Search Results

Search found 16499 results on 660 pages for 'off'.

Page 21/660 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• MB with CPU and power supply - can be turned on but not off [closed]

  - by COcodrilo

  Hi, Not sure whether this question belongs here, I hope so. I have just bought a motherboard and CPU. I have installed the CPU, cooler and connected to CPUFAN on the MB. I have plugged the power supply to MB and the cable from "ON" button to pins named "PWR" and the LEDs. However when I turn on the PC, both HDD and POWER leds are continously on and the PC cannot be turned out. What could I be missing?

  Read the article

• Windows powering off after login

  - by Jack

  As soon as I logon to Windows 7 64bit, the computer restarts. It isn't a hardware issue, as linux works fine. Windows 7 64 bit. Safe mode, last known good configuration etc, nothing makes any difference. Nor does startup repair or sfc. I used DaRT to check the event log, and nothing is recorded. How can I troubleshoot this?

  Read the article

• System time is off in Fedora

  - by NoClue

  I have a desktop PC with Fedora, Ubuntu and Windows installed and grub used for multibooting. But time in Fedora is always 5 hours behind. If I change the time in Fedora, then Windows and Ubuntu will be 5 hours ahead of the current time. I don't understand how to fix it. Any ideas? All the timezone settings in Fedora, Ubuntu and Windows are the same.

  Read the article

• "one-off" use of http_proxy in a Chef remote_file resource

  - by user169200

  I have a use case where most of my remote_file resources and yum resources download files directly from an internal server. However, there is a need to download one or two files with remote_file that is outside our firewall and which must go through a HTTP proxy. If I set the http_proxy setting in /etc/chef/client.rb, it adversely affects the recipe's ability to download yum and other files from internal resources. Is there a way to have a remote_file resource download a remote URL through a proxy without setting the http_proxy value in /etc/chef/client.rb? In my sample code, below, I'm downloading a redmine bundle from rubyforge.org, which requires my servers to go through a corporate proxy. I came up with a ruby_block before and after the remote_file resource that sets the http_proxy and "unsets" it. I'm looking for a cleaner way to do this. ruby_block "setenv-http_proxy" do block do Chef::Config.http_proxy = node['redmine']['http_proxy'] ENV['http_proxy'] = node['redmine']['http_proxy'] ENV['HTTP_PROXY'] = node['redmine']['http_proxy'] end action node['redmine']['rubyforge_use_proxy'] ? :create : :nothing notifies :create_if_missing, "remote_file[redmine-bundle.zip]", :immediately end remote_file "redmine-bundle.zip" do path "#{Dir.tmpdir}/redmine-#{attrs['version']}-bundle.zip" source attrs['download_url'] mode "0644" action :create_if_missing notifies :decompress, "zipp[redmine-bundle.zip]", :immediately notifies :create, "ruby_block[unsetenv-http_proxy]", :immediately end ruby_block "unsetenv-http_proxy" do block do Chef::Config.http_proxy = nil ENV['http_proxy'] = nil ENV['HTTP_PROXY'] = nil end action node['redmine']['rubyforge_use_proxy'] ? :create : :nothing end

  Read the article

• Off-the-shelf solutions for migrating data from azure blobstorage to rackspace cloud files

  - by S.C.

  I have large amounts of data (500+ GB) stored in azure blob storage that I need to transfer to rackspace cloud files. I know it is possible to perform such a migration using the SDKs from both services, but is there a free, standard, 1-step process for doing this? I've built a POC utility but would like to avoid having to optimize it to perform the transfer within a reasonable amount of time. Thanks.

  Read the article

• Netgear genie says my Internet is off, while Windows claims I am connected

  - by Manu

  I'm connected via wifi to my ISP's router/modem. While Windows says that I'm always connected, I keep getting messages from Netgear Genie that I've lost contact to the Internet, and I cannot access webpages until it comes back. There are two other computers in the house, one connected to the router via ethernet, the other via wifi, both seem to have no such problems. I've wondered if Netgear genie itself was the problem, but I am regularly disconnected even if I uninstall it. And I'd rather have it since it accurently tells me if I'm connected or not. Why does windows says I'm online if I can't access any online game, or website ? Is "netgear genie" the problem ? I've removed the connection, recreated it, I've even copied the settings to a usb key from the computer that has wifi access.

  Read the article

• How long does it take for a server to get 'off greylisting'

  - by Michael

  Hi all, I asked a question regarding email delays a few months ago, and I think I found a workaround. I changed our email from "[email protected]" to "[email protected]", and it seems to work instantly again. After reading some articles, I believe this could be due to some form of greylisting, though some servers might call it something else -- if a server like yahoo or gmail receive email from a server that it is not used to receiving email from, then sometimes the delay occurs. But a name such as yahoo, gmail, which requires a user to sign up manually -- this delay can be avoided. My question is this: does anyone know more about this issue -- especially since it would be nice to send an email from our own site, instead of needing to use a whitelisted server? Thanks!

  Read the article

• wifi connection turns off oll the time

  - by er-v

  Hello! I realy need help with one strange problem. I have a wifi network in my appartment with wireless N home router Trendnet tew-652BRP. Everething work fine for three of my laptops, but I have one PC with D-Link DWA-140 adapter. It looses connection 2-3 times in 5 minutes. There is following messages in my system log when it does so: The browser has forced an election on network \Device\NetBT_Tcpip_{9537A5C1-3B43-4C56-B94C-CE69A257C3AD} because a master browser was stopped. The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)] Comment: None The TCP/IP NetBIOS Helper service entered the stopped state. in order of appearence. How can I stop it? I have the latest driver installed.

  Read the article

• Quickbooks Error - Can't turn off auto updates

  - by Murtez

  My company uses quickbooks pro 2002 and unfortunately they won't upgrade at this time, the program keeps freezing and giving methe error: This action cannot be completed because this program is busy.. Then asks to switch or retry, I tracked it down to being an issue with IE since it's an old program and can't use the new versions of IE (the program uses IE for it's interface for some STUPID reason). Everyone says to disable auto updates but the problem is that I can't get to the options area to disable the updates (the options area uses IE!!!) so I'm screwed, I have to sit there and click retry 40-50 times several times a day and it's driving me nutz. I've been looking online for days but have not found a solution to this predicament. Is there a way to disable auto updates through the configuration files? Any help is greatly appreciated.

  Read the article

• Late Model 2011 Macbook Pro with SSD appears to be off somehow

  - by chris

  Ok, I just got a SSD for my Macbook Pro Late-2011. The specs from what I read are that the laptop is capable of 6gbps, so I got myself a OZC Agility 240gb 6gbps SSD. Decided to join the club and speed test it with Blackmagic Disk Speed Test.. and the results are equivilent to that of a 3gbps setup. So.. I am wondering overall is there a configuration setting somewhere I can tweak? The original HD was a 500gb HDD the spinning kind. So I'm figuring maybe thats why there may be a setting somewhere hidden I dunno about that I can tweak, just wanna see if anyone else knows if this is the case. edit should also mention did a fresh factory install, nothing carried over from original hd

  Read the article

• Raid5 is off on my Lefthand P4500

  - by Soeren

  I have 1 cluster with serveral p4500. There is HW Raid5 and the Raid5 is split on: first 6 is one raid 5, and the other 6 is one raid 5. There were two disk that came up with a fault. I replaced both disk in same Raid5. Now the storagesystem says that Volumes is unaccessable and the Raid5 of the P4500 is down. How can I get the lefthand up and working again? Ive tried to put the old disk in the P4500 again, but this does not help. I also tryed to restart the disk shelf as well. Do you have any idea? Or something to get it to work again?

  Read the article

• emacs AucTeX:Turn off auto-fill-mode inside a particular LaTeX environment

  - by Seamus

  I like using auto-fill-mode for hard line wrapping. However, when I'm making a big tabular in a .tex file, I like using align-current to have the table look somewhat like it would when printed. The difficulty is that if I have a table that is longer than the line width, auto-fill-mode breaks it, and then align-current can't put things to rights and gets confused. Is there a way to tell emacs that when I'm between the \begin and \end tags of a particular kind of environment (in this case, tabular), don't word wrap...

  Read the article

• Computer randomly shuts itself off

  - by Decency

  I have not been able to determine a pattern for why this happens, despite my best efforts. I've attempted to run it on full power with Prime95 and this doesn't trigger a restart. Generally the restarts occur while I'm playing games, watching videos, or even just having multiple tabs open in a browser. However, I often play processor intense games for hours without any restarts occurring, and sometimes they'll happen 3-4 times in an hour during less intense activity, so I don't think that is the problem. I imagine it has something to do with overheating or power consumption so I've been monitoring CPU temperature and cleaning with compressed air, but the problem keeps happening. I don't know how to track power consumption, and assume that this is the problem. Whenever this occurs, the sound gets stuck in a short loop of whatever was playing at the time, though restarts also occur when nothing is playing. Here is a screenshot of temperatures: and under load: Here's the parts list: http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=10546754 As shown in the list, the case includes a 585W Power Supply, which I've been told should be plenty. I built the computer myself with a friend's guidance but it's very possible I did something wrong. Right now I'm looking into ensuring that I have the latest drivers for all components. Any help would be appreciated- thanks.

  Read the article

• USB-keyboard & mouse powered off in windows-7

  - by sinned

  I have a problem with a pc where usb devices are not getting any power as soon as windows starts up (it works in preboot). This pc has no ps/2, so there is no chance for input, also not in secure boot mode. I "tidied up" using sysinternals autostart, so there is a chance I messed something up here, although I'm quite sure I only deleted some old printer drivers from autostart. I do not know how to reset this, I cant even log in because there is no input possible. I could use a linux live cd, but I don't know what to do there because there is no sysinternals from linux into a not running windows... To make things even worse, I have the windows installation completely encrypted with truecrypt, so I haven't even tried windows recovery cd yet. There is no loss of data since I can access the disc with a live-linux, I only want to use it again without resetting up everything. Any suggestions?

  Read the article

• Multiple copies off the same printer on Windows 7 from PrintUIEntry

  - by Kev

  I currently have a number of bat files which work perfectly fine on Windows XP which install the same printer multiple times with a number of finisher options set - e.g. after running the bat file below I would end up with four printers in the printer drop down called Sharp Kits Printer - A4 Single Sided Sharp Kits Printer - A4 Single Sided Stapled Sharp Kits Printer - A4 Duplex Stapled Sharp Kits Printer - A4 Duplex which all have there options configured in the relevant way. I have amended on Windows 7 to point to correct INF file and printer name in the INF files - a single printer installs fine. However when I run the complete batch file only the first printer in it is installed - occassionally the later ones flash up in the GUI but then vanish when you press F5 and are still missing after a reboot. SET QUEUENAME=http://192.168.7.123:631/printers/Sharp700 SET PPD=J:\DRIVERS\Printers\MX700-Win7-64\SJ1JWENG.INF SET PPDENTRYNAME=SHARP MX-M700U PPD J: cd "\DRIVERS\Printers\MX700-Win7-64" SET NICENAME="Sharp Kits Printer - A4 Single Sided" SET PREFS="J:\SCRIPTS\Printers-Win7-64bit\Sharp_SINGLE_SETTINGS.dat" %SYSTEMDRIVE%\WINDOWS\system32\rundll32.exe %SYSTEMDRIVE%\WINDOWS\system32\printui.dll,PrintUIEntry /w /b %NICENAME% /x /n "part of the n switch" /f "%PPD%" /if /r "%QUEUENAME%" /m "%PPDENTRYNAME%" rem restore settings go here... SET NICENAME="Sharp Kits Printer - A4 Duplex" SET PREFS="J:\SCRIPTS\Printers\Sharp_DUPLEX_SETTINGS.dat" %SYSTEMDRIVE%\WINDOWS\system32\rundll32.exe %SYSTEMDRIVE%\WINDOWS\system32\printui.dll,PrintUIEntry /w /b %NICENAME% /x /n "part of the n switch" /f "%PPD%" /if /r "%QUEUENAME%" /m "%PPDENTRYNAME%" rem restore settings go here... I have tried adding the "/u" paramater to the end, I have changed the "/n" paramater to be different (e.g. n1, n2,n3 etc) - both of these result in the same. I have also tried to change the port (/r) to have "_1" (etc) on the end like the GUI would but this errors as the port doesn't exist. Is it possible to do this on Windows 7, and if so how?

  Read the article

• Wiki: Irritating phrases you are subjected to in "the enterprise"

  - by username

  I am "deploying" a very silly question, but it could be amusing. What especially irritating "business" terminology are you subjected to at work? The one that annoys me most actually is "the enterprise" which apparently makes you sound more dangerous than just "enterprise"

  Read the article

• "Error 5: Access denied" when installing programs with UAC turned off

  - by Aero

  I'm having some trouble installing msysgit 1.7.3.1preview on Windows 7 Home Premium. I downloaded the setup file from the Google Code and then ran it. Upon running, I got the following error: I have tried downloading and running different older versions of msysgit with no luck. For the record, I have administrative privileges and there are no other user accounts on this Windows machine. Any help would be greatly appreciated. Thanks. UPDATE: I have managed to semi-fix this problem. I turned on User Account Control back to the default setting and and then ran the setup file as an administrator. I successfully managed to install Git. However, this means I have to keep UAC turned on whenever I want to install a new program (I realised that it persists over all programs; not just Git). So it's quite a nuisance. If anybody knows how I could keep UAC disabled whilst still being able to install programs without running their setup files as an administrator, I would be eternally grateful. UPDATE: I have changed the question title to better suit the new situation.

  Read the article

• Laptops on Windows Domain sometimes have problems accessing internet when off-site

  - by FSUScoot

  Hi all-- We've had this problem for a long time. When users travel, sometimes they can't get internet access from a wired or wireless connection. Here are a couple examples: 1) A user goes to a hotel and tries to access the wireless in their room. They can connect to the access point. They open a web browser and they can't get re-directed to the hotel's login page. Because they can't log in, there's no internet access. 2) A user goes to another laboratory/university and tries to access the wired network. They connect, link is fine, PC gets IP from DHCP but no internet access. There's no login page to be re-directed to. It should just "work". What I've found is that it's a DNS issue. Because the computer is on a Windows Domain, it seems it MUST use our DNS servers. Even if you connect to an outside network and do an ipconfig /all, it looks like everything is ok. It'll even show their DNS servers listed in the config. The computer just won't use the other network's DNS server. I found a reg key that keeps our DNS servers listed and it seems that they take priority every time: HKLM\SOFTWARE\Policies\Microsoft\Windows NT\DNSClient All the values under that key are for our AD domain. NameServer and Searchlist never change. What I've found is if the user edits the NameServer string and puts the DNS server of the network they're on, everything works just fine. They get re-directed to the hotel's correct login page or their internet access starts working. It's only a problem if the network they're on blocks outside DNS or a hotel that uses an internal name in their front page redirection that only their DNS server knows about, i.e., not public. If the re-direct page starts with an IP, like 10.10.10.10, it'll work just fine. Obviously this isn't a fix for everyone. Most of my users are pretty knowledgeable so it’s easy for me to walk them through or send them a .reg file that they can edit and run. This problem isn't limited to Windows 7. It was like this with XP as well. It's not hardware related. The problem exists on both wired and wireless, Intel or Broadcom, laptops or desktops. Anyone else have this problem? Is there a GPO I can change that I missed? Got a good work-around for this? Thanks for any help!

  Read the article

• How do you update without cutting off users?

  - by Griffin

  I searched around and I was surprised that I couldn't find an answer to this question. My assumption is that you have multiple servers. Normally they both will be doing their specific take (for the rest of this I will assume a simple website). Now lets say server A & B need updates. Do you update server A while server B keeps pushing out the webpage and then when server A is okay you update server B? This seems like it would work in small scale but seems horrible in large scale due to the fact that you'd need twice the power that you normally have. When dealing with a large number of servers do you update small sections at a time? I thought the problem with this would be if server A can't work alongside server B C D E or F any-longer that's not that bad. But when you start updating you slowly lose this small percentage. What is the proper way to deal with updates like this?

  Read the article

• Windows 7 F6 Drivers off a USB Drive

  - by altCognito

  I'm doing a fresh install of Windows 7 and I have an on board software RAID. I "need" to install the drivers via the infamous F6 process. Technically, it should be possible to do so after the OS has been booted, but long story short, this isn't going to work well for me. Is it possible to install F6 drivers during the installation using a USB, or must that always be done using floppies? What are my alternatives?

  Read the article

• Turn off write barriers on ext4 whiche FS is mounted

  - by user462982

  I am doing some IO intensive DB imports that run for several days now and the IO performance has dropped tremendously over times. The DB data files (log files) are on an ext4 formatted logical volume which is mounted with default options (did not specify something special in fstab). Since I just learned that ext4 enables write barriers by default: Q: Is there some way to disable write barriers online (i.e. while the file system is in use), because I cannot interrupt the import and don't want to restart it again. I am aware that write barriers might not be the only thing impeding performance it is a bad idea to have write barriers disabled on journalling file systems if data safty is important (e.g. on a production system)

  Read the article

• What is the fall off of subsecond throughput on Ethernet Network Interfaces

  - by Kyle Brandt

  On a network interface, speeds are given in term of data over time, in particular, they are bits per second. However, in the uber-fast world of computing -- a second is kind of a really long time. So for example, given a linear falloff. A 1 GBit per second interface would do 500MBit per half second, 250Mbit per quarter second etc. I imagine at certain units of time, this is no longer linear. Perhaps this is set by ethernet frequencies, system clock speeds, interrupt timers etc. I am sure this varies depending on the system -- but does anyone have more information or whitepapers on this? One of the main reasons I am curious is to understand output drops on interfaces. Even if the speed per second is much lower than the interface can handle -- perhaps there are spikes that cause drops for only small numbers of milliseconds. Perhaps various coalescing would hide this effect -- or perhaps increase it on the receiving interface? Do queues make a difference here? Example: So given if this is linear down to the MS we would have 1Mbit/MS, and if Wireshark isn't distorting what I see, should I see drops when I have a spike beyond 1Mbit?

  Read the article

• APC UPS-5000 Power off remote servers

  - by Vishal

  Hi there, I have a UPS connected via the serial port to a server using PowerChute Business Edition. If a power outage occurs I would like this server to start shutting down all other servers within the network. Is there dedicated software to do this? I was thinking of creating a command file which runs a .bat file to run shut down commands to each server (using PSExec). I can set PowerChute to run this command file when a power failure occurs. Is there not anything APC provide which has this functionality and is more efficient than writing a .bat file to do this? Thanks,

  Read the article

• Setting CPU cores off-limits to all threads not specified (preferably in Windows 7)

  - by Shinrai

  I have a really specific machine configuration in the works that would really be helped out if there were any way to do this...basically what I'm looking for is the opposite of setting CPU Affinity for a process. I want to be able to tell Windows "No applications except [x] are allowed on [these cores]." Is there any mechanism whatsoever for doing this? (Yes, I am aware of some of the potential issues this could cause and I normally would never fool with processor affinities, since the OS usually does a damned good job itself, but this is a pretty odd situation involving some software that is very CPU-bound constantly having to wait on interrupts and DPCs and things from other threads.)

  Read the article

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >