Search Results

Search found 1129 results on 46 pages for 'led'.

Page 20/46 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• spurious hardware memory 'errors' on hp dl380 g5's being generated

  - by friedchicken

  Hi All, i've got 2 new HP dl380g5 servers running HP's esxi4 patched to 219382. they have both been patched up to the latest hp firmware levels (firmware cd 8.7) both are running 32gb (4 x 8gb sticks) both servers are showing the same symptoms - the memory lights come on for two (random) dimms on the front of the server and the health led turns red. sometimes the server stays up and running with no problems. othertimes the server locks dead and only a power reset can bring it back. there is nothing showing in the ilo logs and nothing within the vmware hardware monitoring. the memory has been replaced i've got other customers that have been running dl380g5's with out any issues on esx3.5 - this is our first vsphere deployment with them. these are meant to go live soon so any advice would be great. thanks in advance.

  Read the article

• Asus Eee replacement netbook monitor doesn't fit connector

  - by Michael Morisy

  I bought a replacement screen for an Asus Eee netbook 1005HA from a company that said the screen they were selling was compatible, but the connector on the replacement is smaller than the original. I've scoured the net for instructions, but so far, I'm out of luck. As far as I can tell, they both have 32 pins, but maybe I'm missing a connector? The replacement is a [LG Philips 10.1 inchs Glossy LED Panel Screen][1]. Picture of two connectors I couldn't include due to low rep. The replacement is on the left.

  Read the article

• Frame rate upsampling codec/player/software?

  - by djechelon

  Hello, I recently noticed that when I play both HD and SD videos on my HDMI TV at 1080p 60Hz from my computer, the motion is not fluid as I would expect. As far as I know, it could be because the 24fps video needs to be upsampled by the codec to match the 60Hz output of the monitor. But, as far as I know, the upsampling is done by simply repeating each photogram for a certain amount of frames. I usually play MKV videos with VLC. Do you know if there is a player or codec that performs the upsampling by interpolation like some 100Hz TVs do? I recently saw an LG led TV play a 24fps 720p video at 100Hz with an incredible motion fluidity, and I simply wonder why can't my computer do! I have an NVidia card. Does PureVideo help? I'm a noob with these things. Thank you.

  Read the article

• Messages Disappeared from Outlook Sent Folder

  - by Bryan

  Two days ago almost all of the messages in my Microsoft Outlook sent folder disappeared. I say "almost all" because only the messages from the past 2 weeks remain. This led me to believe that they must have been "auto archived," but I can't find an archive file that contains my messages. I've checked the folder where Outlook says it archives messages, but there's not much there. I've changed my settings to prevent Outlook from auto-archiving my messages in the future, but still need the ones that have disappeared. Can anybody help me find my missing messages?

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• Windows XP freezes completely

  - by Max

  Lately my Win XP SP3 started to make problems. From time to time it freezes completely. Which means that the system does not react to mouse and keyboard. Keyboard led indicators also do not react to CAPS-, SCROLL-, NUM- LOCK keys. The problem is that I don't understand what causes this behavior and it seems to happen randomly. System event log also does not contain any clues. I'm thinking this could be some driver/hardware problem, but I don't know which. Are there any tools that would help me figure out the cause of this problem? Does anybody have any clue how can I fix this?

  Read the article

• USB port causing device problems after new motherboard upgrade

  - by enbuyukfener

  I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

  Read the article

• Keyboard not responding during boot

  - by Peri

  My keyboard just stopped responding during boot. So I cannot go to BIOS or select system which I want to start. It is USB keyboard and it was working before. I borrowed PS2 keyboard and it also isn't working during boot. Lately I have been having problems with hard disk. Once every 2-5 minutes LED was on for 30 seconds and win7 wasn't responsive. I connected disk to another controller on motherboard and seems it is working now. All that suggests that to me that that motherboard is broken. What can I check? Or maybe you have some other suggestions?

  Read the article

• RAID setup for maximizing data retention and read speed

  - by cat pants

  My goals are simple: maximize data retention safety, and maximize read speeds. My first instinct is to do a a three drive software RAID 1. I have only used fakeraid RAID 1 in the past and it was terrible (would have led to data loss actually if it weren't for backups) Would you say software raid 1 or a cheap actual hardware raid card? OS will be linux. Could I start with a two drive raid 1 and add a third drive on the fly? Can I hot swap? Can I pull one of the drives and throw it into a new machine and be able to read all the data? I do not want a situation where I have a raid card fail and have to try and find the same chipset in order to read my data (which i am assuming can happen) Please clarify any points on which it sounds like I have no idea what I am talking about, as I am admittedly inexperienced here. (My hardest lesson was fakeraid lol) Thanks!

  Read the article

• Error 5A - Internal CPU Error

  - by Mitch

  So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

  Read the article

• Windows 7 extremely long startup

  - by Tyler

  Windows 7 before it even gets to login. On the "starting windows" splash screen takes no less than 15 minutes to finish more like 25 minutes most times. During this time the hard drive activity led indicator is blinking maybe once every 20 seconds. When I finally get to the desktop everything runs normally. I have unplugged all peripherals with same result. Ideas? It's 32bit. 4gig memory. Fast CPU which I can't recall off the top of my head.

  Read the article

• It takes a long time until windows xp recognize I connected USB diks

  - by Pavol G

  Hello IT guys, I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognized it and show it as a new disk. I can also see (disk's LED is blinking) that something is scaning the disk when I connect it, when this is done Windows imediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using spybot), also run windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Thanks a lot for every advice!

  Read the article

• HP Pavillion dv6 laptop - 15 beeps on startup and a black screen?

  - by dunc

  Usual story - girlfriend's step-brother's laptop is broken. I don't know a huge amount about what occurred before it broke, but I do know the following: When you try to turn the laptop on, it beeps 15 times exactly. The screen remains black. The LED on the Caps Lock key flashes continuously. If left on, the laptop never boots - as far as I can see. If left on, on a stable surface with decent ventilation for a relatively short period of time, the laptop (below keyboard, but not where the RAM/HDD are) gets very hot. I've tried doing what most websites appear to recommend for similar problems, which is to disconnect AC and battery then hold the power button down for a minute before reconnecting the AC and trying to turn the laptop on - no difference. EDIT I've also tried re-seating the RAM, to no avail. Any ideas? Thanks in advance,

  Read the article

• How to fix Ubuntu 10.10 black screen from terminal?

  - by none

  I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously. Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks). I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots. So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Motherboard not recognizing memory anymore

  - by root

  I bought some new RAM and installed it on my motherboard. But, the BIOS would not post. There's an LED on my motherboard that shows error codes, and it showed the error: No usable memory detected. So, I removed the new memory and reinstalled the old memory, thus restoring the computer back to its original configuration. But, the BIOS still would not post, still giving the error: No usable memory detected. I've ensured that the memory and power headers are seated properly. I've tried all possible combinations of memory slots, and I've also reset the CMOS, but the error remains the same. The computer was working fine before I tried upgrading the memory, and I originally assembled the computer myself. What are some possible causes of this problem?

  Read the article

• What is excessive swapping.

  - by amateur barista

  This post led me to ask that question. Cache contention On a large site, if you are using MyISAM, contention occurs in the database tables when the cache is forced to clear after a node or a comment is added. With tens of thousands of filter text snippets needing to be deleted, the table will be locked for a long period, and any accesses to it will be queued pending the purge of the data in it. The same is true for the page cache as well. This often causes a "site hang" for a minute or two. During that time new requests keep piling up, and if you do not have the MaxClients parameter in Apache setup correctly, the system can go into thrashing because of excessive swapping.

  Read the article

• Asus Z8NA-D6, not powering up/no signal for monitor

  - by s093294

  I have a Asus Z8NA-D6 motherboard. Been running fine so far with one E5504 Xeon processor. I have added another Xeon E5504 CPU to the second slot and it will not power up (or there is no signal to the monitor). The status lights turn on as normal. no error led. Nothing happens other then the leds start and both cpus/fans power up. HDD power up. I tried clearing CMOS. Any sugestions? http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6/#download Update. Removing ram for second cpu makes it boot atleast. itboots with memory pluged in for cpu 1. (2 4gb modules) when addin one more to the second cpu it still boots but bios only see the 2 blocks at cpu 1)

  Read the article

• Blank screen on laptop after replacement

  - by Mark

  I have an Acer Aspire 5332 laptop, running Windows 7 home premium 32bit. My screen broke, but the particular screen (LED) are no longer made so I bought a CCFL one with a new converter which has proven to be compatible according to the supplier. When I first booted the screen went blank just after the Windows logo was displayed. I suspected a driver issue, so booted in safe mode without any problems, disabled the display adapter (Intel 4 series express family) and it booted up fine. So I guess the screen is not compatible with the display adapter. The driver version is 8.15.10.1892. I tried updating from the Intel site, but it saying it cannot (something to do with manufacturer specific). The supplier is not willing to take it back, so I'm down £60 (UK). I can use it with the adapter disabled, but the quality is bad and I cannnot play video, etc. Any help appreciated.

  Read the article

• Controlling TV Channel Through Computer

  - by killianmcc

  I'm passing my TV input through my computer so that I can use the video stream in an application I'm creating which then outputs to my TV. E.g. Sky Digibox/FreeView box - Laptop - TV Where on my laptop I'll be using the stream in a WPF application so I can overlay XAML objects onto it. My question is, what would be the best way for me to send the signal back to the box to say change the channel for example? I don't want to have to use the remote, I want the computer to handle everything. Is there a standard cable these boxes have that could take what would normally be a remote control signal and use that as input instead? Or would I have to go down the route of looking at some sort of Infared LED to send the signal recreating the remote? Apologies if this is not clear enough, let me know and I'll try and be more precise.

  Read the article

• Why my USB mouse get suspended after 3 seconds of inactivity?

  - by Vi.

  Mouse's bottom LED goes off after 3 seconds after connection and cursor movements and wheel stops. Pressing any button, reconnecting or resetting USB device resumes it for another 3 seconds (when resumed by pressing button, this event does no go to X). This happens when using any of USB ports. This mouse works well with other computer with Linux. It was working well before. Why can it happen? How to fix it? Update: It happens only if laptop is on battery. Answer: this is caused by powersaving done by laptop-mode-tools. To temporary turn off powersaving one can use for i in /sys/bus/usb/devices/*/power/control; do echo on > $i; done

  Read the article

• How do I copy ACLs on Mac OS X?

  - by MagerValp

  Most unix derivates can copy ACLs from one file to another with: getfacl filename1 | setfacl -f - filename2 Unfortunately Mac OS X does not have the getfacl and setfacl commands, as they have rolled ACL handling into chmod. chmod -E accepts a list of ACLs on stdin, but I haven't found a command that will spit out ACLs in a suitable format on stdout. The best I have come up with is: ls -led filename1 | tail +2 | sed 's/^ *[0-9][0-9]*: *//' | chmod -E filename2 Is there a more robust solution? Bonus question: is there a nice way to do it in Python, without using any modules that aren't shipped with 10.6?

  Read the article

• Disappearing mouse cursor in Word, Notepad, Outlook

  - by user161548

  I purchased a lenovo led monitor as a second monitor so I have dual screens now. Everything works great except all text programs make my cursor disappear on the new monitor. Everything works great on the old monitor but if I drag a text document to the new screen the cursor is invisible. Any ideas on what to try? Odd to me that it works on one and not the other so assuming it has something to do with the monitor but none of the settings seem to make a difference.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >