Search Results

Search found 1167 results on 47 pages for 'modem'.

Page 20/47 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • How to troubleshoot intermittent and irregular connection errors on home network (preferrably Mac client)

    - by Martin
    Hi, I'm experiencing intermittent connection errors in our home network from two different computers, normally "Connection Reset" when browsing, but also other issues such as very slow throughput. I have approximately a network setup as below: ISP-Cable Modem-Dlink DIR 655 Router-(Ethernet)-Fon Router-Mac/Windows laptop Basically, is there a simple way to monitor the network and detect where issues are coming from? Right now we don't know if it is the Fon router, the Dlink router, the modem or the ISP. As the issue is intermittent, is there a software that regularly traceroutes a set of destinations and tests e.g. throughput, something that can help us figure out where in the chain the errors are introduced? The more automatic network monitor, the better.

    Read the article

  • When connected through a router, a new gateway appears, and I lose my internet connection.

    - by idan315
    I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. (Just to be clear: the computer using Windows XP can connect to the internet without any problem). This entire question is about the PC using Windows 7. The only symptom of this problem is that when I see my network devices, in addition to my router (which appears as "Network 4", or something of the sort), I also see an "Unidentified Network". When using ipconfig to check the problem, I see a second gateway, with the IP 0.0.0.0, in addition to the IP of my router.

    Read the article

  • usb device in dual mode on gentoo linux

    - by Idlecool
    i am having a flip flop usb modem which has two modes 1 usb mass storage mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fff5 ONDA Communication S.p.A. 2 usbserial mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fffe ONDA Communication S.p.A. by default whenever i plug the modem to the usb port.. the linux machine recognize it as a usb mass storage device.. how can i make it load as usbserial device i have been using a package usb_modeswitch in the past on ubuntu 10.04 but i cannt install the same package on gentoo live cd.. even udev is not installed on live cd.. how to change the product-id of the usb device on gentoo live disc without udev.

    Read the article

  • iPhone always assigned wrong ip

    - by Ashley Ray
    for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

    Read the article

  • Does Cisco anyconnect replace original network connection session?

    - by Stan
    When using Cisco anyconnect VPN, it seems the existing network connection is still going through old connection session (Is there any way to find out)? The reason is because when using Cisco VPN client connect to gateway, usually the Messenger Live, Skype will be disconnected and requires to reconnect. But using anyconnect doesn't need to reconnect. So I am guessing if those old sessions still go through original network connection. Which means, both connection is existing at the same time. Take my case for example: connection 1: wireless NIC - cable modem - my cable ISP - internet connection 2: anyconnect - wireless NIC - cable modem - my cable ISP - VPN gateway - internet Am I correct? Is there any way to check this? Thanks.

    Read the article

  • Port forwarding not working properly

    - by sudo work
    I'm trying to host a small web server from my home network; however, I have not been able to successfully port forward ports to the local server. My current network topology looks like this: Cable Modem/Router - Secondary Wireless Router - Many computers (including server) The modem/router I'm using is a Cisco (Scientific Atlantic) DPC2100, provided by my ISP. The wireless router that I'm using as the central hub to my home network is a Linksys E3000. The computer being used as a server is running Ubuntu 10.04 Server Edition. The main issue is that I can't access the server remotely, using my WAN IP address. I have port forwarded my wireless router; however, I believe that I need to somehow set my modem to bridge mode. As far as I can tell though, this isn't possible. Here are the various IP address settings: DPC2100 WAN: 69.xxx.xxx.xxx Internal IP: 192.168.100.1 Internal Network: 192.168.7.0 E3000 IP Address: 192.168.7.2 Gateway: 192.168.7.1 Internal IP: 192.168.1.1 Internal Network: 192.168.1.0 Server IP Address: 192.168.1.123 Gateway: 192.168.1.1 Now I can do an nmap at various nodes, and here are the results (from the server): nmap localhost: 22,25,53,80,110,139,143,445,631,993,995,3306,5432,8080 open nmap 192.168.7.2: 22,25,80 (filtered),110,139,445 open (ports I have forwarded in the E3000)* nmap 69.xxx.xxx.xxx: 1720 open *For some reason, I can SSH into the server at 192.168.7.2, but not view the website. Here are also some other settings: /etc/hosts/ 127.0.0.1 localhost 127.0.1.1 servername ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/apache2/sites-available/default snippet <VirtualHost *:80> DocumentRoot /srv/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> ... </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> ... </Directory> ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> ... </Directory> </VirtualHost> Let me know if you need any other information; some stuff probably slipped my mind.

    Read the article

  • No Internet for Created VLan on Cisco CE500

    - by Jennifer
    I'm new here and also with networking but i can't set internet conection for some vlan created. I have a Cisco CE500 switch and created 4 vlans define by the roles in the switch. Vlan 2: Servers (role) (port 3-4) Vlan 3: Desktop (role) (port 5-8) Vlan 4: Guest (role) (port 9-12) Vlan 1 is default, Connect to the ADSL Modem/Router Port 2 assign to the Router Role (vlan 1) The switch is connected on port2 the ADSL Modem (DHCP) 192.168.2.254 The goal is: All Vlan should have internet connection. Vlan 2 and 3 should see each other but not Vlan 4 I can enter the switch CLI but dont know which command to enter. Thanks 4 ur time and replies Jennifer

    Read the article

  • Laptop connecting to Wifi but not to internet

    - by eddard stark
    My friends laptop is able to connect to the wifi router . Typing 192.168.1.1 in the browser shows the login page for the router . But he cannot connect to the internet. This is true on both windows and linux (dual booting setup) . There are 3 other laptops connecting to the internet via wifi just fine and his was fine too until this happened all of a sudden . I tried doing a tracert from windows to an external ip . The first hop to the modem is fine but then the packets seem to be getting dropped . If his wifi adapter is damaged how is it connecting to the modem via wifi . I havent asked a question here before but this is really weird . If anyone needs any more information I shall post it here.

    Read the article

  • Will I have internet connection issues next day, if I unplug router at night?

    - by headskracher77
    I did this regularly a few years ago and used to feel like I was 'being punished' by the Interent svc provider for disabling access to my computer, because trying to re-connect the next day became a constant pain. I have the same linksys router, a comcast modem, and hi-speed broadband through their LAN. Question: who or what is at fault for lousy internet connections, slow connections, or no connections: (everybody's tech dept. blames everybody else) The router? 10 year olds, maybe obsolete? The modem? came with the service plan - can connect three devices on a sharedconnection. The ISP: I read they not only even control and completely regulate bandwidth usage, but they also ration it!! (true?) So can I safely 'pull the plug' each night for security or not? thnx

    Read the article

  • Choosing a home network layout

    - by James M.
    I have a server, 4 PC's, a network printer, a switch and an ADSL modem. Currently the server runs Red Hat 9 and sits between the internet and the other PCs like in http://upload.wikimedia.org/wikipedia/en/1/12/Sample-network-diagram.png I have bought a new server PC to replace the old one, and I plan to install Fedora Core linux on it. The server acts as web and file server. The PCs all run Windows. Alternatively, I could connect the new server and all PCs to the switch, and connect the switch to the modem. (Sorry, couldn't find an image.) What are the pros and cons of these network layouts? Eg. in terms of reliability, security and flexibility? I am not a Linux guru but know of (and am not afraid of) iptables, dhcpd et al. Thank you for any tips, pointers and links.

    Read the article

  • How to analyze a wifi network with many devices

    - by Caveatrob
    My friend has a wifi network with an x-box, a wii, a playstation, and two nintendo portables. She's also got 2-3 PC's and a network printer. She's got a wifi repeater as well. She claims that she didn't have any issues for months with everything working together, and suddenly everything stopped disconnecting. I haven't been over there yet - wanted to figure out the best way to diagnose the thing. I asked her to send me the stats on the booster and the modem, etc: The booster is Netgear serial #2ac2195506b95 The modem is Cisco Linksys e1500 #10910c12129103 We have a sprint router thru centurylink and they said it is working fine 660 series

    Read the article

  • Connecting a print/file server with no wired access

    - by PeanutsMonkey
    We currently have a printer server which also serves as a file server. The server is located on premise however is not close to any wired access point i.e. a patch panel or point. The server also requires access to the Internet as it transmits files across. We have a wireless modem and a wireless router. I can run a cable between the server and wireless router. How can I have the wireless router communicate with the wireless modem? If the operating system of the server is concerned, it is running Windows Server 2003.

    Read the article

  • Troubleshooting a slow database server with no load

    - by user1721724
    I'm getting ready to soft launch my website and I've run into some problems with what I think is being caused by my MySQL database running on Fedora. All websites run fine, just as I'd expect, but any pages that establish a database connection hang until the connection is established, and then bang, the site loads as it should. Ex. My landing page (http://www.thrusong.com) doesn't make a database connection and loads quickly. User profile pages (http://www.thrusong.com/john) make a database connection and load slowly, even though most of the data comes from memcached and the database currently has no load on it. This problem just came up yesterday when my router died and I began using my Pace 2Wire modem with built-in router. Before, my old router was set to handle everything. My ISP says the settings in the modem are correct. Any ideas? Thanks in advance.

    Read the article

  • How can I join two simple home networks together using an ethernet cable?

    - by Ilia Jerebtsov
    I want to join two different home networks together like so: PC A1 PC A2 PC B1 PC B2 \ / \ / Gateway A <----- ethr. cable -----> Gateway B | | ADSL modem A ADSL modem B Both networks are of the basic residential type with identical configuration, with all PCs running Vista/7. The point is to temporarily join two apartments in a building for gaming and file sharing, and the holy grail would be: PCs on network A can access PCs on network B and vice-versa (file shares and gaming). Each network uses its own internet connection. Data between networks shouldn't take a trip through the internet (broadband upload speeds are severely capped) A network's internet access should continue working if the joining cable is disconnected with minimal configuration changes. How closely can this be achieved?

    Read the article

  • Network router and switch configuration

    - by gilly3
    Can I put a switch before my router in my home network? Here is a diagram of how I want to set up my network: ________________________________ ________________________________________ | | | | | Cable Access Panel | | Home Office | | _____________ ________ | | _____________ | | | | | | | | | | _________ | | | Cable Modem |--->| Switch |-------------->| Router |____| | | | |_____________| |________| | | |_____________| | Printer | | |______________________/____\____| | / | \ |_________| | ___/_ _\___ | _____/ ____|____ \_____ | | | | | | | | | | | | | | PC1 | | PC2 | | | PC3 | | Ext. HD | | PC4 | | |_____| |_____| | |_____| |_________| |_____| | |________________________________________| The reason I want to do this is because my router is also my wireless access point. My cable modem is located in the far corner of my home where my phone/tv/network access panel is. I'd rather keep the wireless access point in a more central location, but I'm not sure if DHCP will continue to work properly with that configuration. Edit: I'd like to continue to be able to share files and access my networked drive and printer from each computer in the house.

    Read the article

  • Attempt to connect to wireless internet at home and i am asked for User Credentals, nothing I enter works

    - by lucig12
    I just got a new modem and am trying to connect my windows 7 desktop to the new wireless connection. I had no issues on the three previous connections I have used, but for some reason when I click on the icon for Wireless Network Connections, click on my network, it asks for User Credentials. Nothing I type in works. I have tried saving credentials in credentials manager, using my login info, using the network's login info, recreating the network manually, plugging and unplugging my modem, literally every solution on every forum for similar issues. I have no idea what to do now. any ideas?

    Read the article

  • How to configure something like "Reflexive ACL" on OpenBSD?

    - by Earlz
    My U-Verse modem has something called "Reflexive ACL" described as Reflexive ACL: When IPv6 is enabled, you can enable Reflexive Access Control Lists to deny inbound IPv6 traffic unless this traffic results from returning outgoing packets (except as configured through firewall rules). This seems like a pretty good way to keep from having to maintain a firewall on each computer behind my router that gets handed an IPv6 address. It sounds about like a NAT, which for my small home network is all I want right now. Now my modem sucks as a router though, so I'm in the process of configuring an OpenBSD router to do that. I've got IPv6 supported and all that and my OpenBSD router will hand out IPv6 addresses by rtadvd. Now I want to keep people from having instant access to my local network through IPv6. How would I best do something like Reflexive ACL with pf in OpenBSD 5.0?

    Read the article

  • Serial Port ttyUSB0

    - by Alex
    I picked up a USB serial null modem cable, so that I can connect up to a headless linux box. As a quick test, I plugged the device into the usb null modem, and the other end I connected to a windows pc. I opened up a terminal on the windows side, with 115200 8N1. On the linux side I opened minicom with the same params. MY problem is that I can type one way from the pc and see the text on the linux minicom side. If I type on the linux side it doesnt show on the pc side. If I reverse the cable it reverses the process. I bet this is a simple issue but I haven't dealt with serial comms in ages. Thanks

    Read the article

  • Sharing a printer on Windows home network

    - by Jeff
    I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

    Read the article

  • Sharing a printer on Windows home network

    - by Jeff
    I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

    Read the article

  • Arch Linux doesn't mount two USB drive?

    - by unixbhaskar
    One is USB modem which is connected and working and problematic one is a plain vfat USB stick which contain data ....that is the fellow not mounting :( I have tried to see it by fdisk ....it doesn't mount autometically... Is there any UDEV rule for that?? Because I have put a udev rule to remove the usb-storage thing( I had to.. otherwise the usb modem wont get connected... it waits for storage to relase the port) Any idea and solution would be greatly appreciated PS: I am running Arch distribution. Thanks

    Read the article

  • Sharing Internet over Wireless Router

    - by Alandt
    I have a very strange question today - how do I share my dial up internet (yeah I know you are gonna say that is slow but broadband internet isn't available in my area), so dial up and 3G connection is all I got. I also have a Vodafone USB 3G modem that picks up 3G network, I am planning to use my Vodafone 3G modem in the day since I have free dial up internet from 7:00 pm in the night untill 7am the next morning. Some additional details: * My PC is running Windows XP Professional SP3 * I have a Sitecom Wireless Router 150N X1 WLR- 1000 I would appreciate it if anyone can provide me with a step-by-step guide! Thanks

    Read the article

  • How to run long time process on Udev event?

    - by neclude
    (sorry for my bad english) I want run ppp connection when my usb modem is connect. so i use next udev rule: ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="16d8",\ RUN+="/usr/local/bin/newPPP.sh $env{DEVNAME}" (my modem appear in /dev as ttyACM0) newPPP.sh: #!/bin/bash /usr/bin/pon prov $1 >/dev/null 2>&1 & Problem: udev event fire, newPPP.sh running, BUT newPPP.sh process will be killed after ~4-5s. ppp not have time to connect. (in it params is timeout 10s for dial up). How can i run long time process, that will not be killed? (I was try nohup. It don't work too.) System: Arch Linux

    Read the article

  • Lighttpd based server issues crop up when port forwarding

    - by michael
    I have four host computers running lighttpd webservers. they are sitting behind a hspa modem, which each occupying a http port between [81 - 84]. 80 is taken by the modem itself. The port forwarding is setup correctly, however, only a portion of any webpage I request from any of the hosts comes through (they all fails after %20 of the page). If I put the host on port 81 into the dmz, it serves pages fine. The others do not respond to the dmz treatment. Is it possible the web content on the hosts somehow require ports aside from their respective http port? Or is it possible that even though the server.port in the lighttpd_ssl.conf file is set, the individual hosts are still expecting to serve on port 80? I am not familiar with lighttpd, nor did i set them up. they are running on video encoders i purchased. I can grab any files from them required for further information on the problem.

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >