Search Results

Search found 5806 results on 233 pages for 'graphics'.

Page 209/233 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• Ubuntu 12.04 lightdm dumps to tty. Cannot start GUI interface when booting off harddrive, but can when booting off usb

  - by user72681

  When booting, lightdm dumps to tty. No GUI interface works- this is after a fresh install of Ubuntu 12.04 where the GUI interface works when running off the USB. I have an NVIDIA Corporation G98 [Quadro NVS 420] graphics card. After I call startx from the terminal it still doesn't work. I get the following in the Xorg.0.log: [ 327.718] (--) NVIDIA(0): Memory: 262144 kBytes [ 327.718] (--) NVIDIA(0): VideoBIOS: 62.98.6f.00.07 [ 327.718] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 327.718] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 327.756] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 420 at PCI:3:0:0 [ 327.756] (--) NVIDIA(0): none [ 327.756] (EE) NVIDIA(0): No display devices found for this X screen. [ 328.010] (II) UnloadModule: "nvidia" [ 328.010] (II) Unloading nvidia [ 328.010] (II) UnloadModule: "wfb" [ 328.010] (II) Unloading wfb [ 328.010] (II) UnloadModule: "fb" [ 328.010] (II) Unloading fb [ 328.011] (EE) Screen(s) found, but none have a usable configuration. [ 328.011] Fatal server error: [ 328.011] no screens found /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting local X display [+0.00s] DEBUG: X server :0 will replace Plymouth [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.02s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.02s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.02s] DEBUG: Launching X Server [+0.02s] DEBUG: Launching process 1074: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+0.02s] DEBUG: Waiting for ready signal from X server :0 [+0.02s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+1.38s] DEBUG: Process 1074 exited with return value 1 [+1.38s] DEBUG: X server stopped [+1.38s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+1.38s] DEBUG: Releasing VT 7 [+1.38s] DEBUG: Stopping Plymouth, X server failed to start [+1.39s] DEBUG: Display server stopped [+1.39s] DEBUG: Stopping display [+1.39s] DEBUG: Display stopped [+1.39s] DEBUG: Stopping X local seat, failed to start a display [+1.39s] DEBUG: Stopping seat [+1.39s] DEBUG: Seat stopped [+1.39s] DEBUG: Required seat has stopped [+1.39s] DEBUG: Stopping display manager [+1.39s] DEBUG: Display manager stopped [+1.39s] DEBUG: Stopping daemon [+1.39s] DEBUG: Exiting with return value 1 /var/log/lightdm/x-0.log X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu Current Operating System: Linux oorn 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b25ab072-077d-40f1-95a4-c7fd66acd2f0 ro reboot=pci quiet splash vt.handoff=7 Build Date: 07 May 2012 11:43:21PM xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 27 12:51:45 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NVIDIA(0): No display devices found for this X screen. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Server terminated with error (1). Closing log file.

  Read the article

• How to fix OpenGL Co-ordinate System in SFML?

  - by Marc Alexander Reed

  My OpenGL setup is somehow configured to work like so: (-1, 1) (0, 1) (1, 1) (-1, 0) (0, 0) (1, 0) (-1, -1) (0, -1) (1, -1) How do I configure it so that it works like so: (0, 0) (SW/2, 0) (SW, 0) (0, SH/2) (SW/2, SH/2) (SW, SH/2) (0, SH) (SW/2, SH) (SW/2, SH) SW as Screen Width. SH as Screen Height. This solution would have to fix the problem of I can't translate significantly(1) on the Z axis. Depth doesn't seem to be working either. The Perspective code I'm using is that of my WORKING GLUT OpenGL code which has a cool 3d grid and camera system etc. But my OpenGL setup doesn't seem to work with SFML. Help me guys. :( Thanks in advance. :) #include <SFML/Window.hpp> #include <SFML/Graphics.hpp> #include <SFML/Audio.hpp> #include <SFML/Network.hpp> #include <SFML/OpenGL.hpp> #include "ResourcePath.hpp" //Mac-only #define _USE_MATH_DEFINES #include <cmath> double screen_width = 640.f; double screen_height = 480.f; int main (int argc, const char **argv) { sf::ContextSettings settings; settings.depthBits = 24; settings.stencilBits = 8; settings.antialiasingLevel = 2; sf::Window window(sf::VideoMode(screen_width, screen_height, 32), "SFML OpenGL", sf::Style::Close, settings); window.setActive(); glEnable(GL_DEPTH_TEST); glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glEnable(GL_NORMALIZE); glEnable(GL_COLOR_MATERIAL); glShadeModel(GL_SMOOTH); glViewport(0, 0, screen_width, screen_height); glMatrixMode(GL_PROJECTION); glLoadIdentity(); //glOrtho(0.0f, screen_width, screen_height, 0.0f, -100.0f, 100.0f); gluPerspective(45.0f, (double) screen_width / (double) screen_height , 0.f, 100.f); glClearColor(0.f, 0.f, 1.f, 0.f); //blue while (window.isOpen()) { sf::Event event; while (window.pollEvent(event)) { switch (event.type) { case sf::Event::Closed: window.close(); break; } switch (event.key.code) { case sf::Keyboard::Escape: window.close(); break; case 'W': break; case 'S': break; case 'A': break; case 'D': break; } } glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glTranslatef(0.f, 0.f, 0.f); glPushMatrix(); glBegin(GL_QUADS); glColor3f(1.f, 0.f, 0.f); glVertex3f(-1.f, 1.f, 0.f); glColor3f(0.f, 1.f, 0.f); glVertex3f(1.f, 1.f, 0.f); glColor3f(1.f, 0.f, 1.f); glVertex3f(1.f, -1.f, 0.f); glColor3f(0.f, 0.f, 1.f); glVertex3f(-1.f, -1.f, 0.f); glEnd(); glPopMatrix(); window.display(); } return EXIT_SUCCESS; }

  Read the article

• xna orbit camera troubles

  - by user17753

  I have a Model named cube to which I load in LoadContent(): cube = Content.Load<Model>("untitled");. In the Draw Method I call DrawModel: private void DrawModel(Model m, Matrix world) { foreach (ModelMesh mesh in m.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.View = camera.View; effect.Projection = camera.Projection; effect.World = world; } mesh.Draw(); } } camera is of the Camera type, a class I've setup. Right now it is instantiated in the initialization section with the graphics aspect ratio and the translation (world) vector of the model, and the Draw loop calls the camera.UpdateCamera(); before drawing the models. class Camera { #region Fields private Matrix view; // View Matrix for Camera private Matrix projection; // Projection Matrix for Camera private Vector3 position; // Position of Camera private Vector3 target; // Point camera is "aimed" at private float aspectRatio; //Aspect Ratio for projection private float speed; //Speed of camera private Vector3 camup = Vector3.Up; #endregion #region Accessors /// <summary> /// View Matrix of the Camera -- Read Only /// </summary> public Matrix View { get { return view; } } /// <summary> /// Projection Matrix of the Camera -- Read Only /// </summary> public Matrix Projection { get { return projection; } } #endregion /// <summary> /// Creates a new Camera. /// </summary> /// <param name="AspectRatio">Aspect Ratio to use for the projection.</param> /// <param name="Position">Target coord to aim camera at.</param> public Camera(float AspectRatio, Vector3 Target) { target = Target; aspectRatio = AspectRatio; ResetCamera(); } private void Rotate(Vector3 Axis, float Amount) { position = Vector3.Transform(position - target, Matrix.CreateFromAxisAngle(Axis, Amount)) + target; } /// <summary> /// Resets Default Values of the Camera /// </summary> private void ResetCamera() { speed = 0.05f; position = target + new Vector3(0f, 20f, 20f); projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, aspectRatio, 0.5f, 100f); CalculateViewMatrix(); } /// <summary> /// Updates the Camera. Should be first thing done in Draw loop /// </summary> public void UpdateCamera() { Rotate(Vector3.Right, speed); CalculateViewMatrix(); } /// <summary> /// Calculates the View Matrix for the camera /// </summary> private void CalculateViewMatrix() { view = Matrix.CreateLookAt(position,target, camup); } I'm trying to create the camera so that it can orbit the center of the model. For a test I am calling Rotate(Vector3.Right, speed); but it rotates almost right but gets to a point where it "flips." If I rotate along a different axis Rotate(Vector3.Up, speed); everything seems OK in that direction. So I guess, can someone tell me what I'm not accounting for in the above code I wrote? Or point me to an example of an orbiting camera that can be fixed on an arbitrary point?

  Read the article

• Free RAM disappears - Memory leak?

  - by Izzy

  On a fresh started system, free reports about 1.5G used RAM (8G RAM alltogether, Ubuntu 12.04 with lightdm and plasma desktop, one konsole window started). Having the apps running I use, it still consumes not more than 2G. However, having the system running for a couple of days, more and more of my free RAM disappears -- without showing up in the list of used apps: while smem --pie=name reports less than 20% used (and 80% being available), everything else says differently. free -m for example reports on about day 7: total used free shared buffers cached Mem: 7459 7013 446 0 178 997 -/+ buffers/cache: 5836 1623 Swap: 9536 296 9240 (so you can see, it's not the buffers or the cache). Today this finally ended with the system crashing completely: the windows manager being gone, apps "hanging in the air" (frameless) -- and a popup notifying me about "too many open files". Syslog reports: kernel: [856738.020829] VFS: file-max limit 752838 reached So I closed those applications I was able to close, and killed X using Ctrl-Alt-backspace. X tried to come up again after that with failsafeX, but was unable to do so as it could no longer detect its configuration. So I switched to a console using Ctrl-Alt-F2, captured all information I could think of (vmstat, free, smem, proc/meminfo, lsof, ps aux), and finally rebooted. X again came up with failsafeX; this time I told it to "recover from my backed-up configuration", then switched to a console and successfully used startx to bring up the graphical environment. I have no real clue to what is causing this issue -- though it must have to do either with X itself, or with some user processes running on X -- as after killing X, free -m output looked like this: total used free shared buffers cached Mem: 7459 2677 4781 0 62 419 -/+ buffers/cache: 2195 5263 Swap: 9536 59 9477 (~3.5GB being freed) -- to compare with the output after a fresh start: total used free shared buffers cached Mem: 7459 1483 5975 0 63 730 -/+ buffers/cache: 689 6769 Swap: 9536 0 9536 Two more helpful outputs are provided by memstat -u. Shortly before the crash: User Count Swap USS PSS RSS mail 1 0 200 207 616 whoopsie 1 764 740 817 2300 colord 1 3200 836 894 2156 root 62 70404 352996 382260 569920 izzy 80 177508 1465416 1519266 1851840 After having X killed: User Count Swap USS PSS RSS mail 1 0 184 188 356 izzy 1 1400 708 739 1080 whoopsie 1 848 668 826 1772 colord 1 3204 804 888 1728 root 62 54876 131708 149950 267860 And after a restart, back in X: User Count Swap USS PSS RSS mail 1 0 212 217 628 whoopsie 1 0 1536 1880 5096 colord 1 0 3740 4217 7936 root 54 0 148668 180911 345132 izzy 47 0 370928 437562 915056 Edit: Just added two graphs from my monitoring system. Interesting to see: everytime when there's a "jump" in memory consumption, CPU peaks as well. Just found this right now -- and it reminds me of another indicator pointing to X itself: Often when returning to my machine and unlocking the screen, I found something doing heavvy work on my CPU. Checking with top, it always turned out to be /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none. So after this long explanation, finally my questions: What could be the possible causes? How can I better identify involved processes/applications? What steps could be taken to avoid this behaviour -- short from rebooting the machine all X days? I was running 8.04 (Hardy) for about 5 years on my old machine, never having experienced the like (always more than 100 days uptime, before rebooting for e.g. kernel updates). This now is a complete new machine with a fresh install of 8.04. In case it matters, some specs: AMD A4-3400 APU with Radeon(tm) HD Graphics, using the open-source ati/radeon driver (so no fglrx installed), 8GB RAM, WDC WD1002FAEX-0 hdd (1TB), Asus F1A75-V Evo mainboard. Ubuntu 12.04 64-bit with KDE4/Plasma. Apps usually open more or less permanently include Evolution, Firefox, konsole (with Midnight Commander running inside, about 4 tabs), and LibreOffice -- plus occasionally Calibre, Gimp and Moneyplex (banking software I'm already using for almost 20 years now, in a version which did fine on Hardy).

  Read the article

• Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

  - by tonyrogerson

  This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

  Read the article

• Planning development when academic research is involved

  - by Another Anonymous User

  Dear fellow programmers, how do you do "software planning" when academic research is involved? And, on a side note, how do you convince your boss that writing software is not like building a house and it's more like writing a novel? The gory details are below. I am in charge of a small dev team working in a research lab. We started developing a software with the purpose of going public one day (i.e. sell and make money off that). Such software depends on, amongst other things, at least two independent research lines: that is, there are at least two Ph.D. candidates that will, hopefully, one day come out with a working implementation of what we need. The main software depends also on other, more concrete resources that we as developers can take care of: graphics rendering, soft bodies deformation, etc. My boss asked me to write the specifications, requirements AND a bloody GANTT chart of the entire project. Faced with the fact that I don't have a clue about the research part, and that such research is fundamental for the software, he said "make assumptions." For the clarity of the argument, he is a professor whose Ph.D. students should come up with the research we need. And he comes from a strictly engineering background: plan everything first, write down specifications and only then write down code that "it's the last part". What I am doing now: I broke down the product in features; each 'feature' is, de facto, a separate product; Each feature is built on top of the previous one; Once a feature (A) has a working prototype the team can start working on the next feature (B), while QA for is being done for A (if money allows, more people can be brought in, etc.); Features that depend on research will come last: by then, hopefully, the research part will be completed (when is still a big question) ; Also, I set the team to use SCRUM for the development of 'version 1.0', due in a few months. This deadline could be set based on reasonable assumptions: we listed all required features, we counted our availability, and we gave a reasonable estimate. So my questions, again, are: How do I make my boss happy while at the same time get something out the door? How do I write specifications for something we -the developers- have no clue whether it's possible to do or not? (We still haven't decided which libraries to use for some tasks; we'll do so when we'll need to) How do I get the requirements for that, given that there are yet no clients nor investors, just lots of interests and promises? How do I get peace in the world? I am sure at least one of my questions will be answered :) ps: I am writing this anonymously since a potential investor might backfire if this is discovered. Hope you'll understand. However I must say I do not like this mentality of 'hiding the truth': this program will likely benefit many, and not being able to talk openly about this (with my name and my reputation attached) feels like censorship. But alas, I care more about your suggestions now.

  Read the article

• How do I use setFilmSize in panda3d to achieve the correct view?

  - by lhk

  I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

  Read the article

• Tessellation Texture Coordinates

  - by Stuart Martin

  Firstly some info - I'm using DirectX 11 , C++ and I'm a fairly good programmer but new to tessellation and not a master graphics programmer. I'm currently implementing a tessellation system for a terrain model, but i have reached a snag. My current system produces a terrain model from a height map complete with multiple texture coordinates, normals, binormals and tangents for rendering. Now when i was using a simple vertex and pixel shader combination everything worked perfectly but since moving to include a hull and domain shader I'm slightly confused and getting strange results. My terrain is a high detail model but the textured results are very large patches of solid colour. My current setup passes the model data into the vertex shader then through the hull into the domain and then finally into the pixel shader for use in rendering. My only thought is that in my hull shader i pass the information into the domain shader per patch and this is producing the large areas of solid colour because each patch has identical information. Lighting and normal data are also slightly off but not as visibly as texturing. Below is a copy of my hull shader that does not work correctly because i think the way that i am passing the data through is incorrect. If anyone can help me out but suggesting an alternative way to get the required data into the pixel shader? or by showing me the correct way to handle the data in the hull shader id be very thankful! cbuffer TessellationBuffer { float tessellationAmount; float3 padding; }; struct HullInputType { float3 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; float3 binormal : BINORMAL; float2 tex2 : TEXCOORD1; }; struct ConstantOutputType { float edges[3] : SV_TessFactor; float inside : SV_InsideTessFactor; }; struct HullOutputType { float3 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; float3 binormal : BINORMAL; float2 tex2 : TEXCOORD1; float4 depthPosition : TEXCOORD2; }; ConstantOutputType ColorPatchConstantFunction(InputPatch<HullInputType, 3> inputPatch, uint patchId : SV_PrimitiveID) { ConstantOutputType output; output.edges[0] = tessellationAmount; output.edges[1] = tessellationAmount; output.edges[2] = tessellationAmount; output.inside = tessellationAmount; return output; } [domain("tri")] [partitioning("integer")] [outputtopology("triangle_cw")] [outputcontrolpoints(3)] [patchconstantfunc("ColorPatchConstantFunction")] HullOutputType ColorHullShader(InputPatch<HullInputType, 3> patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID) { HullOutputType output; output.position = patch[pointId].position; output.tex = patch[pointId].tex; output.tex2 = patch[pointId].tex2; output.normal = patch[pointId].normal; output.tangent = patch[pointId].tangent; output.binormal = patch[pointId].binormal; return output; } Edited to include the domain shader:- [domain("tri")] PixelInputType ColorDomainShader(ConstantOutputType input, float3 uvwCoord : SV_DomainLocation, const OutputPatch<HullOutputType, 3> patch) { float3 vertexPosition; PixelInputType output; // Determine the position of the new vertex. vertexPosition = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.position = mul(float4(vertexPosition, 1.0f), worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); output.depthPosition = output.position; output.tex = patch[0].tex; output.tex2 = patch[0].tex2; output.normal = patch[0].normal; output.tangent = patch[0].tangent; output.binormal = patch[0].binormal; return output; }

  Read the article

• Very slow KVM in Ubuntu 12.04

  - by Guy Fawkes

  I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit windows or other application using the libvirt API. --> <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

  Read the article

• How do I get my character to move after adding to JFrame?

  - by A.K.

  So this is kind of a follow up on my other JPanel question that got resolved by playing around with the Layout... Now my MouseListener allows me to add a new Board(); object from its class, which is the actual game map and animator itself. But since my Board() takes Key Events from a Player Object inside the Board Class, I'm not sure if they are being started. Here's my Frame Class, where SideScroller S is the player object: package OurPackage; //Made By A.K. 5/24/12 //Contains Frame. import java.awt.BorderLayout; import java.awt.Button; import java.awt.CardLayout; import java.awt.Color; import java.awt.Container; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridBagLayout; import java.awt.GridLayout; import java.awt.Image; import java.awt.Rectangle; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import javax.swing.*; import javax.swing.plaf.basic.BasicOptionPaneUI.ButtonActionListener; public class Frame implements MouseListener { public static boolean StartGame = false; JFrame frm = new JFrame("Action-Packed Jack"); ImageIcon img = new ImageIcon(getClass().getResource("/Images/ActionJackTitle.png")); ImageIcon StartImg = new ImageIcon(getClass().getResource("/Images/JackStart.png")); public Image Title; JLabel TitleL = new JLabel(img); public JPanel TitlePane = new JPanel(); public JPanel BoardPane = new JPanel(); JPanel cards; JButton StartB = new JButton(StartImg); Board nBoard = new Board(); static Sound nSound; public Frame() { frm.setLayout(new GridBagLayout()); cards = new JPanel(new CardLayout()); nSound = new Sound("/Sounds/BunchaJazz.wav"); TitleL.setPreferredSize(new Dimension(970, 420)); frm.add(TitleL); frm.add(cards); cards.setSize(new Dimension(150, 45)); cards.setLayout(new GridBagLayout ()); cards.add(StartB); StartB.addMouseListener(this); StartB.setPreferredSize(new Dimension(150, 45)); frm.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frm.setSize(1200, 420); frm.setVisible(true); frm.setResizable(false); frm.setLocationRelativeTo(null); frm.pack(); } public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { public void run() { new Frame(); } }); } public void mouseClicked(MouseEvent e) { nSound.play(); StartB.setContentAreaFilled(false); cards.remove(StartB); frm.remove(TitleL); frm.remove(cards); frm.setLayout(new GridLayout(1, 1)); frm.add(nBoard); //Add Game "Tiles" Or Content. x = 1200 nBoard.setPreferredSize(new Dimension(1200, 420)); cards.revalidate(); frm.validate(); } @Override public void mouseEntered(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseExited(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mousePressed(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseReleased(MouseEvent arg0) { // TODO Auto-generated method stub } }

  Read the article

• Incomplete upgrade 12.04 to 12.10

  - by David

  Everything was running smoothly. Everything had been downloaded from Internet, packages had been installed and a prompt asked for some obsolete programs/files to be removed or kept. After that the computer crashed and and to manually force a shutdown. I turned it on again and surprise I was on 12.10! Still the upgrade was not finished! How can I properly finish that upgrade? Here's the output I got in the command line after following posted instructions: i astrill - Astrill VPN client software i dayjournal - Simple, minimal, digital journal. i gambas2-gb-form - A gambas native form component i gambas2-gb-gtk - The Gambas gtk component i gambas2-gb-gtk-ext - The Gambas extended gtk GUI component i gambas2-gb-gui - The graphical toolkit selector component i gambas2-gb-qt - The Gambas Qt GUI component i gambas2-gb-settings - Gambas utilities class i A gambas2-runtime - The Gambas runtime i google-chrome-stable - The web browser from Google i google-talkplugin - Google Talk Plugin i indicator-keylock - Indicator for Lock Keys i indicator-ubuntuone - Indicator for Ubuntu One synchronization s i A language-pack-kde-zh-hans - KDE translation updates for language Simpl i language-pack-kde-zh-hans-base - KDE translations for language Simplified C i libapt-inst1.4 - deb package format runtime library idA libattica0.3 - a Qt library that implements the Open Coll idA libbabl-0.0-0 - Dynamic, any to any, pixel format conversi idA libboost-filesystem1.46.1 - filesystem operations (portable paths, ite idA libboost-program-options1.46.1 - program options library for C++ idA libboost-python1.46.1 - Boost.Python Library idA libboost-regex1.46.1 - regular expression library for C++ i libboost-serialization1.46.1 - serialization library for C++ idA libboost-signals1.46.1 - managed signals and slots library for C++ idA libboost-system1.46.1 - Operating system (e.g. diagnostics support idA libboost-thread1.46.1 - portable C++ multi-threading i libcamel-1.2-29 - Evolution MIME message handling library i libcmis-0.2-0 - CMIS protocol client library i libcupsdriver1 - Common UNIX Printing System(tm) - Driver l i libdconf0 - simple configuration storage system - runt i libdvdcss2 - Simple foundation for reading DVDs - runti i libebackend-1.2-1 - Utility library for evolution data servers i libecal-1.2-10 - Client library for evolution calendars i libedata-cal-1.2-13 - Backend library for evolution calendars i libedataserver-1.2-15 - Utility library for evolution data servers i libexiv2-11 - EXIF/IPTC metadata manipulation library i libgdu-gtk0 - GTK+ standard dialog library for libgdu i libgdu0 - GObject based Disk Utility Library idA libgegl-0.0-0 - Generic Graphics Library idA libglew1.5 - The OpenGL Extension Wrangler - runtime en i libglew1.6 - OpenGL Extension Wrangler - runtime enviro i libglewmx1.6 - OpenGL Extension Wrangler - runtime enviro i libgnome-bluetooth8 - GNOME Bluetooth tools - support library i libgnomekbd7 - GNOME library to manage keyboard configura idA libgsoap1 - Runtime libraries for gSOAP i libgweather-3-0 - GWeather shared library i libimobiledevice2 - Library for communicating with the iPhone i libkdcraw20 - RAW picture decoding library i libkexiv2-10 - Qt like interface for the libexiv2 library i libkipi8 - library for apps that want to use kipi-plu i libkpathsea5 - TeX Live: path search library for TeX (run i libmagickcore4 - low-level image manipulation library i libmagickwand4 - image manipulation library i libmarblewidget13 - Marble globe widget library idA libmusicbrainz4-3 - Library to access the MusicBrainz.org data i libnepomukdatamanagement4 - Basic Nepomuk data manipulation interface i libnux-2.0-0 - Visual rendering toolkit for real-time app i libnux-2.0-common - Visual rendering toolkit for real-time app i libpoppler19 - PDF rendering library i libqt3-mt - Qt GUI Library (Threaded runtime version), i librhythmbox-core5 - support library for the rhythmbox music pl i libusbmuxd1 - USB multiplexor daemon for iPhone and iPod i libutouch-evemu1 - KernelInput Event Device Emulation Library i libutouch-frame1 - Touch Frame Library i libutouch-geis1 - Gesture engine interface support i libutouch-grail1 - Gesture Recognition And Instantiation Libr idA libx264-120 - x264 video coding library i libyajl1 - Yet Another JSON Library i linux-headers-3.2.0-29 - Header files related to Linux kernel versi i linux-headers-3.2.0-29-generic - Linux kernel headers for version 3.2.0 on i linux-image-3.2.0-29-generic - Linux kernel image for version 3.2.0 on 64 i mplayerthumbs - video thumbnail generator using mplayer i myunity - Unity configurator i A openoffice.org-calc - office productivity suite -- spreadsheet i A openoffice.org-writer - office productivity suite -- word processo i python-brlapi - Python bindings for BrlAPI i python-louis - Python bindings for liblouis i rts-bpp-dkms - rts-bpp driver in DKMS format. i system76-driver - Universal driver for System76 computers. i systemconfigurator - Unified Configuration API for Linux Instal i systemimager-client - Utilities for creating an image and upgrad i systemimager-common - Utilities and libraries common to both the i systemimager-initrd-template-am - SystemImager initrd template for amd64 cli i touchpad-indicator - An indicator for the touchpad i ubuntu-tweak - Ubuntu Tweak i A unity-lens-utilities - Unity Utilities lens i A unity-scope-calculator - Calculator engine i unity-scope-cities - Cities engine i unity-scope-rottentomatoes - Unity Scope Rottentomatoes

  Read the article

• Antenna Aligner Part 7: Connecting the dots

  - by Chris George

  The app is basically ready, so I eagerly started to sort out creating the application entry in iTunes Connect. It's mostly intuitive actually, although I did have to create yet another icon for iTunes sized 512x512 pixels, damn lucky I did the original graphics as vector! It took me longer to write the application description than anything else, I'm so not a tech author! I didn't like the way you have to 'make up' an SKU (Stock Keeping Unit) number. I have to do some googling to find out that it really doesn't matter what it is! It should be more obvious what to do from the actual website itself. That aside, the rest of it was actually fairly straightforward. As well as the details of the application, iPhone and iPad screenshots were also required. This posed somewhat of a problem. The iPhone ones were easy (as I have one!), but I do not (yet) own an iPad . So I thought I'd leave the iPad screenshots out for now. Once the application details were sorted, I moved onto the rights and pricing. At the start of the project I had made the decision that I wouldn't charge any more than the lowest amount £0.59. I believe there is a market for this, but as my first foray into app development I didn't want to take the mick. I did realise, however, that I had built my app with a developer certificate and provisioning profile. This was fairly quickly corrected, and again Nomad made this very easy to switch over to the distribution certificate and provisioning profile. With a sense of excitement I cracked open iTunes connect and clicked the upload button ... ...slight snag... . when the Nomad project was started, Apple allowed uploads of these binaries via iTunes Connect. But this is no longer possible, the only upload path is via the Application Loader available from the Apple Developer program. This itself has one limitation, it only runs on a mac! D'OH!!!  Actually my language was somewhat more colourful when this fact came to light. After picking my laptop up off the floor and putting it back together... ok only joking, but I did nearly throw it out of frustration!... I started to consider the options; I briefly entertained the idea of buying a cheap mac from ebay... no, that defeats the whole object of what I'm doing, plus my wife wouldn't be impressed there are some guys out there in the interweb who will upload your app for a small fee...but I don't really like the idea of giving some faceless email address my apple developer login details, as well as my app binary! find some willing friend with a mac who would kindly let me use it... obviously this is the only sensible option. In the meantime, I informed the Nomad team about this slight 'issue' and they are currently investigating possible solutions...

  Read the article

• Errors when trying to compile the driver for the rtl8192su wireless adapter

  - by Tom Brito

  I have a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g sudo lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) sudo lsusb Bus 002 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1 Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer, Inc. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Slick2D Rendering Lots of Polygons

  - by Hazzard

  I'm writing an little isometric game using Slick. The world terrain is made up of lots of quadrilaterals. In a small world that is 128 by 128 squares, over 16,000 quadrilaterals need to be rendered. This puts my pretty powerful computer down to 30 fps. I've though about caching "chunks" of the world so only single chunks would ever need updating at a time, but I don't know how to do this, and I am sure there are other ways to optimize it besides that. Maybe I'm doing the whole thing wrong, surely fancy 3D games that run fine on my machine are more intensive than this. My question is how can I improve the FPS and am I doing something wrong? Or does it actually take that much power to render those polygons? -- Here is the source code for the render method in my game state. It iterates through a 2d array or heights and draws polygons based on the height. public void render(GameContainer container, StateBasedGame game, Graphics gfx) throws SlickException { gfx.translate(offsetX * d + container.getWidth() / 2, offsetY * d + container.getHeight() / 2); gfx.scale(d, d); for (int y = 0; y < placeholder.length; y++) {// x & y are isometric // diag for (int x = 0; x < placeholder[0].length; x++) { Polygon poly; int hor = TestState.TILE_WIDTH * (x - y);// hor and ver are orthagonal int W = TestState.TILE_HEIGHT * (x + y) - 1 * heights[y + 1][x];//points to go off of int S = TestState.TILE_HEIGHT * (x + y) - 1 * heights[y + 1][x + 1]; int E = TestState.TILE_HEIGHT * (x + y) - 1 * heights[y][x + 1]; int N = TestState.TILE_HEIGHT * (x + y) - 1 * heights[y][x]; if (placeholder[y][x] == null) { poly = new Polygon();//Create actual surface polygon poly.addPoint(-TestState.TILE_WIDTH + hor, W); poly.addPoint(hor, S + TestState.TILE_HEIGHT); poly.addPoint(TestState.TILE_WIDTH + hor, E); poly.addPoint(hor, N - TestState.TILE_HEIGHT); float z = ((float) heights[y][x + 1] - heights[y + 1][x]) / 32 + 0.5f; placeholder[y][x] = new Tile(poly, new Color(z, z, z)); //ShapeRenderer.fill(placeholder[y][x]); } if (true) {//ONLY draw tile if it's on screen gfx.setColor(placeholder[y][x].getColor()); ShapeRenderer.fill(placeholder[y][x]); //gfx.fill(placeholder[y][x]); //placeholder[y][x]. //DRAW EDGES if (y + 1 == placeholder.length) {//draw South foundation edges gfx.setColor(Color.gray); Polygon found = new Polygon(); found.addPoint(-TestState.TILE_WIDTH + hor, W); found.addPoint(hor, S + TestState.TILE_HEIGHT); found.addPoint(hor, TestState.TILE_HEIGHT * (x + y + 1)); found.addPoint(-TestState.TILE_WIDTH + hor, TestState.TILE_HEIGHT * (x + y)); gfx.fill(found); } if (x + 1 == placeholder[0].length) {//north gfx.setColor(Color.darkGray); Polygon found = new Polygon(); found.addPoint(TestState.TILE_WIDTH + hor, E); found.addPoint(hor, S + TestState.TILE_HEIGHT); found.addPoint(hor, TestState.TILE_HEIGHT * (x + y + 1)); found.addPoint(TestState.TILE_WIDTH + hor, TestState.TILE_HEIGHT * (x + y)); gfx.fill(found); }//*/ } } } }

  Read the article

• Going by the eBook

  - by Tony Davis

  The book and magazine publishing world is rapidly going digital, and the industry is faced with making drastic changes to their ways of doing business. The sudden take-up of digital readers by the book-buying public has surprised even the most technological-savvy of the industry. Printed books just aren't selling like they did. In contrast, eBooks are doing well. The ePub file format is the standard around which all publishers are converging. ePub is a standard for formatting book content, so that it can be reflowed for various devices, with their widely differing screen-sizes, and can be read offline. If you unzip an ePub file, you'll find familiar formats such as XML, XHTML and CSS. This is both a blessing and a curse. Whilst it is good to be able to use familiar technologies that have been developed to a level of considerable sophistication, it doesn't get us all the way to producing a viable publication. XHTML is a page-description language, not a book-description language, as we soon found out during our initial experiments, when trying to specify headers, footers, indexes and chaptering. As a result, it is difficult to predict how any particular eBook application will decide to render a book. There isn't even a consensus as to how the cover image is specified. All of this is awkward for the publisher. Each book must be created and revised in a form from which can be generated a whole range of 'printed media', from print books, to Mobi for kindles, ePub for most Tablets and SmartPhones, HTML for excerpted chapters on websites, and a plethora of other formats for other eBook readers, each with its own idiosyncrasies. In theory, if we can get our content into a clean, semantic XML form, such as DOCBOOKS, we can, from there, after every revision, perform a series of relatively simple XSLT transformations to output anything from a HTML article, to an ePub file for reading on an iPad, to an ICML file (an XML-based file format supported by the InDesign tool), ready for print publication. As always, however, the task looks bigger the closer you get to the detail. On the way to the utopian world of an XML-based book format that encompasses all the diverse requirements of the different publication media, ePub looks like a reasonable format to adopt. Its forthcoming support for HTML 5 and CSS 3, with ePub 3.0, means that features, such as widow-and-orphan controls, multi-column flow and multi-media graphics can be incorporated into eBooks. This starts to make it possible to build an "app-like" experience into the eBook and to free publishers to think of putting context before container; to think of what content is required, be it graphical, textual or audio, from the point of view of the user, rather than what's possible in a given, traditional book "Container". In the meantime, there is a gap between what publishers require and what current technology can provide and, of course building this app-like experience is far from plain sailing. Real portability between devices is still a big challenge, and achieving the sort of wizardry seen in the likes of Theodore Grey's "Elements" eBook will require some serious device-specific programming skills. Cheers, Tony.

  Read the article

• saving and retrieving a text file in java?

  - by user3319432

  import java.sql. ; import java.awt.; import javax.swing.; import java.awt.event.; public class saving extends JFrame implements ActionListener{ JTextField edpno=new JTextField(10); JLabel l0= new JLabel ("EDP Number: "); JComboBox fname = new JComboBox(); JLabel l1= new JLabel("First Name: "); JTextField lname= new JTextField(20); JLabel l2= new JLabel("Last Name: "); // JTextField contno= new JTextField(20); // JLabel l3= new JLabel("Contact Number: "); JComboBox contno = new JComboBox(); JLabel l3 = new JLabel ("Contact Number: "); JButton bOK = new JButton("Save"); JButton bRetrieve = new JButton("Retrieve"); private ImageIcon icon; JPanel C=new JPanel(){ protected void paintComponent(Graphics g){ g.drawImage(icon.getImage(),0,0,null); super.paintComponent(g); } }; public Search Record (){ icon=new ImageIcon("images/canres.png"); C.setOpaque(false); C.setLayout(new GridLayout(5,2,4,4)); setTitle("Search Record"); C.add (l0); C.add (edpno); edpno.addActionListener(this); C.add (l1); C.add (fname); fname.setForeground(Color.BLUE); fname.setFont(new Font(" ", Font.BOLD,15)); C.add (l2); C.add (lname); C.add (l3); C.add (contno); contno.setForeground(Color.BLUE); contno.setFont(new Font(" ", Font.BOLD,15)); C.add(bOK); bOK.addActionListener(this); C.add (bRetrieve); bRetrieve.addActionListener(this); bOK.setBackground(Color.white); bRetrieve.setBackground(Color.white); } public void saverecord(){ try{ //Connect to the Database Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); String path ="jdbc:odbc:;DRIVER=Microsoft Access Driver (*.mdb);DBQ=Database/roomassign.mdb"; String DBPassword =""; String DBUserName =""; Connection con = DriverManager.getConnection(path,"",""); Statement s = con.createStatement(); s.executeQuery("select firstname, Lastname, contact number from name WHERE edpno ='"+edpno.getText()+"'"); ResultSet rs = s.getResultSet(); ResultSetMetaData md = rs.getMetaData(); while(rs.next()) { fname.setSelectedItem(rs.getString(1)); lname.setText(rs.getString(2)); contno.setSelectedItem(rs.getString(3)); // crs.setSelectedItem(rs.getString(4)); } s.close(); con.close(); } catch(Exception Q) { JOptionPane.showMessageDialog(this,Q); } } public void SaveRecord(){ try{ Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); String path = "jdbc:odbc:;DRIVER=Microsoft Access Driver (*.mdb);DBQ=Database/roomassign.mdb"; String DBPassword =""; String DBUsername =""; Connection con = DriverManager.getConnection(path,"",""); Statement s = con.createStatement(); String sql = "UPDATE rooms SET Firstname='"+fname.getSelectedItem()+"',Lastname='"+lname.getText()+"',Contactnumber='"+contno.getSelectedItem()+"' WHERE '"+edpno.getText()+"'=edpno"; s.executeUpdate(sql); JOptionPane.showMessageDialog(this,"New room Record has been successfully saved"); dispose(); s.close(); con.close(); } catch(Exception Mismatch){ JOptionPane.showMessageDialog(this,Mismatch); } } public void actionPerformed (ActionEvent ako){ if (ako.getSource() == bRetrieve){ dispose(); } else if (ako.getSource() == bOK){ SaveRecord(); } } public static void main (String [] awtsave){ new Search(); } }

  Read the article

• Attending a Career Fair: &ldquo;Don&rsquo;t be shy &ndash; Be prepared&rdquo;

  - by jessica.ebbelaar

  There are a large number of ways to interact with companies nowadays. The career fair is a very effective and personal way to interact with a number of different companies in a very short period of time. Here are some simple tips to help you perform during a career fair. Do research The key to being successful at a career fair is to do research before you go. Make a first selection of the companies you feel could be interesting for you. Include many types of employers. Once you have decided on the list of companies you want to visit, go to their career portal. Inform yourself about what the company does, i.e what roles there are available, how the company culture is described, what impression the testimonials give you. The question that you still have after reviewing this information, are the ones you can discuss with the company on the fair. Sell yourself Visit the companies you have on your top 5 list first, so you will be at your highest energy level to make that first impression. Think in advance about what you are going to tell the recruiter. Prepare a 30-second introduction (including degree, strengths, skills & experience) Be confident when you talk about your experience. Remember to start the conversation with a smile, make good eye contact and give a firm handshake. You could be speaking to your next manager, so be professional! If you already know what jobs you are interested in, relate your skills and experience to the roles that the company has available. If you are not yet sure gather as much information as you can about employment and/or hiring procedures, specific skills necessary for different jobs, training and career paths. Stand out As career fairs are very crowded and the attending companies meet with a lot of potential candidates on one day, you have to make sure you are noticed in a positive way. A good preparation and asking questions that show you have a good understanding of the industry, organization and roles will help you. Be aware of time demands on employers. Do not monopolize an employer's time. Dress appropriately to make a good first impression. Bring your resume Do not forget to bring your resume in print or on a USB-stick to the fair. If you are searching for different types of jobs, bring different versions of your resume. Your resume should be short and professional on white paper that is free of graphics or fancy print styles and containing larger margins for interviewer notes. Follow up After each conversation ask who you can contact for follow-up discussions about the specific roles. Use the back of a business card to record notes that help you remember important details and follow-up instructions. If no card is available, record the contact information and your comments in your notepad or phone. Last but not least, thank everyone you talk to for their time. Follow up as soon as possible with thank you notes that address the companies’ hiring needs, your qualifications, and express your desire for a second interview. What not to do… Do not visit a company with a group of friends. Interact with the companies on your own, to make your own positive impression. Do not walk up to a recruiter and interrupt a current conversation; wait your turn and be polite. What you should absolutely avoid is a grab and run on freebies! Take the time to speak to the company and ask for a freebie at the end of the conversation in case they are not offered to you. Good luck with the preparations for the career fair you will attend. Oracle recruiters look forward to meet you! They will be present on a large number of fairs in the region. For an overview of the fairs go to the Events & Calendar page on http://campus.oracle.com If you have any questions related to this article feel free to contact [email protected].

  Read the article

• Wireless cycling between connected and disconnected

  - by Tony Kilgore

  My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

  Read the article

• WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

  - by el10780

  After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

  Read the article

• 12.04 making BCM4313 card work with aircrack-ng?

  - by Charles Forest

  I'm a real Linux Noob, just started using it (this month) and until now i had no issues. now i'm trying to set-up aircrack-ng on my laptop, but it seems like it's using the worst card possible (or almost) there is a TON of tutorial on this card (seems to be hell to set-up) i have tryed some, but i ended up uninstalling my drivers, messing with my desktops, and ended by having no more "X" to close my windows (i have no clue how i ended there) i just re-installed my linux (took me 2 hours to setup everything again), but now i'm a bit "Scared" to try tutorials randomly again. Right now it says the driver is wl, wich is not the one i want (AFAIK it's not supported) i'm not sure what kind of informations are needed, but here's what i think could be usefull. lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: i2c-i801 01:00.0 3D controller [0302]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb WIRELESS CARD 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac REST... 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: xhci_hcd Also, if i'm "screwed" with my hardware, just tell me.

  Read the article

• Virtualized data centre&ndash;Part three: Architecture

  - by marc dekeyser

  Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all!   From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization  host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

  Read the article

• Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect

  - by user287529

  Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect. I'm using Ubuntu 12.04 on an Acer Aspire 5742-7645 laptop with 4GB memory, Intel Core i3 processor, Intel HD Graphics, DVD drive, 802.1 b/g/n, and 500 GB HD. I connect to my router via a wireless connection. I have installed Virutalbox 4.1.12 from the Ubuntu Software Center and installed Guest additions 4.1.12 in the Windows 7 guest session. I have Windows XP and Windows 7 installed as guests in Virtual box The network settings are different for XP and 7 – see below. Network Settings XP guest = Adapter 1: PCnet-FAST III (NAT) - Network works perfectly and has worked well for several years. Network Settings Win 7 = Adapter 1: Intel PRO/1000 MT Desktop (Bridged adapter, eth1) Promiscuous Mode = allow all Cable connected = checked When I originally installed Windows 7, I tried NAT and the guest network would not connect. Once I changed the setting to the above (Bridged) the Network worked perfectly. However, what I believe is after updates (not sure if it was an Ubuntu or Windows update) the guest network stopped working and I can not get it to connect. Interfaces file content auto lo iface lo inet loopback Ifconfig yields lou@lou-Aspire-5742:~$ ifconfig eth0 Link encap:Ethernet HWaddr 1c:75:08:09:f6:5c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 Link encap:Ethernet HWaddr 4c:0f:6e:7c:9f:01 inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4e0f:6eff:fe7c:9f01/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18095 errors:2 dropped:0 overruns:0 frame:24344 TX packets:9281 errors:47 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5301926 (5.3 MB) TX bytes:1441885 (1.4 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3208 errors:0 dropped:0 overruns:0 frame:0 TX packets:3208 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:294088 (294.0 KB) TX bytes:294088 (294.0 KB) Ipconfig yields the following: Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::38ba:dbca:a21d:c3d1%13 Autoconfiguration IPv4 Address. . : 169.254.195.209 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{B292E440-679D-4FC5-8E34-77D6804669C8}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : I'm not sure what else to do. Can someone provide the troubleshooting steps to determine what the problem is and possible solution?

  Read the article

• Antenna Aligner Part 7: Connecting the dots

  - by Chris George

  The app is basically ready, so I eagerly started to sort out creating the application entry in iTunes Connect. It's mostly intuitive actually, although I did have to create yet another icon for iTunes sized 512x512 pixels, damn lucky I did the original graphics as vector! It took me longer to write the application description than anything else, I'm so not a tech author! I didn't like the way you have to 'make up' an SKU (Stock Keeping Unit) number. I have to do some googling to find out that it really doesn't matter what it is! It should be more obvious what to do from the actual website itself. That aside, the rest of it was actually fairly straightforward. As well as the details of the application, iPhone and iPad screenshots were also required. This posed somewhat of a problem. The iPhone ones were easy (as I have one!), but I do not (yet) own an iPad . So I thought I'd leave the iPad screenshots out for now. Once the application details were sorted, I moved onto the rights and pricing. At the start of the project I had made the decision that I wouldn't charge any more than the lowest amount £0.59. I believe there is a market for this, but as my first foray into app development I didn't want to take the mick. I did realise, however, that I had built my app with a developer certificate and provisioning profile. This was fairly quickly corrected, and again Nomad made this very easy to switch over to the distribution certificate and provisioning profile. With a sense of excitement I cracked open iTunes connect and clicked the upload button ... ...slight snag... . when the Nomad project was started, Apple allowed uploads of these binaries via iTunes Connect. But this is no longer possible, the only upload path is via the Application Loader available from the Apple Developer program. This itself has one limitation, it only runs on a mac! D'OH!!!  Actually my language was somewhat more colourful when this fact came to light. After picking my laptop up off the floor and putting it back together... ok only joking, but I did nearly throw it out of frustration!... I started to consider the options; I briefly entertained the idea of buying a cheap mac from ebay... no, that defeats the whole object of what I'm doing, plus my wife wouldn't be impressed there are some guys out there in the interweb who will upload your app for a small fee...but I don't really like the idea of giving some faceless email address my apple developer login details, as well as my app binary! find some willing friend with a mac who would kindly let me use it... obviously this is the only sensible option. In the meantime, I informed the Nomad team about this slight 'issue' and they are currently investigating possible solutions...

  Read the article

• Animation Trouble with Java Swing Timer - Also, JFrame Will Not Exit_On_Close

  - by forgotton_semicolon

  So, I am using a Java Swing Timer because putting the animation code in a run() method of a Thread subclass caused an insane amount of flickering that is really a terrible experience for any video game player. Can anyone give me any tips on: Why there is no animation... Why the JFrame will not close when it is coded to Exit_On_Close 2 times My code is here: import java.awt.; import java.awt.event.; import javax.swing.*; import java.net.URL; //////////////////////////////////////////////////////////////// TFQ public class TFQ extends JFrame { DrawingsInSpace dis; //========================================================== constructor public TFQ() { dis = new DrawingsInSpace(); JPanel content = new JPanel(); content.setLayout(new FlowLayout()); this.setContentPane(dis); this.setDefaultCloseOperation(EXIT_ON_CLOSE); this.setTitle("Plasma_Orbs_Off_Orion"); this.setSize(500,500); this.pack(); //... Create timer which calls action listener every second.. // Use full package qualification for javax.swing.Timer // to avoid potential conflicts with java.util.Timer. javax.swing.Timer t = new javax.swing.Timer(500, new TimePhaseListener()); t.start(); } /////////////////////////////////////////////// inner class Listener thing class TimePhaseListener implements ActionListener, KeyListener { // counter int total; // loop control boolean Its_a_go = true; //position of our matrix int tf = -400; //sprite directions int Sprite_Direction; final int RIGHT = 1; final int LEFT = 2; //for obstacle Rectangle mega_obstacle = new Rectangle(200, 0, 20, HEIGHT); public void actionPerformed(ActionEvent e) { //... Whenever this is called, repaint the screen dis.repaint(); addKeyListener(this); while (Its_a_go) { try { dis.repaint(); if(Sprite_Direction == RIGHT) { dis.matrix.x += 2; } // end if i think if(Sprite_Direction == LEFT) { dis.matrix.x -= 2; } } catch(Exception ex) { System.out.println(ex); } } // end while i think } // end actionPerformed @Override public void keyPressed(KeyEvent arg0) { // TODO Auto-generated method stub } @Override public void keyReleased(KeyEvent arg0) { // TODO Auto-generated method stub } @Override public void keyTyped(KeyEvent event) { // TODO Auto-generated method stub if (event.getKeyChar()=='f'){ Sprite_Direction = RIGHT; System.out.println("matrix should be animating now "); System.out.println("current matrix position = " + dis.matrix.x); } if (event.getKeyChar()=='d') { Sprite_Direction = LEFT; System.out.println("matrix should be going in reverse"); System.out.println("current matrix position = " + dis.matrix.x); } } } //================================================================= main public static void main(String[] args) { JFrame SafetyPins = new TFQ(); SafetyPins.setVisible(true); SafetyPins.setSize(500,500); SafetyPins.setResizable(true); SafetyPins.setLocationRelativeTo(null); SafetyPins.setDefaultCloseOperation(EXIT_ON_CLOSE); } } class DrawingsInSpace extends JPanel { URL url1_plasma_orbs; URL url2_matrix; Image img1_plasma_orbs; Image img2_matrix; // for the plasma_orbs Rectangle bbb = new Rectangle(0,0, 0, 0); // for the matrix Rectangle matrix = new Rectangle(-400, 60, 430, 200); public DrawingsInSpace() { //load URLs try { url1_plasma_orbs = this.getClass().getResource("plasma_orbs.png"); url2_matrix = this.getClass().getResource("matrix.png"); } catch(Exception e) { System.out.println(e); } // attach the URLs to the images img1_plasma_orbs = Toolkit.getDefaultToolkit().getImage(url1_plasma_orbs); img2_matrix = Toolkit.getDefaultToolkit().getImage(url2_matrix); } public void paintComponent(Graphics g) { super.paintComponent(g); // draw the plasma_orbs g.drawImage(img1_plasma_orbs, bbb.x, bbb.y,this); //draw the matrix g.drawImage(img2_matrix, matrix.x, matrix.y, this); } } // end class enter code here

  Read the article

• Libgdx 2D Game, Random generated World of random size, how to get mouse coordinates?

  - by Solom

  I'm a noob and English is not my mothertongue, so please bear with me! I'm generating a map for a Sidescroller out of a 2D-array. That is, the array holds different values and I create blocks based on that value. Now, my problem is to match mouse coordinates on screen with the actual block the mouse is pointing at. public class GameScreen implements Screen { private static final int WIDTH = 100; private static final int HEIGHT = 70; private OrthographicCamera camera; private Rectangle glViewport; private Spritebatch spriteBatch; private Map map; private Block block; ... @Override public void show() { camera = new OrthographicCamera(WIDTH, HEIGHT); camera.position.set(WIDTH/2, HEIGHT/2, 0); glViewport = new Rectangle(0, 0, WIDTH, HEIGHT); map = new Map(16384, 256); map.printTileMap(); // Debugging only spriteBatch = new SpriteBatch(); } @Override public void render(float delta) { // Clear previous frame Gdx.gl.glClearColor(1, 1, 1, 1 ); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); GL30 gl = Gdx.graphics.getGL30(); // gl.glViewport((int) glViewport.x, (int) glViewport.y, (int) glViewport.width, (int) glViewport.height); spriteBatch.setProjectionMatrix(camera.combined); camera.update(); spriteBatch.begin(); // Draw Map this.drawMap(); // spriteBatch.flush(); spriteBatch.end(); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { // Bounds check (y) if(camera.position.y + camera.viewportHeight < a)// || camera.position.y - camera.viewportHeight > a) break; for(int b = 0; b < map.getWidth(); b++) { // Bounds check (x) if(camera.position.x + camera.viewportWidth < b)// || camera.position.x > b) break; // Dynamic rendering via BlockManager int id = map.getTileMap()[a][b]; Block block = BlockManager.map.get(id); if(block != null) // Check if Air { block.setPosition(b, a); spriteBatch.draw(block.getTexture(), b, a, 1 ,1); } } } } As you can see, I don't use the viewport anywhere. Not sure if I need it somewhere down the road. So, the map is 16384 blocks wide. One block is 16 pixels in size. One of my naive approaches was this: if(Gdx.input.isButtonPressed(Input.Buttons.LEFT)) { Vector3 mousePos = new Vector3(); mousePos.set(Gdx.input.getX(), Gdx.input.getY(), 0); camera.unproject(mousePos); System.out.println(Math.round(mousePos.x)); // *16); // Debugging // TODO: round // map.getTileMap()[mousePos.x][mousePos.y] = 2; // Draw at mouse position } I confused myself somewhere down the road I fear. What I want to do is, update the "block" (or rather the information in the Map/2D-Array) so that in the next render() there is another block. Basically drawing on the spriteBatch g So if anyone could point me in the right direction this would be highly appreciated. Thanks!

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >