Search Results

Search found 4063 results on 163 pages for 'intel'.

Page 21/163 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Sd card bigger than 2gb is not recognized in ubuntu 12.04

  - by dex1

  When I insert a card up to 2gb it is immediately seen by the system but if try it with bigger one it's not seen. I presume the issue is not due to the card reader itself as it reads all cards under windows 7 but due to linux driver. I could see some people having similar issues but no solution. Any help appreciated. GParted doesnt see cards bigger than 2gb. After insertion small card ubuntu@ubuntu:~$ dmesg [10169.384481] mmc0: new SD card at address a95c [10169.384870] mmcblk0: mmc0:a95c SD016 14.0 MiB [10169.386715] mmcblk0: p1 everything worked fine then I removed the small one and put 8gb, waited for 2min [10295.736422] mmc0: card a95c removed [10362.448383] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10372.480076] mmc0: Timeout waiting for hardware interrupt. [10382.496146] mmc0: Timeout waiting for hardware interrupt. [10392.512149] mmc0: Timeout waiting for hardware interrupt. [10402.528145] mmc0: Timeout waiting for hardware interrupt. [10402.529267] mmc0: error -110 whilst initialising SD card [10402.748807] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10412.768063] mmc0: Timeout waiting for hardware interrupt. [10422.784051] mmc0: Timeout waiting for hardware interrupt. [10432.800076] mmc0: Timeout waiting for hardware interrupt. [10442.816067] mmc0: Timeout waiting for hardware interrupt. [10442.817165] mmc0: error -110 whilst initialising SD card [10443.040805] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10453.056145] mmc0: Timeout waiting for hardware interrupt. [10463.072139] mmc0: Timeout waiting for hardware interrupt. [10473.088050] mmc0: Timeout waiting for hardware interrupt. [10483.104046] mmc0: Timeout waiting for hardware interrupt. [10483.104107] mmc0: error -110 whilst initialising SD card [10483.328960] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10493.344144] mmc0: Timeout waiting for hardware interrupt. ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 16) 0a:01.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 0a:01.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 0a:01.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) Same cards, same machine (same reader) only different OS(win7) work flawlessly. Some interesting reading I came across but is Chinese for me http://www.mail-archive.com/[email protected]/msg14598.html and another bit http://article.gmane.org/gmane.linux.kernel.mmc/11973/match=sd+card+not+recognized

  Read the article

• PC Building: Intel's Turbo Boost vs AMD's Turbo Core

  <b>PC Business: </b>"Even now there are few applications that take full advantage of multicore processers. For those that do the benefits are huge, but some applications just don't work well in a multithreaded environment."

  Read the article

• Cannot get 3D OpenGL support in Vmware guests, how can I fix this?

  - by jjapol

  I have been working at this problem for 2 days now. I cannot for the life of me enable 3D support in VMWare 9 guests. My specifications are: Hardware: Dell Latitude E5520 laptop. Processor: Intel i7-2620M CPU @ 2.70GHz × 4. Memory: 8GB. Video: Intel Sandybridge Mobile x86/MMX/SSE2 OS: Ubuntu 12.04.1 LTS, 32 bit. Vmware Workstation: 9.0.1 build-894247 Glxgears functions fine. Frame rate is ~60fps. Vmware guest: Windows 7 Starting the Windows 7 guest in VMware throws the following errors: No 3D support is available from the host. and Hardware graphics acceleration is not available. I've read through this VMware forum thread, but again the hardware in the post is different (nVidia). I've followed the instructions at this Ask Ubuntu post as closely as possible as the question is nearly the same as mine although my hardware is different. Answer 1 regarding setting mks.gl.allowBlacklistedDrivers = TRUE; in my vmx configuration file causes the VM to crash when it starts. The second answer I followed as closely as possible. I uninstalled VMware, Did sudo apt-get install build-essential linux-headers-$(uname -r) at a terminal, Added the PPA https://launchpad.net/~glasen/+archive/intel-driver, Then at a terminal did sudo apt-get update && sudo apt-get upgrade -y I reinstalled VMware and have the same results: no 3D in guests. I'm getting the feeling that something is awry with the Sandy Bridge driver, but I can't seem to come up with any solutions. Has anyone out there run across this problem also? By the way, the operation of the likes of Solidworks and AutoCad within a Windpws 7 guest does appear to be improved in VMware 9 vs VMware 8 in spite of the fact that 3D support is lacking in the Windows 7 guest. I'd also add that my glxinfo file was nearly identical to the glxinfo file posted at askubuntu.com/questions/181829/…. I had a total of seven minor differences per a comparison using Meld. –

  Read the article

• Ubuntu 13.10 and Dell Inspiron 7520 SE (Intel 4000 and ATI radeon HD 7730m)

  - by pjgowtham

  I installed 13.10 and i have problems with my display. Everything else works fine. I cant control my brightness. I thought the graphics driver is the problem. So i went to software updates, switched to another driver (proprietary) and the Ubuntu screen went black and i wasn't able to boot either. I cant use my lap with such low brightness. Then i reinstalled 13.10 again, This time full hdd reset. Same problem occurred. I grabbed radeon hd7730m for Linux x64 from the amd site, installed it, and the screen went black with only the "x" cursor showing on the next boot. What should i need to do to make my brightness work and stabilize graphic cards as mine is switchable graphics type.

  Read the article

• Calling COM from Intel Fortran?

  - by user57460

  I'm trying to get COM working from my Fortran application. I do a "COMINITIALIZE" followed by a "COMCreateObjectByProgID". Both of these appear to be successful and return a status of zero. However, when I try to use the COM object, I get "Unhandled exception at 0x00000000 in FortranProg01.exe: 0xC0000005: Access violation." I realize that this error can mean almost anything, but has anyone got some suggestions of common problems with COM that produce this problem? Here are some more details. My program code: program FortranProg01 use myolepg implicit none integer*4 comInitStatus integer:: comCreateStatus INTEGER(INT_PTR_KIND()) $OBJECT INTEGER(4) funcResult REAL(8) pkgVersion call COMINITIALIZE(comInitStatus) print *, comInitStatus call COMCreateObjectByProgID('MyOlePg.MyOlePkg', $OBJECT, comCreateStatus) print *, comCreateStatus funcResult = IMyOlePkg_GetPackageVersion($OBJECT, pkgVersion) print *, funcResult call COMUNINITIALIZE() end program FortranProg01 The wizard-generated interface code: INTERFACE !property PackageVersion INTEGER(4) FUNCTION IMyOlePkg_GetPackageVersion($OBJECT, pVal) INTEGER(INT_PTR_KIND()), INTENT(IN) :: $OBJECT ! Object Pointer !DEC$ ATTRIBUTES VALUE :: $OBJECT REAL(8), INTENT(OUT) :: pVal !DEC$ ATTRIBUTES REFERENCE :: pVal !DEC$ ATTRIBUTES STDCALL :: IMyOlePkg_GetPackageVersion END FUNCTION IMyOlePkg_GetPackageVersion END INTERFACE Any help would be much appreciated! Thanks! Brad.

  Read the article

• Regular wireless dropouts on new lenovo T440s in Ubuntu 14.04

  - by user290670

  Over the last 24 hours my wireless has dropped out regularly. I've tested to make sure it isn't my router (my phone and everyone in the house isn't having problems using the wifi). This is a brand-new installation of Ubuntu 14.04 and according to uname I'm running kernel 3.13.0-24-generic. Now, my laptop has an Intel 7260AC dual band wireless card and I've read that Ubuntu has been having trouble with these. I notice that at http://www.intel.com/support/wireless/wlan/sb/CS-034398.htm There are some updated drivers for my kernel version. However I have no idea how to update the kernel to use these drivers instead so that I can see if this will fix it. Can anyone help? These dropouts are really annoying. EDIT: Upgrading to 3.14.6 did not help.

  Read the article

• Dual monitor setup with Intel graphics and Nvidia Geforce GT 425M on 12.04

  - by fo_x86

  I have a Dell XPS L401x and just installed 12.04. I have a mini-display and an HDMI output, and I could hook up two Dell UltraSharp monitors to each port on Windows 7, and get a triple monitor setup. Doing a bit of research, it seems like the mini-display is wired to the integrated graphics card whereas HDMI is hooked up to Nvidia graphics card. I've also installed Bumblebee as it seemed like that was the proper way of installing Nvidia drivers on Ubuntu. At the moment none of my monitors is being recognized by Ubuntu. Is it even possible to have a triple monitor (laptop display + 2 external) setup? Has anyone successfully done this?

  Read the article

• Intel Dangles Cash to Lure Developers to Its App Store

  The tech giant will pay up to $25K for mobile applications contributed to the AppUp Center.

  Read the article

• x86 Server Processors Help Deliver Solid Earnings for Intel

  The chip giant might do a little better than expected thanks to its new x86 server processors, but there will be no big surprises. After 2009, that's a good thing.

  Read the article

• Mobilizing Open Source: Intel, Nokia Dish on MeeGo's Progress

  The two hardware giants detail how their new mobile effort relies on the wider open source community -- but don't expect an entirely open source final product.

  Read the article

• Attach Keyboard/Mouse to X Display in Dell XPS L502x Dual Video Cards (Intel/Nvidia HDMI)

  - by lcoronelp

  The idea: Use a second monitor in Dell XPS L502x with HDMI port in Ubuntu 12.04 The process: I connect the HDMI cable to monitor. I read this and I have video in HDMI monitor with Bumblebee and this commands: optirun nvidia-settings -c :8 DISPLAY=:8.0 firefox I have created a second keyboard/mouse master group with xinput with this solution. The problem: The second monitor (Display 8) doesn't recognize the keyboard/mouse and I cant use it. The question: Do you know some command to attach the keyboard/mouse master group to Display 8? I think that xinput -set-cs may work but it does not.

  Read the article

• Intel fields six-core embedded CPUs

  <b>LinuxDevices:</b> "The Xeon Processor 5600 series also includes the chipmaker's first six-core embedded processors, plus a dual-core processor for "micro servers" that has a TDP of only 30 Watts, the company says."

  Read the article

• Apple Passing on Intel's Next Mobile Chips?

  Reports suggest the MacBook maker is asking for a custom design instead. But that might prove complicated.

  Read the article

• Intel Exceeds Q1 Projections on Mobile Strength

  That raft of new mobile processors in January sure paid off as the chip giant blows past all projections for a tremendous first quarter, signaling renewed growth for the IT sector at large.

  Read the article

• 'Rising Tide' for x86 Servers Lifting Intel, AMD

  A report from Broadpoint makes the argument that both CPU makers will do better than expected because x86 server sales are poised to take off. No doubt IBM, HP and Dell are hoping that's the case.

  Read the article

• poor font rendering in browsers on 12.04

  - by Alecs

  I'm using a Lenovo B570e. I've installed the mesa-utils for the graphic driver because it wasn't recognized by default. Now I have this: graphic card : Intel® Sandybridge Mobile x86/MMX/SSE2. I don't know if it's just my impression but I think all the images are a little bit pixelated and I think it have something to do with the drivers. Maybe is not the correct driver associated with it, I'm saying this because when I was on Windows 7 the name of the driver was something like " Intel hd graphics..." Any suggestions? Thank you! Later edit: This seems to happen only in browsers.

  Read the article

• adjust the brightness in 13.04

  - by dinesh2707

  I have a dual graphics card: intel 4000 and nvidia 630m... I installed bumblebee and intel drivers from their website. I thought the brightness problem will be solved by installing these drivers. But, brightness works only for two steps: that is, dim, medium, high... But, it doesn't increase step wise. Can you please help me sort this problem? I'm a newbie to ubuntu and this is my first trial. So, please give me a detailed guide... Thank you :) EDIT: My model is HP DV6 7040tx. My Laptop Model

  Read the article

• Sudden "No Signal" in HDMI-DVI connection

  - by nazikus

  Yesterday I have connected external display Asus VW192C to my laptop Dell XPS 14-L421X via HDMI-to-DVI-D cable. And it worked perfectly fine from start. The day after, Asus screen went blank showing "No signal". Every time I connection/disconnection cable or power off/on the display it says "No signal". And I didn't change any system configurations meanwhile. To troubleshoot the problem, I have tried to connect laptop to TV (hdmi-to-hdmi) - it was fine. I've tried to connect a different laptop to the display via the same cable - worked fine as well. So its obviously something on system level, either Windows or graphics drivers. Also it seems that Windows still see the external display (I can move mouse pointer away from the main screen in Extended mode), but there's just no signal. Any ideas? What else to try? PS. My laptop has 2 graphics cards - GeForce 630M and Intel HD 4000 using NVidia Optimus technology. I have updated to latest Intel and NVidia drivers, still didn't help. PPS. Although I shouldn't have updated (from Intel support): "our Intel generic graphics drivers from the Intel website do not support using both Intel Graphics 4000 and NVidia GeForece GT630M". Nevertheless, it should not affect connectivity to additional display.

  Read the article

• NVIDIA 550M Drivers

  - by DOOM

  First to say, I am newbie, to the linux world and in situation where i have to get used to using ubuntu. My system is: i7-2630QM 8GB Ram with 750GB HD + NVIDIa 550M (1GB) Since i was facing problems with wubi - "slow Ubuntu", i installed it on a separate partition, of 80GB (10GB Swap, 40GB HOME, 30GB ROOT). The system was running fine, before I started using some "CFD" (Graphics Dependent) application. I needed to use "paraview" a graphics software, to design some engineering stuff. Following the installation problems, i installed something called "messa" on my system. The software works but, now my system is "dead-slow". Even with the computer at an idle state, the laptop, is pretty slow, and with huge annoying fan noise. I was tried running some similar applications with windows, and it turns out that its not a hardware, but has to do with the GPU drivers. Following some forums, I installed the "nvidia-current" and now everything is the same. I know, there are many solutions on this forum for nvidia-driver updates, but as you see, nothings working my way. Please someone, tell me what is that I am doing wrong :( This is the output from my terminal for the command lspci | grep 'intel' 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)

  Read the article

• How do I link against Intel TBB on Mac OS X with GCC?

  - by SilverSun

  I can't for the life of me figure out how to compile and link against the Intel TBB library on my Mac. I've run the commercial installer and the tbbvars.sh script but I can't figure this out. I have a feeling it is something really obvious and it's just been a bit too long since I've done this kind of thing. tbb_test.cpp #include <tbb/concurrent_queue.h> int main() { tbb::concurrent_queue<int> q; } g++ tbb_test.cpp -I /Library/Frameworks/TBB.framework/Headers -ltbb ...can't find the symbols. Cheers!

  Read the article

• Step-by-step execution for Intel AT&T assembler?

  - by Søren Haagerup

  Hello everyone, I'm writing a compiler that converts source code (written in a small imperative programming language) to Intel AT&T 32-bit assembler. I tend to spend a lot of time debugging, because of nasty offset-mistakes etc. in the generated code, and I would like to know if anyone knows of a tool to "walk through" the generated assembler code step-by-step, visualizing what's on the stack etc. I use Ubuntu Linux as my development platform, and I'm comfortable with the terminal -- a GUI-program would be nice though. Does it exist? Or is there a good reason it doesn't (maybe the problem isn't so straightforward..?) If you have good ideas for approaching debugging tasks in assembly code, I'll be glad to hear from you!

  Read the article

• Intel Matrix Storage Manager on Windows 2008 R2

  - by Shaharyar

  Hello Everybody, I am currently setting up a Windows Server 2008 R2 with Intel RAID. Is there a version of Intel Matrix Storage Manager that runs on Windows Server 2008 R2? All help is more than appreciated!

  Read the article

• PCI-express - is there a typo in the Intel 5500 overview

  - by Martin

  The overview for the 5500 and 5520 chipsets state that there is a total bandwidth of up to 48GB/s on each PCI Express x8 interface. http://www.intel.com/products/server/chipsets/5500-5520/5500-5520-overview.htm My understanding (admittedly from wikipedia) is that PCI-e Gen 2 runs at 500MB/s per lane. The 5520 has 36 lanes, and so would be limited to a total of 18GB/s. Am I missing something here, or is Intel's claimed 48GB/s a typo that should say 18GB/s ?

  Read the article

• Question about Installing an Intel E5300 CPU.

  - by jeff

  Can I re-use my heatsink/fan that is currently on the motherboard with this new Intel e5300 CPU ? I know both CPUs are socket 775 based CPUs. I have a 2.4 GZ single core Intel chip currently. Also would I be able salvage the thermal paste or should I just buy new paste?

  Read the article

• Which Processor should I buy: Intel Quad Core 2.5Ghz or Intel Core 2 Duo 2.9 Ghz?

  - by Kryten

  Hi, I am looking at buying a desktop and have narrowed down my choices to 2 machines with exactly the same specs, but different CPU's. Machine 1 CPU: Intel® Core™2 Quad Processor Q8300 (4M Cache, 2.50 GHz, 1333 MHz FSB) Machine 2 CPU: Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) I plan on using the PC for the following: Music Playing Software Development Virtual Machine Running Gaming "General Work" Which CPU would better suit the job?

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >