Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 207/306 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

• spurious hardware memory 'errors' on hp dl380 g5's being generated

  - by friedchicken

  Hi All, i've got 2 new HP dl380g5 servers running HP's esxi4 patched to 219382. they have both been patched up to the latest hp firmware levels (firmware cd 8.7) both are running 32gb (4 x 8gb sticks) both servers are showing the same symptoms - the memory lights come on for two (random) dimms on the front of the server and the health led turns red. sometimes the server stays up and running with no problems. othertimes the server locks dead and only a power reset can bring it back. there is nothing showing in the ilo logs and nothing within the vmware hardware monitoring. the memory has been replaced i've got other customers that have been running dl380g5's with out any issues on esx3.5 - this is our first vsphere deployment with them. these are meant to go live soon so any advice would be great. thanks in advance.

  Read the article

• My Network adapter "D-Link DWA-547" is causing windows 7 to freeze up.

  - by Anders

  Any audio playing, and sometimes the program i am using is constantly stuttering and freezing up. I have narrowed the offending hardware down to my: D-Link DWA-547 RangeBooster N650 Desktop Adapter If i disable it in the device manager everything runs fine and smooth. The card works, and gives me super fast internet. But the rest of the system hangs. I have tried installing the card with the drivers from the cd that came with it, i also tried the lates beta drivers from the d-link webpage, but the problem persists. What do i do? I am running windows 7 x64 on a asus p5b motherboard with 2 intel processors.

  Read the article

• FreeNAS/ZFS/Raid-Z slightly different disks

  - by muskratt

  I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

  Read the article

• how to disable moving down on Enter key in Excel 2007?

  - by earlyadopter

  There used to be a check-box in preferences in Excel 2003 to disable moving down on Enter key after you edited a cell. Where could I find that setting in Excel 2007? <whining on>It drives me insane how microsoft trashes users skills and "fingers" memory to make what their new users may be will find easier. What about us, using these products for ten years?<whining off> I want to control moving around with arrow keys, and Enter to only return me from the cell editing mode to navigation, not moving down. I'm not in a data entry business!! I'm analyzing data, editing just few cells time-to-time.

  Read the article

• Manual TRIM Windows 7 on OCZ VERTEX 2 SATA II 2.5" SSD

  - by INTPnerd

  I have an OCZ VERTEX 2 SATA II 2.5" SSD with Windows 7 Professional installed on it. I am pretty sure TRIM is not working because my motherboard is the Asus M2N-SLI (not the Deluxe model) which does not support AHCI mode for the drive. Is there a utility that is compatible with this drive that I could possibly run once a day that would do something similar to a manual TRIM in order to keep the drive performance up? I could not find one specifically for this drive on the OCZ website. I did find a User-Initiated Garbage Collection wiper tool, but it is for a Vertex drive not Vertex 2. I tried to run it, but it said that wiper could not be run for all the drives on this system.

  Read the article

• Python/Lesta.A worm

  - by Hanks

  My Nod32 have been catching something that is apparently identified as Python/Lesta.A worm. No matter how many times I tell Nod32 to delete and quarantine the file, it always re-appear, the situation will repeat about 3-4 times a day. This thing has been creating a folder called "pamela" in one of my drives, it sometimes also creates a "xxx.folder" file, which Nod32 identifies as "Exploit/CodeBase virus". I have Googled, and done pretty much everything related to this: a full scan in safe mode with no networking turned on, and also ran Ad-Aware, SpyBot, SpyHunter, ComboFix and cleaned the registry. Any idea how I can completely get rid of this annoying virus/worm?

  Read the article

• Kickstart Partitioning Configuration

  - by Flo

  I'be been trying to run a kickstart script with the following partition configuration: #Clear the masterboot record zerombr bootloader --location=mbr --driveorder=sda --append=" rhgb crashkernel=auto quiet" # Set up the partitions/logical volumes/logical groups clearpart --all part /boot --fstype=ext4 --asprimary --size=512 --ondisk=sda part swap --size=2048 --fstype=swap --ondisk=sda part pv.01 --fstype=ext4 --grow --size=200 --ondisk=sda part pv.02 --fstype=ext4 --grow --size=200 --ondisk=sdb volgroup VolGroup pv.01 pv.02 --pesize=32768 logvol /opt --fstype=ext4 --name=opt.fs --vgname=VolGroup --size=40000 logvol / --fstype=ext4 --name=root.fs --vgname=VolGroup --size=78000 I have two hard drives and it looks to me like its a really simple configuration. When I run the kickstart I keep getting all these errors that have to do with python files for configuring partitions. The only actual maybe useful piece of information is KeyError /dev/sda/ I tried a number of alterations of this configuration but nothing really worked. Any ideas?

  Read the article

• Creating ISO image of NTFS partition in Ubuntu

  - by Pappai

  Hi, I have a system that has to be formatted often because of the specific use of it (Use it in internet cafe). I have to install the drivers and apps each time. That is a time consuming and cumbersom task for me. I want to install windows, drivers, apps etc. once and create a backup of the entire C:\ drive, and keep it in a linux partition so that I can restore the OS with all the apps & drivers ready to go! I have ubuntu live CD with me and I have created a linux partition (ext4) in the HDD. My question is: How can I create an ISO image of the C:\ drive (ntfs disk) in Ubuntu and store it in the linux partition?

  Read the article

• How to make Microsoft Keyboard special keys run osascript commands on OS X?

  - by t-a-w

  I'm trying to make (1) special key open new terminal window. I bound it to file /Users/taw/bin/new_term, which contains: #!/bin/sh exec osascript -e 'tell application "Terminal" to do script "cd ."' This does the trick, except it also opens a Terminal window with this (even though Terminal.app is configured to always close windows when processes finish): Last login: Thu Mar 11 19:41:29 on ttys000 /Users/taw/bin/new_term ; exit; ~$ /Users/taw/bin/new_term ; exit; tab 1 logout [Process completed] How do I make it all work correctly? (possibly using a way different that what I've been attempting so far)

  Read the article

• I get a consistency y error when I use my second hard drive

  - by Stavros

  I have two hard drives with win8 installed to both of them. Sometimes, when I boot from the second one (with F12 boot-menu and the second drive selection) and later reboot and start my PC from the first one, I get a disk error for a consistency problem. Windows ask for a disk check and after that, I can't anymore boot from the second drive or have access to it. Why this happens and how can I prevent it? What options do I have except from reinstalling windows? Thanks Stavros

  Read the article

• How do I connect to my home's primary wired network through an extra (wireless) router?

  - by Matthew Patrick Cashatt

  Thanks for looking! I have set up a desktop PC in my workshop. The Cat 5 cable connects from this PC to a wireless router which is connected to my home network. The Internet connection is working just fine. However, the "wired" network this is on shows up as a different wired network than the one that the PCs inside my house are connected to. This is a problem because I would like to connect this workshop PC to various shared resources like printers, HD Homerun (cable tv card), shared drives, etc. When I go to "Network and Sharing" and attempt to find the network that the PCs inside my home are connected to, I don't see it. Any help is appreciated. Thanks!

  Read the article

• Having problems with Grub2 booting Ubuntu from my External Hard Drive

  - by anonymous

  I installed Ubuntu on my external hard drive but it won't boot on my laptop. what do i do? i did some reading and traced the source of the problem to grub2. Apparently, grub2 doesn't use the device's UUID, and uses the linux directory instead (/dev/sdf2). This means that whenever i plug my E-HDD into a system that has a different number of drives connected to it, i won't be able to boot without editting the boot command. I don't understand it too well but that's what i got from what i read. Is there anyway to fix this?

  Read the article

• Home Server Restore

  - by Bryan Avery

  I have had to reinstall Home Server on my server and I would now like to restore it back to the state it was the last moment it stopped. I have the hard drive in a state it was last in, which is a small 250 gb hard disk. I have now installed 1.5tb hard disks, and installed a full licenced copy, as the original copy was a trial version. So I'm in a state where I have a new install, I have one of the old drives plugged in, but I can't transfer the old backups across, how do I do this?

  Read the article

• Home Server Restore

  - by Bryan Avery

  I have had to reinstall Home Server on my server and I would now like to restore it back to the state it was the last moment it stopped. I have the hard drive in a state it was last in, which is a small 250 gb hard disk. I have now installed 1.5tb hard disks, and installed a full licenced copy, as the original copy was a trial version. So I'm in a state where I have a new install, I have one of the old drives plugged in, but I can't transfer the old backups across, how do I do this?

  Read the article

• is there any way to lock few Windows Registry enteries

  - by Moorage

  I have seen that most of virus , spyware etc changes few registry files which are linked to boot process or which starts when window loads user settings. Is there any way to lock those files which are linked to start the system like explorer.exe , userinit.exe so that virus at least should not be able to stop the system to start up. Why did'nt microsoft put those registry file separately so that nothing can touches them Now my userinit.exe file is affected and its not letting me logn on to computer. I get blank desktop but system loads during safe mode. I have run anti virus bootable cd but still have not found solution

  Read the article

• aws s3 works with script but not on cron

  - by user3800017

  guys.. My first post ! hope not the last .. I have few bunch of servers on aws ec2 platforms. I made a simple script to backup my custom logs on their s3 storage bucket. The problem is the script works fine .. but I tried to add it to the crontab. And the script executes but not the s3 sync/mv part ! Here is my code: NOW=$(date "+%b_%d_%Y") MY_HOSTNAME=`uname -n` mv /opt/req/req* /opt/req/bkup/ mv /opt/response/res* /opt/req/bkup/ cd /opt/req/bkup/ tar -cvf ${MY_HOSTNAME}_req_bkup_${NOW}.tar re* rm *.txt aws s3 mv /opt/req/bkup/* s3://req `

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• How to debug old initd script under systemd?

  - by Gene Vincent

  I have an older initd script to start my application. It worked fine under older versions of SuSE, but fails on Open SuSE 12.3. The strange thing is cd /etc/init.d ; ./script start works fine. /etc/init.d/script start shows a redirection to systemctl, but doesn't start my application (and also doesn't show any output from the initd script). I don't see any log entries showing me what goes wrong. The only entry I see is in /var/log/messages saying the application was started. How do I debug this ?

  Read the article

• Virtualbox won't run Fedora 10 64 bit iso

  - by David

  I am using VirtualBox on a Ubuntu 10.04 64bit host. I would like to install a Fedora 64bit guest. When I try to run the 64bit live cd, it says "Automatic boot in 10 seconds..." after which I get a blue background with no menu options. I am familiar with Ubuntu but not Fedora. I have been able to install a Fedora 32 bit system just fine. Any suggestions? I am trying to run an rpm that won't run in Ubuntu even using alien. .

  Read the article

• windows 7 is not working with Ubuntu 12.04

  - by Anand Soni

  I have one problem, I am unable to start windows 7 which is installed with Ubuntu 12.04 because I want to utilize all resource in diff. OS. Let me tell you the installation I have done. I have installed everything with USB because my CD ROM is damaged. 1) I have installed Windows 7 in c: then I have installed Ubuntu 12.04 in C: Now when I start my PC it shows list of OS first like -Ubuntu 12.04 -Windows 7 When I click on Windows 7 it do not starts and again shows the list of OS. I have also tried to reinstall the windows 7 using USB but it gives error of something UI or Boot configuration error. Even now Ubuntu 12.04 is also not reinstalling. Now what I want to do is install windows 7 and install ubuntu 12.04 in virtual box so that I can run both system as this is not working. But can't because I can't open Window 7 even can't format my drive. Please suggest something.

  Read the article

• Mac OS X Time Machine Restore - Failure?

  - by Rabe

  I've got an late 2009 macbook pro 13' and yesterday I replaced the native hd (new hd: Hitachi; same form factor). I choosed "Restore from Time Machine" in the options menu on the snow leopard install discs and waited several hours to complete. After an reboot the mac shows up a white screen with apple logo and tiny loading animation. Nothing happens. After another restart; the same. Now I cant boot from CD using the C-Key and I have no idea how to fix that problem.

  Read the article

• Burning iso images with wodim loses 2048 bytes at the end

  - by Grumbel

  If I burn an iso image with: wodim -data dev=/dev/scd0 in.iso and then read it back out with: dd if=/dev/scd0 of=out.iso The resulting files are not identical, out.iso is 2048 bytes shorter then in.iso. What is going on here and how can I fix it? Using Ubuntu 10.04 and Wodim 1.1.10 PS: dd always ends with an Input/output error, not just with this CD, but with all of them. I think its just a limitation of dd, but an explanation why it happens and how to avoid it would be welcome as well.

  Read the article

• "ant" is not recognized as command in Windows

  - by user1294663

  This is my first time developing Android applications. I'm developing an Android app on Eclipse on Windows 7. I would like to run the Android app from the Windows 7 command line interface. I have my Android device connected to the PC. The workspace directory that I use to store the Android project is C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I opened the command line interface and I changed the working directory to the Android workspace directory. cd C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I included Android sdk platform tools directory into the PATH environment variable. c:\Users\admin\Android-sdks\platform-tools Then I entered this into the Windows 7 command line interface: ant debug I have this error message on the cmd: ant is not recognised as an internal or external command, operatable program or batch file. What is the solution to this problem?

  Read the article

• Create intentional border with xrandr

  - by benizi

  Is there a way to tell xrandr "this space intentionally left blank"? I have a laptop that drives its internal display at 1920x1080, but the external monitor I'm using, due to its different aspect ratio, doesn't have that mode. It runs at 1920x1200. So, the basic setup: xrandr \ --output LVDS-1 --mode 1920x1080 \ --output DP-1 --mode 1920x1200 --same-as LVDS-1 [not to scale:] +-----------------------------------+ ¦ ¦ ¦ ¦ (laptop) ¦ (external) ¦ ¦ (LVDS-1) ¦ (DP-1) ¦ ¦ ¦ ¦ ¦ ¦ ¦ +-----------------¦ ¦ (blank...) ¦ ¦ +-----------------+ How can I specify that the 1920x120-sized region below LVDS-1 should be displayed as a black bar that can't be accessed by mouse on DP-1? I tried just coping with --panning 1920x1200+0+0/1920x1080+0+0/0/0/0/120, but I found the screen movement to be very annoying. Update: I found a workaround. (Update 2: changed it to an answer, per suggestion -- workaround doesn't answer the underlying question of leaving space blank.)

  Read the article

• Count the Number of Characters in a Full FIle Path?

  - by Richie086

  I need to be able to count the number of characters in a full path to a file in windows. How I am currently accomplishing this task is as follows: Open a command prompt cd to the directory in question (for example c:\CruiseControl\ProjectArtifacts\ProjectName) type the following command dir /s /b output.csv Open the resulting output.csv file in excel. use the =LEN() function in excel to count the number of characters per row as listed in the output.csv file. Does anyone know of an explorer shell extension, or some 3rd party tool that could preform this function without me having to manipulate the output from dir in excel? Is there some easier way to go about doing this? The root of the issue I am having is the ~260 character file path limit in Windows. I am trying to analyze which paths are approx ~260 characters so I can shorten them to avoid getting this error.

  Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >