Search Results

Search found 753 results on 31 pages for 'perlin noise'.

Page 20/31 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

    - by Kristin
    I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

    Read the article

  • Is it possible to remove buzzing from headphones which occurs only when scrolling / window redrawing?

    - by Billy ONeal
    Whenever a lot of drawing is happening on my laptop a buzzing noise is emitted by the sound hardware, which is clearly audible with headphones (similar to this question or this one). I've tried both the headphone jack on the laptop itself, and also on the dock. I've used other laptops and they all seem to have similar problems here, which leads me to believe this is more a function of relatively low quality laptop sound hardware than any fault with the headphones or this laptop in particular. I'm curious if there's some piece of hardware I might use to eliminate the buzzing. For instance, would an external USB sound device fix the problem or is it likely subject to the same kinds of issues? Would a simple filter/choke on the headphone cord itself possibly help? Or is one simply stuck with poor quality audio from laptops period?

    Read the article

  • Is 50% download speed on a wireless G network normal?

    - by Bartlomiej Skwira
    I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

    Read the article

  • HDMI resolution limited to 1920 x 1080?

    - by Jay Bazuzi
    Monitor is a Dell 3008wfp. Very nice. Max resolution 2560 x 1600. Video card is an ATI Radeon HD 4350. I like it because it was cheap and is fanless. (Noise bugs me.) I would like to switch from DVI to HDMI, but when I use HDMI, the resolution drops to 1920 x 1080. Do I need to change out my video card to get the full resolution? How can I pick one that will do the max resolution?

    Read the article

  • Dell Inspiron7520 and ubntu 12.04 issues

    - by user91358
    I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

    Read the article

  • How to repair Creative Inspire Speakers 2.1 Volume Control Wheel?

    - by akula
    Due to dust or so, the Volume Control Wheel does not work properly. Volume goes to one speaker, and other gets muted. Vice versa. When I carefully turn the wheel sometimes the Volume works properly or sometimes with noise or muted one side. As I write this, I've cleaned it up with Petrol drops. PCB is drying. I chose Petrol because Contact Cleaner is expensive solution. Am I correct or any other method could be used? Thank you.

    Read the article

  • Any good reason to open files in text mode?

    - by Tinctorius
    (Almost-)POSIX-compliant operating systems and Windows are known to distinguish between 'binary mode' and 'text mode' file I/O. While the former mode doesn't transform any data between the actual file or stream and the application, the latter 'translates' the contents to some standard format in a platform-specific manner: line endings are transparently translated to '\n' in C, and some platforms (CP/M, DOS and Windows) cut off a file when a byte with value 0x1A is found. These transformations seem a little useless to me. People share files between computers with different operating systems. Text mode would cause some data to be handled differently across some platforms, so when this matters, one would probably use binary mode instead. As an example: while Windows uses the sequence CR LF to end a line in text mode, UNIX text mode will not treat CR as part of the line ending sequence. Applications would have to filter that noise themselves. Older Mac versions only use CR in text mode as line endings, so neither UNIX nor Windows would understand its files. If this matters, a portable application would probably implement the parsing by itself instead of using text mode. Implementing newline interpretation in the parser might also remove some overhead of using text mode, as buffers would need to be rewritten (and possibly resized) before returning to the application, while this may be less efficient than when it would happen in the application instead. So, my question is: is there any good reason to still rely on the host OS to translate line endings and file truncation?

    Read the article

  • Is there software that can visualize all sounds from the sound card?

    - by bentsai
    I'm looking for a solution to this problem: When I'm working at my computer, sometimes I'll be using noise-isolation headphones connected to a source other than my computer (e.g., an iPod). I would like to see (this is what I mean by "visualize") some kind of notification on my screen, since I will not be able to hear the sound. Is there any software out there that would accomplish this? I'm interested in seeing any sounds that would normally come out of th sound card. This is for Windows (XP), but I'd be interested in hearing solutions for other flavors, and OS X, as well.

    Read the article

  • Twisted pair cable twists and unwanted signals issue

    - by ziaharipur
    I am confused about one point I have read the following paragraph from the networking book. “the twists in the twisted pair cable are used to avoid the unwanted signals. For example one twist, one wire is closer to the noise source and the other is farther; in the next twist the reverse is true. Twisting makes its probable that both wires are equally affected by the unwanted signal. This means that the receiver which calculate the difference between the two receives no unwanted signal.” Now ok I understood the purpose of twists but I am confused about how receiver will calculate the difference when it will receive the signal?. How unwanted signal will be eliminated ? Another thing that I want to make clear is , I am beginner please provide such an answer that can be understood.

    Read the article

  • Small WiFi Network In a Noisy Environment

    - by Sam Skuce
    My company is demoing our network enabled products at big conferences. For this purpose, we would like to be able to set up a small WiFi network in our booth with a range of less than 10 meters. We will only be connecting the device that we are demoing and the iPad or PC running our demo software. I understand that there are conferences that won't allow you to run your own WiFi equipment, but some fairly big ones do (e.g. IMTS, which we were just at). I know that the AP should be encrypted and not broadcast its SSID, but are there additional equipment considerations to deal with the high level of RF noise in such an environment? Is there a particular technology that I should be looking at?

    Read the article

  • Associate a texture to an object (from a data-model, not graphical point of view).

    - by Raveline
    I'm writing a roguelike where objects and floor can be made of different materials. For instance, let's say we can have a wooden chair, an iron chair, a golden chair, and so on. I've got an Object class (I know, the name is terrible), which is more or less using a composite pattern, and a Material class. Material have different important properties (noise, color...). For the time being, there are 5 different instances of materials, created at the initialization of the game. How would connect an instance of Object with one of the 5 instances of materials ? I see three simple solutions : Using a pointer. Simple and brutal. Using an integer material-id, then get the materials out of a table when engine manipulates the object for various purposes (display, attack analysis, etc.). Not very beautiful, I think, and not very flexible. Using an integer material-id, then get the materials out of a std::map. A bit more flexible, but still not perfect. Do you see other possibilities ? If not, what would you choose (and why) ? Thanks in advance !

    Read the article

  • Space between 2 vertices on a heightmap

    - by Sietse
    First off, I am sorry for the crazy title. I couldn't really think of something else. I am working on a hobby project, it's a infinite world generated with Perlin Noise, Java and LWJGL. But I am having a problem, it is kinda hard to explain, so I made a video: http://youtu.be/D_NUBJZ_5Kw Obviously the problem is the black spaces in between all the pieces of ground. I have no idea what is causing it. I already tried making all the values doubles instead of floats, but that didn't fix it. Here is a piece of code I am using: float height2, height = (float)getHeight(x, y); height2 = (float) ((getHeight(x-1, y+1) + height) / 2); vertexhelper.addVertexColorAndTexture(x, height2, y+1, r, g, b, a, 0f, 1f); height2 = (float) ((getHeight(x+1, y+1) + height) / 2); vertexhelper.addVertexColorAndTexture(x+1, height2, y+1, r, g, b, a, 1f, 1f); height2 = (float) ((getHeight(x+1, y-1) + height) / 2); vertexhelper.addVertexColorAndTexture(x+1, height2, y, r, g, b, a, 1f, 0f); height2 = (float) ((getHeight(x-1, y-1) + height) / 2); vertexhelper.addVertexColorAndTexture(x, height2, y, r, g, b, a, 0f, 0f); I loop through this at the initialization of a chunk with x-16 and y-16. vertexhelper is a class I made that just puts everything in a array. (I am using floats here, but that's after doing the maths, so that shouldn't be a problem) I highly appreciate you reading this.

    Read the article

  • How Expedia Made My New Bride Cry

    - by Lance Robinson
    Tweet this? Email Expedia and ask them to give me and my new wife our honeymoon? When Expedia followed up their failure with our honeymoon trip with a complete and total lack of acknowledgement of any responsibility for the problem and endless loops of explaining the issue over and over again - I swore that they would make it right. When they brought my new bride to tears, I got an immediate and endless supply of motivation. I hope you will help me make them make it right by posting our story on Twitter, Facebook, your blog, on Expedia itself, and when talking to your friends in person about their own travel plans.   If you are considering using them now for an important trip - reconsider. Short summary: We arrived early for a flight - but Expedia had made a mistake with the data they supplied to JetBlue and Emirates, which resulted in us not being able to check in (one leg of our trip was missing)!  At the time of this post, three people (myself, my wife, and an exceptionally patient JetBlue employee named Mary) each spent hours on the phone with Expedia.  I myself spent right at 3 hours (according to iPhone records), Lauren spent an hour and a half or so, and poor Mary was probably on the phone for a good 3.5 hours.  This is after 5 hours total at the airport.  If you add up our phone time, that is nearly 8 hours of phone time over a 5 hour period with little or no help, stall tactics (?), run-around, denial, shifting of blame, and holding. Details below (times are approximate): First, my wife and I were married yesterday - June 18th, the 3 year anniversary of our first date. She is awesome. She is the nicest person I have ever known, a ton of fun, absolutely beautiful in every way. Ok enough mushy - here are the dirty details. 2:30 AM - Early Check-in Attempt - we attempted to check-in for our flight online. Some sort of technology error on website, instructed to checkin at desk. 4:30 AM - Arrive at airport. Try to check-in at kiosk, get the same error. We got to the JetBlue desk at RDU International Airport, where Mary helped us. Mary discovered that the Expedia provided itinerary does not match the Expedia provided tickets. We are informed that when that happens American, JetBlue, and others that use the same software cannot check you in for the flight because. Why? Because the itinerary was missing a leg of our flight! Basically we were not shown in the system as definitely being able to make it home. Mary called Expedia and was put on hold by their automated system. 4:55 AM - Mary, myself, and my brand new bride all waited for about 25 minutes when finally I decided I would make a call myself on my iPhone while Mary was on the airport phone. In their automated system, I chose "make a new reservation", thinking they might answer a little more quickly than "customer service". Not surprisingly I was connected to an Expedia person within 1 minute. They informed me that they would have to forward me to a customer service specialist. I explained to them that we were already on hold for that and had been for nearly half an hour, that we were going on our honeymoon and that our flight would be leaving soon - could they please help us. "Yes, I will help you". I hand the phone to JetBlue Mary who explains the situation 3 or 4 times. Obviously I couldn't hear both ends of the conversation at this point, but the Expedia person explained what the problem was by stating exactly what Mary had just spent 15 minutes explaining. Mary calmly confirms that this is the problem, and asks Expedia to re-issue the itinerary. Expedia tells Mary that they'll have to transfer her to customer service. Mary asks for someone specific so that we get an answer this time, and goes on hold. Mary get's connected, explains the situation, and then Mary's connection gets terminated. 5:10 AM - Mary calls back to the Expedia automated system again, and we wait for about 5 minutes on hold this time before I pick up my iPhone and call Expedia again myself. Again I go to sales, a person picks up the phone in less than a minute. I explain the situation and let them know that we are now very close to missing our flight for our honeymoon, could they please help us. "Yes, I will help you". Again I give the phone to Mary who provides them with a call back number in case we get disconnected again and explains the situation again. More back and forth with Expedia doing nothing but repeating the same questions, Mary answering the questions with the same information she provided in the original explanation, and Expedia simply restating the problem. Mary again asks them to re-issue the itinerary, and explains that doing so will fix the problem. Expedia again repeats the problem instead of fixing it, and Mary's connection gets terminated. 5:20 AM - Mary again calls back to Expedia. My beautiful bride also calls on her own phone. At this point she is struggling to hold back her tears, stumbling through an explanation of all that has happened and that we are about to miss our flight. Please help us. "Yes, I will help". My beautiful bride's connection gets terminated. Ok, maybe this disconnection isn't an accident. We've now been disconnected 3 times on two different phones. 5:45 AM - I walk away and pleadingly beg a person to help me. They "escalate" the issue to "Rosy" (sp?) at Expedia. I go through the whole song and dance again with Rosy, who gives me the same treatment Mary was given. Rosy blames JetBlue for now having the correct data. Meanwhile Mary is on the phone with Emirates Air (the airline for the second leg of our trip), who agrees with JetBlue that Expedia's data isn't up to date. We are informed by two airport employees that issues like this with Expedia are not uncommon, and that the fix is simple. On the phone iwth Rosy, I ask her to re-issue the itinerary because we are about to miss our flight. She again explains the problem to me. At this point, I am standing at the window, pleading with Rosy to help us get to our honeymoon, watching our airplane. Then our airplane leaves without us. 6:03 AM - At this point we have missed our flight. Re-issuing the itinerary is no longer a solution. I ask Rosy to start from the beginning and work us up a new trip. She says that she cannot do that. She says that she needs to talk to JetBlue and Emirates and find out why we cannot check-in for our flight. I remind Rosy that our flight has already left - I just watched it taxi away - it no longer matters why (not to mention the fact that we already knew why, and have known why since 4:30 AM), and have known the solution since 4:30 AM. Rosy, can you please book a new trip? Yes, but it will cost $400. Excuse me? Now you can, but it will cost ME to fix your mistake? Rosy says that she can escalate the situation to her supervisor but that will take 1.5 hours. 6:15 AM - I told Rosy that if they had re-issued the itinerary as JetBlue asked (at 4:30 AM), my new wife and I might be on the airplane now instead of dealing with this on the phone and missing the beginning (and how much more?) of our honeymoon. Rosy said that it was not necessary to re-issue the itinerary. Out of curiosity, i asked Rosy if there was some financial burden on them to re-issue the itinerary. "No", said Rosy. I asked her if it was a large time burden on Expedia to re-issue the itinerary. "No", said Rosy. I directly asked Rosy: Why wouldn't Expedia have re-issued the itinerary when JetBlue asked? No answer. I asked Rosy: If you had re-issued the itinerary at 4:30, isn't it possible that I would be on that flight right now? She actually surprised me by answering "Yes" to that question. So I pointed out that it followed that Expedia was responsible for the fact that we missed out flight, and she immediately went into more about how the problem was with JetBlue - but now it was ALSO an Emirates Air problem as well. I tell Rosy to go ahead and escalate the issue again, and please call me back in that 1.5 hours (which how is about 1 hour and 10 minutes away). 6:30 AM - I start tweeting my frustration with iPhone. It's now pretty much impossible for us to make it to The Maldives by 3pm, which is the time at which we would need to arrive in order to be allowed service to the actual island where we are staying. Expedia has now given me the run-around for 2 hours, caused me to miss my flight, and worst of all caused my amazing new wife Lauren to miss our honeymoon. You think I was mad? No. Furious. Its ok to make mistakes - but to refuse to fix them and to ruin our honeymoon? No, not ok, Expedia. I swore right then that Expedia would make this right. 7:45 AM - JetBlue mary is still talking her tail off to other people in JetBlue and Emirates Air. Mary works it out so that if Expedia simply books a new trip, JetBlue and Emirates will both waive all the fees. Now we just have to convince Expedia to fix their mistake and get us on our way! Around this time Expedia Rosy calls me back! I inform her of the excellent work of JetBlue Mary - that JetBlue and Emirates both will waive the fees so Expedia can fix their mistake and get us going on our way. She says that she sees documentation of this in her system and that she needs to put me on hold "for 1 to 10 minutes" to talk to Emirates Air (why I'm not exactly sure). I say ok. 8:45 AM - After an hour on hold, Rosy comes on the line and asks me to hold more. I ask her to call me back. 9:35 AM - I put down the iPhone Twitter app and picks up the laptop. You think I made some noise with my iPhone? Heh 11:25 AM - Expedia follows me and sends a canned "We're sorry, DM us the details".  If you look at their Twitter feed, 16 out of the most recent 20 tweets are exactly the same canned response.  The other 4?  Ads.  Um - #MultiFAIL? To Expedia:  You now have had (as explained above) 8 hours of 3 different people explaining our situation, you know the email address of our Expedia account, you know my web blog, you know my Twitter address, you know my phone number.  You also know how upset you have made both me and my new bride by treating us with such a ... non caring, scripted, uncooperative, argumentative, and possibly even deceitful manner.  In the wise words of the great Kenan Thompson of SNL: "FIX IT!".  And no, I'm NOT going away until you make this right. Period. 11:45 AM - Expedia corporate office called.  The woman I spoke to was very nice and apologetic.  She listened to me tell the story again, she says she understands the problem and she is going to work to resolve it.  I don't have any details on what exactly that resolution might me, she said she will call me back in 20 minutes.  She found out about the problem via Twitter.  Thank you Twitter, and all of you who helped.  Hopefully social media will win my wife and I our honeymoon, and hopefully Expedia will encourage their customer service teams treat their customers properly. 12:22 PM - Spoke to Fran again from Expedia corporate office.  She has a flight for us tonight.  She is booking it now.  We will arrive at our honeymoon destination of beautiful Veligandu Island Resort only 1 day late.  She cannot confirm today, but she expects that Expedia will pay for the lost honeymoon night.  Thank you everyone for your help.  I will reflect more on this whole situation and confirm its resolution after our flight is 100% confirmed.  For now, I'm going to take a breather and go kiss my wonderful wife! 1:50 PM - Have not yet received the promised phone call.  We did receive an email with a new itinerary for a flight but the booking is not for specific seats, so there is no guarantee that my wife and I will be able to sit together.  With the original booking I carefully selected our seats for every segment of our trip.  I decided to call into the phone number that Fran from the Expedia corporate office gave me.  Its automated voice system identified itself as "Tier 3 Support".  I am currently still on hold with them, I have not gotten through to a human yet. 1:55 PM - Fran from Expedia called me back.  She confirmed us as booked.  She called the airlines to confirm.  Unfortunately, Expedia was unwilling or unable to allow us any type of seat selection.  It is possible that i won't get to sit next to the woman I married less than a day ago on our 40 total hours of flight time (there and back).  In addition, our seats could be the worst seats on the planes, with no reclining seat back or right next to the restroom.  Despite this fact (which in my opinion is huge), the horrible inconvenience, the hours at the airport, and the negative Internet publicity that Expedia is receiving, Expedia declined to offer us any kind of upgrade or to mark us as SFU (suitable for upgrade).  Since they didn't offer - I asked, and was rejected.  I am grateful to finally be heading in the right direction, but not only did Expedia horribly botch this job from the very beginning, they followed that botch job with near zero customer service, followed by a verbally apologetic but otherwise half-hearted resolution.  If this works out favorably for us, great.  If not - I'm not done making noise, Expedia.  You owe us, and I expect you to make it right.  You haven't quite done that yet. Thanks - Thank you to Twitter.  Thanks to all those who sympathize with us and helped us get the attention of Expedia, since three people (one of them an airline employee) using Expedia's normal channels of communication for many hours didn't help.  Thanks especially to my PowerShell and Sharepoint friends, my local friends, and those connectors who encouraged me and spread my story. 5:15 PM - Love Wins - After all this, Lauren and I are exhausted.  We both took a short nap, and when we woke up we talked about the last 24 hours.  It was a big, amazing, story-filled 24 hours.  I said that Expedia won, but Lauren said no.  She pointed out how lucky we are.  We are in love and married.  We have wonderful family and friends.  We are both hard-working successful people who love what they do.  We get to go to an amazing exotic destination for our honeymoon like Veligandu in The Maldives...  That's a lot of good.  Expedia didn't win.  This was (is) a big loss for Expedia.  It is a public blemish for all to see.  But Lauren and I did win, big time.  Expedia may not have made things right - but things are right for us.  Post in progress... I will relay any further comments (or lack of) from Expedia soon, as well as an update on confirmation of their repayment of our lost resort room rates.  I'll also post a picture of us on our honeymoon as soon as I can!

    Read the article

  • iPad MPMoviePlayerController only hearing audio, no videos!

    - by Steph Moreau
    I am currently rebuilding my app for the iPad. I would like to play the videos sourced online. I display the information and when i go to play the video all i get is the audio... No video is shown at all. My page looks exactly the same except that i have some "background" noise. These are the same videos i use on the iPhone app and they work perfectly This is the code that i call to play my videos - (IBAction) playMovie{ NSURL *url = [NSURL URLWithString:vidMovie]; MPMoviePlayerController *moviePlayer = [[MPMoviePlayerController alloc]initWithContentURL:url]; [moviePlayer play]; } I am using this on a button on the right side view of a splitViewController. I get the same result in my simulator as on an iPad. Not sure if i'm missing something, but if anyone can help it would be greatly appreciated!

    Read the article

  • Laplacian of Gaussian: how does it work? (opencv)

    - by maximus
    Does anybody know how does it work and how to do it using opencv? Laplacian can be calculated using opencv, but the result is not what I expected. I mean I expect the image to be approximately constant contrast at background regions, but it is black, and edges are white. There are a lot of noise also, even after gauss filter. I filter image using gaussian filter and then apply laplace. I think what I want is done by a different way.

    Read the article

  • Benefits of programming (doing) versus reading blogs (thinking?)

    - by Xian
    I have come to a conclusion or realization that perhaps many developers I know including myself have a fanatical fascination with reading as many programming and technology blogs or listening to podcasts as humanly possible. I sometimes wonder if this time would be much better spent in actual coding and doing, rather than the incessant thinking and perhaps wondering what the "other guy" is doing? With a very large signal to noise ratio in most blogs and podcasts, is there real benefit in maintaining a huge and constant blog role.. or is this some primal fear or instinct to keep up the pace unless being left behind? Can they simply be relegated to Google search and just-in-time learning? Edit: (There are some amazing answers here and touch a philosophical nerve with me, if you are reading this for the first time, I recommend taking the time reading through the answers below)

    Read the article

  • Looking for programs on audio tape/cassette containing programs for Sinclair Z80 PC?

    - by DVK
    OK, so back before ice age, I recall having a Sinclair ZX80 PC (with TV as a display, and a cassette tape player as storage device). Obviously, the programs on cassette tapes made a very distinct sound (er... noise) when playing the tape... I was wondering if someone still had those tapes? The reason (and the reason this Q is programming related) is that IIRC different languages made somewhat different pitched noises, but I would like to run the tape and listen myself to confirm if that was really the case...

    Read the article

  • Looking for programs on audio tape/cassette containing programs for Sinclair ZX80 PC?

    - by DVK
    OK, so back before ice age, I recall having a Sinclair ZX80 PC (with TV as a display, and a cassette tape player as storage device). Obviously, the programs on cassette tapes made a very distinct sound (er... noise) when playing the tape... I was wondering if someone still had those tapes? The reason (and the reason this Q is programming related) is that IIRC different languages made somewhat different pitched noises, but I would like to run the tape and listen myself to confirm if that was really the case...

    Read the article

  • Arbitrary-precision random numbers in C: generation for Monte Carlo simulation without atmospheric n

    - by Yktula
    I know that there are other questions similar to this one, however the following question pertains to arbitrary-precision random number generation in C for use in Monte Carlo simulation. How can we generate good quality arbitrary-precision random numbers in C, when atmospheric noise isn't always available, without relying on disk i/o or network access that would create bottlenecks? libgmp is capable of generating random numbers, but, like other implementations of pseudo-random number generators, it requires a seed. As the manual mentions, "the system time is quite easy to guess, so if unpredictability is required then it should definitely not be the only source for the seed value." Is there a portable/ported library for generating random numbers, or seeds for random numbers? The libgmp also mentions that "On some systems there's a special device /dev/random which provides random data better suited for use as a seed." However, /dev/random and /dev/urandom can only be used on *nix systems.

    Read the article

  • Removing the image from an IKImageView

    - by Brian Postow
    I have an IKImageView that is coming up effectively un-initialized. This is happening effectively in an error-state (The user is unregistered) so I haven't had a chance to put an image in it yet. In 10.6, this comes up fine, with a black rectangle. In 10.5, however, it comes up with garbage. some rectangles of noise, some rectangles of copies of the desktop, etc. I've tried setting the ZoomFactor to 0.0, I've tried setting the image to nil, but it appears that the problem is beyond that. any ideas? (My next kludge is going to be to ship tiny blank image with the app, and try to get it to load that... but that's kind of silly)

    Read the article

  • Kink detection in drawn polylines

    - by David Rutten
    Users can sketch in my app using a very simple tool (move mouse while holding LMB). This results in a series of mousemove events and I record the cursor location at each event. The resulting polyline curve tends to be rather dense, with recorded points almost every other pixel. I'd like to smooth this pixelated polyline, but I don't want to smooth intended kinks. So how do I figure out where the kinks are? The image shows the recorded trail (red pixels) and the 'implied' shape as a human would understand it. People tend to slow down near corners, so there is usually even more noise here than on the straight bits.

    Read the article

  • Novel fitness measure for evolutionary image matching simulation

    - by Nick Johnson
    I'm sure many people have already seen demos of using genetic algorithms to generate an image that matches a sample image. You start off with noise, and gradually it comes to resemble the target image more and more closely, until you have a more-or-less exact duplicate. All of the examples I've seen, however, use a fairly straightforward pixel-by-pixel comparison, resulting in a fairly predictable 'fade in' of the final image. What I'm looking for is something more novel: A fitness measure that comes closer to what we see as 'similar' than the naive approach. I don't have a specific result in mind - I'm just looking for something more 'interesting' than the default. Suggestions?

    Read the article

  • GpsSatellite.getSnr() - What is the value range?

    - by rflexor
    I'm building a Sat-View that draws a small bar-chart for available satellites and their signal strength (or better: their signal-to-noise-ratio / SNR). The javadoc doesn't say what value-range to expect for the SNR. The NMEA-Standard says 0-99, but even in best conditions my G1 doesn't reach that value. I also read that different manufacturers use different value-ranges for the SNR, so is that true for android-devices, too? Or is there a unified value range on that plattform and if so, what is it? The lack of information in the docs leads me to suspect I just get the "raw" SNR from the driver, in which case I'd like to know: What do you think is the best approach to visualize that unknown value-range in a bar-chart?

    Read the article

  • Video Synthesis - Making waves, patterns, gradients...

    - by Nathan
    I'm writing a program to generate some wild visuals. So far I can paint each pixel with a random blue value: for (y = 0; y < YMAX; y++) { for (x = 0; x < XMAX; x++) { b = rand() % 255; setPixelColor(x,y,r,g,b); } } I'd like to do more than just make blue noise, but I'm not sure where to start (Google isn't helping me much today), so it would be great if you could share anything you know on the subject or some links to related resources.

    Read the article

  • asp.net web deployment

    - by CliffC
    i have successful created asp.net web deployment project under visual studio 2008 and everything works fine. However there is a new requirement from my user where they want to browse the location to install the web application instead of using the default install location. Is there anyway to achieve this ? or do i need to use some third party deployment tools? i have tried the sample transformation file on http://www.codeproject.com/KB/install/ChangeVDirWebSetupProject.aspx?fid=295594&fr=1&df=90&mpp=25&noise=3&sort=Position&view=Quick#xx0xx but it only seems to work under vs2005 thanks

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >