Search Results

Search found 22914 results on 917 pages for 'solid state drive'.

Page 2/917 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Western Digitial My Book: Can't access the data on the drive

  - by Bryan Denny

  My girlfriend has this external hard drive by Western Digital called a My Book. When the external drive is connected, it does not show it as an accessible disk drive on the computer. However, it shows up fine in Device Manager: I can also see it in Disk Management, but the volume is not mapped to a drive letter, nor can I change the drive letter: It only gives me access to Delete Volume: I would rather not lose the data on the drive if possible. What can I do from here to get to the data? Things I've tried/know: Uninstall drivers and re-install them Device does the same thing when attach to either her Win7 laptop or my Win8 laptop I don't think there's an issue with the HDD itself. No clicking noises, etc. I ran Western Digital Data LifeGuard Diangostics (DLGDIAG) and the SMART Status was a "PASS", all of the SMART Disk Information looked fine. I haven't had the time to run the diag tests yet but I do not believe it's a mechanical issue. The hard drive is inside of an enclosure, I have not attempted to pry the drive out yet. How can I get Windows to properly detect this drive?

  Read the article

• Save GMail attachments directly to Google Drive

  - by Gopinath

  What makes Google Drive attractive is it ability to play nice with other Google offerings like Google Docs, GMail, Android mobiles & tablets. Google Drive is well integrated with Google Docs and every document you create is automatically saved on Google Drive. Google Drive’s integration with other services like GMail may be in progress at Google, but enthusiastic community developers has released a plugin to integrate with GMail. The Google Chrome plugin “Gmail Attachments To Drive” lets you automatically save GMail attachments to Google Drive with a single click. Once the plugin is installed it adds a link “Save To Drive” next to each attachment displayed on GMail and on clicking, it automatically saves the files to Google Drive. I tested the plugin by saving attachments like PDFs, MS Word documents and Images to Google Drive and it worked very well.  I don’t have any complaints on the plugin except couple of feature requests. If the plugin can provide option “Save All Files To Drive” it will be very much helpful to save all attachment of an email at one shot. Also it would be great if the developer can extend it to Firefox too. Anyways it’s a great plugin for Google Drive users and worth checking it out. Install Gmail Attachments To Drive for Google Chrome

  Read the article

• Move smaller hard drive to partition on a larger hard drive

  - by bluejeansummer

  My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu. I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot. Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority. In case it helps, both drives use 2.5" PATA, and I have a 1 TB external drive available if it's needed.

  Read the article

• IIS 7 and ASP.NET State Service Configuration

  - by Shawn

  We have 2 web servers load balanced and we wanted to get away from sticky sessions for obvious reasons. Our attempted approach is to use the ASP.NET State service on one of the boxes to store the session state for both. I realize that it's best to have a server dedicated to storing sessions but we don't have the resources for that. I've followed these instructions to no avail. The session still isn't being shared between the two servers. I'm not receiving any errors. I have the same machine key for both servers, and I've set the application ID to a unique value that matches between the two servers. Any suggestions on how I can troubleshoot this issue? Update: I turned on the session state service on my local machine and pointed both servers to the ip address on my local machine and it worked as expected. The session was shared between both servers. This leads me to believe that the problem might be that I'm not using a standalone server as my state service. Perhaps the problem is because I am using the ip address 127.0.0.1 on one server and then using a different ip address on the other server. Unfortunately when I try to use the network ip address as opposed to localhost the connection doesn't seem to work from the host server. Any insight on whether my suspicions are correct would be appreciated.

  Read the article

• State management using the Application class in ASP.Net applications

  - by nikolaosk

  I have explained some of the state mechanisms that we have in our disposal for preserving state in ASP.Net applications in various posts in this blog. You can have a look at this post , this post , this post and this one . I have not presented yet an example in using the Application class/object for preserving state within our application. Application state is available globally in an application.The way we access Application State is through the HttpApplication object's Application property. Let...(read more)

  Read the article

• Create folder and insert file in Google Drive

  - by web_student

  I am trying to create a new folder in Drive and upload one (or more) files to that created folder. I use the code below, but the result is that both the folder and the file are placed in the root of my Drive. $client->setAccessToken($_SESSION['accessToken']); //create folder $folder_mime = "application/vnd.google-apps.folder"; $folder_name = 'New Folder'; $service = new Google_DriveService($client); $folder = new Google_DriveFile(); $folder->setTitle($folder_name); $folder->setMimeType($folder_mime); $service->files->insert($folder); //upload file $file_name = $_FILES["uploadFile"]["name"]; $file_mime = $_FILES["uploadFile"]["type"]; $file_path = $_FILES["uploadFile"]["tmp_name"]; $service = new Google_DriveService($client); $file = new Google_DriveFile(); $file->setParents(array($folder_name)); $file->setTitle($file_name); $file->setDescription('This is a '.$file_mime.' document'); $file->setMimeType($file_mime); $service->files->insert( $file, array( 'data' => file_get_contents($file_path) ) );

  Read the article

• Everything on hard drive suddenly vanished without explanation, but the drive seems otherwise functional

  - by user160705

  Windows 7 Ultimate x64 Custom-built desktop I have a new desktop that I built a few months ago that has a four-year-old WD hard drive and a two-year-old drive. I had set it up so that the newer drive had Windows and most of my files on it while the older drive had my music library, some movies and games, and a backup of all of my documents. About a month ago, I installed some new case fans and, in the process, I temporarily unplugged my hard drive (while the computer was off of course - I took all the necessary precautions) for wire management. I plugged it back in, and didn't really think anything of it. At around that time, however, I noticed that my older hard drive wasn't showing up in Windows Explorer anymore but I didn't really have time to check into it (I had just started college) and I'm finally getting a chance to now. That drive doesn't show up in Windows Explorer at all but it does show up in Disk Management. That screen shows the following: http://puu.sh/17mMN Any idea what happened? Is there any way to recover my files? Thanks in advance for your help! EDIT: The music and games and stuff used to be on "Disc 1", the 465.71 GB of what is now showing as unallocated space.

  Read the article

• State pattern: Why doesn't the context class implement or inherit the State abstract interface/class

  - by Ricket

  I'm reading about the State pattern. I have only just begun, so of course I begin by reading the entire Wikipedia article on it. I noticed that both of the examples in the article have some base abstract class or Java interface for a generic State's methods/functions. Then there are some states which inherit from the base and implement those methods/functions in different ways. Then there's a Context class which has a private member of type State and which, at any time, can be equal to an instance of one of the implementations. That context class also implements the same methods, and passes them onto the current state instance, and then has an additional method to change the state (or depending on design I understand the change of state could be a reaction to one of the implemented methods). Why doesn't this context class specifically "extend" or "implement" the generic State base class/interface?

  Read the article

• Using both IIS6 and IIS7 with the same SQL State Server

  - by Josef

  We are trying to use new IIS7 (32bit, Classic Mode) webs in addition to our IIS6 webs with one SQL State Server for ASP.NET Session Handling. Unfortunately the number of transactions per seconds in the State Servers spikes (10 times+) as soon as we add the new IIS7 web to the farm. Are there any known issues with the described setup?

  Read the article

• Will Windows fail activation on a new hard drive after previous hard drive failed

  - by ServerBloke

  I have a failing hard drive which won't boot, that has Windows 7 Home Premium installed. I have a replacement hard drive on the way. My question is will I run into problems trying to install Windows 7 using the same cdkey and DVD on the new hard drive? I assume activation will find that the cdkey has already been activated and fail, especially if a hardware ID is checked which will probably be different because even though the other hardware is the same, the hard drive will be different.

  Read the article

• External hard drive issue

  - by Blind Fish

  I am running Ubuntu 12.04 and I have a 500GB external hard drive, formatted in ext4, which I have used for about a year to store batches of data that I am sifting through. About once a week I move a chunk of data from the external drive to my internal drive for processing. As I do that I delete the data from the external drive and empty the trash, thereby clearing up space on the external and also preventing myself from grabbing stuff that I've already sorted through. The vast majority of this is text files, but there are a few .jpegs and .mp4s thrown in, if that matters. Anyway, this has been working without a hitch for nearly a year. So today I plug in the drive and I have an odd issue. I was able to move folders from the external over to my internal drive with no problem, but when I tried to delete those files I was unable to do so. I kept getting the "unable to send file to trash, do you wish to delete permanently?" message. I clicked yes / delete all, but no files were actually deleted. It just sat there. Even worse, while the system was trying in vain to delete those files I was unable to move more files over. In short, I was stuck. I canceled the operation, unmounted and remounted the drive, and then I had an even bigger problem. I have a spreadsheet of all the different folders on there ( exactly 818 ) and yet when I opened the drive in Nautilus, it was only finding 512 folders. So I had 306 missing folders, but my free space was unchanged. Immediately I think that the drive may be corrupted. I went into Disk Utility and ran the check disk option. It said that the drive was NOT clean, but offered no remedy or option to repair. I went back into the drive in Nautilus and once again attempted to delete the files I had already moved. Same issue. I clicked on Details and it said that it was unable to create a trashing file I/O error. I've looked, and it's not a permissions issue. The drive and all folders that are in it all belong to me, and they are all read / write. I've started running badblocks on the drive, but it looks like that is going to take several hours to complete. Any ideas?

  Read the article

• border:2px solid red VS border:2px red solid

  - by metal-gear-solid

  Are both method valid? both works same. border:2px solid red; and border:2px red solid;

  Read the article

• Hard Drive missing drive space

  - by Chance Robertson

  I have a 500 GB hard drive which I previously attached to my Mac. I detached the drive without going through the eject procedure. When I did this a message showed up, which of course I did not read. I could not use the drive until I formatted again. Now, when I attach the drive it says it is formatted NTFS and has 280.39 of 500 GB free. When I open the drive in Windows Explorer, Finder, or in Linux, is only shows a handful of files totaling 54 MB. How can I find out what is taking up all the space.

  Read the article

• In a state machine, is it a good idea to separate states and transitions?

  - by codablank1

  I have implemented a small state machine in this way (in pseudo code): class Input {} class KeyInput inherits Input { public : enum { Key_A, Key_B, ..., } } class GUIInput inherits Input { public : enum { Button_A, Button_B, ..., } } enum Event { NewGame, Quit, OpenOptions, OpenMenu } class BaseState { String name; Event get_event (Input input); void handle (Event e); //event handling function } class Menu inherits BaseState{...} class InGame inherits BaseState{...} class Options inherits BaseState{...} class StateMachine { public : BaseState get_current_state () { return current_state; } void add_state (String name, BaseState state) { statesMap.insert(name, state);} //raise an exception if state not found BaseState get_state (String name) { return statesMap.find(name); } //raise an exception if state or next_state not found void add_transition (Event event, String state_name, String next_state_name) { BaseState state = get_state(state_name); BaseState next_state = get_state(next_state_name); transitionsMap.insert(pair<event, state>, next_state); } //raise exception if couple not found BaseState get_next_state(Event event, BaseState state) { return transitionsMap.find(pair<event, state>); } void handle(Input input) { Event event = current_state.get_event(input) current_state.handle(event); current_state = get_next_state(event, current_state); } private : BaseState current_state; map<String, BaseState> statesMap; //map of all states in the machine //for each couple event/state, this map stores the next state map<pair<Event, BaseState>, BaseState> transitionsMap; } So, before getting the transition, I need to convert the key input or GUI input to the proper event, given the current state; thus the same key 'W' can launch a new game in the 'Menu' state or moving forward a character in the 'InGame' state; Then I get the next state from the transitionsMap and I update the current state Does this configuration seem valid to you ? Is it a good idea to separate states and transitions ? And I have some kind of trouble to represent a 'null state' or a 'null event'; What initial value can I give to the current state and which one should be returned by get_state if it fails ?

  Read the article

• iptables rules keep showing up

  - by Omriko

  I just installed an ubuntu precise server, after a few weird communications issues I checked the iptables list and found: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- 10.0.0.0/24 anywhere tcp spts:1024:65535 dpt:ssh state NEW ACCEPT icmp -- anywhere anywhere state NEW ACCEPT icmp -- anywhere anywhere state NEW ACCEPT icmp -- anywhere anywhere state NEW ACCEPT icmp -- anywhere anywhere state NEW DROP tcp -- anywhere anywhere tcp dpt:10520 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:31337 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:31338 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:54320 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:54321 state NEW DROP tcp -- anywhere anywhere tcp dpt:12345 state NEW DROP tcp -- anywhere anywhere tcp dpt:12346 state NEW DROP tcp -- anywhere anywhere tcp dpt:20034 state NEW DROP tcp -- anywhere anywhere tcp dpt:16600 state NEW DROP tcp -- anywhere anywhere tcp dpt:16660 state NEW DROP tcp -- anywhere anywhere tcp dpt:65000 state NEW DROP udp -- anywhere anywhere udp dpt:34555 state NEW DROP udp -- anywhere anywhere udp dpt:35555 state NEW DROP udp -- anywhere anywhere udp spts:netbios-ns:netbios-dgm dpts:netbios-ns:netbios-dgm state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpt:netbios-ssn state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpt:microsoft-ds state NEW DROP udp -- anywhere anywhere udp spt:microsoft-ds dpt:microsoft-ds state NEW DROP udp -- anywhere anywhere udp spts:1024:65535 dpt:microsoft-ds state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpt:loc-srv state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpt:5000 state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpts:1025:1029 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:loc-srv state NEW ACCEPT tcp -- anywhere anywhere tcp spts:1024:65535 dpt:28082 state NEW DROP all -- anywhere anywhere state NEW Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp spts:tcpmux:65535 dpts:tcpmux:65535 state NEW ACCEPT udp -- anywhere anywhere udp dpts:1:65535 state NEW ACCEPT icmp -- anywhere anywhere state NEW ACCEPT tcp -- anywhere anywhere tcp spts:1024:65535 dpt:28082 state NEW DROP all -- anywhere anywhere state NEW I tried to wipe the rules, I disabled UFW, Ive rewritten and saved iptables rules according to this guide, but every minute or so the old rules return.... I checked crontab for scheduled tasks, there is nothing in there but still these rules appear every minute... please help!

  Read the article

• Designing a state machine in C++

  - by skyeagle

  I have a little problem that involves modelling a state machine. I have managed to do a little bit of knowledge engineering and 'reverse engineer' a set of primitive deterministic rules that determine state as well as state transitions. I would like to know what the best practises are regarding: How to rigorously test my states and state transitions to make sure that the system cannot end up in an undeetermined state. How to enforce state transition requirements (for example, it should be impossible to go directly from stateFoo to StateFooBar, i.e. to embue each state with 'knowlege' about the states it can transition to. Ideally, I would like to use clean, pattern based design, with templates wherever possible. I do need somewhere to start though and I would be grateful for any pointers (no pun intended), that are sent my way.

  Read the article

• How to enable Google Drive offline access

  - by Gopinath

  Google’s latest cloud offering Google Drive provides 5GB of free storage to let you store documents, spread sheets, photos and other stuff and access them using a variety of devices – PCs, Macs, smartphones and tablets. You can also set up offline access to Google Drive so that you can access files on the move even if you don’t have access to internet connection. To access Google Drive offline you need Chrome browser and here are the simple steps to be followed for setting up. Step 1:  Login to Google Drive and click the gear icon in the upper right of your window. Step 2: Select Set up Docs offline from the drop-down menu. The “Set up offline viewing of Google Docs” dialog will appear Step 3:  Authorize Google Chrome to store your Google Drive content by clicking on “Allow offline docs” and then install “Docs Chrome web app” by clicking on “Install from Chrome web store”. You’ll be taken to the Chrome web store, where you’ll need to click Install on the right-hand side of the browser window. Step 4: Once the app is installed, you’ll be taken to a Chrome page with the Google Docs app icon. Click the icon to go back to your Documents List. Google Chrome take few minutes to prepare Google Drive for offline access by downloading all the files to your local computer. Once it’s completed, you can access Google Drive files offline. To access files of Google Drive offline point your Chrome browser to drive.google.com. When offline your Google Docs stored on Google Drive are available in view only mode. You can open Google Documents, Spread sheets & Presentations and see the content but you can’t edit them.

  Read the article

• External hard drive doesn't appear in Computer

  - by Thomas Clayson

  I cannot work out why this is happening. I have an external hard drive (which is an old laptop hard drive with an IDE to USB adapter). Plugging it into my computer powers it up. It spins correctly and the lights on the adapter flash normally. Uninstalling from hardware manager and plugging it back in causes Windows to "install new software", and it says it has installed properly. In Disk Management it comes up in the bottom part as Disk 2 with the right size (~60 GB), but not in the top half. There are three empty drives in the top half. They don't have titles or drive letters. Right clicking them bring up slightly varying context menus, but all with the options disabled. Here is a picture of my Disk Management screen: How do I make this drive show up in My Computer? I need to format it and use it as an external hard drive.

  Read the article

• Is computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more. Won't 2GB or 4GB be quite good if a Solid State Hard drive is used? I think the most worried thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with SDD drive, the problem is a lot less of a concerned? Is there a comparison as to, if DRAM speed is n, then SDD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• Windows 7 keeps losing drive letters

  - by Dean Perry

  Windows 7 loses its drive letters and I have to keep manually assigning a drive letter everytime I plug in a hard drive, whether it's internal or external. The only way to get around it is to reinstall Windows 7 but the problem will come back after a few months. We are a PC repair company and plug in many drives during the say and it can be very frustrating having to keep assigning a drive letter every time a drive is plugged in. Windows Updates are turned off so it can't be that. Any reason why this would have happened?

  Read the article

• Drive stopped working on windows server 2003 and I receive a "controller error"

  - by Durden81

  I can access the server in safe mode. I have a Proliant 360 Hp server with Windows server 2003 R2. The event viewer is completely filled up with this error: the driver detected a controller error on Device\Harddisk3\DR3 I individuated the drive affected. It is drive H that is a secondary non mirrored drive. When I access anything on that drive I receive: "the request could not be performed because of an I/O device error" What should I do? Is this just a driver issue or a hard drive failure? Please give me a quick help as my websites are offline due to this. Any suggestion is welcome!

  Read the article

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

• Communication between state machines with hidden transitions

  - by slartibartfast

  The question emerged for me in embedded programming but I think it can be applied to quite a number of general networking situations e.g. when a communication partner fails. Assume we have an application logic (a program) running on a computer and a gadget connected to that computer via e.g. a serial interface like RS232. The gadget has a red/green/blue LED and a button which disables the LED. The LEDs color can be driven by software commands over the serial interface and the state (red/green/blue/off) is read back and causes a reaction in the application logic. Asynchronous behaviour of the application logic with regard to the LED color down to a certain delay (depending on the execution cycle of the application) is tolerated. What we essentially have is a resource (the LED) which can not be reserved and handled atomically by software because the (organic) user can at any time press the button to interfere/break the software attempt to switch the LED color. Stripping this example from its physical outfit I dare to say that we have two communicating state machines A (application logic) and G (gadget) where G executes state changes unbeknownst to A (and also the other way round, but this is not significant in our example) and only A can be modified at a reasonable price. A needs to see the reaction and state of G in one piece of information which may be (slightly) outdated but not inconsistent with respect to the short time window when this information was generated on the side of G. What I am looking for is a concise method to handle such a situation in embedded software (i.e. no layer/framework like CORBA etc. available). A programming technique which is able to map the complete behaviour of both participants on classical interfaces of a classical programming language (C in this case). To complicate matters (or rather, to generalize), a simple high frequency communication cycle of A to G and back (IOW: A is rapidly polling G) is out of focus because of technical restrictions (delay of serial com, A not always active, etc.). What I currently see as a general solution is: the application logic A as one thread of execution an adapter object (proxy) PG (presenting G inside the computer), together with the serial driver as another thread a communication object between the two (A and PG) which is transactionally safe to exchange The two execution contexts (threads) on the computer may be multi-core or just interrupt driven or tasks in an RTOS. The com object contains the following data: suspected state (written by A): effectively a member of the power set of states in G (in our case: red, green, blue, off, red_or_green, red_or_blue, red_or_off...etc.) command data (written by A): test_if_off, switch_to_red, switch_to_green, switch_to_blue operation status (written by PG): operation_pending, success, wrong_state, link_broken new state (written by PG): red, green, blue, off The idea of the com object is that A writes whichever (set of) state it thinks G is in, together with a command. (Example: suspected state="red_or_green", command: "switch_to_blue") Notice that the commands issued by A will not work if the user has switched off the LED and A needs to know this. PG will pick up such a com object and try to send the command to G, receive its answer (or a timeout) and set the operation status and new state accordingly. A will take back the oject once it is no longer at operation_pending and can react to the outcome. The com object could be separated of course (into two objects, one for each direction) but I think it is convenient in nearly all instances to have the command close to the result. I would like to have major flaws pointed out or hear an entirely different view on such a situation.

  Read the article

• Flash drive suddenly died. Why? Can I recover it?

  - by mg

  Hi, I have a flash drive that I used not too much but, after few month of inactivity, it died. I know that flash drives have a limited write cycles but I am sure that this is not the problem. I tried to create a new partition table and format the drive nothing worked. This is the output of mkfs.ext2. marco@pinguina:~$ sudo LANG=en.UTF-8 mkfs.ext2 -v -c /dev/sdc1 [sudo] password for marco: mke2fs 1.41.11 (14-Mar-2010) fs_types for mke2fs.conf resolution: 'ext2', 'default' Calling BLKDISCARD from 0 to 4001431552 failed. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 244320 inodes, 976912 blocks 48845 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=1002438656 30 block groups 32768 blocks per group, 32768 fragments per group 8144 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Running command: badblocks -b 4096 -X -s /dev/sdc1 976911 badblocks: Input/output error during ext2fs_sync_device Checking for bad blocks (read-only test): done Block 0 in primary superblock/group descriptor area bad. Blocks 0 through 2 must be good in order to build a filesystem. Aborting.... Is there something I can do to recover it?

  Read the article

• Sending state diffs (deltas) and unreliable connections

  - by spaceOwl

  We're building a realtime multiplayer game, in which each player is responsible for reporting its state on every iteration of the game loop. The state updates are broadcasted using unreliable UDP. To minimize state data sending, we've come up with a system that will send only deltas (whatever state data that was changed). This method however is flawed, since a lost packet will mean that other players will not receive the delta, making the game behave in an unexpected way. For example: Assume that state is comprised of: { positionX, positionY, health } Frame 1 - positionX changed --> send a packet with positionX only. Frame 2 - health changed // lost ! Frame 3 - positionY changed --> send a packet with positionY only. // Other players don't know about health change. How can one overcome this issue then? sending the entire data is not always feasible.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >