Search Results

Search found 10406 results on 417 pages for 'device'.

Page 199/417 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

  • SSD redundancy via HDD

    - by Mascarpone
    Is there a way to guarantee redundancy to an SSD using an HDD? Raid 1 is the best choice to guarantee redundancy in HDDs, but SSDs are too expensive to guarantee redundancy via RAID. If I was to couple an SSD with an HDD, could I guarantee redundancy using the HDD as a failover device, and lazily mirroring the data on the HDD? (e.g.: every 5 minutes the data should be synchronized, rather than in real time like with Raid 1).

    Read the article

  • How to correctly partition usb flash drive and which filesystem to choose considering wear leveling?

    - by random1
    Two problems. First one: how to partition the flash drive? I shouldn't need to do this, but I'm no longer sure if my partition is properly aligned since I was forced to delete and create a new partition table after gparted complained when I tried to format the drive from FAT to ext4. The naive answer would be to say "just use default and everything is going to be alright". However if you read the following links you'll know things are not that simple: https://lwn.net/Articles/428584/ and http://linux-howto-guide.blogspot.com/2009/10/increase-usb-flash-drive-write-speed.html Then there is also the issue of cylinders, heads and sectors. Currently I get this: $sfdisk -l -uM /dev/sdd Disk /dev/sdd: 30147 cylinders, 64 heads, 32 sectors/track Warning: The partition table looks like it was made for C/H/S=*/255/63 (instead of 30147/64/32). For this listing I'll assume that geometry. Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End MiB #blocks Id System /dev/sdd1 1 30146 30146 30869504 83 Linux $fdisk -l /dev/sdd Disk /dev/sdd: 31.6 GB, 31611420672 bytes 255 heads, 63 sectors/track, 3843 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00010c28 So from my current understanding I should align partitions at 4 MiB (currently it's at 1 MiB). But I still don't know how to set the heads and sectors properly for my device. Second problem: file system. From the benchmarks I saw ext4 provides the best performance, however there is the issue of wear leveling. How can I know that my Transcend JetFlash 700's microcontroller provides for wear leveling? Or will I just be killing my drive faster? I've seen a lot of posts on the web saying don't worry the newer drives already take care of that. But I've never seen a single piece of backed evidence of that and at some point people start mixing SSD with USB flash drives technology. The safe option would be to go for ext2, however a serious of tests that I performed showed horrible performance!!! These values are from a real scenario and not some synthetic test: 42 files: 3,429,415,284 bytes copied to flash drive original fat32: 15.1 MiB/s ext4 after new partition table: 10.2 MiB/s ext2 after new partition table: 1.9 MiB/s Please read the links that I posted above before answering. I would also be interested in answers backed up with some references because a lot is said and re-said but then it lacks facts. Thank you for the help.

    Read the article

  • radvd is not assigning prefix

    - by Samik
    I'm currently trying to setup IPv6 address auto-configuration with router advertisement daemon (radvd) on a virtual machine running CentOS 6.5. But the eth0 interface is not obtaining that prefix. I've obtained the ULA prefix from here. Contents of /etc/sysctl.conf # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 net.ipv6.conf.all.forwarding = 1 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 # Controls the default maxmimum size of a mesage queue kernel.msgmnb = 65536 # Controls the maximum size of a message, in bytes kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 Contents of /etc/radvd.conf # NOTE: there is no such thing as a working "by-default" configuration file. # At least the prefix needs to be specified. Please consult the radvd.conf(5) # man page and/or /usr/share/doc/radvd-*/radvd.conf.example for help. # # interface eth0 { AdvSendAdvert on; MinRtrAdvInterval 3; MaxRtrAdvInterval 10; AdvDefaultPreference low; AdvHomeAgentFlag off; prefix fd8a:8d9d:808f:1::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr on; }; }; Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes I've also enabled radvd at startup through chkconfig. Though I noticed that radvd is starting after interfaces are brought up. I've tried restarting the network service afterwards but still I get the following link-local address only #ip -6 addr show 1: lo: mtu 16436 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qlen 1000 inet6 fe80::5054:ff:fe74:d746/64 scope link valid_lft forever preferred_lft forever Edit: Based on the answer given by Sander Steffann I still need clarification on some points but I'm posting here what worked. Contents of /etc/sysconfig/network NETWORKING=yes HOSTNAME=syslog-ng-server NETWORKING_IPV6=yes IPV6FORWARDING=yes Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes IPV6FORWARDING=no Removed following line from /etc/sysctl.conf net.ipv6.conf.all.forwarding = 1 Contents of /etc/radvd.conf is as previous.

    Read the article

  • I need ethernet controller driver, PCI bus for Presario 6010US

    - by nathaniel
    Hi I am unable to connect to the internet. ,Just installed the OS XP Pro and the device manager has a yellow question mark for controller driver, PCI bus. My network connection shows I am connected to a firewalled network with zero packets sent and received. I checked HP.COM, with no luck. Please advise what I should do. thank you very much

    Read the article

  • LUKS with LVM, mount is not persistent after reboot

    - by linxsaga
    I have created a Logical vol and used luks to encrypt it. But while rebooting the server. I get a error message (below), therefore I would have to enter the root pass and disable the /etc/fstab entry. So mount of the LUKS partition is not persistent during reboot using LUKS. I have this setup on RHEL6 and wondering what i could be missing. I want to the LV to get be mount on reboot. Later I would want to replace it with UUID instead of the device name. Error message on reboot: "Give root password for maintenance (or type Control-D to continue):" Here are the steps from the beginning: [root@rhel6 ~]# pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created [root@rhel6 ~]# vgcreate vg01 /dev/sdb Volume group "vg01" successfully created [root@rhel6 ~]# lvcreate --size 500M -n lvol1 vg01 Logical volume "lvol1" created [root@rhel6 ~]# lvdisplay --- Logical volume --- LV Name /dev/vg01/lvol1 VG Name vg01 LV UUID nX9DDe-ctqG-XCgO-2wcx-ddy4-i91Y-rZ5u91 LV Write Access read/write LV Status available # open 0 LV Size 500.00 MiB Current LE 125 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 [root@rhel6 ~]# cryptsetup luksFormat /dev/vg01/lvol1 WARNING! ======== This will overwrite data on /dev/vg01/lvol1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: [root@rhel6 ~]# mkdir /house [root@rhel6 ~]# cryptsetup luksOpen /dev/vg01/lvol1 house Enter passphrase for /dev/vg01/lvol1: [root@rhel6 ~]# mkfs.ext4 /dev/mapper/house mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 127512 inodes, 509952 blocks 25497 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 63 block groups 8192 blocks per group, 8192 fragments per group 2024 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@rhel6 ~]# mount -t ext4 /dev/mapper/house /house PS: HERE I have successfully mounted: [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# vim /etc/fstab -> as follow /dev/mapper/house /house ext4 defaults 1 2 [root@rhel6 ~]# vim /etc/crypttab -> entry as follows house /dev/vg01/lvol1 password [root@rhel6 ~]# mount -o remount /house [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# umount /house/ [root@rhel6 ~]# mount -a -> SUCCESSFUL AGAIN [root@rhel6 ~]# ls /house/ lost+found Please let me know if I am missing anything here. Thanks in advance.

    Read the article

  • Unattended Fedora kickstart that works as CD/DVD *and* USB

    - by hapalibashi
    Is it possible to create one ISO with one kickstart file that will work correctly when written to CD/DVD and as a USB? As far as I can tell I need two separate versions as modifications are needed in isolinux.cfg (ks=) and ks.cfg (because I access the install media in %post) It seems odd isolinux.cfg doesn't default to the root of the installation media and that kickstart doesn't have a global define for the source media device. Or is there an alternative to kickstart?

    Read the article

  • Issue with VMWare vSphere and NFS: re occurring apd state

    - by Bastian N.
    I am experiencing issues with VMWare vSphere 5.1 and NFS storage on 2 different setups, which result in an "All Path Down" state for the NFS shares. This first happened once or twice a day, but lately it occurs much more frequent, as specially when Acronis Backup jobs are running. Setup 1 (Production): 2 ESXi 5.1 hosts (Essentials Plus) + OpenFiler with NFS as storage Setup 2 (Lab): 1 ESXi 5.1 host + Ubuntu 12.04 LTS with NFS as storage Here is an example from the vmkernel.log: 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 248: APD Timer started for ident [987c2dd0-02658e1e] 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 395: Device or filesystem with identifier [987c2dd0-02658e1e] has entered the All Paths Down state. 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 846: APD Start for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4cf28 3 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4d0e8 3 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 277: APD Timer killed for ident [987c2dd0-02658e1e] 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 402: Device or filesystem with identifier [987c2dd0-02658e1e] has exited the All Paths Down state. 2013-05-28T08:07:41.281Z cpu1:2049)StorageApdHandler: 902: APD Exit for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4d0e8 again 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4cf28 again As long as the issue occurred once or twice a day it really wasn't a problem, but now this issue has impact on the VMs. The VMs get slow or even hang, resulting in a reset through vCenter in the production environment. I searched the web extensively and asked in forums, but till now nobody was able to help me. Based on blog posts and VMWare KB articles I tried the following NFS settings: Net.TcpipHeapSize = 32 Net.TcpipHeapMax = 128 NFS.HartbeatFrequency = 12 NFS.HartbeatMaxFailures = 10 NFS.HartbeatTimeout = 5 NFS.MaxQueueDepth = 64 Instead of NFS.MaxQueueDepth = 64 I already tried other settings like NFS.MaxQueueDepth = 32 or even NFS.MaxQueueDepth = 1. Unfortunately without any luck. It would be great if someone could help me on this issue. It is really annoying. Thanks in advance for all the help. [UPDATE] As I explained in the comment below, here is the network setup: On the production setup the NFS traffic is bound to a separate VLAN with ID 20. I am using a HP 1810 24 Port Switch. The OpenFiler system is connected to the VLAN with 4 Intel GbE NICs with dynamic LACP. The ESXis both have 4 Intel GbE NICs using 2 static LACP trunks containing 2 NICs each. One pair is connected to the regular LAN and the other one to the VLAN 20. And here is a screenshot of the vSwitch: Switch configuration: Port configuration: On the lab setup its a single Intel NIC on each side without VLAN, but with different IP subnet.

    Read the article

  • Solaris10 x86 mirror. Making second disk booteable when failure

    - by Kani
    Did a mirror (RAID1) with Solaris 10 in x86. Everything OK. Now, I´m trying to make the second disk booteable, this is: from grub or in case of failure of disk1. I edited /boot/grub/menu.lst: #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris 10 9/10 s10x_u9wos_14a X86 findroot (rootfs1,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot -s module /boot/amd64/x86.miniroot-safe #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe #---------------------END BOOTADM-------------------- #Make second disk booteable!!!!!!! title alternate boot findroot (rootfs1,1,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe But is not working. In the BIOS, when I select "alternate boot" I get: Error 15: 15 file not found also, how to configure to GRUB to make the disk2 to boot in case of error in disk1? Additionally, I did (but not related to GRUB): eeprom altbootpath=/devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a Here is the output of some commands that may help you: /sbin/biosdev 0x80 /pci@0,0/pci108e,5352@1f,2/disk@0,0 0x81 /pci@0,0/pci108e,5352@1f,2/disk@1,0 ls -l /dev/dsk/c1t?d0s0 lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t0d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@0,0:a lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t1d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a more /boot/solaris/bootenv.rc setprop ata-dma-enabled '1' setprop atapi-cd-dma-enabled '0' setprop ttyb-rts-dtr-off 'false' setprop ttyb-ignore-cd 'true' setprop ttya-rts-dtr-off 'false' setprop ttya-ignore-cd 'true' setprop ttyb-mode '9600,8,n,1,-' setprop ttya-mode '9600,8,n,1,-' setprop lba-access-ok '1' setprop prealloc-chunk-size '0x2000' setprop bootpath '/pci@0,0/pci108e,5352@1f,2/disk@0,0:a' setprop keyboard-layout 'US-English' setprop console 'text' setprop altbootpath '/pci@0,0/pci108e,5352@1f,2/disk@1,0:a' cat /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - #/dev/dsk/c1t0d0s1 - - swap - no - /dev/md/dsk/d1 - - swap - no - /dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no - /devices - /devices devfs - no - sharefs - /etc/dfs/sharetab sharefs - no - ctfs - /system/contract ctfs - no - objfs - /system/object objfs - no - swap - /tmp tmpfs - yes - df -h Filesystem size used avail capacity Mounted on /dev/md/dsk/d0 909G 11G 889G 2% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 14G 972K 14G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab /usr/lib/libc/libc_hwcap1.so.1 909G 11G 889G 2% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 14G 40K 14G 1% /tmp swap 14G 28K 14G 1% /var/run

    Read the article

  • Can you change the name of a flash drive on the boot menu?

    - by Mark Kramer
    I have two Staples brand Flash Drives. They work fine and they boot okay, but they have the same name on the boot menu, so when I have them both in the computer, I can't tell which one is the one I want to boot into. One has Ubuntu on it, the other BackTrack 5. However, the name of those drives show up different on different BIOS. What parameters affect what name shows up for a boot device and how

    Read the article

  • What is Allow multicast from Broadband Network?

    - by PeanutsMonkey
    If a wireless modem router has the option Allow multicast from Broadband Network, what does this mean exactly? What risks are there to leaving it enabled and why would you have it enabled? I understand that a broadcast is sending a packet to every device on the network and a multicast is send a packet to a specified set of addresses. A multicast packet can cross routers whereas a broadcast cannot although I don't quite understand how these "set of addresses are specified"

    Read the article

  • What iowait values are ok?

    - by alfish
    I am trying to find the bottleneck of a server running a fairly busy php/mysql site. My first culprit was io but iostat shows that on average iowait consumes only %3.60 of cpu time. here is the complete result of issuing iostat: avg-cpu: %user %nice %system %iowait %steal %idle 65.78 0.00 8.52 3.60 0.00 22.10 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 42.36 138.28 1754.70 408630278 5185216128 So I am wondering if the iowait is within acceptable range, and if not, whether switching from SATA to SSD would dramatically reduce it?

    Read the article

  • How to backup or export PowerStrip display profiles?

    - by Sk8erPeter
    I would like to save two of my saved PowerStrip display profiles. Earlier I set 720x540 resolution and some other settings (frequency, etc.) to another display device usually used in extended mode, which is now NOT connected: But when I go to "Advanced timing options", I see some different settings. I thought I could copy settings with the copy icon , but this way I would copy the wrong ones, not the predefined ones (with the 720x540 resolution): What is the best method to "export" these settings before formatting the hard drive?

    Read the article

  • Preventing Gigabit Loss due to printers [on hold]

    - by Charles
    HOW CAN I MAINTAIN Gigabit Ethernet integrity given this situation: What I have to work with: ** AC-router w/4 port gigabit N-600 router w/4 port gigabit Switch w/8 port gigabit All PCs have gigabit NICs 4-port POE injector at gigabit (all wiring = Cat 6) **Problem = Printer @ 10/100 (built-in) Printer @ 10/100 (built-in) Scanner @ 10/100 (built-in) Printer @ 10/100 (built-in)** What device (not setting up a PC) or configuration would I have to incorporate to get gigabit going given those devices? WILD SHOT: IS THERE SUCH A THING AS A SWITCH THAT CAN ACCOMMODATE THIS? THANK YOU ALL

    Read the article

  • Clonezilla disk to disk clone on a dual boot ubuntu karmic & XP setup - cannot open '/boot/grub/devi

    - by srboisvert
    I just tried to clone a failing existing boot drive for a dual boot system with Ubuntu karmic and Windows XP installed using Clonezilla. The cloning worked fine right up until the end when I got the following error: Running: grub-install --no floppy --root-directory=/tmp/hd_img.twABYW /dev/sdb grub-probe: error: Cannot open '/boot/grub/device.map' /usr/sbin/grub-install:line 374: [: =: unary operator expected What's my next step? I imagine I need to somehow rebuild my boot record for Windows and Ubuntu and edit grub.

    Read the article

  • mod_rewrite for selectors with .html

    - by user1720607
    We have a website where the URL looks something like, www.example.com/about.smart.html ( "smart" being selector added on the app server based on the useragent if its a smart phone device) We need to redirect the page to 404 if the URL is changed by the user as like below: www.example.com/about.abc.xyz.smart.html www.example.com/about.smart.abc.html I tried with the below rule, but this redirects to 404 only for 1) and not for 2) RewriteCond %{REQUEST_URI} !^(.*)(-)\.html$ RewriteRule (.*)\.(.*).smart.html$ - [R=404,L] Any pointers on this would be of great help.

    Read the article

  • Can I use plain RAID on a Drobo?

    - by cringe
    I'm thinking about a RAID device and the Drobo is on top of my list (followed by the WD ShareSpace). But I don't want to be in another walled garden with Drobos BeyondRAID technology. Can I use the Drobo with a plain RAID setup? So I can take my HDDs and connect it to another RAID controller and go on?

    Read the article

  • Netgear FVS336G as VPN Server

    - by Farseeker
    Hi All, One of our offices has made the move away from PFSense to a Netgear FVS336G. The one feature I can't seem to figure out is its VPN capabilities. I'm confused as to whether this device can act as a IPSEC VPN server, or if it can only act as the client in a Site-Site VPN. The documentation does not make this clear at all, and Google does not seem to have been any help. (Related question: here)

    Read the article

  • Can I use a 4G/LTE router from Japan (Asia) in Norway (Europe)?

    - by Leif
    We are considering to buy a wireless 4G/LTE router (LG L-04D) in Japan. Since we are moving to Norway (Europe) soon, we want something that would also work there (with a new SIM card and service provider, of course). Does anyone know if this device will work in Norway? To my current understanding, there are some frequency standards to consider, but I was not able to find any understandable information. Many thanks in advance.

    Read the article

  • Establishing Serial Port communication through USB in Linux

    - by Prashant Singh
    I am new to Ubuntu and I need to establish a serial port communication between my PC and microcontroller MSP430G2452. On connection the USB available with the Launchpad and using lsusb. It identifies the port as: Bus 005 Device 003: ID 0451:f432 Texas Instruments, Inc. eZ430 Development Tool After establishing such a connection what I need to do? My aim is to send a byte of information in Linux.

    Read the article

  • Streaming Netflix through Wifi kills all other devices

    - by maleki
    I have a "Belkin N150" Router. My current setup is wired connection to my personal tv and xbox with wireless going to the Wii and Bedroom laptop. Anytime I try streaming Netflix Instant Queue on the Wii, every other device has problems. The Wii works fine but everything else's connection is destroyed. Streaming through the Xbox doesn't create any issues for other devices. What kind of issue is occurring and how can I fix it?

    Read the article

  • Will Windows 7 work at all on my old toshiba [closed]

    - by andrew
    Windows 7 requires the following specifications: 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit) 16 GB available hard disk space (32-bit) or 20 GB (64-bit) DirectX 9 graphics device with WDDM 1.0 or higher driver Will it work at all on my old toshiba Satellite A100 PSAA8C-SK400E Intel® Core™ Solo processor T1350 (1.86GHz, 533MHz FSB, L1 Cache 32KB/32KB, L2 Cache 2MB) Standard Memory: 2x512 MB DDR2 Intel® Graphics Media Accelerator 950 with 8MB-128MB. The main problem I can see is that the graphics is not up to it.

    Read the article

  • Is using Windows Update to find Drivers for laptop good enough?

    - by user22105
    I'm trying to install drivers for my laptop after fresh install of Windows 8. From the manufacturer's website, there are many drivers and utilities available. But after running Windows Update(which finds drivers for the hardware on my laptop), I only had to install a few (the ones with Unidentified Device) I'm wondering if this is good enough? or would I skip some important drivers like Chipset Thermo management etc etc that could potentially cause harm to my laptop?

    Read the article

  • CSU/DSU reccomendation

    - by Citizen Chin
    I need a CSU/DSU to terminate a T1 from our new ISP. It needs to support PPP encapsulation and must have an ethernet output so that we can connect it directly to a switch. What device would you suggest? Thanks!

    Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >