InfiniBand HCA (rev 02) I'm interested in connecting them directly to each other bypassing an Infiniband switch (which I don't have). Quick googling showed that at least in some configurations it's possible. I installed all RedHat Infiniband packages with yum groupinstall "Infiniband Support". However, ibv_devinfo shows that both ports in each card are down, which indicates that cables are not connected. But the cable is connected, although the LEDs are off on the cards (not a good sign). Another source of confusion for me is that according to this, RedHat doesn't come with OFED packages and I'm slightly hesitant to install them from source due to the lack of RedHat support for them... So where am I going with this? The questions I have are: is it possible to have a switchless/direct Infiniband connection between two servers the way I described above? If it's possible, do I have to use the OFED packages or can I configure everything with just the packages coming with RHEL. Why are the LEDs off on my servers even though the cable is connected? Any additional input/advice/pointers would be appreciated. P.S. I followed this guide for installation instructions. The Infiniband cards are clearly recognized by my OS and the rdma service is running. Update: I have opensm installed. When I run it it says: OpenSM 3.3.13 Command Line Arguments: Log File: /var/log/opensm.log ------------------------------------------------- OpenSM 3.3.13 Entering DISCOVERING state Using default GUID 0x1175000076e4c8 SM port is down and stays at that point.

    Read the article

  • Router not connecting to the internet

    - by Peter
    I had a weird problem this morning with my router - it's an Alice Gate VoIP 2 Plus WI-FI - not connecting to the internet after more or less 1 hour online (I'm always connected with the ethernet cable). The led status lights for Power, WI-FI, ADSL, Internet, Service should be on in order to be connected and navigate online. The problem was that the leds ADSL, Internet were off and I did not know why because it never happened before. I looked at the stats in the settings and the numbers for Bytes/Packages for both Sent/Received were there and increasing but I couldn't connect to the internet. I called tech support, they checked and told me to keep the router on for 48 hours because they were checking it. I've reset it twice before and after I called tech support and it still did not work so after about 2 hours of waiting I tried connecting using WI-FI and the leds 'magically' turned on, first the ADSL and Internet(Internet led always turns on last). At this point I'm curious what could of caused this and I'm doubting that the tech-support guys did something. What could of been the problem with the ethernet cable not connecting in the first place? It always works. What do the tech support guys normally do when they tell me to keep the router on so they can 'check it'? PS: I'm using ubuntu 32 bit

    Read the article

  • Python with Wiimote using pywiiuse module

    - by Anon
    After seeing the abilities and hackibility of wiimotes I really want to use it in my 'Intro to programming' final. Everyone must make a python program and present it to the class. I want to make a game with pygame incorporating a wiimote. I found pywiiuse which is a very basic wrapper for the wiiuse library using c types. I can NOT get anything beyond LEDs and vibrating to work. Buttons, IR, motion sensing, nothing. I've tried different versions of wiiuse, pywiiuse, even python. I can't even get the examples that came with it to run. Here's the code I made as a simple test. I copied some of the example C++ code. from pywiiuse import * from time import sleep #Init wiimotes = wiiuse_init() #Find and start the wiimote found = wiiuse_find(wiimotes,1,5) #Make the variable wiimote to the first wiimote init() found wiimote = wiimotes.contents #Set Leds wiiuse_set_leds(wiimote,WIIMOTE_LED_1) #Rumble for 1 second wiiuse_rumble(wiimote,1) sleep(1) wiiuse_rumble(wiimote,0) #Turn motion sensing on(supposedly) wiiuse_motion_sensing(wiimote,1) while 1: #Poll the wiimotes to get the status like pitch or roll if(wiiuse_poll(wiimote,1)): print 'EVENT' And here's the output when I run it. wiiuse version 0.9 wiiuse api version 8 [INFO] Found wiimote [assigned wiimote id 1]. EVENT EVENT Traceback (most recent call last): File "C:\Documents and Settings\Nick\Desktop\wiimotetext.py", line 26, in <mod ule> if(wiiuse_poll(wiimote,1)): WindowsError: exception: access violation reading 0x00000004 It seems each time I run it, it prints out EVENT 2-5 times until the trace back. I have no clue what to do at this point, I've been trying for the past two days to get it working. Thanks!

    Read the article

  • How to fix an external HDD?

    - by Bogdan
    Hi, I have a Verbatim 1080p external HDD (47535 model). When i plug it in, the power and the hdd leds are lighting, but it has an anoying sound every half second or so. Is there any posibility to fix it OR retrieve my data? Or is a mechanical problem? Thanks!

    Read the article

  • How to recover data from an external HDD?

    - by Bogdan
    Hi, I have a Verbatim 1080p external HDD (47535 model). When i plug it in, the power and the hdd leds are lighting, but it has an anoying sound every half second or so. Is there any posibility to fix it OR retrieve my data? Or is a mechanical problem? Thanks!

    Read the article

  • How to recover data from an external HDD?

    - by Bogdan
    Hi, I have a Verbatim 1080p external HDD (47535 model). When i plug it in, the power and the hdd leds are lighting, but it has an anoying sound every half second or so. Is there any posibility to fix it OR retrieve my data? Or is a mechanical problem? Thanks!

    Read the article

  • How does a so-called "LED monitor" work?

    - by sharptooth
    Every here and there I hear about new LED monitors. I imagined that they were really LED monitors - that their screens were formed of multiple tiny LEDs that lit up in a controlled manner to form an image. Yet turns out they are LED backlit LCD monitors. What's the difference between this and a trusty Belinea 10 17 51 I've been using for the five years already?

    Read the article

  • Ethernet run tests green but won't connect

    - by Simon Gillbee
    I have a single ethernet run at home that I just added. I have a cable tester that tests for pin/pair crossover or miswired pines. The entire line tests green (all 4 LEDs light up green on the tester) but I can't get any PC to connect through the link. No link light on the ethernet connection. Any simple tests/fixes, or do I rip out the wall sockets and do it again?

    Read the article

  • Ethernet run tests green but won't connect

    - by Simon Gillbee
    I have a single ethernet run at home that I just added. I have a cable tester that tests for pin/pair crossover or miswired pins. The entire line tests green (all 4 LEDs light up green on the tester) but I can't get any PC to connect through the link. No link light on the ethernet connection. Any simple tests/fixes, or do I rip out the wall sockets and do it again?

    Read the article

  • What are the possible causes of a not-booting motherboard with drdebug 00 code?

    - by Dutow
    I have pursached a new Asrock Z68 Extreme4 motherboard with an i7 2600K and 2x4GB ADATA DDR3. My problem is that it doesn't boot or beep, and the onboard drdebug led constantly displays "00" - which is according to the board's manual, "not used". The power cables are probably conntecting, because if I disconnect the 4+4 or 20+4 cable, nothing is displayed on the leds. Has anybody seen this error? What are the possible causes?

    Read the article

  • DIY Sunrise Alarm Clock Sports a Polished Build and Perfect Time Keeping

    - by Jason Fitzpatrick
    We’ve seen our fair share of sunrise simulators, but by far this one is the most polished build–everything from the atomic clock circuit to the LEDs are all packed cleanly in a frosted acrylic case. Renaud Schleck, the tinker behind the build, describes the guts: This is an alarm clock simulating the sunrise, which means that a few minutes before the alarm goes off, it shines some light whose brightness increases over time. The alarm clock is built around a MSP430G2553 microcontroller compatible with the MSP430 Launchpad from Texas Instrument. It features a DCF77 module which sets the clock automatically through radio waves. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

    Read the article

  • DIY Weather-Aware Umbrella Stand Signals Stormy Weather

    - by Jason Fitzpatrick
    This clever DIY project adds ambient weather notification to your umbrella stand–simply walk by it on your way out the door to get a subtle reminder to take your umbrella. The clever setup involves a hobby board, motion detection, and LEDS to a rather clever end. As you walk by the semi-translucent umbrella stand all of it is mounted in, it lights up to indicate the weather conditions. Blue indicates the forecast for the day shows no sign of rain, green indicates rain, and red indicates thunderstorms. Check out the above video to see the hardware involves and the stand in action; hit up the link below for the full build guide including code. DIY Umbrella Stand Hack with Rain Alert [via Make] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

  • How to Create Steel Wool Light Paintings [Video]

    - by Jason Fitzpatrick
    Steel Wool Light Paintings are like regular long-exposure light paintings but they replace LEDs with flaming balls of steel; watch this video to see how to safely and successfully light paint with steal wool. In this video Benjamin Von Wong explains how to set up a steel wool light painting photoshoot, how to create your steel wool light source, and how to do it all safely without burning down your neighborhood or lighting nearby pedestrians on fire. [via DIYPhotography] What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

    Read the article

  • Nicest way to map rgb colors from html to led

    - by back_ache
    I have attached an rgb led to a color picker on a webpage and have hit the obvious problem that though the led is 8-bit like html the color rendition is very different so with the more subtle shades the led values for the color are wildly different to the html values. The brute-force method would be for me to have a lookup-table on the webserver to map the two sets of values but would ideally like to do it more elegantly Before I start listing all my 101 ideas for doing this I wondered if anyone else had come across the issue, the end-game would be to be able to abstract the color-rendition of different leds and make it available as a webservice (html value and device id in, led value out)

    Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >