Search Results

Search found 9592 results on 384 pages for 'manager'.

Page 21/384 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • This update does not come from a source that supports changelogs

    - by blade19899
    When I get an update via update-manager for a software like blender/vlc, I like to see what has been fixed/changed. I added the ppa for blender/vlc (this only applies to the software I added a ppa for) sudo add-apt-repository ppa:cheleb/blender-svn sudo apt-get update sudo apt-get install blender And vlc like this. sudo add-apt-repository ppa:videolan/stable-daily sudo apt-get update sudo apt-get install vlc And when i run update-manager, or update manager pop-ups I see that vlc/blender have updates but, I can't see what has been changed/fixed this is the message I get, the screenshot below is for mupen but it's the same thing. (I updated vlc and blender, didn't wanna wait for the next update) This update does not come from a source that supports changelogs. (by the way I have a dutch Ubuntu, so the above text i Google translated it!) It only shows which version you have and to which version you be upgrading to. So my question is, how do I get the change-log tab of update-manager working. if it's even possible?

    Read the article

  • /etc/resolv.conf nameserver fd00::1

    - by user88631
    My /etc/resolv.conf constantly get a mysterious entry, i run a home network with ipv6 provided by ravd, the interface is auto-configured by Network manager (all name server lookups are lost when this line is first in my /etc/resolv.conf) . Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) **# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN** nameserver fd00::1 nameserver 192.168.1.1 search home.int When ping is working cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.1.1 search home.int So something is putting fd00::1 at start of file, not if I ping6 fd00::1 I get Destination unreachable: Administratively prohibited To diagnose this I ran the router with single cable to connected to ubuntu machine. Ran tcpdump + restarted network on ubuntu. "tcpdump ip6 -e -i eth0 | grep fd00" finds nothing, it's not being advertised via the network.. The only hit I got was when an upstream router refused a connection attempt from the ubuntu machine to fd00::1. I have also switched on debug for network manager & it appears to set the mystery line.. 15:22:14 storage-pc NetworkManager[349]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. 15:22:14 storage-pc NetworkManager[349]: <warn> dnsmasq exited with error: Other problem (5) 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281528] [nm-dns-manager.c:598] update_dns(): updating resolv.conf 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281875] [nm-dns-manager.c:719] update_dns(): DNS: plugin dnsmasq ignored (caching disabled) 15:22:14 storage-pc NetworkManager[349]: <info> ((null)): writing resolv.conf to /sbin/resolvconf 15:22:14 storage-pc dbus[2184]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 15:22:14 storage-pc dnsmasq[2875]: reading /etc/resolv.conf 15:22:14 storage-pc dnsmasq[2875]: using nameserver 192.168.1.1#53 15:22:14 storage-pc dnsmasq[2875]: using nameserver fd00::1#53 Any suggestions on how to find out where this comes from?

    Read the article

  • 12.04 wired network doesn't work RTL8111/8168B

    - by laket
    its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

    Read the article

  • Is it possible to keep nm-applet running between invocations of WM startup?

    - by serverninja
    I am using nm-applet to interface with NetworkManager, running xmonad as a window manager. My X sessions (including nm-applet) are set up with a /usr/local/bin/xmonad.start script. My question is, how can I keep nm-applet running in the background as long as X is running, but not necessarily xmonad? As mentioned above, it is being started with xmonad (and dying with it when xmonad is restarted, etc). I am using gdm to manage my X sessions, and I'm running 10.10. Where's a good place to start nm-applet to suit my particular needs? I need to remove it from the control of xmonad, but don't know where to start it otherwise. Any help, tips, etc appreciated. Edit: problem seems to be with how I have integrated xmonad. I have the session script as a file in /usr/share/xsessions/xmonad.desktop with the following contents: [Desktop Entry] Encoding=UTF-8 Name=XMonad Comment=Lightweight tiling window manager Exec=/usr/local/bin/xmonad.start Icon=xmonad.png Type=XSession /usr/local/bin/xmonad.start contains the following: #!/bin/bash xrdb -merge ~/.Xresources xcompmgr -c & trayer --edge top --align right --SetDockType true --SetPartialStrut true --expand true --width 8 --heighttype pixel --height 18 --transparent true --alpha 0 --tint 0x000000 & gnome-settings-daemon & gnome-screensaver & if [ -x /usr/bin/nm-applet ] ; then nm-applet --sm-disable & fi /usr/bin/urxvtd -q -o -f & eval `ssh-agent` & if [ -x /usr/bin/gnome-power-manager ] ; then sleep 1 gnome-power-manager & fi /usr/bin/gnome-volume-control-applet & exec xmonad The question is how do I integrate xmonad, gdm, X, etc in such a manner to replicate the behavior I currently have except with nm-applet (and possibly other programs) running whether or not xmonad is?

    Read the article

  • Cisco Call Manager adding 7945's

    - by Will
    Hello we currently have a call manager settup (older we are working on upgrading it) but for now we are looking to add 7945 IP phones. We currently have 7960's all over the place, but we can't get these new anymore. Here is the info about our call manager ace.dll 5.2.5.0 CCM4.1(3) aced.dll CCM4.1(3) AdministrativeReportingTool.exe 4.1(0.45) 4.1(3)sr4d Apache Tomcat 4.1 CCM4.1(3) ASTIsapi.dll 3.3.2.0 4.1(3)sr4d AudioTranslator.exe 4.0.0.3 CCM4.1(3) Aupair.exe 4.1.3.10472 4.1(3)sr4d AupairChangeNotify.dll 4.1.0.11 CCM4.1(3) AuthFilt.dll 4.0.0.0 4.1(3)sr4d AVVIDCustomerDirectoryConfigurationPlugin.exe 4.1.0.17(0) CCM4.1(3) bootp.exe 2.0.2.2 CCM4.1(3) BulkAdministrationTool.exe 5.1(4c) 4.1(3)sr4d CallBackService.exe 3.3.2.3 4.1(3)sr4d ccm.exe 4.1.3.17472 4.1(3)sr4d CcmPerfMon.dll 4.1(3)sr4d CCNTEST.EXE CCM4.1(3) cdpintf.dll 4.0.0.0 CCM4.1(3) Cisco CallManager 4.1(3)sr4d 4.1(3)sr4d One of the admins recommenced downloading a device pack, which we did. However when we ran it on the call manager server it gave the error "unable to read script" Any recommendations on how to get these phones working with our Call Manager? Thank you.

    Read the article

  • How to control manager class in Blackberry

    - by Keng
    Dear All, I have a problem when creating a UI on Blackberry. First, i try to create a ChatLayoutManager class extended from Manager class. My layout has three component: topfield, mainfield and bottom field. public class ChatLayoutManager extends Manager { private Field bottomField; private Field mainField; private Field titleField; public ChatLayoutManager(long style) { super(style); } protected void sublayout(int width, int height) { setExtent(width, height); int y = 0; if (bottomField != null) { layoutChild(bottomField, width, height); // This goes at the bottom of the screen setPositionChild(bottomField, 0, height-bottomField.getHeight()); height -= bottomField.getHeight(); } if (titleField != null) { layoutChild(titleField, width, height); // This goes at the top of the screen setPositionChild(titleField, 0, 0); height -= titleField.getHeight(); y += titleField.getHeight(); } if (mainField != null) { layoutChild(mainField, width, height); // This goes just below the title field (if any) setPositionChild(mainField, 0, y); } } public void setMainField(Field f) { mainField = f; add(f); } public void setBottomField(Field f) { bottomField = f; add(f); } public void setTitleField(Field f) { titleField = f; add(f); } Then i create another field (ChatField) extended from manager to add to mainfield in the ChatLayoutManager class which i have created above. public class ChatField extends Manager{ private Field _contentField[]; protected ChatField(){ super(Manager.HORIZONTAL_SCROLL | Manager.VERTICAL_SCROLL); } // TODO Auto-generated constructor stub} protected synchronized void sublayout(int width, int height) { // TODO Auto-generated method stub setExtent(width, height); int x = 0; int y = 0; if(_contentField.length > 0){ for(int i = 0 ;i<_contentField.length; i++){ //if(getManager() == this){ this.layoutChild(_contentField[i], _contentField[i].getWidth(), _contentField[i].getHeight()); this.setPositionChild(_contentField[i], x, y); if(_contentField[i++]!= null){ if ((_contentField[i].getWidth() + _contentField[i].getWidth()) >= width){ x = 0; y += _contentField[i].getHeight(); } else{ x += _contentField[i].getWidth(); } } //} } } } public void setContentField(Field field[]){ _contentField = field; } } And now, when i create some fields(such as TextField, BitmapField ...) added to ChatField, the program has an error "Field is not a child of this manager". The reason is when the framework invokes the sublayout function of the ChatField class , when sublayout starts calling layoutChild function the manager of field is not ChatField but ChatlayoutManager. I've experience hard time trying to resolve this problem, still I have no solution. Anybody can give me some suggestions? I really appreciate.

    Read the article

  • Adding A Custom Dropdown in RCDC for Forefront Identity Manager 2010

    - by Daniel Lackey
    My latest exploration has been FIM 2010 for Identity Management. The following is a post of how to add a custom dropdown for the FIM Portal. I have decided to document this as I cannot find documentation on how to do this anywhere else. I hope that it finds useful to others.   For starters, this was to me not an easy task to figure out. I really would like to know why it is so cumbersome to do something that seems like a lot of people would need to do, but that’s for another day J   The dropdown I wanted to add was for ‘Account Status’ which would display if the account is ‘Enabled’ or ‘Disabled’ in the data source Active Directory. This option would also allow helpdesk users or admins to administer the userAccountControl attribute in AD from the FIM Portal interface.   The first thing I had to do was create the attribute itself. This is done by going to Administration à Schema Management from the FIM 2010 portal. Once here, you click on All Attributes. What is listed here are all attributes and their associated Resource Types in FIM. To create the ‘AccountStatus’ attribute, click on New. As shown below, enter ‘AccountStatus’ with no spaces for the System Name and ‘Account Status’ for the Display Name. The Data Type is going to be ‘Indexed String’. Click Next.           Leave everything on the Localization tab default and click Next.   On the Validation tab as shown below, we will enter the regex expression ^(Enabled|Disabled)?$ with our two desired string values ‘Enabled’ and ‘Disabled’. Click on Finish and then and Submit to complete adding the attribute.       The next step involves associating the attribute with a resource type. This is called ‘Binding’ the attribute. From the Schema Management page, click on All Bindings. From the page that comes up, click on New. As shown below, enter ‘User’ for the Resource Type and ‘Account Status’ for the Attribute Type. This is essentially binding the Account Status attribute to the ‘User’ Resource Type. Click Next.    On the ‘Attribute Override’ tab, type in ‘Account Status’ for the Display Name field. Click Next.   On the ‘Localization’ tab, click Next.   On the ‘Validation’ tab, enter the regex expression ^(Enabled|Disabled)?$ we entered previously for the attribute. Click Finish and then Submit to complete.   Now that the Attribute and the Binding are complete, you have to give users permission to see the attribute on the User Edit page. Go to Administration à Management Policy Rules. Look for the rule named Administration: Administrators can read and update Users and click on it. Once it opens, click on the ‘Target Resources’ tab and look at the section named Resource Attributes. Type in at the end the ‘Account Status’ attribute and check it with the validator. Once done click on OK to save the changes.         Lastly, we need to add the actual dropdown control to the RCDC (Resource Control Display Configuration) for User Editing. Go to Administration à Resource Control Display Configuration. From here navigate until you find the RCDC named Configuration for User Editing RCDC and click on it. The following is what you will see:       First step is to export the Configuration Data file. Click on the Export configuration link and save the file to your desktop of other folder.   Find the file you just exported and open the file in your XML editor of choice. I use notepad but anything will work. Since we are adding a dropdown control, first find another control in the existing file that is already a dropdown in FIM. I used EmployeeType as my example. Copy the control from the beginning tag named <my:Control… to the ending tag </my:Control>. Now take what you copied and paste it in whatever location you desire within the form between two other controls. I chose to place the ‘Account Status’ field after the ‘Account Name’ field. After you paste the control you will need to modify so it looks like this:       Notice where you specify what attribute you are dealing with where it has AccountStatus in the XML. Once you are complete with modifying this, save the file and make sure it is a .xml file.   Now go back to the Configuration for User Editing screen and look at the section named ‘Configuration Data’. Click the ‘Browse’ button and find the XML file you just modified and choose it. Click OK on the bottom of the window and you are done!   Now when you click on a user’s name in the FIM Portal, you should see the newly added dropdown box as below:       Later I will post more about this drop down, specifically on how to automate actually ‘Disabling’ the account in the data source through the FIM Workflows and MAs.   <my:Control my:Name="AccountStatus" my:TypeName="UocDropDownList" my:Caption="{Binding Source=schema, Path=AccountStatus.DisplayName}" my:Description="{Binding Source=schema, Path=AccountStatus.Description}" my:RightsLevel="{Binding Source=rights, Path=AccountStatus}"> <my:Properties> <my:Property my:Name="ValuePath" my:Value="Value"/> <my:Property my:Name="CaptionPath" my:Value="Caption"/> <my:Property my:Name="HintPath" my:Value="Hint"/> <my:Property my:Name="ItemSource" my:Value="{Binding Source=schema, Path=AccountStatus.LocalizedAllowedValues}"/> <my:Property my:Name="SelectedValue" my:Value="{Binding Source=object, Path=AccountStatus, Mode=TwoWay}"/> </my:Properties> </my:Control>

    Read the article

  • Visual Studio 2010 Extension Manager (and the new VS 2010 PowerCommands Extension)

    This is the twenty-third in a series of blog posts Im doing on the VS 2010 and .NET 4 release. Todays blog post covers some of the extensibility improvements made in VS 2010 as well as a cool new "PowerCommands for Visual Studio 2010 extension that Microsoft just released (and which can be downloaded and used for free). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Extensibility in VS 2010 VS 2010...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Not able to find IIS Manager and enable IIS in Windows7 Home Basic

    - by Akshay
    I enabled IIS services in the add/remove windows components. However, when i want to open the manager, the IIS Manager does not appear under the administrative tools on the control panel. If i type the shortcut "inetmgr" into the run block it doesn't find it. However, i know the service installed correctly. It is a very frustrating problem since everyone says find it here or here but no one gives any help on what to do if is doesn't appear in the said locations at all. Can anyone please help me? The system i am using is Windows 7 home basic. The service installed correctly but i cannot find the IIS Manager.

    Read the article

  • Making sense of the Game State manager tutorial?

    - by Johnny Quest
    I have come across the Game State Managemnet tutorial at http://create.msdn.com/en-US/education/catalog/sample/game_state_management because I thought this would be a good place to start a game off. I have added a new screen, but I am still a bit lost on how everything works. When I make my game, do I only need one more additional screen? just for gameplay? or should I have a different screen for each level?

    Read the article

  • You Don’t Need to Install a Task Manager: How to Manage Running Apps on Android

    - by Chris Hoffman
    Google Play is full of task managers for Android. These utilities can show you apps running in the background, kill running apps, and otherwise manage your apps — but you don’t need to install any third-party software to do this. We’ll show you how to quickly and easily kill and manage your running apps using only the software included with your Android phone. Third-party task managers are unnecessary and many include harmful features, like task killers.    

    Read the article

  • ubuntu wont boot,, frozen at boot manager

    - by user93417
    im running ubuntu desktop 12.04, and well, i have no idea what happened. my computer lost power and died, and when i plugged it in and powered back on it took me to the sign in page and froze. i turned the computer off again and powered back on, this time hitting f2 and going to boot options, and the boot options page is frozen. ive powered up and down and tried a few times, all i get is a frozen boot options screen any ideas?

    Read the article

  • Can't replace MDM Display Manager with LightDM!

    - by Naveen
    Well, I installed MDM, and found it's buggy with my VGA hardware due to the following screen after rebooting: This screen repeats, even if I choose Yes or No As I have access to the console (by pressing ALT+F2) I tried, sudo dpkg-reconfigure lightdm which gave me the following screen, Even if I choose LightDM nothing happens at the next reboot. The first screen comes back! dpkg -l | grep -i mdm command results me following, ii mdm___________1.0.4-0~webupd8~precise_____Gnome Display Mnager ii mint-mdm-themes__1.0.5-0~webupd8~precise1_____Linux Mint MDM Themes (underscores are spaces) Please help... I need LightDM login screen back! Thanks!

    Read the article

  • EPM 11.1.2 - R&A DATABASE CONNECTIONS DISAPPEAR FROM THE "DATABASE CONNECTION MANAGER

    - by Powder
    When accessing the database connection panel through Reporting and Analysis all previously entered database connection do not appear. This is due to a bug in the Windows SMB2 protocol. To work around this bug you have to disable the protocol. On Windows 2008 the protocol is automatically enabled. This needs to be done on both the servers and the clients. Note that “server” is the server which hosts RAF repository service and RM1 folder, “client” – server which hosts replicated Repository service that accesses repository files via network i.e. \\<server_host>\RM1  In order to disable SMB 2.0 on the server side, follow these steps:  1. Run "regedit" on Windows Server 2008 based computer.  2. Expand and locate the sub tree as follows.  HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters  3. Add a new REG_DWORD key with the name of "Smb2" (without quotation mark)  Value name: Smb2  Value type: REG_DWORD  0 = disabled  1 = enabled 4. Set the value to 0 to disable SMB 2.0, or set it to 1 to re-enable SMB 2.0.  5. Reboot the server.  To disable SMB 2.0 for Windows Vista or Windows Server 2008 systems that are the “client” systems run the following commands:  sc config lanmanworkstation depend= bowser/mrxsmb10/nsi  sc config mrxsmb20 start= disabled  Note there's an extra " " (space) after the "=" sign.  To enable back SMB 2.0 for Windows Vista or Windows Server 2008 systems that  are the “client” systems run the following commands: sc config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi  sc config mrxsmb20 start= auto  Again, note there's an extra " " (space) after the "=" sign. 

    Read the article

  • Hosted CRM Solutions from a Manager?s Perspective

    CRM, Customer Relationship Management is a method or process that is used to know the customer?s behavior and their needs and it helps in developing a stronger relation with them. This is only a defi... [Author: James Wong - Computers and Internet - April 29, 2010]

    Read the article

  • Content, MetaData and Taxonomy 1 Taxonomy Manager

    This article is cross-posted from my personal blog. In DotNetNuke version 5.3, we introduced the concept of a centralized Content store, together with the ability to apply Taxonomies (categories) to the content. We have extended this in DNN 5.4 by completing the MetaData API as well as adding Folksonomy (user tags). In this series of blogs I will explain how developers can take advantage of these new features in their own extensions. But first lets take a look at how the pieces work together....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Update Manager Not working Fail to Download Repository Information

    - by user51564
    When I try to update, I get this error: Failed to Download your repository information Check your internet connection W:GPG error: http ://ppa.launchpad.net oneiric Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 4874D3686E80C6B7, W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/oneiric/main/source/Sources 404 Not Found W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found E:Some index files failed to download. They have been ignored, or old ones used instead.

    Read the article

  • Static site generator with web-based file manager?

    - by user234
    I'm checking around options of static web site generators which led me to lots of articles about them! However, no word is spoken on how to edit files through a browser; it's always assumed you have either DropBox or some FTPish or terminal access. The only generator I could find that includes a browser based admin screen is Kirby (getkirby.com, mentioned at modernstatic.com) Besides the application above, what setup would you recommend to have both static HTML generation and web-based file management? Thanks!

    Read the article

  • Update manager problem

    - by Alberto Favero
    I am trying to update to the LTS 12.04 and got the message: E:MMap dinâmico necessita de mais memória. Por favor aumente o tamanho de APT::Cache-Limit. Valor atual: 25165824. (man 5 apt.conf), E:Um erro ocorreu processando libmail-sender-perl (NovaVersão1), E:Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_universe_binary-i386_Packages, E:As listas de pacotes ou os arquivos de estado não puderam ser analisados ou abertos All updates are stuck now... What I must to do to solve this and upgrade to the 12.04 LTS? Thanks, Alberto

    Read the article

  • How to make unity unresponsive in Unity session in precise?

    - by Anwar Shah
    Recently I wanted to test the a keyboard shortcut, which is supposed to kill X server (hence very useful when you have a crash). That shortcut is not dependent on any particular window manager (like lxde, unity, kwin etc). So, it must work, even when you have unresponsive window manager (as opposed to Alt+Ctrl+Backspace which kills the session, and bring you a login screen). That's why I interested to make my WM (unity) unresponsive. Is past, it was very easy. Opening a terminal, typing unity --replace and then force close the terminal, was the simplest procedure. But unfortunately, This is not true in Ubuntu 12.04, (they make it very robust) Because whenever I kill the terminal, Unity automagically restart itself. I also tried compiz --replace but wasn't successful. My question is: How can I make Unity unresponsive while I am in Unity session, so that window manager does not recognize any keyboard shortcut.

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >