Search Results

Search found 7124 results on 285 pages for 'printer driver'.

Page 205/285 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

• simple network between xp & 7 with cross cable problem...

  - by LostLord

  hi my dear friends : i have a simple network between xp & 7 windowses with cross cable (2 pc home)... ===================================================================== the one with 7 is mother and have 2 lan device (onboard + pci) A. onboard is like this when u go to tcp/ip v4 properties:(4 adsl internet) obtain an ip... preferred dns server : 81.91.129.67 alternate dns server : 4.2.2.4 shared...no permission 4 change so every thing is ok for internet on windows 7. B. the other lan pci card that is connected to pc with xp is like this : 192.168.2.11 255.255.255.0 0.0.0.0 empty empry computer name : cougar workgroup : nethome homeNetwork is disabled (i think that is 4 2 pc's with 7 os not xp) every thing is off in network options except file & printer sharing in public area ===================================================================== pc with xp os is like this : 192.168.2.12 255.255.255.0 192.168.2.11 (mean gateway) 4.2.2.4 8.8.8.8 computer name : tiger workgroup : nethome ===================================================================== at last my little net is ok... mean both have internet , both can see each other by their ip (\\192.168.2.11 or \\192.168.2.12) my problem is when in pc with xp type \\cougar it shows an error about network path! but in pc with 7 \\tiger works perfec. what is the problem in system with xp ? in few days ago this network was ok (search by computer name) when both os were xp , so there is no problem with my cable or devices. another problem is i can not find tiger in my network list in 7 pc \ why? is something wrong with my network? thanks 4 future advance best regards

  Read the article

• Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

  - by posdef

  I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

  Read the article

• My datacard goes online but doesn't gives internet access (Fedora 14).

  - by Harsh

  I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet. The reply to dmesg | grep -e 'tty' -e 'modem' is: [ 0.000000] console [tty0] enabled [ 11.098238] USB Serial support registered for GSM modem (1-port) [ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected [ 11.102170] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 11.102207] option 6-1:1.1: GSM modem (1-port) converter detected [ 11.102334] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 11.102364] option 6-1:1.2: GSM modem (1-port) converter detected [ 11.102488] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 11.102522] option 6-1:1.3: GSM modem (1-port) converter detected [ 11.102643] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 11.102672] option 6-1:1.4: GSM modem (1-port) converter detected [ 11.102793] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB4 [ 11.103074] option: v0.7.2:USB Driver for GSM modems Can anyone tell me what shall I do?

  Read the article

• Ubuntu 10.04 Keyboard and Mouse Freezing Problem

  - by nitbuntu

  I had a partition setup with Windows XP and Ubuntu 8.04 dual booting. I recently upgraded to Ubuntu 10.04 by installing fresh from CD but leaving the previous /home folder as is. Things seemed to be working fine, but started finding that my mouse and keyboard were freezing. After a quick search on the internet, I found the following suggestions as shown here:- Ubuntu Forums Here the suggestion was to:- Edit /etc/default/grub, go to the line that begins like: GRUB_CMDLINE_LINUX_DEFAULT= Change it to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off" After that, run this command: sudo update-grub and Reboot This seemed to have resolved the issue but after a couple of days I again find my mouse and keyboard freezing. I also find that my parallel port printer had also stopped working. I have saved the output of dmesg and my syslog. The first can be viewed here but the syslog had too many characters, so if someone can suggest an alternative to freetexthost, I can post it there. Moreover, if there is any other information that should be provided, do let me know. I do hope we can get to the bottom of this issue. Thank you in advance for any help that could be provided.

  Read the article

• Cursor moves when left or right clicking on trackpad

  - by n00b

  I'm on an acer aspire v5-572p. When I am using the touchpad, and I left or right click something, the cursor moves every time by a couple pixels because unfortunately the clicking area, is also a touch area. I've tried switching to the synaptics mouse drivers provided on the Acer driver website, but the same problem exist. I have researched this problem and there is a fix for this issue in Ubuntu, but I am running Windows 8.1 x64. The problem also existed when I was on 8.0 How do I stop the cursor from moving on a click?

  Read the article

• Intermittent freeze of Windows 7 x64 on laptop

  - by georged

  I have Lenovo W500, 8GB RAM, 250GB Crucial SSD running Windows 7 x64 using boot-to-vhd. Lately I started to experience some random freezes for 5-30 seconds. And when I say "freeze" I mean it; it's like a time machine - no input taken, nothing is written anywhere, no log, no disk activity. And then suddenly machine would wake up and continue as if nothing happened. I do suspect that it's one of the drivers but I don't see any updates in the log lately except for .NET 4 framework and Adobe Reader. Out of new or updated software I can only recall Skype and IE9 but freezes started to occur definitely before IE install. Regular software includes but not limited to: Office 2010, VMWare Workstation, IE9, Chrome, Skype, Seesmic/TweeterDeck, Live Writer. How should I approach the "hunting season" to find our the culprit? Any tools or packages that could help me to identify the component, program, driver that causes the freeze? Cheers

  Read the article

• How can I get 32-bit Direct3D working on my 64-bit Windows 7 system?

  - by Daniel Stutzbach

  I recently upgraded a Dell Inspiron 6400 to Windows 7 Ultimate 64-bit. I have a 32-bit 3D application that refuses to run, giving an error of "Failed to initialise [sic] Direct3D device". The dxdiag tool tells me: DirectDraw Acceleration: Enabled Direct3D Acceleration: Not Available However, the 64-bit version of dxdiag tells me: DirectDraw Acceleration: Enabled Direct3D: Enabled I have installed and re-installed the latest graphics drivers, as well as the DirectX 9 redistributable, but it stills fails in the same way. dxdiag reports the chipset name as the "Mobile Intel(R) 945 Express Chipset Family" with the the Chip Type as "Intel(R) GMA 950". The main driver is igdumd64.dll, version 8.15.10.1930. How can I get 32-bit Direct3D working?

  Read the article

• Windows 8 Radeon update broke some games

  - by Andrew

  I've been using Windows 8 Consumer Preview 32-bit on my desktop for months, and recently did a software update through Windows Update. An update for my Radeon HD 5450 driver (Catalyst) to WDDM 1.2 was in the list of updates, and installed. When I went to play CS:GO and discovered that when loaded, it would not display the GUI (menus, sometimes even the background) after a few seconds of flickering GUI. I can still navigate the menus 'by feel' and connect to and play on servers, but have no GUI, no buy menu, no map, no cross-hairs, no health indicator, etc. I have tried CS:S, which works, and Borderlands, which doesn't even load the intro videos before the first menu screen. I've tried re-installing Catalyst from the AMD website, and the beta, and tried uninstalling and reinstalling CS:GO. The problem with it (and Borderlands) still happen. What broke, and how can I fix it? I'll be reinstalling soon anyway to dump Windows 8 back to 7, but would like to be able to game until then.

  Read the article

• DHCP over WiFi on CentOS 6 [closed]

  - by dongle26

  Using CentOS 6 I cannot get my WiFi interface to configure over DHCP. Here is my ifcfg-wlan0: This does not work (although it is correct): DEVICE=wlan0 BOOTPROTO=dhcp ONBOOT=yes HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless This works: DEVICE=wlan0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.0.253 NETMASK=255.255.255.0 DNS1=192.168.0.99 GATEWAY=192.168.0.99 HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless I don't want a static IP address, I want a DHCP assigned address. Update: Both of the above configs are correct. Please don't downvote, this really didn't work for me. It must be a bug in CentOS or my wireless driver. See my answer for details.

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• How to add higher video resolution in Ubuntu 10.04 (UNR on EEE1101HA)

  - by lexu

  I picked up an ASUS EEE 1101HA with Windows 7 and installed UBUNTU 10.04 Netbook Remix (dual boot). Ubuntu runs fine, but it doesn't recognize that the notebook LCD is 1388x768 and thus only offers 1024x768 and 800x600 as monitor resolution. So .. how can I tell it about that higher resolution? (Have root pwd & vi, una-bash-ed to use both.. ) UPDATE there is currently (early May 2010) no video-driver for the Intel GMA500 "Poulsbo" => no solution exists for now.

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Linux and GeForce 8400 dual monitor

  - by Andrea Polci

  I'm trying to install a linux distribution on my PC. I have a GeForce 8400 GS with two connected monitors. I tried with Fedora 12 and Ubuntu 9.10 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on Ubuntu, it simply hangs up during the boot. With Fedora I get this error: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Do I need to install something else? (a driver for my video card for example).

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option.

  Read the article

• Debian Lenny - network interfaces(eth) are in DOWN state

  - by pachanga

  Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

  Read the article

• Again WPA Connection problem even after changed to latest version ..please help

  - by Renjith G

  I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

  Read the article

• How to PERMANENTLY disable touchpad tap-to-click on Dell Inspiron/Windows 7

  - by Graham

  Hi all - my first time here, so I hope you can help. I've seen a lot of stuff on various forums (including here) about disabling the annoying "tap" function on a laptop touchpad. I learned the hard way not to de-install the driver (as the software suggests), since you then loose the Synaptic tab in the mouse control settings, and with it all means to modify the touchpad settings ... indicentally, if this happens to you, reboot in safe mode and do a restore, and the synaptic tab comes back. Not ideal, I know, but it works. Anyway, I have the most up-to-date drivers, and I can go to the Synaptics tab and can disable the tap-to-click function no problem. However, next time the machine is booted, tap-to-click is back on. It can alsways be disabled, but it's pain having to reset it every time the mchine is powered up. Is there a way to permanently disable it, once and for all? Thanks in advance, Graham

  Read the article

• How to disable "Automatically search for drivers and install" in Windows 7

  - by raegadfsgfsdg

  I connected my TI-89 to my Windows 7 system, and apparently it is not plug-and-play. There was a link to a Windows configuration setting made available that gave the option to automatically search their windows site for drivers and automatically install them each time i connect an unrecognized device. Well, I selected that link with the intention of it being temporary and just that one time. That didnt work and the location/install of a driver was not successful. How can I reset that setting to not automatically install whatever drivers it thinks might be fitting? I cannot find that configuration setting when I looked for it recently.

  Read the article

• How to make Exchange 2003 non-authoritive

  - by Romski

  Background We are a small company with an internally hosted Exchange 2003. It receives email for 2 domains (the company was renamed a few years back). For the sake of argument, the domains are: oldname.com newname.com We have moved newname.com to a hosted exchange service, and our DNS record is correctly routing emails. Our internal server still receives email for oldname.com, although we have asked our hosting company to accept emails for that domain. Problem My problem is that emails generated internally from monitoring software, printer, etc. are being caught by our (defunct) internal server and being delivered to the old mailboxes. I believe that what is happening is that our internal exchange server considers itself to be the authoritive server for newname.com. I think it must be looking in active directory for a mailbox and delivering it internally without ever going outside. Attempt to fix I started to follow the article here: http://support.microsoft.com/kb/321721. I removed the SMTP recipient policy for newname.com, and added a dummy address and made it primary. I also answered yes for updating the associated emails. I then restarted the Microsoft Exchange Routing System and SMTP, but emails are still being routed internally. Is there a way to force the exchange server to route all emails for the domain newname.com to the new hosted service?

  Read the article

• How can I set Vim to obey accents of my spoken language?

  - by naxa

  When pressing w or e in sentences with accents (written in my native language), such as the first one (marked **) here: **Éj-mélybol fölzengo** - csing-ling-ling - száncsengo. Száncsengo - csing-ling-ling - tél csendjén halkan ring. [1] the characters o, ö, among others [2], make my gVim think they are word-ends so it stops on them (in Normal mode). gVim stops on the positions marked with _ where it shouldn't: Éj-mélyb_ol f_ölzeng_o. I would like to set gVim so it properly handle words even when containing accents and other local characters. But where do I set this? I use it on Win32, vim v 7.3.46. [1] - excerpt of a poem by Weöres Sándor [2] - "others", not mentioned here :) like í, u are also a problem. On the other hand, gVim seems to already work with é and á. gVim version info: VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 27 2010 17:59:02) Included patches: 1-46 Compiled by Bram@KIBAALE Big version with GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse +mouseshape +multi_byte_ime/dyn +multi_lang -mzscheme +netbeans_intg +ole -osfiletype +path_extra +perl/dyn +persistent_undo -postscript +printer -profile +python/dyn +python3/dyn +quickfix +reltime +rightleft +ruby/dyn +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white +tcl/dyn -tgetent -termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save +xpm_w32

  Read the article

• Streaming video from a point-and-shoot camera that doesn't support it

  - by egasimus

  I have a Canon IXUS 120is (PowerShot SD940) - a nice digital camera that's a couple of years old. It does record fairly decent video, but, alas, can't function as a webcam - and I need to stream video over the Web. I've installed CHDK on it, and while it's quite flexible, doesn't seem to provide a solution to my problem. I suppose that the video footage is written to the SD card in real time - is there a hack that allows me to monitor the file as it is written, and broadcast its contents over the Internet? Perhaps connecting its the camera's slot to my laptop's card reader via SDIO? I'm running Windows, but I'm roughly familiar with Linux; another question has suggested a file-to-/dev/video driver - do such tools exist?

  Read the article

• Working with barcode fonts in Word

  - by Bob Rivers

  I need to create labels in Microsoft Word 2010 with numbers encoded as barcodes. The barcode's format (ean, code39, upc, etc) does not matter. I have downloaded a barcode conversion font that I found at this site. When I type the number that I want and then I format it with my new font, it produces a barcode. I then print it on an OKI laser printer (1200 dpi). The result seems to be fine, at least for common people. But, when I try to scan it, nothing happens. I tried both with a barcode scanner and a data collector, but neither of them read the barcode. My barcode scanner is working fine, because I can read commercial barcodes printed on products. Does anybody have any advice? How do I do this kind of stuff? I want to do it using Word because I will generate labels using Mail Merge. Therefore using external programs aren't option for me.

  Read the article

• SCCM 2012 R2 - OSD Task Sequence failure on physical computers

  - by Svanste

  I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try it on a physical computer it fails. So I think it has something to do with drivers, but I already tried both the "auto apply drivers" + wmi query for model method, and also the "apply driver package" + wmi query for model method. In the link below I added a zip file, containing two other zip files. One is a captured log from a failed osd on a desktop, the other is the export of my task sequence. Download zip-file with log and TS If anyone could resolve the issue, or share their own task sequence for such a task (pure sccm 2012 (R2), no MDT), that would be great.

  Read the article

• SCCM 2012 R2 - OSD Task Sequence failure on physical computers

  - by user1422136

  I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try it on a physical computer it fails. So I think it has something to do with drivers, but I already tried both the "auto apply drivers" + wmi query for model method, and also the "apply driver package" + wmi query for model method. In the link below I added a zip file, containing two other zip files. One is a captured log from a failed osd on a desktop, the other is the export of my task sequence. Download zip-file with log and TS If anyone could resolve the issue, or share their own task sequence for such a task (pure sccm 2012 (R2), no MDT), that would be great.

  Read the article

• How to Automate .inf PnP Windows 7 Drivers with Wildcard?

  - by Dos_Probie

  I am trying to automate the PnP driver installs for Windows 7 with either of the below batch files via For loop and wildcard for the .inf file. The rundll32 batch reads and echos the correct .inf file but then gives me the "Error Installation failed" and with the pnputil batch it runs without any error put does not install. How can I correct the batch files to install the inf correctly? @echo off&color a&setlocal enabledelayedexpansion cd %~dp0 set PnP=rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 .\*.inf for /f "delims=" %%a in ('dir/b %PnP%') do ( echo == Installing PnP Drivers == "%%a" ::or set PnP=pnputil -i -a "*.inf" for /f "delims=" %%a in ('dir/b %PnP%') do ( echo == Installing PnP Drivers == "%%a" ping -n 3 localhost 1>nul start "" /wait %PnP%\%%a ) cls echo. * DONE * pause exit

  Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >