Search Results

Search found 4572 results on 183 pages for 'dual monitors'.

Page 20/183 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Are there any 17-20 inch monitors that support displayport?

    - by WildJoe
    I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

    Read the article

  • What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the slowness of windows OS once again. It's Time to change with the Ubuntu 10.10 64bit for I like to use a faster Operating System. My Hard Disk laptop has a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything bad happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,ad Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I wanted to make: * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 10GB (Extended)(sda3) (Ubuntu 10.10 64bit) * Linux home Ext3 - 90GB (Extended)(sda4) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda5) * Linux root Ext3- 18GB (Extended) (sda6) (OpenSuse or Puppy or kubuntu) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195,1GB (Logical) * Linux root Ext4- 10GB (Extended) (sda4) * Linux swap swap- RAMx2 size, 6,1GB (sda5) * Linux home Ext3- 179GB (Extended) (sda6) When I installed Ubuntu,I didn't know if I could wipe all previous partitions,because of the RECOVERY partition. So I just made the space for my extended partition with GParted by deleting the HP_TOOLS (Fat32). By doing this I managed somehow to install Ubuntu 64 with Success. And I also made the partitions for the swap or a third Linux OS as Jordan suggested. But I couldn't actually make the partitions for the shared NTFS.(no option!) Question 1: What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the ever slow and buggy windoze OS once again. It's Time to change with the Ubuntu 10.10 64bit as a really faster Operating System. My Hard Disk laptop as a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I want to make based on your answers * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 100GB (Primary)(sda3) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda4) * Linux root Ext3- 15,9GB (Extended)(sda5) (OpenSuse or Puppy) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) **Partition 1 does not end on cylinder boundary.(?)** * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195GB (Logical) * Linux root Ext4- 10GB (Extended) (sda5) * Linux home Ext3- 185GB (Extended) (sda6) I didn't know if I could wipe all previous partitions when i installed Ubuntu because of the RECOVERY partition so I just made the space for my extended partition by deleting the HP_TOOLS (Fat32). By doing this I managed to make and successfully install Ubuntu 64 but I couldn't actually make the partition for the swap or a third Linux OS. Question 1: What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • grub workaround for cannot find UUID in dual boot system fails and now grub won't boot anything

    - by keepitsimpleengineer
    New clean install of x86 11.10 desktop. Dual boot with windows XP and Linux on separate drives. After install grub will not boot Windows, but by changing boot drive boots fine. When I go to fix this I find from http://bootinfoscript.sourceforge.net/ and a link to http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:search my problem, the message on the grub boot error screen: error: no such device: 6??????? So I follow the Step2 and compare the output of: sudo blkid and sudo nano /boot/grub/grub.cfg The UUIDs in both match for the Windows drive, so I do the fix in Step 4 "remove the search lines for …" in /usr/lib/grub/grub-mkconfig_lib, commenting out the three lines as before? # if fs_uuid="`${grub_probe} --device ${device} --target=fs_uuid 2> /dev/null`" ; then # echo "search --no-floppy --fs-uuid --set ${fs_uuid}" # fi I run sudo update-grub and check /etc/default/grub.cfg and see that it now identifies the Windows partition not by UUID, which I suppose is the workaround. But now when I try to boot 11.10 Desktop, I get: error: no such partition… … and when I try to boot Windows, I get: error: invalid signature. So Now, how do I fix this… The boot problem and find a workaround that works?

    Read the article

  • How to recover missing folders in a Windows-Ubuntu dual-boot system?

    - by UnhappyGhost
    I have Windows 7 and Ubuntu 12.04 as dual-boot and on the same 500GB HDD. I have partitioned the drive into NTFS file system from Windows before I installed Edubuntu 12.04 in the remaining free space. Now, there is a drive(G:) accessible through Windows and has few folders. I boot into Edubuntu and create a folder "LinTor" and download movies and few software from torrentz. Before I download, it showed 49GB free out of 62GB. After all the downloads it showed 31GB free out of 62GB. Then I boot into Windows and I couldn't find this "LinTor" folder. I wondered that might be happening as I hibernate Edubuntu (using sudo pm-hibernate) and then boot into Windows. I then create another folder in the same drive(G:) with the name "001" to check if this was accessible from Edubuntu. Now I reboot into Edubuntu to find that "LinTor" folder has disappeared and "001" folder wasn't showing up either. Surprisingly, the drive size still shows 31GB free out of 62GB but when I check it from Windows, it shows 49GB free of 62GB. There is one thing I would like to mention. When I was trying to unmount the NTFS drive(G:) from Edubuntu before booting into Windows, it prompted me with this message: Do you want to empty the trash before you unmount the drive? Once the trash is emptied the data is permanently deleted and cannot be recovered. Please help me understand what could be the problem and how do I recover the missing folder?

    Read the article

  • Make Windows Position Your Dual Monitors Correctly

    - by Mysticgeek
    If you have a dual monitor setup and each monitor is a different size or height, it can be annoying trying to move the mouse pointer between them. Here is a quick tip that will help make the process easier. Align Monitors In our example, we’re using Windows 7, but the process is essentially the same in all versions, but getting to Display Settings is different. In Windows 7 open the Start menu and type display settings into the search box and hit Enter. In Vista right-click the desktop and click Personalize. Then from the Personalize appearance and sounds menu click on Display Settings. In XP right-click on the desktop and select Properties then in Display Properties click the Settings tab. Now here is where you can change the appearance of your monitors. In this example we have a larger 22” LCD and a smaller 19” and it can be annoying getting the mouse pointer from one to another depending where you are on each monitor. So what you want to do is simply move each display around to a particular height so it’s easier to get the pointer over. For example with this setting we know we’ll have no problem moving the pointer to the other screen at the top of each display.   Of course here you can flip your monitors around, change the display resolution, orientation, etc. If you have dual monitors where one might be larger or set up higher than the other, then this is a great way to get them finely tuned. You will have to play around with the settings a bit to settle on what works best for you. Similar Articles Productive Geek Tips GeekNewb: Get to Know These Windows 7 HotkeysDual Monitors: Use a Different Wallpaper on Each DesktopSet Windows as Default OS when Dual Booting UbuntuEasily Set Default OS in a Windows 7 / Vista and XP Dual-boot SetupSet XP as the Default OS in a Windows Vista Dual-Boot Setup TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7 Need Help with Your Home Network?

    Read the article

  • New laptop, Windows 8.1, attempting dual install. Ubuntu installer doesn't 'see' existing OS

    - by Flaminica
    Though I've used Ubuntu for a few years, I'm new to installation. Previously I had help and now I'm doing it alone (moved across the world). Windows 8.1 came preinstalled on my new laptop (Toshiba Satellite C70-A-17C - Core i5, 8 GB RAM, 750 GB HDD). I have already followed a few steps I found online to prepare for a dual install (with Ubuntu 14.04). I backed up Windows, created a bootable Ubuntu USB and DVD (just in case one didn't work), turned off fast boot and secure boot, and shrunk C:/. The new unallocated drive portion is 292.97 GB. After shrinking C:/, I restarted Windows a couple of times to make sure everything was working fine (it is). I then attempted to install with the Ubuntu live USB. However, the Ubuntu installer doesn't see that Windows 8.1 is already installed. I don't understand, and don't want to mess with Ubuntu partitioning when I don't know where the partitions will be created. My concern is that, if I go further with the installation process, Windows might be overwritten or compromised in some way. I then tried to reboot using the Ubuntu live DVD, thinking I might get a different result. However, I can't figure out how to make the laptop boot from the CD drive. I went into the BIOS and found no option there, either. Any help is very appreciated! EDIT: Looks like I can't link directly to each photo. Here is my album of screenshots: http://imgur.com/a/zChCo Here you can see that there's no option to boot from CD drive, only USB. Everything looks okay so far. I don't understand this. Ubuntu has not yet been installed. Unmounting partitions? (I chose 'no'.) Even though the laptop came pre-installed with Windows 8.1, the Ubuntu USB installer can't see it. I chose 'something else'. I need to pick and format partitions. I scrolled down and took a second shot to include all information. Completely lost and cancelled installation.

    Read the article

  • Can the Microsoft Surface Pro drive multiple external monitors?

    - by ahsteele
    I am interested in simultaneously connecting two Dell UltraSharp 2407WFP 24-inch Widescreen Flat Panels to my Microsoft Surface Pro. Currently I am attempting to utilize a StarTech Mini DisplayPort to DisplayPort / DVI / HDMI Multifunction Adapter by connecting one monitor to the adapter via HDMI and the other via DisplayPort. Unfortunately, I am only getting video on the Surface itself and the monitor connected via DisplayPort. Is this StarTech adapter capable of simultaneously driving two monitors? Is the Surface itself even capable of driving two monitors?

    Read the article

  • How to toggle between different monitors with one key on Windows 7?

    - by user443854
    I recently found a post on switching between different sound cards with one key stroke (the answer I ended up using is Default Audio Changer). I am looking for similar functionality for switching between monitors. Win+P is not good enough, as it loops between four choices: Computer | Duplicate | Extend | Projector, and I want to toggle only between two monitors. It also takes at least four key strokes to toggle.

    Read the article

  • Asus X202e VivoBook, dual boot. How to get around UEFI and have Win8 & Ubuntu?

    - by Nukeface
    I've gotten my hands on an Asus Vivobook X202e. I like it, handy to use, small, etc etc. Oh, it's the i3 core version. For school I still need Windows * sigh * for the .NET development. (I know, possible in Ubuntu, this n that, but for ease atm wanting to keep it with Win8). So. How to install both on this little thing? I've found a way into the BIOS (before splash screen, mash F2. Works only after reboot, not cold boot). But the whole boot loading setup is different than from what I know, and I must've messed up something because it's been "Attempting Repairs", "Analyzing hard disk", and a bunch of other things for the past 15 minutes. (All I've done is selected "disabled" on secure boot, picky as ** Microsoft). Keeping the original Windows installation is of no concern. Found the product key already and have a clean install waiting. BTW, not trying to leech knowledge, even though first question and no answers. I'm more and more active on Stackoverflow. But, especially due to secure boot and windows 8, I'm going over to Ubuntu. Well, more and more anyway, I like my Windows based games as well ;) UPDATE Managed to do a clean install of Windows 8 Pro. After disabling Secure Boot, also had to disable fast boot, and enable Launch CSM, leaving the option which appeared (Launch PXE OpROM) disabled. Then I rebooted, with the USB Boot drive I created using the Windows 7 USB DVD Download Tool (scroll down for download link), provided by Microsoft. During the installation, I chose to install a clean version, therefor deleted the partitions containing current windows files. I left the Recovery partition (you never know...). Of course, the new Windows Installation dit not like this. Apparantly Windows cannot be installed on a GPT hard disk. Remember I hadn't changed the partition table, was still factory default! Minus a few partitions, granted. So deleted ALL partittions, did a format of the disk, created a new partition. Et voila, Windows installation started. FINALLY! WONDROUS After the installation, Windows still had background images located in C:/Users/ ME /AppData/Local/Microsoft/Themes/RoamedThemeFiles/DesktopBackground/ that I had in the previous installation. Before doing: format, delete partition, cascade partitions, create new partition of different size, format partition, install Windows. It managed to keep the images through all that. Anyone got an idea on that one? It also remembered the settings for the Windows Aero theme... UPDATED QUESTION: After all this you'd think I'd have the rest figured out. Wrong. Ubuntu 12.10, 64 bit installation can't read the partitioning of the hdd during the installation. Any ideas on how to fix this so the install for a dual-boot system can proceed? (Preferably without starting anew with Windows as well ;) )

    Read the article

  • ATI Radeon 5850 I cant seem to get 3 monitors up at the same time. 2 Monitors and a HDTV but still.

    - by Jan
    Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

    Read the article

  • Dark themes in IDE with multiple monitors

    - by nivlam
    There has been numerous posts about developers that prefer a dark color scheme in their IDE. Most of the themes at studiostyl.es are dark themes. Back when I had a single monitor, I did enjoy using a dark theme since it was easier on the eyes. But now that I utilize multiple monitors, I find dark themes actually hurt my eyes. Most of the time I have my IDE open on one monitor and a browser/email/documentation open on my other monitors. Only my IDE has a dark theme and most of websites/documentation have a white background. This forces my eyes to constantly adjust between my dark IDE and the white website, which puts strain on my eyes. I'm sure I'm not the only person who tries to use a dark theme for the IDE and have multiple monitors. How do other people deal with this issue?

    Read the article

  • Rendering Unity across multiple monitors

    - by N0xus
    At the moment I am trying to get unity to run across 2 monitors. I've done some research and know that this is, strictly, possible. There is a workaround where you basically have to fluff your window size in order to get unity to render across both monitors. What I've done is create a new custom screen resolution that takes in the width of both of my monitors, as seen in the following image, its the 3840 x 1080: How ever, when I go to run my unity game exe that size isn't available. All I get is the following: My custom size should be at the very bottom, but isn't. Is there something I haven't done, or missed, that will get unity to take in my custom screen size when it comes to running my game through its exe? Oddly enough, inside the unity editor, my custom screen size is picked up and I can have it set to that in my game window: Is there something that I have forgotten to do when I build and run the game from the file menu? Has someone ever beaten this issue before?

    Read the article

  • Dark themes in IDE with multiple monitors [closed]

    - by nivlam
    There has been numerous posts about developers that prefer a dark color scheme in their IDE. Most of the themes at studiostyl.es are dark themes. Back when I had a single monitor, I did enjoy using a dark theme since it was easier on the eyes. But now that I utilize multiple monitors, I find dark themes actually hurt my eyes. Most of the time I have my IDE open on one monitor and a browser/email/documentation open on my other monitors. Only my IDE has a dark theme and most of websites/documentation have a white background. This forces my eyes to constantly adjust between my dark IDE and the white website, which puts strain on my eyes. I'm sure I'm not the only person who tries to use a dark theme for the IDE and have multiple monitors. How do other people deal with this issue?

    Read the article

  • Have programmers at your work not taken up or been averse to an offer of a second monitor?

    - by Chris Knight
    I'm putting together a business case for the developers in my company to get a second monitor. After my own experiences and research, this seems a no-brainer to me in terms of increasing productivity and morale/happiness. One question which has niggled me is if I should be pushing to get all developers onto a second monitor or let folk opt-in (i.e. they get one if they want one). Thoughts on this are welcome, but my specific question relates to a snippet on this site: But when the IT manager at Thibeault's company asked other employees if they wanted dual monitors last year, few jumped at the offer. Blinded by my own pre-judgement, this surprised me. Has anyone else experienced this? I fully appreciate that some people prefer a single larger monitor, but my general experience of researching the web suggests that most programmers prefer a dual (or more) setup. I'm guessing this should be tempered with the thought that those developers who contribute to such discussions might not be considered your average developer who might not care one way or the other. Anyway, if you have experienced the above have you tried to sell the concept of dual monitors to the masses? If everyone just got 2 monitors regardless if they wanted it or not, were there adverse reactions or negative effects? UPDATE: The developers are on a mixture of 17", 22", or 24" single monitors. The desks should be able to accommodate dual 22" monitors as I am proposing, though this will take some getting used to I imagine.

    Read the article

  • Force full-screen game to one monitor?

    - by Joachim Pileborg
    I have two monitors, one 1920x1200 and the other 1920x1080, and in 10.10 they were "separate". As in when I opened the display preferences they were shown as separate screens. Since installing (from scratch) 11.04 I instead have one giant 3840x1200 screen spread over the two monitors. Not a problem per se, except when I want to play full-screen games! When playing games I want them to be on the primary (1920x1200) monitor, but since the game only detects one screen I cant do that, even if I lower the resolution in-game. I have a nVidia GTS 250 card, using nvidia-current driver (version 270.41.06), even though "Additional Drivers" reports the driver is "activated but not currently in use". Is there a way to force the game to use only one of the monitors? Or make the game detect both monitors?

    Read the article

  • Multi Monitor Setup Problems

    - by Shamballa
    I have Ubuntu 10.04 LTS - the Lucid Lynx. I have until recently been using a nVida Graphics card (NVIDIA GeForce 9800 GT) with two monitors attached, this all worked fine and dandy. A couple of days ago I bought two new identical LCD monitors for a multi monitor setup and two ATI graphics cards (ATI Sapphire Radeon HD5450). NOTE *All monitors work fine in Windows XP, 2k, Vista and 7 After I had booted into Ubuntu only one display came on, that I kind of expected anyway, then I removed the driver for the nVidia card and downloaded the ATI version which gave me the ATI Catalyst Control Center - in that only two of the displays were showing the third was disabled and showing unknown driver. I enabled the third monitor that stated "Unkown Driver" and had to reboot, upon reboot none of the displays work. I restarted and booted up into recovery mode and from now that is only what I can get into using a failsafe driver. It seems according to the log that a server is already active for Display 0 and I have to remove /tmp/.X0-lock and start again. This is what the log file is saying: Fatal Server Error Server is already active for display 0 if this server is no longer running, remove /tmp/.X0-lock and start again. (WW) xf86 closeconsole: KDSETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETSTATE failed: Bad file descriptor ddxSigGiveUp: closing log I have tried looking at my xorg.config file but unfortunately I have not really got a clue as to how it "should" be - I have tried regenerating it using this command from a terminal: sudo dpkg-reconfigure -phigh xserver-xorg but that had no effect so I am currently stuck in failsafe driver mode but two monitors are active but are mirroring each other. I hope that this is not to long - looking back I have been going on a bit! but I am just trying to explain as much as I can... I have asked this on Linuxquestions but nobody seems to know either or at least I have not had any responses. Could some kind soul please help explain what I can do from here? I would be eternally grateful. Chris * Update * Removing xorg.conf does nothing other than allowing me to use only two monitors - using the command: sudo aticonfig --initial generates the xorg.conf file below: but does not work either - I just get two monitors... Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I have tried using this command from a thread on the Ubuntu Forums with a question similar to mine: sudo aticonfig --initial=dual-head --adapter=all Generated xorg.conf file Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-1" Screen "aticonfig-Screen[1]-1" RightOf "aticonfig-Screen[1]-0" EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-1" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-1" Driver "fglrx" BusID "PCI:2:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-1" Device "aticonfig-Device[0]-1" Monitor "aticonfig-Monitor[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-1" Device "aticonfig-Device[1]-1" Monitor "aticonfig-Monitor[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection This upon reboot renders ALL monitors blank and I have to go into recovery mode and use a failsafe driver. This is so much harder than I thought it would be, I don't think Ubuntu likes ATI for multi (3) monitors or maybe the other way around. Can anyone help still?

    Read the article

  • Triple Monitor Setup with Nvidia and Compiz

    - by AndrewX192
    I have a triple monitor setup with two video cards on Ubuntu 10.04. I have the monitors and graphics cards currently setup as follows: Nvidia Geforce 210 #1 - 1920x1080 Monitor (Twinview) [Center - Monitor #1] - 1920x1080 Monitor (Twinview) [Right - Monitor #2] Nvidia Geforce 210 #2 - 1920x1080 Monitor (Separate X Screen) [Left - Monitor #3] This works fine, except when I open a program, it shows up in between monitor #1 and #2 - meaning I have to drag it to one screen before I can use the window. Gnome2's gnome-panel also does not work on the twinview setup; it spans between both monitors, but it does not redraw (ex: the clock never changes). In addition, when I maximize an application, it spans both monitors, which is not acceptable. When I enable Xinerama for my setup, gnome-panel no longer spans two monitors, and applications maximize as expected, but compiz does not work, as X11 compositing is not available. The lack of desktop compositing causes problems with dragging windows between screens (redraws take forever). Is there anything I can do to fix these issues without opting for different graphics cards?

    Read the article

  • Four monitor setup with two Nvidia graphics cards

    - by user94329
    I'm running Ubuntu 12.04 and I have two nVidia quadro 2000 video cards, each with two monitors plugged in (all 4 monitors are identical). Now I have the latest nVidia drivers, and I'm trying to use the nVidia control panel to use all four monitors, and I can't get it to work. Currently, my configuration is using TwinView to have 2 monitors per X screen. This doesn't work well because either i turn xinerama on, and nothing appears on the screen when I start a X session with Compiz enabled. Things only work in Ubuntu 2D. i turn xinerama off, and compiz works, but now, I cant drag windows between the two screens and i have no idea how to start applications in the other screen. Is there a better way to configure my four monitor setup? Is there a way to get both GPUs onto a single X screen?

    Read the article

  • Show WindowsForm in the center of the Screen (Dual Screen)

    - by serhio
    I have Dual Monitors and want displaying a windows form in the center of the screen. (I have a variable MonitorId=0 or 1). I have: System.Windows.Forms.Screen[] allScreens=System.Windows.Forms.Screen.AllScreens; System.Windows.Forms.Screen myScreen = allScreens[0]; int screenId = RegistryManager.ScreenId; // DualScreen management if (screenId > 0) { // Possede 2-ieme ecran if (allScreens.Length == 2) { if (screenId == 1) myScreen = allScreens[0]; else myScreen = allScreens[1]; } } this.Location = new System.Drawing.Point(myScreen.Bounds.Left, 0); this.StartPosition = FormStartPosition.CenterScreen;

    Read the article

  • 3 monitors + a TV on a single card with Eyefinity?

    - by Paul Accisano
    Greetings all, Right now I have a fairly standard video card with 2 DVI ports, one powering my single monitor and another powering my HDTV (with a DVI-to-HDMI cable), which are in separate rooms. I never need to have my monitor and TV active at the same time. I'm looking into a possible computer upgrade. I'd like to know if the following situation is possible. I want three monitors on my desk powered by a single card, which I hear these new Eyefinity cards are capable of. But, I also want my TV hooked up. At any given time, I would want either my three monitors active or my TV active, never both at once. So it seems to me it might be possible to do this all a single 3-port card with a splitter of some kind. Is this possible? What hardware would I need? Thanks!

    Read the article

  • Can Acer Aspire Revo (Atom 330) be used with two monitors simultaneously?

    - by LeeD
    I'm so attracted to Acer Revo for the price & the look. As long as I can work on two monitors simultaneously, I'll be happy. Not planning to do heavy video editing or gaming. Occasional movie streaming would be fine. Will mainly use it to do trading, lots of word processing, some photo editing, connecting with friends. Anyone has experience using Revo with 2 or more monitors? The spec says it has VGA and HDMI output but Acer sales person over the phone told me it can support one monitor only..??

    Read the article

  • How do I fake 2 discrete monitors using a DualHead2Go?

    - by Sietse
    I just got a [Matrox Dualhead2Go|http://www.matrox.com/graphics/en/products/gxm/dh2go/] for use with my MacBook Pro. I realise that the reason it works is that it fakes 1 big (wide) monitor. I also kind of depended on the software that came with it to trick OSX into accepting it as 2 monitors. Turns out the support is kind of lame: it just adds shortcuts for maximizing the window to whatever screen you want. And it even gets that wrong, since my dock doesn't auto-hide, but it doesn't take it in account while resizing, causing my window do end up "behind" my dock. (I've made a AppleScript that does the resize correctly, that I'll post below). There's two glaring issues this causes: Full screen (video, etc.) takes up both monitors, and dialogs just pops up in the middle. Is there a way to trick OSX, or at least a way to fix these issues?

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >