Search Results

Search found 8744 results on 350 pages for 'yann core'.

Page 204/350 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Sound card issues (High Definition Audio Controller)

  - by Prakash R

  I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

• Gitosis installation of public key not working...

  - by user29600

  I've been following this tutorial to install and setup git on Ubuntu Server 10.04 using Windows 7 as a client. However, after finally figuring out how it works (executed gitosis-init a bunch of times on the wrong key), I copied the id_rsa.pub file over to the server in /tmp folder and ran it again. Unfortunately it still doesn't work and when I execute git clone [email protected]:gitosis-admin.git it asks for gitosis's password rather than the RSA Passphrase. I'm assuming is the same problem this guy is having here... however, after following his instructions: Purge git-core and gitosis and manually remove the /srv/gitosis folder and following the instructions again (with the proper id_rsa.pub file this time), I'm still having the same issue. Anyone know what I'm doing wrong? Is there any way to probe for more information that might help in solving this?

  Read the article

• My laptop suppose to have 6 GB ram but it's only 2 GB installed

  - by monablo

  My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

  Read the article

• How to identify which website on my instance is receiving lots of traffic?

  - by Bob Flemming

  I am new to server administration and have just setup a new quad core instance which hosts around 15 websites. Over the past couple of days my server load has been averaging at around 15.00. I believe it is because of one (or maybe more) websites are getting spammed by spambots. Typing 'top' at the command line shows many processes from user 'www-data' which indicates lots of web traffic. Is there an easy way identify which one of my sites is taking a hammering? Reading the apache error logs is a very difficult tasks as most of the websites receive daily traffic of 10,000 + unique users. Any help would be appreciated!

  Read the article

• nagiosgraph new services not showing

  - by Eleven-Two

  I am using Nagios Core with Nagiosgraph and had only enabled graphing for cpu usage for a while. This worked fine, but now i wanted to add some more services (for example memory usage). The new services are not working (no rrd data is generated). The Nagiosgraph site only says "no data available" and I get no error in apache log, nagiosgraph.log or nagiosgraph-cgi.log. The new services are standard services (nsclient++ MEMUSE for example) and of course they are included in the map file. If I execute the checks manually, it shows also the perfdata. I added the services by enabling the "graphed-service" use. Did I miss something?

  Read the article

• Enable a program in Windows to run multiple times?

  - by user135490

  I've got this legacy software that only allows you to run one copy at a time, it detects that you have another session opened and it won't allow you to open a second instance. The problem is this is a cpu intensive program and it only use a single core. Is there any hacks or tweaks so I can trick it and open more than one instance? This would allow me to retire about 5 servers... I'm using Windows 2008 R2. I had to use cff explorer to enable the use more than 2GB RAM as the program crashes when it tries to use more than 2GB.

  Read the article

• Will this RAM work well in an iMac?

  - by sala_7

  I want to increase the RAM of my 2.4GHz Intel Core 2 Duo 24" iMac. I currently have 1GB of RAM DDR2 SDRAM 667 MHz. I really want to upgrade, but know nothing about RAM or hardware in general... These are the cards I found: http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=D4B6F603A5CA7304 Are these of quality or should I look at something else? Finally, I have 800MHz of Bus speed, couldn't I get faster RAM? Thanks for taking the time to read, and hoping you take the time to answer.

  Read the article

• oracle virtualbox doesn't work for host Kubuntu since Lucid Lynx 10.04

  - by 13east

  I have a thinkpad edge 14 core i3 2.4 ghz and 4g ram; I have tried kubuntu 10.04, 10.10, 11.10, 12.04 and 12.10 (all x64 architecture); Both oracle and ose virtualbox only works properly to install XP and windows 7 quest system on kubuntu 10.04; For every other kubuntu release since, the guest installation goes as far as formatting the virtual drive, freezes at this step, and doesn't even go as far as copying files to hard-drive to begin installation. But virtualbox has not stopped responding to commands; I can kill that one specific window with the problem installation ("machine" - "close" - "power off the machine") and start over again without having to force-kill virtualbox application. If anyone knows how I can go about addressing this problem, any help you can provide would be very much appreciated. Thank You.

  Read the article

• Cisco NAC: help with enabling FTP or moving update files

  - by kyoung

  Hi, So this is a LINUX question, and a Cisco NAC question. I'm trying to update our server from 4.1 to 4.7, and i need to move some tarball files to the NAC. the NAC Appliance runs some strange stripped down version of Fedora Core 4 copying the upgrade: The instructions say to FTP the file to the NAC appliance, however whenever i use WinSCP with root credentials, i get a notice informing me the connection was actively refused. I can't for the life of me find any .conf files that sound like winners, so I don't know how to change the settings, however the ftp command does seem to work. what exactly should I do here?

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• Which modules can be disabled in apache2.4 on windows

  - by j0h

  I have an Apache 2.4 webserver running on Windows. I am looking into system hardening and the config file httpd.conf. There are numerous load modules and I am wondering which modules I can safely disable for performance and / or security improvements. Some examples of things I would think I can disable are: LoadModule cgi_module others like LoadModule rewrite_module LoadModule version_module LoadModule proxy_module LoadModule setenvif_module I am not so sure they can be disabled. I am running php5 as a scripting engine, with no databases, and that is it. My loaded modules are: core mod_win32 mpm_winnt http_core mod_so mod_access_compat mod_actions mod_alias mod_allowmethods mod_asis mod_auth_basic mod_authn_core mod_authn_file mod_authz_core mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_cache_disk mod_mime mod_negotiation mod_proxy mod_proxy_ajp mod_rewrite mod_setenvif mod_socache_shmcb mod_ssl mod_status mod_version mod_php5

  Read the article

• BSOD after PC has been running for a while

  - by user1389999

  I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

  Read the article

• Justification of Amazon EC2 Performance

  - by Adroidist

  I have a .jar file that represents a server which receives over TCP an image in bytes (of size at most 500 kb) and writes it file. It then sobels this image and sends it over TCP socket to the client side. I ran it on my laptop and it was very fast. But when I put it on Amazon EC2 server m1.large instance, i found out it is very slow - around 10 times slower. It might be the inefficiency in the code algorithm but in fact my code is nothing but receive image (like any byte file) run the sobel algorithm and send. I have the following questions: 1- Is it normal performance of Amazon EC2 server- I have read the following links link1 and link2 2- Even if the code is not that efficient, the server is finally handling a very low load (just one client), does the "inefficient" code justify such performance? 3- My laptop is dual core only...Why would the amazon ec2 server have worse performance that my laptop? How is this explained? Excuse me for my ignorance.

  Read the article

• Automatically detecting temperature sensors on startup (Ubuntu 10.10)

  - by dpitch40

  I am very close to achieving my goal of setting up a CPU temperature graph that is displayed in the top panel of my desktop. I have the applet and have gotten it to graph temperatures, which appear to be being sensed correctly. However, my machine doesn't find its temperature sensors by default; I have to run sudo modprobe coretemp for the sensors command to work, then log off and back in before the graph applet starts displaying my temperatures. I am wondering if I can somehow tell the kernel to load the coretemp module on startup so I don't have to keep doing these extra steps. I have tried putting this command in my startup applications, but I think its need for root permission is keeping this from working. Is there a way to set up startup applications with root permission, or some other way to ensure that this module is loaded at startup? If anyone is curious, I'm running 64-bit Ubuntu 10.10 on a Lenovo G770 laptop with a Core i5 processor and the 2.6.35 kernel.

  Read the article

• Apache Request IP Based Security

  - by connec

  I run an Apache server on my home system that I've made available over the internet as I'm not always at my home system. Naturally I don't want all my home server files public, so until now I've simply had: Order allow, deny Deny from all Allow from 127.0.0.1 in my core configuration and just Allow from all in the htaccess of any directories I wanted publicly viewable. However I've decided a better system would be to centralise all the access control and just require authentication (HTTP basic) for requests not to 127.0.0.1/localhost. Is this achievable with Apache/modules? If so how would I go about it? Cheers.

  Read the article

• High Load average threshold in linux

  - by user2481010

  My one of friend said that his server load average sometime goes above 500-1000, for me it is strange value because I never saw load average more than 10. I asked him give me some snapshot of top and memory usages, he gave following details: TOP USAGES top - 06:06:03 up 117 days, 23:02, 2 users, load average: 147.37, 44.57, 15.95 Tasks: 116 total, 2 running, 113 sleeping, 0 stopped, 1 zombie Cpu(s): 16.6%us, 6.9%sy, 0.0%ni, 9.2%id, 66.5%wa, 0.0%hi, 0.8%si, 0.0%st Mem: 8161648k total, 7779528k used, 382120k free, 3296k buffers Swap: 5242872k total, 1293072k used, 3949800k free, 168660k cached Free $ free -gt total used free shared buffers cached Mem: 7 6 1 0 0 4 -/+ buffers/cache: 1 5 Swap: 4 0 4 Total: 12 6 6 Total cpu $ nproc 8 my question is it possible load average more than 100 on 8 core,12 GB mem Server? because I read many tutorial,article on load average, it said that thumb rule is "number of cores = max load" according to thumb rule here is max load average 16 then how his server running with 147.37 load server? he said that it is least value (147.37) some time goes more than 500.

  Read the article

• Audio problems with asus notebook with Bluetooth and usb devices in win 7

  - by QuickSilver

  My notebook is Asus P53E - core i5 Windows 7 installed Audio from PC speakers and headphone is distorted when i turn on bluetooth or some usb device plugged in. I belive this is a software issue. I tried updating my audio drivers but nothing help. Any help will be appreciated. Update: After a few days digging I found that this problem is causing by the asus sound enhancement application SonicFocus. The distortion stops while turning off sonic focus. Can anyone help me with a solution other than turning off SonicFocus

  Read the article

• how to stop powershell mangling command line options for program executed from shell?

  - by kem

  From the powershell prompt, when I try to run a program and feed it a command line option, powershell ends up mangling the option. Why does this happen? Is there any way to stop it besides enclosing the option in quotes? For example, from the powershell prompt: PS Microsoft.PowerShell.Core\FileSystem::\\mach\share .\myprog.exe -file=input.txt myprog.exe ends up getting two arguments: 1) -file=input 2) .txt I need to run it like: .\myprog.exe "-file=input.txt" or .\myprog.exe '-file=input.txt' to force it to be one argument. No other shell does this.

  Read the article

• Boxee on Dell 32in TV causes headaches, how to troubleshoot?

  - by brown145

  I have revamped an old pc, installing 4GB ram and a 256MB video card so that I could run Boxee to a Dell W3200 series TV that came with my apartment. It is connected via VGA, resolution is 1360x768, 24bit color, 60Htz refresh rate. Unfortunately, every time I use it I end up with a headache after less that 30 min. I have had my eyes check recently, and am able to play xbox (connected via hdmi) on the same TV without problems. What are the potential causes? My system seems to well meet or exceed the min requirements for boxee, XP, AMD Atholon 64 X2 Dual Core, 4GB RAM. Could it be the VGA cable? What is the most cost effective way to trouble shoot?

  Read the article

• Performance Bottleneck with Photoshop CS3 on XPSP3

  - by Doozer1979

  I have an intel core 2 4400, with 4GB of ram running on XP 32-BIT SP3. Photoshop CS3 becomes sluggish & unresponsive even after loading up small files, and this is with only Bridge open as well, plus McAffee AV. My photos are loaded in from a USB 2 external drive, and my c: drive is used only for programs and windows itself. Even with 4GB of RAM, i am seeing the pagefile increase to 1.6GB, whilst there appears to be 1.5GB of RAM free to use. I've defragged the drive, with defraggler, and after that the only file reported to be fragmented was the pagefile itself. Anyone have any ideas what i can do to improve/solve this?

  Read the article

• Are these symptoms of a video card is dying?

  - by K Cloud

  What I am getting from my PC: Scrambled text in the boot menu. The scrambled text dissapears and everthing goes normal after several restarts, or the computer has worked for some time. Display goes blank showing, windows kernel mode driver stopped responding. Sometimes the windows just hangs, I need to restart the pc for that. There used to be some scrambled colors in my windows, so I cleaned up my video carda and port and reinstalled the video card, things are something right. The pc runs normally for hours in safe mode, as diffault display driver works at that case. My PC specs: Core 2 Duo processor 2 GB RAM NVIDIA EN210 SILENT GPU Windows 8 Drivers details: NVIDIA drivers - v331.65, told to be fully compatible with Win8 Currently I am installing Windows 7 and will be putting the older version of driver v320 to test, yet I'm really confused weather my GPU is dying or still on go.

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• nagios ldap-group based front end login permission issues

  - by Eleven-Two

  I want to grant users access to the nagios 3 core frontend by using an active directory group ("NagiosWebfrontend" in the code below). The login works fine like this: AuthType Basic AuthName "Nagios Access" AuthBasicProvider ldap AuthzLDAPAuthoritative on AuthLDAPURL "ldap://ip-address:389/OU=user-ou,DC=domain,DC=tld?sAMAccountName?sub?(objectClass=*)" AuthLDAPBindDN CN=LDAP-USER,OU=some-ou,DC=domain,DC=tld AuthLDAPBindPassword the_pass Require ldap-group CN=NagiosWebfrontend,OU=some-ou,DC=domain,DC=tld Unfortunately, every nagios page just shows "It appears as though you do not have permission to view information for any of the services you requested...". I got the hint, that I am missing a contact in nagios configuration which is equal to my login, but creating one with the same name as the domain user had no effect on this issue. However, it would be great to find a solution without manually editing nagios.conf for every new user, so the admins could grant access to nagios by just putting the user to "NagiosWebfrontend" group. What would be the best way to solve it?

  Read the article

• DisplayPort to DVI not working on Quadro FX 580

  - by kaosvid

  I have a PNY NVIDIA Quadro FX 580 graphics card with 1x DVI and 2x DisplayPorts. The DVI port works fine with both my Viewsonic monitors but I cannot get either of the DPs to work using the supplied DP to DVI adapter; all I get is a "no signal" on either monitor when connected to either DP port. The NVIDIA Control Panel shows that the second monitor is not connected when in fact it is. How do I get the second monitor to work? System: Windows XP Professional 32-bit Asus P5Q motherboard Core 2 Duo E8500 CPU 4GB PC8500 RAM

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >