Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar.
Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive.
In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller.
smartctl on directly connected ssd:
# smartctl -A /dev/sda
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0
4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0
5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561
12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55
192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29
232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0
233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0
225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509
226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0
227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0
228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0
smartctl on P410 connected ssd:
# ./smartctl -A -d cciss,0 /dev/cciss/c1d0
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
(Right, it is complety empty)
smartctl on P410 connected hdd:
# ./smartctl -A -d cciss,0 /dev/cciss/c0d0
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Current Drive Temperature: 27 C
Drive Trip Temperature: 68 C
Vendor (Seagate) cache information
Blocks sent to initiator = 1871654030
Blocks received from initiator = 1360012929
Blocks read from cache and sent to initiator = 2178203797
Number of read and write commands whose size <= segment size = 46052239
Number of read and write commands whose size > segment size = 0
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 3363.25
number of minutes until next internal SMART test = 12
Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?
