Search Results

Search found 12497 results on 500 pages for 'linked servers'.

Page 200/500 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

  • SLES AutoYaST Script Validity Verification

    - by Xerxes
    Does anyone here write their own customized AutoYaST scripts for building SLES servers? I'm not talking about generating them with yast2 autoyast. If so, have you found a way to verify the syntax? xmllint is good as far as telling you that the XML syntax is valid, but with an upto date DTD, it can't tell you anything more, and the shipped DTDs are out-of-date. I've opened a ticket with Novell on this, but who knows when and what I'll hear back.

    Read the article

  • DNS delegation on same server with DDNS and second slave server

    - by Austin
    I have two servers running BIND, the first is setup as the master of two zones and the second as a slave for those zones. The zones are example.com and ddns.example.com. I have DDNS running and thousands of device entries are dynamically created in ddns.example.com. I wanted to keep DDNS separate from the main example.com, so I created a separate zone that the DHCP servers update. Considering these zones are hosted on the same server, is it possible to have delegation working from example.com to ddns.example.com? For example if my workstation's search domain is example.com and pointed towards 10.1.10.1 for its DNS provider, I would like to be able to resolve hostname.ddns. As it is, I can resolve hostname.ddns.example.com, but would like to be able to resolve just hostname.ddns. Alternatively, if the workstation's search domain is ddns.example.com, what settings do I need to be able to change to be able to resolve web, ftp, etc, which are all hosts in the parent, example.com zone? Does the ddns.example.com zone need to forward to the example.com zone? Again, all the zones are setup on the same server with a second server setup as a slave. named.conf: zone "example.com" IN { type master; file "example.com"; allow-update { none; }; } zone "ddns.example.com" IN { type master; file "ddns.example.com"; allow-update { key dhcp-update; }; } example.com zone file: $ORIGIN . $TTL 86400 example.com IN SOA ns1.example.com. hostmaster.example.com. ( serial, refresh, retry, etc. ) NS ns1.example.com. NS ns2.example.com. $ORIGIN example.com. ns1 A 10.1.10.1 ns2 A 10.1.10.2 web A 10.1.15.30 ftp A 10.1.15.31 host3 A 10.1.15.32 $ORIGIN ddns.example.com NS ns1 NS ns2 ns1 A 10.1.10.1 ns2 A 10.1.10.2

    Read the article

  • Hotfix entries in event log

    - by Marco Shaw
    Server 2008/2008 R2 I'm trying to remotely monitor these servers to watch the progress of hotfixes being installed. I was able to find this in Server 2003/2003 R2: -Log: System -Source: NtServicePack It seems the above event is written when every hotfix is installed. I can't seem to find a comparable entry in Server 2008/2008 R2 though. Is there anything similar that I can easily monitor for remotely?

    Read the article

  • Routing only some local IPs through VPN on dd-wrt

    - by bo-inge-ostberg
    Much similar to this entry: http://serverfault.com/questions/94283/using-dd-wrt-to-connect-to-vpn-and-forward-all-traffic-of-certain-devices-through , I have set up my router with dd-wrt + OpenVPN to connect to a VPN. This works fine, and all traffic from behind the router goes through the VPN. How do I route(?) traffic in the router so that only certain IPs from the LAN will go through the VPN, while the others take the "normal" route? Is it also possible to allow traffic from certain local IPs to go ONLY through the VPN, making it impossible for them to use the regular internet connection if the VPN is down? I know this question was answered in the post I linked to, but that just doesn't seem to work for me. The routing table and rules change, but traffic still just goes through the VPN.

    Read the article

  • Using Automator to click on an Application-specific button

    - by Roberto Aloi
    I'm new to Automator. I need to launch a specific application and to click on one of its buttons. I've used the "Watch Me Do" feature to register the button click but, in the Automator events log, this action is being reported as "Bring the window XXX to the front." I'm then wondering if a better way exists to "record" a button-click. The reason behind my question is linked to this: http://superuser.com/questions/148386/mac-running-an-automator-task-at-night In fact, using the "Watch me do" approach, Automator is apparently not able to perform the click action when the machine is on sleep and a password is required. Any help would be much appreciated. Thanks.

    Read the article

  • Creating windows links on Linux?

    - by Bart B
    I'm running a SAMBA file store for our Windows users, and I'd like to automatically generate windows LNK files linking to other network shares that the user needs access to. I've done quite a bit of googling and I can't find a way of creating windows links on Linux, or through Perl. I did find a perl module that looked promising in CPAN, but it will only run on Windows unfortunately. If it's not possible to create .LNK files, perhaps there is an alternative solution people can suggest to allow the users to click on a file in one SAMBA store to be linked to a different SAMBA share? Thanks, Bart.

    Read the article

  • Definitive download location for MBSA "wsusscn2.cab" file for offline mode scans?

    - by Chris W. Rea
    I'm running Microsoft Baseline Security Analyzer 2.1 against some servers that don't have outbound access to the Internet, by design of firewall restrictions, and therefore I'm wishing to run MBSA in offline mode. In order to do so, I need the list of updates in the file named "wsusscn2.cab". Is there a well-known page or URL at Microsoft for downloading the most up-to-date version of that file for MBSA offline mode? Thank you.

    Read the article

  • Remote Management/VNC Mac OSX Server 10.6 from Windows Server 2008

    - by Jonar
    What is the most compatible/reliable software to remote manage an osx server using windows server? I tried to activate the remote management from osx server then use remote desktop login from windows(failed) Tried to activate built in vnc server from osx server then use vnc client from windows(failed) tried to install osxvnc server(vine server) on osx then use either tightvnc or ultravnc on windows (connects but after sometime disconnect) PS. I would prefer a free software for both servers.

    Read the article

  • TSM TDP for Exchange backup - ANS0326E

    - by Rhys
    Heres the stack Server - AIX - 5.3.0 BAclient - NT 32 bit 5.5.2.0 TDP for Exchange - 5.2.1 Backups are failing with ANS0326E (RC41) This node has exceeded its maximum number of moint points MAXNUMMP on the node is 1, which is the same as the other 2 exchange servers being backed up using this product. Only difference is that baclient version - on the working setup the baclient is at 5.4.0.2. Clues anyone?

    Read the article

  • Root, Local and Authoritative name server?

    - by thedp
    I've tried to read in Wikipedia about the key features of Root, Local and Authoritative name servers... But I have a problem understanding what each type of dns server does. Can someone please give me a short explanation of the three? Thank you

    Read the article

  • 2 SAN disks failing during the same overnight period

    - by Carl
    We have 2 HP Lefthand SAN servers in separate data rooms. Last week each of the SANs had 1 hard disk fail. They were in different positions on the SANs. Both data rooms are very well protected from power issues with UPS. Any ideas of what could have influenced this? Thanks, Carl

    Read the article

  • Whats the best way to setup an IIS7 Webfarm for an ASP.NET Application

    - by sontek
    We are looking to setup an IIS7 WebFarm... We have 2 IIS7/Windows Server 2008 boxes that will act as the load balanced webservers. How do you setup IIS/Windows Server 2008 to handle balancing the requests between the 2 servers? What is the best way to sync deployments so we only have to deploy to 1 place. Can we just have them sync their structures or do we have to use a NAS/Network Share?

    Read the article

  • Prevent server from accessing network share

    - by Daveo
    I have built a test environment I want to isolate from my production servers. As part of this I want to prevent my new server from accessing file/network shares on production. For example prevent it from accessing \\MyProdServer I updated my host file with 0.0.0.0 MyProdServer However this doesn’t work I can still access the files. I do not have firewall available nor do I want to edit my production server in anyway.

    Read the article

  • SSH: How to change value in config file in one command

    - by Brian Graham
    How can I change the value of, let's say, PasswordAuthentication in /etc/ssh/sshd_config in commands? As well, remove a # in front of the "key" I wish to value. These don't all have to be in one command. I setup quite a few servers, and remembering where everything is gets exhausting, so I want to get a series of commands I can copy paste and it does the work for me for future reference. Sample values: PermitRootLogin no ChallengeResponseAuthentication no PasswordAuthentication no UsePAM no UseDNS no

    Read the article

  • Internet connection sharing between Windows XP and Windows 7

    - by Dave
    I bought my lil sister's netbooks for Christmas and I've been having a heck of a time trying to get Internet Connection Sharing to work. The host computer is a Windows XP box and it uses a US Cellular 3G modem dongle thingy to set it's Internet access. Additionally I have a hard wire plugged into the LAN1 port of the router described below. (I tried the WAN port out of desperation but things didn't seem happy that way.) Additionally they have a linksys router (can't remember specific model number, I will find this out) that I was using to take advantage of it's wireless capabilities. Originally thought about updating the router to use dd-wrt, but after reading the instructions it looked like to much of a pita (had to downgrade firmware, then install dd-wrt) to set up, eventually I caved, out of desperation, and ended up successfully installing dd-wrt on the router. I have DHCP turned off on the router, actually all I could select was DHCP forwarder. The netbooks both have windows 7 starter installed on them. Initially, I had the networks joined to a homegroup but I dropped that and everyone is able to see everyone in their respective network explorers. When I turn on Internet Connection Sharing on the host, its IP on the LAN changed to 192.168.0.1, so I arbitrarily decided to assign the router to port 192.168.0.100. When I connect the netbooks they get IPs dynamically. As I stated before, everyone can see everyone in the network explorer, and shares can be accessed. The weird thing is that everyone can ping the router but they cannot ping each others IPs. The status on the netbooks says that there is no Internet Connectivity. Another thing I tried was manually setting the DNS servers on the netbooks to the DNS servers that the host computer has. The funny thing is when I ping an outside domain such as google.com the IP address resolves, however I get no responses from the pings. When I tried plugging the host into the WAN port I could ping the router, nor could I access the router's web access admin. Another thing I tried was turning off the firewall on the netbooks and the firewall off on the host computer for the LAN connection, and they still could not ping each other. Also I thought I should be able to start a remote desktop connection but I couldn't do that either, I also checked to make sure that computers would in fact accept a request for remote desktop connections.

    Read the article

  • Visio 2013 - how to rotate the entire page?

    - by loneboat
    I would like to rotate an entire page, including all of the shapes and text on it. I see here that you can supposedly hold down Control and click-drag the corner of the page to do it: http://office.microsoft.com/en-us/visio-help/rotate-a-page-HP085050946.aspx ... however I can't get this to work. Hovering over the corner does nothing initially, and when I hold Control the cursor becomes a scale/resize icon, rather than a rotate icon (per the MS article I linked to above). I have tried other modifier key combinations while hovering, but nothing seems to produce the rotate icon mentioned.

    Read the article

  • How to send a popup message to unknow computer connected to my WLAN?

    - by Leandro
    Is there any way to send a popup message from a Linux systen to a "random" laptop/tablet/mobile linked to my Wireless network ? For example, if I let my WLAN open and I see a not recognized computer connected to it, is there anyway to send to that device a message ? On the other hand, if I am connected to someone else open network and they may or may not be aware that their network is open, can I send them a message warning that I am accessing their network? Probably for a completely "random" device the answer should be no. But if we restrict to laptops with Win7 or Linux SO is there any service running by default on such systems that allows one to send such popup messages ? PS: I have no practical motivation for this question. This is only a curiosity.

    Read the article

  • Web server build end user acceptance testing.

    - by Zak
    I have a web server image that I am responsible for building across multiple servers. I have a list of about 50 URL's that I am supposed to go to and confirm the correct content is showing up. Which automated tools exist to do this easily (without writing a bunch of curl requests and regexes in a script file) .

    Read the article

  • Fedora 8 upgrade PHP > 5.2.4

    - by Bonn
    One of my current company servers is using old Fedora 8 and web apps compatible with PHP 5.2.x. Currently the PHP version is 5.2.4. I would like to upgrade it minimum 5.2.5 so that Drupal-7 can be installed on that machine. The problem is, there are no more repository for Fedora 8, and maybe here someone could help. I can't risk upgrading the OS since I'm not linux expert, and if anything goes wrong I could be in trouble. thanks

    Read the article

  • How to query Oracle from SQL Server ?

    - by Albert Widjaja
    Hi Everyone, I'm having difficulties in creating a connection from my SQL Server 2008 Enterprise SP2 x64 into the Oracle database 10g even though I have already install the Oracle Client 11g R2 ? I've followed this article from steps URL: http://www.ideaexcursion.com/2009/01/05/connecting-to-oracle-from-sql-server/ plus added: TNS_ADMIN into the Server variables which point into: C:\Oracle\product\11.2.0\client_1\network\admin what is working now: TNSNAMES.ORA has been copied successfully from the other Developer wworkstation i can TNSPING into the DB instance i can connect to the database using SQLplus and perform any SQL commands i can create the DSN ONLY when using "[b]C:\Windows\SysWOW64\odbcad32.exe[/b]" the normal odbcad32 doesn't show my DSN that I have just created ? the DSN created from the above works fine from the test connection. my goal: To be able to select the Oracle connection in the Linked server object but still no effect after I restart the server. (Windows Server 2008 Enterprise 64 bit SP2). Any idea please in resolving this problem would be greatly appreciated. Thanks.

    Read the article

  • Cloudify: bootstrap-localcloud: operation failed?

    - by quanta
    OS: Gentoo, CentOS Version: 2.1.0 Follow the quick start guide, I got the below error when running bootstrap-localcloud: cloudify@default> bootstrap-localcloud STARTING CLOUDIFY MANAGEMENT 2012-05-30 14:55:50,396 WARNING [org.cloudifysource.shell.commands.AbstractGSCommand] - ; \ Caused by: org.cloudifysource.shell.commands.CLIException: \ Error while starting agent. \ Please make sure that another agent is not already running. Operation failed. What port Cloudify is using to check that agent is running? PS: it's working fine when running on Windows. UPDATE: Wed May 30 22:37:30 ICT 2012 Reply to @tamirkorem and @Itai Frenkel: I'm pretty sure because this is the first time I run that command on 2 servers. More clearly, here're the output: cloudify@default> teardown-localcloud Teardown will uninstall all of the deployed services. Do you want to continue [y/n]? 2012-05-30 22:43:33,145 WARNING [org.cloudifysource.shell.commands.AbstractGSCommand] - Teardown failed. Failed to fetch the currently deployed applications list. For force teardown use the -force flag. Operation failed. cloudify@default> teardown-localcloud -force Teardown will uninstall all of the deployed services. Do you want to continue [y/n]? Failed to fetch the currently deployed applications list. Continuing teardown-localcloud. .2012-05-30 22:46:39,040 WARNING [org.cloudifysource.shell.commands.AbstractGSCommand] - Teardown aborted, an agent was not found on the local machine. Operation failed. and this one is the detailed result: cloudify@default> bootstrap-localcloud --verbose NIC Address=127.0.0.1 Lookup Locators=127.0.0.1:4172 Lookup Groups=localcloud Starting agent and management processes: gs-agent.sh gsa.global.lus 0 gsa.lus 0 gsa.gsc 0 gsa.global.gsm 0 gsa.gsm_lus 1 gsa.global.esm 0 gsa.esm 1 >/dev/null 2>&1 STARTING CLOUDIFY MANAGEMENT 2012-05-30 22:36:12,870 WARNING [org.cloudifysource.shell.commands.AbstractGSCommand] - ; Caused by: org.cloudifysource.shell.commands.CLIException: Error while starting agent. Please make sure that another agent is not already running. Command executed: /usr/local/src/gigaspaces-cloudify-2.1.0-ga/bin/gs-agent.sh gsa.global.lus 0 gsa.lus 0 gsa.gsc 0 gsa.global.gsm 0 gsa.gsm_lus 1 gsa.global.esm 0 gsa.esm 1 >/dev/null 2>&1 Reply to @Eliran Malka: there is no such process listening on port 4172: # netstat --protocol=inet -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:9050 0.0.0.0:* LISTEN 2363/tor tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 2331/mysqld tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2293/cupsd

    Read the article

  • Keepalived alternative for Solaris 10

    - by antispam
    We are considering an architecture like the one in the picture for Solaris 10 That is, high avalaibility software load balancers in front of web and application servers. Unfortunately, Keepalived is not available for Solaris at the moment. Is there an equivalent artifact for substituing Keepalived which is supported in Solaris 10? Is there an equivalent architecture for Solaris using HA SW load balancing? Thank you.

    Read the article

  • Google Accounts

    - by Alex
    Hi all, I need to setup a bunch of accounts (~50) with Google which will later be hooked up to Analytics and the Webmaster tools and I will access them via their APIs. The problem is that Google will stop me from making accounts at a certain point because it thinks I'm spamming it. I've tried bypassing the issue by proxying through Tor, but that didn't work (I suspect the Tor nodes are already abused and blacklisted). I also drove around town with my iPhone hopping towers trying to setup accounts. Also didn't work. Phone verification also doesn't work because my phone is already linked to too many accounts... So, I figure it's time to ask. How can I continue to setup Google accounts (NOT GMail...) without being considered a spammer? If there's a service from Google to whitelist my IP, even for a fee, I would be glad to sign up for it. Any suggestions will be appreciated!

    Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >