first order logic - Page 206

Prioritize compiler functionality/tasks, when designing a new language

- by Mahdi

Well, the question should be so hard to ask and I expect couple of down votes, however, I'm really interested to have your ideas and recommendations. :) I've already made a very simple compiler, with a few and limited functionality. Now I'm getting more on it to make it more like a real-world compiler. I definitely need to start over 'cause I've much more experience and ideas in this area rather a few years ago. So, I want to know, right now, from the very first step again, which tasks/features for the new compiler should implement first and which tasks has lower priority rather than others? For example, I'd say, first I'd go to decide about the object-oriented structure for the new language, but you might say, hey, just go for a compiler that could define a variable, when you finished that, then start thinking about OOP designs ... I prefer to hear the pros and cons for your suggestions also. Actually I like to start from Bottom to Top, where I could add simplest tasks first, and later adding more complex ones, but I'm totally open for any new ideas, and really appreciate that. Also please consider that I'm thinking about the design concepts. Actually I expect answers like: Priority from Highest to Lowest: variables, because .... functions, because .... loops, because .... ... Not: define a syntax for your new language, and start parsing your source code ...

Read the article

How do I get my graphic card to work properly?

- by Lucas

I been having some problems with my graphic card for a time now. But I had enough when I did'nt get Oil Rush to work on my HP Pavilion g6. The system has suggested hardware drivers for me, but the first time I installed them they pretty much fucked up the graphics. After some time I managed to get the computere to work properly (I thought) again. When the game did'nt work I tried to the hardware drivers for the graphic card anyway. First of all there was to possible choices insted of one, as the last time I installed the drivers (when it did'nt work out so good). The choices are: ATI/AMDs proprietary video drivers FGLRX (update for edition) and Proprietary FGLRX-video drivers for ATI/AMD I realized the drivers probebly are pretty much the same, so I tried the first one. But this did'nt work. Instead I was asked to "Look in to /usr/var/log/jockey.log". This did'nt helped me much. Instead I choiced the other one, wich was installed and after reboot there where some changes. First of all there was a lot more details for Unity that was'nt there before and some shortkeys are now working that did'nt before (like Ctrl + T and the Prt Sc-button). But overall everything doesn't work as it used to. Like when you browse between the workspaces it doesn't look the same. To get to the point: it doesn't work well right now even if I got some things better and now will not Oil Rush (as I mentioned in the beginning) even start. SO! Can someone give me any advice with this? I'm stuck. Can't manage to see whats wrong right now. Any help? My graphic card is AMD Radeon HD 6470M.

Read the article

Special Value Sets in Oracle Applications

- by Manoj Madhusoodanan

Here I am going to explain Special Value Sets in Oracle Applications.I have a requirement in which I want to execute a BIP report with some parameters. The first parameter Current Month should allow only MON-YYYY format.Schedule Start Date and Schedule End Date should be with in first parameter month. Approach 1If the report is through PL/SQL Stored Procedure executable the we can do all the validation in backend. Approach 2Second approach is through Special Value Sets.This value set has events like Edit,Load and Validate.We can attach PL/SQL code snippet to each event.Here I am going to attach validation routine to Validate event to validate the user input.Validate event fires when the focus leaves from the item. Here I am going to create two special value sets ( one for first parameter and another for the second and third parameter). Value Set 1Name : XXCUST_CURRENT_MONTHList Type : List of ValuesFormat Type : CharMaximum Size : 8Validation Type : SpecialEvent : ValidateFunction : XXCUST_CURRENT_MONTH_VALIDATE_ROUTINEValue Set 2Name : XXCUST_DATESList Type : List of ValuesFormat Type : Standard DateValidation Type : SpecialEvent : ValidateFunction : XXCUST_DATES_VALIDATE_ROUTINE Note: Inside the validate routine I am using FND messages.Generate message file also using "FNDMDGEN apps/password 0 Y US XXCUST DB_TO_RUNTIME". Attach XXCUST_CURRENT_MONTH to first parameter.Also XXCUST_DATES to second and third parameter. Note: Since the program is using Special Value Sets it can be submit only through Oracle Forms.Submission through OA Framework and PL/SQL APIs are not recommended. OutputGive Current Date as 01-2012 Give Schedule Start Date out of current month.

Read the article

Entity Framework and distributed Systems

- by Dirk Beckmann

I need some help or maybe only a hint for the right direction. I've got a system that is sperated into two applications. An existing VB.NET desktop client using Entity Framework 5 with code first approach and a asp.net Web Api client in C# that will be refactored right yet. It should be possible to deliver OData. The system and the datamodel is still involving and so migrations will happen in undefined intervalls. So I'm now struggling how to manage my database access on the web api system. So my favourd approch would be us Entity Framework on both systems but I'm running into trouble while creating new migrations. Two solutions I've thought about: Shared Data Access dll The first idea was to separate the data access layer to a seperate project an reference from each of the systems. The context would be the same as long as the dll is up to date in each system. This way both soulutions would be able to make a migration. The main problem ist that it is much more complicate to update a web api system than it is with the client Click Once Update Solution and not every migration is important for the web api. This would couse more update trouble and out of sync libraries Database First on Web Api The second idea was just to use the database first approch an on web api side. But it seems that all annotations will be lost by each model update. Other solutions with stored procedures have been discarded because of missing OData support and maintainability. Does anyone run into same conflicts or has any advices how such a problem can be solved!

Read the article

Inside the DLR – Invoking methods

- by Simon Cooper

So, we’ve looked at how a dynamic call is represented in a compiled assembly, and how the dynamic lookup is performed at runtime. The last piece of the puzzle is how the resolved method gets invoked, and that is the subject of this post. Invoking methods As discussed in my previous posts, doing a full lookup and bind at runtime each and every single time the callsite gets invoked would be far too slow to be usable. The results obtained from the callsite binder must to be cached, along with a series of conditions to determine whether the cached result can be reused. So, firstly, how are the conditions represented? These conditions can be anything; they are determined entirely by the semantics of the language the binder is representing. The binder has to be able to return arbitary code that is then executed to determine whether the conditions apply or not. Fortunately, .NET 4 has a neat way of representing arbitary code that can be easily combined with other code – expression trees. All the callsite binder has to return is an expression (called a ‘restriction’) that evaluates to a boolean, returning true when the restriction passes (indicating the corresponding method invocation can be used) and false when it does’t. If the bind result is also represented in an expression tree, these can be combined easily like so: if ([restriction is true]) { [invoke cached method] } Take my example from my previous post: public class ClassA { public static void TestDynamic() { CallDynamic(new ClassA(), 10); CallDynamic(new ClassA(), "foo"); } public static void CallDynamic(dynamic d, object o) { d.Method(o); } public void Method(int i) {} public void Method(string s) {} } When the Method(int) method is first bound, along with an expression representing the result of the bind lookup, the C# binder will return the restrictions under which that bind can be reused. In this case, it can be reused if the types of the parameters are the same: if (thisArg.GetType() == typeof(ClassA) && arg1.GetType() == typeof(int)) { thisClassA.Method(i); } Caching callsite results So, now, it’s up to the callsite to link these expressions returned from the binder together in such a way that it can determine which one from the many it has cached it should use. This caching logic is all located in the System.Dynamic.UpdateDelegates class. It’ll help if you’ve got this type open in a decompiler to have a look yourself. For each callsite, there are 3 layers of caching involved: The last method invoked on the callsite. All methods that have ever been invoked on the callsite. All methods that have ever been invoked on any callsite of the same type. We’ll cover each of these layers in order Level 1 cache: the last method called on the callsite When a CallSite<T> object is first instantiated, the Target delegate field (containing the delegate that is called when the callsite is invoked) is set to one of the UpdateAndExecute generic methods in UpdateDelegates, corresponding to the number of parameters to the callsite, and the existance of any return value. These methods contain most of the caching, invoke, and binding logic for the callsite. The first time this method is invoked, the UpdateAndExecute method finds there aren’t any entries in the caches to reuse, and invokes the binder to resolve a new method. Once the callsite has the result from the binder, along with any restrictions, it stitches some extra expressions in, and replaces the Target field in the callsite with a compiled expression tree similar to this (in this example I’m assuming there’s no return value): if ([restriction is true]) { [invoke cached method] return; } if (callSite._match) { _match = false; return; } else { UpdateAndExecute(callSite, arg0, arg1, ...); } Woah. What’s going on here? Well, this resulting expression tree is actually the first level of caching. The Target field in the callsite, which contains the delegate to call when the callsite is invoked, is set to the above code compiled from the expression tree into IL, and then into native code by the JIT. This code checks whether the restrictions of the last method that was invoked on the callsite (the ‘primary’ method) match, and if so, executes that method straight away. This means that, the next time the callsite is invoked, the first code that executes is the restriction check, executing as native code! This makes this restriction check on the primary cached delegate very fast. But what if the restrictions don’t match? In that case, the second part of the stitched expression tree is executed. What this section should be doing is calling back into the UpdateAndExecute method again to resolve a new method. But it’s slightly more complicated than that. To understand why, we need to understand the second and third level caches. Level 2 cache: all methods that have ever been invoked on the callsite When a binder has returned the result of a lookup, as well as updating the Target field with a compiled expression tree, stitched together as above, the callsite puts the same compiled expression tree in an internal list of delegates, called the rules list. This list acts as the level 2 cache. Why use the same delegate? Stitching together expression trees is an expensive operation. You don’t want to do it every time the callsite is invoked. Ideally, you would create one expression tree from the binder’s result, compile it, and then use the resulting delegate everywhere in the callsite. But, if the same delegate is used to invoke the callsite in the first place, and in the caches, that means each delegate needs two modes of operation. An ‘invoke’ mode, for when the delegate is set as the value of the Target field, and a ‘match’ mode, used when UpdateAndExecute is searching for a method in the callsite’s cache. Only in the invoke mode would the delegate call back into UpdateAndExecute. In match mode, it would simply return without doing anything. This mode is controlled by the _match field in CallSite<T>. The first time the callsite is invoked, _match is false, and so the Target delegate is called in invoke mode. Then, if the initial restriction check fails, the Target delegate calls back into UpdateAndExecute. This method sets _match to true, then calls all the cached delegates in the rules list in match mode to try and find one that passes its restrictions, and invokes it. However, there needs to be some way for each cached delegate to inform UpdateAndExecute whether it passed its restrictions or not. To do this, as you can see above, it simply re-uses _match, and sets it to false if it did not pass the restrictions. This allows the code within each UpdateAndExecute method to check for cache matches like so: foreach (T cachedDelegate in Rules) { callSite._match = true; cachedDelegate(); // sets _match to false if restrictions do not pass if (callSite._match) { // passed restrictions, and the cached method was invoked // set this delegate as the primary target to invoke next time callSite.Target = cachedDelegate; return; } // no luck, try the next one... } Level 3 cache: all methods that have ever been invoked on any callsite with the same signature The reason for this cache should be clear – if a method has been invoked through a callsite in one place, then it is likely to be invoked on other callsites in the codebase with the same signature. Rather than living in the callsite, the ‘global’ cache for callsite delegates lives in the CallSiteBinder class, in the Cache field. This is a dictionary, typed on the callsite delegate signature, providing a RuleCache<T> instance for each delegate signature. This is accessed in the same way as the level 2 callsite cache, by the UpdateAndExecute methods. When a method is matched in the global cache, it is copied into the callsite and Target cache before being executed. Putting it all together So, how does this all fit together? Like so (I’ve omitted some implementation & performance details): That, in essence, is how the DLR performs its dynamic calls nearly as fast as statically compiled IL code. Extensive use of expression trees, compiled to IL and then into native code. Multiple levels of caching, the first of which executes immediately when the dynamic callsite is invoked. And a clever re-use of compiled expression trees that can be used in completely different contexts without being recompiled. All in all, a very fast and very clever reflection caching mechanism.

Read the article

Welcome to the Red Gate BI Tools Team blog!

- by BI Tools Team

Welcome to the first ever post on the brand new Red Gate Business Intelligence Tools Team blog! About the team Nick Sutherland (product manager): After many years as a software developer and project manager, Nick took an MBA and turned to product marketing. SSAS Compare is his second lean startup product (the first being SQL Connect). Follow him on Twitter. David Pond (developer): Before he joined Red Gate in 2011, David made monitoring systems for Goodyear. Follow him on Twitter. Jonathan Watts (tester): Jonathan became a tester after finishing his media degree and joining Xerox. He joined Red Gate in 2004. Follow him on Twitter. James Duffy (technical author): After a spell as a writer in the video game industry, James lived briefly in Tokyo before returning to the UK to start at Red Gate. What we're working on We launched a beta of our first tool, SSAS Compare, last month. It works like SQL Compare but for SSAS cubes, letting you deploy just the changes you want. It's completely free (for now), so check it out. We're still working on it, and we're eager to hear what you think. We hope SSAS Compare will be the first of several tools Red Gate develops for BI professionals, so keep an eye out for more from us in the future. Why we need you This is your chance to help influence the course of SSAS Compare and our future BI tools. If you're a business intelligence specialist, we want to hear about the problems you face so we can build tools that solve them. What do you want to see? Tell us! We'll be posting more about SSAS Compare, business intelligence and our journey into BI in the coming days and weeks. Stay tuned!

Read the article

Botting from a stick drive

- by Zap

Am trying to boot from a usb stick. Have carefully followed the instructions at the following link and successfully downloaded and installed version Ubuntu 12.04 desk top: http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows I used the Universal-USB-Installer-1.9.0.2 as instructed and choose the "Ubuntu 12.04 desk top" option, after downloading the respective iso/zip file onto my Dell laptop from the Ubuntu site. Also modified my bios to select the usb first as boot drive instead of hard drive. Also, turned off bit blocker on my laptop and usb stick. Usb stick has the setting of "Automatically unlock this drive on this computer". When i reboot my laptop, it first boots into a black screen (i assume is the bios), but prompts saying "Remove disks or other media. Press any key to start". I press any key and regardless the laptop boots up to windows. Hence, it appears that the boot process is checking the USB first before going to the hard drive to look for it's boot disk and starting Windows 7. Is it that the USB stick is not correctly configured with Ubuntu as a boot disk? Is there anything else that i need to do besides the instructions at the following link? http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows How can I ensure that USB boot stick is configured correctly? After running the Universal-USB-Installer-1.9.0.2 to "install" Ubuntu, is there additional configuration/installation steps? What is the first file that the bios would look for on this USB drive? Is this configured somewhere in the bios, or would it just look for an grub file or /boot dir? The only message i get when booting is "Remove disks or other media. Press any key to start". Any and all help would be much appreciated.. Thanks ... :)

Read the article

Searching for entity awareness in 3D space algorithm and data structure

- by Khanser

I'm trying to do some huge AI system just for the fun and I've come to this problem. How can I let the AI entities know about each other without getting the CPU to perform redundant and costly work? Every entity has a spatial awareness zone and it has to know what's inside when it has to decide what to do. First thoughts, for every entity test if the other entities are inside the first's reach. Ok, so it was the first try and yep, that is redundant and costly. We are working with real time AI over 10000+ entities so this is not a solution. Second try, calculate some grid over the awareness zone of every entity and test whether in this zones are entities (we are working with 3D entities with float x,y,z location coordinates) testing every point in the grid with the indexed-by-coordinate entities. Well, I don't like this because is also costly, but not as the first one. Third, create some multi linked lists over the x's and y's indexed positions of the entities so when we search for an interval between x,y and z,w positions (this interval defines the square over the spatial awareness zone) over the multi linked list, we won't have 'voids'. This has the problem of finding the nearest proximity value if there isn't one at the position where we start the search. I'm not convinced with any of the ideas so I'm searching for some enlightening. Do you people have any better ideas?

Read the article

Dual booted Windows 7 freezes after login screen

- by Cathal

First-time Linux user, using a Packard Bell Easy Note TS laptop. My problem arose after I dual boot installed Ubuntu 12.04 on Windows 7 via WUBI. I backed up all my data, and reinstalled Windows from factory settings on the recovery partition. When I first tried to install Ubuntu I mistakenly closed the lid at the start of the installation, stopping it. After that I rebooted, and my second installation attempt went without a hitch. Ubuntu works perfectly, the data on the partitions seem to be fine. My problem is I can't log back in to Windows 7. After selecting it in GRUB, and then in the Windows 7/ WUBI choice on boot, it loads up perfectly til the user log in screen. After the password is inputted, it stalls on the "Welcome" busy screen. This happens in Safe mode as well. Startup repair can't find a problem and neither can CHKDSK. System restore and Last known good config have no effect either. If anyone could help me out, I'd be real grateful. edit in response to the question below, since I don't know how to comment: Windows was installed first and its partitions are the first on the list. Should I move the windows partitions to after the Linux ones on the disk? Thanks for your help.

Read the article

What do you do to balance the upper or lower case style to name file or folder between work and life? [on hold]

- by sojyq

I am a programmer from China. And I like to use English words to name my files and folders Whether it is for work or life. For example, suck as Movie, Work, QtProjects, Music and so on.And I keep the habit of initial the first letter for file name or folder name in Windows. But now I work on Ubuntu, and I found that all file name and folder name are lowercase in addition to the default folder such as Music, Movie and so on. And then I realize that in Linux world, most peoloe like to use all lowercase to name their files and folders for two reasons (1. Linux is Case sensitive. 2. It is fast for shell command.). And after work, when I switch from Linux to Windows, I confuse to use all lowercase or the first letter uppercase style to name my files in Windows. I'm caught in a dilemma. I think that all lowercase is more efficiency but the first letter uppercase is more readable. I thought for a long time and want to come up with a good answer to blance the two style name conversion. But I failed. I want to ask you that how you balance the uppercase or lowercase habbit in Windows, Mac, Linux between work and personal life style? Thank you very much! (My current solution is that when I am in Linux, I use all lowercase for files and folders, but when I am in Windows and Mac OS X, I couldn't find a good reason to convince me to use all lowercase ( I think in Windows and Mac OS X, the first letter uppercase style for me is more readable and beautiful).

Read the article

Ubuntu server is dropping SSH connections, then not allowing me to log back on

- by wilhil

I have an ESX box which I have loaded with two Ubuntu Server machines. During setup, I chose no additional packages to install as I just wanted a lightweight machine for testing. The first thing I did was change the root password via sudo passwd After ESX got on my nerves through lag, I decided to install OpenSSH via apt-get install openssh-server. It did it's business, and I then opened putty and could connect in to both machines fine. The first time it connected, it asked me to add the ssh key as obviously it did not know it. Anyway, the second server is working flawlessly, but, the first seems to be giving me trouble. I was in the middle of typing a sentence when it kicked me off for no reason and when I tried to reconnect, putty gave me a warning that the ssh key had changed and it is potentially dangerous. I attempted to log in anyway and it did not work, just the standard access denied message. Using the second machine, I SSHed in to the first machine and it worked straight away, I then killed the SSH sessions (and possibly SSH server), I then reconnected via putty and I again received the security warning message, but, it allowed me to log on fine. ... I thought "glitch" and nothing more of it, but, it just happened again! I really do not understand this and was hoping someone here can help?

Read the article

How do programers balance the upper or lower case style to name file or folder between work and life?

- by sojyq

I am a programmer from China. And I like to use English words to name my files and folders Whether it is for work or life. For example, suck as Movie, Work, QtProjects, Music and so on.And I keep the habit of initial the first letter for file name or folder name in Windows. But now I work on Ubuntu, and I found that all file name and folder name are lowercase in addition to the default folder such as Music, Movie and so on. And then I realize that in Linux world, most peoloe like to use all lowercase to name their files and folders for two reasons (1. Linux is Case sensitive. 2. It is fast for shell command.). And after work, when I switch from Linux to Windows, I confuse to use all lowercase or the first letter uppercase style to name my files in Windows. I'm caught in a dilemma. I think that all lowercase is more efficiency but the first letter uppercase is more readable. I thought for a long time and want to come up with a good answer to blance the two style name conversion. But I failed. I want to ask you that how you balance the uppercase or lowercase habbit in Windows, Mac, Linux between work and personal life style? Thank you very much! (My current solution is that when I am in Linux, I use all lowercase for files and folders, but when I am in Windows and Mac OS X, I couldn't find a good reason to convince me to use all lowercase ( I think in Windows and Mac OS X, the first letter uppercase style for me is more readable and beautiful).

Read the article

loss of sound in ubuntu 12.04

- by Leo Simon

I'm running Linux E6520 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux on a Dell Latitude E6530. (This is a new machine; have run the same version of linux on an older machine for a year, without this happening.) I've been losing sound regularly, though have not been able to isolate the trigger for this. I've scoured the web on this subject, in particular https://help.ubuntu.com/community/SoundTroubleshootingProcedure and Audio stopped working suddenly in 12.04 Nothing from the first site seemed to work for me. From the second site, I learned enough to be able to fix the problem when it happens, but nothing on the web has helped me figure out why the problem is happening in the first place. Patching together stuff from the web, and with some blind luck, I've found that the following steps seem to restore sound pulseaudio --kill pulseaudio --start pavucontrol -> output devices Click on the "Mute audio" icon, which mutes audio Click on the "Mute audio" icon, which unmutes audio. This obviously doesn't make sense: audio wasn't muted in the first place, but somehow, magically, toggling mute audio off and on seems to reset something. Can anybody suggest from this information why sound would be disappearing in the first place (it seems as though something is getting muted at the system level, but I don't know what)? a simpler (command-line/script) way of restoring sound, in particular, is it possible to reset pavucontrol from the commandline? Some other pieces of information that may be of use: The problem is clearly happening at the system level, since I've set up a clean new user, and this user has the same problems that I do. So user fixes like deleting the .pulse directory aren't (and don't) help. Sound works fine in Windows (dual-boot) so it's not a hardware problem Any help/suggestions on this would be most appreciated.

Read the article

Drawing two orthogonal strings in 3d space in Android Canvas?

- by hasanghaforian

I want to draw two strings in canvas.First string must be rotated around Y axis,for example 45 degrees.Second string must be start at the end of first string and also it must be orthogonal to first string. This is my code: String text = "In the"; float textWidth = redPaint.measureText(text); Matrix m0 = new Matrix(); Matrix m1 = new Matrix(); Matrix m2 = new Matrix(); mCamera = new Camera(); canvas.setMatrix(null); canvas.save(); mCamera.rotateY(45); mCamera.getMatrix(m0); m0.preTranslate(-100, -100); m0.postTranslate(100, 100); canvas.setMatrix(m0); canvas.drawText(text, 100, 100, redPaint); mCamera = new Camera(); mCamera.rotateY(90); mCamera.getMatrix(m1); m1.preTranslate(-textWidth - 100, -100); m1.postTranslate(textWidth + 100, 100); m2.setConcat(m1, m0); canvas.setMatrix(m2); canvas.drawText(text, 100 + textWidth, 100, greenPaint); But in result,only first string(text with red font)is visible. How can I do drawing two orthogonal strings in 3d space?

Read the article

Majoring in computer science, but i'm not to sure I'm in the right field [closed]

- by user74340

Throught out my high school years and first year in college, I never thought of studying computer science. I studied biology and chemistry during my first year, and I didn't like the research, nor any type of medical professionals. So I took an introductory CS course, and loved the diverse roles this field can have. So I declare CS as my major. I finished first, and second year CS courses. Then now, I'm doing my co-op(intern) as a web developer. During my first and second year, I was always just an average student. My grades is around low B. But I put so much effort to understand my course' materials. I see many brilliants peers who not only excel at what they do, but have the passion. So I always doubt myself if I don't belong in this field. I'm not good at math, I usually get Cs on my math courses. My internship (a corporate developer job) is okay. But doesn't want to work like this after my graduation). Some aspects of CS that I like is HCI. In my experience in programming, and group projects, I enjoyed designing User interface, and thinking of user experience. I'm also thinking of taking some psychology courses.. I would appreciate any criticism, or advices.

Read the article

Is there supposed to be a Windows Network folder in the file manager?

- by Cindy

I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? Original question First of all I just want to say, I wish I had tried Ubuntu a couple years ago when I first heard about it, but I was like a lot of the population and went with the "easy way" and stuck with Windows because I didn't want to take the time to learn something new. Well, about 3 months ago I realized someone had hacked into my computer, and then found they had hacked my facebook account so I decided I had better do a complete credit check. I found student loans (totalling about 30,000 so far) had recently showed up on my credit report. I think it's going to be a long, long road to recovery now but I'm hoping Ubuntu will be a start and definitely an eye opener. My relationship with Windows is over. I had 3 antivirus programs running, none were protecting me like I thought they were. Turned out a free program that I downloaded was the only one that could detect and clean the virus, but by then it was too late. Anyhow, my question is, I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? I am using a local ISP (and won't be much longer because I am very paranoid at this point) and I want to make sure all is ok before I put my new hard drive in and install Ubuntu. Any help would be appreciated. Also, I want to thank Ubuntu and the community for giving people an alternative.

Read the article

LINQ – Skip() and Take() methods

- by nmarun

I had this issue recently where I have an array of integers and I’m doing some Skip(n) and then a Take(m) on the collection. Here’s an abstraction of the code: 1: int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; 2: var taken = numbers.Skip(3).Take(3); 3: foreach (var i in taken) 4: { 5: Console.WriteLine(i); 6: } The output is as expected: 3, 9, 8 – skip the first three and then take the next three items. But, what happens if I do something like: 1: var taken = numbers.Skip(7).Take(5); In English – skip the first seven and the take the next 5 items from an array that contains only 10 elements. Think it’ll throw the IndexOutOfRangeException exception? Nope. These extension methods are a little smarter than that. Even though the user has requested more elements than what exists in the collection, the Take method only returns the first three thereby making the output of the program as: 7, 2, 0. The scenario is handled similarly when you do: 1: var taken = numbers.Take(5).Skip(7); This one takes the first 5 elements from the numbers array and then skips 7 of them. This is what is looks like in the debug mode: Just wanted to share this behavior.

Read the article

Polynomial division overloading operator

- by Vlad

Ok. here's the operations i successfully code so far thank's to your help: Adittion: polinom operator+(const polinom& P) const { polinom Result; constIter i = poly.begin(), j = P.poly.begin(); while (i != poly.end() && j != P.poly.end()) { //logic while both iterators are valid if (i->pow > j->pow) { //if the current term's degree of the first polynomial is bigger Result.insert(i->coef, i->pow); i++; } else if (j->pow > i->pow) { // if the other polynomial's term degree is bigger Result.insert(j->coef, j->pow); j++; } else { // if both are equal Result.insert(i->coef + j->coef, i->pow); i++; j++; } } //handle the remaining items in each list //note: at least one will be equal to end(), but that loop will simply be skipped while (i != poly.end()) { Result.insert(i->coef, i->pow); ++i; } while (j != P.poly.end()) { Result.insert(j->coef, j->pow); ++j; } return Result; } Subtraction: polinom operator-(const polinom& P) const //fixed prototype re. const-correctness { polinom Result; constIter i = poly.begin(), j = P.poly.begin(); while (i != poly.end() && j != P.poly.end()) { //logic while both iterators are valid if (i->pow > j->pow) { //if the current term's degree of the first polynomial is bigger Result.insert(-(i->coef), i->pow); i++; } else if (j->pow > i->pow) { // if the other polynomial's term degree is bigger Result.insert(-(j->coef), j->pow); j++; } else { // if both are equal Result.insert(i->coef - j->coef, i->pow); i++; j++; } } //handle the remaining items in each list //note: at least one will be equal to end(), but that loop will simply be skipped while (i != poly.end()) { Result.insert(i->coef, i->pow); ++i; } while (j != P.poly.end()) { Result.insert(j->coef, j->pow); ++j; } return Result; } Multiplication: polinom operator*(const polinom& P) const { polinom Result; constIter i, j, lastItem = Result.poly.end(); Iter it1, it2, first, last; int nr_matches; for (i = poly.begin() ; i != poly.end(); i++) { for (j = P.poly.begin(); j != P.poly.end(); j++) Result.insert(i->coef * j->coef, i->pow + j->pow); } Result.poly.sort(SortDescending()); lastItem--; while (true) { nr_matches = 0; for (it1 = Result.poly.begin(); it1 != lastItem; it1++) { first = it1; last = it1; first++; for (it2 = first; it2 != Result.poly.end(); it2++) { if (it2->pow == it1->pow) { it1->coef += it2->coef; nr_matches++; } } nr_matches++; do { last++; nr_matches--; } while (nr_matches != 0); Result.poly.erase(first, last); } if (nr_matches == 0) break; } return Result; } Division(Edited): polinom operator/(const polinom& P) { polinom Result, temp; Iter i = poly.begin(); constIter j = P.poly.begin(); if (poly.size() < 2) { if (i->pow >= j->pow) { Result.insert(i->coef, i->pow - j->pow); *this = *this - Result; } } else { while (true) { if (i->pow >= j->pow) { Result.insert(i->coef, i->pow - j->pow); temp = Result * P; *this = *this - temp; } else break; } } return Result; } The first three are working correctly but division doesn't as it seems the program is in a infinite loop. Update Because no one seems to understand how i thought the algorithm, i'll explain: If the dividend contains only one term, we simply insert the quotient in Result, then we multiply it with the divisor ans subtract it from the first polynomial which stores the remainder. If the polynomial we do this until the second polynomial( P in this case) becomes bigger. I think this algorithm is called long division, isn't it? So based on these, can anyone help me with overloading the / operator correctly for my class? Thanks!

Read the article

Runtime error of TASM language help!

- by dominoos

.model small .stack 400h .data message db "hello. ", 0ah, 0dh, "$" firstdigit db ? seconddigit db ? thirddigit db ? number dw ? newnumber db ? anumber dw 0d bnumber dw 0d Firstn db 0ah, 0dh, "Enter first 3 digit number: ","$" secondn db 0ah, 0dh, "Enter second 3 digit number: ","$" messageB db 0ah, 0dh, "HCF of two number is: ","$" linebreaker db 0ah, 0dh, ' ', 0ah, 0dh, '$' .code Start: mov ax, @data ; establish access to the data segment mov ds, ax ; mov number, 0d mov dx, offset message ; print the string "yob choi 0648293" mov ah, 9h int 21h num: mov dx, offset Firstn ; print the string "put 1st 3 digit" mov ah, 9h int 21h ;run JMP FirstFirst ; jump to FirstFirst FirstFirst: ;first digit mov ah, 1d ;bios code for read a keystroke int 21h ;call bios, it is understood that the ascii code will be returned in al mov firstdigit, al ;may as well save a copy sub al, 30h ;Convert code to an actual integer cbw ;CONVERT BYTE TO WORD. This takes whatever number is in al and ;extends it to ax, doubling its size from 8 bits to 16 bits ;The first digit now occupies all of ax as an integer mov cx, 100d ;This is so we can calculate 100*1st digit +10*2nd digit + 3rd digit mul cx ;start to accumulate the 3 digit number in the variable imul cx ;it is understood that the other operand is ax ; the result will use both dx::ax ;dx will contain only leading zeros add anumber, ax ;save ;Second Digit mov ah, 1d ;bios code for read a keystroke int 21h ;call bios, it is understood that the ascii code will be returned in al mov seconddigit, al ;may as well save a copy sub al, 30h ;Convert code to an actual integer cbw ;CONVERT BYTE TO WORD. This takes whatever number is in al and ;extends it to ax, boubling its size from 8 bits to 16 bits ;The first digit now occupies all of ax as an integer mov cx, 10d ;continue to accumulate the 3 digit number in the variable mul cx ;it is understood that the other operand is ax, containing first digit ;the result will use both dx::ax ;dx will contain only leading zeros. add anumber, ax ;save ;third Digit mov ah, 1d ;samething as above int 21h ; mov thirddigit, al ; sub al, 30h ; cbw ; add anumber, ax ; jmp num2 ;go to checks Num2: mov dx, offset secondn ; print the string "put 2nd 3 digits" mov ah, 9h int 21h ;run JMP SecondSecond SecondSecond: ;first digit mov ah, 1d ;bios code for read a keystroke int 21h ;call bios, it is understood that the ascii code will be returned in al mov firstdigit, al ;may as well save a copy sub al, 30h ;Convert code to an actual integer cbw ;CONVERT BYTE TO WORD. This takes whatever number is in al and ;extends it to ax, doubling its size from 8 bits to 16 bits ;The first digit now occupies all of ax as an integer mov cx, 100d ;This is so we can calculate 100*1st digit +10*2nd digit + 3rd digit mul cx ;start to accumulate the 3 digit number in the variable imul cx ;it is understood that the other operand is ax ; the result will use both dx::ax ;dx will contain only leading zeros add bnumber, ax ;save ;Second Digit mov ah, 1d ;bios code for read a keystroke int 21h ;call bios, it is understood that the ascii code will be returned in al mov seconddigit, al ;may as well save a copy sub al, 30h ;Convert code to an actual integer cbw ;CONVERT BYTE TO WORD. This takes whatever number is in al and ;extends it to ax, boubling its size from 8 bits to 16 bits ;The first digit now occupies all of ax as an integer mov cx, 10d ;continue to accumulate the 3 digit number in the variable mul cx ;it is understood that the other operand is ax, containing first digit ;the result will use both dx::ax ;dx will contain only leading zeros. add bnumber, ax ;save ;third Digit mov ah, 1d ;samething as above int 21h ; mov thirddigit, al ; sub al, 30h ; cbw ; add bnumber, ax ; jmp compare ;go to compare compare: CMP ax, anumber ;comparing numbB and Number JA comp1 ;go to comp1 if anumber is bigger CMP ax, anumber ; JB comp2 ;go to comp2 if anumber is smaller CMP ax, anumber ; JE equal ;go to equal if two numbers are the same JMP compare ;go to compare (avioding error) comp1: SUB ax, anumber; subtract smaller number from bigger number JMP compare ; comp2: SUB anumber, ax; subtract smaller number from bigger number JMP compare ; equal: mov ah, 9d ;make linkbreak after the 2nd 3 digit number mov dx, offset linebreaker int 21h mov ah, 9d ;print "HCF of two number is:" mov dx, offset messageB int 21h mov ax,anumber ;copying 2nd number into ax add al,30h ; converting to ascii mov newnumber,al ; copying from low part of register into newnumb mov ah, 2d ;bios code for print a character mov dl, newnumber ;we had saved the ascii code here int 21h ;call to bios JMP exit; exit: mov ah, 4ch int 21h ;exit the program End hi, this is a program that finds highest common factor of 2 different 3digit number. if i put 200, 235,312 (low numbers) it works fine. but if i put 500, 550, 654(bigger number) the program crashes after the 2nd 3digit number is entered. can you help me to find out what problem is?

Read the article

Tip/Trick: Fix Common SEO Problems Using the URL Rewrite Extension

- by ScottGu

Search engine optimization (SEO) is important for any publically facing web-site. A large % of traffic to sites now comes directly from search engines, and improving your site’s search relevancy will lead to more users visiting your site from search engine queries. This can directly or indirectly increase the money you make through your site. This blog post covers how you can use the free Microsoft URL Rewrite Extension to fix a bunch of common SEO problems that your site might have. It takes less than 15 minutes (and no code changes) to apply 4 simple URL Rewrite rules to your site, and in doing so cause search engines to drive more visitors and traffic to your site. The techniques below work equally well with both ASP.NET Web Forms and ASP.NET MVC based sites. They also works with all versions of ASP.NET (and even work with non-ASP.NET content). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Measuring the SEO of your website with the Microsoft SEO Toolkit A few months ago I blogged about the free SEO Toolkit that we’ve shipped. This useful tool enables you to automatically crawl/scan your site for SEO correctness, and it then flags any SEO issues it finds. I highly recommend downloading and using the tool against any public site you work on. It makes it easy to spot SEO issues you might have in your site, and pinpoint ways to optimize it further. Below is a simple example of a report I ran against one of my sites (www.scottgu.com) prior to applying the URL Rewrite rules I’ll cover later in this blog post: Search Relevancy and URL Splitting Two of the important things that search engines evaluate when assessing your site’s “search relevancy” are: How many other sites link to your content. Search engines assume that if a lot of people around the web are linking to your content, then it is likely useful and so weight it higher in relevancy. The uniqueness of the content it finds on your site. If search engines find that the content is duplicated in multiple places around the Internet (or on multiple URLs on your site) then it is likely to drop the relevancy of the content. One of the things you want to be very careful to avoid when building public facing sites is to not allow different URLs to retrieve the same content within your site. Doing so will hurt with both of the situations above. In particular, allowing external sites to link to the same content with multiple URLs will cause your link-count and page-ranking to be split up across those different URLs (and so give you a smaller page rank than what it would otherwise be if it was just one URL). Not allowing external sites to link to you in different ways sounds easy in theory – but you might wonder what exactly this means in practice and how you avoid it. 4 Really Common SEO Problems Your Sites Might Have Below are 4 really common scenarios that can cause your site to inadvertently expose multiple URLs for the same content. When this happens external sites linking to yours will end up splitting their page links across multiple URLs - and as a result cause you to have a lower page ranking with search engines than you deserve. SEO Problem #1: Default Document IIS (and other web servers) supports the concept of a “default document”. This allows you to avoid having to explicitly specify the page you want to serve at either the root of the web-site/application, or within a sub-directory. This is convenient – but means that by default this content is available via two different publically exposed URLs (which is bad). For example: http://scottgu.com/ http://scottgu.com/default.aspx SEO Problem #2: Different URL Casings Web developers often don’t realize URLs are case sensitive to search engines on the web. This means that search engines will treat the following links as two completely different URLs: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx SEO Problem #3: Trailing Slashes Consider the below two URLs – they might look the same at first, but they are subtly different. The trailing slash creates yet another situation that causes search engines to treat the URLs as different and so split search rankings: http://scottgu.com http://scottgu.com/ SEO Problem #4: Canonical Host Names Sometimes sites support scenarios where they support a web-site with both a leading “www” hostname prefix as well as just the hostname itself. This causes search engines to treat the URLs as different and split search rankling: http://scottgu.com/albums.aspx/ http://www.scottgu.com/albums.aspx/ How to Easily Fix these SEO Problems in 10 minutes (or less) using IIS Rewrite If you haven’t been careful when coding your sites, chances are you are suffering from one (or more) of the above SEO problems. Addressing these issues will improve your search engine relevancy ranking and drive more traffic to your site. The “good news” is that fixing the above 4 issues is really easy using the URL Rewrite Extension. This is a completely free Microsoft extension available for IIS 7.x (on Windows Server 2008, Windows Server 2008 R2, Windows 7 and Windows Vista). The great thing about using the IIS Rewrite extension is that it allows you to fix the above problems *without* having to change any code within your applications. You can easily install the URL Rewrite Extension in under 3 minutes using the Microsoft Web Platform Installer (a free tool we ship that automates setting up web servers and development machines). Just click the green “Install Now” button on the URL Rewrite Spotlight page to install it on your Windows Server 2008, Windows 7 or Windows Vista machine: Once installed you’ll find that a new “URL Rewrite” icon is available within the IIS 7 Admin Tool: Double-clicking the icon will open up the URL Rewrite admin panel – which will display the list of URL Rewrite rules configured for a particular application or site: Notice that our rewrite rule list above is currently empty (which is the default when you first install the extension). We can click the “Add Rule…” link button in the top-right of the panel to add and enable new URL Rewriting logic for our site. Scenario 1: Handling Default Document Scenarios One of the SEO problems I discussed earlier in this post was the scenario where the “default document” feature of IIS causes you to inadvertently expose two URLs for the same content on your site. For example: http://scottgu.com/ http://scottgu.com/default.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the second URL to instead go to the first one. We will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. Let’s look at how we can create such a rule. We’ll begin by clicking the “Add Rule” link in the screenshot above. This will cause the below dialog to display: We’ll select the “Blank Rule” template within the “Inbound rules” section to create a new custom URL Rewriting rule. This will display an empty pane like below: Don’t worry – setting up the above rule is easy. The following 4 steps explain how to do so: Step 1: Name the Rule Our first step will be to name the rule we are creating. Naming it with a descriptive name will make it easier to find and understand later. Let’s name this rule our “Default Document URL Rewrite” rule: Step 2: Setup the Regular Expression that Matches this Rule Our second step will be to specify a regular expression filter that will cause this rule to execute when an incoming URL matches the regex pattern. Don’t worry if you aren’t good with regular expressions - I suck at them too. The trick is to know someone who is good at them or copy/paste them from a web-site. Below we are going to specify the following regular expression as our pattern rule: (.*?)/?Default\.aspx$ This pattern will match any URL string that ends with Default.aspx. The "(.*?)" matches any preceding character zero or more times. The "/?" part says to match the slash symbol zero or one times. The "$" symbol at the end will ensure that the pattern will only match strings that end with Default.aspx. Combining all these regex elements allows this rule to work not only for the root of your web site (e.g. http://scottgu.com/default.aspx) but also for any application or subdirectory within the site (e.g. http://scottgu.com/photos/default.aspx. Because the “ignore case” checkbox is selected it will match both “Default.aspx” as well as “default.aspx” within the URL. One nice feature built-into the rule editor is a “Test pattern” button that you can click to bring up a dialog that allows you to test out a few URLs with the rule you are configuring: Above I've added a “products/default.aspx” URL and clicked the “Test” button. This will give me immediate feedback on whether the rule will execute for it. Step 3: Setup a Permanent Redirect Action We’ll then setup an action to occur when our regular expression pattern matches the incoming URL: In the dialog above I’ve changed the “Action Type” drop down to be a “Redirect” action. The “Redirect Type” will be a HTTP 301 Permanent redirect – which means search engines will follow it. I’ve also set the “Redirect URL” property to be: {R:1}/ This indicates that we want to redirect the web client requesting the original URL to a new URL that has the originally requested URL path - minus the "Default.aspx" in it. For example, requests for http://scottgu.com/default.aspx will be redirected to http://scottgu.com/, and requests for http://scottgu.com/photos/default.aspx will be redirected to http://scottgu.com/photos/ The "{R:N}" regex construct, where N >= 0, is called a back-reference and N is the back-reference index. In the case of our pattern "(.*?)/?Default\.aspx$", if the input URL is "products/Default.aspx" then {R:0} will contain "products/Default.aspx" and {R:1} will contain "products". We are going to use this {R:1}/ value to be the URL we redirect users to. Step 4: Apply and Save the Rule Our final step is to click the “Apply” button in the top right hand of the IIS admin tool – which will cause the tool to persist the URL Rewrite rule into our application’s root web.config file (under a <system.webServer/rewrite> configuration section): <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Because IIS 7.x and ASP.NET share the same web.config files, you can actually just copy/paste the above code into your web.config files using Visual Studio and skip the need to run the admin tool entirely. This also makes adding/deploying URL Rewrite rules with your ASP.NET applications really easy. Step 5: Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com/ http://scottgu.com/default.aspx Notice that the second URL automatically redirects to the first one. Because it is a permanent redirect, search engines will follow the URL and should update the page ranking of http://scottgu.com to include links to http://scottgu.com/default.aspx as well. Scenario 2: Different URL Casing Another common SEO problem I discussed earlier in this post is that URLs are case sensitive to search engines on the web. This means that search engines will treat the following links as two completely different URLs: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL to instead go to the second (all lower-case) one. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: Unlike the previous scenario (where we created a “Blank Rule”), with this scenario we can take advantage of a built-in “Enforce lowercase URLs” rule template. When we click the “ok” button we’ll see the following dialog which asks us if we want to create a rule that enforces the use of lowercase letters in URLs: When we click the “Yes” button we’ll get a pre-written rule that automatically performs a permanent redirect if an incoming URL has upper-case characters in it – and automatically send users to a lower-case version of the URL: We can click the “Apply” button to use this rule “as-is” and have it apply to all incoming URLs to our site. Because my www.scottgu.com site uses ASP.NET Web Forms, I’m going to make one small change to the rule we generated above – which is to add a condition that will ensure that URLs to ASP.NET’s built-in “WebResource.axd” handler are excluded from our case-sensitivity URL Rewrite logic. URLs to the WebResource.axd handler will only come from server-controls emitted from my pages – and will never be linked to from external sites. While my site will continue to function fine if we redirect these URLs to automatically be lower-case – doing so isn’t necessary and will add an extra HTTP redirect to many of my pages. The good news is that adding a condition that prevents my URL Rewriting rule from happening with certain URLs is easy. We simply need to expand the “Conditions” section of the form above We can then click the “Add” button to add a condition clause. This will bring up the “Add Condition” dialog: Above I’ve entered {URL} as the Condition input – and said that this rule should only execute if the URL does not match a regex pattern which contains the string “WebResource.axd”. This will ensure that WebResource.axd URLs to my site will be allowed to execute just fine without having the URL be re-written to be all lower-case. Note: If you have static resources (like references to .jpg, .css, and .js files) within your site that currently use upper-case characters you’ll probably want to add additional condition filter clauses so that URLs to them also don’t get redirected to be lower-case (just add rules for patterns like .jpg, .gif, .js, etc). Your site will continue to work fine if these URLs get redirected to be lower case (meaning the site won’t break) – but it will cause an extra HTTP redirect to happen on your site for URLs that don’t need to be redirected for SEO reasons. So setting up a condition clause makes sense to add. When I click the “ok” button above and apply our lower-case rewriting rule the admin tool will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx Notice that the first URL (which has a capital “A”) automatically does a redirect to a lower-case version of the URL. Scenario 3: Trailing Slashes Another common SEO problem I discussed earlier in this post is the scenario of trailing slashes within URLs. The trailing slash creates yet another situation that causes search engines to treat the URLs as different and so split search rankings: http://scottgu.com http://scottgu.com/ We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL (that does not have a trailing slash) to instead go to the second one that does. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: The URL Rewrite admin tool has a built-in “Append or remove the trailing slash symbol” rule template. When we select it and click the “ok” button we’ll see the following dialog which asks us if we want to create a rule that automatically redirects users to a URL with a trailing slash if one isn’t present: Like within our previous lower-casing rewrite rule we’ll add one additional condition clause that will exclude WebResource.axd URLs from being processed by this rule. This will avoid an unnecessary redirect for happening for those URLs. When we click the “OK” button we’ll get a pre-written rule that automatically performs a permanent redirect if the URL doesn’t have a trailing slash – and if the URL is not processed by either a directory or a file. This will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> <rule name="Trailing Slash" stopProcessing="true"> <match url="(.*[^/])$" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com http://scottgu.com/ Notice that the first URL (which has no trailing slash) automatically does a redirect to a URL with the trailing slash. Because it is a permanent redirect, search engines will follow the URL and update the page ranking. Scenario 4: Canonical Host Names The final SEO problem I discussed earlier are scenarios where a site works with both a leading “www” hostname prefix as well as just the hostname itself. This causes search engines to treat the URLs as different and split search rankling: http://www.scottgu.com/albums.aspx http://scottgu.com/albums.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL (that has a www prefix) to instead go to the second URL. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: The URL Rewrite admin tool has a built-in “Canonical domain name” rule template. When we select it and click the “ok” button we’ll see the following dialog which asks us if we want to create a redirect rule that automatically redirects users to a primary host name URL: Above I’m entering the primary URL address I want to expose to the web: scottgu.com. When we click the “OK” button we’ll get a pre-written rule that automatically performs a permanent redirect if the URL has another leading domain name prefix. This will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Cannonical Hostname"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^scottgu\.com$" negate="true" /> </conditions> <action type="Redirect" url="http://scottgu.com/{R:1}" /> </rule> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> <rule name="Trailing Slash" stopProcessing="true"> <match url="(.*[^/])$" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://www.scottgu.com/albums.aspx http://scottgu.com/albums.aspx Notice that the first URL (which has the “www” prefix) now automatically does a redirect to the second URL which does not have the www prefix. Because it is a permanent redirect, search engines will follow the URL and update the page ranking. 4 Simple Rules for Improved SEO The above 4 rules are pretty easy to setup and should take less than 15 minutes to configure on existing sites you already have. The beauty of using a solution like the URL Rewrite Extension is that you can take advantage of it without having to change code within your web-site – and without having to break any existing links already pointing at your site. Users who follow existing links will be automatically redirected to the new URLs you wish to publish. And search engines will start to give your site a higher search relevancy ranking – which will list your site higher in search results and drive more traffic to it. Customizing your URL Rewriting rules further is easy to-do either by editing the web.config file directly, or alternatively, just double click the URL Rewrite icon within the IIS 7.x admin tool and it will list all the active rules for your web-site or application: Clicking any of the rules above will open the rules editor back up and allow you to tweak/customize/save them further. Summary Measuring and improving SEO is something every developer building a public-facing web-site needs to think about and focus on. If you haven’t already, download and use the SEO Toolkit to analyze the SEO of your sites today. New URL Routing features in ASP.NET MVC and ASP.NET Web Forms 4 make it much easier to build applications that have more control over the URLs that are published. Tools like the URL Rewrite Extension that I’ve talked about in this blog post make it much easier to improve the URLs that are published from sites you already have built today – without requiring you to change a lot of code. The URL Rewrite Extension provides a bunch of additional great capabilities – far beyond just SEO - as well. I’ll be covering these additional capabilities more in future blog posts. Hope this helps, Scott

Read the article

Independence Day for Software Components – Loosening Coupling by Reducing Connascence

- by Brian Schroer

Today is Independence Day in the USA, which got me thinking about loosely-coupled “independent” software components. I was reminded of a video I bookmarked quite a while ago of Jim Weirich’s “Grand Unified Theory of Software Design” talk at MountainWest RubyConf 2009. I finally watched that video this morning. I highly recommend it. In the video, Jim talks about software connascence. The dictionary definition of connascence (con-NAY-sense) is: 1. The common birth of two or more at the same time 2. That which is born or produced with another. 3. The act of growing together. The brief Wikipedia page about Connascent Software Components says that: Two software components are connascent if a change in one would require the other to be modified in order to maintain the overall correctness of the system. Connascence is a way to characterize and reason about certain types of complexity in software systems. The term was introduced to the software world in Meilir Page-Jones’ 1996 book “What Every Programmer Should Know About Object-Oriented Design”. The middle third of that book is the author’s proposed graphical notation for describing OO designs. UML became the standard about a year later, so a revised version of the book was published in 1999 as “Fundamentals of Object-Oriented Design in UML”. Weirich says that the third part of the book, in which Page-Jones introduces the concept of connascence “is worth the price of the entire book”. (The price of the entire book, by the way, is not much – I just bought a used copy on Amazon for $1.36, so that was a pretty low-risk investment. I’m looking forward to getting the book and learning about connascence from the original source.) Meanwhile, here’s my summary of Weirich’s summary of Page-Jones writings about connascence: The stronger the form of connascence, the more difficult and costly it is to change the elements in the relationship. Some of the connascence types, ordered from weak to strong are: Connascence of Name Connascence of name is when multiple components must agree on the name of an entity. If you change the name of a method or property, then you need to change all references to that method or property. Duh. Connascence of name is unavoidable, assuming your objects are actually used. My main takeaway about connascence of name is that it emphasizes the importance of giving things good names so you don’t need to go changing them later. Connascence of Type Connascence of type is when multiple components must agree on the type of an entity. I assume this is more of a problem for languages without compilers (especially when used in apps without tests). I know it’s an issue with evil JavaScript type coercion. Connascence of Meaning Connascence of meaning is when multiple components must agree on the meaning of particular values, e.g that “1” means normal customer and “2” means preferred customer. The solution to this is to use constants or enums instead of “magic” strings or numbers, which reduces the coupling by changing the connascence form from “meaning” to “name”. Connascence of Position Connascence of positions is when multiple components must agree on the order of values. This refers to methods with multiple parameters, e.g.: eMailer.Send("[email protected]", "[email protected]", "Your order is complete", "Order completion notification"); The more parameters there are, the stronger the connascence of position is between the component and its callers. In the example above, it’s not immediately clear when reading the code which email addresses are sender and receiver, and which of the final two strings are subject vs. body. Connascence of position could be improved to connascence of type by replacing the parameter list with a struct or class. This “introduce parameter object” refactoring might be overkill for a method with 2 parameters, but would definitely be an improvement for a method with 10 parameters. This points out two “rules” of connascence: The Rule of Degree: The acceptability of connascence is related to the degree of its occurrence. The Rule of Locality: Stronger forms of connascence are more acceptable if the elements involved are closely related. For example, positional arguments in private methods are less problematic than in public methods. Connascence of Algorithm Connascence of algorithm is when multiple components must agree on a particular algorithm. Be DRY – Don’t Repeat Yourself. If you have “cloned” code in multiple locations, refactor it into a common function. Those are the “static” forms of connascence. There are also “dynamic” forms, including… Connascence of Execution Connascence of execution is when the order of execution of multiple components is important. Consumers of your class shouldn’t have to know that they have to call an .Initialize method before it’s safe to call a .DoSomething method. Connascence of Timing Connascence of timing is when the timing of the execution of multiple components is important. I’ll have to read up on this one when I get the book, but assume it’s largely about threading. Connascence of Identity Connascence of identity is when multiple components must reference the entity. The example Weirich gives is when you have two instances of the “Bob” Employee class and you call the .RaiseSalary method on one and then the .Pay method on the other does the payment use the updated salary? Again, this is my summary of a summary, so please be forgiving if I misunderstood anything. Once I get/read the book, I’ll make corrections if necessary and share any other useful information I might learn. See Also: Gregory Brown: Ruby Best Practices Issue #24: Connascence as a Software Design Metric (That link is failing at the time I write this, so I had to go to the Google cache of the page.)

Read the article

World Record Batch Rate on Oracle JD Edwards Consolidated Workload with SPARC T4-2

- by Brian

Oracle produced a World Record batch throughput for single system results on Oracle's JD Edwards EnterpriseOne Day-in-the-Life benchmark using Oracle's SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2. The workload includes both online and batch workload. The SPARC T4-2 server delivered a result of 8,000 online users while concurrently executing a mix of JD Edwards EnterpriseOne Long and Short batch processes at 95.5 UBEs/min (Universal Batch Engines per minute). In order to obtain this record benchmark result, the JD Edwards EnterpriseOne, Oracle WebLogic and Oracle Database 11g Release 2 servers were executed each in separate Oracle Solaris Containers which enabled optimal system resources distribution and performance together with scalable and manageable virtualization. One SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2 utilized only 55% of the available CPU power. The Oracle DB server in a Shared Server configuration allows for optimized CPU resource utilization and significant memory savings on the SPARC T4-2 server without sacrificing performance. This configuration with SPARC T4-2 server has achieved 33% more Users/core, 47% more UBEs/min and 78% more Users/rack unit than the IBM Power 770 server. The SPARC T4-2 server with 2 processors ran the JD Edwards "Day-in-the-Life" benchmark and supported 8,000 concurrent online users while concurrently executing mixed batch workloads at 95.5 UBEs per minute. The IBM Power 770 server with twice as many processors supported only 12,000 concurrent online users while concurrently executing mixed batch workloads at only 65 UBEs per minute. This benchmark demonstrates more than 2x cost savings by consolidating the complete solution in a single SPARC T4-2 server compared to earlier published results of 10,000 users and 67 UBEs per minute on two SPARC T4-2 and SPARC T4-1. The Oracle DB server used mirrored (RAID 1) volumes for the database providing high availability for the data without impacting performance. Performance Landscape JD Edwards EnterpriseOne Day in the Life (DIL) Benchmark Consolidated Online with Batch Workload System Rack Units BatchRate(UBEs/m) Online Users Users /Units Users /Core Version SPARC T4-2 (2 x SPARC T4, 2.85 GHz) 3 95.5 8,000 2,667 500 9.0.2 IBM Power 770 (4 x POWER7, 3.3 GHz, 32 cores) 8 65 12,000 1,500 375 9.0.2 Batch Rate (UBEs/m) — Batch transaction rate in UBEs per minute Configuration Summary Hardware Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 4 x 300 GB 10K RPM SAS internal disk 2 x 300 GB internal SSD 2 x Sun Storage F5100 Flash Arrays Software Configuration: Oracle Solaris 10 Oracle Solaris Containers JD Edwards EnterpriseOne 9.0.2 JD Edwards EnterpriseOne Tools (8.98.4.2) Oracle WebLogic Server 11g (10.3.4) Oracle HTTP Server 11g Oracle Database 11g Release 2 (11.2.0.1) Benchmark Description JD Edwards EnterpriseOne is an integrated applications suite of Enterprise Resource Planning (ERP) software. Oracle offers 70 JD Edwards EnterpriseOne application modules to support a diverse set of business operations. Oracle's Day in the Life (DIL) kit is a suite of scripts that exercises most common transactions of JD Edwards EnterpriseOne applications, including business processes such as payroll, sales order, purchase order, work order, and manufacturing processes, such as ship confirmation. These are labeled by industry acronyms such as SCM, CRM, HCM, SRM and FMS. The kit's scripts execute transactions typical of a mid-sized manufacturing company. The workload consists of online transactions and the UBE – Universal Business Engine workload of 61 short and 4 long UBEs. LoadRunner runs the DIL workload, collects the user’s transactions response times and reports the key metric of Combined Weighted Average Transaction Response time. The UBE processes workload runs from the JD Enterprise Application server. Oracle's UBE processes come as three flavors: Short UBEs < 1 minute engage in Business Report and Summary Analysis, Mid UBEs > 1 minute create a large report of Account, Balance, and Full Address, Long UBEs > 2 minutes simulate Payroll, Sales Order, night only jobs. The UBE workload generates large numbers of PDF files reports and log files. The UBE Queues are categorized as the QBATCHD, a single threaded queue for large and medium UBEs, and the QPROCESS queue for short UBEs run concurrently. Oracle's UBE process performance metric is Number of Maximum Concurrent UBE processes at transaction rate, UBEs/minute. Key Points and Best Practices Two JD Edwards EnterpriseOne Application Servers, two Oracle WebLogic Servers 11g Release 1 coupled with two Oracle Web Tier HTTP server instances and one Oracle Database 11g Release 2 database on a single SPARC T4-2 server were hosted in separate Oracle Solaris Containers bound to four processor sets to demonstrate consolidation of multiple applications, web servers and the database with best resource utilizations. Interrupt fencing was configured on all Oracle Solaris Containers to channel the interrupts to processors other than the processor sets used for the JD Edwards Application server, Oracle WebLogic servers and the database server. A Oracle WebLogic vertical cluster was configured on each WebServer Container with twelve managed instances each to load balance users' requests and to provide the infrastructure that enables scaling to high number of users with ease of deployment and high availability. The database log writer was run in the real time RT class and bound to a processor set. The database redo logs were configured on the raw disk partitions. The Oracle Solaris Container running the Enterprise Application server completed 61 Short UBEs, 4 Long UBEs concurrently as the mixed size batch workload. The mixed size UBEs ran concurrently from the Enterprise Application server with the 8,000 online users driven by the LoadRunner. See Also SPARC T4-2 Server oracle.com OTN JD Edwards EnterpriseOne oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Oracle Fusion Middleware oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 09/30/2012.

Read the article

SQL Server – Undelete a Table and Restore a Single Table from Backup

- by Mladen Prajdic

This post is part of the monthly community event called T-SQL Tuesday started by Adam Machanic (blog|twitter) and hosted by someone else each month. This month the host is Sankar Reddy (blog|twitter) and the topic is Misconceptions in SQL Server. You can follow posts for this theme on Twitter by looking at #TSQL2sDay hashtag. Let me start by saying: This code is a crazy hack that is to never be used unless you really, really have to. Really! And I don’t think there’s a time when you would really have to use it for real. Because it’s a hack there are number of things that can go wrong so play with it knowing that. I’ve managed to totally corrupt one database. :) Oh… and for those saying: yeah yeah.. you have a single table in a file group and you’re restoring that, I say “nay nay” to you. As we all know SQL Server can’t do single table restores from backup. This is kind of a obvious thing due to different relational integrity (RI) concerns. Since we have to maintain that we have to restore all tables represented in a RI graph. For this exercise i say BAH! to those concerns. Note that this method “works” only for simple tables that don’t have LOB and off rows data. The code can be expanded to include those but I’ve tried to leave things “simple”. Note that for this to work our table needs to be relatively static data-wise. This doesn’t work for OLTP table. Products are a perfect example of static data. They don’t change much between backups, pretty much everything depends on them and their table is one of those tables that are relatively easy to accidentally delete everything from. This only works if the database is in Full or Bulk-Logged recovery mode for tables where the contents have been deleted or truncated but NOT when a table was dropped. Everything we’ll talk about has to be done before the data pages are reused for other purposes. After deletion or truncation the pages are marked as reusable so you have to act fast. The best thing probably is to put the database into single user mode ASAP while you’re performing this procedure and return it to multi user after you’re done. How do we do it? We will be using an undocumented but known DBCC commands: DBCC PAGE, an undocumented function sys.fn_dblog and a little known DATABASE RESTORE PAGE option. All tests will be on a copy of Production.Product table in AdventureWorks database called Production.Product1 because the original table has FK constraints that prevent us from truncating it for testing. -- create a duplicate table. This doesn't preserve indexes!SELECT *INTO AdventureWorks.Production.Product1FROM AdventureWorks.Production.Product After we run this code take a full back to perform further testing. First let’s see what the difference between DELETE and TRUNCATE is when it comes to logging. With DELETE every row deletion is logged in the transaction log. With TRUNCATE only whole data page deallocations are logged in the transaction log. Getting deleted data pages is simple. All we have to look for is row delete entry in the sys.fn_dblog output. But getting data pages that were truncated from the transaction log presents a bit of an interesting problem. I will not go into depths of IAM(Index Allocation Map) and PFS (Page Free Space) pages but suffice to say that every IAM page has intervals that tell us which data pages are allocated for a table and which aren’t. If we deep dive into the sys.fn_dblog output we can see that once you truncate a table all the pages in all the intervals are deallocated and this is shown in the PFS page transaction log entry as deallocation of pages. For every 8 pages in the same extent there is one PFS page row in the transaction log. This row holds information about all 8 pages in CSV format which means we can get to this data with some parsing. A great help for parsing this stuff is Peter Debetta’s handy function dbo.HexStrToVarBin that converts hexadecimal string into a varbinary value that can be easily converted to integer tus giving us a readable page number. The shortened (columns removed) sys.fn_dblog output for a PFS page with CSV data for 1 extent (8 data pages) looks like this: -- [Page ID] is displayed in hex format. -- To convert it to readable int we'll use dbo.HexStrToVarBin function found at -- http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx -- This function must be installed in the master databaseSELECT Context, AllocUnitName, [Page ID], DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE [Current LSN] = '00000031:00000a46:007d' The pages at the end marked with 0x00—> are pages that are allocated in the extent but are not part of a table. We can inspect the raw content of each data page with a DBCC PAGE command: -- we need this trace flag to redirect output to the query window.DBCC TRACEON (3604); -- WITH TABLERESULTS gives us data in table format instead of message format-- we use format option 3 because it's the easiest to read and manipulate further onDBCC PAGE (AdventureWorks, 1, 613, 3) WITH TABLERESULTS Since the DBACC PAGE output can be quite extensive I won’t put it here. You can see an example of it in the link at the beginning of this section. Getting deleted data back When we run a delete statement every row to be deleted is marked as a ghost record. A background process periodically cleans up those rows. A huge misconception is that the data is actually removed. It’s not. Only the pointers to the rows are removed while the data itself is still on the data page. We just can’t access it with normal means. To get those pointers back we need to restore every deleted page using the RESTORE PAGE option mentioned above. This restore must be done from a full backup, followed by any differential and log backups that you may have. This is necessary to bring the pages up to the same point in time as the rest of the data. However the restore doesn’t magically connect the restored page back to the original table. It simply replaces the current page with the one from the backup. After the restore we use the DBCC PAGE to read data directly from all data pages and insert that data into a temporary table. To finish the RESTORE PAGE procedure we finally have to take a tail log backup (simple backup of the transaction log) and restore it back. We can now insert data from the temporary table to our original table by hand. Getting truncated data back When we run a truncate the truncated data pages aren’t touched at all. Even the pointers to rows stay unchanged. Because of this getting data back from truncated table is simple. we just have to find out which pages belonged to our table and use DBCC PAGE to read data off of them. No restore is necessary. Turns out that the problems we had with finding the data pages is alleviated by not having to do a RESTORE PAGE procedure. Stop stalling… show me The Code! This is the code for getting back deleted and truncated data back. It’s commented in all the right places so don’t be afraid to take a closer look. Make sure you have a full backup before trying this out. Also I suggest that the last step of backing and restoring the tail log is performed by hand. USE masterGOIF OBJECT_ID('dbo.HexStrToVarBin') IS NULL RAISERROR ('No dbo.HexStrToVarBin installed. Go to http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx and install it in master database' , 18, 1) SET NOCOUNT ONBEGIN TRY DECLARE @dbName VARCHAR(1000), @schemaName VARCHAR(1000), @tableName VARCHAR(1000), @fullBackupName VARCHAR(1000), @undeletedTableName VARCHAR(1000), @sql VARCHAR(MAX), @tableWasTruncated bit; /* THE FIRST LINE ARE OUR INPUT PARAMETERS In this case we're trying to recover Production.Product1 table in AdventureWorks database. My full backup of AdventureWorks database is at e:\AW.bak */ SELECT @dbName = 'AdventureWorks', @schemaName = 'Production', @tableName = 'Product1', @fullBackupName = 'e:\AW.bak', @undeletedTableName = '##' + @tableName + '_Undeleted', @tableWasTruncated = 0, -- copy the structure from original table to a temp table that we'll fill with restored data @sql = 'IF OBJECT_ID(''tempdb..' + @undeletedTableName + ''') IS NOT NULL DROP TABLE ' + @undeletedTableName + ' SELECT *' + ' INTO ' + @undeletedTableName + ' FROM [' + @dbName + '].[' + @schemaName + '].[' + @tableName + ']' + ' WHERE 1 = 0' EXEC (@sql) IF OBJECT_ID('tempdb..#PagesToRestore') IS NOT NULL DROP TABLE #PagesToRestore /* FIND DATA PAGES WE NEED TO RESTORE*/ CREATE TABLE #PagesToRestore ([ID] INT IDENTITY(1,1), [FileID] INT, [PageID] INT, [SQLtoExec] VARCHAR(1000)) -- DBCC PACE statement to run later RAISERROR ('Looking for deleted pages...', 10, 1) -- use T-LOG direct read to get deleted data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) EXEC('USE [' + @dbName + '];SELECT FileID, PageID, ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), ' + 'CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageIDFROM sys.fn_dblog(NULL, NULL)WHERE AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'' ' + 'AND Context IN (''LCX_MARK_AS_GHOST'', ''LCX_HEAP'') AND Operation in (''LOP_DELETE_ROWS''))t');SELECT *FROM #PagesToRestore -- if upper EXEC returns 0 rows it means the table was truncated so find truncated pages IF (SELECT COUNT(*) FROM #PagesToRestore) = 0 BEGIN RAISERROR ('No deleted pages found. Looking for truncated pages...', 10, 1) -- use T-LOG read to get truncated data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) -- dark magic happens here -- because truncation simply deallocates pages we have to find out which pages were deallocated. -- we can find this out by looking at the PFS page row's Description column. -- for every deallocated extent the Description has a CSV of 8 pages in that extent. -- then it's just a matter of parsing it. -- we also remove the pages in the extent that weren't allocated to the table itself -- marked with '0x00-->00' EXEC ('USE [' + @dbName + '];DECLARE @truncatedPages TABLE(DeallocatedPages VARCHAR(8000), IsMultipleDeallocs BIT);INSERT INTO @truncatedPagesSELECT REPLACE(REPLACE(Description, ''Deallocated '', ''Y''), ''0x00-->00 '', ''N'') + '';'' AS DeallocatedPages, CHARINDEX('';'', Description) AS IsMultipleDeallocsFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageID, DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE Context IN (''LCX_PFS'') AND Description LIKE ''Deallocated%'' AND AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'') t;SELECT FileID, PageID , ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT LEFT(PageAndFile, 1) as WasPageAllocatedToTable , SUBSTRING(PageAndFile, 2, CHARINDEX('':'', PageAndFile) - 2 ) as FileID , CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING(PageAndFile, CHARINDEX('':'', PageAndFile) + 1, LEN(PageAndFile))))) as PageIDFROM ( SELECT SUBSTRING(DeallocatedPages, delimPosStart, delimPosEnd - delimPosStart) as PageAndFile, IsMultipleDeallocs FROM ( SELECT *, CHARINDEX('';'', DeallocatedPages)*(N-1) + 1 AS delimPosStart, CHARINDEX('';'', DeallocatedPages)*N AS delimPosEnd FROM @truncatedPages t1 CROSS APPLY (SELECT TOP (case when t1.IsMultipleDeallocs = 1 then 8 else 1 end) ROW_NUMBER() OVER(ORDER BY number) as N FROM master..spt_values) t2 )t)t)tWHERE WasPageAllocatedToTable = ''Y''') SELECT @tableWasTruncated = 1 END DECLARE @lastID INT, @pagesCount INT SELECT @lastID = 1, @pagesCount = COUNT(*) FROM #PagesToRestore SELECT @sql = 'Number of pages to restore: ' + CONVERT(VARCHAR(10), @pagesCount) IF @pagesCount = 0 RAISERROR ('No data pages to restore.', 18, 1) ELSE RAISERROR (@sql, 10, 1) -- If the table was truncated we'll read the data directly from data pages without restoring from backup IF @tableWasTruncated = 0 BEGIN -- RESTORE DATA PAGES FROM FULL BACKUP IN BATCHES OF 200 WHILE @lastID <= @pagesCount BEGIN -- create CSV string of pages to restore SELECT @sql = STUFF((SELECT ',' + CONVERT(VARCHAR(100), FileID) + ':' + CONVERT(VARCHAR(100), PageID) FROM #PagesToRestore WHERE ID BETWEEN @lastID AND @lastID + 200 ORDER BY ID FOR XML PATH('')), 1, 1, '') SELECT @sql = 'RESTORE DATABASE [' + @dbName + '] PAGE = ''' + @sql + ''' FROM DISK = ''' + @fullBackupName + '''' RAISERROR ('Starting RESTORE command:' , 10, 1) WITH NOWAIT; RAISERROR (@sql , 10, 1) WITH NOWAIT; EXEC(@sql); RAISERROR ('Restore DONE' , 10, 1) WITH NOWAIT; SELECT @lastID = @lastID + 200 END /* If you have any differential or transaction log backups you should restore them here to bring the previously restored data pages up to date */ END DECLARE @dbccSinglePage TABLE ( [ParentObject] NVARCHAR(500), [Object] NVARCHAR(500), [Field] NVARCHAR(500), [VALUE] NVARCHAR(MAX) ) DECLARE @cols NVARCHAR(MAX), @paramDefinition NVARCHAR(500), @SQLtoExec VARCHAR(1000), @FileID VARCHAR(100), @PageID VARCHAR(100), @i INT = 1 -- Get deleted table columns from information_schema view -- Need sp_executeSQL because database name can't be passed in as variable SELECT @cols = 'select @cols = STUFF((SELECT '', ['' + COLUMN_NAME + '']''FROM ' + @dbName + '.INFORMATION_SCHEMA.COLUMNSWHERE TABLE_NAME = ''' + @tableName + ''' AND TABLE_SCHEMA = ''' + @schemaName + '''ORDER BY ORDINAL_POSITIONFOR XML PATH('''')), 1, 2, '''')', @paramDefinition = N'@cols nvarchar(max) OUTPUT' EXECUTE sp_executesql @cols, @paramDefinition, @cols = @cols OUTPUT -- Loop through all the restored data pages, -- read data from them and insert them into temp table -- which you can then insert into the orignial deleted table DECLARE dbccPageCursor CURSOR GLOBAL FORWARD_ONLY FOR SELECT [FileID], [PageID], [SQLtoExec] FROM #PagesToRestore ORDER BY [FileID], [PageID] OPEN dbccPageCursor; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; WHILE @@FETCH_STATUS = 0 BEGIN RAISERROR ('---------------------------------------------', 10, 1) WITH NOWAIT; SELECT @sql = 'Loop iteration: ' + CONVERT(VARCHAR(10), @i); RAISERROR (@sql, 10, 1) WITH NOWAIT; SELECT @sql = 'Running: ' + @SQLtoExec RAISERROR (@sql, 10, 1) WITH NOWAIT; -- if something goes wrong with DBCC execution or data gathering, skip it but print error BEGIN TRY INSERT INTO @dbccSinglePage EXEC (@SQLtoExec) -- make the data insert magic happen here IF (SELECT CONVERT(BIGINT, [VALUE]) FROM @dbccSinglePage WHERE [Field] LIKE '%Metadata: ObjectId%') = OBJECT_ID('['+@dbName+'].['+@schemaName +'].['+@tableName+']') BEGIN DELETE @dbccSinglePage WHERE NOT ([ParentObject] LIKE 'Slot % Offset %' AND [Object] LIKE 'Slot % Column %') SELECT @sql = 'USE tempdb; ' + 'IF (OBJECTPROPERTY(object_id(''' + @undeletedTableName + '''), ''TableHasIdentity'') = 1) ' + 'SET IDENTITY_INSERT ' + @undeletedTableName + ' ON; ' + 'INSERT INTO ' + @undeletedTableName + '(' + @cols + ') ' + STUFF((SELECT ' UNION ALL SELECT ' + STUFF((SELECT ', ' + CASE WHEN VALUE = '[NULL]' THEN 'NULL' ELSE '''' + [VALUE] + '''' END FROM ( -- the unicorn help here to correctly set ordinal numbers of columns in a data page -- it's turning STRING order into INT order (1,10,11,2,21 into 1,2,..10,11...21) SELECT [ParentObject], [Object], Field, VALUE, RIGHT('00000' + O1, 6) AS ParentObjectOrder, RIGHT('00000' + REVERSE(LEFT(O2, CHARINDEX(' ', O2)-1)), 6) AS ObjectOrder FROM ( SELECT [ParentObject], [Object], Field, VALUE, REPLACE(LEFT([ParentObject], CHARINDEX('Offset', [ParentObject])-1), 'Slot ', '') AS O1, REVERSE(LEFT([Object], CHARINDEX('Offset ', [Object])-2)) AS O2 FROM @dbccSinglePage WHERE t.ParentObject = ParentObject )t)t ORDER BY ParentObjectOrder, ObjectOrder FOR XML PATH('')), 1, 2, '') FROM @dbccSinglePage t GROUP BY ParentObject FOR XML PATH('') ), 1, 11, '') + ';' RAISERROR (@sql, 10, 1) WITH NOWAIT; EXEC (@sql) END END TRY BEGIN CATCH SELECT @sql = 'ERROR!!!' + CHAR(10) + CHAR(13) + 'ErrorNumber: ' + ERROR_NUMBER() + '; ErrorMessage' + ERROR_MESSAGE() + CHAR(10) + CHAR(13) + 'FileID: ' + @FileID + '; PageID: ' + @PageID RAISERROR (@sql, 10, 1) WITH NOWAIT; END CATCH DELETE @dbccSinglePage SELECT @sql = 'Pages left to process: ' + CONVERT(VARCHAR(10), @pagesCount - @i) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13), @i = @i+1 RAISERROR (@sql, 10, 1) WITH NOWAIT; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; END CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; EXEC ('SELECT ''' + @undeletedTableName + ''' as TableName; SELECT * FROM ' + @undeletedTableName)END TRYBEGIN CATCH SELECT ERROR_NUMBER() AS ErrorNumber, ERROR_MESSAGE() AS ErrorMessage IF CURSOR_STATUS ('global', 'dbccPageCursor') >= 0 BEGIN CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; ENDEND CATCH-- if the table was deleted we need to finish the restore page sequenceIF @tableWasTruncated = 0BEGIN -- take a log tail backup and then restore it to complete page restore process DECLARE @currentDate VARCHAR(30) SELECT @currentDate = CONVERT(VARCHAR(30), GETDATE(), 112) RAISERROR ('Starting Log Tail backup to c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail backup done.', 10, 1) WITH NOWAIT; RAISERROR ('Starting Log Tail restore from c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail restore done.', 10, 1) WITH NOWAIT;END-- The last step is manual. Insert data from our temporary table to the original deleted table The misconception here is that you can do a single table restore properly in SQL Server. You can't. But with little experimentation you can get pretty close to it. One way to possible remove a dependency on a backup to retrieve deleted pages is to quickly run a similar script to the upper one that gets data directly from data pages while the rows are still marked as ghost records. It could be done if we could beat the ghost record cleanup task.

Read the article

Retrieve Performance Data from SOA Infrastructure Database

- by fip

My earlier blog posting shows how to enable, retrieve and interpret BPEL engine performance statistics to aid performance troubleshooting. The strength of BPEL engine statistics at EM is its break down per request. But there are some limitations with the BPEL performance statistics mentioned in that blog posting: The statistics were stored in memory instead of being persisted. To avoid memory overflow, the data are stored to a buffer with limited size. When the statistic entries exceed the limitation, old data will be flushed out to give ways to new statistics. Therefore it can only keep the last X number of entries of data. The statistics 5 hour ago may not be there anymore. The BPEL engine performance statistics only includes latencies. It does not provide throughputs. Fortunately, Oracle SOA Suite runs with the SOA Infrastructure database and a lot of performance data are naturally persisted there. It is at a more coarse grain than the in-memory BPEL Statistics, but it does have its own strengths as it is persisted. Here I would like offer examples of some basic SQL queries you can run against the infrastructure database of Oracle SOA Suite 11G to acquire the performance statistics for a given period of time. You can run it immediately after you modify the date range to match your actual system. 1. Asynchronous/one-way messages incoming rates The following query will show number of messages sent to one-way/async BPEL processes during a given time period, organized by process names and states select composite_name composite, state, count(*) Count from dlv_message where receive_date >= to_timestamp('2012-10-24 21:00:00','YYYY-MM-DD HH24:MI:SS') and receive_date <= to_timestamp('2012-10-24 21:59:59','YYYY-MM-DD HH24:MI:SS') group by composite_name, state order by Count; 2. Throughput of BPEL process instances The following query shows the number of synchronous and asynchronous process instances created during a given time period. It list instances of all states, including the unfinished and faulted ones. The results will include all composites cross all SOA partitions select state, count(*) Count, composite_name composite, component_name,componenttype from cube_instance where creation_date >= to_timestamp('2012-10-24 21:00:00','YYYY-MM-DD HH24:MI:SS') and creation_date <= to_timestamp('2012-10-24 21:59:59','YYYY-MM-DD HH24:MI:SS') group by composite_name, component_name, componenttype order by count(*) desc; 3. Throughput and latencies of BPEL process instances This query is augmented on the previous one, providing more comprehensive information. It gives not only throughput but also the maximum, minimum and average elapse time BPEL process instances. select composite_name Composite, component_name Process, componenttype, state, count(*) Count, trunc(Max(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) MaxTime, trunc(Min(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) MinTime, trunc(AVG(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) AvgTime from cube_instance where creation_date >= to_timestamp('2012-10-24 21:00:00','YYYY-MM-DD HH24:MI:SS') and creation_date <= to_timestamp('2012-10-24 21:59:59','YYYY-MM-DD HH24:MI:SS') group by composite_name, component_name, componenttype, state order by count(*) desc; 4. Combine all together Now let's combine all of these 3 queries together, and parameterize the start and end time stamps to make the script a bit more robust. The following script will prompt for the start and end time before querying against the database: accept startTime prompt 'Enter start time (YYYY-MM-DD HH24:MI:SS)' accept endTime prompt 'Enter end time (YYYY-MM-DD HH24:MI:SS)' Prompt "==== Rejected Messages ===="; REM 2012-10-24 21:00:00 REM 2012-10-24 21:59:59 select count(*), composite_dn from rejected_message where created_time >= to_timestamp('&&StartTime','YYYY-MM-DD HH24:MI:SS') and created_time <= to_timestamp('&&EndTime','YYYY-MM-DD HH24:MI:SS') group by composite_dn; Prompt " "; Prompt "==== Throughput of one-way/asynchronous messages ===="; select state, count(*) Count, composite_name composite from dlv_message where receive_date >= to_timestamp('&StartTime','YYYY-MM-DD HH24:MI:SS') and receive_date <= to_timestamp('&EndTime','YYYY-MM-DD HH24:MI:SS') group by composite_name, state order by Count; Prompt " "; Prompt "==== Throughput and latency of BPEL process instances ====" select state, count(*) Count, trunc(Max(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) MaxTime, trunc(Min(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) MinTime, trunc(AVG(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) AvgTime, composite_name Composite, component_name Process, componenttype from cube_instance where creation_date >= to_timestamp('&StartTime','YYYY-MM-DD HH24:MI:SS') and creation_date <= to_timestamp('&EndTime','YYYY-MM-DD HH24:MI:SS') group by composite_name, component_name, componenttype, state order by count(*) desc;

Read the article

Securing an ADF Application using OES11g: Part 2

- by user12587121

To validate the integration with OES we need a sample ADF Application that is rich enough to allow us to test securing the various ADF elements. To achieve this we can add some items including bounded task flows to the application developed in this tutorial. A sample JDeveloper 11.1.1.6 project is available here. It depends on the Fusion Order Demo (FOD) database schema which is easily created using the FOD build scripts.In the deployment we have chosen to enable only ADF Authentication as we will delegate Authorization, mostly, to OES.The welcome page of the application with all the links exposed looks as follows: The Welcome, Browse Products, Browse Stock and System Administration links go to pages while the Supplier Registration and Update Stock are bounded task flows. The Login link goes to a basic login page and once logged in a link is presented that goes to a logout page. Only the Browse Products and Browse Stock pages are really connected to the database--the other pages and task flows do not really perform any operations on the database. Required Security Policies We make use of a set of test users and roles as decscribed on the welcome page of the application. In order to exercise the different authorization possibilities we would like to enforce the following sample policies: Anonymous users can see the Login, Welcome and Supplier Registration links. They can also see the Welcome page, the Login page and follow the Supplier Registration task flow. They can see the icon adjacent to the Login link indicating whether they have logged in or not. Authenticated users can see the Browse Product page. Only staff granted the right can see the Browse Product page cost price value returned from the database and then only if the value is below a configurable limit. Suppliers and staff can see the Browse Stock links and pages. Customers cannot. Suppliers can see the Update Stock link but only those with the update permission are allowed to follow the task flow that it launches. We could hide the link but leave it exposed here so we can easily demonstrate the method call activity protecting the task flow. Only staff granted the right can see the System Administration link and the System Administration page it accesses. Implementing the required policies In order to secure the application we will make use of the following techniques: EL Expressions and Java backing beans: JSF has the notion of EL expressions to reference data from backing Java classes. We use these to control the presentation of links on the navigation page which respect the security contraints. So a user will not see links that he is not allowed to click on into. These Java backing beans can call on to OES for an authorization decision. Important Note: naturally we would configure the WLS domain where our ADF application is running as an OES WLS SM, which would allow us to efficiently query OES over the PEP API. However versioning conflicts between OES 11.1.1.5 and ADF 11.1.1.6 mean that this is not possible. Nevertheless, we can make use of the OES RESTful gateway technique from this posting in order to call into OES. You can easily create and manage backing beans in Jdeveloper as follows: Custom ADF Phase Listener: ADF extends the JSF page lifecycle flow and allows one to hook into the flow to intercept page rendering. We use this to put a check prior to rendering any protected pages, again calling on to OES via the backing bean. Phase listeners are configured in the adf-settings.xml file. See the MyPageListener.java class in the project. Here, for example, is the code we use in the listener to check for allowed access to the sysadmin page, navigating back to the welcome page if authorization is not granted: if (page != null && (page.equals("/system.jspx") || page.equals("/system"))){ System.out.println("MyPageListener: Checking Authorization for /system"); if (getValue("#{oesBackingBean.UIAccessSysAdmin}").toString().equals("false") ){ System.out.println("MyPageListener: Forcing navigation away from system" + "to welcome"); NavigationHandler nh = fc.getApplication().getNavigationHandler(); nh.handleNavigation(fc, null, "welcome"); } else { System.out.println("MyPageListener: access allowed"); } } Method call activity: our app makes use of bounded task flows to implement the sequence of pages that update the stock or allow suppliers to self register. ADF takes care of ensuring that a bounded task flow can be entered by only one page. So a way to protect all those pages is to make a call to OES in the first activity and then either exit the task flow or continue depending on the authorization decision. The method call returns a String which contains the name of the transition to effect. This is where we configure the method call activity in JDeveloper: We implement each of the policies using the above techniques as follows: Policies 1 and 2: as these policies concern the coarse grained notions of controlling access to anonymous and authenticated users we can make use of the container’s security constraints which can be defined in the web.xml file. The allPages constraint is added automatically when we configure Authentication for the ADF application. We have added the “anonymousss” constraint to allow access to the the required pages, task flows and icons: <security-constraint> <web-resource-collection> <web-resource-name>anonymousss</web-resource-name> <url-pattern>/faces/welcome</url-pattern> <url-pattern>/afr/*</url-pattern> <url-pattern>/adf/*</url-pattern> <url-pattern>/key.png</url-pattern> <url-pattern>/faces/supplier-reg-btf/*</url-pattern> <url-pattern>/faces/supplier_register_complete</url-pattern> </web-resource-collection> </security-constraint> Policy 3: we can place an EL expression on the element representing the cost price on the products.jspx page: #{oesBackingBean.dataAccessCostPrice}. This EL Expression references a method in a Java backing bean that will call on to OES for an authorization decision. In OES we model the authorization requirement by requiring the view permission on the resource /MyADFApp/data/costprice and granting it only to the staff application role. We recover any obligations to determine the limit. Policy 4: is implemented by putting an EL expression on the Browse Stock link #{oesBackingBean.UIAccessBrowseStock} which checks for the view permission on the /MyADFApp/ui/stock resource. The stock.jspx page is protected by checking for the same permission in a custom phase listener—if the required permission is not satisfied then we force navigation back to the welcome page. Policy 5: the Update Stock link is protected with the same EL expression as the Browse Link: #{oesBackingBean.UIAccessBrowseStock}. However the Update Stock link launches a bounded task flow and to protect it the first activity in the flow is a method call activity which will execute an EL expression #{oesBackingBean.isUIAccessSupplierUpdateTransition} to check for the update permission on the /MyADFApp/ui/stock resource and either transition to the next step in the flow or terminate the flow with an authorization error. Policy 6: the System Administration link is protected with an EL Expression #{oesBackingBean.UIAccessSysAdmin} that checks for view access on the /MyADF/ui/sysadmin resource. The system page is protected in the same way at the stock page—the custom phase listener checks for the same permission that protects the link and if not satisfied we navigate back to the welcome page. Testing the Application To test the application: deploy the OES11g Admin to a WLS domain deploy the OES gateway in a another domain configured to be a WLS SM. You must ensure that the jps-config.xml file therein is configured to allow access to the identity store, otherwise the gateway will not b eable to resolve the principals for the requested users. To do this ensure that the following elements appear in the jps-config.xml file: <serviceProvider type="IDENTITY_STORE" name="idstore.ldap.provider" class="oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider"> <description>LDAP-based IdentityStore Provider</description> </serviceProvider> <serviceInstance name="idstore.ldap" provider="idstore.ldap.provider"> <property name="idstore.config.provider" value="oracle.security.jps.wls.internal.idstore.WlsLdapIdStoreConfigProvider"/> <property name="CONNECTION_POOL_CLASS" value="oracle.security.idm.providers.stdldap.JNDIPool"/></serviceInstance> <serviceInstanceRef ref="idstore.ldap"/> download the sample application and change the URL to the gateway in the MyADFApp OESBackingBean code to point to the OES Gateway and deploy the application to an 11.1.1.6 WLS domain that has been extended with the ADF JRF files. You will need to configure the FOD database connection to point your database which contains the FOD schema. populate the OES Admin and OES Gateway WLS LDAP stores with the sample set of users and groups. If you have configured the WLS domains to point to the same LDAP then it would only have to be done once. To help with this there is a directory called ldap_scripts in the sample project with ldif files for the test users and groups. start the OES Admin console and configure the required OES authorization policies for the MyADFApp application and push them to the WLS SM containing the OES Gateway. Login to the MyADFApp as each of the users described on the login page to test that the security policy is correct. You will see informative logging from the OES Gateway and the ADF application to their respective WLS consoles. Congratulations, you may now login to the OES Admin console and change policies that will control the behaviour of your ADF application--change the limit value in the obligation for the cost price for example, or define Role Mapping policies to determine staff access to the system administration page based on user profile attributes. ADF Development Notes Some notes on ADF development which are probably typical gotchas: May need this on WLS startup in order to allow us to overwrite credentials for the database, the signal here is that there is an error trying to access the data base: -Djps.app.credential.overwrite.allowed=true Best to call Bounded Task flows via a CommandLink (as opposed to a go link) as you cannot seem to start them again from a go link, even having completed the task flow correctly with a return activity. Once a bounded task flow (BTF) is initated it must complete correctly via a return activity—attempting to click on any other link whilst in the context of a BTF has no effect. See here for example: When using the ADF Authentication only security approach it seems to be awkward to allow anonymous access to the welcome and registration pages. We can achieve anonymous access using the web.xml security constraint shown above (where no auth-constraint is specified) however it is not clear what needs to be listed in there….for example the /afr/* and /adf/* are in there by trial and error as sometimes the welcome page will not render if we omit those items. I was not able to use the default allPages constraint with for example the anonymous-role or the everyone WLS group in order to be able to allow anonymous access to pages. The ADF security best practice advises placing all pages under the public_html/WEB-INF folder as then ADF will not allow any direct access to the .jspx pages but will only allow acces via a link of the form /faces/welcome rather than /faces/welcome.jspx. This seems like a very good practice to follow as having multiple entry points to data is a source of confusion in a web application (particulary from a security point of view). In Authentication+Authorization mode only pages with a Page definition file are protected. In order to add an emty one right click on the page and choose Go to Page Definition. This will create an empty page definition and now the page will require explicit permission to be seen. It is advisable to give a unique context root via the weblogic.xml for the application, as otherwise the application will clash with any other application with the same context root and it will not deploy

Search Results

Search found 62199 results on 2488 pages for 'first order logic'.

Page 206/2488 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213 | Next Page >

- by Mahdi

- by Lucas

- by Manoj Madhusoodanan

- by Dirk Beckmann

- by Simon Cooper

- by BI Tools Team

- by Zap

- by Khanser

- by Cathal

- by sojyq

- by wilhil

- by sojyq

- by Leo Simon

- by hasanghaforian

- by user74340

- by Cindy

- by nmarun

- by Vlad

- by dominoos

- by ScottGu

- by Brian Schroer

- by Brian

- by Mladen Prajdic

- by fip

- by user12587121

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213 | Next Page >