Search Results

Search found 4572 results on 183 pages for 'dual monitors'.

Page 21/183 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Want 2 external monitors with a 13' MacBook - is this possible?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• Is there a way to plug two monitors into a single laptop VGA port?

  - by Andrew G. Johnson

  Is there some kind of reverse splitter so I can plug two monitors into my laptop's VGA port?

  Read the article

• How do I remove my Windows 7 setup from a Windows/Ubuntu dual-boot?

  - by Tom

  Previously my OS was Window 7 and some day it began to show problems with booting and finally it didn't boot at all. I tried to repair it but it didn't get repaired. Then I installed Ubuntu 14.04 LTS alongside Windows and am impressed much by Ubuntu. So I want to remove all my Windows files. I searched Google to know how to do it and I found OS-Uninstaller. I have some doubts before proceeding with OS-Uninstaller - I need to keep my photos, songs, movies and personal files in my system even if Windows is removed. Normally Windows files are installed in the C Drive. My personal files are not in the C Drive. So will removing Windows files affect my personal files ? Did the OS-Uninstaller affect Ubuntu anyway ? Please note that I want to remove only the Windows installation files(the files added to my system by Windows during its installation). I don't want to change the NTFS partition to any other format since there is a probability that I will install newer version of Windows later.

  Read the article

• How to setup whole-disk encryption with dual boot on a MacBook Pro (generation 9,2 with 12.04)

  - by blueyed

  I can install Ubuntu 12.04 on the MacBook when using the "noapic" kernel boot option, using the alternate amd64+mac image (from http://cdimage.ubuntu.com/releases/12.04/release/ ). But after installation the screen turn sblack after trying to boot "Windows" (as named in the boot menu that shows up when holding Option/Alt during startup). I want to use whole-disk encryption and given that only one free partition is available, I have setup LVM to do so: - vg0 contains bootlv and cryptlv - in cryptlv I have setup encryption with another LVM volume group (vg1, which holds swaplv, rootlv and homelv) I have not installed Grub during installation (because I was not sure about the partition) and when trying to install it later on /dev/sda4 (which contains the outer LVM) it complained that it could not determine the file system, and --force did not help either. The black screen / behavior looks similar to starting the installer without enabling the noapic option.

  Read the article

• WIN7 and Ubuntu lost after Installing ubuntu 12.04 and win7 dual system ,I have no OS on my laptop now

  - by abos

  Here is the procedure: In the morning I installed ubuntu using a USB directly without config any thing to my win7 system. After install complete, ubuntu installation software tell me to reboot.And everything is just find. While rebooting, there is NO UBUNTU system for me to select,and my laptop go straight to log in using WIN7. NO ubuntu shows on WIN7's configuration(Default System). Log in ubuntu using usb(try ubuntu without installation), I can find ubuntu's filesystem was already there. Formatting the disk on WIN7's disk management, rearranging them to other disk.Still having no trouble with WIN7. In the afternoon try a few times of installation and uninstallation of ubuntu. still shows no sign of selecting ubuntu system. In the evening another trial while installing ubuntu with the third option of: installing ubuntu alongside with INW7, erase win7 and install ubuntu. somethingelse --- my check failed with configuartion for what comes out with the 'something else' option,reboot. And I have no system now with some cmd tips say: Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key. Files those on win7's orginal file system and Ubuntu filesystem can still be found when I 'try ubuntu without installation'. 5.But I just got no OS when I reboot my laptop normally.

  Read the article

• Dual Booting Windows 7 and Ubuntu 12.04. Partition Sizes?

  - by John F.

  I'm about to reinstall Windows, so I thought that I'd try Ubuntu out on a partition just for fun. My question is, how large should my partitions be for each of them? I know this various depending on what you use, so i'll give you a general idea of what I have, and what I have in mind. I'm currently running: Windows 7 Professional (64bit) RAM: 4GB CPU: 2.5Ghz Quad Core processor HDD: 500GB GPU: 1GB Nvidia GeForce I have around 130GB in Steam games, and some heavier applications like Photoshop CS6, Sony Vegas Pro 11. But other Applications I use are: Chrome Skype Dxtory Fraps OpenOffice BitTorrent and other assorted smaller programs. So, I was thinking that I would give my Windows partition about 150-200GB, my Ubuntu Partition around 20GB, and the rest to shared storage. I'm not really sure if I'd need more or less on Ubuntu, because I've never used it and I'm not really sure what kind of apps i'd be using over there. This would also be a clean install, so I'd be wiping my HDD, creating the Partitions in GParted, then installing Windows with Ubuntu following that. Any critique you could give me? Maybe explanations to what the /root, /boot and /home partitions I hear are about? Thanks in advanced if you actually read this lengthy thing! Any help is appreciated. (x

  Read the article

• Is it Possible to Repair Boot Record on Windows Vista Partition on Dual Boot Ubuntu 12.04.02 LTS Install?

  - by PasBonRJB

  I recently successfully installed Ubuntu 12.04.02 Desktop as a "side-by-side" on an eMachines ET1641-02w PC; which before had Windows Vista; but was no longer bootable, because the boot sector somehow got trashed. After I installed Ubuntu I can go to Devices/OS and I can access all of my docs, pics, videos, music, etc. on the Windows Vista partition; but I still can't "boot" the Windows partition. I've seen several posts regarding recovering boot sectors using the Boot-repair app; but am wondering if this "boot-repair" is only for the Ubuntu partition. Can I use "boot-repair" to repair the Windows Vista boot sector?

  Read the article

• Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

  - by Joe

  After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

  Read the article

• How to remove Ubuntu from dual boot system with Windows 7?

  - by user71307

  I wish to remove Ubuntu and I'm not quite sure how. I know it has something to do with partitions. I have 3 partitions. 1. OS [683 GB] 2. Recovery [14 GB] 3. Ubuntu 12.04 LTS (E:) I know it says Ubuntu but when I installed Ubuntu I think I put 14 gigabytes for it so I think its the recovery one but I'm not sure. I could have sworn I put more than 700 megabytes for it. I have googled this and I can't seem to find an answer. Any help would be nice.

  Read the article

• 6 steps to implement DUAL security on WCF using User name + SSL

  6 steps to implement DUAL security on WCF using User name + SSL

  Read the article

• Windows 8 Metro/Modern Start Screen with Multiple Monitors -- Keep it always maximized?

  - by Jersey Dude

  Before installing Win 8 today, my plan was to keep the Metro UI up on my smaller, laptop monitor and have the classic UI running on my two larger monitors. However, in reality, as soon as I click on something in one of the classic UI monitors, the Metro UI minimizes (thus exposing the classic UI in its place). Is there any way to keep the Metro UI from minimizing when I do something in another monitor? Oddly enough, if there is an app running/suspended in the Metro Window, then the Metro UI is not minimized. If the Start screen is currently viewed, clicking in a classic window/monitor switches the Metro UI from the start screen to the last run app. Very peculiar..

  Read the article

• How to set up an extended desktop on dual monitors in Kubuntu 9.04?

  - by Dennis

  I'm using my laptop (Lenovo Thinkpad T60) and I have a secondary monitor (which has a different resolution than my laptop screen) connected by VGA. Kubuntu recognizes the monitor and it functions but my desktop is mirrored (i.e. an identical copy) across the dual monitors (which is useless to me). How can I extend my desktop across both monitors? P.S. I googled it but the solutions I found weren't standard, they were hardware specific and you had to manually change system files, etc.. There must be an easier way. edit: Here is a snapshot of the settings.

  Read the article

• Dual boot :Windows 7 partition deleted after Kubuntu 14.04 install...Weird!

  - by user292152

  I've bought two new SSD's in order to install Kubuntu on one and Win 7 on the other one. Before I had Linux Mint and Win7 together one just one SSD. So first I installed win7 as recommended, and then used the guided installer of Kubuntu to install Kubuntu. I selected the second SSD, chose the option "use entire disk and install", but to my surprise after rebooting and selecting win7 boot loader from grub2, I got a prompt that my windows installation is damaged, and I need to run the repair option from the installation disk. So I booted into Kubuntu again, fired up kparted and saw that indeed my windows partition got deleted, except the recovery partition. I don't understand what happened. I am not new to this topic, and this was not my first time installing Ubuntu alongside windows. I have never ever had that problem. What can I do to make sure this won't happen again, so I won't waste another 2 hours of my life? ?? Thanks a lot !

  Read the article

• Failed Vista/Ubuntu 12.04 attempt at dual boot. Can only boot Ubuntu now

  - by mathematician1975

  I recently tried installing Ubuntu 12.04 alongside my Windows Vista install. I can boot fine into Ubuntu every time, but now every time I choose to boot into Windows, the process fails completely and restarts (or shuts down) my laptop. Is there anything I can do to recover this. I am very happy with Ubuntu and I do not want to recover my old Vista installation to overwrite it, but I do need to be able to use both OS's. Is it recoverable or should I start from scratch?

  Read the article

• How to avoid problems when installing Ubuntu and Windows 7 in dual-boot?

  - by BlaXpirit

  I want to try out Ubuntu (and hopefully choose it as my primary OS). After looking at many versions of it in VirtualBox and from Live CD, I've finally decided to install it. So I defragmented and shrinked one of the partitions to make room for Ubuntu. My current setup (after shrinking the D: partition): [·100 MB·] [······250000 MB······] [·······600000 MB·······] [··100000 MB···] Reserved Windows 7 system (C:) Data (D:) Free space NTFS NTFS NTFS (for Ubuntu) The Internet (including AskUbuntu) is full of scary stories about Windows not loading after installation of Ubuntu, something about installing GRUB to a wrong partition, etc. As I am a newbie to Linux and Ubuntu, it is very easy for me to do something wrong. Please mention the problems that may appear and explain how to avoid them. Ubuntu version that will be installed: 10.10 Desktop amd64 Please note that I have installed Windows 7 about a year ago, so I have much to lose if something goes wrong. I want to be very careful because there is no way for me to backup all the data.

  Read the article

• How to Dual Boot Windows 7 and Ubuntu 12.10?

  - by user108329

  So firstly I tried to install Ubuntu, from the website to run alongside Windows. Went through Wubi etc. Asked me if I wanted to try or Install, I selected install. I selected option to run alongside Windows 7 but when it was partitioning it failed and I only had the fresh install as an option as probably Windows became corrupt then? So I installed Windows again, ran Ubuntu from the livecd, went into gpartition, didn't really know what I was doing but anyhow, resized a partition which was 698gb, one was 100mb, I guessed CD drive. Gparted said it was gonna take three hours, so I took that for meaning Windows was corrupt again. Your help is greatly appreciated. Thanks

  Read the article

• How to maximise a Single Window across Multiple Monitors?

  - by LePressentiment

  Say I've 3 monitors. I'll instantiate with http://www.texpaste.com/. What would I need for: The leftmost toolbox to be on the leftmost monitor? The center input blank field on the center monitor? The rightmost output display box on the rightmost monitor? Another example with 2 monitors: http://mathb.in/ Analogously, in this case, I'd want: The input blank field for the code on the left monitor? The rightoutput display box on the right monitor?

  Read the article

• How can I span wallpapers over two monitors in Mac OS X?

  - by Todd Hunter

  Is there any way to get a single wide desktop wallpaper to span a dual monitor setup in OS X?

  Read the article

• Triple-monitor set-up (2 unique, 1 cloned): Can a VGA splitter be used on one output of a dual-head

  - by stakx

  Background: I'm currently researching hardware components for some kind of information terminal we're building. This application of ours makes use of three output screens: (1) A touch screen where all user input is made; (2) A regular LCD monitor where the requested information is being displayed; and (3) A projector which displays exactly the same signal as screen (2) does. (All screens will run at the same resolution of 1024x768 btw.) Now I figured that using a dual-head video card would be sufficient, let's say a Matrox P690 low-profile PCI card. This would involve having a Y cable connected to the graphics card itself, then two DVI-to-VGA adapters at each end of the Y cable, and then having a VGA splitter on one of the VGA outputs. The following shows the setup in question: 0--1---------2-> VGA (DSUB-15) \ \ ----2-3---------> VGA (DSUB-15) \ \ -----------------> VGA (DSUB-15) 0: graphics card (LFH60 jack) 1: LFH60 to DVI-I dual monitor Y cable 2: DVI-to-VGA adapters 3: VGA splitter cable Question(s): Will this work? I'm particularly concerned about the following points: Can a low-profile PCI video card output a signal which is strong enough for three monitors (even if it's a dual-head card)? Does the combination of so many adapters and splitter cables work? (The LFH-to-DVI cable comes with the video card) Will the VGA splitter cable degrade the signal on the output screen & projector significantly? (If so, would a USB-powered splitter cable remedy this problem?) I can't possibly expect anyone to answer all those questions, but any input is appreciated.

  Read the article

• radeon display driver clones monitors while using Xinerama

  - by gregmuellegger

  I'm trying to get my two Radeon HD 4770 cards working with three monitors. Xinerama works so far in the way that I have two fully working monitors were I can move windows from one to the other. My problem now is that my third monitor is a clone of my second monitor (displaying the exact same thing). These monitors are connected to the same graphic card ("Screen Middle" and "Screen Right" in the xorg.conf below). Here is my xorg.conf: Section "ServerLayout" Identifier "ThreeMonitors" Screen "Screen Left" 0 0 Screen "Screen Middle" RightOf "Screen Left" Screen "Screen Right" RightOf "Screen Middle" Option "Xinerama" EndSection Section "Monitor" Identifier "Monitor Left" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Middle" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Right" Option "DPMS" EndSection Section "Device" Identifier "Device Left" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:3:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Left" Device "Device Left" Monitor "Monitor Left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Middle" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Middle" Device "Device Middle" Monitor "Monitor Middle" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Right" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:1" Screen 1 EndSection Section "Screen" Identifier "Screen Right" Device "Device Right" Monitor "Monitor Right" SubSection "Display" Depth 24 EndSubSection EndSection I'm using a fresh Kubuntu 10.10 installation with propsed-updates enabled since this repo contains a xorg fix for using multiple graphic cards. I hope someone can help me out. Very many thanks!!

  Read the article

• Good support to multiple desktops AND multiple monitors in Linux (Ubuntu)?

  - by Somebody still uses you MS-DOS

  I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminal in my Linux environment. Nowadays I have 4 worspaces: Corporate management (e-mail) and corporate messenger; Work (Documents, Requisites) Dev (Development, All gVim windows, terminal and Firefox for development) Personal (Personal stuff: personal e-mail, delicious, twitter and so on) Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea). I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example. My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. Does Linux (Ubuntu 10.04 Lucid Lynx) support this envisioned setup? If so, how?

  Read the article

• GeForce GT 430 with 1 VGA port and 1 HDMI port can support dual monitor?

  - by Tendou Kishi

  This question is similar to 3 Monitors, 1 graphics card but with different video card. It has the same ports as GT 120 in that question. Would it support dual monitor? I don't need 3 monitors. Just 2 is good. Checked GeForce GT 430 Specs but have no idea whether it will support or not. While on it, can somebody explain how to know whether a graphics card support multiple display from such information?

  Read the article

• Teamviewer: cannot control monitor 1, but can control monitor 2

  - by DaveT

  I'm using the web client of Teamviewer from my work computer trying to control my home computer. I have 2 monitors on the remote desktop, but for some reason only have control on the second monitor. When I switch to the main monitor (monitor 1), I cannot do anything and cannot even move the cursor. But I have no issues when I switch over to the second monitor (monitor 2). I used to have no issues with either, but in the past couple of months this has been causing me issues. Anyone have a suggestion? Thanks!! Also... Here is the log from the Teamviewer session. Showing me switching back and forth between the monitors. (just in case this will help). I had to remove the links in order to post the log since I don't have enough reputation points, but they were just teamviewer login weblinks. =============================================================================== 21.08 16:00:41,176: Version: 9.0.15099 21.08 16:00:41,177: Sandbox: remote 21.08 16:00:41,177: SysLanguage: en 21.08 16:00:41,177: VarLanguage: en 21.08 16:00:41,177: Flash Player: PlugIn (WIN 14,0,0,179) 21.08 16:00:41,178: UseLanguage: en 21.08 16:00:41,178: UseLanguage: en 21.08 16:00:41,182: TeamViewer hasPassword: true 21.08 16:00:41,418: ExternalConnect id=910035824 21.08 16:00:41,419: CT connect 910035824 masterURL: , sandbox = remote 21.08 16:00:41,425: MC.requestRoute(910035824) 21.08 16:00:41,426: MC.sendMasterCommand text=F=RequestRoute2&ID1=777&Client=TV& ID2=910035824&SA_AccountID=26641022&SA_PasswordMD5HashBase64Encoded=& SA_SessionSecret=f7H6Z7SYfX5ahQ7SJq/r/K20PBYg9fOZhp+DKLhf5ts=&SA_SessionID=1558929948& V=9.0.15099&OS=Flash 21.08 16:00:41,426: MC wait for ping completion 21.08 16:00:42,064: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:42,182: PingThread: TCP-Ping ok 21.08 16:00:42,183: MC.socket mode = TCP, MasterURL: 21.08 16:00:42,183: MC.connect: 21.08 16:00:43,058: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,058: MC.connectHandler: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,236: MC.requestRouteResponse: [email protected]_10800_128000_762319420_910035824_10000__1_0_16778176_128000_16778176: 128000;2147483647:1280000;4:640000_786297_786297 21.08 16:00:43,239: CT init socket: TCP 21.08 16:00:43,513: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,514: CT.connectHandler: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,519: Browser name: Netscape 21.08 16:00:43,936: CMD_IDENTIFY id=910035824 ver=2.41 21.08 16:00:44,666: CMD_CONFIRMENCRYPTION: encryption confirmed 21.08 16:00:44,667: Started resendrequest timer 21.08 16:00:45,063: Remote Version: TV 009.000 21.08 16:00:45,501: start classic authentication 21.08 16:00:45,502: Login::SendRequestToConsole(): url= 21.08 16:00:45,828: start srp authentication 21.08 16:00:46,983: checkFirstPacket ok, m_LastReceivedPacketID =4 21.08 16:00:47,148: Login::SendRequestToConsole(): url= 21.08 16:00:47,478: start srp authentication 21.08 16:00:48,210: Login::SendRequestToConsole(): url= 21.08 16:00:48,485: checkFirstPacket ok, m_LastReceivedPacketID =7 21.08 16:00:48,780: TVCmdAuthenticate_Authenticated: 1 21.08 16:00:49,321: Connected to 910035824, name=NEWMAN, os=14, version=9.0.31064 21.08 16:00:49,329: ConnectionAccessSettings: RemoteControl: AllowedFileTransfer: AllowedControlRemoteTV: AllowedSwitchSides: DeniedAllowDisableRemoteInput: AllowedAllowVPN: AllowedAllowPartnerViewDesktop: Allowed 21.08 16:00:52,195: unexpected TVCommand.CommandType == 56 21.08 16:00:52,231: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:00:52,301: Caching active, version=2 21.08 16:03:47,158: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:04:24,447: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:04:40,609: CW received display params: 3360x1050x8 monitors: 2 (active:-1) 21.08 16:04:59,802: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:04:59,933: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:05:58,419: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:06:36,824: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:07:07,232: CW received display params: 1680x1050x8 monitors: 2 (active:0)

  Read the article

• SQL - Rank() on a table

  - by Abhi

  create table v (mydate,value) as select to_date('20/03/2010 00','dd/mm/yyyy HH24'),98 from dual union all select to_date('20/03/2010 01','dd/mm/yyyy HH24'),124 from dual union all select to_date('20/03/2010 02','dd/mm/yyyy HH24'),140 from dual union all select to_date('20/03/2010 03','dd/mm/yyyy HH24'),138 from dual union all select to_date('20/03/2010 04','dd/mm/yyyy HH24'),416 from dual union all select to_date('20/03/2010 05','dd/mm/yyyy HH24'),196 from dual union all select to_date('20/03/2010 06','dd/mm/yyyy HH24'),246 from dual union all select to_date('20/03/2010 07','dd/mm/yyyy HH24'),176 from dual union all select to_date('20/03/2010 08','dd/mm/yyyy HH24'),124 from dual union all select to_date('20/03/2010 09','dd/mm/yyyy HH24'),128 from dual union all select to_date('20/03/2010 10','dd/mm/yyyy HH24'),32010 from dual union all select to_date('20/03/2010 11','dd/mm/yyyy HH24'),384 from dual union all select to_date('20/03/2010 12','dd/mm/yyyy HH24'),368 from dual union all select to_date('20/03/2010 13','dd/mm/yyyy HH24'),392 from dual union all select to_date('20/03/2010 14','dd/mm/yyyy HH24'),374 from dual union all select to_date('20/03/2010 15','dd/mm/yyyy HH24'),350 from dual union all select to_date('20/03/2010 16','dd/mm/yyyy HH24'),248 from dual union all select to_date('20/03/2010 17','dd/mm/yyyy HH24'),396 from dual union all select to_date('20/03/2010 18','dd/mm/yyyy HH24'),388 from dual union all select to_date('20/03/2010 19','dd/mm/yyyy HH24'),360 from dual union all select to_date('20/03/2010 20','dd/mm/yyyy HH24'),194 from dual union all select to_date('20/03/2010 21','dd/mm/yyyy HH24'),234 from dual union all select to_date('20/03/2010 22','dd/mm/yyyy HH24'),328 from dual union all select to_date('20/03/2010 23','dd/mm/yyyy HH24'),216 from dual From this table, how to rank() over 'value', partitioning by each hour of the day? and select only the 1st ranked result?

  Read the article

• Is there a good dual monitor arm solution for iMac 27" i7s?

  - by Darren Newton

  I currently have an iMac 27" and am considering purchasing another to run in target display mode. My desk space is a little limited. Is there a dual monitor arm solution that can support the weight of two iMac 27" units (30.5 pounds (13.8 kg)) as well as their width (25.6 inches (65.0 cm)) in a side-by-side landscape configuration? I looked at the Ergotron LX Dual Side by Side but the iMacs appear to exceed the width and weight limit this device is rated for. I'm open to alternate solutions to arms, such as a multi-unit desk stand/mount, but a wall mount is not possible for me at this time. Thanks!

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >