Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 21/62 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Cables for building a computer

    - by Faken
    I'm looking at building a computer and I have already done a whole bunch of research the topic and I think I know what I'm doing. My question is where do all the cables required for connecting everything come from? I'm pretty sure that the cables required come from their respective components (power connectors from the power supply, assorted cables from the motherboard, ect). However nowhere have I seen it explicitly stated that the cables come with the component I am buying. Just to confirm, if I buy all the components needed for a basic computer (CPU, motherboard, power supply, case, ram, video card, hard drive) from a website, say newegg, will I have all the screws, cables,connectors, and components to put together a working computer or will I need to buy some cables somewhere?

    Read the article

  • CentOS connect to the internet

    - by Delirium tremens
    I installed CentOS, but it didn't automatically connect to the internet. Is that the normal behavior? I have Ethernet Broadband Router DI-604 and WebStar DPX2203 series Cablemodem with EMTA . What should I do to connect to the internet? Update: A cousin told me my ethernet adapter or network board will depend on my motherboard. My computer upgrade document says the motherboard is gigabyte video onboard. I heard gigabyte's network adapters are Gigabit or Realtek. In CentOS, System - Administration - Network - New - Ethernet, first, only "Other Network Board" was listed, so I selected it and clicked Next, then there wasn't Gigabit, but there was Realtek, so I selected Realtek. I heard with Net Virtua selecting dhcp the things first answered asked me to tell first answerer are automatically configured. So I tried Realtek with dhcp, but it still didn't work.

    Read the article

  • HP Server bios boot delay

    - by jjrab
    I'm just going to throw this out there in case anyone else has run accross this... I have an HP DL320 G5p that had the motherboard replaced due to a faulty NIC port. After several calls to HP, two motherboard replacements, PCI riser card replacements, Processor replacement, and power supply replacement, the server takes approx. 10 minutes before it boots into the BIOS. It then boots up with no issues. We've run the HP smart start cd and performed the system tests and everything passed. All firmware has also been upgraded to the latest as well. Has anyone else seen this and found a fix? I am still working with HP, but there seems to be a struggle on their part to figure this out, so I'm curious to know if anyone else has experienced this and found a fix - thanks...

    Read the article

  • Xenserver boot error

    - by Adrian
    I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

    Read the article

  • In terms of performance, which processor is more suitable?

    - by Roberts
    My computer specs: Motherboard: Gigabyte GA-945PL-S3 OS: Microsoft Windows 7 Ultimate CPU Socket: LGA775 CPU: Intel® Core™2 Duo Processor E4300 (2M Cache, 1.80 GHz, 800 MHz FSB) After I bought new hard drive (Western Digital 250GB, 7200rpm, 32MB, Sata III, Caviar Blue, WD2500AAKX) I saw that my processor temperature started to raise to higher value then before. Now while surfing internet it goes to 70°C. Cleaned my motherboard - nothing; cleaned fan - nothing; replaced thermal paste - nothing; replaced thermal paste with care - still nothing. So I went to friend just to check if he doesn't have any spear fan, and he did. But with fan he had another processor that he didn't need and he wanted to give it to me, but I told him that I will think about this. So my CPU, he's CPU (Intel® Pentium® D Processor 820 (2M Cache, 2.80 GHz, 800 MHz FSB)). Question: which proccesor is better for gaming and for recording games?

    Read the article

  • No HDMI audio - Windows 8 - ASUS H81M-PLUS

    - by Paul Wright
    I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

    Read the article

  • Software/FakeRAID: Windows 8 Disk Mirroring vs Intel Onboard

    - by Johnny W
    So Windows 8 is out and I have a new motherboard. I wish to create a RAID 1 coupling between two HDDs -- for storage purposes only (my OS is on an SSD) -- but I don't know which is the best route to take. My motherboard (Z77 chipset) comes with the age old Intel Fake RAID, but since I only wish to use my RAID for storage, I wondered if I might be better to use Windows 8 Disk Mirroring. Can anyone advise which is better? Or perhaps the pros and cons of each, if that's too contentious? I just can't see the benefit of FakeRAID. You can see my current setup here, if that might change things(?): Thanks!

    Read the article

  • Viewing and deleting partitions using the BIOS?

    - by cluelesscoder
    I have an M4A785TD-M EVO Asus motherboard which uses Asus Express Gate for its motherboard (says American Megatrends, Inc at the bottom). I activate it by pressing Del; also says Tab activates BIOS Post but that doesn't seem to do anything. I went into this expecting to see a breakdown of the partitions. I have a 300GB hard-drive separated into 3 partitions. While it does show SATA for my main hard-drive and my disk drive, it doesn't show the partitions. Is this typical? Do I have to us an OS-based tool to delete the partitions or can I delete using my BIOS? I tried updating the BIOS through Asus's Update utility but it appears to be broken (connects/disconnects repeatedly). I used HWiNFO32 to get some information: BIOS Date: 06/30/10 BIOS Version: 2103 EFI BIOS: Not Capable Tried to update but it directs me to biosagentsplus.com which wants $30 for the download (another question would be how to avoid them).

    Read the article

  • Power Supply Not Working?

    - by Mr.Glass
    So I recently made some purchases for a new computer including: Motherboard: Gigabyte GA-EP45-UD3R CPU : Intel Core2Quad 2.66Ghz Power Supply: Antec Basiq 500w UPDATE: I got the Power Supply working, the motherboard's lights come on, the video card fan spins, BUT the CPU fan does NOT spin and there is no video. Whats the possibility of lacking power? In the mobo guide it says the use of a power supply providing a 2x4 12V connector is recommended (I do not have this connector) by the CPU manufacturer when using an Intel Extreme Edition (I'm using Core2Quad) UPDATE: Got it working, intstalling windows 7 now. THANKS GUYS!!

    Read the article

  • PC shut downs automatically after a second

    - by emzero
    I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware.

    Read the article

  • does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

    - by locuse
    i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

    Read the article

  • Certain drives in RAID 5 set intermittently are not recognized

    - by hydroparadise
    I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

    Read the article

  • Complete machine freezes...at a loss

    - by user28818
    Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

    Read the article

  • Time randomly changing itself, internet randomly dying

    - by Vee
    Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

    Read the article

  • Are all SATA cables compatible with SATA 3?

    - by Jim Fell
    I have a HP Compaq de5700 Small Form Factor desktop computer, and I am looking to upgrade it's hard drive. When I open up the box, it clearly has available SATA connectors on the motherboard, but no indication as to which SATA version (1, 2, or 3). The hard drive I am considering is a SATA 3. My concern is that if the motherboard also supports SATA 3 and I use an old SATA cable (v1 or v2), might there be problems? This is a bare drive, so I don't expect that a cable will come with it, and I have not been able to find the manual for this machine. Thanks.

    Read the article

  • 2 "P4" power connectors *AND* an 8 pin EPS connector -- all necessary?

    - by chris
    I recently bought an Arima SW350 motherboard. It supports 16 ddr simms as well as 2 opteron 2xx CPUs, so I imagine it may have pretty heavy power requirements... It has a 24 pin ATX power connector, 2 4 pin "P4" power connectors, and an 8 pin EPS power connector. My supermicro power supply has a 24 pin ATX connector and the EPS connector, and one P4 connector. Can I safely run this thing with only one P4 connector plugged in? Can I safely get a "hard disk to P4" adapter and use that to power the other P4 connector on the motherboard? Do I just need a new power supply? The board's documentation is pretty thin on the topic.

    Read the article

  • Is it possible to use a dual processor computer as your desktop?

    - by Ivo Flipse
    I've seen some people suggesting to get a motherboard that supports two processors and stick two Xeon Nehalem processors in it. Could you use this system as a desktop PC or is this useless or even impossible? It's more hypothetical question if Windows 7 would support such a set-up. I know you could just take an i7, but wouldn't two of those processors be a whole lot more awesome? Like the previous generation Skulltrails? The idea would be to have a motherboard like this ASUS Z8NA-D6C Dual LGA 1366 Intel 5500 ATX and two Xeons (since I don't think i7's could be used) Intel Xeon E5405 Harpertown to run something like Windows 7 Ultimate.

    Read the article

  • Second Monitor "Input Not Supported"

    - by Drew
    I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

    Read the article

  • How to switch easily between a 5.1 headset and 2.1 speakers ?

    - by Wookai
    I have a 5.1 headset that I mostly use for gaming and watching movies. It is connected using 3 jacks to the rear panel of my motherboard (plus one for the microphone). I also have some small 2.1 speakers that I sometimes use to listen to music or to share a video/movie with someone. For now, what I do is crawl under my desk, and switch the cables. As my motherboard has 7.1 capabilities, I am wondering if there could be a way of having all 4 jack cables always plugged in, and switching on which device to output the sound programmatically. Has anybody had a similar problem, and how did you solve it ?

    Read the article

  • How could all of my hard drives fail at once?

    - by Taylor
    I have an Ubuntu 13.04 server. Today I found the box had crashed. I restarted it, and now every single hard drive's partition table is missing. (1 SSD for /boot, /, and 3 2TB drives for RAID). I have the SSD connected to a laptop VIA USB-SATA cable, and sure enough, the partition table is missing. This tells me that the Motherboard / SATA controller / software actually broke the drives, not that they just can't be read correctly. Something similar happened to only the SSD a few months ago, and I was forced to just re-partition it. How the heck could his have happened? Bad Motherboard or SATA controller?

    Read the article

  • Viewsonic Monitor Resolution - Drivers are not working

    - by ravidev
    I have Viewsonic va1716w monitor which has VGA/D-SUB video input. I bought new Motherboard Intel DH67GD which has HDMI & DVI output. I connect my motherboard to monitor using DVI to VGA connector. It's working. Yesterday I installed windows 7 OS and also installed monitor drivers(downloaded from viewsonic site - signed version) When i set display resolution to 1440 x 900. It's not setting it.it sets back to 800x600. What should i do to make resolution to 1440x900 (monitor resolution)? DVI to VGA causing this problem or i need to do any trick? Any link to download drivers Please guide me.. Thanks in advance !!

    Read the article

  • Computer stopped working (ASUS P5GD1-VM)

    - by Gordonrjones
    My computer stopped working the other day. I came down and it was kind of chirping away. Then, when I restarted it, it only did the same thing. I unplugged everything not needed and it did nothing at all. I thought maybe the power supply wasn't working, but when I took the cover off the green light on the motherboard was on and the power supply is making a little buzzing sound. But nothing happens when I turn the computer on, other than the green light on the motherboard flickers a bit. I checked the memory in other computer and it works fine. I'd love to be able to fix this with as little cost as possible. Can someone here help? P4-640 (3.2E GHz, 800 FSB, L2:2MB, EM64T, HT)

    Read the article

  • Toshiba Satellite A305-S6861 Display Problems

    - by brock029
    Well this is the first Laptop I have ever worked on with a dedicated video card. So, there is no video going to the laptops monitor or to an external. Ripped it apart found the gpu and now am stuck. I cant decide if its the gpu that has gone out or the motherboard. Any one have any suggestions? If it were a desktop I would throw in one of my spare video cards. Mainly I don't want to order the video card and eat the $50 if its the motherboard.

    Read the article

  • Recovering data from a Silicon Image SiI3114 RAID

    - by Isaac Truett
    I have a set of 3 disks in RAID 5 originally created with a Silicon Image SiI3114 on-board RAID controller. The old motherboard is dead. The new motherboard (which has a different raid controller) won't boot from the array. I have no reason to believe that the drives are damaged or corrupted. I'm 99% sure that the problem is that the new controller isn't compatible or I'm not setting it up properly. Is it possible to recover data from the drives using a different controller? Would a PCI card like this one allow me to read from the array again?

    Read the article

  • Compatible case?

    - by Rick
    Hello everyone, first of all, I'm not sure where this question should go. So I've looked around and found the 'hardware' tag used in superuser.com please forgive me if I'm posting this on the wrong site. I'm new to the hardware part of computers. I've been looking around for a few months and now is the time to make my choice. I want to build my own computer and I think I got all the items I need. I want to know if the case and the motherboard I've chosen are compatible or if you could tell me how to check if they're compatible I want to know if they fit. Here's the motherboard/processor/memory package And this* is the case I'd like to fit it in. I'm sure that all the other stuff I might need I have with me already. Thanks in advance -Rick *See my comment, I may not post two hyperlinks due to spam protection

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >