Search Results

Search found 6845 results on 274 pages for 'systems'.

Page 209/274 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• DD-WRT: DNSMasq expand-hosts not working

  - by Craig Walker

  I have a Linksys router running DD-WRT (Firmware: DD-WRT v24-sp2 (09/08/09) mini). I have it successfully resolving the DNS names for my DHCP-assigned systems, but only when I fully-qualify those domains. This is despite using the "expand-hosts" DNSMasq additional option, which is supposed to activate this precise function. Here's my dnsmasq.conf: interface=br0 resolv-file=/tmp/resolv.dnsmasq domain=example.com dhcp-leasefile=/tmp/dnsmasq.leases dhcp-lease-max=51 dhcp-option=lan,3,10.77.0.5 dhcp-authoritative dhcp-range=lan,10.77.0.100,10.77.0.149,255.255.0.0,1440m dhcp-host=00:1A:A0:1D:82:5A,astatichostname,10.77.1.40,infinite expand-hosts (FYI: example.com and astatichostname are placeholders for the real-deal names I use. My network uses 10.77.0.0/16; my router is on 10.77.0.5.) Results: > nslookup astatichostname 10.77.0.5 Server: 10.77.0.5 Address: 10.77.0.5#53 ** server can't find astatichostname: NXDOMAIN > nslookup astatichostname.example.com 10.77.0.5 Server: 10.77.0.5 Address: 10.77.0.5#53 Name: astatichostname.example.com Address: 10.77.1.40 Is there something else that could be tripping up expand-host in DNSMasq?

  Read the article

• installing windows on mac mini.

  - by sagar

  Please - please, don't start down voting after reading the question title. Hey ! Please first of read out the question. I brought a whole new mac mini as I am an iPhone developer - I prefer to use it. But most of my family members are not used to with mac osx. They don't know how to operate os x. Managing files Opening documents Browser & many many other issues. It's not their age to learn more, people like us ( computer geek ) can easily get into new systems. I had many attempted efforts to teach them for all these above topics in windows. Summary, Of all these, I know how to use mac, but they don't know. They stair like I am making private & bad usage of mac. In short, I just want to install windows. So, that they can feel that mac mini is for all members not for just me. Original Question Dual Boot windows & os x on mac mini ? Is it possible ? How ? Does it void warranties of apple ?

  Read the article

• Commvault Oracle RMAN Restore to new host

  - by Glenn Stauffer

  We use Commvault Simpana 8 and I have a situation where I have backups of an Oracle database on tape that were taken from Host A. Host A suffered a disk failure (lost its raid configuration) and the sys admins are trying to restore it; in the meantime, I'd working to bring the database back up on another host - Host B. I'm running into problems and am trying to sort out the parameters that need to be passed to the Commvault media agent to get this to work. Unfortunately, I do not have access to Commvault support and the backup person is unavailable. Any one have a clue? The backups are there and the media agent reported a successful write when they ran last night. This is what fails: RMAN run { allocate channel t1 device type sbt_tape parms='SBT_LIBRARY=/usr/local/galaxy/Base/libobk.so,BLKSIZE=262144, ENV=(CvClientName=dbsrv2,CvInstanceName=Instance001, CVOraRacDBName=BBDB, CVOraRACDBClientName=BBDB)'; restore spfile to pfile '/tmp/bbdb.ora' from autobackup; }2 3 4 allocated channel: t1 channel t1: sid=34 devtype=SBT_TAPE channel t1: CommVault Systems for Oracle: Version 7.0.0(Build76) Starting restore at 09-MAY-10 channel t1: looking for autobackup on day: 20100509 channel t1: autobackup found: c-3941155360-20100509-01 released channel: t1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 05/09/2010 18:01:35 ORA-19870: error reading backup piece c-3941155360-20100509-01 ORA-19507: failed to retrieve sequential file, handle="c-3941155360-20100509-01", parms="" ORA-27029: skgfrtrv: sbtrestore returned error ORA-19511: Error received from media manager layer, error text: sbtrestore: Job[0] thread[26316]: InitializeCLRestore() failed.

  Read the article

• How to resolve Windows Update Error 8024402F on Windows 7 Home Premium 64bit?

  - by Day

  I have been having the same problem with Windows Updates on 2 of my machines at home, both running Windows 7 Home Premium 64-bit. One of the 2 machines is a brand new install, the other has run Windows Update in the past, but is also not working now. When I manually check for updates using the Control Panel, I get error code 8024402F: I followed the link to "Get help with this error", which brings up several articles in Windows Help and Support, none of which are for this specific error code. From the help and general googling I've tried: Checking internet connectivity. Most of the help suggests that this error is caused by a general internet connectivity problem. But if you're reading this, my connection is definitely working fine. Disabling antivirus temporarily and trying to run Windows Update. This didn't help (I run AVG free) Running Control Panel - Troubleshooting - Security Systems - Fix Problems with Windows Update. This said it detected and resolved problems, but didn't help. Update using IE (as I used to in XP). Go to http://windowsupdate.microsoft.com/ redirects me to http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx for which IE displays a "connection problem" (i.e. site unreachable) I've had the same problem for 24 hours now, so surely the Windows Update servers haven't been down this whole time? A quick check on twitter shows no worldwide outcry about Windows Update being unavailable, so is it just me? I'm based in the UK, but I notice that the http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx URL is also unavailable using ''wget'' from my webserver in Chicago. day@ord1:~$ wget http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx --2011-03-17 00:01:27-- http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx Resolving test.update.microsoft.com... failed: Name or service not known. wget: unable to resolve host address `test.update.microsoft.com' day@ord1:~$ host test.update.microsoft.com Host test.update.microsoft.com not found: 3(NXDOMAIN)

  Read the article

• Cisco adaptive security appliance is dropping packets where SYN flag is not set

  - by Brett Ryan

  We have an apache instance sitting inside our DMZ which is configured to proxy requests to an internal NATed tomcat instance inside our network. It works fine, but then all of a sudden requests from apache to the tomcat instance stop getting through with the following in the apache logs: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header Investigating into the Cisco log viewer reveals the following: Error Message %ASA-6-106015: Deny TCP (no connection) from IP_address/port to IP_address/port flags tcp_flags on interface interface_name. Explanation The adaptive security appliance discarded a TCP packet that has no associated connection in the adaptive security appliance connection table. The adaptive security appliance looks for a SYN flag in the packet, which indicates a request to establish a new connection. If the SYN flag is not set, and there is not an existing connection, the adaptive security appliance discards the packet. Recommended Action None required unless the adaptive security appliance receives a large volume of these invalid TCP packets. If this is the case, trace the packets to the source and determine the reason these packets were sent. All are machines are virtualised using VMware, and by default machines have been using the Intel E1000 emulated NIC. Our network administrator has changed this to a VMXNET3 driver in an attempt to correct the problem, we just have to wait and see if the problem persists as it's an intermittent problem. Is there something else that could be causing this problem? This isn't the first service where we have had similar issues. Our apache host is running Ubuntu 11.10 with a kernel version of 3.0.0-17-server. We have also had this issue on RHEL5 (5.8) running kernel 2.6.18-308.16.1.el5, this machine also has the E1000 NIC. NOTE: I am not a network administrator and am a software architect and analyst programmer responsible for these systems.

  Read the article

• VMRC equivalent for Hyper-V?

  - by Ian Boyd

  VMRC was the client tool used to connect to virtual machines running on Virtual Server. Upgrading to Windows Server 2008 R2 with the Hyper-V role, i need a way for people to be able to use the virtual machines. Note: not all virtual machines will have network connectivity not all virtual machines will be running Windows some people needing to connect to a virtual machine will be running Windows XP Hyper-V manager, allowing management of the hyper-v server, is less desirable (since it allows management of the hyper-v server (and doesn't work on all operating systems)) What is the Windows Server 2008 R2 equivalent of VMRC; to "vnc" to a virtual server? Update: i think Tatas was suggesting Microsoft System Center Virtual Machine Manager Self-Service Portal 2.0 (?): Which requires SQL Server IIS Installing those would unfortunately violate our Windows Server 2008 R2 license. i might be looking at the wrong product link, since commenter said there is a version that doesn't require "System Center". Update 2: The Windows Server 2008 R2 running HyperV is being licensed with the understanding that it only be used to host HyperV. From the [Windows Server 2008 R2 Licensing FAQ][4]: Q. If I have one license for Windows Server 2008 R2 Standard and want to run it in a virtual operating system environment, can I continue running it in the physical operating system environment? A. Yes, with Windows Server 2008 R2 Standard, you may run one instance in the physical operating system environment and one instance in the virtual operating system environment; however, the instance running in the physical operating system environment may be used only to run hardware virtualization software, provide hardware virtualization services, or to run software to manage and service operating system environments on the licensed server. This is why i'm weary about installing IIS or SQL Server.

  Read the article

• Hyper-V Server 2012 with Zambezi AMD FX-Series - Hardware assisted virtualization not present

  - by Vazgen

  I'm trying to set up VDI across Windows Server 2012 VMs running on Hyper-V 2012. The wizard's compatibility check for the Virtualization Host server failed with "Hardware-assisted virtualization is not present on the server". I'm running an FX-8120 CPU and have the ASUS M5A97 motherboard. I know I'm supposed to enable No-Execute (Hyper-V Hardware Considerations) but I cannot find that or any other synonyms of it in my motherboards UEFI BIOS (NX, XD, EVP, XN... nothing). I found this: PAE/NX/SSE2 Support Requirement Guide for Windows 8 which in short says "Windows 8 and Windows Server 2012 requires that systems must have processors that support NX, and NX must be turned on for important security safeguards to function effectively and avoid potential security vulnerabilities." this leads me to believe NX is on by default if I was able to get this far and install Hyper-V 2012 and Windows Server 2012.. Also I tried to disable AVX in cmd with "bcdedit /set xsavedisable 1". Did not resolve My processor is Zambezi FX-8120 and also supports RVI/SLAT/other synonym: processor: Newegg Processor FX-8120 support proof: AMD Processors with Rapid Virtualization Indexing Required to Run Hyper-V in Windows 8 What's going on here? I bought this CPU specifically after I had the same problems with an older AMD Athelon II and made sure to buy one with AMD-V and RVI. Thank you

  Read the article

• Commvault Oracle RMAN Restore to new host

  - by Glenn Stauffer

  We use Commvault Simpana 8 and I have a situation where I have backups of an Oracle database on tape that were taken from Host A. Host A suffered a disk failure (lost its raid configuration) and the sys admins are trying to restore it; in the meantime, I'd working to bring the database back up on another host - Host B. I'm running into problems and am trying to sort out the parameters that need to be passed to the Commvault media agent to get this to work. Unfortunately, I do not have access to Commvault support and the backup person is unavailable. Any one have a clue? The backups are there and the media agent reported a successful write when they ran last night. This is what fails: run { allocate channel t1 device type sbt_tape parms='SBT_LIBRARY=/usr/local/galaxy/Base/libobk.so,BLKSIZE=262144, ENV=(CvClientName=dbsrv2,CvInstanceName=Instance001, CVOraSID=BBPROD)'; restore spfile to pfile '/tmp/bbdb.ora' from autobackup; } allocated channel: t1 channel t1: sid=34 devtype=SBT_TAPE channel t1: CommVault Systems for Oracle: Version 7.0.0(Build76) Starting restore at 09-MAY-10 channel t1: looking for autobackup on day: 20100509 channel t1: autobackup found: c-3941155360-20100509-01 released channel: t1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 05/09/2010 18:01:35 ORA-19870: error reading backup piece c-3941155360-20100509-01 ORA-19507: failed to retrieve sequential file, handle="c-3941155360-20100509-01", parms="" ORA-27029: skgfrtrv: sbtrestore returned error ORA-19511: Error received from media manager layer, error text: sbtrestore: Job[0] thread[26316]: InitializeCLRestore() failed.

  Read the article

• Can I change the file system on the OS partition on Server 2008 R2?

  - by KCotreau

  I have a client using R1Soft Continuous Data Protection backup, and two of the Server 2008 R2 boxes were erroring out with these errors: Unable to obtain NTFS volume data for device '\\?\Volume{f612849e-7125-11e0-8772-806e6f6e6963}': Incorrect function. Unable to discover information for filesytem volume '\\?\Volume{f612849e-7125-11e0-8772-806e6f6e6963}'; Unable to obtain NTFS volume So I backed up all the registry entries with this, {f612849e-7125-11e0-8772-806e6f6e6963}, in it, and deleted them based on some VERY sparse info from R1Soft. I then decided to restore them before I rebooted, and do a system state backup first using MS backup, and even it errored out saying that there were FAT32 partitions. This was a major clue as the only two computers with problems had these FAT32 partitions. I figured if MS backup can't backup something, any other program is likely to have problems. Also, now that I realized the servers had FAT32 partitions on them, the error referencing NTFS takes on more weight. The partitions on both servers have the label "OS", but on one of the computers, it is given a letter, but on the other not. So I am thinking if I just convert the file systems from FAT32 to NTFS, it may solve the backup problem. So the question is this: Can I just convert those partitions, and does anyone have any concrete knowledge of any major downsides, like the servers not coming back up (of course, I would do one at a time)? My thinking is that the answer is probably at least 95% no, but they are production servers, so I wanted to get some second opinions.

  Read the article

• Replacing DropBox with: Amazon S3 + SSL + GPG/TrueCrypt + Mounting on OSX ??

  - by Matt Rogish

  So, right now we're using DropBox to share various data files around between approximately 10 Mac OS X systems. However, we already have an S3 account and everyone on the lowest DropBox plan of $10/mo seems too expensive. We'd like to avoid any kind of local storage (share a disk on a desktop or something) since we're a geographically distributed team). So, I am contemplating something that would allow us to replace DropBox with our own home-grown solution. We are all fairly technical people and/or smart enough to follow some steps, so if it's not as "user friendly" as DropBox we're all comfortable with that. There are plenty of docs out there that have bits and pieces of what I want but some of the tools don't seem to fit the requirements: Transport security via SSL to the bucket Encryption of bucket contents Bi-directional syncing Most of the scripts I can find on the internet use "duplicity" which appears to fail #1 (it doesn't look like duplicity supports SSL to S3 - the docs don't state but the protocol looks plain old http http://www.nongnu.org/duplicity/duplicity.1.html#sect6 ) Many scripts use gpg to encrypt files. This seems like it could work, however I have to make sure that each OSX client is able to use the same key to encrypt and decrypt files (key management is left to me to manage). FTP and other client-based apps don't seem to support this at all. Finally, most of the scripts use one-way replication, e.g. using Amazon S3 as a simple backup store. As we'd be using Amazon S3 as the "repository" they fail this one. Whew. So, I'd love a single tool that does this but after an exhaustive search I don't think one exists. In my mind, the magical tool would be some combination of TrueCrypt and rsync. I'd be happy just knowing which tools out there can fulfill my 3 requirements, after that I can stitch together the rest. Any thoughts? THANKS!

  Read the article

• What kind of “sysadmin stuff” should I show to students during a talk?

  - by Gregory Eric Sanderaon

  A teacher asked me If I could talk about my job as a linux sysadmin in his class. The course is called "Introduction to Operating systems" and i've been given 45 minutes to talk. The students are beginning their second year, so they've had a bit of experience with programming in different languages. What i'm like to do is show a series of hands-on examples of the kinds of things I do on a regular basis. I've already got a few ideas jotted down, but I'm afraid that they might be either too advanced or too simple for the students to appreciate. Another concern is that a topic might be too long to explain and use too much time overall. Here are a few ideas : Program deployment using version control (git in my case) filtering apache logs using grep, awk, uniq, tail A couple of bash scripts that i've made for various stuff on servers live montitoring (htop, iotop, iptraf) creating databases and assigning roles in mysql/postgresql So, are these ideas any good ? Do you have better ideas ? are the ideas too simple and should I go for more "advanced" stuff ?

  Read the article

• boot.ini Issue - Multi-boot System, Linux, XP and XP64 - Missing File in system32 Message

  - by nicorellius

  I have an interesting issue that has me stumped. Not that I'm a computer whiz or anything. I have a multi-boot system with two hard drives: one drive has CentOS and Windows XP 64-bit and the other drive has Windows XP 32-bit. CentOS grub boot loader works great, and I have it set to default to Windows. But this is the problem. My boot.ini file seems to be in order, yet it still gives an error if I choose the default OS (which, consequently, is XP32): Windows could not start because the following file is missing or corrput: (Windows root) \system32\ntoskrnl.exe. Please re-install a copy of the above file. But if I choose the actual boot ID, i.e., toggle to the Windows XP Pro selection it boots just fine. In the boot.ini file, the entry for XP 32 is the samee: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Pro" /noexecute=optin /fastdetect /usepmtimer [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Pro" /noexecute=optin /fastdetect /usepmtimer multi(0)disk(0)rdisk(1)partition(2)\WINDOWS="Windows XP Pro x64" /noexecute=optin /fastdetect /usepmtimer What am I missing?

  Read the article

• DKIM- Filter No Signature Data

  - by Vineet Sharma

  I have installed DKIM-Filter on Postfix after reading this tutorial http://www.unibia.com/unibianet/systems-networking/how-setup-domainkeys-identified-mail-dkim-postfix-and-ubuntu-server My email now has a DKIM signature but still it is landing in the SPAM folder. Here is the header Received-SPF: neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=69.164.193.167; Authentication-Results: mx.google.com; spf=neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected]; dkim=hardfail (test mode) [email protected] Received: from promote.a2labs.in (localhost [127.0.0.1]) by promote.a2labs.in (Postfix) with ESMTPA id 34858530E8 for <[email protected]>; Mon, 28 Feb 2011 12:23:07 +0530 (IST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=a2labs.in; s=mail; t=1298875987; bh=bo+H1VYPIHMja2u7i1lnzr4k/j4Pe8iSf79bVw94XpI=; h=To:Subject:Message-ID:Date:From:Reply-To:MIME-Version: Content-Type:Content-Transfer-Encoding; b=nhTdlnUwo0iUJ92ycQzKSRjw 5Pfya0DJcJrAc8Mr2hIv8OLpgzBCzdOMWTGqR5nuUmAzgCGYBhYAM2XZwVxo9JG/iz7 oYKysmNQnskFx0TRyW3UOkDWcfHcPnCL6Y7fGzZWinmsyjsg47k+mKZg/e8jqlwTAMO PYKkt5pBz7SM0= Also my mail.err file shows Feb 28 12:17:03 ivineet dkim-filter[32181]: 1F788530E1: no signature data Feb 28 12:18:02 ivineet dkim-filter[32181]: 432BA530E2: no signature data How to fix it

  Read the article

• Exchange 2003 SP2 and Windows Server 2008 R2 Domain Controllers

  - by Brian

  I'm looking at adding two Windows Server 2008 R2 Domain Controllers into our Windows Server 2003 domain to support our Exchange 2003 SP2 server and replace a retiring Windows Server 2003 Server. Our Domain and Forest functional levels are currently Windows Server 2003, which supports domain controller operating systems (Windows Server 2008 R2, Windows Server 2008 and Windows Server 2003) according to the "Appendix of Functional Level Features" on Technet . So there should not be an issue other than running adprep /forestprep and adprep /domain.... right!? But, according to the Exchange Server Supportability Matrix, Windows Server 2008 R2 Active Directory Servers are not supported as global catalog servers or domain controllers in a Exchange 2003 SP2 environment!!!??? This was a shock to me... How can Windows Server 2008 R2 be a DC for a Windows Server 2003 domain and forest, but not communicate with an Exchange 2003 SP2 server? Hopefully, I'm not the first to see this issue (or maybe I am), but I know a lot of Exchange 2003 admins will not be happy if there is not a work around... or is Microsoft trying to push everyone automatically to Exchange 2010...

  Read the article

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windoze at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• "Unable to open MRTG log file" error with nagios and mrtg

  - by Simone Magnaschi

  We have a strange issue with our setup of icinga / nagios and mrtg. Icinga is working great and has no problem, it can monitor basically everything without issues. We setup mrtg to gather bandwith data from our routers and switches. MRTG is working fine: it stores the log data in the /var/www/mrtg/ directory and displays the graph data via web. We assume so MRTG is doing great. We tried to setup bandwidth checks in nagios: define service{ use generic-service ; Inherit values from a template host_name zywall-agora service_description ZYWALL AGORA TRAFFICO check_command check_local_mrtgtraf!/var/www/mrtg/x.x.x.x_2.log!AVG!1000000,2000000!5000000,5000000!1000 check_interval 1 ; Check the service every 1 minute under normal conditions retry_interval 1 ; Re-check every minute until its final/hard state is determined } Where /var/www/mrtg/x.x.x.x_2.log is the correct log path file. We keep on getting Unable to open MRTG log file error in the test result in icinga web interface. We tried everything: give ownership to user nagios or icinga to the log file give chmod 777 to the file try to copy the file in another directory and give it full permission Same error. The strange thing is that if we use the command that nagios generate in a bash session the command works like a charm: /usr/lib64/nagios/plugins/check_mrtgtraf -F /var/www/mrtg/x.x.x.x_2.log -a AVG -w 10,20 -c 5000000,5000000 -e 10 Result: Traffic WARNING - Avg. In = 17.9 KB/s, Avg. Out = 5.0 KB/s|in=17.877930KB/s;10.000000;5000000.000000;0.000000 out=5.000000KB/s;20.000000;5000000.000000;0.000000 We ran that command line as root, as user nagios and as user icinga and all three worked ok. We thought that the command that nagios perform maybe has something wrong in it, so we debugged nagios but we found out that the generated command from nagios is the same as above. Searching on google for these kind of problem returns only issues of systems where mrtg is not installed or issues with the wrong path to the log file, but these seems not to be our case. We are stuck, can somebody help?

  Read the article

• FFMPEG Install on EC2 - Amazon Linux

  - by Oliver Holmberg

  Hello Serverfault friends, I am about two days into attempting to install FFMPEG with dependencies on an AWS EC2 instance running the Amazon Linux AMI. I've installed FFMPEG on Ubuntu and Fedora systems with no problems in the past, and have read reportedly successful instructions on installing on Red Hat/Fedora. I have followed a number of tutorials and forum articles to do so, but have had no luck yet. As far as I can tell, the main problems are as followed: The amazon linux (Most similar to red-hat/centos) yum repositories don't have ffmpeg available. I have found instructions to update the repositories to include the required packages, but adding these repositories cause yum to fail in updating packages. (Also, I've read some cautionary tales about adding redhat/centos repositories to amazon linux that lead me to believe it may be a bad idea) (https://forums.aws.amazon.com/thread.jspa?messageID=229166) I have tried a more complicated method of downloading the source tarball, compiling, and installing, but this always fails due to missing dependencies and other errors. On to my question: Has anyone successfully installed FFMPEG on Amazon Linux? Is there a fundamental incompatibility? If anyone could share specific instructions on installing ffmpeg on amazon linux I would be greatly appreciative. Any other insights/experiences would also be appreciated. Thanks in advance, Oliver

  Read the article

• OpenSSL support for Ruby: "Cipher is not a module (TypeError)"

  - by smotchkkiss

  The Problem Our systems admin needed to upgrade the packages on our CentOS 5.4 dev server to match the packages on our production server. The upgrade affected ruby and/or openssl. We run a Ruby on Rails issue tracking system called Redmine that is deployed with Passenger on Apache. Everything worked before the server update, but when trying to access the ticket system now, I get the following error: Error message: Cipher is not a module Exception class: TypeError Application root: /home/dev/rails/redmine-0.8.7 I've been trying so hard to fix this problem but I can't seem to beat it. I have tried following this guide: http://iamclovin.posterous.com/how-to-solve-the-cipher-is-not-a-module-error When I try require 'openssl' in IRB, I do see a true return value. However, I'm still seeing the Cipher.rb is not a module TypeError when accessing the ticket system. Possibly (probably) related: I've tried updating Passenger, but when I try passenger-install-apache2-module I see: Checking for required software... * GNU C++ compiler... found at /usr/bin/g++ * Ruby development headers... found * OpenSSL support for Ruby... /usr/lib/ruby/1.8/openssl/cipher.rb:22: Cipher is not a module (TypeError) Any help?

  Read the article

• How does a web server/the http protocol handle version control and compression?

  - by Sune Rasmussen

  When a client browser requests a file from the web server, I know that some kind of check is performed, because the files needed to serve the web page may already be cached by the web browser. So, if a file exists in the cache, no files are sent. But if the file on the server has changed since the file was cached in the browser, the file is sent and updated anyhow. Then, if you have compression like gzipping enabled on the server, the files that are to be provided to the client must be gzipped on the way, requiring some amount of server side processing. But how is this managed? The logical approach seems to me, that the web server should have a cache as well, containing the newest version of all files that have been requested within a certain time span, thus a compressed version of these files, so that compression would not have to be done each time a files is requested. And also, how are files eventually requested? Does the browser ask for files, each time it encounters one in the HTML code and the specific file is not stored in the local cache, or does it sum all the files that are needed up and ask for the whole bunch at the same time? But that's only guessing from a programming point of view, and I don't really know. If the answers are very different among web server systems, I'm primarily interested in Apache, but other answers are appreciated, too.

  Read the article

• Simple P2V help from Linux to Windows

  - by Ke.

  I have two OS's installed on different drives in my PC. One linux (Centos 5.4) and one windows 7. Its getting tiresome to constantly have to stop and restart the PC when I want to use either OS. I would very much like to use Windows 7 as my host OS and access my linux OS from within Windows. However, im having trouble deciphering exactly how to do this (many of the articles seem confusing and a bit overkill) From what i have seen its possible to use VMWare converter to convert the physical linux image to a virtual image so that I can use it in windows. As im having problems understanding how this is done, I would really appreciate a step by step guide (for a newbie), or any simple tutorials that you can point me at. Some questions beforehand: 1) My linux image is around 80gb, do i need to take this into consideration? The linux drive is around 180gb in total. All my other drives are NTFS non writeable in linux (as I use them in windows and ntfs is dodgy in linux), so probably not possible to move the image over to my ntfs drives 2) Can I just zip the linux files up somehow and transfer it to windows to create the p2v? 3) Is it possible to do the P2V conversion while I am logged into windows. I can see the actual linux drive loaded in disk manager, but windows doesnt read linux file systems so im confused as to how to access the linux drive if this is possible. 4) Or will i need to do the whole p2v conversion inside linux? Cheers, any help is much appreciated Ke (a confused p2v newbie)

  Read the article

• rpm file conflict after alien conversion

  - by Zitrax

  I have a program for which I generate a .deb file. The .deb file works fine on the systems I have tried it on (also tested with lintian). Previously it has worked to use alien to convert this to .rpm and install it on Suse. However it is now about a year since I tried it the last time and now I get an error when trying to install the alien made rpm on Fedora 11, I get this error: file /usr/share/icons/default.kde from install of testpkg-0.2-2.i386 conflicts with file from package kdelibs3-3.5.10-13.fc11.1.i586 Listing the content of the rpm file: $ rpm -qlp testpkg-0.2-2.i386.rpm / /usr /usr/games /usr/games/testpkg /usr/lib /usr/lib/libfmod-3.75.so /usr/share /usr/share/app-install /usr/share/app-install/icons /usr/share/app-install/icons/testpkg.png /usr/share/applications /usr/share/applications/testpkg.desktop /usr/share/doc /usr/share/doc/testpkg /usr/share/doc/testpkg/changelog.gz /usr/share/doc/testpkg/copyright /usr/share/games /usr/share/games/testpkg /usr/share/games/testpkg/images /usr/share/games/testpkg/images/bb.dat /usr/share/games/testpkg/images/bb_bg.dat /usr/share/games/testpkg/images/bubblemad_8x8.png /usr/share/games/testpkg/images/goldfont.png /usr/share/games/testpkg/lvl /usr/share/games/testpkg/lvl/lvl001.txt /usr/share/games/testpkg/lvl/lvl002.txt /usr/share/games/testpkg/lvl/lvl003.txt /usr/share/games/testpkg/lvl/lvl004.txt /usr/share/games/testpkg/lvl/lvl005.txt /usr/share/games/testpkg/lvl/lvl006.txt /usr/share/games/testpkg/lvl/lvl007.txt /usr/share/games/testpkg/music /usr/share/games/testpkg/music/alfa.it /usr/share/games/testpkg/music/beta.it /usr/share/games/testpkg/sounds /usr/share/games/testpkg/sounds/bounce.wav /usr/share/games/testpkg/sounds/click.wav /usr/share/games/testpkg/sounds/warning.wav /usr/share/icons /usr/share/icons/default.kde /usr/share/icons/default.kde/16x16 /usr/share/icons/default.kde/16x16/apps /usr/share/icons/default.kde/16x16/apps/testpkg.png /usr/share/man /usr/share/man/man6 /usr/share/man/man6/testpkg.6.gz Am I wrong in putting the kde icons in /usr/share/icons/default.kde which seem to be a symbolic link ? It's a symbolic link on both Kubuntu 9.10 and Fedora 11 though. Sounds like a common situation that the same directory is needed for different packages, so why is it a conflict ?

  Read the article

• Reverse Proxies and AJAX

  - by osij2is

  A client of ours is using IBM/Tivoli WebSEAL, a reverse-proxy server for some of their internal users. Our web application (ASP.NET 2.0) and is a fairly straightforward web/database application. Currently, our client users that are going through the WebSEAL proxy are having problems with a .NET 3rd party control. Users who are not going through the proxy have no issues. The 3rd party control is nothing more than an AJAX dynamic tree that on each click requests all the nodes for each leaf. Now our clients claim that once users click on a node in the control, the control itself freezes in such a way that they don't see anything populate. Users see "Loading..." message appear but no new activity there afterwards. They have to leave the page and go back to the original page in order to view the new nodes. I've never worked with a reverse proxy before so I have googled quite a bit on the subject even found an article on SF. IBM/Tivoli has mentioned this issue before but this is about all they mention at all. While the IBM doc is very helpful, all of our AJAX is from the 3rd party control. I've tried troubleshooting using Firebug but by not being behind the reverse proxy, I'm unable to truly replicate the problem. My question is: does anyone have experience with reverse proxies and issues with AJAX sites? How can I go about proving what the exact issue is? Currently we're negotiating remote access so assume for the greater part that I will have access to a machine that's using the WebSEAL proxy. P.S. I realize this question might teeter on the StackOverFlow/ServerFault jurisdictional debate, but I'm trying to investigate from the systems perspective. I have no experience with reverse proxies (and I'm unclear on the benefits) and little with forwarding proxies.

  Read the article

• Configuration management in support of scientific computing

  - by Sharpie

  For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

  Read the article

• Configuration management in support of scientific computing

  - by Sharpie

  For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >