Search Results

Search found 7124 results on 285 pages for 'printer driver'.

Page 208/285 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• Can't play blu ray on sony vaio fz

  - by user19455

  Hi. I have a Sony Vaio FZ (VGN-FZ31M) with a blu ray drive. I have just recently purchased the 2001 Space Odissey in blu ray but haven't been able to play on my laptop. When I try to play it with WMP i get this: "Windows Media Player cannot play the DVD. The disc was created in a manner that the Player does not support." and this with VLC: "VLC cannot open MRL. Check log for details." I have once formatted the pc and done a clean install without the sony vaio recovery cd. Is it possible that it is necessary a specific blu ray driver that I have not installed? Thanks.

  Read the article

• How Do I make an Acer T230H Touchcreen work on Ubuntu 9.10?

  - by N Rahl

  I've done this so far: sudo nano /etc/udev/rules.d/99-touchscreen.rules And added: SUBSYSTEM=="usb", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="usb/quanta_touch" SUBSYSTEM=="input", KERNEL=="event*", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="input/quanta_touch" sudo service udev restart then the instructions here: http://ubuntuforums.org/showpost.php?p=8932808&postcount=36 And then added to my xorg conf: Section "InputDevice" Identifier "Acer T230H" Driver "hidtouch" Option "SendCoreEvents" "true" Option "ReportingMode" "Raw" Option "Device" "/dev/usb/quanta_touch" Option "PacketCount" "13" Option "OpcodePressure" "852034" Option "OpcodeX" "65584" Option "OpcodeY" "65585" Option "CalibrationModel" "1" Option "CornerTopLeftX" "0" Option "CornerTopLeftY" "0" Option "CornerTopRightX" "1920" # 1920 for 23" Option "CornerTopRightY" "0" Option "CornerBottomLeftX" "0" Option "CornerBottomLeftY" "1080" # 1080 for 23" Option "CornerBottomRightX" "1920" # 1920 for 23" Option "CornerBottomRightY" "1080" # 1080 for 23" Option "CornerScreenWidth" "1920" # 1920 for 23" Option "CornerScreenHeight" "1080" # 1080 for 23" EndSection Section "ServerLayout" Identifier "Touchscreen" InputDevice "Acer T230H" "SendCoreEvents" EndSection And restarted. And the touchscreen does nothing. Any ideas?

  Read the article

• What's using up my memory?

  - by Mehrdad

  I already know what's causing this -- it's the driver for FancyCache, which I'd installed myself. But as you can see, nothing in the screenshot tells me anything about this. I just happen to know. So the question is, if I didn't know this, how would I figure out what's using up so much of my RAM? (For reference: It's currently 1.7 GiB used, and the "missing" amount -- for FancyCache -- is 512 MiB. Clearly, that extra half-gigabyte not showing up anywhere I can see below.)

  Read the article

• Firewalling gateways and IDS's

  - by Scott Davies

  Hi, For IDS, I plan to have a Win 2008 server running on the gateway with the majority of roles disabled. I plan to firewall the Internet connection, but I'd also like to install Snort to work as an IDS. However, I am guessing that regardless of the Snort install of the promiscuous Winpcap driver, I won't be able to monitor ports that the firewall blocks. My thinking is that chain of flow is: Internet-Firewall on Win 2008-Winpcap-Snort-internal network Is there a way to still monitor services that the firewall will block (i.e. TCP 445 SMB) ? Perhaps run the data through Snort and then through the firewall ? Thanks

  Read the article

• What is the best file system and allocation size for a USB flash drive?

  - by e-t172

  I'm considering using my 4 GB Kingston DataTraveler USB stick to store my Firefox and Thunderbird profiles for my laptop and desktop PCs. I want to maximize performance when using Firefox. The question is: what is the best file system and allocation size for the fastest Firefox profile operation on a USB flash drive? I'm using Windows 7 on both machines and I don't care about compatibility or the drive's lifetime. I just want to maximize performance. I could even use ext2 with the Ext2 IFS driver if that means it'll be faster. I'm assuming (perhaps I'm wrong) that putting a Firefox profile on a USB stick would be a "lots of small files" usage. In that case, it seems that NTFS would perform best, but I'm not sure. Besides I found nothing regarding the best allocation size to use. Considering that the default allocation size is designed for hard drives (which have different characteristics), I'm assuming that the default allocation size is not the best.

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by pratikk

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• Turn off tap-to-select on IBM UltraNav keyboard

  - by gworley3

  I have an IBM UltraNav USB keyboard with a trackpoint and a touchpad. Using xinput I've gotten a number of things working how I would like, but I've got one remaining problem. I can't find a way to turn off tap-to-select on the touchpad. I've searched around and everyone describes how to do it using the synaptics driver, but for some reason I can't seem to get this installed and working correctly on my Ubuntu 10.04 install. What can I do to turn this feature off without having synaptics? I'm about to lose my mind from all the accidental clicks.

  Read the article

• libvirt + ESX (HTTP response code 400 for call to 'Login')

  - by Coops

  I'm trying to connect to a vSphere cluster using the information from the libvirt documentation. $ virsh -c "vpx://[email protected]/dc1/dc1-cluster-e01/dc1-vsphere-e04/?no_verify=1" Enter root's password for 10.51.4.11: error: internal error HTTP response code 400 for call to 'Login' error: failed to connect to the hypervisor I seem to be able to establish a connection, but it fails with a "HTTP code 400". If I provide the incorrect password it fails with a 'login credentials' error, so it looks like I am getting a connection, but it's failing for another reason. Wireshark is no help as it's all done over SSL/TLS. Any thoughts folks? UPDATE: 15:21 28/02/11 FYI - I'm running libvirt-0.8.3 (the Ubuntu package recompiled with the ESX flag enabled). When I put virsh into debug mode it returns this: [snip] Enter root's password for 10.51.4.11: 15:19:09.011: debug : do_open:1249 : driver 3 ESX returned ERROR 15:19:09.011: debug : virUnrefConnect:294 : unref connection 0x98aa8f8 1 15:19:09.011: debug : virReleaseConnect:249 : release connection 0x98aa8f8 error: internal error HTTP response code 400 for call to 'Login' error: failed to connect to the hypervisor

  Read the article

• Devices on one switch can't see devices on another switch

  - by jockey69

  I have RoadRunner Internet cable service hooked to a Motorola Surfboard modem. This is connected to a 10/100 wireless router (located in the garage). Downstairs, I have a ZyXEL GS-108b gigabit switch connected to one port on the router. From this switch I ran connections to a PS3, DVR, Vonage box and a wireless router (Buffalo AirStation 10/100). The Buffalo AirStation works as a wireless AP for other laptops, iPads and cell phones. Upstairs, I have an Asus gigabit switch connected to a gaming desktop, printer, and a media server on FreeNAS (PS3 Media Server on FreeNAS). The router is configured to assign static IPs to both the PS3 and the media server. Problem - I connect a laptop to the switch downstairs after disabling the wireless, thus making sure that I am accessing internet through the wired connection (and the router in the garage). All my computers, iPads and cell phones are able to connect to the internet without a problem. My PS3 connects to the interent with a wired connection but is unable to access the media server (I get a message that no media server is found). I used a wired laptop downstairs (connected to switch downstairs) but am unable to ping either the PS3 or media server! I may be doing something silly but am at my wits' end. Please help!

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Sound from both speakers and headphones with SoundMAX ADI AD1986A on Windows 7: possible?

  - by oKtosiTe

  My ASUS A8N-VM CSM motherboard has an on-board sound chip–the SoundMAX ADI AD1986A. Although sound does work reliably on Windows 7, I was a bit disappointed that neither ASUS nor the manufacturer of the sound chip offer drivers for it for Windows 7 (or Vista for that matter). Among other things jack detection, output to front and read jack simultaneously and surround sound are no longer available using Microsoft's default HD Audio driver under Windows 7. Under Windows XP and several Linux distributions (Arch, Gentoo and Ubuntu) that I've tried everything works as it should. Since I switch between headphones and speakers quite often, this annoyance begs me to ask: aside from buying a sound card, is there any way to get sound from both outputs at the same time?

  Read the article

• Android tethering question

  - by Solignis

  Hi there, I have a Motorola Droid 1 with Android 2.2 on it. I found something odd that I don't understand why it works. If I plug my phone into my home computer which is Windows 7 and I turn on the tethering ability, I am met with a Verizon captive portal and it tells me I need to pay for a tethering plan (which I don't have). Now the weird thing, if I plug the same phone into my Ubuntu 10.10 laptop and enable tethering it works and can get on the internet with no captive portal showing up. The only thing I could notice that was different about the connections was Windows connected to the phone with an NDIS driver and Linux connected to the phone with what I think is a raw device mapping. Would that have anything to do with it?

  Read the article

• After installing Windows Phone 8 SDK, Connectify doesn't work

  - by Pratyush Nalam

  Today I installed Windows Phone 8 SDK from the official site. After installing and a couple of restarts (it restarted the PC to enable Hyper-V), I opened Connectify. I use Connectify Hotspot to connect my iPod to the internet as I have an ethernet connection and no wireless router. The problem is that now, Connectify doesn't show WiFi in Share Over. The attached screenshot shows this. Previously, before I installed the SDK, it would show Ethernet and Wi-Fi. I would select WiFi and share my internet. Now, this is completely screwed. EDIT: I found out that the Microsoft Virtual Wi-Fi Miniport Driver has got disabled and I am not able to enable it again. Please advise. Please advise on what to do Hardware: Windows 8 Pro with Media Center, Apple MacBook Pro 9,1 15 inch Mid-2012 (non retina)

  Read the article

• Synaptics touchpad scroll doesn't work on many applications

  - by Juliana Pena

  The Synaptics touchpad in my new laptop doesn't scroll at all in a number of applications, including Steam and Zune. I've narrowed the problem down to Synaptics not sending mouse wheel messages, but rather manipulating scroll bars. I'm only looking into one-finger side-of-touchpad scrolling, not two-finger scrolling. Is there a way to make it send wheel messages so that it is compatible with all applications? Configuration: Windows 7 64-bit Dell XPS 14 Latest Synaptics driver (have tried both from Synaptics and Dell) My Synaptics options window looks like this and I've tried moving all the options to no avail:

  Read the article

• Pressing an accent key (´ / ?) adds the character twice in most programs

  - by sh code

  This might seem as duplicate of Pressing key with accent character makes it enter twice but it is not: About three days ago, the issue started - I am using Slovak (Slovakia) keyboard, and the key for adding accents/diacritics (just left from backspace) acts strangely - it should "do nothing" upon pressing, and then when character key is pressed right after it, it should output that character with accent/diacritics. However, in most programs, pressing it once results in immediately outputting the accent itself twice (which under normal circumstances happens when you press the key twice). This issue doesn't happen in Visual Studio or any program I make in it, and Pidgin, it seems to happen everywhere else (firefox, notepad, MS OneNote, Windows Explorer itself). I am not aware of any software installations, driver changes or system updates between the time it worked properly and the time when it broke. What could be the problem and how do I solve it?

  Read the article

• GTA 4 crashes while trying to run it

  - by Damian

  Hi! I got those two errors when I'm trying to run GTA4: Description: Critical runtime problem Problem signature: Event Name Problem: APPLICATION CRASH System RAM: -1 Available RAM: -532590592 Number of CPUs: 4 Video Card Manufacturer: NVIDIA Video Card Description: NVIDIA GeForce 9800 GT Video Card Driver Version: 8.17.0012.5919 Version system OS: 6.1.7600.2.0.0.256.1 ID settings Regional: 1045 And the second error: Problem signature: Event Name Problem: BEX Name Application: GTAIV.exe Version Application: 1.0.7.0 Timestamp Application: 4bd9efbe Module Name error: StackHash_fea7 Module Version with the error: 0.0.0.0 Timestamp module with error: 00000000 Exception Offset: 0000b513 Code exception: c0000005 Data exception: 00000008 System Version OS: 6.1.7600.2.0.0.256.1 ID settings Regional: 1045 Additional Information 1: fea7 Additional information 2: fea78afc140967119290cc27385e0510 Additional Information 3: 20ce Additional Information 4: 20ce3e492a2aa7e5b8cfe9b7b1f05b42 My PC spec: Proc: Intel i5 (4x2,66ghz) RAM: 8GB DDR3 1066mhz Graphics: ASUS EN9800GT/DI/1GD3 OS: WINDOWS 7 64-bit I think it should work well on my PC, I couldn't find the solution to get it working so I hope You can help me. P.S. Sorry for my English - I'm from Poland.

  Read the article

• Can't communicate with Primary DNS Server

  - by horsley

  A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

  Read the article

• What options can I use in totem, xine or vlc to play on machines with limited resources?

  - by Nina

  Mplayer has some options that allow me to play it on a machine with limited resources. I can use mplayer -vo x11 -zoom -framedrop to play videos when otherwise I'd run out of memory. At least I think I'm running out of memory. I am running our of some resource for sure. -vo sets the video output driver -zoom actually I don't know what this does, but it works for me ;-) -framedrop allows mplayer to not render frames if it falls behind. Are there similar command line controls (or a defaults file) for totem, vlc or xine?

  Read the article

• Sudden graphic card change? from Nvidia 8600GT to Nvidia 7050/Nvidia nForce 610i

  - by Ken

  Yesterday I got a virus and I had the Nvidia 8600 gt, as I have had throughout the whole time I had this computer. So I decided to fully format my pc to get rid of the virus. When it was finished, It came up with Nvidia 7050/ Nvidia nForce 610i in my systems and all my games have significantly gone down by fps. Note the driver update that came with the PC that works for Nvidia 8600gt doesnt work anymore, I have tried to download it but it comes with an error message saying that the PC has an incompatible graphics card. Can anyone explain this sudden change? I know for sure I have bought an Nvidia 8600 gt, and not the current one I have.

  Read the article

• Monitor flashes black when starting video files, opening folders with video files

  - by Bob

  My entire monitor flashes black for a second or so when starting any video file. It does the same thing when closing the file. It also does this when opening a folder that has video files and a thumbnail view, or when I do anything that presumably accesses the video stream inside a video file. It happens in VLC and Windows Media Player, though it occurs to me certain video editors I have like avidemux and virtualdub don't have that issue when opening video files... It also does not happen when watching flash-based videos on web sites. It doesn't seem to happen when Quicktime. I went through and uninstalled any extraneous programs a week or so ago and didn't see any change. I also updated the graphics card driver. What can I do to troubleshoot/fix this?

  Read the article

• Touch Screen Ubuntu 10.04LTS

  - by WalterJ89

  I'm trying to get a touch screen working with Ubuntu 10.04LTS (64bit) -it is a serial touchsceen, connected at /dev/ttyS0 ,i know that works because I get garbage in the terminal when I enable it. -before the screen used a 3m driver (I believe) in XP. My knowledge of Linux is passive so I generally pick up something when I need it. To get this working I came accross a lot of tutorials (a lot outdated a bit), I'm still at a loss to get this work. I'm not sure where to put linux drivers (/usr/ or /dev/?) most tutorials kind of skip over that part. I have tried editing the /etc/X11/xorg.conf unsuccessfully. I'm not sure what the syntax for that is supposed to be. Thank You

  Read the article

• ASUS EAH4670 vs. ASUS EAH4670 V2 -- Whats the difference?

  - by roosteronacid

  I've been offered to buy a used ASUS EAH4670/DI/1GD3 graphics card. I went price-scouting to see if the offer I was given was fair, and I found out that there's a similar card, labelled ASUS EAH4670/DI/1GD3 V2. Question is; What's the difference? What's with the V2? What does it mean? Is it just a BIOS upgrade that I can do myself? Updated driver-software which I can download myself? Or is the card actually a better version--faster, more reliable (physical changes to the print), etc.?

  Read the article

• Help: Best way to do a TV-out in 7300GT Nvidia video card?

  - by Martin Ongtangco

  I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

  Read the article

• Amarok on Ubuntu 9.10 rapidly skipping tracks

  - by danwoods

  Hello all. Subject really says it all. When I try to click on any track, Amarok rapidly moves through the playlist, pulling external information (wikipedia etc) for each song, but not playing it. I feel like it might be a problem with my sound card or driver or something, but all other media players work fine. I can play sounds from within Amarok when I test different sound devices (they all play). I removed the program and re-installed it and still no luck. Any ideas?

  Read the article

• Amarok on Ubuntu 9.10 rapidly skipping tracks

  - by danwoods

  Hello all. Subject really says it all. When I try to click on any track, Amarok rapidly moves through the playlist, pulling external information (wikipedia etc) for each song, but not playing it. I feel like it might be a problem with my sound card or driver or something, but all other media players work fine. I can play sounds from within Amarok when I test different sound devices (they all play). I removed the program and re-installed it and still no luck. Any ideas?

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >