Search Results

Search found 6815 results on 273 pages for 'micro sd card'.

Page 207/273 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

    - by atticus
    I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

    Read the article

  • Mac OS X Lion (10.7.3) Virtual Machine?

    - by Ben Hooper
    I have been looking into this for a while and have attempted quite a few "solutions" (hackintosh boot images, universal unlockers, etc) before I gave in and asked for help. I know this is extremely difficult to accomplish, especially with an AMD CPU, but it has been done and it can't hurt to ask. Question Does anyone know of any way to actually get Mac OS X Lion (10.7.3) to boot in VMware Workstation 8.0.2? I know that Mac OS X is heavily dependant on hardware configuration, so I will post my PC's hardware below, if it helps. As far as I know it's only reliant on the CPU, but I will post it all just in case. PC Hardware Motherboard: ASUS M4A77T CPU: AMD Phenom II x4 955 Black Edition Graphics Card: Palit Sonic Platinum nVIDIA Geforce GTX 460 Memory: G-Skill [RipjawsX F3-12800CL9D-8GBXL] 8GB PSU: Arctic Power 700(W) Hard Drive: SAMSUNG HD204UI 2TB Thanks in advance. :)

    Read the article

  • Computer powers off then tries to start up but resets repeatedly.

    - by Sam Holder
    My machine has started shutting itself off after a few minutes on, everything goes off. A few seconds (3-5) after everything has stopped the lights come back on, the cpu fan and gfx card come on again. They spin for a second, then everything goes off again. A few seconds later same things happens again, light come back on, fans spin for a few seconds then go off. This repeats seemingly forever. If I leave it for a while I can power the machine back on for a while and it will boot again. It will then stay on for a little while again before power off. Rinse and repeat. Is this likely to be power supply or something else? The machine has been up and running for a couple of years before this.

    Read the article

  • Intermittent graphics issue

    - by Rob
    An older (~3 year old) PC I have passed on to my younger brother has a Sony 17" LCD monitor and uses on-board Intel GMA 3100 graphics (supports Aero under Windows 7 and no more is required). Recently he has complained to me twice that after booting up the screen looks all 'fuzzy'. Initially I thought maybe he messed up the ClearType settings by mistake, but resetting that did nothing. The only thing that finally worked was changing the resolution to something else temporarily, then setting it back to the original native (highest supported) resolution. The second time this happened the same 'fix' worked. This is happening only intermittently as of now and is not predictable/reproducible. I suspect either the monitor or on-board graphics is dying. How can I check and confirm which of the two it is (or maybe something else you guys can think of)? If it's the on-board graphics, would I be able to keep using the same motherboard with the addition of a cheap PCI-E graphics card?

    Read the article

  • How to provide i18n service for developer and end user

    - by user247245
    Many android applications have quite poor i18n-support, and for an understandable reason, as it adds much work for the developer. From a both intuitive and cultural point of view it would be a good thing if end-users could translate the apps themself, and OTA share the translation, without reinstalling the app itself. In concept; as wikipedia, some add content easily, others only use what's there. It's of course important that the service is as easy as possible to use, both for app-developers, and people willing to transcribe. To keep it simple, this is the solution I'm concidering; Developer perspective: Developer uses a customized setContentView when open activities/layouts that will seach for thanslations of xml-entries. (below) The customized version is provided as a free downloadable library/class..., turning the i18n feature to more or less a one liner. User perspective: User downloads app without any translation As app launches, it checks locale running at phone, and will look for a translated xml-file at shared space in SD. If no or old transcribed xml (above), try to download new from internet-service (ansync). This is all done by library above, no need for intents. Translator perspective: Separate app to provide translations for any app using the i18n service above. (Could be just a webapp), with some form of QA on translators/input. QUESTION: Now, for this to work efficiently, it has to be AeasyAP for the developer to even bother, and the most fluent solution would be a customized version of setContentView, that simply loads the translated values from external xml, instead of the ones in the apk. Is this possible at all, and if not, what's your suggested solutions? (And of course, Happy New Year, feliz ano novo, blwyddyn newydd dda, Gott Nytt År, kontan ane nouvo, szczesliwego nowego roku ...) Regards, /T

    Read the article

  • Why can't I play videos on my Samsung Moment w/Android 2.1 that did play on 1.5?

    - by cpcarroll71
    Hello all. I was directed here by the Google Android Devs Group. I'm still not sure if this is the place I need to be. I've been on forum after forum and asked the same question but no one seems to know the answer or will tell me the REAL correct place to find it. I have a Samsung Moment with Android 2.1. I can not get videos that DID play on Android 1.5 to play on 2.1 now with very few exceptions. I'm not just talking about different videos with the same format, I'm talking about some of the exact same videos that did play in 1.5 will no longer play in 2.1. These are almost all AVI files. If Android doesn't support AVI natively with it's own stock media player then why or how was I able to play these videos flawlessly on 1.5? The way I always played the videos was viewing my SD card, tapping the thumbnail of the video I wanted, and it would automatically open up in the phones media player right away. Now the phone locks up and then eventually gives an error message. Please tell me someone here knows what is going on and if there is a way to fix this. Or if nothing else, tell me where I do need to look to ask this question and find an answer. Thank you.

    Read the article

  • Win XP cannot connect (or see) my wifi network, but can see others

    - by Jorre
    since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

    Read the article

  • CMD file time not always matching windows explorer file time

    - by skyrail
    I have a set of file I need to set the created, modified and last access date to exif date taken value, after a copy between 2 folders (might be fat32 on memory card or ntfs on fixed or usb disk). When I copy a file, the date and time switch to the current date. Then I change all 3 dates manually, either with change attributes in windows explorer or far manager on the command line. To make it faster I wrote a batch script getting original file dates (with php and function stat), building a batch script that invoke nircmd setfiletime for each file. Then I apply this batch to the copied version. The operation is relatively fast and reliable. Unfortunately, a bunch of files have last access and created time different in cmd and windows explorer (1H difference). Very strangely, it happens with dates between november and february, which make the operation unreliable. Why is this happening, and how can I fix it?

    Read the article

  • How to obtain printed page count if no web-gui or driver-gui is available to show it

    - by Macgreggor at your service
    I am curious if windows print servers can keep a count of the printed pages sent to it? Can an individual PC (WinXP+)? Is there some secret command you can send it (with telnet, dos, etc)? I searched & couldn't find any questions similar to this here so lets keep this open-ended for future people who are curious. Is this more suited towards server fault? Maybe, but this is more about printers & local PC's have print servers now-a-days. Anyhow in my situation I have the following printers (yes old) I am curious on page-counts: HP Laserjet 1300 (using some kind of PC-card to LPT/Parallel adapter, then a network adapter on top of that [Netgear PS101 print server]) Canon Faxphone L80 Epson LX-300+

    Read the article

  • Can't Open Up Event Viewer

    - by Erik W
    I just installed a large backlog of Windows Updates (I have Windows 7 Ultimate 64-bit) and now a handful of programs are acting strangely (not opening, crashing, etc) I went to try to diagnose the program using the Event Viewer, but when I open it up I get the error "Microsoft Management Console has Stopped Working" immediately after I double-click on the icon. Is there any way for me to figure out what is going wrong? I have another Windows 7 PC, that I tried to remotely view the logs from, but I got the error "The RPC Server is Unavailable". I'd like to start up the service, but oh wait, I can't open anything in the "Administrative Tools". I'd like not to re-install Windows, as I had just done so a couple months ago after a Windows Update jacked up my graphics card drivers.

    Read the article

  • Recently reloaded computer, now have trailing effect when windows overlap

    - by Tony
    I recently did a clean install of my home machine and I am having a weird graphical error where if I move one window across the top of another it leaves a trail: I have the most recent NVIDIA drivers installed and nothing new is installed on my machine than before the reload (and I never had this issue before). I have two monitors and it happens on both so I'm sure it isn't a hardware issue (the card and my main monitor are also both less than 6 months old) I've also noticed a ripple when scrolling down on web pages which I believe is related. Any ideas what might be causing this and solutions to fix it?

    Read the article

  • Connecting desktop computer to the internet through laptop wifi

    - by Josh
    Due to some home network complications I have had to move my router to a seperate part of the house, therefore the wired network I had set up can no longer work. Before I find the time to go out and buy a Wifi adapter for my desktop PC, I have a laptop that uses a built in Wifi card to connect to my router and this can connect to the internet, and I was wondering if I could somehow access the internet on my desktop PC via my laptop. I'm hoping for a not-so-complex solution as this will only be set up for a few days, but it is quite vital that my desktop computer gets internet access. Does anyone have experience in this sort of thing and can help me out? Thanks.

    Read the article

  • Extremely poor WiFi reception on new desktop

    - by guy
    I just received a new desktop with a built-in WiFi card (Windows 7 Home Premium x64). However, I am only able to receive any WiFi signal when the computer is within 1-2 meters of a router. Even then, the signal is very weak (Windows 7 says it is "poor"). I have tried this with 2 different routers and see similar results. I have somewhere around a dozen other devices that can connect to both routers with greater signal strength (usually full strength) from much, much further away. When I tried calling support I was instructed to reinstall my drivers and attempt to change the WiFi channel of the router. Neither worked. I was then told that the problem was with my routers and that the computer was functioning normally and that it was certainly not a hardware problem. What would be the cause of this and is there anything I can do to fix it?

    Read the article

  • GNOME Screensaver Widgets

    - by Dark Falcon
    Is there a way to add widgets to a Gnome screensaver? I think this can be done with KDE 4, but I've never liked KDE very much. I'm a programmer and comfortable with writing code if needed. I'd like to be able to: See the weather and forecast Control Rhythmbox Use a flash card widget for reviewing musical concepts The reason I want these on the screensaver is that I have login restrictions. I would like to be able to do a very limited subset of activities without having to log in.

    Read the article

  • PHP : How to get specific data from array

    - by Giffary
    Hello! I try to use amazon API using PHP. If I use print_r($parsed_xml->Items->Item->ItemAttributes) it show me some result like SimpleXMLElement Object ( [Binding] = Electronics [Brand] = Canon [DisplaySize] = 2.5 [EAN] = 0013803113662 [Feature] = Array ( [0] = High-powered 20x wide-angle optical zoom with Optical Image Stabilizer [1] = Capture 720p HD movies with stereo sound; HDMI output connector for easy playback on your HDTV [2] = 2.5-inch Vari-Angle System LCD; improved Smart AUTO intelligently selects from 22 predefined shooting situations [3] = DIGIC 4 Image Processor; 12.1-megapixel resolution for poster-size, photo-quality prints [4] = Powered by AA batteries (included); capture images to SD/SDHC memory cards (not included) ) [FloppyDiskDriveDescription] = None [FormFactor] = Rotating [HasRedEyeReduction] = 1 [IsAutographed] = 0 [IsMemorabilia] = 0 [ItemDimensions] = SimpleXMLElement Object ( [Height] = 340 [Length] = 490 [Weight] = 124 [Width] = 350 ) [Label] = Canon [LensType] = Zoom lens [ListPrice] = SimpleXMLElement Object ( [Amount] = 60103 [CurrencyCode] = USD [FormattedPrice] = $601.03 ) [Manufacturer] = Canon [MaximumFocalLength] = 100 [MaximumResolution] = 12.1 [MinimumFocalLength] = 5 [Model] = SX20IS [MPN] = SX20IS [OpticalSensorResolution] = 12.1 [OpticalZoom] = 20 [PackageDimensions] = SimpleXMLElement Object ( [Height] = 460 [Length] = 900 [Weight] = 242 [Width] = 630 ) [PackageQuantity] = 1 [ProductGroup] = Photography [ProductTypeName] = CAMERA_DIGITAL [ProductTypeSubcategory] = point-and-shoot [Publisher] = Canon [Studio] = Canon [Title] = Canon PowerShot SX20IS 12.1MP Digital Camera with 20x Wide Angle Optical Image Stabilized Zoom and 2.5-inch Articulating LCD [UPC] = 013803113662 ) my goal is to get only Feature infomation and I try to use $feature = $parsed_xml->Items->Item->ItemAttributes->Feature it does'not work for me because it just show me the first feature only. How do i get all feature information? please help

    Read the article

  • Are there any 17-20 inch monitors that support displayport?

    - by WildJoe
    I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

    Read the article

  • Unauthorized computer use via keyboard or remote access?

    - by brydaverambo
    I’m suspecting my computer is being used when I’m not at home. This is happening either physically or remotely. My wireless switch is off. Is there any way possible to detect and/or monitor activity without purchasing software? My settings are being changed as well as passwords (Bios PW was changed and I cannot access Bios settings). I connect via the network cable. Is it possible for someone (in range) to connect to my laptop even if the wireless switch is off? This is a Dell Inspiron 1720 with the WLAN 1395 card. Here’s the kicker. When I try to download freeware for monitoring activity, I am not allowed to do this! ????

    Read the article

  • Hyper-V and host-installed hardware devices: can guest VMs access?

    - by gravyface
    Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

    Read the article

  • HD Radeon 6950 cannot run multiple monitors

    - by Bryan S.
    I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

    Read the article

  • Cisco 2900 series router - 3x 3g HWIC - Can you use the same subnet for each HWIC?

    - by Lance
    We host a site with a 2900 series router with 3x 3G-HWIC cards installed. It is hosted with telstra and plugs into our corporate WAN. The card authenticates against radius and advertises a route into the WAN for which subnet it routes for. We have always used the same advertised subnet on each. Telstra have advised us that this could be the cause of some drop out issues whereby some services will work for some people and not for others and are saying effectively that their system will only use one of these at a time even though we can see the interface is online and assigned a WAN IP address. Has anyone out there configured a multi HWIC setup before and if so are they using different subnets for each or the same?

    Read the article

  • putty ssh client become not responding frequently in windows 7

    - by Sankaran
    with celeron processor and 512 MB ram windows 7 takes too much time even to open a folder in windows explorer. I connect to internet with GPRS modem. When I tried to connect with remote linux machine with putty ssh client. The problem is the putty becomes Not responding in 2 or 3 minutes. I've to connect again and putty goes Not responding again. When i tried in Safe mode with networking, GPRS modem is not even detected. the modem is USB data card. Is it possible load USB drive in safe mode of windows 7 or any other possibility to connect with remote machine via ssh

    Read the article

  • Radeon hd 5700 monitor blank until connected HDMI device is started

    - by kaido loor
    Have win7, radeon hd 5700. When both PC monitor and HDMI device (Onkyo 607) are connected to Radeon card, the monitor diplays boot info, "starting windows, etc" but goes blank when "log into windows" should appear. Monitor comes back (w normal screen) if Onkyo and TV are turned on, not before. Multiple monitors is disabled. Really crazy. Any help appreciated. Generally, Onkyo can pick up HDMI signal ok, so at least smth works as intended.

    Read the article

  • High frequency, kernel bypass vs tuning kernels?

    - by Keith
    I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

    Read the article

  • Daemon Tools error (0xc0000006)

    - by Roberts
    I tried to reinstall Windows XP to Windows 7, but I could not install the video card drivers because the driver installation software only works on XP.I have launched the setup program with XP mode. After I installed the setup, I restarted the computer and Windows 7 wasn't booting.But that isn't the problem why I asked this question. The problem is that I have reinstalled my Windows 7 Ultimate to Windows XP SP3 and I wanted to install Dameon Tools.After installation I restarted the PC (as the setup wanted) and when the Daemon Tools launches it shows the error: Application failed to initialize properly (0xc0000006). Click OK to terminate the application.

    Read the article

  • Black screen on Windows 7 right after opening Google Sketchup or Minecraft

    - by Aero
    I get a black screen on Windows 7 right after opening Google Sketchup or Minecraft. I presume there are other applications that cause this too - but I have not tried to open them. The window initially stops responding for a few seconds, before I get a black screen and my Skype call ends abruptly. I have tried waiting for a few minutes but nothing happens. I have to power down my computer and then boot it up again. This is becoming an annoyance, and I don't know what's causing it. Here are my specs, if it helps: My graphics card is an ATI RADEON XPRESS 1100. If you need any more info or if I've missed anything please ask. Thanks :-)

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >