Search Results

Search found 5878 results on 236 pages for 'sim card'.

Page 210/236 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

  - by Bill

  I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

  Read the article

• How to record tv to network share with Windows Media Center?

  - by Peterdk

  Well, you would think that Windows 7's new MediaCenter would be up to the task of recording your TV to a network share/drive. Too bad, it looks like it's just not possible. I have a windows 2008 R2 server, and a Windows 7 machine with a TV card. Since my server has 2TB of storage, it would be nice to record directly to it's networked drive. (I mounted it as Z:). I tried the following: Selecting it in Media Center Itself: Not working. Not available. Editing the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Recording , setting RecordPath to Z:\TV. Not working. Editing the registry: setting RecordPath to \\server\TV. Not working. Creating a Symlink (mklink \D) to Z:\TV and \\server\TV and setting that in the registry as RecordPath. Currently I am out of options. I could ofcourse Install Windows7 on my server, but I have no license for that, and my windows 2008 r2 is free from dreamspark. Are there people that are succesfully recording to a networked drive/storage? edit I also need to mention that I need to be able to acces the stored files from other PC's, like my laptop. So iSCSI is great for recording, but it looks like you can't access iSCSI devices from multiple PC's. Looks like sharing a iSCSI device is out of the question, so: Are there workarounds to get this thing recording to my network drive?

  Read the article

• Why can't I connect to my router's config page with Windows 7?

  - by user17940

  I've got a Belkin wireless router, and just bought a new Dell computer with Windows 7 pre-installed. I can connect to the Internet and my home network just fine, but when I try to visit my router's configuration page at http://192.168.2.1, I get a "Connection was reset" error. Nothing I do will make the router's configuration page come up in my web browser. More background information: I could always get to the router's config page from my Windows XP machine. I never had any trouble prior to getting this Windows 7 computer. I can ping 192.168.2.1 successfully from my Windows 7 computer. My PC is connected to the router by a physical CAT5 cable, not via wireless. Every device connected to my router, including the new computer, can get to the Internet with no problem. Here are some things that did not solve the problem: I tried turning off IPV6 in Windows. I tried turning off my firewall and antivirus software I tried using https instead of http I tried disabling and then enabling the network connection in Windows I tried reverting my network card driver back to an older version I have tried both Firefox and Internet Explorer web browsers. Has anyone experienced something like this before, and solved it? Thanks a lot for your help!

  Read the article

• 5.1 Surround Channels are Jumbled

  - by stickynips

  I had this exact setup working previously, but after a reformat it went screwy on me. I have an Onkyo A/V Receiver hooked up to my PC, via optical S/PDIF. Attached to the receiver is a 5.1 speaker setup (tested and working fine with my Xbox via the receiver). It seems to me that the audio channels are getting mixed up somehow between the PC and the receiver. I have a 5.1 test file which plays a sounds through each speaker individually. The channels are mixed as such: "Left Front" plays through my Right Front speaker "Center" plays through my Left Front speaker "Right Front" plays through my Center speaker "Left Rear" plays through my Subwoofer "Right Rear" plays through my Left Rear speaker I've tried downloading the latest Realtek HD Audio Drivers and the Realtek HD Audio Manager, but neither makes any difference. If there's a way I can manually rearrange the channels I believe it would fix the problem, but as far as I know this is impossible. edit: Sorry, I've forgotten some basic info. I'm running Windows 7 x64. The sound card is Realtek ALC892 embedded in a GIGABYTE GA-890GPA-UD3H AM3 motherboard.

  Read the article

• How can I set up a touchscreen as the non-primary monitor in a dual monitor situation?

  - by bazzjedi

  I have been looking for information about using a second monitor, and thought of using a touchscreen. Will a touchscreen monitor work in a dual setup if it is not the main monitor? I haven't found any information on this; I've only found information about the touchscreen being the main monitor. That is, except at this SU question (snippet below): If you mean do the touch screen features still work on the other machine, the answer is yes. Past that, you can even see some of the touch screen features on a non touch screen monitor (just not the multi touch features!) For example, on the taskbar, click (without releasing) on any icon and then drag the mouse up, and you will see that it does the same as using your finger and dragging up. I have a HP 2510 for the main monitor. I'm thinking of adding a HP 2310ti (the touchscreen) as the secondary. My graphics card is a geforce gtx 295. I'm running Windows 7 Professional.

  Read the article

• Building vs buying a server for an academic lab [closed]

  - by Roy

  I'm looking for advice on the classic build vs buy question. We need a new linux server to run Matlab computation on in our lab (academic). Matlab parallel computing toolbox licence allows up to 12 local workers so we are aiming at a 12 core server with 4GB memory per core (total of 48gb). The system will have an SSD for the OS and a raid-5 (4x2tb) for data. I looked around and found a (relatively) cheap vendor, Silicon Mechanics, that offers a system to our liking (specs below) for $6732. However, buying the components from newegg cost only $4464! The difference is $2268 which is 50% of the base cost. If buying from a company can be thought of as a sort of insurance, basically my premiums are of 50% of the base cost which to me sounds like a lot. Of course any downtime is bad, but the work is not "mission critical", i.e. if it takes a few days to fix it when it breaks its no the end of the world. If it takes weeks to months then its a problem. If it breaks 2-3 times in 3 years, not too bad. If it breaks every month not good. In term of build experience, I set up a linux cluster in grad school (from existing computers) and I build my home pcs but I never built a server before. The server components I'm thinking about: 1 x SUPERMICRO SYS-7046T-6F 4U Tower Server Barebone Dual LGA 1366 Intel 5520 DDR3 1333/1066/800 ($1,050) 12 x Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) ECC Unbuffered Server Memory ($420) 2 x Intel Xeon E5645 Westmere-EP 2.4GHz LGA 1366 80W Six-Core ($1,116) 4 x Seagate Constellation ES 2TB 7200 RPM SATA 6.0Gb/s 3.5" ($1,040) 1 x SAMSUNG Internal DVD Writer Black SATA ($20) 1 x Intel 520 Series 2.5" 180GB SATA III MLC SSD $300 1 x LSI LSI00281 PCI-Express 2.0 x8 MD2 Low profile SATA / SAS MegaRAID SAS 9260CV-4i Controller Card, $695

  Read the article

• Asus PCE-N53 11n N600 PCI-E Adapter on 3.x kernel

  - by CITguy

  Problem ASUS PCE-N53 wireless NIC doesn't work for latest versions of the linux kernel. How do I get it working on my system? (Note: I'm posting the answer I've found for others to use.) Installing Driver for Linux 3.x Kernel ASUS provides Linux drivers from their website, but it mentions that the driver supports "Linux Kernel 2.6.x", so it won't work without a some modifications to the driver code. Fortunately, an archlinux forum mentions similar problems and one user was able to create a patch for kernel 3.8.x that seems to work with kernel 3.11.x. Here's how I got it working: Prerequisites Ubuntu: sudo apt-get install build-essential Arch: sudo pacman -S base-devel Steps: 1. Download the driver from the ASUS website The download can be found under "Support Drivers & Tools". 2. Unzip the contents of the downloaded file cd into the new directory 3. Patch The arch forum mentions a 3.8 patch file that needs to be downloaded. Download rt5592sta_fix_64bit_3.8.patch to the current directory. tar -xvf {driver_source.tar.gz} cd into the directory created in previous step patch -p1 < ../rt5592sta_fix_64bit_3.8.patch 4. Compile NOTE: You will need to use sudo for it to compile properly. sudo make sudo make install sudo modprobe rt5592sta 5. Enjoy If all is well, you should now have a working card.

  Read the article

• Sudden and frequent hangs on desktop computer: mobo or CPU fault?

  - by djechelon

  I have a desktop computer equipped with an ASUS Crosshair 2 Formula and a Phenom x6 3.2GHz CPU. My problem is that often the computer will hang all of a sudden, completely stopping responding. When that occurs, reset key is inoperative and power button turns the computer off but is unable to turn it back on. I have to physically disconnect power cable. The problem can occur anytime, when I'm booting Windows, when I'm logging in, when I'm listening to a song, when I'm browsing Internet, etc. It always occurs after very few minutes of 3D gameplay I thought it was a video card fault. I had 3 8800GTX so I could try all combinations of them: didn't fix I thought it was a RAM problem: I tried running with only a subset of my DDR2 banks but didn't fix. Almost every time I have to reset and reconfigure BIOS (without AHCI, Win7 won't boot, so I need to restore a few things). If I enable AMD Live, Cool&Quiet or other things from CPU configuration menu I'll be sure that the computer won't reach Windows desktop in 99% of cases (it randomly hangs somewhere in the boot process or even in the BIOS POST). Another interesting thing is that during the POST process the computer always takes unusually long time detecting USB devices (LCD POSTer shows USB INIT), and I've also tried disconnecting all USB devices but didn't take less time to POST BIOS revision is 2702, the latest. Today I found a different behaviour once: during boot screen I got a BSOD with error Stop 0x00000101 A clock interrupt was not received on a secondary processor within the allocated time interval, and this is usually related to overclocking, but I never overclocked my CPU. Judging from the description of my problem, hoping someone had the same and fixed, and since I don't have a spare CPU or motherboard for replacement, I'd like to ask if you think this is a problem with faulty CPU or faulty motherboard, and if I can perform additional tests (I mean software tests because of my lack of spare components) to identify the component to replace.

  Read the article

• External Storage for 2TB of backups and 4TB of data RAID level? HW vs Software?

  - by Jerry Mayers

  I have a Mac Mini set up as a media center/file server. Currently I just have a hodgepodge mess of external drives for storage. I'm maxed out, and I have some new laptops on the way with much larger drives and I need to work out a good storage solution for backing them up, as well as storing media on the server. I need around 2 TB of storage for the time machine backups from my various systems and around 2 TB more for media. I would like to build this to handle around 6 TB total so I have some growing room. Since I'm using a Mac Mini as the server I need to use external enclosure(s) that support USB 2 or Firewire 800 (preferred) or gigabit Ethernet. Performance of the system isn't a huge concern since the majority of the access from other computers is done over 802.11N. I plan on using 2TB drives, for the final version, but initially I'll try and use my existing 2 (1TB) drives + some new 2TB drives, and swap the 1TB ones out as I fill up. As to the actual questions: Should I use hardware RAID in some enclosure? Because if the enclosure dies I have to find an identical one to get to my data right? Wouldn't a software RAID be better as I can use any method of connecting the drives to the system? Remember OS X server is my OS. What if I had to reinstall OS X, can I restore the software RAID easily? What RAID version should I use? For the 2TB used for the time machine disk I don't see why I need RAID here, just a single 2TB drive since its already the backup, but for the remaining 4TB it would be the only copy of the data so I should build some redundancy. I had a RAID 5 setup using a cheep RAID PCI card years ago running RAID 5 in a 2 TB array and when a drive died it wanted 48 hours to rebuild. Is this crazy slow for a setup of this size or is this to be expected? Any suggestions as to drive enclosures?

  Read the article

• Second monitor stopped being recognized by Windows

  - by Eric J.

  One of the developer PC's running Windows Vista Ultimate had the second monitor stop being recognized in Windows overnight. There were no hardware or driver changes at the time, though I have subsequently updated to the latest nVidia drivers (card is NVIDIA GeForce 210). The non-recognized monitor IS recognized during the boot sequence. In fact, only the "bad" one shows the POST or the Windows loading screen. At some point during Windows initialization after the loading screen disappears and before the logon screen appears, the active monitor switches. Any thoughts? UPDATE: When I open the Vista monitor properties window, I see my primary display and secondary display depicted. The primary one is portrayed as the regular blue box, but the secondary one is portrayed greyed-out. I have the option to "Extend desktop to this monitor", the only resolution is 800x600, and all of the advanced monitor properties are greyed out as well. If I opt to extend the desktop, the greyed-out box turns blue, when I then select Apply the screens flash as usual and I'm given the 15 second countdown to accept the new settings and when I do, everything returns to the previously broken state... secondary monitor is portrayed greyed-out again. At no point is the desktop shown on the secondary monitor.

  Read the article

• CPU temperatures high on new build after gaming

  - by Reznor

  My friend had a problem with his computer a while back. His games were crashing, even within the menus. He was stumped as to what the problem was, so I posted on here requesting help. He found out the day later, when his computer would start up but wouldn't display anything on the screen. His video card must have came screwed up. So, he got a replacement. Now, there's a new problem. His temperatures, which were acceptable before, are now insanely high. His GPU temperature runs 70-80c, which is understandable considering he's running his games maxed out, but the real problem here is his processor and motherboard temperatures. All four of his cores are running at 88-90c after coming out of a game. His motherboard temperature was also 70c at one point. In terms of cooling, his case should definitely be adequate. He has an Antec Twelve Hundred. He's using stock fans. The cable management in his case is very good; better than average. He's using the stock heatsink with the processor too, but note, it was fine before the replacement, so it isn't like there's some inherent problem. He has checked the case too. Everything's fine! No cables in the way. The heatsink is seated properly. He turned his case fans up to high, as well, but the temperatures are persisting. Could the processor be overheating due to running games maxed out? Any ideas?

  Read the article

• Good process/software for organizing photos past/present

  - by Matthew

  So I have tons of photos taken all the time. I have a lot from years past that I never went through (meaning deleting duplicates, etc). I've got a new pc with windows 7, and I'm wondering what a good process is to organize those photos. They're in folders that have really no meaning (it used to be people would put them in a folder wherever, even the desktop or somewhere else, not just the My Pictures folder). I'm going to keep all pictures in the "My Pictures" folder from now on. I've used Picasa from g=Google, and it works great. Is this the recommended free software for this? What process do I use to move the old pictures over in to new "organized" folders? Lately in Picasa when I import off my camera card, I would just select something that names the folder after the date it was taken. Is this advised? Just give me ideas on how to stay organized with photos. Should I tag them also? Should I rename the file names? Keep in mind I have over 16,000 photos I'll have to go through, so it can't be anything to thorough.

  Read the article

• Using udev to create a character device based on a driver being loaded

  - by SteveCB

  I'm in the process of setting up RAID monitoring for a number of Dell servers that use the PERC 6i integrated card. We're using Nagios at present and the check_megasasctl plugin seems to fit the bill. However, the plugin relies upon the existence of: /dev/megaraid_sas_ioctl_node This device node doesn't exist by default, you have to create it by hand using something like: mknod /dev/megaraid_sas_ioctl_node c 253 0 Now, to make the existence of this device node persistent across reboots, I thought I could write a udev rule, but as usual, I'm missing something. I thought I could create a file such as /etc/udev/rules.d/10-local/rules that contained: DRIVER=="megasas" NAME="megaraid_sas_ioctl_node" MODE="0600" But this doesn't work - no device node after a reboot. Dmesg output indicates the megasas driver is loaded and functional: megasas: 00.00.04.01-RH1 Thu July 10 09:41:51 PST 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0 megasas: FW now in Ready state Further, I don't see any means to instruct udev on which type of device node to create: character or block. I suspect I'm failing to understand exactly how udev is meant to work. I realise I could just cheat and run MegaCLI in /etc/rc.local, redirecting output to /dev/null; it creates the megaraid_sas_ioctl_node device node as part of its execution. I just thought using udev rules would be a) cleaner and b) a useful learning exercise. Perhaps I should just dump the above mknod command in /etc/rc.local... So how do I get udev to create the /dev/megaraid_sas_ioctl_node device node based on the presence of the megasas driver? Cheers Steve

  Read the article

• Join multiple filesystems (on multiple computers) into one big volume

  - by jm666

  Scenario: Have 10 computers, each have 12x2TB HDDs (currently) in raidZ2 (10+2) configuration, so, in the each computer i have one approx. 20TB volume. Now, need those 10 separate computers (separate raid groups) join into one big volume. What is the recommended solution? I'm thinking about the FCoE (10GB ethernet). So, buying into each computer FCoE (10GB ethernet card) and - what need more on the hardware side? (probably another computer, FCoE switch? like Cisco Nexus?) The main question is: what need to install and configure on each computer? Currently they have freebsd/raidz2, but it is possible change it into Linux/Solaris if needed. Any helpful resource what talking about how to build a big volumes from smaller raid-groups (on the software side) is very welcomed. So, what OS, what filesystem, what software - etc. In short: want get one approx. 200TB storage (in one filesystem) from already existing computers/storage. Don't need fast writes, but need good performance on reading data. (as a big fileserver), what will works transparently, so when storing data don't want care about onto what computer the data goes. (e.g. not 10 mountpoints - but one big logical filesystem). Thanks.

  Read the article

• No sound out of headphone port on laptop

  - by Thanatos

  I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Some edits: Yes, the headphones are in all the way. This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)

  Read the article

• Connecting a laptop to a TV via HDMI

  - by Madmartigan

  I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

  Read the article

• Intermittently uncommunicative subnets

  - by mhd

  Last week proved me a veritable Cassandra: I've always said that it's a bad idea to have only one firewall/router, without a backup or failover. And thus our Cisco PIX went haywire, refusing to route properly. And of course, the only one available here on short notice is me, and while I'm quite grounded in Linux, I'm really a developer not a sysadmin (the fact that this hit me on sysadmin appreciation day is a bit ironic). Anyway, this weekend I tried to hack up a temporary solution: I used an old server with enough NICs (two built-in, four on a card) to serve as a gateway and firewall. Due to some problems with the raid controller, I got only two router distros running, and between Untangle and Ebox I decided for the latter. Now everything is quite okay. I've got all the different subnets we've got here (all with separate switches) talking to each other and even to the internet (Cisco 2800 router, T1 lines). But from time to time (20-60 minute intervals), I get a total routing failure. Our main, office subnet can't talk to our server subnet and can't connect to the internet. This is not the end of a gradual slowdown, either everything's working perfectly or I get a total lack of communication for about two minutes each time. Now I'm a bit at wits end what to check. At least with the default EBox setup, nothing in /var/log shows anything weird and it doesn't exactly have lots of built-in monitoring tools. So I'm hoping someone here could give me some pointers about what to look out for. I did change the ethernet cable from the office switch to the firewall, with no results. I might change switches, although within the switch it seems to work ok enough. Edit: I'm not sure whether this is the sole cause of the problem, but after I noticed a few DHCP entries just before the last drop of connectivity, I tried to reproduce that. And alas, whenever I renew a DHCP connection, I can't access other subnets anymore. Running ISC DHCPD 3.0.6.

  Read the article

• Windows 8 Fails to install with corrupted graphics

  - by Andy

  I am trying to install Windows 8 Pro Upgrade via the download method on an older PC (07-08). It is a Dell Dimension E521 but it has been upgraded with a 3.0 Ghz Dual Core AMD Processor, 120 GB SSD, and 4 GB of RAM. The Windows 8 upgrade assistant did not detect any issues or concerns with upgrading other than I don't have DVD software installed. The system install Windows 8 but on the first boot, corrupt graphics are present. Eventually, the monitor will go into sleep mode and then roll back to Windows 7 Pro X64 which runs fine. I wouldn't be upset over not being able to install Windows 8, but I already paid for the software since I thought there would be no issues upgrading. The Graphics card in the system is the Geforce 7300LE and it has the latest NVidia drivers for Windows 7 loaded. I saw this solution which is similar to my problem: Corrupt graphics during Windows 8 installation However, I have downloaded Windows 8 and I am not sure how to go about modifying the install that resides somewhere on the hard drive. Thanks in advance for any assistance.

  Read the article

• Winamp has slow /skipping video playback on Windows 7

  - by Roy Rico

  Hello, I have Windows 7 x64 (7600 90-day trial version) and Winamp 5.6 installed. When I play a video in Windows Media Player, the video plays smooth, however when I play a video in winamp, the video is mostly ok when played back at the original size (but not completely), but if I play it back in fullscreen, the playback gets really slow. The video's audio track plays just fine. I have a DELL XPS 420 computer (8GB of RAM) with a Nvidia GeForce 8800 CTS 512 video card. I've updated to the latest drivers. I have the default Windows 7 codecs, and the CCCP codec pack which used to be all I needed under Windows XP to play all types of videos. Are the codecs needed for Windows Y the same? What's going on? UPDATE: As suggested, I turned off Aero and winamp ran just fine again. So I just have to wait for winamp to be rewritten to work with the way Vista/Windows 7 runs? UPDATE 2: Winamp has updated their player, and it works great with Windows 7 now.

  Read the article

• Could hybrid SSD + HDD be made with fixed internal partitions?

  - by Aaron

  I was pretty close to getting Seagate's Momentus XT but have been scared off by the many problems reported on forums and feedback sites, especially in Mac Book Pros. So I'm waiting for mk 2 with some extra flash and better reliablilty I'm assuming will come out this year. What would suit me better though is a 32+500 hybrid drive where I have more control over what is on the flash drive and what is on the disk drive. So there are 2 physical partitions within the one 2.5" hard drive enclosure which use different media internally (32GB for core files and 500GB for data and multimedia). The partitions would be locked so they can't be changed. - Or even better, the disk driver just makes them appear as two disks to the OS that share the same bus... Perhaps it's ok if the bios just sees the first drive until the OS is loaded. Is either of it technically possible? Obviously difficult to market outside of the enthusiast market. The SSD memory modules can be pretty small right, so they could even make them a card that plugs into a secondary connection on the enclosure. That would be good for computer builders as well as for upgrading and recoverability. Then future operating systems could recognise these system SSD drives and automatically install the OS + swap files on it. While placing document libraries on the larger data drive. While in the longer term HDD will probably disapear there will always be a trade off between speed, storage size and expense.

  Read the article

• Dual-monitor Windows XP, monitors are "identified wrong"

  - by Susan

  Trying to use a dual-monitor desktop system with Windows XP.... 1 graphics card... with digital/analog outputs. Picking: Desktop - Properties - Settings - Identify It shows "2" as my left monitor... and "1" as my right. How do I switch them around? Here's what I've tried so far: Switch the cables (I can't. I need the digital cable on the better monitor.) Switch the monitors (I can't. One has a few dead pixels.) Drag the 1+2 graphics around (That doesn't change the IDENTIFY numbers.) Pick "use as primary" or "extend" (That doesn't change the IDENTIFY numbers.) Anything else I can try? What exactly controls/switches the "IDENTIFY numbers" around? I know it can be done. For weeks I ran this exact set-up... with the CORRECT numbers appearing on the monitors.... then just recently... after a few reboots... they now appear "switched around".

  Read the article

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• Switch to IPv6 and get rid of NAT? Are you kidding?

  - by Ernie

  So our ISP has set up IPv6 recently, and I've been studying what the transition should entail before jumping into the fray. I've noticed three very important issues: Our office NAT router (an old Linksys BEFSR41) does not support IPv6. Nor does any newer router, AFAICT. The book I'm reading about IPv6 tells me that it makes NAT "unnecessary" anyway. If we're supposed to just get rid of this router and plug everything directly to the Internet, I start to panic. There's no way in hell I'll put our billing database (With lots of credit card information!) on the internet for everyone to see. Even if I were to propose setting up Windows' firewall on it to allow only 6 addresses to have any access to it at all, I still break out in a cold sweat. I don't trust Windows, Windows' firewall, or the network at large enough to even be remotely comfortable with that. There's a few old hardware devices (ie, printers) that have absolutely no IPv6 capability at all. And likely a laundry list of security issues that date back to around 1998. And likely no way to actually patch them in any way. And no funding for new printers. I hear that IPv6 and IPSEC are supposed to make all this secure somehow, but without physically separated networks that make these devices invisible to the Internet, I really can't see how. I can likewise really see how any defences I create will be overrun in short order. I've been running servers on the Internet for years now and I'm quite familiar with the sort of things necessary to secure those, but putting something Private on the network like our billing database has always been completely out of the question. What should I be replacing NAT with, if we don't have physically separate networks?

  Read the article

• how to diagnose a hard system seizure? Dell+Ubuntu

  - by rob

  I've got Ubuntu 9.10 on a Dell Vostro 420 desktop, a little over a year old, which I use for plain vanilla work stuff (email, web, terminal, text editor). Every now and then, at totally random times, it completely freezes on me. Hard. Mouse and keyboard stop working, cursor stops blinking, clock stops moving. All I can do is hold down the power button on the front of the box to shut it off. Sometimes it happens after several months of continuous uptime; sometimes it happens a few minutes after a reboot, while all I've done is open a terminal to look at log files, or maybe firefox to do a google search. Each time, there is nothing at all in /var/log/messages at the time of the crash. This makes it seem like a hardware problem, and indeed a few months ago I opened the box and wiggled everything and the problem went away for a while. But now it's back. I went in and checked everything, took out each RAM card and reseated. No luck. I ran all the system diagnostics (the long version) and everything passed with flying colors. Something is messed up in this box, but without any useful logs or failed tests, how in the world am I going to find it? And of course, Dell's not gonna help me cause I went and replaced Windows with Ubuntu. What steps would you take next to track down this problem?

  Read the article

• STOP 0x7b booting from iSCSI

  - by Michael

  Hi, I've a Windows 2008 SBS running. It boots of iSCSI. That setup worked for months until yesterday. I intended to reboot and gained a: STOP 0x0000007b INACCESSIBLE_BOOT_DEVICE and no idea why. My setup hasn't changed. No new controller, no new or changed iSCSI targets, no new Network Card or IP address changes. I had all Windows Updates on it. Last known good: same STOP. Allow unsigned drivers: same STOP. Safe mode (all variants): same STOP. Mount target from a client: works. Filesystem check fine. I booted of the SBS DVD but in computer repair options my target doesn't appear. When i choose setup the target appears. So, how can i diagnose what's going wrong? Any helpful tools? Any hints? Thanks in advance Michael

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >