Search Results

Search found 1096 results on 44 pages for '0000'.

Page 20/44 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • CentOS networking BNX2

    - by james moore
    Having some trouble with my NICs. The server starts fine and I can wget/ping etc. However, when I /etc/init.d/networking restart I then receive the following error: Bringing up interface eth0: bnx2: fw sync timeout, reset code = 1030009 SIOCSIFFLAGS: Device or resource busy Consequently, the task fails. I have searched around on google users suggesting to disable PNP in the BIOS but I see no option. Here is some system information: $ ethtool -i eth0 driver: bnx2 version: 2.0.8-rh firmware-version: bc 2.9.1 $ uname -a Linux host 2.6.18-238.9.1.el5 #1 SMP Tue Apr 12 18:10:13 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux $/sbin/lspci | grep Broadcom 04:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) 08:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) $ lsmod | grep bnx2 bnx2i 81704 0 cnic 109512 1 bnx2i libiscsi2 77765 6 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi_tcp scsi_transport_iscsi2 73945 8 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2 bnx2 224780 0 scsi_mod 199001 15 mpt2sas,scsi_transport_sas,mptctl,be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2,scsi_transport_iscsi2,scsi_dh,sg,libata,megaraid_sas,sd_mod $ rmmod bnx2; modprobe bnx2 PCI: Enabling device 0000:05:00.0 (0158 -> 015a) PCI: Enabling device 0000:09:00.0 (0158 -> 015a) bnx2: fw sync timeout, reset code = 10300003 Any help would be appreciated as I am at a loss.

    Read the article

  • Spammer relaying via Postfix mail server

    - by Paddington
    I have a Plesk 9.5 mail server (cm.snowbarre.co.za) on Ubuntu 8.04 LTS which forwards all SMTP traffic to an anti-spam server cacti.snowbarre.co.za. Many times I see the headers on the anti-spam server to contain from addresses not hosted on the mail server and I have checked and confirmed that my server is not an open relay server. How can a spammer be using my server to relay spam traffic? How can I stop this? Open relay test: paddington@paddington-MS-7387:~$ telnet cm 25 Trying 196.201.x.x... Connected to cm. Escape character is '^]'. 220 cm.snowbarre.co.za ESMTP Postfix (Ubuntu) mail from:[email protected] 250 2.1.0 Ok rcpt:[email protected] 221 2.7.0 Error: I can break rules, too. Goodbye. Connection closed by foreign host. paddington@paddington-MS-7387:~$ A typical headers is: *Received from cm.snowbarre.co.za (cm.snowbarre.co.za[196.201.x.x]) by cacti.snowbarre.co.za (Postfix) with ESMTPS id 00B601881AD; Mon, 27 Aug 2012 14:03:29 +0200 (SAST) Received from cm.snowbarre.co.za (localhost [127.0.0.1]) by cm.snowbarre.co.za (Postfix) with ESMTP id 81627367E007; Mon, 27 Aug 2012 14:02:50 +0200 (SAST) Received from User (ml82.128.x.x.multilinksg.com [82.128.x.x]) by cm.snowbarre.co.za (Postfix) with ESMTP; Mon, 27 Aug 2012 14:02:49 +0200 (SAST) Reply-To <[email protected]> From "Ms Nkeuri Aguiyi"<[email protected]> Subject Your Unpaid Fund. Date Mon, 27 Aug 2012 05:03:22 -0700 MIME-Version 1.0 Content-Type text/html; charset="Windows-1251" Content-Transfer-Encoding 7bit X-Priority 3 X-MSMail-Priority Normal X-Mailer Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE Produced By Microsoft MimeOLE V6.00.2600.0000 X-Antivirus avast! (VPS 120821-0, 08/21/2012), Outbound message X-Antivirus-Status Clean Message-Id <[email protected]> To undisclosed-recipients:;*

    Read the article

  • Reducing video mode switching during Linux boot

    - by Zack
    When I boot up my desktop computer, which only has Linux on it, the video mode and/or console font gets switched four times: When GRUB starts, it switches from 80x25 text to a graphical mode so it can draw a pretty background behind its menu; GRUB then goes back to 80x25 text after I pick something from the menu; When the KMS driver for my video card loads, it switches to a much higher-resolution text mode (I don't know if this is a hardware text mode or not); Finally X starts and it goes graphics and stays that way. I think this last switch does not change the resolution of the video mode, only the graphicalness. I'd like to get rid of as many of these mode switches as possible. Ideally, when GRUB takes over from the BIOS it would go directly to the same high-resolution text mode that the KMS driver selects, and the display would stay in that mode till X starts and brings up graphics. I am under the impression that this is possible by mucking with the kernel command line and/or the GRUB console module load parameters, but I don't know the details. GRUB 1.98+20100706, kernel 2.6.32.15 using Nouveau video drivers. Distro is Debian unstable. Please no answers that involve recompiling anything or cobbling together bleeding-edge kernel/driver combinations, I don't care enough about this to go to that much trouble. EDIT: Tobu suggests setting GRUB_GFXMODE to the full pixel resolution of the monitor, and GRUB_GFXPAYLOAD_LINUX=keep to avoid the mode switch after the menu goes away. This does part of what I want, but winds up being worse overall. There's no mode switch after the menu, but there's still a painfully-slow screen repaint (I should probably just give up on GRUB's gfxmode, it's waaaay too slow at 1920x1200). More seriously, there's now a double mode switch when nouveaufb loads, along with fun-looking error messages in dmesg [ 5.923798] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ba5f4600 [ 5.923802] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 5.923821] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 1 ("PFIFO_INTR" message repeats 400+ times) [ 5.925609] Console: switching to colour dummy device 80x25 [ 5.925802] Console: switching to colour frame buffer device 240x75

    Read the article

  • Can Xen be configured to dedicate only one port of a dual-port NIC to a domU?

    - by jamieb
    I'm using CentOS 5.4 on my dom0 with a stock Xen kernel. I'm attempting to use the pciback module to hide some of the Ethernet ports from the host and reserve them for a domU I intend to use for a firewall (process described here). However, when I launch the domU, I get the following error message: Using config file "/etc/xen/firewall". Error: pci: improper device assignment specified: pci: 0000:01:04.0 must be co-assigned to the same guest with 0000:01:06.0, but it is not owned by pciback. lspci gives me the following output: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) From the sound of the error message, it seems like I also need to dedicate eth0 (PCI ID 01:04.0) to the domU. Am I correct? If not, what am I doing wrong? Thanks!

    Read the article

  • Export-Mailbox Error

    - by tuck918
    All, I am using export-mailbox to move some data and it is working fine until I get this error: StatusMessage : Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000 This is the command I am using: export-mailbox -identity mailboxA -targetmailbox mailboxB -targetfolder folderA -allowmerge We are on SP2 and I am running this under an account that is not a domain or enterprise admin. THe account has Exchange Server Administrator Permission Both Source and Target Exchange Mailbox Server. THe account is part of the Local Administrators Group Member Both Source and Target Exchange Mailbox Server. This account has Full Access permission on both the target and source servers. THe issue happens at any time and I am only trying to run this on one mailbox, the only mailbox I need to run it on. THe event log is "Error Exchange Migration Export Mailbox Event 1008". The log under migration logs just shows that it was running okay then it gives the same error as above "Error was found for mailboxA ([email protected]) because: Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000, error code: -1056749164" Any ideas on what to do/try?

    Read the article

  • Domain workstation acting up and I can't track it down.

    - by DevNULL
    I have a developer with a Windows XP (SP2) 64 bit machine. If the machine is left on overnight (or any period of time longer than 5-6 hours) it takes 2-3 minutes to open any local drive and his network drives are no longer accessible. Here's what the system logs report... Any Help BTW: The problem just started a week ago and nothing has changed on the domain controller / AD or his machine. --- ERROR 1 Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 5719 Date: 6/8/2010 Time: 9:17:26 AM User: N/A Computer: BFC1 Description: This computer was not able to set up a secure session with a domain controller in domain UR due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. ADDITIONAL INFO If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5e 00 00 c0 ^..A --- ERROR 2 The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID {555F3418-D99E-4E51-800A-6E89CFD8B1D7} to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19). This security permission can be modified using the Component Services administrative tool. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. --- ERROR 3 Event Type: Error Event Source: RemoteAccess Event Category: None Event ID: 20106 Date: 6/8/2010 Time: 10:12:18 AM User: N/A Computer: BFC1 Description: Unable to add the interface {E76F0A78-7A0B-4EBB-A081-BA3BD452FC4C} with the Router Manager for the IP protocol. The following error occurred: Cannot complete this function. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: eb 03 00 00 e...

    Read the article

  • Controller Error: Do I need to worry?

    - by Kryten
    I have a HP Pavillion dv5224ea Laptop with Windows 7 on it. Recently I discovered a Error in Event Viewer: The driver detected a controller error on \Device\Ide\IdePort1. (more details): - System - Provider [ Name] atapi - EventID 11 [ Qualifiers] 49156 Level 2 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2010-03-07T12:43:07.090197600Z EventRecordID 30198 Channel System Computer Alistair-Win7 Security - EventData \Device\Ide\IdePort1 0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00100000 00000001 00000000 C004000B 0008: 00000002 C0000185 00000000 00000000 0010: 00000000 00000000 00000000 00000000 0018: 00000000 00001004 In Bytes 0000: 00 00 10 00 01 00 00 00 ........ 0008: 00 00 00 00 0B 00 04 C0 .......À 0010: 02 00 00 00 85 01 00 C0 ......À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 00 00 00 00 04 10 00 00 ........ Event Viewer is recording A LOT of these errors (sometimes 13, one after the other!). Do I need to worry? What does this error mean? What device could "\Device\Ide\IdePort1" be? What is a ATAPI Error? Do I need to re-install Windows? I generally find the occurs when I try to backup my machine (using Windows Backup) or when using a program that uses Volume Shadow Copy. I have run "sfc", no problems. There are no Device Errors in Device Manager. I have also run "vssadmin list writers", no problems. Whats going on??? Would it be a good idea to re-install Windows 7?

    Read the article

  • Bacula virtual backup job doesn't run, no output?

    - by Zoredache
    I am trying to get Virtual Backups working, but when I try to run a virtual backup job, it appears to get created, but then never seems to actually run. I have a full, and a couple incremental backups. status director JobId Level Files Bytes Status Finished Name ==================================================================== 1283 Full 10,565 1.963 G OK 21-Dec-12 09:47 nms-Job 1284 Incr 314 129.6 M OK 21-Dec-12 09:49 nms-Job 1285 Incr 230 147.2 M OK 21-Dec-12 09:51 nms-Job 1288 Incr 525 138.8 M OK 21-Dec-12 11:25 nms-Job I attempt to start a job from bconsole like this. *run job=nms-Job level=VirtualFull Using Catalog "MySQL" Run Backup job JobName: nms-Job Level: VirtualFull Client: nms-FileDaemon FileSet: nms-FileSet Pool: nms-pool (From Job resource) Storage: File_d1 (From Pool resource) When: 2012-12-21 13:07:54 Priority: 10 OK to run? (yes/mod/no): Job queued. JobId=1291 Then my new job, just sits there, doing nothing. The JobStatus shows that the job was created, but it appears to never run? All the full, and incremental backups are terminating normally. *llist jobid=1291 JobId: 1,291 Job: nms-Job.2012-12-21_13.07.56_07 Name: nms-Job PurgedFiles: 0 Type: B Level: F ClientId: 4 Name: nms-FileDaemon JobStatus: C SchedTime: 2012-12-21 13:07:54 StartTime: 2012-12-21 13:07:56 EndTime: 0000-00-00 00:00:00 RealEndTime: 0000-00-00 00:00:00 JobTDate: 1,356,124,076 VolSessionId: 0 VolSessionTime: 0 JobFiles: 0 JobErrors: 0 JobMissingFiles: 0 PoolId: 19 PooLname: nms-pool PriorJobId: 0 FileSetId: 11 FileSet: nms-FileSet I am getting very frustrated, that this isn't working, mostly because it isn't giving me any error logs, or output at all. I submit the job, and as far as I can tell nothing happens. Is there some status, or debugging level that I can set to get a useful information about why this isn't working? What can I do to make this work? I was originally running Bacula 5.0.2 on Debian Squeeze, out of frustration, I upgraded to the 5.2.6 in the backports repository, hoping that a new version might give me better results.

    Read the article

  • Synergy: Cannot send media keys from Linux to Mac

    - by CraftyThumber
    I have a Linux Synergy server (Si-Linux) serving just one Mac client (Macbook Pro UK) (SiBook-Pro.local). On my Linux server I am using a USB Apple keyboard with the exact layout of the laptops keyboard (the compact UK aluminium keyboard). I would like to send the media keys to the Mac client at all times and I have attempted the following in my synergy.conf: keystroke(AudioPlay) = keystroke(AudioPlay,SiBook-Pro.local) This did not seem to work so I ran both the server and client as foreground processes and with debugging enabled and observed the following: Server Log: DEBUG1: activate actions DEBUG1: hotkey: keyDown(AudioPlay,SiBook-Pro.local) DEBUG1: onKeyDown id=57523 mask=0x0000 button=0x0000 DEBUG1: send key down to "SiBook-Pro.local" id=57523, mask=0x0000, button=0x0000 DEBUG1: deactivate actions DEBUG1: hotkey: keyUp(AudioPlay,SiBook-Pro.local) DEBUG1: onKeyUp id=57523 mask=0x0000 button=0x0000 DEBUG1: send key up to "SiBook-Pro.local" id=57523, mask=0x0000, button=0x0000 Client Log: DEBUG1: recv key down id=0x0000e0b3, mask=0x0000, button=0x0000 DEBUG1: mapKey e0b3 (57523) with mask 0000, start state: 0000 DEBUG1: key e0b3 is not on keyboard DEBUG1: recv key up id=0x0000e0b3, mask=0x0000, button=0x0000 DEBUG1: recv enter, 1279,386 5 2000 As you can see, the client claims the key received is not on keyboard. I don't understand since it is the same key as is on the Macbook's keyboard. I tried to reverse the client-server config to see if I could capture the key being sent if I pressed the Play button on the Macbook but the key doesn't seem to even make it to Synergy. Almost all keyboard presses get logged but the media keys seem to bypass the logs and just execute their function locally. E.g. I press play on the Macbook (with the Macbook as the server) and the key plays music on the Macbook and the key is not logged to the debug log.

    Read the article

  • High fan speed with no reason

    - by Klaus
    For a few weeks, the fans of my Lenovo B590 laptop, running on Xubuntu 14, turn to high speed a few minutes after it is turned on. The fans won't speed down until I turn the computer off. This is quite strange, since This didn't happen before The temperatures are quite low (are they ?) $sensors Adapter: Virtual device temp1: +36.0°C (crit = +88.0°C) temp2: +30.0°C (crit = +126.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +37.0°C (high = +72.0°C, crit = +90.0°C) Core 0: +34.0°C (high = +72.0°C, crit = +90.0°C) Core 1: +31.0°C (high = +72.0°C, crit = +90.0°C) thinkpad-isa-0000 Adapter: ISA adapter fan1: 0 RPM pkg-temp-0-virtual-0 Adapter: Virtual device temp1: +37.0°C $sudo hddtemp /dev/sda /dev/sda: ST500LT012-9WS142: 33°C The computer is under low load: top - 08:30:15 up 16 min, 2 users, load average: 0.28, 0.23, 0.23 Tasks: 197 total, 1 running, 196 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.8 us, 0.5 sy, 0.0 ni, 98.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 3607944 total, 1973956 used, 1633988 free, 99660 buffers KiB Swap: 3744764 total, 0 used, 3744764 free. 789936 cached Mem The BIOS is up to date (and there are no fan settings in it) The fan is clean and dust-free Why would the BIOS turn the fans to high speed where there seem to be no reason for that ? It seems that we cannot control the fan manually with this model, so I guess the only solution is to understand why this happens.

    Read the article

  • Ubuntu 10.04 network manager issues

    - by Shark
    I was using the default network manager to connect to my wi-fi network, but if the connection is dropped or router restarted the network manager wont reconnect automatically after i guess a couple of tries and just gives a pop-up to connect manually . To avoid this annoyance I installed WICD but though it does try to reconnect to the network after a drop in connection it is unable to resolve the ip address and i am left with an even bigger annoyance . 1. Is there a way to counter either of these issues ? 2. Something like a background process that will check network status periodically and then try to connect to a favored network ? Edit- out put of lshw -C network *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:18:9b:7f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=192.168.11.2 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbc00000-fbc03fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 02 serial: f0:4d:a2:94:2d:74 size: 10MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:29 ioport:e000(size=256) memory:d0b10000-d0b10fff(prefetchable) memory:d0b00000-d0b0ffff(prefetchable) memory:fb200000-fb21ffff(prefetchable)

    Read the article

  • Ngix rewrite is not working as expected

    - by SamFisher83
    I am trying to learn how to use nginx and how to use its rewrite functionality Nginx seems to be doing the rewrite: 2012/03/27 16:30:26 [notice] 16216#0: *3 "foo.php" matches "/foo.php", client: 61.90.22.223, server: localhost, request: "GET /foo.php HTTP/1.1", host: "domain.com" 2012/03/27 16:30:26 [notice] 16216#0: *3 rewritten data: "img.php", args: "", client: 61.90.22.223, server: localhost, request: "GET /foo.php HTTP/1.1", host: "domain.com" but in my access log I am getting the following: 61.90.22.223 - - [27/Mar/2012:16:26:54 +0000] "GET /foo.php HTTP/1.1" 404 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:11.0) Gecko/20100101 Firefox/11.0" 61.90.22.223 - - [27/Mar/2012:16:30:26 +0000] "GET /foo.php HTTP/1.1" 404 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:11.0) Gecko/20100101 Firefox/11.0" There is an img.php in the root directory so I am not sure why I am getting a 404 error Here is part of the configuration block: rewrite foo.php img.php last; location / { try_files $uri $uri/ /index.html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; }

    Read the article

  • Get Matrox Millenium video card working in Ubuntu 9.10

    - by wcoenen
    I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

    Read the article

  • Explorer constantly hanging

    - by user978122
    So I'm running Windows 7 Ultimate (x64) an AMD 8150 on an Asus Crosshair V motherboard with all the latest and greatest patches, and I am experiencing frequent Explorer freezes. I've included the information I've grepped from the Event Viewer below: The program Explorer.EXE version 6.1.7601.17567 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel. Process ID: 13a4 Start Time: 01cdb2968999c6fd Termination Time: 0 Application Path: C:\Windows\Explorer.EXE Report Id: c000ba44-1e8b-11e2-9ae7-000272ddf2b0 - System - Provider [ Name] Application Hang - EventID 1002 [ Qualifiers] 0 Level 2 Task 101 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2012-10-25T10:08:44.000000000Z EventRecordID 14626 Channel Application Computer RyanMain-PC Security - EventData Explorer.EXE 6.1.7601.17567 13a4 01cdb2968999c6fd 0 C:\Windows\Explorer.EXE c000ba44-1e8b-11e2-9ae7-000272ddf2b0 430072006F00730073002D0074006800720065006100640000000000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00720043 0073006F 002D0073 00680074 0008: 00650072 00640061 00000000 In Bytes 0000: 43 00 72 00 6F 00 73 00 C.r.o.s. 0008: 73 00 2D 00 74 00 68 00 s.-.t.h. 0010: 72 00 65 00 61 00 64 00 r.e.a.d. 0018: 00 00 00 00 .... Any idea what "Cross-thread" here means?

    Read the article

  • Can't connect to wi-fi hotspot in Ubuntu 11.10

    - by ht3t
    I'm new to Ubuntu. I'm having a wireless network problem in Ubuntu 11.10. I made a hotspot using Connectify from a computer which is running Windows 7. I can access it in Windows 7 but not in Ubuntu 11.10. Every time I access it,I get a message "disconnected". I'm using msi fx 400 notebook with Intel Centrino wireless -N 1000 wireless card. Ubuntu version is 11.10 with KDE desktop. $ sudo lshw -c network [sudo] password for ht3t: *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:56:b8:f0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:44 memory:e7400000-e7401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 40:61:86:b6:b1:a2 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw IP=192.168.21.107 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:9000(size=256) memory:e6004000-e6004fff memory:e6000000-e6003fff I can't do anything without internet connection. How can I fix this?

    Read the article

  • What software this log file comes from? [closed]

    - by mickula
    From what software comes this logfile? Please specify full name. Internal IP Threshold FlowsDiff 40 flows/s, Diff: 73 flows/s Sum 26.962 flows/300s (89 flows/s), 32.162.000 packets/300s (107.206 packets/s), 1,198 GByte/300s (32 MBit/s) External 87.98.238.221, 26.958 flows/300s (89 flows/s), 32.156.000 packets/300s (107.186 packets/s), 1,198 GByte/300s (32 MBit/s) External 89.230.69.49, 2 flows/300s (0 flows/s), 2.000 packets/300s (6 packets/s), 0,000 GByte/300s (0 MBit/s) External 89.231.190.149, 1 flows/300s (0 flows/s), 3.000 packets/300s (10 packets/s), 0,000 GByte/300s (0 MBit/s) External 89.239.101.20, 1 flows/300s (0 flows/s), 1.000 packets/300s (3 packets/s), 0,000 GByte/300s (0 MBit/s)

    Read the article

  • Own DataFormWebPart: Unable to display this Web Part.

    - by user307852
    Hi, What I want is to display a paginable list from my custom data source. All came from the fact that I needed some logical relationships between seach scopes and some dates. I considered ContentQueryWebpart, but CAML is too complicated as I have plenty of different conditions, CoreResults webpart is too limited as it uses KeyWordQuery so I inherited from DataFormWebPart to display my own custom search results from my own custom xml source. Thats the best way i am aware of... I knew I needed some configuration to write in my pageLayout like MyWebParts:MyCustomWebPart etc so I went to Designer, put DataFormWebPart on a page, linked it to list of pages, and set multiple item view and that gave me some configuration.. Firstly i checked if DataFormWebPart works when put on pageLayout and it sucessfully displayed my pages list in pages library. But that was not what I wanted, i needed to set my own XML data source... I then changed the configuration of WebPartPages:DataFormWebPart to match mine and detach from any listName or listId and I change the XSL tag to much simplier to display all results and now I am getting: Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator. and there is no way to know what is wrong:/ The webpart public class MyCustomWebPart : DataFormWebPart{ public override void DataBind() { ...... XmlDataSource source = new XmlDataSource(); source.Data = doc.InnerXml; this.DataSource=source; base.DataBind(); } } The doc XML: <dsQueryResponse><Rows><Row URL="http://myserver/sites/sc/myDoc.doc" TITLE="Specification.doc" AUTHOR="System.String[]" /></Rows></dsQueryResponse> The webpart is in PageLayout, inserted without webpartzone: <MyWebParts:MyCustomWebPart runat="server" Description="" ListDisplayName="" PartOrder="2" HelpLink="" AllowRemove="True" IsVisible="True" AllowHide="True" UseSQLDataSourcePaging="True" ExportControlledProperties="True" DataSourceID="" Title="" ViewFlag="0" NoDefaultStyle="TRUE" AllowConnect="True" FrameState="Normal" PageSize="10" PartImageLarge="" AsyncRefresh="True" ExportMode="All" Dir="Default" DetailLink="" ShowWithSampleData="False" FrameType="None" PartImageSmall="" IsIncluded="True" SuppressWebPartChrome="False" AllowEdit="True" ManualRefresh="False" ChromeType="None" AutoRefresh="False" AutoRefreshInterval="60" AllowMinimize="True" ViewContentTypeId="" InitialAsyncDataFetch="False" MissingAssembly="Cannot import this Web Part." HelpMode="Modeless" ListUrl="" ID="g_c2180fb9_c667_42f3_aab3_c3340cb0ac5a" ConnectionID="00000000-0000-0000-0000-000000000000" AllowZoneChange="True" IsIncludedFilter="" __MarkupType="vsattributemarkup" __WebPartId="{C2233FB9-C667-42F3-AAB3-C334223C5A}" __AllowXSLTEditing="true" WebPart="true" Height="" Width=""> <Xsl> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/> <xsl:template match="/"> <xmp> <xsl:copy-of select="*"/> </xmp> </xsl:template> </xsl:stylesheet> </Xsl> <DataSources> <SharePoint:SPDataSource runat="server" DataSourceMode="List" SelectCommand="<View></View>" UpdateCommand="" InsertCommand="" DeleteCommand="" UseInternalName="True" ID="spdatasource3"> <SelectParameters> <asp:Parameter DefaultValue="0" Name="StartRowIndex"></asp:Parameter><asp:Parameter DefaultValue="0" Name="nextpagedata"> </asp:Parameter><asp:Parameter DefaultValue="10" Name="MaximumRows"></asp:Parameter> </SelectParameters> </SharePoint:SPDataSource> </DataSources> </MyWebParts:MyCustomWebPart>

    Read the article

  • NHibernate won't persist DateTime SqlDateTime overflow

    - by chris raethke
    I am working on an ASP.NET MVC project with NHibernate as the backend and am having some trouble getting some dates to write back to my SQL Server database tables. These date fields are NOT nullable, so the many answers here about how to setup nullable datetimes have not helped. Basically when I try to save the entity which has a DateAdded and a LastUpdated fields, I am getting a SqlDateTime overflow exception. I have had a similar problem in the past where I was trying to write a datetime field into a smalldatetime column, updating the type on the column appeared to fix the problem. My gut feeling is that its going to be some problem with the table definition or some type of incompatible data types, and the overflow exception is a bit of a bum steer. I have attached an example of the table definition and the query that NHibernate is trying to run, any help or suggestions would be greatly appreciated. CREATE TABLE [dbo].[CustomPages]( [ID] [uniqueidentifier] NOT NULL, [StoreID] [uniqueidentifier] NOT NULL, [DateAdded] [datetime] NOT NULL, [AddedByID] [uniqueidentifier] NOT NULL, [LastUpdated] [datetime] NOT NULL, [LastUpdatedByID] [uniqueidentifier] NOT NULL, [Title] [nvarchar](150) NOT NULL, [Term] [nvarchar](150) NOT NULL, [Content] [ntext] NULL ) exec sp_executesql N'INSERT INTO CustomPages (Title, Term, Content, LastUpdated, DateAdded, StoreID, LastUpdatedById, AddedById, ID) VALUES (@p0, @p1, @p2, @p3, @p4, @p5, @p6, @p7, @p8)',N'@p0 nvarchar(21),@p1 nvarchar(21),@p2 nvarchar(33),@p3 datetime,@p4 datetime,@p5 uniqueidentifier,@p6 uniqueidentifier,@p7 uniqueidentifier,@p8 uniqueidentifier',@p0=N'Size and Colour Chart',@p1=N'size-and-colour-chart',@p2=N'This is the size and colour chart',@p3=''2009-03-14 14:29:37:000'',@p4=''2009-03-14 14:29:37:000'',@p5='48315F9F-0E00-4654-A2C0-62FB466E529D',@p6='1480221A-605A-4D72-B0E5-E1FE72C5D43C',@p7='1480221A-605A-4D72-B0E5-E1FE72C5D43C',@p8='1E421F9E-9A00-49CF-9180-DCD22FCE7F55' In response the the answers/comments, I am using Fluent NHibernate and the generated mapping is below public CustomPageMap() { WithTable("CustomPages"); Id( x => x.ID, "ID" ) .WithUnsavedValue(Guid.Empty) . GeneratedBy.Guid(); References(x => x.Store, "StoreID"); Map(x => x.DateAdded, "DateAdded"); References(x => x.AddedBy, "AddedById"); Map(x => x.LastUpdated, "LastUpdated"); References(x => x.LastUpdatedBy, "LastUpdatedById"); Map(x => x.Title, "Title"); Map(x => x.Term, "Term"); Map(x => x.Content, "Content"); } <?xml version="1.0" encoding="utf-8"?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" default-lazy="false" assembly="MyNamespace.Core" namespace="MyNamespace.Core"> <class name="CustomPage" table="CustomPages" xmlns="urn:nhibernate-mapping-2.2"> <id name="ID" column="ID" type="Guid" unsaved-value="00000000-0000-0000-0000-000000000000"><generator class="guid" /></id> <property name="Title" column="Title" length="100" type="String"><column name="Title" /></property> <property name="Term" column="Term" length="100" type="String"><column name="Term" /></property> <property name="Content" column="Content" length="100" type="String"><column name="Content" /></property> <property name="LastUpdated" column="LastUpdated" type="DateTime"><column name="LastUpdated" /></property> <property name="DateAdded" column="DateAdded" type="DateTime"><column name="DateAdded" /></property> <many-to-one name="Store" column="StoreID" /><many-to-one name="LastUpdatedBy" column="LastUpdatedById" /> <many-to-one name="AddedBy" column="AddedById" /></class></hibernate-mapping>

    Read the article

  • How to simulate mousemove event from one window to another?

    - by Gohan
    Hello, I am trying to Create an empty window, which process the WM_MOUSEMOVE message in WinProc: case WM_MOUSEMOVE: { HWND otherHwnd = HWND(0x000608FC); POINT pt = {LOWORD(lParam), HIWORD(lParam)}; ClientToScreen(otherHwnd, &pt); PostMessage(otherHwnd, WM_TIMER, WPARAM(4096), 0); PostMessage(otherHwnd, message, wParam, lParam); SendMessage(otherHwnd, WM_NCHITTEST, NULL, (LPARAM)MAKELONG(pt.x, pt.y)); SendMessage(otherHwnd, WM_NCHITTEST, NULL, (LPARAM)MAKELONG(pt.x, pt.y)); SendMessage(otherHwnd, WM_NCHITTEST, NULL, (LPARAM)MAKELONG(pt.x, pt.y)); SendMessage(otherHwnd, WM_SETCURSOR, WPARAM(otherHwnd), (LPARAM)MAKELONG(HTCLIENT, WM_MOUSEMOVE)); break; } I hope I can hover the hyberlink in IE, but result is the hyberlink only be showed as hover style in a very short time, then it turn to normal, and then again hover, then normal. At www.amazon.com, when I simulate to hover the link("Today's Deals ") , the link is blinking. I think there is a better way to do it, even the IE window is covered with some other windows, it can make the IE act with the mouseevent. waiting for the best solution~ orz Above is the spy++ logs when I realy hover the link. and the simulate is as same as the real message <01277> 000608FC S WM_SETCURSOR hwnd:000608FC nHittest:HTCLIENT wMouseMsg:WM_MOUSEMOVE <01278> 000608FC R WM_SETCURSOR fHaltProcessing:False <01279> 000608FC P WM_MOUSEMOVE fwKeys:0000 xPos:406 yPos:50 <01280> 000608FC P WM_TIMER wTimerID:4096 tmprc:00000000 <01281> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01282> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01283> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01284> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01285> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01286> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01287> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01288> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01289> 000608FC S WM_SETCURSOR hwnd:000608FC nHittest:HTCLIENT wMouseMsg:WM_MOUSEMOVE <01290> 000608FC R WM_SETCURSOR fHaltProcessing:False <01291> 000608FC P WM_MOUSEMOVE fwKeys:0000 xPos:406 yPos:50 <01292> 000608FC P WM_TIMER wTimerID:4096 tmprc:00000000 <01293> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01294> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01295> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01296> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01297> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01298> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01299> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01300> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01301> 000608FC S WM_SETCURSOR hwnd:000608FC nHittest:HTCLIENT wMouseMsg:WM_MOUSEMOVE <01302> 000608FC R WM_SETCURSOR fHaltProcessing:False <01303> 000608FC P WM_MOUSEMOVE fwKeys:0000 xPos:406 yPos:50 <01304> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01305> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01306> 000608FC P WM_TIMER wTimerID:4096 tmprc:00000000 <01307> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01308> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01309> 000608FC S WM_NCHITTEST xPos:520 yPos:283 <01310> 000608FC R WM_NCHITTEST nHittest:HTCLIENT <01311> 000608FC S WM_NCHITTEST xPos:521 yPos:281 <01312> 000608FC R WM_NCHITTEST nHittest:HTCLIENT

    Read the article

  • Issue in Creating an Insert Query See Description Below...

    - by Parth
    I am creating a Insert Query using PHP.. By fetching the data from a Audit table and iterating the values of it in loops.. table from which I am fetching the value has the snapshot below: The Code I am using to create is given below: mysql_select_db('information_schema'); $select = mysql_query("SELECT TABLE_NAME FROM TABLES WHERE TABLE_SCHEMA = 'pranav_test'"); $selectclumn = mysql_query("SELECT * FROM COLUMNS WHERE TABLE_SCHEMA = 'pranav_test'"); mysql_select_db('pranav_test'); $seletaudit = mysql_query("SELECT * FROM jos_audittrail WHERE live = 0"); $tables = array(); $i = 0; while($row = mysql_fetch_array($select)) { $tables[$i++] =$row['TABLE_NAME']; } while($row2 = mysql_fetch_array($seletaudit)) { $audit[] =$row2; } foreach($audit as $val) { if($val['operation'] == "INSERT") { if(in_array($val['table_name'],$tables)) { $insert = "INSERT INTO '".$val['table_name']."' ("; $selfld = mysql_query("SELECT field FROM jos_audittrail WHERE table_name = '".$val['table_name']."' AND operation = 'INSERT' AND trackid = '".$val['trackid']."'"); while($row3 = mysql_fetch_array($selfld)) { $values[] = $row3; } foreach($values as $field) { $insert .= "'".$field['field']."', "; } $insert .= "]"; $insert = str_replace(", ]",")",$insert); $insert .= " values ("; $selval = mysql_query("SELECT newvalue FROM jos_audittrail WHERE table_name = '".$val['table_name']."' AND operation = 'INSERT' AND trackid = '".$val['trackid']."' AND live = 0"); while($row4 = mysql_fetch_array($selval)) { $value[] = $row4; } /*echo "<pre>"; print_r($value);exit;*/ foreach($value as $data) { $insert .= "'".$data['newvalue']."', "; } $insert .= "["; $insert = str_replace(", [",")",$insert); } } } When I Echo the $insert out of the most outer for loop (for auditrail) The values get printed as many times as the records are found for the outer for loop..i.e 'orderby= show_noauth= show_title= link_titles= show_intro= show_section= link_section= show_category= link_category= show_author= show_create_date= show_modify_date= show_item_navigation= show_readmore= show_vote= show_icons= show_pdf_icon= show_print_icon= show_email_icon= show_hits= feed_summary= page_title= show_page_title=1 pageclass_sfx= menu_image=-1 secure=0 ', '0000-00-00 00:00:00', '13', '20', '1', '152', 'accmenu', 'IPL', 'ipl', 'index.php?option=com_content&view=archive', 'component' gets repeated , i.e. INSERT INTO 'jos_menu' ('params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type', 'params', 'checked_out_time', 'ordering', 'componentid', 'published', 'id', 'menutype', 'name', 'alias', 'link', 'type') values ('orderby= show_noauth= show_title= link_titles= show_intro= show_section= link_section= show_category= link_category= show_author= show_create_date= show_modify_date= show_item_navigation= show_readmore= show_vote= show_icons= show_pdf_icon= show_print_icon= show_email_icon= show_hits= feed_summary= page_title= show_page_title=1 pageclass_sfx= menu_image=-1 secure=0 ', '0000-00-00 00:00:00', '13', '20', '1', '152', 'accmenu', 'IPL', 'ipl', 'index.php?option=com_content&view=archive', 'component', 'orderby= show_noauth= show_title= link_titles= show_intro= show_section= link_section= show_category= link_category= show_author= show_create_date= show_modify_date= show_item_navigation= show_readmore= show_vote= show_icons= show_pdf_icon= show_print_icon= show_email_icon= show_hits= feed_summary= page_title= show_page_title=1 pageclass_sfx= menu_image=-1 secure=0 ', '0000-00-00 00:00:00', '13', '20', '1', '152', 'accmenu', 'IPL', 'ipl', 'index.php?option=com_content&view=archive', 'component', 'orderby= show_noauth= .. .. .. .. and so on What I want is I should get these Values for once, I know there is mistake using the outer Forloop, but I m not getting the idea of rectifying it.. Please help... please poke me for more clarification...

    Read the article

  • python socket related question.

    - by paul
    Hello,All im totally new to socket programming in python. i was read some tutorial and manual, but i didn't found what i want to make python related socket script in manual or tutorial. i want to make socket script which can send some info to server and also receive some info from server. For example, i want to send my login information to server, and want to receive result reply from server. but i have no idea..how to send my login information(id and password) to server. i was captured with wireshark, some process to send login info to server. and i was found port number is 5300 and server ip is 58.225.56.152 and i was send id is 'aaaaaaa' and password 'bbbbbbb' and i was received 'USER NOT FOUND' result from server. how can i make this kind of process with python socket ? if anyone help me some reference or some example or anything help much appreciate! 0000 00 50 56 f2 c8 cc 00 0c 29 a8 f8 c0 08 00 45 00 .PV.....).....E. 0010 00 e2 2a 19 40 00 80 06 d0 55 c0 a8 cb 85 3a e1 ..*[email protected]....:. 0020 38 98 05 f3 15 9a b9 86 62 7b 0d ab 0f ba 50 18 8.......b{....P. 0030 fa f0 26 14 00 00 50 54 3f 09 a2 91 7f 13 00 00 ..&...PT?....... 0040 00 1f 14 00 02 00 00 00 00 00 00 00 07 00 00 00 ................ 0050 61 61 61 61 61 61 61 50 54 3f 09 a2 91 7f 8b 00 aaaaaaaPT?...... 0060 00 00 1f 15 00 08 00 00 00 07 00 00 00 61 61 61 .............aaa 0070 61 61 61 61 07 00 00 00 62 62 62 62 62 62 62 01 aaaa....bbbbbbb. 0080 00 00 00 31 02 00 00 00 4b 52 0f 00 00 00 31 39 ...1....KR....19 0090 32 2e 31 36 38 2e 32 30 33 2e 31 33 33 30 00 00 2.168.203.1330.. 00a0 00 4d 69 63 72 6f 73 6f 66 74 20 57 69 6e 64 6f .Microsoft Windo 00b0 77 73 20 58 50 20 50 72 6f 66 65 73 73 69 6f 6e ws XP Profession 00c0 61 6c 20 53 65 72 76 69 63 65 20 50 61 63 6b 20 al Service Pack 00d0 32 14 00 00 00 31 30 30 31 33 30 30 35 33 31 35 2....10013005315 00e0 37 38 33 37 32 30 31 32 33 03 00 00 00 34 37 30 783720123....470 0000 00 0c 29 a8 f8 c0 00 50 56 f2 c8 cc 08 00 45 00 ..)....PV.....E. 0010 00 28 ae 37 00 00 80 06 8c f1 3a e1 38 98 c0 a8 .(.7......:.8... 0020 cb 85 15 9a 05 f3 0d ab 0f ba b9 86 63 35 50 10 ............c5P. 0030 fa f0 5f 8e 00 00 00 00 00 00 00 00 .._......... 0000 00 0c 29 a8 f8 c0 00 50 56 f2 c8 cc 08 00 45 00 ..)....PV.....E. 0010 00 4c ae 38 00 00 80 06 8c cc 3a e1 38 98 c0 a8 .L.8......:.8... 0020 cb 85 15 9a 05 f3 0d ab 0f ba b9 86 63 35 50 18 ............c5P. 0030 fa f0 3e 75 00 00 50 54 3f 09 a2 91 7f 16 00 00 ..>u..PT?....... 0040 00 1f 18 00 01 00 00 00 0e 00 00 00 55 73 65 72 ............User 0050 20 4e 6f 74 20 46 6f 75 6e 64 Not Found

    Read the article

  • How to make MySQL utilize available system resources, or find "the real problem"?

    - by anonymous coward
    This is a MySQL 5.0.26 server, running on SuSE Enterprise 10. This may be a Serverfault question. The web user interface that uses these particular queries (below) is showing sometimes 30+, even up to 120+ seconds at the worst, to generate the pages involved. On development, when the queries are run alone, they take up to 20 seconds on the first run (with no query cache enabled) but anywhere from 2 to 7 seconds after that - I assume because the tables and indexes involved have been placed into ram. From what I can tell, the longest load times are caused by Read/Update Locking. These are MyISAM tables. So it looks like a long update comes in, followed by a couple 7 second queries, and they're just adding up. And I'm fine with that explanation. What I'm not fine with is that MySQL doesn't appear to be utilizing the hardware it's on, and while the bottleneck seems to be the database, I can't understand why. I would say "throw more hardware at it", but we did and it doesn't appear to have changed the situation. Viewing a 'top' during the slowest times never shows much cpu or memory utilization by mysqld, as if the server is having no trouble at all - but then, why are the queries taking so long? How can I make MySQL use the crap out of this hardware, or find out what I'm doing wrong? Extra Details: On the "Memory Health" tab in the MySQL Administrator (for Windows), the Key Buffer is less than 1/8th used - so all the indexes should be in RAM. I can provide a screen shot of any graphs that might help. So desperate to fix this issue. Suffice it to say, there is legacy code "generating" these queries, and they're pretty much stuck the way they are. I have tried every combination of Indexes on the tables involved, but any suggestions are welcome. Here's the current Create Table statement from development (the 'experimental' key I have added, seems to help a little, for the example query only): CREATE TABLE `registration_task` ( `id` varchar(36) NOT NULL default '', `date_entered` datetime NOT NULL default '0000-00-00 00:00:00', `date_modified` datetime NOT NULL default '0000-00-00 00:00:00', `assigned_user_id` varchar(36) default NULL, `modified_user_id` varchar(36) default NULL, `created_by` varchar(36) default NULL, `name` varchar(80) NOT NULL default '', `status` varchar(255) default NULL, `date_due` date default NULL, `time_due` time default NULL, `date_start` date default NULL, `time_start` time default NULL, `parent_id` varchar(36) NOT NULL default '', `priority` varchar(255) NOT NULL default '9', `description` text, `order_number` int(11) default '1', `task_number` int(11) default NULL, `depends_on_id` varchar(36) default NULL, `milestone_flag` varchar(255) default NULL, `estimated_effort` int(11) default NULL, `actual_effort` int(11) default NULL, `utilization` int(11) default '100', `percent_complete` int(11) default '0', `deleted` tinyint(1) NOT NULL default '0', `wf_task_id` varchar(36) default '0', `reg_field` varchar(8) default '', `date_offset` int(11) default '0', `date_source` varchar(10) default '', `date_completed` date default '0000-00-00', `completed_id` varchar(36) default NULL, `original_name` varchar(80) default NULL, PRIMARY KEY (`id`), KEY `idx_reg_task_p` (`deleted`,`parent_id`), KEY `By_Assignee` (`assigned_user_id`,`deleted`), KEY `status_assignee` (`status`,`deleted`), KEY `experimental` (`deleted`,`status`,`assigned_user_id`,`parent_id`,`date_due`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 And one of the ridiculous queries in question: SELECT users.user_name assigned_user_name, registration.FIELD001 parent_name, registration_task.status status, registration_task.date_modified date_modified, registration_task.date_due date_due, registration.FIELD240 assigned_wf, if(LENGTH(registration_task.description)>0,1,0) has_description, registration_task.* FROM registration_task LEFT JOIN users ON registration_task.assigned_user_id=users.id LEFT JOIN registration ON registration_task.parent_id=registration.id where (registration_task.status != 'Completed' AND registration.FIELD001 LIKE '%' AND registration_task.name LIKE '%' AND registration.FIELD060 LIKE 'GN001472%') AND registration_task.deleted=0 ORDER BY date_due asc LIMIT 0,20; my.cnf - '[mysqld]' section. [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking key_buffer = 384M max_allowed_packet = 100M table_cache = 2048 sort_buffer_size = 2M net_buffer_length = 100M read_buffer_size = 2M read_rnd_buffer_size = 160M myisam_sort_buffer_size = 128M query_cache_size = 16M query_cache_limit = 1M EXPLAIN above query, without additional index: +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ | 1 | SIMPLE | registration_task | ref | idx_reg_task_p,status_assignee | idx_reg_task_p | 1 | const | 1067354 | Using where; Using filesort | | 1 | SIMPLE | registration | eq_ref | PRIMARY,gbl | PRIMARY | 8 | sugarcrm401.registration_task.parent_id | 1 | Using where | | 1 | SIMPLE | users | ref | PRIMARY | PRIMARY | 38 | sugarcrm401.registration_task.assigned_user_id | 1 | | +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ EXPLAIN above query, with 'experimental' index: +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+ | 1 | SIMPLE | registration_task | range | idx_reg_task_p,status_assignee,NewIndex1,tcg_experimental | tcg_experimental | 259 | NULL | 103345 | Using where; Using filesort | | 1 | SIMPLE | registration | eq_ref | PRIMARY,gbl | PRIMARY | 8 | sugarcrm401.registration_task.parent_id | 1 | Using where | | 1 | SIMPLE | users | ref | PRIMARY | PRIMARY | 38 | sugarcrm401.registration_task.assigned_user_id | 1 | | +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Why Wifi no longer works 12.04.1

    - by Roger
    starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

    Read the article

  • H12 timeout error on Heroku

    - by snowangel
    Can anyone shed some light on what's causing this timeout error on Heroku (at 2012-07-08T08:58:33+00:00)? The docs say that it's because of some long running process. I've set config.assets.initialize_on_precompile = false in config/application.rb. EmBP-2:bc Emma$ heroku restart Restarting processes... done EmBP-2:bc Emma$ heroku logs --tail 2012-07-08T08:47:21+00:00 heroku[nginx]: 82.69.50.215 - - [08/Jul/2012:08:47:21 +0000] "GET /assets/application.js HTTP/1.1" 200 311723 "https://codicology.co.uk/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:47:21+00:00 heroku[nginx]: 127.0.0.1 - - [08/Jul/2012:08:47:21 +0000] "GET /assets/application.js HTTP/1.0" 200 1311615 "https://codicology.co.uk/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:51:32+00:00 heroku[slugc]: Slug compilation started 2012-07-08T08:54:05+00:00 heroku[api]: Release v145 created by [email protected] 2012-07-08T08:54:05+00:00 heroku[api]: Deploy 8814b2f by [email protected] 2012-07-08T08:54:05+00:00 heroku[web.1]: State changed from up to starting 2012-07-08T08:54:06+00:00 heroku[slugc]: Slug compilation finished 2012-07-08T08:54:09+00:00 heroku[web.1]: Stopping all processes with SIGTERM 2012-07-08T08:54:09+00:00 heroku[worker.1]: Stopping all processes with SIGTERM 2012-07-08T08:54:09+00:00 heroku[web.1]: Starting process with command `bundle exec unicorn -p 22429 -c ./config/unicorn.rb` 2012-07-08T08:54:10+00:00 app[worker.1]: [Worker(host:2046e0bf-e109-40f2-abdb-10f69d224483 pid:1)] Exiting... 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.320616 #1] INFO -- : reaped #<Process::Status: pid 8 exit 0> worker=1 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.376765 #1] INFO -- : master complete 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.376272 #1] INFO -- : reaped #<Process::Status: pid 5 exit 0> worker=0 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.011695 #1] INFO -- : worker=0 spawning... 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.011386 #1] INFO -- : listening on addr=0.0.0.0:22429 fd=3 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.017917 #5] INFO -- : worker=0 spawned pid=5 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.019309 #1] INFO -- : master process ready 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.018250 #5] INFO -- : Refreshing Gem list 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.016768 #1] INFO -- : worker=1 spawning... 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.020863 #8] INFO -- : Refreshing Gem list 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.020617 #8] INFO -- : worker=1 spawned pid=8 2012-07-08T08:54:12+00:00 app[worker.1]: SQL (2.9ms) UPDATE "delayed_jobs" SET locked_by = null, locked_at = null WHERE (locked_by = 'host:2046e0bf-e109-40f2-abdb-10f69d224483 pid:1') 2012-07-08T08:54:12+00:00 heroku[web.1]: Process exited with status 0 2012-07-08T08:54:13+00:00 heroku[web.1]: State changed from starting to up 2012-07-08T08:54:14+00:00 heroku[worker.1]: Process exited with status 0 2012-07-08T08:54:14+00:00 heroku[worker.1]: State changed from up to down 2012-07-08T08:54:14+00:00 heroku[worker.1]: State changed from down to starting 2012-07-08T08:54:20+00:00 heroku[worker.1]: Starting process with command `bundle exec rake jobs:work` 2012-07-08T08:54:20+00:00 heroku[worker.1]: State changed from starting to up 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:33+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:54:33+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:54:33+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:33+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:41+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:54:41+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:54:47+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:54:48+00:00 app[web.1]: I, [2012-07-08T08:54:48.467693 #8] INFO -- : worker=1 ready 2012-07-08T08:54:48+00:00 app[web.1]: I, [2012-07-08T08:54:48.823800 #5] INFO -- : worker=0 ready 2012-07-08T08:54:48+00:00 app[worker.1]: Starting the New Relic Agent. 2012-07-08T08:54:48+00:00 app[worker.1]: New Relic Agent not running. 2012-07-08T08:54:48+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] New Relic Ruby Agent Monitoring DJ worker host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1 2012-07-08T08:54:48+00:00 app[worker.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:49+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] Starting job worker 2012-07-08T08:57:54+00:00 heroku[web.1]: State changed from up to starting 2012-07-08T08:57:56+00:00 heroku[web.1]: Stopping all processes with SIGTERM 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047386 #1] INFO -- : reaped #<Process::Status: pid 5 exit 0> worker=0 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047753 #1] INFO -- : reaped #<Process::Status: pid 8 exit 0> worker=1 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047999 #1] INFO -- : master complete 2012-07-08T08:57:57+00:00 heroku[worker.1]: Stopping all processes with SIGTERM 2012-07-08T08:57:58+00:00 heroku[web.1]: Process exited with status 0 2012-07-08T08:57:58+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] Exiting... 2012-07-08T08:57:59+00:00 heroku[web.1]: Starting process with command `bundle exec unicorn -p 29766 -c ./config/unicorn.rb` 2012-07-08T08:58:01+00:00 app[worker.1]: SQL (27.9ms) UPDATE "delayed_jobs" SET locked_by = null, locked_at = null WHERE (locked_by = 'host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1') 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.070527 #1] INFO -- : listening on addr=0.0.0.0:29766 fd=3 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.070782 #1] INFO -- : worker=0 spawning... 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.074498 #1] INFO -- : worker=1 spawning... 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.075702 #1] INFO -- : master process ready 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.076732 #5] INFO -- : worker=0 spawned pid=5 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.076957 #5] INFO -- : Refreshing Gem list 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.089022 #8] INFO -- : worker=1 spawned pid=8 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.089299 #8] INFO -- : Refreshing Gem list 2012-07-08T08:58:02+00:00 heroku[worker.1]: Process exited with status 0 2012-07-08T08:58:02+00:00 heroku[worker.1]: State changed from up to down 2012-07-08T08:58:02+00:00 heroku[worker.1]: State changed from down to starting 2012-07-08T08:58:02+00:00 heroku[web.1]: State changed from starting to up 2012-07-08T08:58:10+00:00 heroku[worker.1]: Starting process with command `bundle exec rake jobs:work` 2012-07-08T08:58:11+00:00 heroku[worker.1]: State changed from starting to up 2012-07-08T08:58:28+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:58:28+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:58:33+00:00 heroku[router]: Error H12 (Request timeout) -> GET codicology.co.uk/ dyno=web.1 queue= wait= service=30000ms status=503 bytes=0 2012-07-08T08:58:33+00:00 heroku[nginx]: 127.0.0.1 - - [08/Jul/2012:08:58:33 +0000] "GET / HTTP/1.0" 503 601 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:58:33+00:00 heroku[nginx]: 82.69.50.215 - - [08/Jul/2012:08:58:33 +0000] "GET / HTTP/1.1" 503 601 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:58:42+00:00 app[worker.1]: New Relic Agent not running. 2012-07-08T08:58:42+00:00 app[worker.1]: [Worker(host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1)] New Relic Ruby Agent Monitoring DJ worker host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1 2012-07-08T08:58:42+00:00 app[worker.1]: Starting the New Relic Agent. 2012-07-08T08:58:42+00:00 app[worker.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:58:43+00:00 app[worker.1]: [Worker(host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1)] Starting job worker 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:59:02+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:59:02+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:59:02+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:59:02+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:59:24+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:59:25+00:00 app[web.1]: I, [2012-07-08T08:59:25.555052 #5] INFO -- : worker=0 ready 2012-07-08T08:59:25+00:00 app[web.1]: 2012-07-08T08:59:25+00:00 app[web.1]: 2012-07-08T08:59:25+00:00 app[web.1]: Started GET "/" for 82.69.50.215 at 2012-07-08 08:59:25 +0000 2012-07-08T08:59:26+00:00 app[web.1]: Processing by PagesController#home as HTML 2012-07-08T08:59:26+00:00 app[web.1]: I, [2012-07-08T08:59:26.043501 #8] INFO -- : worker=1 ready 2012-07-08T08:59:26+00:00 app[web.1]: Rendered pages/home.html.haml within layouts/application (5.7ms) 2012-07-08T08:59:26+00:00 app[web.1]: (1.1ms) SELECT COUNT(*) FROM "delayed_jobs" 2012-07-08T08:59:26+00:00 app[web.1]: Rendered layouts/_header.html.erb (4.2ms) 2012-07-08T08:59:26+00:00 app[web.1]: Rendered layouts/_footer.html.haml (1.4ms) 2012-07-08T08:59:26+00:00 app[web.1]: Completed 200 OK in 326ms (Views: 258.4ms | ActiveRecord: 65.2ms)

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >