Search Results

Search found 12068 results on 483 pages for 'sv gets'.

Page 204/483 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Wireless switch on Dell XT2 - strange behaviour of rfkill

  - by DyP

  I have an Dell Latitude XT2 using an Intel WLAN card (lspci lists it as "Intel Corporation Ultimate N WiFi Link 5300") running Lubuntu 12.04 with recent updates. The laptop has a hardware WLAN switch. I have problems activating the WLAN when booting with the hardware switch set to "off". The situation is a bit confusing, unfortunately. rfkill lists two WLAN devices (though lspci only shows the Intel one). This is the situation when booting with the hardware switch set to "Off": 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes From some tests, I conclude WLAN is only activated when both, the dell-wifi and phy0, are unblocked by soft- and hardware. But I can only unblock dell-wifi after the hardware switch is set to "on". Procedure right from boot with hardware switch set to "Off": Soft-unblocking phy0 works as expected. Could be done by start-up script. sudo rfkill unblock 0: nothing happens. Soft block of dell-wifi not removed. Set the hardware switch to "on": phy0 gets its hard block removed. Still no WLAN. sudo rfkill unblock 0: both the soft and hard lock of dell-wifi are removed. WLAN is now active and works. sudo rfkill block 0: only adds the soft block as expected. WLAN goes off again. So, in order to activate WLAN, I have to use the hardware switch and afterwards (manually) run a script - that's a bit inconvenient. Does someone know a better solution? Maybe a daemon could help that listens to rfkill events to unblock dell-wifi after I have set the hardware switch to "on"? (sounds like another workaround) When booting with the hardware switch set to "On", nothing is blocked neither hard nor soft.

  Read the article

• Splitting Pygame functionality between classes or modules?

  - by sec_goat

  I am attempting to make my pygame application more modular so that different functionalities are split up into different classes and modules. I am having some trouble getting pygame to allow me to draw or load images in secondary classes when the display has been set and pygame.init() has been done in my main class. I have typically used C# and XNA to accomplish this sort of behavior, but this time I need to use python. How do I init pygame in class1, then create an instance of class2 which loads and converts() images. I have tried pygame.init() in class 2 but then it tells me no display mode has been set, when it has been set in class1. I am under the impression i do not wnat to create multiple pygame.displays as that gets problematic I am probably missing something pythonic and simple but I am not sure what. How do I create a Display class, init python and then have other modules do my work like loading images, fonts etc.? here is the simplest version of what I am doing: class1: def __init__(self): self.screen = pygame.display.set_mode((600,400)) self.imageLoader = class2() class2: def __init__(self): self.images = ['list of images'] def load_images(): self.images = os.listdir('./images/') #get all images in the images directory for img in self.images: #read all images in the directory and load them into pygame new_img = pygame.image.load(os.path.join('images', img)).convert() scale_img = pygame.transform.scale(new_img, (pygame.display.Info().current_w, pygame.display.Info().current_h)) self.images.append(scale_img) if __name__ == "__main__": c1 = class1() c1.imageLoader.load_images() Of course when it tries to load an convert the images it tells me pygame has not been initialized, so i throw in a pygame.init() in class2 ( i have heard it is safe to init multiple times) and then the error goes to pygame.error: No video mode has been set

  Read the article

• Finding the best practice for a game simulating tool

  - by Tougheart

  I'm studying Java right now, and I'm thinking of this tool as my practice project. The game is "League of Legends" in case anyone knows it, I'm not actually simulating the game as in simulating game play, I'm just trying to create a tool that can compare different champions to each other based on their own abilities and items bought inside the game. The game basics are: Every player has a champion in a team of 5 players playing against another team. Each champion has a different set of abilities (usually 4) that s/he uses to do damage to opposing champions. Each champion gets stronger by buying different items, increasing the attack it deals or decreasing the damage received. What I want to do is to create a tool to be used outside the game enabling players to try out different builds for their champions and compare the figures against other champions they usually fight against. The goal is to enable players get a deeper understanding of the different item combinations (builds) that can be used during the games, instead of trying them out in real games which can be somehow very time consuming. What I'm stuck at is the best practice I should follow to make this possible using Java, I can't figure out which classes should inherit from which, should I make champions and items specs in the code or extracted from other files, specially that I'm talking about hundreds of items and champions to use in that tool. I'm self studying Java, and I don't have much practice at it, so I would really appreciate any broad guidelines regarding this, and sorry if my question doesn't fit here, I tried to follow the rules. English isn't my native language, so I'm really sorry if I wasn't clear enough, I would be more than happy to explain anything that's not understood.

  Read the article

• Deploying InfoPath forms &ndash; idiosyncrasies

  - by PointsToShare

  Well, I have written a sophisticated PowerShell script to expedite the deployment of InfoPath forms - .XSN file.  Along the way by way of trial and error (mostly error and error), I discovered a few little things. Here they are. •    Regardless of how the install command is run – PowerShell or the GUI in Central Admin – SharePoint enwraps the XSN inside a solution – WSP, then installs and deploys the solution. •    The solution is named by concatenating “form-“ with the first 16 characters (or less if the file name is shorter than 16) of the file name and the required WSP at the end. So if the form name was MyInfopathForm.xsn the solution name will be form-MyInfopathForm.wsp, but for WithdrawalOfRequestsForRefund.xsn it will be named form-WithdrawalOfRequ.wsp •    It only gets worse! Had there already been a solution file with the same name, Microsoft appends a three digit number to the name, like MyInfopathForm-123.wsp. Remember a digit is a finger, I suspect a middle finger, so when you deploy the same form – many versions of it, or as it was in my case – testing a script time and again, you’ll end up with many such digit (middle finger) appended solutions, all un-deployed except the last one. This is not a bug. It’s a feature!   Well, there are ways around it. When by hand, remove the solution from the solution store before deploying the form again. In the script I do the same thing. And finally - an important caveat; Make sure that all your form names are unique in the first 16 characters. If you also have a form with the name forWithdrawalOfRequestForRelief.xsn, you’re in trouble! That’s all folks!

  Read the article

• Who should have full visibility of all (non-data) requirements information?

  - by ebyrob

  I work at a smallish mid-size company where requirements are sometimes nothing more than an email or brief meeting with a subject matter manager requiring some new feature. Should a programmer working on a feature reasonably expect to have access to such "request emails" and other requirements information? Is it more appropriate for a "program manager" (PGM) to rewrite all requirements before sharing with programmers? The company is not technology-centric and has between 50 and 250 employees. (fewer than 10 programmers in sum) Our project management "software" consists of a "TODO.txt" checked into source control in "/doc/". Note: This is nothing to do with "sensitive data access". Unless a particular subject matter manager's style of email correspondence is top secret. Given the suggested duplicate, perhaps this could be a turf war, as the PGM would like to specify HOW. Whereas WHY is absent and WHAT is muddled by the time it gets through to the programmer(s)... Basically. Should specification be transparent to programmers? Perhaps a history of requirements might exist. Shouldn't a programmer be able to see that history of reqs if/when they can tell something is hinky in the spec? This isn't a question about organizing requirements. It is a question about WHO should have full VISIBILITY of requirements. I'd propose it should be ALL STAKEHOLDERS. Please point out where I'm wrong here.

  Read the article

• Realistic Jumping

  - by Seth Taddiken

  I want to make the jumping that my character does more realistic. This is what I've tried so far but it doesn't seem very realistic when the player jumps. I want it to jump up at a certain speed then slow down as it gets to the top then eventually stopping (for about one frame) and then slowly going back down but going faster and faster as it goes back down. I've been trying to make the speed at which the player jumps up slow down by one each frame then become negative and go down faster... but it doesn't work very well public bool isPlayerDown = true; public bool maxJumpLimit = false; public bool gravityReality = false; public bool leftWall = false; public bool rightWall = false; public float x = 76f; public float y = 405f; if (Keyboard.GetState().IsKeyDown(up) && this.isPlayerDown == true && this.y <= 405f) { this.isPlayerDown = false; } if (this.isPlayerDown == false && this.maxJumpLimit == false) { this.y = this.y - 6; } if (this.y <= 200) { this.maxJumpLimit = true; } if (this.isPlayerDown == true) { this.y = 405f; this.isPlayerDown = true; this.maxJumpLimit = false; } if (this.gravityReality == true) { this.y = this.y + 2f; this.gravityReality = false; } if (this.maxJumpLimit == true) { this.y = this.y + 2f; this.gravityReality = true; } if (this.y > 405f) { this.isPlayerDown = true; }

  Read the article

• Is it better to have multiple domains for cities or one single TLD?

  - by Brett

  I make websites for small businesses, and for some reason business owners love to have several domains with the same website but the TLD containing the city name. For example: 1. smallbizname.com 2. clevelandsmallbizname.com 3. columbussmallbizname.com 4. cincinnatismallbizname.com ... and so on. I've seen questions about localization per country aspects, but this is a much smaller scale, so I don't think the same rules apply. The problem I have is the companies never want to write separate content per domain, just have the same website hosted several times at each domain. I feel this probably hurts SEO for two reasons: 1. Traffic gets scattered throughout domains, could be boosting just one domain. 2. Duplicate content penalty because the content is identical. My question boils down to this... Should I redirect all the city domains to the main business name domain, or does having these separate sites help to rank better per city? And if they are redirected, how does google rank the redirects? Thanks for any input on this issue!!

  Read the article

• Client Side Prediction for a Look Vector

  - by Mike Sawayda

  So I am making a first person networked shooter. I am working on client-side prediction where I am predicting player position and look vectors client-side based on input messages received from the server. Right now I am only worried about the look vectors though. I am receiving the correct look vector from the server about 20 times per second and I am checking that against the look vector that I have client side. I want to interpolate the clients look vector towards the correct one that is server side over a period of time. Therefore no matter how far you are away from the servers look vector you will interpolate to it over the same amount of time. Ex. if you were 10 degrees off it would take the same amount of time as if you were 2 degrees off to be correctly lined up with the server copy. My code looks something like this but the problem is that the amount that you are changing the clients copy gets infinitesimally small so you will actually never reach the servers copy. This is because I am always calculating the difference and only moving by a percentage of that every frame. Does anyone have any suggestions on how to interpolate towards the servers copy correctly? if(rotationDiffY > ClientSideAttributes::minRotation) { if(serverRotY > clientRotY) { playerObjects[i]->collisionObject->rotation.y += (rotationDiffY * deltaTime); } else { playerObjects[i]->collisionObject->rotation.y -= (rotationDiffY deltaTime); } }

  Read the article

• Problems after installing a plethora of updates

  - by box

  yesterday I decided to install 32-bit Ubuntu on my 64-bit desktop, first of all, is that a problem? After installing, i had around 270 updates to install, according to the update manager. I was having trouble launching a game with WINE, so I thought updating might help. After updating, I restarted my computer, and after a long while it showed me my desktop and the icon's on it, but I didn't get anything else. I didn't have the "taskbar" (not sure what it's called, sue me) on the left side, nor the bar at the top. I also received an error message saying some program had stopped working. I decided to restart my computer again, and that was when it told me that i have to re-configure my drivers, or run in "Low Graphics" mode for one session, amongst other options. Well, I decided to try to revert to the "basic video drivers", which was an option it gave. Restarting the computer gave me the same problem as in the second paragraph. After a few more restarts and a night of restless sleep, here I am trying to start my computer again, only to receive a black screen, and my monitor "going to sleep". I'm sort of stumped here, being new to Ubuntu (desktop, at least) and I really hope this gets fixed without me having to install Ubuntu on yet another partition (I have three other partitions for various things already) tl;dr: Black screen on boot after installing updates.

  Read the article

• What will be the better way for data retrieval on application that needs to handle limited amount of data?

  - by Milanix

  Just moved this question from Stack Overflow. Since, adding my code snippets itself would make this question really long. Instead, I am pretty interested in knowing a better ways for data retrieval on application that needs to handle limited amount of data which isn't updated regularly. Let's take this example: I am writing an application which gets a schedule as an XML from server. I have written a logic in order to parse XML version and update database only if the version is newer than the local version. Although the update is checked automatically/manually on daily basis based on user preference, the actual version update happens only once per few months or so. Since, this is done by some other authority which doesn't provide API but, rather inform publicly on their changes. The actual XML contains a "(n number of groups)(days in a week) (n number of schedule)" . The group is usually 6 and the number of schedule is usually 2. So basically there would usually be only around 100 strings. Now although I have used SQLite at the moment. I want to know how to make update on database. Should I show progress dialog that the application is updating and exit the app when it's done? Since, my updates are infrequent i don't think this will really harm user experience but, is there any better ways to do it? Because I don't want update to be made when user is searching which is done using database. This will cause an database already open exception. At least I have faced this problem before. Is it better to rather parse XML every time when user wants to view certain things or to use SQLite? Since, I make lots of use of adapter in my app to create lists, will that degrade the performance?

  Read the article

• Design practice for securing data inside Azure SQL

  - by Sid

  Update: I'm looking for a specific design practice as we try to build-our-own database encryption. Azure SQL doesn't support many of the encryption features found in SQL Server (Table and Column encryption). We need to store some sensitive information that needs to be encrypted and we've rolled our own using AesCryptoServiceProvider to encrypt/decrypt data to/from the database. This solves the immediate issue (no cleartext in db) but poses other problems like Key rotation (we have to roll our own code for this, walking through the db converting old cipher text into new cipher text) metadata mapping of which tables and which columns are encrypted. This is simple when it's just couple of columns (send an email to all devs/document) but that quickly gets out of hand ... So, what is the best practice for doing application level encryption into a database that doesn't support encryption? In particular, what is a good design to solve the above two bullet points? If you had specific schema additions would love it if you could give details ("Have a NVARCHAR(max) column to store the cipher metadata as JSON" or a SQL script/commands). If someone would like to recommend a library, I'd be happy to stay away from "DIY" too. Before going too deep - I assume there isn't any way I can add encryption support to Azure by creating a stored procedure, right?

  Read the article

• What are some good ways for an intermediate programmer to build skills?

  - by Jordan

  Preface: I work mostly in Python, and Web Dev languages (HTML, CSS, Javascript and Jquery, PHP) I'm proficient at coding but I want to get better. In larger more advanced projects my programming skills break down. The more code there is the more trouble I have fitting all the pieces together. I understand syntax well, and I can catch and correct errors fairly easier. But the more advanced it gets the more I struggle. I believe I have a good understand of the basic and nuts and bolts of programming and I understand what's going on, but when it comes to larger projects, especially ones with heavy math involved my confidence flags and I start making mistakes. It's not that I can't do it, I'm just not used to doing it. Does anyone have any advice for someone who knows programming, but wants to get better? The only tutorials I can really find are beginner basic type stuff. Basically what I'm saying is I want to be confident when I'm tackling advanced projects, but I can't because I have little experience dealing with difficult situations.

  Read the article

• jquery ondrag map load only what has not been viewed

  - by David

  When a person mouse down, moves the mouse, and mouses up the system gets the different in the mouse down coord and the mouse up coords and loads in the new map items. However, the problem is it loads them every time so I want a way to track what has been loaded without too much work on checking or storing checks. Most promising. Came up with while typing this. Section the screen into 250x250 sectors and check if that sector has been loaded. Keep track of each corner of the screen and see if there is an area of those that have not loaded. Keep a record of the corners of the screen. When mouse up coords are greater then load the different. Problem is if they are at coord 10,000 then it will load from -10k to 10k positive and that is a lot of items to load. Check every item on the page to see if it is loaded. If I do this I might as well reload the whole page. If anyone has some suggestions; feel free to pass them on.

  Read the article

• Why job postings always looking for "rockstars?" [closed]

  - by Xepoch

  I have noticed a recent trend in requesting programmers who are rockstars. I get it, they're looking for someone who is really good at what they do. But why (pray) make the reference to a rockstar? Do these companies really want these traits as a real rockstar? Party all night and wake up to take care of quick business in the morning? Substance abuse, Narcissism with celebrity, Compensation well exceeding their management, Excellent at putting on a short-lived show, Entertainment instead of value, 1 hit (project) wonders or single-genre performers, Et cetera What is wrong with Senior or Principal Software Engineer who has an established and proven passion for the business? Rather do we mean quite the opposite, someone who: rolls up the sleeves and gets to work, takes appropriate direction and helps influence teams, programs in lessons' learned and proper practices, provides timely communication to the whole team, can code and understand multiple languages, understands the science and theory behind computation, Is there a trend to diversify the software engineering ranks? How many software rockstars can you hire before your band starts breaking up? Sure, there are lots of folks doing this stuff on their own, maybe even a rare few who do coding for show, but I wager the majority is for business. I don't see ads for rockstar accountants, or rockstar machinists, or rockstart CFOs. What makes the software programmer and their hiring departments lean towards this kind of job title?

  Read the article

• More productive alone than in a team?

  - by Furry

  If I work alone, I used to be superproductive, if I want to be. Running prototypes within a day, something that you can deploy and use within a few days. Not perfect, but good enough. I also had this experience a few times when working directly with someone else. Everybody could do the whole thing, but it was more fun not to do it alone and also quicker. The right two people can take an admittedly not too large project onto new levels. Now at work we have a seven person team and I do not feel nearly as productive. Not even nearly. Certain stuff needs to be checked against something else, which then needs to also take care of some new requirement, which just came in three days ago. All sorts of stuff, mostly important, but often just a technical debt from long ago or misconception or different vocabulary for the same thing or sometimes just a not too technically thought out great idea from someone who wants to have their say, and so on. Digging down the rabbit hole, I think to myself, I could do larger portions of this work faster alone (and somewhat better, too), but it's not my responsibility (someone else gets paid for that), so by design I should not care. But I do, because certain things go hand in hand (as you may experience it, when you done sideprojects on your own). I know this is something Fred Brooks has written about, but still, what's your strategy for staying as productive as you know you could be in the cubicle? Or did you quit for some related reason; and if so where did you go?

  Read the article

• 'Buy the app' landing page implementations

  - by benwad

  My site (using Django) has an app that I'm trying to push - I currently have a piece of middleware that redirects the user to a page advertising the app if they're accessing the page on the iPhone, then setting a cookie so that the user isn't bugged by the message every time they visit the site. This works fine, however checking the page with the mobile Googlebot checker shows that the Googlebot gets stuck in the redirect (since it doesn't store cookies) and therefore won't index the proper content. So, I'm trying to think of an alternative implementation that won't hurt the site's Google ranking and won't have any other adverse effects. I've considered a couple of options: Redirect (the current solution), but don't redirect if the user agent matches the Googlebot's UA string. This would be ideal, however I'm not sure if Google like their bot being treated differently from other users, and I'm afraid the site's ranking may be somehow penalised if I go ahead with this. Use a Javascript popup instead of a redirect. This would make sure the Googlebot finds the content it needs, however I envision this approach causing compatibility issues with the myriad mobile devices/browsers out there, and may affect the page load time. How valid are these options? And is there a better option for implementing this feature out there? I've tried researching this topic but surprisingly can't find any reputable-looking blog posts that explore this topic. EDIT: I posted this on SF because it seemed unsuitable for SO, but if there's another site that would be better for this issue then I'd be happy to move the question elsewhere.

  Read the article

• Non-dynamic CMS [closed]

  - by user20457

  Some of the web sites I visit every day (news, sports, etc..), although the content changes very often (several times per day), the URLs always have .html extension, what makes me thing that the content has been generated once, and then published as a static page, rather than generated in every call, or even cached in memory. For example, the fictitious site "mysports.com" have a "futbol.html" page, and then yesterday Messi gets injured and they have another thing to put in that page, then I presume they post the new item in their CMS system, and automatically a publishing action is triggered aftewards that recreates "futbol.html" in a CDN with the new item and probably discard the oldest one. Then the ETag changes and clients will get the new page if they try to access it. (the site is fictitious but this is what I believe happened yesterday in the sports site I read) This would fit in the CQRS approach, and I presume they have a huge performance. I know lots of CMS (WP, Drupal, BlogEngine.net, DNN, etc...), but I have never seen any able of doing this, or at least, I was not aware this feautre. How are called those distributed CMS? Which are the most well known? Cheers.

  Read the article

• How to fix Black screen?

  - by stupidwhiteguy

  so I recently had my question deleted and merged into a standard how to for blank screens. I am relatively new to This type of computer work and i don't understand the steps nessary to diagnose my problem well enough to solve it so this help full how to has me feeling helpless I can use Ctrl + Alt +F1 and log in So how do I use sudo commands to fix the blank screen on my old dell? sudo lsoci -nn tells me my video card is a ATI rage 128 pro ultra tf /var/log/Xorg.0.log tells me Permission denied that is all i get Sudo apt-get install --reinstall unity tried thay also have also tried Apt-get update and upgrade Please dont close this question without providing an actual answer or if you think it is an exact duplicate provide a solution that worked for that question. I see a lot of these questions as closed and there is no real answer given I will try any solutions available and report results so that others can also solve problems not be overwhelmed by overly broad troubleshooting guides that do nothing to help solve specific issues The nomodeset change from quiet splash also yields no results on reboot I still get a blank screen this screen still has contorl alt f1 abilities but that is it contorl alt f8 causes blinking cursor and F7 gets a crazy flash with green and blue then blank screen Contorl alt f1 a log in prompt in text only when run in recovery mode with failsafe graphics its says the syestem is running in low graphics mode your screen graphics card and input device settings could not be detected correctly. You will need to configure these your self how do i do that? I got this /var/log/failsafeX-backup-120909200641.tar as the location of my log files but i have no idea how to axcess sounds work in blank screen also screen responds or flashes after log in is typed and password entered really any help is good I don't even know where to start I believe 12.04 is installed and functioning but i don't think I can see it at the end of the error log it says error setting mtrr (base= oxf0000000, size= 0x01000000, type=1) inappropriate ioctl for device(25) i have tried to provide as much info as I understand how to provide

  Read the article

• Never Bet Against the Impossible

  - by BuckWoody

  My uncle used to say “If a man tells you that his car squirts milk in his eye when you lift the hood, don’t bet against that. You’ll end up with milk in your eye.” My friend Allen White tells me this is taken from a play (and was said about playing cards), but I think the sentiment holds, even in database work. I mentioned the other day that you should allow the other person to talk and actively listen before you propose a solution. Well, I saw a consultant “bet against the impossible”  the other day – and it bit her. She explained to the person telling her the problem that the situation simply couldn’t exist that way, and he proceeded to show her that it did. She got silent, typed a few things, muttered a little, and then said “well, must be something else.” She just couldn’t admit she was wrong. So don’t go there. If someone explains a problem to you with their database, listen with purpose, and then explore the troubleshooting steps you know to find the problem. But keep your absolutes to yourself. In fact, I have a friend that has recently sent me one of those. He connects to a system with SQL Server Management Studio (SSMS) version 2008 (if I recall correctly) and it shows a certain version number of the target system in the connection tab. Then he connects to it using SSMS 2008 R2 and gets a different number. Now, as far as I know, we didn’t change the connection string information, and that’s provided by the target system, so this is impossible. But I won’t tell him that. Not until I look a little more. :) Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

  - by user211487

  When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

  Read the article

• How do I troubleshoot system slowness seen when viewing PDFs or videos?

  - by asp

  Whenever I watch videos, either online of local via Totem and/or open PDF files using evince. The system gets really, really bogged down. All apps get really slow, menus take forever to display, switching windows gives me time to make a coffee, etc. I have a couple of bug reports open on this, but what do I need to do to really troubleshoot the issue? I've purged Adobe Flash from the system, but YouTube HTML5 videos still have the issue. A bunch of PDFs saved locally trigger the problem. And to (temporarily) remove the slowness, I need to shutdown the computer, breath for a few minutes, then restart. A simple reboot does not do the trick. How can I identify the cause? This only started on 13.04. I've had Ubuntu on this machine for a year without a problem until "upgrading" to 13.04. I am not a programmer, but I suspect an issue with the Intel video driver. Is there something I can run which will diagnose this, or are there concrete steps I can follow to find the culprit?

  Read the article

• 2D Tile Collision free movement

  - by andrepcg

  I'm coding a 3D game for a project using OpenGL and I'm trying to do tile collision on a surface. The surface plane is split into a grid of 64x64 pixels and I can simply check if the (x,y) tile is empty or not. Besides having a grid for collision, there's still free movement inside a tile. For each entity, in the end of the update function I simply increase the position by the velocity: pos.x += v.x; pos.y += v.y; I already have a collision grid created but my collide function is not great, i'm not sure how to handle it. I can check if the collision occurs but the way I handle is terrible. int leftTile = repelBox.x / grid->cellSize; int topTile = repelBox.y / grid->cellSize; int rightTile = (repelBox.x + repelBox.w) / grid->cellSize; int bottomTile = (repelBox.y + repelBox.h) / grid->cellSize; for (int y = topTile; y <= bottomTile; ++y) { for (int x = leftTile; x <= rightTile; ++x) { if (grid->getCell(x, y) == BLOCKED){ Rect colBox = grid->getCellRectXY(x, y); Rect xAxis = Rect(pos.x - 20 / 2.0f, pos.y - 20 / 4.0f, 20, 10); Rect yAxis = Rect(pos.x - 20 / 4.0f, pos.y - 20 / 2.0f, 10, 20); if (colBox.Intersects(xAxis)) v.x *= -1; if (colBox.Intersects(yAxis)) v.y *= -1; } } } If instead of reversing the direction I set it to false then when the entity tries to get away from the wall it's still intersecting the tile and gets stuck on that position. EDIT: I've worked with Flashpunk and it has a great function for movement and collision called moveBy. Are there any simplified implementations out there so I can check them out?

  Read the article

• NFS users getting a laggy GUI expierence

  - by elzilrac

  I am setting up a system (ubuntu 12.04) that uses ldap, pam, and autofs to load users and their home folders from a remote server. One of the options for login is sitting down at the machine and starting a GUI session. Programs such as chormium (browser) that preform many read/write operations in the ~/.cache and ~/.config files are slowing down the GUI experience as well as putting strain of the NFS server that is causing other users to have problems. Ubuntu had the handy-dandy XDG_CONFIG_HOME and XDG_CACHE_HOME variables that can be set to change the default location of .cache and .config from the home folder to somewhere else. There are several places to set them, but most of them are not optimal. /etc/environment pros: will work across all shells cons: cannot use variables like $USER so that you can't make users have different new locations for .cache and .config. Every users' new location would be the same directory. /etc/bash.bashrc pros: $USER works, so you can place them in different folders cons: only gets run for bash compatible shells ~/.pam_environment pros: works regardless of shell cons: cannot use system variables (like $USER), has it's own syntax, and has to be created for every user

  Read the article

• How can I have sound output before logging in?

  - by ??O?????

  I have a machine (Ubuntu 11.10) that I would like to have it play audio (typically through an amplifier), but the machine should be headless (where its final placement will be). I will control what is played through ssh. However, there is no sound output until I login to the graphical console. At first I thought it was an issue with pulseaudio, so I promptly removed it to use the default ALSA, but I have the same issues. I ssh to the machine, I run alsamixer and get the typical cannot open mixer: No such file or directory error (while /proc/asound/cards display correctly what I have). If I login on the graphical console, alsamixer works fine in the ssh session, and I have sound output. I logout, and then alsamixer stops working. So something runs (Xsession perhaps?) when I login that enables sound output, and gets disabled when I logout. I remember in older versions of Ubuntu, there was a drum roll when the machine showed the login screen; that is not the case anymore. Perhaps if I somehow can enable that drum roll, I'll have fixed my problem too. In any case, the question I ask is what the title says.

  Read the article

• Search multiple tables

  - by gilden

  I have developed a web application that is used mainly for archiving all sorts of textual material (documents, references to articles, books, magazines etc.). There can be any given number of archive tables in my system, each with its own schema. The schema can be changed by a moderator through the application (imagine something similar to a really dumbed down version of phpMyAdmin). Users can search for anything from all of the tables. By using FULLTEXT indexes together with substring searching (fields which do not support FULLTEXT indexing) the script inserts the results of a search to a single table and by ordering these results by the similarity measure I can fairly easily return the paginated results. However, this approach has a few problems: substring searching can only count exact results the 50% rule applies to all tables separately and thus, mysql may not return important matches or too naively discards common words. is quite expensive in terms of query numbers and execution time (not an issue right now as there's not a lot of data yet in the tables). normalized data is not even searched for (I have different tables for categories, languages and file attatchments). My planned solution Create a single table having columns similar to id, table_id, row_id, data Every time a new row is created/modified/deleted in any of the data tables this central table also gets updated with the data column containing a concatenation of all the fields in a row. I could then create a single index for Sphinx and use it for doing searches instead. Are there any more efficient solutions or best practises how to approach this? Thanks.

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >