Search Results

Search found 580 results on 24 pages for 'df'.

Page 21/24 | < Previous Page | 17 18 19 20 21 22 23 24  | Next Page >

• Significance in R

  - by Gemsie

  Ok, this is quite hard to explain, but I'm at a complete loss what to do. I'm a relative newcomer to R and although I can completely admire how powerful it is, I'm not too good at actually using it.... Basically, I have some very contrived data that I need to analyse (it wasn't me who chose this, I can assure you!). I have the right and left hand lengths of lots of people, as well as some numeric data that shows their sociability. Now I would like to know if people who have significantly different lengths of hand are more or less sociable than those who have the same (leading into the research that 'symmetrical' people are more sociable and intelligent, etc. I have got as far as loading the data into R, then I have no idea where to go from there. How on Earth do I start to separate those who are close to symmetrical to those who aren't to then start to do the analysis? Ok, using Sasha's great advice, I did the cor.test and got the following: Pearson's product-moment correlation data: measurements$l.hand - measurements$r.hand and measurements$sociable t = 0.2148, df = 150, p-value = 0.8302 alternative hypothesis: true correlation is not equal to 0 95 percent confidence interval: -0.1420623 0.1762437 sample estimates: cor 0.01753501 I have never used this test before, so am unsure how to intepret it...you wouldn't think I was on my fourth Scientific degree would you?! :(

  Read the article

• base destructor called twice after derived object?

  - by sil3nt

  hey there, why is the base destructor called twice at the end of this program? #include <iostream> using namespace std; class B{ public: B(){ cout << "BC" << endl; x = 0; } virtual ~B(){ cout << "BD" << endl; } void f(){ cout << "BF" << endl; } virtual void g(){ cout << "BG" << endl; } private: int x; }; class D: public B{ public: D(){ cout << "dc" << endl; y = 0; } virtual ~D(){ cout << "dd" << endl; } void f(){ cout << "df" << endl; } virtual void g(){ cout << "dg" << endl; } private: int y; }; int main(){ B b, * bp = &b; D d, * dp = &d; bp->f(); bp->g(); bp = dp; bp->f(); bp->g(); }

  Read the article

• Saving a single entity instead of the entire context - revisited

  - by nite

  I’m looking for a way to have fine grained control over what is saved using Entity Framework, rather than the whole ObjectContext.SaveChanges(). My scenario is pretty straight forward, and I’m quite amazed not catered for in EF – pretty basic in NHibernate and all other data access paradigms I’ve seen. I’m generating a bunch of data (in a WPF UI) and allowing the user to fine tune what is proposed and choose what is actually committed to the database. For the proposed entities I’m: getting a bunch of reference entities (eg languages) via my objectcontext, creating the proposed entities and assigning these reference entities to them (as navigation properties), so by virtue of their relationship to the reference entities they’re implicitly added to the objectconext Trying to create & save individual entites based on the proposed entities. I figure this should be really simple & trivial but everything I’ve tried I’ve hit a brick wall, either I set up another objectcontext & add just the entity I need (it then tries to add the whole graph and fails as it’s on another objectcontext). I’ve tried MergeOptions = NoTracking on my reference entities to try to get the Attach/AddObject not to navigate through these to create a graph, no avail. I've removed the navigation properties from the reference entities. I've tried AcceptAllChanges, that works but pretty useless in practice as I do still want to track & save other entities. In a simple test, I can create 2 of my proposed entities, AddObject the one I want to save and then Detach the one I dont then call SaveChanges, this works but again not great in practice. Following are a few links to some of the nifty ideas which in the end don’t help in the end but illustrate the complexity of EF for something so simple. I’m really looking for a SaveSingle/SaveAtomic method, and think it’s a pretty reasonable & basic ask for any DAL, letalone a cutting edge ORM. http://stackoverflow.com/questions/1301460/saving-a-single-entity-instead-of-the-entire-context www.codeproject.com/KB/architecture/attachobjectgraph.aspx?fid=1534536&df=90&mpp=25&noise=3&sort=Position&view=Quick&select=3071122&fr=1 bernhardelbl.spaces.live.com/blog/cns!DB54AE2C5D84DB78!238.entry

  Read the article

• FileNotFoundExcecption while inserting image into SDCard.

  - by Are

  Hi, I want to insert images into my SDCard.So I used below code m_cImagePath = "/sdcard/"+ String.format("%d.jpg", System.currentTimeMillis()); FileOutputStream lObjOutStream = null; try { lObjOutStream = new FileOutputStream(m_cImagePath); if (null != lObjOutStream && null != finalBitmap) { finalBitmap.compress(Bitmap.CompressFormat.JPEG, 85, lObjOutStream); lObjOutStream.close(); }catch(FileNotFoundException fe){ fe.printStackTrace(); } Sometimes it is giving FileNotFoundException even my SDCard had memory.When I remove some images from sdcard again it is working smoothly.Why this Happend?How can i know that file is inserted successfully in SDCard and Is there any functionality in Java1.5 to know available space of the SDCard like java 1.6?How can i know file length which is not before inserting into the SDCard(I searched in google and found that "when the file is not physically there then file.length() always gives 0" ).But before inserting i want to know the length of the file.Then Comparing this space to available SDCard space is simple. Note :I had an idea to use Unix command df sdcard using in Runtime class to found SDCard space. Please give me an idea in this problem. Regards, Android Developer

  Read the article

• Regular Expressions .NET

  - by Fosa

  I need a regular expression for some arguments that must match on a string. here it is... The string exists out of minimum 8 en maximum 20 characters. These characters of this string may be characters of the alfabet or special chars --With other words..all charachters except from the whitespaces In the complete string there must be atleast 1 number. The string cannot start with a number or an underscore The last 2 characters of the string must be identical, But it doenst matter if those last --identical characters are capital or non-capital (case insensitive) Must match all : +234567899 a_1de*Gg xy1Me*__ !41deF_hij2lMnopq3ss C234567890123$^67800 *5555555 sDF564zer"" !!!!!!!!!4!!!!!!!!!! abcdefghijklmnopq9ss May not match : Cannot be less then 8 or more then 20 chars: a_1+Eff B41def_hIJ2lmnopq3stt Cannot contain a whitespace: A_4 e*gg b41def_Hij2l nopq3ss Cannot start with a number or an underscore: __1+Eff 841DEf_hij2lmnopq3stt cannot end on 2 diffrent characters: a_1+eFg b41DEf_hij2lmnopq3st Cannot be without a number in the string: abCDefghijklmnopqrss abcdef+++dF !!!!!!!!!!!!!!!!!!!! ------------------------------------------------------ This is what I have so far...But I'm really breaking my head on this... If you Don't know the answer completely it's not a problem... I just want to get in the right direction ([^0-9_])(?=.*\d)(\S{8,20})(?i:[\S])\1

  Read the article

• selecting text by ignoring inner Elements of div tag javascript

  - by sugar

  <html> <body> <script language="javascript"> function getSelectionHTML() { var div = document.getElementById("myDiv").childNodes; if (document.createRange) { var textNode=div.firstChild; var rangeObj=document.createRange(); rangeObj.setStart(textNode,0); rangeObj.setEnd(textNode,10); selRange.collapse(true); var elem = document.getElementById('myDiv') elem .innerHTML = elem .innerHTML.replace(rangeObj.toString(), '<span style="background-color: lime">'+rangeObj.toString()+'</span>') } } </script> <div id="myDiv"> asdf as<b>dfas df asf asdf sdfjk dvh a sjkh jhcdjkv</b> iof scjahjkv ahsjv hdjk biud fcsvjksdhf k </div> <form name="aform"> <input type="button" value="Get selection" onclick="getSelectionHTML()"> </body> </html> Ok. Let me explain - getSelectionHTML() method is for selection of characters from 0 to 10. I am getting the values by "myDiv" id. but inner bold, italic & other tags are putting me in trouble. In simple words, I just want to make selection of first ten characters (& apply them span tag) which are in "myDiv" tag. What exactly I am missing ? Can anyone help me ? Thanks in advance for sharing your knowledge. Sagar.

  Read the article

• How do I use XPath with a default namespace with no prefix?

  - by Scott Stafford

  What is the XPath (in C# API to XDocument.XPathSelectElements(xpath, nsman) if it matters) to query all MyNodes from this document? <?xml version="1.0" encoding="utf-8"?> <configuration> <MyNode xmlns="lcmp" attr="true"> <subnode /> </MyNode> </configuration I tried /configuration/MyNode which is wrong because it ignores the namespace. I tried /configuration/lcmp:MyNode which is wrong because lcmp is the URI, not the prefix. I tried /configuration/{lcmp}MyNode which failed because Additional information: '/configuration/{lcmp}MyNode' has an invalid token. EDIT: I can't use mgr.AddNamespace("df", "lcmp"); as some of the answerers have suggested. That requires that the XML parsing program know all the namespaces I plan to use ahead of time. Since this is meant to be applicable to any source file, I don't know which namespaces to manually add prefixes for. It seems like {my uri} is the XPath syntax, but Microsoft didn't bother implementing that... true?

  Read the article

• plot an item map (based on difficulties)

  - by Tyler Rinker

  I have a data set of item difficulties that correspond to items on a questionnaire that looks like this: item difficulty 1 ITEM_6: I DESTROY THINGS BELONGING TO OTHERS 2.31179818 2 ITEM_11: I PHYSICALLY ATTACK PEOPLE 1.95215238 3 ITEM_5: I DESTROY MY OWN THINGS 1.93479536 4 ITEM_10: I GET IN MANY FIGHTS 1.62610855 5 ITEM_19: I THREATEN TO HURT PEOPLE 1.62188759 6 ITEM_12: I SCREAM A LOT 1.45137544 7 ITEM_8: I DISOBEY AT SCHOOL 0.94255210 8 ITEM_3: I AM MEAN TO OTHERS 0.89941812 9 ITEM_20: I AM LOUDER THAN OTHER KIDS 0.72752197 10 ITEM_17: I TEASE OTHERS A LOT 0.61792597 11 ITEM_9: I AM JEALOUS OF OTHERS 0.61288399 12 ITEM_4: I TRY TO GET A LOT OF ATTENTION 0.39947791 13 ITEM_18: I HAVE A HOT TEMPER 0.32209970 14 ITEM_13: I SHOW OFF OR CLOWN 0.31707701 15 ITEM_7: I DISOBEY MY PARENTS 0.20902108 16 ITEM_2: I BRAG 0.19923607 17 ITEM_15: MY MOODS OR FEELINGS CHANGE SUDDENLY 0.06023317 18 ITEM_14: I AM STUBBORN -0.31155481 19 ITEM_16: I TALK TOO MUCH -0.67777282 20 ITEM_1: I ARGUE A LOT -1.15013758 I want to make an item map of these items that looks similar (not exactly) to this (I created this in word but it lacks true scaling as I just eyeballed the scale). It's not really a traditional statistical graphic and so I don't really know how to approach this. I don't care what graphics system this is done in but I am more familiar with ggplot2 and base. I would greatly appreciate a method of plotting this sort of unusual plot. Here's the data set (I'm including it as I was having difficulty using read.table on the dataframe above): DF <- structure(list(item = structure(c(17L, 3L, 16L, 2L, 11L, 4L, 19L, 14L, 13L, 9L, 20L, 15L, 10L, 5L, 18L, 12L, 7L, 6L, 8L, 1L ), .Label = c("ITEM_1: I ARGUE A LOT", "ITEM_10: I GET IN MANY FIGHTS", "ITEM_11: I PHYSICALLY ATTACK PEOPLE", "ITEM_12: I SCREAM A LOT", "ITEM_13: I SHOW OFF OR CLOWN", "ITEM_14: I AM STUBBORN", "ITEM_15: MY MOODS OR FEELINGS CHANGE SUDDENLY", "ITEM_16: I TALK TOO MUCH", "ITEM_17: I TEASE OTHERS A LOT", "ITEM_18: I HAVE A HOT TEMPER", "ITEM_19: I THREATEN TO HURT PEOPLE", "ITEM_2: I BRAG", "ITEM_20: I AM LOUDER THAN OTHER KIDS", "ITEM_3: I AM MEAN TO OTHERS", "ITEM_4: I TRY TO GET A LOT OF ATTENTION", "ITEM_5: I DESTROY MY OWN THINGS", "ITEM_6: I DESTROY THINGS BELONGING TO OTHERS", "ITEM_7: I DISOBEY MY PARENTS", "ITEM_8: I DISOBEY AT SCHOOL", "ITEM_9: I AM JEALOUS OF OTHERS" ), class = "factor"), difficulty = c(2.31179818110545, 1.95215237740899, 1.93479536058926, 1.62610855327073, 1.62188759115818, 1.45137543733965, 0.942552101641177, 0.899418119889782, 0.7275219669431, 0.617925967008653, 0.612883990709181, 0.399477905189577, 0.322099696946661, 0.31707700560997, 0.209021078266059, 0.199236065264793, 0.0602331732900628, -0.311554806052955, -0.677772822413495, -1.15013757942119)), .Names = c("item", "difficulty" ), row.names = c(NA, -20L), class = "data.frame") Thank you in advance.

  Read the article

• Add two hexBinarys with XPATH 1.0

  - by fielding

  Hi, my xml document looks somewhat like that (Values are both xsl:hexBinary): <Offsets> <Offset> <Name>ErrorOffset</Name> <Value>DD</Value> </Offset> <Offset> <Name>OtherOffset</Name> <Value>FF</Value> </Offset> </Offsets> <Value> <Name>Error1</Name> <Code>01</Code> </Value> <Value> <Name>Error2</Name> <Code>02</Code> <Offset>ErrorOffset</Offset> </Value> now i want to transform this to a new xml file: <Value> <Name>Error1</Name> <Code>01</Code> </Value> <Value> <Name>Error2</Name> <Code>DF</Code> </Value> All that should happen is adding <Offset> to the basic <Value>. But plain + returns NaN and sum() expects only one parameter. XSLT and XPATH are quite nice, but it goes on my nerves that easy operations like adding two hex values just dont work as easy as it should.

  Read the article

• where is c function attribute set (how to unset) with gcc

  - by cvsdave

  I am working with code from the GNU core utils, and find that the void usage() function is apparently set with the attribute "noreturn". Well, I am modifying the function, and I wish it to return (I removed the call to exit()). The compiler still complains that a "noreturn" function returns, and when using the Eclipse CDT debugger, stepping thorugh the code is anomolous - I skip over lines of code. I do not see the function be set in the .c file, and there is no .h file for this .c file. The file is df.c. I have renamed the file df_call.c. How can the compiler be finding this attribute? How can I unset it? Thanks. ======= Thanks to all contributors for their help! The short answer is "the usage() function found in GNUutils 7.4 is prototyped in system.h as 'void usage (int status) ATTRIBUTE_NORETURN'. Changing to 'void usage (int status); /*ATTRIBUTE_NORETURN;*/' resolved the issue for me, but leaves the problem of a modified system.h. The long answer is: The GNU c compiler supports assigning attributes to functions (see http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html) one of which is "noreturn". The syntax is "attribute ((noreturn))" (see http://gcc.gnu.org/onlinedocs/gcc/Attribute-Syntax.html#Attribute-Syntax) but is often macro'd to ATTRIBUTE_NORETURN. If the attribute is set, and in this case one tries to return from the function, the executable compiles with a complaint, but compiles and runs. It will, however, behave unexpectedly (skipping over src lines in my case, maybe due to the optimization). The debugger in Eclipse CDT actually jumps past lines of code, leading the developer to doubt his senses.

  Read the article

• PC to USB transfer slow

  - by Vipin Ms

  I'm having trouble with USB transfer,not with external hard disk. Transfer starts with like, for the transfer of 700MB file it starts with 30mb/s and towards the end it stops at 0s and stays put for like 3-4 mins to transfer the last bit. I have tried different USB devices, but no luck. Is it a bug? Another important point is, in Kubuntu there is no such issue. So is it something related to Gnome? I'm using Ubuntu 11.10 64bit. Somebody please help, it's really annoying. Here are the details. PC all of my drives are in ext4. USB I tried ext3,ntfs and fat32. All having the same problem. Here are my USB controllers details: root@LAB:~# lspci|grep USB 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) Here is an example of one transfer. I connected one of my 4GB usb device. Nov 24 12:01:25 LAB kernel: [ 1175.082175] userif-2: sent link up event. Nov 24 12:01:25 LAB kernel: [ 1695.684158] usb 2-2: new high speed USB device number 3 using ehci_hcd Nov 24 12:01:25 LAB mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" Nov 24 12:01:26 LAB mtp-probe: bus: 2, device: 3 was not an MTP device Nov 24 12:01:26 LAB kernel: [ 1696.132680] usbcore: registered new interface driver uas Nov 24 12:01:26 LAB kernel: [ 1696.142528] Initializing USB Mass Storage driver... Nov 24 12:01:26 LAB kernel: [ 1696.142919] scsi4 : usb-storage 2-2:1.0 Nov 24 12:01:26 LAB kernel: [ 1696.143146] usbcore: registered new interface driver usb-storage Nov 24 12:01:26 LAB kernel: [ 1696.143150] USB Mass Storage support registered. Nov 24 12:01:27 LAB kernel: [ 1697.141657] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS Nov 24 12:01:27 LAB kernel: [ 1697.168827] sd 4:0:0:0: Attached scsi generic sg2 type 0 Nov 24 12:01:27 LAB kernel: [ 1697.169262] sd 4:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB) Nov 24 12:01:27 LAB kernel: [ 1697.169762] sd 4:0:0:0: [sdb] Write Protect is off Nov 24 12:01:27 LAB kernel: [ 1697.169767] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 Nov 24 12:01:27 LAB kernel: [ 1697.171386] sd 4:0:0:0: [sdb] No Caching mode page present Nov 24 12:01:27 LAB kernel: [ 1697.171391] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 24 12:01:27 LAB kernel: [ 1697.173503] sd 4:0:0:0: [sdb] No Caching mode page present Nov 24 12:01:27 LAB kernel: [ 1697.173510] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 24 12:01:27 LAB kernel: [ 1697.175337] sdb: sdb1 After that I initiated one transfer. lsof -p 3575|tail -2 mv 3575 root 3r REG 8,8 1719599104 4325379 /media/Misc/The Tree of Life (2011) DVDRip XviD-MAXSPEED/The Tree of Life (2011) DVDRip XviD-MAXSPEED www.torentz.3xforum.ro.avi mv 3575 root 4w REG 8,17 1046347776 15 /media/SREE/The Tree of Life (2011) DVDRip XviD-MAXSPEED/The Tree of Life (2011) DVDRip XviD-MAXSPEED www.torentz.3xforum.ro.avi Here are the total time spent on that transfer. root@LAB:/media/SREE# time mv /media/Misc/The\ Tree\ of\ Life\ \(2011\)\ DVDRip\ XviD-MAXSPEED/ /media/SREE/ real 11m49.334s user 0m0.008s sys 0m5.260s root@LAB:/media/SREE# df -T|tail -2 /dev/sdb1 vfat 3918344 1679308 2239036 43% /media/SREE /dev/sda8 ext4 110110576 60096904 50013672 55% /media/Misc Do you think this is normal?? Approximately 12 minutes for 1.6Gb transfer? Thanks.

  Read the article

• Swap not available on System Monitor

  - by Zaki

  I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

  Read the article

• Not enough free disk space

  - by carmatt95

  I'm new to Ubuntu and I'm getting an error in software updater. When I try and do my daily updates, it says: The upgrade needs a total of 25.3 M free space on disk /boot. Please free at least an additional 25.3 M of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean. I tried typing in sudo apt-get clean into the terminal but I still get the message. All of the pages I read seem to be for experianced Ubuntuers. Any help would be appreciated. I'm running Ubuntu 12.10. I want to upgrade to 13.04 but understand I have to finish these first. EDIT: @Alaa, This is the output from typing in cat /etc/fstab into the terminal: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/ubuntu-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=fa55c082-112d-4b10-bcf3-e7ffec6cebbc /boot ext2 defaults 0 2 /dev/mapper/ubuntu-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 matty@matty-G41M-ES2L:~$ df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 915G 27G 842G 4% / udev 984M 4.0K 984M 1% /dev tmpfs 397M 1.1M 396M 1% /run none 5.0M 0 5.0M 0% /run/lock none 992M 1.8M 990M 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda1 228M 222M 0 100% /boot matty@matty-G41M-ES2L:~$ dpkg -l | grep linux-image: ii linux-image-3.5.0-17-generic 3.5.0-17.28 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-18-generic 3.5.0-18.29 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-19-generic 3.5.0-19.30 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-21-generic 3.5.0-21.32 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-22-generic 3.5.0-22.34 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-23-generic 3.5.0-23.35 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-24-generic 3.5.0-24.37 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-25-generic 3.5.0-25.39 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-26-generic 3.5.0-26.42 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP iF linux-image-3.5.0-28-generic 3.5.0-28.48 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP

  Read the article

• Shrinking a Linux OEL 6 virtual Box image (vdi) hosted on Windows 7

  - by AndyBaker

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Recently for a customer demonstration there was a requirement to build a virtual box image with Oracle Enterprise Manager Cloud Control 12c. This meant installing OEL Linux 6 as well as creating an 11gr2 database and Oracle Enterprise Manager Cloud Control 12c on a single virtual box. Storage was sized at 300Gb using dynamically allocated storage for the virtual box and about 10Gb was used for Linux and the initial build. After copying over all the binaries and performing all the installations the virtual box became in the region of 80Gb used size on the host operating system, however internally it only really needed around 20Gb. This meant 60Gb had been used when copying over all the binaries and although now free was not returned to the host operating system due to the growth of the virtual box storage '.vdi' file.  Once the ‘vdi’ storage had grown it is not shrunk automatically afterwards. Space is always tight on the laptop so it was desirable to shrink the virtual box back to a minimal size and here is the process that was followed. Install 'zerofree' Linux package into the OEL6 virtual box The RPM was downloaded and installed from a site similar to below; http://rpm.pbone.net/index.php3/stat/4/idpl/12548724/com/zerofree-1.0.1-5.el5.i386.rpm.html A simple internet search for ’zerofree Linux rpm’ was easy to perform and find the required rpm. Execute 'zerofree' package on the desired Linux file system To execute this package the desired file system needs to be mounted read only. The following steps outline this process. As root: # umount /u01 As root:# mount –o ro –t ext4 /u01 NOTE: The –o is options and the –t is the file system type found in the /etc/fstab. Next run zerofree against the required storage, this is located by a simple ‘df –h’ command to see the device associated with the mount. As root:# zerofree –v /dev/sda11   NOTE: This takes a while to run but the ‘-v’ option gives feedback on the process. What does Zerofree do? Zerofree’s purpose is to go through the file system and zero out any unused sectors on the volume so that the later stages can shrink the virtual box storage obtaining the free space back. When zerofree has completed the virtual box can be shutdown as the last stage is performed on the physical host where the virtual box vdi files are located. Compact the virtual box ‘.vdi’ files The final stage is to get virtual box to shrink back the storage that has been correctly flagged as free space after executing zerofree. On the physical host in this case a windows 7 laptop a DOS window was opened. At the prompt the first step is to put the virtual box binaries onto the PATH. C:\ >echo %PATH%   The above shows the current value of the PATH environment variable. C:\ >set PATH=%PATH%;c:\program files\Oracle\Virtual Box;   The above adds onto the existing path the virtual box binary location. C:\>cd c:\Users\xxxx\OEL6.1   The above changes directory to where the VDI files are located for the required virtual box machine. C:\Users\xxxxx\OEL6.1>VBoxManage.exe modifyhd zzzzzz.vdi compact  NOTE: The zzzzzz.vdi is the name of the required vdi file to shrink. Finally the above command is executed to perform the compact operation on the ‘.vdi’ file(s). This also takes a long time to complete but shrinks the VDI file back to a minimum size. In the case of the demonstration virtual box OEM12c this reduced the virtual box to 20Gb from 80Gb which was a great outcome to achieve.

  Read the article

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either.

  Read the article

• Solaris10 x86 mirror. Making second disk booteable when failure

  - by Kani

  Did a mirror (RAID1) with Solaris 10 in x86. Everything OK. Now, I´m trying to make the second disk booteable, this is: from grub or in case of failure of disk1. I edited /boot/grub/menu.lst: #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris 10 9/10 s10x_u9wos_14a X86 findroot (rootfs1,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot -s module /boot/amd64/x86.miniroot-safe #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe #---------------------END BOOTADM-------------------- #Make second disk booteable!!!!!!! title alternate boot findroot (rootfs1,1,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe But is not working. In the BIOS, when I select "alternate boot" I get: Error 15: 15 file not found also, how to configure to GRUB to make the disk2 to boot in case of error in disk1? Additionally, I did (but not related to GRUB): eeprom altbootpath=/devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a Here is the output of some commands that may help you: /sbin/biosdev 0x80 /pci@0,0/pci108e,5352@1f,2/disk@0,0 0x81 /pci@0,0/pci108e,5352@1f,2/disk@1,0 ls -l /dev/dsk/c1t?d0s0 lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t0d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@0,0:a lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t1d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a more /boot/solaris/bootenv.rc setprop ata-dma-enabled '1' setprop atapi-cd-dma-enabled '0' setprop ttyb-rts-dtr-off 'false' setprop ttyb-ignore-cd 'true' setprop ttya-rts-dtr-off 'false' setprop ttya-ignore-cd 'true' setprop ttyb-mode '9600,8,n,1,-' setprop ttya-mode '9600,8,n,1,-' setprop lba-access-ok '1' setprop prealloc-chunk-size '0x2000' setprop bootpath '/pci@0,0/pci108e,5352@1f,2/disk@0,0:a' setprop keyboard-layout 'US-English' setprop console 'text' setprop altbootpath '/pci@0,0/pci108e,5352@1f,2/disk@1,0:a' cat /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - #/dev/dsk/c1t0d0s1 - - swap - no - /dev/md/dsk/d1 - - swap - no - /dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no - /devices - /devices devfs - no - sharefs - /etc/dfs/sharetab sharefs - no - ctfs - /system/contract ctfs - no - objfs - /system/object objfs - no - swap - /tmp tmpfs - yes - df -h Filesystem size used avail capacity Mounted on /dev/md/dsk/d0 909G 11G 889G 2% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 14G 972K 14G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab /usr/lib/libc/libc_hwcap1.so.1 909G 11G 889G 2% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 14G 40K 14G 1% /tmp swap 14G 28K 14G 1% /var/run

  Read the article

• IKE Phase 1 Aggressive Mode exchange does not complete

  - by Isaac Sutherland

  I've configured a 3G IP Gateway of mine to connect using IKE Phase 1 Aggressive Mode with PSK to my openswan installation running on Ubuntu server 12.04. I've configured openswan as follows: /etc/ipsec.conf: version 2.0 config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn net-to-net authby=secret left=192.168.0.11 [email protected] leftsubnet=10.1.0.0/16 leftsourceip=10.1.0.1 right=%any [email protected] rightsubnet=192.168.127.0/24 rightsourceip=192.168.127.254 aggrmode=yes ike=aes128-md5;modp1536 auto=add /etc/ipsec.secrets: @left.paxcoda.com @right.paxcoda.com: PSK "testpassword" Note that both left and right are NAT'd, with dynamic public IP's. My left ISP gives my router a public IP, but my right ISP gives me a shared dynamic public IP and dynamic private IP. I have dynamic dns for the public ip on the left side. Here is what I see when I sniff the ISAKMP protocol: 21:17:31.228715 IP (tos 0x0, ttl 235, id 43639, offset 0, flags [none], proto UDP (17), length 437) 74.198.87.93.49604 > 192.168.0.11.isakmp: [udp sum ok] isakmp 1.0 msgid 00000000 cookie da31a7896e2a1958->0000000000000000: phase 1 I agg: (sa: doi=ipsec situation=identity (p: #1 protoid=isakmp transform=1 (t: #1 id=ike (type=enc value=aes)(type=keylen value=0080)(type=hash value=md5)(type=auth value=preshared)(type=group desc value=modp1536)(type=lifetype value=sec)(type=lifeduration len=4 value=00015180)))) (ke: key len=192) (nonce: n len=16 data=(da31a7896e2a19582b33...0000001462b01880674b3739630ca7558cec8a89)) (id: idtype=FQDN protoid=0 port=0 len=17 right.paxcoda.com) (vid: len=16) (vid: len=16) (vid: len=16) (vid: len=16) 21:17:31.236720 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 456) 192.168.0.11.isakmp > 74.198.87.93.49604: [bad udp cksum 0x649c -> 0xcd2f!] isakmp 1.0 msgid 00000000 cookie da31a7896e2a1958->5b9776d4ea8b61b7: phase 1 R agg: (sa: doi=ipsec situation=identity (p: #1 protoid=isakmp transform=1 (t: #1 id=ike (type=enc value=aes)(type=keylen value=0080)(type=hash value=md5)(type=auth value=preshared)(type=group desc value=modp1536)(type=lifetype value=sec)(type=lifeduration len=4 value=00015180)))) (ke: key len=192) (nonce: n len=16 data=(32ccefcb793afb368975...000000144a131c81070358455c5728f20e95452f)) (id: idtype=FQDN protoid=0 port=0 len=16 left.paxcoda.com) (hash: len=16) (vid: len=16) (pay20) (pay20) (vid: len=16) However, my 3G Gateway (on the right) doesn't respond, and I don't know why. I think left's response is indeed getting through to my gateway, because in another question, I was trying to set up a similar scenario with Main Mode IKE, and in that case it looks as though at least one of the three 2-way main mode exchanges succeeded. What other explanation for the failure is there? (The 3G Gateway I'm using on the right is a Moxa G3150, by the way.)

  Read the article

• ubuntu eth0 not reconnecting after cable unplugged

  - by Alex

  I'm running kubuntu 9.10 w/ gnome, I have a static IP defined in /etc/network/interfaces When I unplugged my network cable and rebooted, then reconnected the network cable I was not able to connect. I tried using sudo ifup eth0, and then ifconfig and it seemed as though the IP address had been assigned and I was connected, but I wasn't. I then did ifdown eth0, and again ifup eth0. For some reason I'm not able to access the network. Furthermore, I also attempted to connect via wlan, and was able to connect to the wireless network, but cannot "see" the network. I can't transfer data or access the internet or anything on the network including the router. How do I resolve this? topsy@monolyth:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:25:1c:df:70 inet addr:192.168.1.145 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:25ff:fe1c:df70/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5720 errors:0 dropped:0 overruns:0 frame:0 TX packets:565 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:378035 (378.0 KB) TX bytes:46832 (46.8 KB) Memory:fe000000-fe020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) By access the network I mean the local network as well as the internet. topsy@monolyth:~$ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=9.14 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1.24 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.01 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.00 ms [snip... all OK, icmp_seq from 5-30, time between 0.981-1.25ms] ^C --- 192.168.1.1 ping statistics --- 30 packets transmitted, 30 received, 0% packet loss, time 29035ms rtt min/avg/max/mdev = 0.971/1.300/9.140/1.458 ms topsy@monolyth:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 root@monolyth:~# cat /etc/resolv.conf # Generated by NetworkManager

  Read the article

• Has the hardware in my modem gone bad?

  - by Tyler Scott

  I contacted CenturyLink about my modem recently and received useless and unrelated information. The problem seems to be that the modem will no longer save settings, the web interface is unusable except in internet explorer for some reason, and the modem keeps resetting. CenturyLink claimed it had to do with signal strength but I checked and it is currently between good and outstanding according to this. All of the lights remain green even when it starts acting up and I lose internet and shortly before it crashes and reboots. Does anyone have any idea what is going on or what I can do to fix it? (Asking CenturyLink again is obviously not going to help.) Update 1: Accessing the syslog from the web interface causes a crash. After it reboots, the log looks like as follows: 01/01/1970 12:01:29 AM Ethernet Ethernet client connected ,ip(192.168.0.2), mac(1c:6f:65:4c:6d:3b) 01/01/1970 12:01:38 AM Wireless 802.11 client connected ,ip(192.168.0.18), mac(d0:df:c7:c2:73:ca) 01/01/1970 12:01:41 AM System Event Line 0: VDSL2 link up, Bearer 0, us=20128, ds=40127 01/01/1970 12:01:43 AM dhcp6s[2028] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:50 AM dhcp6s[2469] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:52 AM radvd[2306] poll error: Interrupted system call 01/01/1970 12:01:56 AM PPP Link PPP server detected. 01/01/1970 12:01:56 AM PPP Link PPP session established. 01/01/1970 12:01:56 AM PPP Link PPP LCP UP. 01/01/1970 12:01:56 AM System Event Received valid IP address from server. Connection UP. 06/05/2014 08:16:01 AM radvd[2511] poll error: Interrupted system call 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM dhcp6s[3236] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 06/05/2014 08:16:08 AM Wireless 802.11 client connected ,ip(192.168.0.7), mac(44:6d:57:c4:d7:08) I also get it to crash on various other pages. I am guessing the web server is unstable.

  Read the article

• Log - Server kernel: INFO: task httpd:000000 blocked for more than 120 seconds

  - by valter

  Almost everyday my server is crashing due to hight server load, and even restarting apache or mysql can't solve the problem. I need to reboot the server to solve, or it crash again due to the high load. The log system records something like this when it crashes: Aug 11 18:33:53 server kernel: INFO: task httpd:20008 blocked for more than 120 seconds. Aug 11 18:33:53 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 11 18:33:53 server kernel: httpd D ffffffff801538ac 0 20008 5816 20066 19809 (NOTLB) Aug 11 18:33:53 server kernel: ffff81025a299dc8 0000000000000082 ffff81033b4c0740 ffffffff80009a14 Aug 11 18:33:53 server kernel: ffff8101063f8d80 0000000000000009 ffff8100b758f7e0 ffff8101c57187e0 Aug 11 18:33:53 server kernel: 00009436d4100b6c 000000000001d50f ffff8100b758f9c8 000000083b531588 Aug 11 18:33:53 server kernel: Call Trace: Aug 11 18:33:53 server kernel: [<ffffffff80009a14>] __link_path_walk+0x173/0xfb9 Aug 11 18:33:53 server kernel: [<ffffffff8002cc16>] mntput_no_expire+0x19/0x89 Aug 11 18:33:53 server kernel: [<ffffffff80063c4f>] __mutex_lock_slowpath+0x60/0x9b Aug 11 18:33:53 server kernel: [<ffffffff80023908>] __path_lookup_intent_open+0x56/0x97 Aug 11 18:33:53 server kernel: [<ffffffff80063c99>] .text.lock.mutex+0xf/0x14 Aug 11 18:33:53 server kernel: [<ffffffff8001b21f>] open_namei+0xea/0x712 Aug 11 18:33:54 server kernel: [<ffffffff8002768a>] do_filp_open+0x1c/0x38 Aug 11 18:33:54 server kernel: Firewall: *UDP_IN Blocked* IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:30:48:9e:6e:99:08:00 SRC=208.43.135.158 DST=255.255.255.255 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=38354 DPT=6112 LEN=131 Aug 11 18:33:54 server kernel: [<ffffffff8001a061>] do_sys_open+0x44/0xbe Aug 11 18:33:54 server kernel: [<ffffffff8005d28d>] tracesys+0xd5/0xe0 I googled a lot trying to find a solution. But it looks that the solution is just to update the kernel or disk driver, thinks that I don't know how to do. In this url http://bugs.centos.org/view.php?id=4515 a lot o people report similar problems, except the fact that they are not related to httpd like mine. According to one member, one solution would be to add "elevator=noop " to /etc/grub.conf like in this example: title CentOS (2.6.18-238.12.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-238.12.1.el5xen ro root=/dev/VolGroup00/LogVol00 elevator=noop initrd /initrd-2.6.18-238.12.1.el5xen.img Would this really solve the problem? My disk are working in RAID. Can this cause some problem to my server? Is there any other solution?

  Read the article

• Resizing Partitions on Live RHEL/cPanel Server

  - by Timothy R. Butler

  I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

  Read the article

• ssh refuses to authenticate keys

  - by MixturaDementiae

  So I am setting up a connection between my machine [fedora 17] and a virtual machine running in Virtual Box in which is running CentOS 5. I have installed openssh from the repositories on CentOS, and I have configured everything as it follows: Protocol 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key SyslogFacility AUTHPRIV PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile /home/pigreco/.ssh/authorized_keys PasswordAuthentication no ChallengeResponseAuthentication yes GSSAPIAuthentication yes GSSAPICleanupCredentials yes UsePAM yes AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE AcceptEnv XMODIFIERS X11Forwarding yes Subsystem sftp /usr/libexec/openssh/sftp-server this is the configuration file sshd_config on the server i.e. on the CentOS. Moreover I have created a public/private key pair as usual on the .ssh/ folder in my home directory in my OS, i.e. Fedora, and then I've copied with scp the id_rsa.pub to the server and then I have appended its content to the file .ssh/authorized_keys on the server machine. The error that I get is the following: OpenSSH_5.9p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 50: Applying options for * debug1: Connecting to 192.168.100.13 [192.168.100.13] port 22. debug1: Connection established. debug1: identity file /home/mayhem/.ssh/identity type -1 debug1: identity file /home/mayhem/.ssh/identity-cert type -1 debug1: identity file /home/mayhem/.ssh/id_rsa type 1 debug1: identity file /home/mayhem/.ssh/id_rsa-cert type -1 debug1: identity file /home/mayhem/.ssh/id_dsa type -1 debug1: identity file /home/mayhem/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 16:e5:72:d1:37:94:1b:5e:3d:3a:e5:da:6f:df:0c:08 debug1: Host '192.168.100.13' is known and matches the RSA host key. debug1: Found key in /home/mayhem/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/mayhem/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 279 Agent admitted failure to sign using the key. debug1: Trying private key: /home/mayhem/.ssh/identity debug1: Trying private key: /home/mayhem/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive Do you have some good suggestion of what I can do? thank you

  Read the article

• Ubuntu with KVM guest VM and broken bridges

  - by MadPsy

  I have an Ubuntu box with a KVM guest VM running. They use bridging so the guest VM attaches to the physical network of its host. The guest VM has 2 NICs in 2 different bridges. First NIC of the VM is tap5 and is in bridge br0 br0 8000.46720f5c572e no eth0.500 tap5 Second NIC of the VM is tap2 and is in bridge br100 br100 8000.76ad2fc96661 no eth0.100 eth0.101 eth0.103 eth0.104 eth0.105 tap2 On the host, br0 has an IP and br100 does not 21: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 46:72:0f:5c:57:2e brd ff:ff:ff:ff:ff:ff inet 192.168.100.4/24 brd 192.168.10.255 scope global br0 inet6 fe80::d6ae:52ff:febe:777/64 scope link valid_lft forever preferred_lft forever On the guest, its eth0 and eth1 interfaces both have IP addresses 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:3e:61:fb:7a:da brd ff:ff:ff:ff:ff:ff inet 192.168.100.6/24 brd 192.168.100.255 scope global eth0 inet6 fe80::23e:61ff:fefb:7ada/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:3e:61:fb:7a:ea brd ff:ff:ff:ff:ff:ff inet 172.16.50.129/25 brd 172.16.50.255 scope global eth1 inet6 fe80::23e:61ff:fefb:7aea/64 scope link valid_lft forever preferred_lft forever On the guest VM, a tcpdump of its eth1 interface (tap2) shows traffic from its eth0 interface (tap5), as if the 2 bridges are themselves bridged. This means any interface on br100 is now bridged across to br0 - which is completely broken. root@chillispot:~# tcpdump -c 1 -n -v -i eth1 net 192.168.100.0/24 tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 16:31:24.175583 IP (tos 0x0, ttl 64, id 48054, offset 0, flags [DF], proto TCP (6), length 148) 192.168.100.6.22 > 192.168.100.4.59505: Flags [P.], cksum 0x6c2b (correct), seq 1056321648:1056321744, ack 398642983, win 1700, options [nop,nop,TS val 197473436 ecr 200655363], length 96 What could be bridging the 2 bridges, except the guest VM (which is a stock Ubuntu install)? I am at a complete loss! Thanks.

  Read the article

• Network unreachable on Ubuntu guest after trying to set up a host only network on Virtualbox

  - by gkb0986

  I have a Mac OS X host and a bunch of guests including Ubuntu and Arch Linux. I was trying to set up a host-only network at eth1 to let me ssh into the system. But now eth0 isn't working properly either. Ubuntu can no longer connect to remote hosts or browse the internet. It tells me that the network is unreachable. What's gone wrong here? I've included some diagnostics below. $ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10968 errors:0 dropped:0 overruns:0 frame:0 TX packets:10968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:897264 (897.2 KB) TX bytes:897264 (897.2 KB) Other diagnostic commands and the output: $sudo lspci -n 00:00.0 0600: 8086:1237 (rev 02) 00:01.0 0601: 8086:7000 00:01.1 0101: 8086:7111 (rev 01) 00:02.0 0300: 80ee:beef 00:03.0 0200: 8086:100e (rev 02) 00:04.0 0880: 80ee:cafe 00:05.0 0401: 8086:2415 (rev 01) 00:06.0 0C03: 106B:003F 00:07.0 0680: 8086:7113 (REV 08) 00:0D.0 0106: 8086:2829 (REV 02) $sudo lshw -c network *-network DISABLED description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:7d:22:df size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full firmware=N/A latency=64 link=no mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) $lsmod Module Size Used by nls_utf8 12557 1 isofs 40257 1 vboxsf 43743 2 vesafb 13844 1 snd_intel8x0 38570 2 snd_ac97_codec 134869 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97275 2 snd_intel8x0,snd_ac97_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi rfcomm 47604 0 snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event bnep 18281 2 bluetooth 180113 10 rfcomm,bnep ppdev 17113 0 psmouse 97519 0 snd_timer 29990 2 snd_pcm,snd_seq joydev 17693 0 snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq vboxvideo 12622 1 serio_raw 13211 0 snd 79041 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd vboxguest 235498 7 vboxsf parport_pc 32866 0 drm 241971 2 vboxvideo i2c_piix4 13301 0 snd_page_alloc 18529 2 snd_intel8x0,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usbhid 47238 0 hid 99636 1 usbhid e1000 108589 0

  Read the article

• some files just wont install- linux-image-3.5.0-42-generic

  - by jatin

  It gives the following details of the package operation failing after using the sofware updater on 12.10: installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 217566 files and directories currently installed.) Preparing to replace linux-image-3.5.0-36-generic 3.5.0-36.57~precise1 (using .../linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-36-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-36-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic Preparing to replace linux-image-3.5.0-42-generic 3.5.0-42.65~precise1 (using .../linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-42-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-42-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Preparing to replace memtest86+ 4.20-1.1ubuntu1 (using .../memtest86+_4.20-1.1ubuntu2.1_amd64.deb) ... Unpacking replacement memtest86+ ... dpkg: error processing /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb (--unpack): unable to make backup link of `./boot/memtest86+.bin' before installing new version: Operation not permitted No apport report written because MaxReports is reached already locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb Error in function: Output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda6 38G 6.5G 30G 19% / udev 3.5G 4.0K 3.5G 1% /dev tmpfs 1.5G 924K 1.5G 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 3.6G 296K 3.6G 1% /run/shm none 100M 64K 100M 1% /run/user /dev/sda1 197M 87M 111M 44% /boot /dev/sda5 243G 971M 230G 1% /home

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24  | Next Page >