Search Results

Search found 10406 results on 417 pages for 'device'.

Page 203/417 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• High I/O latency with software RAID, LUKS encrypted and LVM partitioned KVM setup

  - by aef

  I found out a performance problems with a Mumble server, which I described in a previous question are caused by an I/O latency problem of unknown origin. As I have no idea what is causing this and how to further debug it, I'm asking for your ideas on the topic. I'm running a Hetzner EX4S root server as KVM hypervisor. The server is running Debian Wheezy Beta 4 and KVM virtualisation is utilized through LibVirt. The server has two different 3TB hard drives as one of the hard drives was replaced after S.M.A.R.T. errors were reported. The first hard disk is a Seagate Barracuda XT ST33000651AS (512 bytes logical, 4096 bytes physical sector size), the other one a Seagate Barracuda 7200.14 (AF) ST3000DM001-9YN166 (512 bytes logical and physical sector size). There are two Linux software RAID1 devices. One for the unencrypted boot partition and one as container for the encrypted rest, using both hard drives. Inside the latter RAID device lies an AES encrypted LUKS container. Inside the LUKS container there is a LVM physical volume. The hypervisor's VFS is split on three logical volumes on the described LVM physical volume: one for /, one for /home and one for swap. Here is a diagram of the block device configuration stack: sda (Physical HDD) - md0 (RAID1) - md1 (RAID1) sdb (Physical HDD) - md0 (RAID1) - md1 (RAID1) md0 (Boot RAID) - ext4 (/boot) md1 (Data RAID) - LUKS container - LVM Physical volume - LVM volume hypervisor-root - LVM volume hypervisor-home - LVM volume hypervisor-swap - … (Virtual machine volumes) The guest systems (virtual machines) are mostly running Debian Wheezy Beta 4 too. We have one additional Ubuntu Precise instance. They get their block devices from the LVM physical volume, too. The volumes are accessed through Virtio drivers in native writethrough mode. The IO scheduler (elevator) on both the hypervisor and the guest system is set to deadline instead of the default cfs as that happened to be the most performant setup according to our bonnie++ test series. The I/O latency problem is experienced not only inside the guest systems but is also affecting services running on the hypervisor system itself. The setup seems complex, but I'm sure that not the basic structure causes the latency problems, as my previous server ran four years with almost the same basic setup, without any of the performance problems. On the old setup the following things were different: Debian Lenny was the OS for both hypervisor and almost all guests Xen software virtualisation (therefore no Virtio, also) no LibVirt management Different hard drives, each 1.5TB in size (one of them was a Seagate Barracuda 7200.11 ST31500341AS, the other one I can't tell anymore) We had no IPv6 connectivity Neither in the hypervisor nor in guests we had noticable I/O latency problems According the the datasheets, the current hard drives and the one of the old machine have an average latency of 4.12ms.

  Read the article

• Multi-word dma 2

  - by Streki

  Hi, after installation of XP MODE I have in device manager in IDE ATA/ATAPI controler on my SSD disk Multi-word dma 2 mode/same mode like XP mode BIOS/. I using AHCI mode in bios and w7. Its any choice to get back Ultra DMA 6 mode? Thanks for help.

  Read the article

• Automatically run a script or a program on wake from standby in Windows 7

  - by karatchov

  I have a buggy driver for my Wifi USB dongle. Every time the computer wakes from standby, the wifi is disabled. I created a script to restart the device, but I have no idea how to automatically run it when wake from standby. I'm using Widnows 7 x64.

  Read the article

• How to set up linux watchdog daemon with Intel 6300esb

  - by ACiD GRiM

  I've been searching for this on Google for sometime now and I have yet to find proper documentation on how to connect the kernel driver for my 6300esb watchdog timer to /dev/watchdog and ensure that watchdog daemon is keeping it alive. I am using RHEL compatible Scientific Linux 6.3 in a KVM virtual machine by the way Below is everything I've tried so far: dmesg|grep 6300 i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 i6300ESB timer: initialized (0xffffc900008b8000). heartbeat=30 sec (nowayout=0) | ll /dev/watchdog crw-rw----. 1 root root 10, 130 Sep 22 22:25 /dev/watchdog | /etc/watchdog.conf #ping = 172.31.14.1 #ping = 172.26.1.255 #interface = eth0 file = /var/log/messages #change = 1407 # Uncomment to enable test. Setting one of these values to '0' disables it. # These values will hopefully never reboot your machine during normal use # (if your machine is really hung, the loadavg will go much higher than 25) max-load-1 = 24 max-load-5 = 18 max-load-15 = 12 # Note that this is the number of pages! # To get the real size, check how large the pagesize is on your machine. #min-memory = 1 #repair-binary = /usr/sbin/repair #test-binary = #test-timeout = watchdog-device = /dev/watchdog # Defaults compiled into the binary #temperature-device = #max-temperature = 120 # Defaults compiled into the binary #admin = root interval = 10 #logtick = 1 # This greatly decreases the chance that watchdog won't be scheduled before # your machine is really loaded realtime = yes priority = 1 # Check if syslogd is still running by enabling the following line #pidfile = /var/run/syslogd.pid Now maybe I'm not testing it correctly, but I would expecting that stopping the watchdog service would cause the /dev/watchdog to time out after 30 seconds and I should see the host reboot, however this does not happen. Also, here is my config for the KVM vm <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit sl6template or other application using the libvirt API. --> <domain type='kvm'> <name>sl6template</name> <uuid>960d0ac2-2e6a-5efa-87a3-6bb779e15b6a</uuid> <memory unit='KiB'>262144</memory> <currentMemory unit='KiB'>262144</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>Westmere</model> <vendor>Intel</vendor> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='require' name='aes'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/data/vms/sl6template.img'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:44:57:f6'/> <source bridge='br0.2'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:88:0f:42'/> <source bridge='br1'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <watchdog model='i6300esb' action='reset'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </watchdog> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> Any help is appreciated as the most I've found are patches to kvm and general softdog documentation or IPMI watchdog answers.

  Read the article

• Send HD video over SONET

  - by Fizzy

  In an effort to test our new OC 192 network, we would like to find a way to stream HD video over it for a demonstration. We are looking for a device or combination of devices that connects to HDMI on one side and has a XFP client interface on the other. I understand this is a ridiculous request and we are planning on an "interesting" solution.

  Read the article

• Is my Cisco switch port bad?

  - by ewwhite

  I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced last week, however the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link (switchport configuration pastebin). We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

  Read the article

• how to see disk details from linux machine with which command?

  - by jennifer

  hi all subject: LINUX - release.5.4- verify disk details from linux with sfdisk -s I can see the disk capacity as the following: sfdisk -s /dev/cciss/c0d0: 143338560 total: 143338560 blocks but how to see also the disk details as disk manufacture ... etc I try the: , but I not get the right info -(: hdparm -i /dev/cciss/c0d0 /dev/cciss/c0d0: HDIO_GET_IDENTITY failed: Inappropriate ioctl for device

  Read the article

• Can iSCSI be used with Windows Home Server?

  - by Parvenu74

  I am looking to use a combination of iSCSI (Drobo 8-drive device) and Windows Home Server (either an HP appliance or building one from an older machine). Will WHS + iSCSI work? If so will it work with an HP MediaSmart appliance or do I need to build a server for this particular task?

  Read the article

• PCMCIA Does Not Work on Dell Latitude under Windows XP

  - by Rich

  PCMCIA cards do not work on Dell Latitude e5510 under Windows XP. Works fine on Windows 7. Cards are recognized by Device Manager but do not work correctly. For example, CF adapter does not recognize when a card is inserted and network card is unable to obtain an IP address. Other systems that may be affected: Latitude E4310 Latitude E5410 Latitude E5510 Latitude E6410 Latitude E6410 ATG Latitude E6510 Dell Precision Mobile WorkStation M4500

  Read the article

• SSD and intel i5 lagging

  - by Marek Javurek

  my "new" notebook has some really wierd lags during work, youtube video etc etc... Sometimes it has bluescreen during booting, sometimes after reboot. All my drivers are updated and SSD firmware too. this is my notebook parameters: Operating System MS Windows 7 64-bit SP1 CPU Intel Core i5 @ 2.40GHz: 57 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24) Motherboard LENOVO 12985VG (CPU): 58 °C Graphics SyncMaster (1680x1050@60Hz) AMD Radeon HD 6630M Series (Lenovo) Hard Drives 125GB Crucial M4-CT128M4SSD1 ATA Device (SATA-SSD) full specs here: http://speccy.piriform.com/results/Khr265gWVgk6vKTMrhdfhlS

  Read the article

• Can iSCSI be used with Windows Home Server?

  - by Parvenu74

  I am looking to use a combination of iSCSI (Drobo 8-drive device) and Windows Home Server (either an HP appliance or building one from an older machine). Will WHS + iSCSI work? If so will it work with an HP MediaSmart appliance or do I need to build a server for this particular task?

  Read the article

• Can I use ext3 as a shared fs if I add a lock manager ?

  - by edomaur

  I need a cluster filesystem for an iSCSI device. The problem is that the servers to which it is connected generate datafiles which must be read by every other servers. Except for the writing and deleting of such files, I do not need a full locking scheme like in OCFS2 or GFS2. So, can I use a distributed lock manager (DLM) on top of an ext3 filesystem or must I use only specialized filesystem ?

  Read the article

• Is there an easy way to mass-transfer all files between two computers?

  - by Raven Dreamer

  I'm currently visiting my parents for the Christmas holidays, and as I'm sure is the case of many in the post-tech generation, my arrival brings with it the assumption of personal tech support. I've been tasked with setting up my folks' new computer, and they want to make sure all their files, yes, all their files, get transfered over to the new device. Short of manually dragging each folder in the C:/ directory onto an external hard drive and then out onto the recipient computer, is there an easier / faster way to do this?

  Read the article

• What exactly is there in the /etc/passwd file?

  - by Ram Bhat

  Well we all know that it holds passwords. But cat-ing it gives out nothing. Not even encrypted gibberish. So how exactly is a password stored in this? Is this like a device file or something?

  Read the article

• Putty can't connect to USB modem on Windows 7

  - by IanM

  I'm trying to configure caller id on a USB modem connected to a Windows 7 x32 machine. Hyperterminal isn't available so I downloaded the latest version of Putty and am using the Serial option. I'm using the modem's COM port details from Device Manager (COM5, 115200 baud), but when I open the putty session it just hangs with the cursor at the top left hand corner. Hitting the Enter key does nothing. Any ideas??

  Read the article

• Dell SP2309w not getting full resolution on Inspiron E1505

  - by Anirudh Goel

  HI Folks, i have an Inspiron E1505 with Windows 7 and Intel GMA 945 Chipset. I connected a Dell SP2309W 23" monitor via VGA to the laptop but it is not achieving it's original resolution but is stuck at 1024 x 768. Also it is detected as a Generic Non PNP Display Device. I upgraded my display driver to latest version and it fully supports Windows 7. What more can i do? Any help. Thanks a Lot in advance

  Read the article

• MacBook Pro 13 inch trackpad: Makes very annoying sounds when clicked

  - by Alex

  Hi, recently my trackpad on my MacBook Pro 13 inch has been making really annoying sounds when pressed. Almost like there's something (possibly sticky) under there. I do not recall ever spilling on this device and am wondering what's up. I don't want to take it apart because that voids all warranties with Apple. Any suggestions? Thanks.

  Read the article

• Why do I receive an error when I open an Office 2010 Document from my NAS?

  - by Tom Resing

  I've installed the release to manufacture version of Office 2010 and I can't open documents stored on my Network Attached Storage device. I receive a generic error dialog stating some generic troubleshooting the first of which is related to permissions. I can't find the special checkbox of which I'm sure there is one, to allow word to open files from this file share.

  Read the article

• My computer is not reading my PNY SD 1GB memory card

  - by Jessica

  I use a Kodak EasyShare C160 digital camera, a PNY SD 1GB memory card, and a Dell Latitude E5500 computer. I have had my camera for over a year and have always been able to transfer my pictures to my computer. Now my computer does not recognize my memory card and I get a message from the EasyShare software that says "Cannot get device information", although my computer does recognize the pictures stored on my camera's internal memory. Is there any way to access the pictures on my memory card, or are they lost forever?

  Read the article

• Optiplex can't find SATA III Controller

  - by Joel Rodgers

  I just purchased a HighPoint Rocket 620 Storage controller- Serial ATA-600- 600 MBps (OEM version) and a OWC SSD: For some reason, my Dell Optiplex 755 bios sees this card as a storage device installed in the x1 PCI Express slot, but I can't get it to boot from it. In fact, I don't even see the boot screen as mentioned by the manual. Any help would be greatly appreciated. FYI, I tried every imaginable BIOS setting, including using legacy mode instead of AHCI.

  Read the article

• file corruption on read/write 2.6.32-22-server (happens across many kernels)

  - by Jonathan

  Hi Guys, I'm having an issue where after the server has been up for a period of time (~week/few days) the server will start reading corrupt data. For instance when I run a sha1sum of a file after a fresh boot it remains the same. However after a while I will start to get segfaults and from then on whenever I read this file I get a different sha1sum. I've checked S.M.A.R.T with long tests and I've run an extended memtest86+(12 passes) My lspci is as follows: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 I could really use some help on this, do you have any idea what could cause this? It's really frustrating me as it seems to trigger entirely randomly and will not go away until I reboot. I'm also use KVM for virtualization as well as MD for software RAID on this server and the processor is a Phenom II X4 965. I don't believe it's the software raid however as this affects files also hosted on non-raid partitions so I don't know.

  Read the article

• Unecrypted Image of Truecrypt-Encrypted System Partition

  - by Dexter

  The general tenor around the internet seems to be that you can't create images of system partitions that have been encrypted (with truecrypt) other than with dd or similar sector-by-sector copy tools. These files however are very impractical given their size (and are obviously incompressible) which makes keeping multiple states/backups of your system partition rather expensive (..especially considering current hdd prices). The problem is that backup tools (like Acronis True Image, Clonezilla, etc.) won't give you the option to create an image of (mounted/opened) Truecrypt partitions, or that there is no recovery environment for restoring the backup, that would allow to run truecrypt before doing any actual restoring. After some trial and error however, I believe I have found a very simple way. Since Truecrypt (running in Linux) creates a virtual block device, that it uses for mounting the unencrypted partitions into the file system, partclone can be used for creating/restoring images. What I did: boot up a linux live disk mount/open the drive/device/partition in truecrypt unmount the filesystem mount point again, like so: umount /media/truecryptX ("X" being the partition number assigend by truecrypt) use partclone (this is what clonezilla would do too, except that clonezilla only offers you to back up real drive partitions, not virtual block devices): partclone.ntfs -c -s /dev/mapper/truecryptX -o nameOfBackupFile for restoring steps 1-3 remain the same, and step 4 is partclone.ntfs -r -s nameOfBackupFile -o /dev/mapper/truecryptX A backup and test-restore of the system (with this method) seems to have worked fine (and the changed settings were reverted to the backup-state). The backup file is ~40 GB (and compressible down to <8GB with 7zip/LZMA2 on the "fast" setting). I can't quite believe that I'm the only one that wants to create images of encrypted drives, but doesn't want to waste 100GB on the backup of one single system state. So my question now is, given how simple this was, and that no one seems to mention anywhere that this is possible - did I miss something? or did I do something wrong? Is there any situation that I didn't think of where this method will fail? Obviously, the backup file needs to be stored in some other encrypted place in order to still remain confidential, since it is unencrypted. Also, in order to do a full "bare metal" restore, one would have to actually first (re-)install Windows, encrypt it, and only then restore the backup file. The funny thing however is that you won't need to backup any partition tables, etc. since the reinstall will effectively take care of that. Is there anything else? This is imho still a lot better than having sector-by-sector images..

  Read the article

• Connect android to linux laptop

  - by Claudio Ferraro

  I've a laptop with linux and wanna to connect an android device to the linux machine. On linux i have an mpd server installed. wanna to be able to connect from an android mpd client to the server which resides on the laptop. I tryed to create an Ad-hoc Wifi network on linux but the Android cannot find the Wifi network..How can I proceed..Should I buy a wifi access point or something like that ? I've a wifi router , it could help me somehow ?

  Read the article

• Determining speed (class) of USB on PC

  - by Thomas Matthews

  Is there a method for determining the speed of a USB port on a Windows XP PC, without using a USB protocol analyzer? I'm looking for something simple, such as looking at the Device Manager. I would like to hook up some USB equipment to a USB 2.0 port, rather than the slower USB 1.0 or 1.1.

  Read the article

• Blaze error: No disk in drive

  - by jruday

  Running Blaze on Win 7 64-bit PC and getting the following error: There is not disk in the drive. Please insert a disk into drive\Device\Harddisk2\DR2. View error message here: http://screencast.com/t/ZjQxNDc0NW. Any suggestions would be appreciated. Thanks.

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >