Search Results

Search found 6815 results on 273 pages for 'micro sd card'.

Page 206/273 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

  • Motherboard Issue - 3 Beep Bios (memory error) despite new RAM

    - by Glenn
    I have an Intel dG43RK motherboard, bought new and sealed, and have tried two different brands and speeds of RAM with a 3-beep BIOS indicating a memory error, which also occurs without RAM installed (as it should). The memory tried is; 1x4GB 1333 Kingston HyperX DDR3 RAM (New and Sealed) 2x4GB Team Elite 1066 DDR3 RAM (New and Sealed) I have tried multiple configurations and seating layouts and still no luck. I also have a GT520 graphics card on board as I dislike in-built graphics in most cases and had it at hand (also new and sealed). The only used parts are the CPU, which worked in my previous tower and was directly taken from the PC into the new set-up and the CPU Fan which will be replaced with a new fan in the foreseeable future once this is resolved. I've run out of ideas myself and any help is appreciated.

    Read the article

  • Audio input problem in Ubuntu 9.10

    - by Andrea Ambu
    My audio input is a mix of my mic output and my sound card output. I'd like it to be just my mic output. I was able to do so in Ubuntu 9.04 but the interface is 9.10 is totally changed and I tried every my creativity was able to think. It's really annoying when talking to other people over the internet because they keep hearing their voice back. I'm not sure I explained it in clear way so I'll give you an example: What I do: I put an mp3 on play or a video on youtube then open a recorder and start to talk on my mic. What happens: both my voice and audio from mp3/youtube get reordered, even if I put headphones volume to 0 (via hardware). What I'd like to happen: Only my voice should be recorded. I'm sure I'm missing some technical term, but that's the problem and I'd like to solve it in Ubuntu 9.10, any idea?

    Read the article

  • NVIDIA Driver Crashing on Custom-Built Windows 7 PC

    - by srunni
    I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

    Read the article

  • Windows 7 random black screen when idle

    - by Omar
    Occasionally, when I'm away from my computer for about 5 minutes, the computer screen will go black and all USB devices (keyboard/mouse) will lose power. Attempting to move the mouse or pressing keys does not 'wake up' the computer. This only started happening a few days ago but I'm not sure what changes I did could have caused this and I uninstalled programs (one by one) I installed before it started happening, but still having the same issue. The one thing I noticed different about my computer since it started happening is i've been getting random survey popups from www.insightexpress.com. I ran Microsoft Security Essentials scan, it picked up some Java related malware, I removed it but still the same issue. I'm running MBAM right now and will run SAS after. Edit: I just updated drivers for motherboard and video card and ran virus scans, still having the same issue.

    Read the article

  • what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

    - by Michael Borgwardt
    When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

    Read the article

  • ubuntu lucid: blank screen AFTER login. Please help!

    - by keisimone
    Hi there, after i did a partial upgrade my screen went blank. I think i used an onboard graphics card but i cannot be sure. Please advise me. i tried Ctrl+Alt+F1 at startup and did a apt-get upgrade and apt-get update. Didn't work. Am very frustrated after spending 3 days to get ubuntu to work for it to kill my screen the moment i did a first update. Please help.

    Read the article

  • Android - Where to store generated bitmaps?

    - by Josh
    I've got an app which dynamically generates anywhere from 6 to 100 small bitmaps for the user to move around the screen in a given session. I currently generate them in onCreate and store them to the sd card, so that after an orientation change I can grab them out of external storage and display them again. However, this takes time (the loading) and I'd like to keep the bitmap references around between lifecyle changes for quicker access. My question is, is there a better place to store my generated bitmaps? I was thinking about creating a static storage library in my base activity, something that would only need to be reloaded when the app is completely removed from memory (shutdown, other apps need resources, 30 minute restart, etc). Ideally, I'd like the user to be able to back out to the title screen, click a "Resume" button, and in onCreate I just have access to those resident bitmap references instead of having to load them from storage again. For this reason I don't think Activity.onRetainNonConfigurationInstance is what I need. Alternatively, is there a better way to handle multiple generated bitmaps than what I'm doing or the plan I described?

    Read the article

  • Motherboard: Intel S5520HCR s1366 SSI EEB

    - by Crazy_Bash
    I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

    Read the article

  • Run a server and local wireless network off my laptop with no internet.

    - by greg
    I'm trying to run a wireless network from my computer so that people in range can connect to the network and hit a website running off my machine. I don't want to enable file sharing or remote access or anything else of that nature. I just want them to be able to connect to the network, type in an IP or domain name in a browser, and be taken to a locally hosted website. No broader internet access needed. Any ideas / links to good tutorials on the subject? Is this something i can achieve with just a wifi card or will need a router?

    Read the article

  • System Lags/Freezes when under high usgage

    - by tom
    I am not sure if its my GPU / Memory or Hard drive thats failing. For example if I'm runnning more than one instance of chrome and running an application that takes up a lot of resources, my system will start to lag and freeze. When I launch Photoshop the GPU feature disables automatically, this also lags when I click on menus and when working on documents in Photoshop. I really dont know where to start, if i should buy a new graphics card or test the memory or could it be my OS drive? System: Windows 7 64bit, ATI Raedeon 5850, Corsair 2x4GB http://i.stack.imgur.com/qqkLZ.jpg

    Read the article

  • What apps are available for smartphone platforms to allow free calling to the UK and other countries? [closed]

    - by Andrew Ferrier
    On the iPhone, I use MagicJack to get completely free calls over WiFi to US numbers. I'm looking for a similar app to enable me to call UK numbers for free on the iPhone. Does anyone know of one? To make this question of broader applicability to everyone, what apps also allow free calling to other countries? Any smartphone platform (iPhone, Android, Blackberry, Windows Phone) could be useful. Note: I'm talking only about apps that allow completely free calling - the Apple app stores at least are full of apps that allow "cheap" calling. Suspicious apps that require credit card numbers upfront, etc., aren't as interesting.

    Read the article

  • No External Sound

    - by Walter
    I have ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal did alsamixer seems to recognize my soundcard, though the driver is not listed in system - admin -hardware drivers, the only driver listed is my graphics card. I have tried several forums and it seems no one is interested in responding to sound issues. Here's hoping it is different here.

    Read the article

  • FreeBSD 9 (amd64) reboot/shutdown process is very slow

    - by nbari
    I have a Dell Poweredge 2900 III with FreeBSD 9 (amd64), the server uses mfi wich handles a raid10, I had to reboot the server, but notice that either when rebooting or shutting down the server, something is going wrong, besides taking to much time to reboot/shutdown, after rebooting I notice that that some ldap instances within some jails could'nt start and this was because the database was corrupted. This make me think that probably something was wrong with the disks or mfi card, but checking the disk array / logs everything seems to be working fine. My set up is something like this: Host server has the minimum base of FreeBSD 9 amd64, within I create some jails, the ones contain services like mysql, email, and some others ldap. With FreeBSD 7 and 8 I didn't notice this behavior but with FreeBSD 9 something is not working well. I did a clean installation of FreeBSD 9 and root filesystem is using ZFS. Attached is an image hoping some one can give me a hint of what to check or any kind of advice. reboot capture screen image

    Read the article

  • Can't run monitor at native 1080p resolution on Windows 7

    - by Rex
    I have a 24" ViewSonic VX2453 monitor that supports 1920x1080p, connected using HDMI. However at that resolution, the desktop goes off the screen. Using the Nvidia control panel, I have to set it to a custom resolution of 1804x1014 to display correctly. The monitor has its drivers properly installed (the correct model name shows up in control panel after installing the drivers), and I'm running 64 bit Win7 Ultimate. I have a GeForce 560 Ti card, if that helps. Why does this happen?

    Read the article

  • suggest AMD machine for software developement [closed]

    - by superb1
    I need a AMD machine (Processor, Motherboard, Ram, HDD ) for software developement .. I will mainly use microsoft visual studio 2010. Operating system would be windows 7 . Suggest decent machine but i dont want to overspend....i guess the rating system of ecommerce websites may help you to suggest !? I want you to suggest from this list : http://www.flipkart.com/computers/components/processor-20246?ref=bae2643a-2cc8-4710-942f-79e7fbc1b416 plz note basic criteria for vs 2010 is 1.6GHz or faster processor 1 GB (32 Bit) Ram 5400 RPM hard disk DirectX 9 capable video card running at 1024 x 768 or higher-resolution

    Read the article

  • Does PCI bus really occupy 1.8GB

    - by Neil
    I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

    Read the article

  • Access RAID configuration in x3550M2

    - by Mike B
    I'm trying to configure RAID in a IBM x3550 M2 server. I can't find any messages on boot about any hotkey to access the configuration utility. I wasn't able either in BIOS. The card is a on board LSI 1068e. I can't find the original CD's shipped with the server, but I downloaded Server Guide 9.21 from IBM web. Booted with that, and only getting stuck at "Windows loading"p. Tried with a 8.? version from a x3550 (M1), but it was less useful. Although I do not consider myself an expert, I'm starting to feel like a newbie luser. Any help?

    Read the article

  • How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

    - by atticus
    I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

    Read the article

  • wireless dropping out

    - by Sam
    My wireless network connection is dropping out and its driving me nuts. It is weird because it happens at totally random intervals and other devices work while my computer has been dropped. Both my USB dongle and wifi card randomly disconnect from the router and I am unable to connect for a couple of minutes. It is especially irritating because two different adapters are failing at the same time, sounds like a software problem to me, but where? Both my laptop and iPod remain connected when the connection drops. What on earth is happening? I doubt its the router because the other devices would disconnect as well.

    Read the article

  • Failover NIC with Windows 7 running Apache Server

    - by Benjamin Jones
    I have a Apache Server running on a Windows 7 Desktop for a internal website (Intranet). I am trying to figure out how I can make this system as failover safe as possible. One thing I want to do is use the 2nd NIC card that is currently disable. I only have one gateway address to my router. I do not have any computer running a Server O/S. If NIC1 crashes by chance(just humor me!), how could NIC2's IP take on the host name (I have mapped in host file) . I don't really care if the static IP of NIC2 changes seeing that the host name is the only thing I need. Could I add two IP's to the host file, with same host email and maybe create some script that will run IF NIC 1 fails? OR is there any failover software that will do this for me?

    Read the article

  • touchscreen in dual monitors but not as primary

    - by bazzjedi
    Hi, I have been looking for information about using a second monitor but thought of using a touchscreen will a touchscreen monitor work in dual set up, but not set up as main monitor which is the question. Can't find any information on this only when others set it has main. only this piece If you mean do the touch screen features still work on the other machine, the answer is yes. Past that, you can even see some of the touch screen features on a non touch screen monitor (just not the multi touch features!) For example, on the taskbar, click (without releasing) on any icon and then drag the mouse up, and you will see that it does the same as using your finger and dragging up. link|flag answered Feb 5 '10 at 15:14 Wil 47.4k125 have hp 2510 main thinking of hp2310ti touchscreen as secondary, grafic card geforce gtx 295- windows 7 professional regards bazzjedi

    Read the article

  • How to provide i18n service for developer and end user

    - by user247245
    Many android applications have quite poor i18n-support, and for an understandable reason, as it adds much work for the developer. From a both intuitive and cultural point of view it would be a good thing if end-users could translate the apps themself, and OTA share the translation, without reinstalling the app itself. In concept; as wikipedia, some add content easily, others only use what's there. It's of course important that the service is as easy as possible to use, both for app-developers, and people willing to transcribe. To keep it simple, this is the solution I'm concidering; Developer perspective: Developer uses a customized setContentView when open activities/layouts that will seach for thanslations of xml-entries. (below) The customized version is provided as a free downloadable library/class..., turning the i18n feature to more or less a one liner. User perspective: User downloads app without any translation As app launches, it checks locale running at phone, and will look for a translated xml-file at shared space in SD. If no or old transcribed xml (above), try to download new from internet-service (ansync). This is all done by library above, no need for intents. Translator perspective: Separate app to provide translations for any app using the i18n service above. (Could be just a webapp), with some form of QA on translators/input. QUESTION: Now, for this to work efficiently, it has to be AeasyAP for the developer to even bother, and the most fluent solution would be a customized version of setContentView, that simply loads the translated values from external xml, instead of the ones in the apk. Is this possible at all, and if not, what's your suggested solutions? (And of course, Happy New Year, feliz ano novo, blwyddyn newydd dda, Gott Nytt År, kontan ane nouvo, szczesliwego nowego roku ...) Regards, /T

    Read the article

  • Mobile Intel 965 vs 4 Series chipset speed differences

    - by graham.reeds
    A client of ours is having a problem panning on a mapping application that we write on their panasonic toughbooks (CF-19's). One of their toughbooks the panning is fairly smooth while on the other it is really slow. Doesn't help that they have all the settings turned up, but I would of thought any reasonably new graphics card (even shared memory) would have more than adequate graphic speed. I am pretty sure that the graphic adapter is to blame, but I can't find anything out about either chipset (level of acceleration, non-problems, etc). All I get is the intel data sheets. The faster panning one is on the Mobile Intel 4 Series Express Chipset while the slower is on the Mobile Intel 965 Express Chipset. Is this expected? Does it sound like a driver problem? They both have the same amount of ram and same cpu.

    Read the article

  • CSS highlight menu item based on page body tags

    - by Sai
    I have a menu, I would like to highlight the sub menu item based on the page they are in. Can I use a div tag with an id on the page, and in css if the id is there then highlight the item. in body <div id="doc3"></div> then in css #doc3 #menu li#subnav-5-1 a I tried this but dosent seem to work. How can I change the style of another element based on id in the page body? menu... <!-- Menu 5 --> <li id="nav-5"><a href="ssslate.do">Micro</a> <ul id="subnav-5"> <li class="subnav-5-1"><a href="asdf.do">Site & Visit</a></li> <li><a href="ss.do">MIC</a></li> <li><a href="ss.do">sss</a></li> </ul> </li> CSS body.nav-5-1 li.subnav-5-1 {background-color:red;} htmlbody <body id=nav-5-body class="nav-5-1"> Thanks

    Read the article

  • xen hotplug can't add vif to eth0: operation not supported

    - by John Tate
    I am new to xen and I am trying to get a domU running but I am having problems with it. I think my network card might not support bridging which is bizarre. This is the error I get when trying to create the domU [root@hyrba ~]# xm create sardis.secusrvr.com.cfg Using config file "/etc/xen/sardis.secusrvr.com.cfg". Error: Device 0 (vif) could not be connected. Hotplug scripts not working. All the xen kernel modules are loaded... xen_pciback 52948 0 xen_gntalloc 6807 0 xen_acpi_processor 5390 1 xen_netback 27155 0 [permanent] xen_blkback 21827 0 [permanent] xen_gntdev 10849 1 xen_evtchn 5215 1 xenfs 3326 1 xen_privcmd 4854 16 xenfs I get this error in /var/log/xen/xen-hotplug.log RTNETLINK answers: Operation not supported can't add vif2.0 to bridge eth0: Operation not supported can't add vif2.0-emu to bridge eth0: Operation not supported

    Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >