Search Results

Search found 2615 results on 105 pages for 'dell inspiron 1525'.

Page 21/105 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Dell L501X Display Port Screen issue

  - by jdflorezPA

  I got a Dell XPS L501X with a mini display port to VGA connector for my External Screen. On Displays it shows me: Acer Technologies 24" (which is the monitor) but only lets me up to 1024x768 resolution (The native resolution of this monitor is 1920x1200). I tried adding a new mode with xrandr, but when I applied it, it reverted back to 1024x768. As far as I know, the display port is controlled by the Intel card, right? Any ideas or suggestions would be appreciated. Thanks Using Ubuntu 11.10 32bit

  Read the article

• Are the Broadcom drivers in any new releases for my Dell with BCM4401 and BCM4311

  - by ematthe1

  I installed 12.04 on my wife's Dell laptop to replace 10.04. The code for the Broadcom drivers is broken and I am a user, not a coder. Does any available release of Ubuntu have the drivers in place so I can install and run and get my life back after days of thrashing around. I am willing to do some work, but I am not up to heavy duty command line activity. Please help if you can with any information. Thanks in advance. Matt

  Read the article

• 12.10 nautilus on dell xps 12 does not work

  - by user108664

  I have installed 12.10 on a new Dell XPS 12 ultrabook. Everything seems to work properly right now, including the touch screen, except for nautilus. The left pane works properly, I can select an item on the left and the contents will show up on the right, but when I go to do anything with the contents on the right nothing happens, I can't double click to open, I can't right click to bring up a menu. I can however hold down the left button and to draw a box to select more than one item, but I can't do anything with the selected items. I did not have these problems when I tried 12.04, but unfortunately the touchscreen does not work out of the box on 12.04 and 12.10 seemed to be the faster way go. Any ideas? How can I log what is happening when I try to do anything in nautilus?

  Read the article

• Shutdown issues on my Dell XPS M1530

  - by CppLearner

  On my Dell XPS M1530 lapttop, I am facing issues with shut-down option after upgrading to 12.04 LTS from 11.10. Sometimes it shutdowns "cleanly". But other times everything goes down but I can still see the power LED glowing (even after removing the power cord). If I keep it like that laptop temperature increases. So finally I opt for "hard shut-down" (i.e. pressing the power button on). Any thoughts what is happening here?. Edit: I just found this link to already reported bug https://bugs.launchpad.net/ubuntu/+source/linux/+bug/987933

  Read the article

• Keyboard Issues After Resuming From Sleep on a Dell Vostro 13

  - by sammyd253

  I'm using Ubuntu 11.10 x64. It's running on my Dell Vostro V13. Everything works great until I shut the lid of my laptop (puts laptop into sleep). Once I come back and resume working in Ubuntu, typing becomes a chore. Ubuntu misses a lot of the keypresses from my keyboard. It usually results in me mashing my keyboard until the letter appears. A full system reboot fixes the problem. Again, typing is never an issue unless I resume from sleep. Any ideas?

  Read the article

• Dell monitor not detected (Ubuntu 11.10)

  - by Charles

  I have an issue with my monitor. I just installed Ubuntu 11.10, but the monitor that is plugged in doesn't appear anywhere. And by doesn't appear, I mean that in the "Displays" menu, it doesn't even appear as "Unknown", I just have my screen that appears and nothing else. It is connected through VGA, and the monitor is recognized with no problem on Windows 7. It is a Dell monitor. I'm not a pro with Ubuntu, so any help to diagnose the issue would be really helpful (and help me learn how to fix this kind of monitor issue in the future) Thanks !

  Read the article

• Relaying to tech "support" that computer is actually broken.

  - by Sion

  First some background: I have a Dell Inspiron 15R M050, it is still under the Dell limited warranty and the Best Buy Extended warranty. I am currently dual booting Debian Squeeze and Windows 7, the only reason I go into Windows is to play video games specifically steam games. Issue: When I play my games in Windows I am capable of playing for anywhere from 5 minutes to 2 hours before I suffer a hard-lock. I cannot alt-tab, ctrl-alt-delete, ctrl-shift-escape do anything for 2-3 minutes. After this hard-lock period everything runs fine, I can continue the game for probably another hour at least before I suffer another lock. Games: Borderlands, Splinter Cell: Chaos Theory, Starcraft 2, Garrys Mod What I have tried: Running the diagnostic suite in the dell bios, restoring the OEM Windows recovery partition on the HD, fresh installing Windows 7 Professional, updating BIOS, Calling tech support and having them run a software Hardware Diagnostics suite. The question: I think from the research that I have performed that it might be a lack of thermal paste on the CPU, would I be able to go to Best Buy and have them do a hardware diagnostic from the hardware level then have them be able to tell Dell that there is a hardware issue? Or would there be a different problem?

  Read the article

• How do I get network working on a Dell n5010 - Ubuntu 10.04

  - by cyberroger

  Hey. I just formatted a Dell n5010 and installed Ubuntu 10.04. Now,when i try to access the Internet it doesn't find the available networks. Informations about it: My network is set to broadcast SSID; Already typed lspci, and it doesnt returns my wireless card; Tried installing windows drivers from fabricant cd usind diswrapper, but it says it cant complete the installation because it cant find some "Device" folder; I don't know what else to do, I switch the wireless button on/off and it just can't see any wireless connection, includin mine. Here are the informations about lspci: *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fbc00000-fbc03fff And this: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 12:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) 13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Thanks!

  Read the article

• Dell Mini 9 Integrated Microphone -- not working

  - by Josh Eismanaf

  Im running the latest Debian version, 6.0 on my Dell Mini 9.Webcam and sound work, but microphone is a no-go. I hope even though it is Debian, fellow Linux users can help. In Alsamixer (1.0.23), I have Capture, Digital, and Mic settings all the way up. There are no options for adjusting "Front" mic settings. (May have been for older alsamixer versions?) In Sound Recorder, playback has loud noise/feedback? Under Preferences in Volume Control under the Recording tab, both Capture and Digital are permanently checked, regardless if I uncheck them. I'm not sure how to interpret the above, but I am just trying to offer as much relevant background information as I can. I've been scouring forums for the answer, but to no avail. Most questions/answers are from 2008, and couldn't find a solution. I'm not very handy with the Linux machine, but love to learn / am learning. Also, I've attempted the solution here, and it didn't work. Thanks, in advance, for your help!

  Read the article

• New Dell Vostro 3550 will not boot into Live CD

  - by rich97

  I've been trying to install Ubuntu and/or it's derivatives on my new Dell Vostro 3550 but I'm finding it impossible to boot into the live CD environment. Here are the things I've already tried: Booting from multiple versions of multiple distributions (Ubuntu 10.10, Ubuntu 11.04, Mint 11, Mint 10) Booting from a Live USB created with unetbootin, the Linux Mint startup disk creator, the universal USB creator and dd of=linuxmint.***.iso if if=/dev/sdx. Burning a CD and booting from the internal CD drive. In the case of the USB keys with the latest versions of Ubuntu it gets to the page where I can select a boot option, but after selecting an option the screen goes black, even the back light turns off. With the older distributions the screen stays on but it starts loading and then just hangs. The CDs don't even try to boot. It starts spinning but then falls back to the default Windows install. The only way I've got it to work so far is with Wubi, but that's hardly ideal. I'd like to have two separate physical partitions with a /home and /. Any help is appreciated. Thank you.

  Read the article

• External monitor on old Dell 700m?

  - by Adam Henne

  Okay, linux noob. I installed 10.04 on an old Dell 700m in hopes of using it as a media center device. That seems to work great, except now it won't output to the external monitor. VGA cable works fine, TV recognizes other computers fine, it's the laptop that won't output. Turns out that the 700m, unlike every other computer out there, doesn't have a Fn hotkey to switch monitors. The only way to do it in Windows was to go through the Control Panel. In Ubuntu, though, the Monitor setup won't detect or recognize any monitors. The laptop display works fine, but I can't adjust or add anything. I did a little research and found suggestions for older Ubuntu builds involving the xorg.conf. I tried one out, in spite of my unfamiliarity, and it's screwed the whole display big time. I can fix that with a clean reinstall, that's no problem, but I'm cautious about editing xorg again. Any suggestions? Thank you!

  Read the article

• Dell Inspiron 530 - SSD Worth it?

  - by DrFredEdison

  I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

  Read the article

• Ubuntu and racadm

  - by lmqcn

  I recently purchased a used poweredge 1850 server and it came with a DRAC card. After wiping the HDD and installing ubuntu server 12.04.3 LTS amd64 on it, I am now trying to gain access to the DRAC which I believe is version 4. I have properly configured the DRAC to use it's own IP on my LAN and when I point my browser to the IP address, I am greeted with the DRAC login page (it has the dell logo and everything). However, after trying the credentials of root/calvin, I was denied access. So I think that the previous owners had set their own password. After doing some reading, it appears that I can reset the credentials to the default using racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword but upon entering the command, I get this error: bash: /usr/sbin/racadm: No such file or directory This holds true even if I run sudo su prior to running the racadm command. If, however, I run sudo racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword there are no errors. Yet, when I try to log into the DRAC via the web interface using the credentials of root/newpassword I am still not granted access. I installed the dell utilities via the guide at https://wiki.ubuntu.com/HardwareSupportMachinesServersDellNotes. I first tried to install the 64 bit version that is on the dell repositories, but after that was unsuccessful, I just followed the guide verbatim. No errors were produced in either case. I even followed the information at the bottom of the guide by executing sudo pppd /dev/ttyS1 1382400 crtscts noipdefault noauth lock persist connect 'chat -v "" CLIENT CLIENTSERVER "\\c"' but obviously, replacing the /dev/ttyS1 with the correct information for my system. ls -l /usr/sbin/ | grep racadm yields -rwxr-xr-x 1 root root 87930 Sep 16 04:03 racadm I have tried these credentials after each attempt of changing the password: root/calvin root/newpassword admin/calvin admin/newpassword All have been unsuccessful. What is the next course of action that I should take?

  Read the article

• Battery life low on notebook using ubuntu 11.10 vs. windows 7

  - by les

  Im using a brand new Dell XPS notebook (bought mar 2012) which has 4.5 hrs battery life using a 6 cell battery-when i use windows 7. The machine uses an Intel core 17 2670qm processor, and a 64 bit operating system. I downloaded Ubuntu 11.10 and installed it on a USB drive, which is how i use it. I still have Windows 7 on the machine. When the machine is booting up I hit F12, and run Ubuntu from the flash drive instead of the machine booting Windows, as it normally would. On the Ubuntu menu, on the top right area, there is a battery menu, which shows how long to charge battery, or how much life left etc..with a fully charged battery the most Ubuntu will give me is 1.5 hrs. I've adjusted all power setting etc by clicking on the battery meter where i can make these adjustments, and have even turned down the brightness on the monitor. I've read through these questions here, and a user wrote to install Ubuntu 12(?)(the alpha version) when it's out this month(april), and this has better power management. Other forums (Ubuntu wiki) state that windows 7 controls power management effectively because it's configured to work with the hardware. I'd like to install Ubuntu and wipe windows but can't because of this issue. I need my notebook to go hours, not an hour and a bit. Can anybody recommend possibly a good software to use, that will work with the machines bios under Ubuntu? Another thought of mine, is- since I didn't yet wipe windows off my hard disk, is windows still possibly controlling the power mgmt aspect on the machine? I've thought of calling tech support at Dell and asking for help there, maybe Dell has something (a tweak?), I can download that'll work under Ubuntu. Looking forward to any help/suggestions i can get here, i'm really stuck on this..

  Read the article

• How to set a management IP on a Dell powerconnect 5524/5548 switch?

  - by John Little

  When you first power on a 5524, connected via the serial console, you are offered a setup wizard where you can enter the management IP/Net/Gateway and enter the admin password. HOWEVER, if you dont do this in 60 seconds, the wizard dissapears, and there seems to be no way to run it again - even if you reboot the box. No commands work in the CLI, it just gives you this prompt: If you type say enable, or login, it gives: >login Unknown parameter May be one from the following list: debug help So no commands seem to work. The CLI reference guide does not seem to have any way to run the wizard, or to set the management port or admin passwords. So by not responding in 60 secons after boot, the unit is bricked. Any ideas?

  Read the article

• i lsot the option of internet sharing after creating an ad hoc network on my dell laptop. how do bri

  - by alan alfred

  i created an ad hoc network...... after creating it used to show an option of enable internet sharing..... but after 3 days....it stopped working.... so i created another ad hoc network after deleting the old one...... but it did not show the option of enabling the internet connection..... how do i bring it back????????

  Read the article

• I lost the option of Internet sharing after creating an ad hoc network on my Dell laptop. How do I b

  - by alan alfred

  I created an ad hoc network. After creating it used to show an option of enable Internet sharing. But after 3 days it stopped working so I created another ad hoc network after deleting the old one. But it did not show the option of enabling the Internet connection. How do I bring it back?

  Read the article

• What is this Cable for? 4 Pin to 2 Pin from Riser to Perc in Dell R410

  - by Kyle Brandt

  I got a new raid card for a R410 server since the S300 that came with it doesn't support raid with Linux (No work around for this if SAS from what I could find). Anyways, the RAID card has 2 pins on it and there is a cable that that connects to a 4 pin connection on the riser. The cable only has two wires, one black and one red. What is this cable for? My guess would be maybe LED status for the front panel or something like that, but I am just guessing....

  Read the article

• Dell 2000FP monitor interpreting composite 60Hz signal as 50Hz - how to fix?

  - by Jim Buck

  I reset to factory settings to no avail, and there is no option to explicitly set the Hz of the incoming signal. The odd part is that this worked fine 1 month ago, but I had unplugged everything since and reconnected everything today.

  Read the article

• Do I need DELL OpenManage to generate snmp traps on RAID degradation?

  - by jishi

  I need to setup surveillance on all our servers to spot any RAID degradation in time. However, not all of our servers have OpenManage installed, and since they are in production I don't like the idea of installing it on them. Therefor: Is it necessary to have it installed in order to get an event-log for any degradation of the RAID? Because, if I get an event-log I can send an SNMP trap, if I understand it correctly. I thought it was the driver that responsible for the event-logging, but on a machine that recently had a degradation, I can't seem to find any log event for it.

  Read the article

• Can the features of Dell OpenManage be replaced by Microsoft System Center?

  - by bwerks

  Hi all, I'm new to both OpenManage and System Center, but it sounds as if they're geared towards similar problems/goals. Are the features comparable enough that OpenManage can be forgone completely in favor of System Center products? Specifically I'm hoping to achieve storage monitoring and remote administration, although if someone with experience with both wants to provide a quick compare/contrast (objective, of course) I won't complain. Thanks!

  Read the article

• Is there a way to obtain a Dell server's RAID configuration/level using only winrm/wsman? (ESXi servers)

  - by EGr

  I've seen videos describing how to configure RAID using wsman/winrm commands run against a server's iDRAC, but I can't seem to find anything that will just give me the current configuration and RAID levels. Is this possible? What uri would I use? If it matters, this is being run against M610s. Edit: If there is an easier way to obtain this information by running a script against the iDRAC, I'm not opposed to switching my methods. EDIT: The server is running ESXi, so if there is a way to obtain this through the vSphere client or PowerCLI, I can do that too. Overall, I just need a way to obtain the RAID configuration for multiple servers without having to query against the actual server (eg: via the iDRAC).

  Read the article

• Is it normal for the laptop charger to spark when plugging in?

  - by Cd-MaN

  All the laptop chargers I had until now sparked whever I plugged them in. This is true for my old charger (the bulkier / rounder Dell model) and the new charger (the flat Dell model) with two different Dell laptops, however until recently I didn't give it much thought. Then, in the last couple of months: I shorted out a conference room and melted the floor a little (the wire caught fire) The second charger (also a Dell original) died, taking the power strip with it I'm wondering: Is it normal for laptop chargers to spark when plugged in? Specifically new, original Dell chargers Is there a "correct" way to plug / unplug chargers? Do I need to first unplug it from the wall and then from the laptop / do I need to first plug it into the wall and then into the laptop? May the problem be caused by the fact that I leave sometimes the charger plugged into the wall without connecting the laptop for longer periods of time (up to a day)? PS. I'm talking about Europe, so 220V and this happens in many places (at home, at my parents, at work, in hotels I trave to, etc)

  Read the article

• Laptop monitor stopped working and can't be re-enabled on a Dell Latitude E6410

  - by xektrum

  I'm using Ubuntu 12.04 (upgraded from 11.10), everything seemed to work fine until today when my laptop monitor suddenly stopped working. Here are the facts: My laptop is a Dell Latitude E6410, Intel graphics. External Monitor is attached through a docking station. Everything worked fine for about 6-7 month, then upgraded to 12.04 Issue started today after a week of upgrade. I think the issue started after I ran CounterStrike 1.6, both monitors blinked and then only the attached monitor which is connected to a docking station continued to work I thought at first that was a transient issue but then I've rebooted, removed the battery but the same happens. Laptop Monitor and external monitor work fine up to login screen, but after I login it goes black Whenever I try to re-enable laptop monitor from Display Manager I get errors: The selected configuration for displays could not be applied could not set the configuration for CRTC 63 Not sure what technical details are required but here are some: $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected (normal left inverted right x axis y axis) 1440x900 60.0 + 40.0 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) $ tail /var/log/Xorg.0.log [ 8367.132] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.132] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy I'm using gnome-shell, and the only ways I've been able to get both display working have been: 1) Booting with laptop disconnected from docking and then re attach external with VGA instead of DVI, but only worked for a session. 2) Removing xserver-xorg-video-intel, but then I gnome-shell is gone as well as dri I would appreciate any suggestions. Regards, ============================= WORKAROUND FOUND ============================= So I have tried few things and here is what worked: I've installed a newer version of xserver-xorg-video-intel (2.19 vs 2.17) from ppa:xorg-edgers/ppa, it didn't work at first, it was only showing low graphics mode, so I tried with a different linux-image 3.0.0-19-generic-pae instead of 3.2.0-24-generic-pae, which I believe is 12.04 precise default, then everything started to work again, Now I've installed 3.4.0-1-generic-pae from same ppa and everything goes flawless so I believe the issue is either with linux-image 3.0.0-19-generic-pae or xserver-xorg-video-intel 2.17. Hope this helps someone in the future. PS: Now xrandr shows multiple modes for my laptop monitor $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected 1440x900+1680+0 (normal left inverted right x axis y axis) 303mm x 189mm 1440x900 60.0*+ 59.9 40.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis)

  Read the article

• Not recognizing second monitor after hibernate (Windows 7, Dell D630 laptop)

  - by Brooks Moses

  I have a Dell Latitude D630 laptop which I've recently updated to Windows 7 64-bit. (The Dell site confirms that it's Windows-7-compatible.) Normally it lives in a docking station with a second monitor connected to the DVI port on the docking station, and I use the second monitor in a multi-monitor configuration with the laptop screen. Sometimes I undock the laptop and use it separately. Here's the problem: If I hibernate the laptop while undocked, and then power it back up in the docking station, it does not recognize the second monitor. By which I mean that not only does it not share the desktop onto the second monitor, but if I go into the control panel for display settings and press "Detect", it does not even detect the existence of the second monitor. I can tell it to "use the VGA port anyway" for a second monitor, but the monitor is connected to a DVI port on the docking station, so that doesn't do anything useful. If I entirely reboot the laptop while it's connected to the docking station, it has no problem recognizing the second monitor and using it. But then, if I hibernate, undock, de-hibernate while undocked and rehibernate, and then re-dock and de-hibernate, it's back to not recognizing the second monitor again. I'm reasonably certain that this is not a limitation of the hardware; this worked fine on Windows XP. I'm currently using the Windows 7 driver for my video card. I attempted to use the video driver from the Dell website for this laptop, but Dell only provides Vista 64-bit drivers, not Windows 7 64-bit drivers. Their "Windows 7 compatibility" page suggests that the Vista drivers should work, but when I attempted to install the driver, it gave me a "this operating system not supported" error and refused to install. Any further ideas?

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >