Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 210/370 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

  • Separate 2 networks with 1 Windows Server

    - by SamuGG
    The situation is: I have 1 router 192.168.1.1, 1 switch, 1 windows server and a basic LAN of devices accessing it. I need to split into 2 separate LANs with full Internet access each, but isolated from each other. Given that, the server is a Windows Server 2008 R2 with 2 NICs: NIC1: 192.168.1.2 NIC2: 192.168.2.2 The router has no dhcp configuration. Please, can anyone explain gracefully, step by step, what do I need to do? What would be the 2 NICs full configuration? What services do I need to install? I don't want devices on either network to see devices on the other network, they must be completely separate. I guess I'm missing the routing procedure step, but I have no idea how is that done. For example: tell the server that devices with gateway 192.168.2.2 must send traffic for internet to 192.168.1.1 router. Thanks in advance.

    Read the article

  • Macbook not connecting to WIFI

    - by Model Reject
    I have been having this problem all week. My Macbook aluminium can't see my wifi network. I have changed the channel to one that isn't being used by neighbours and my iphone picks it up straight away. In other words, the router is fine. It's just the macbook can't see it. This is driving me nuts if anyone can help... My airport card details... Card Type: AirPort Extreme (0x14E4, 0x8D) Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1) Locale: ETSI Supported PHY Modes: 802.11 a/b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Wake On Wireless: Supported The funny thing is that is was intermitent on Saturday. I had to keep restarting router and it worked for about 5 minutes, now it doesn't connect or see it at all. Tried using kisMAC and it can't see network either. Thanks, C

    Read the article

  • Network outage caused by SMC8013WG Cable Modem/Router ?

    - by mkocubinski
    At work, we have a basic Class C Network. The gateway/router is a SMC8013WG (stock comcast commercial cable modem), and simple unmanaged switch (HP Pro Curve 1400 24G). The SMC8013WG is our default gateway as well as DHCP server. Periodically, I'd say almost every other day.. the entire network will just stop responding. I won't be able to ping/see the gateway, any computers on our local network, or anything on the internet. The only way to fix this is to unplug the Comcast cable modem, wait, and plug back in. This unfailingly fixes the problem. But this doesn't make much sense to me.. shouldn't the network still be fine locally, since everything is plugged into the switch anyway? Why would resetting the router fix this? Can anyone suggest anything to check to in order to narrow this problem down? Just to be clear.. here is the basic topology: { Internet } -- (12.345.67.89) Comcast Cable Modem (192.168.1.1) -- Switch -- 192.168.1.2-254 P.S. Our IT guy is in about 3 hours a day every other week or so, so.. we're kind of on our own most of the time.

    Read the article

  • Why would my network slow down?

    - by monkthemighty
    The network at my work has about 40 computers on it and a quite a few printers. When there are a lot of people working the network will be slow. I can test the ping between my computer and the router and it will keep rising, sometimes to the point that it times out. The router we are using is running Ubuntu on a atom processor and it has 4gb of ram. When the network slows the process Ksoftirq will be using most if not all of the processing power. I have found that Ksoftirq is a process that handles irq requests. Also when the network slows down I have captured packets from the router and using tshark and looked at it using wireshark on my laptop. With the capture show a lot of packets with TCP Dup ACK and TCP Retransmissions. The destinations of the TCP Dup and TCP retransmissions are to most of the computers on the network but there are some that are far more than others. What could this problem be caused by?

    Read the article

  • How to see all nics in Solaris 8/9

    - by help_me
    I have a questions regarding how to see all NICS in the solaris 8/9 SPARC boxes. Even if they are active/inactive. dladm show-link command does not work. cat /etc/path_to_inst could but it's hard to make out the NICS. Also when a cable is disconnected from the NIC ifconfig -a still shows the NIC as "UP/RUNNING" without looking at the system message, is there a way to know that the NIC is unplugged? Thank you!

    Read the article

  • Windows 7 can't reconnect network drives on startup

    - by Znarkus
    Hi! I have this annoying problem that Windows 7 won't reconnect to my network drives on startup. The shares are on an Ubuntu machine. I've tried every possible solution I've found: Enable password on logon to give the network interface time to boot up Check Connect using different credentials Tried both options in this screen Sorry for the long post. Can You please help me to solve this?

    Read the article

  • Potential impact of large broadcast domains

    - by john
    I recently switched jobs. By the time I left my last job our network was three years old and had been planned very well (in my opinion). Our address range was split down into a bunch of VLANs with the largest subnet a /22 range. It was textbook. The company I now work for has built up their network over about 20 years. It's quite large, reaches multiple sites, and has an eclectic mix of devices. This organisation only uses VLANs for very specific things. I only know of one usage of VLANs so far and that is the SAN which also crosses a site boundary. I'm not a network engineer, I'm a support technician. But occasionally I have to do some network traces for debugging problems and I'm astounded by the quantity of broadcast traffic I see. The largest network is a straight Class B network, so it uses a /16 mask. Of course if that were filled with devices the network would likely grind to a halt. I think there are probably 2000+ physical and virtual devices currently using that subnet, but it (mostly) seems to work. This practise seems to go against everything I've been taught. My question is: In your opinion and  From my perspective - What measurement of which metric would tell me that there is too much broadcast traffic bouncing about the network? And what are the tell-tale signs that you are perhaps treading on thin ice? The way I see it, there are more and more devices being added and that can only mean more broadcast traffic, so there must be a threshold. Would things just get slower and slower, or would the effects be more subtle than that?

    Read the article

  • Central Storage for windows user accounts homedirs .. hardware/software needed?

    - by mtkoan
    We have ~120+ users in our network, and are endeavoring to centralize logon authentication and home directory storage server-side. Most of the users are Windows 2000/XP machines, and a few running Mac OS X. Ideally the solution will be open-source-- can this all be managed from a Linux server running LDAP and Samba? Or would a hacked-NAS Box with a FreeNAS or similar suffice? Or is Micro$oft's Active Directory really the preference here. Is it viable to store PST files on this server for users to read from and write to? They are very large ~1.5gb. We have no mail server (or money) capable of Exchange or IMAP, only an old POP3. What kind of hardware horsepower and network architecture should we have for this kind of thing?

    Read the article

  • Cisco 861 Router forces one-to-one NAT

    - by Slurpee
    I have a cisco 861 router that only allows one-to-one NATs in order to access the Internet. I would like for computers to get an address via DHCP from this router, and be able to access the Internet without needing to set a static NAT to one of my public IPs. What is wrong with the configuration? I have a basic understanding of the IOS CLI, most of the configuration file (edited for content) was created by my company's long gone Senior Network Engineer.

    Read the article

  • how to build network across buildings ?

    - by Omie
    Hi ! I need some help in building a network between hundreds of computers spread across multiple buildings of my college. Yes, I'll be doing this as a part of my college project. Please see this image, it will give you enough idea of what I'm trying to achieve. http://i.imgur.com/rOohx.png All the computers in all buildings should be able to connect server. Once network is up, there will be a set of services over intranet and network use will be moderate. well, say there will be an email server and a http server. My point is, I cannot afford much of performance loss. It feels easy to connect computers inside 1 building to each other, however, I'm clueless as to how to connect all of them to server. I mean, just 1 cable won't be enough to connect 1 building to server, right ? How should I go with it ? I am not expecting detailed configuration. Just heads up will do :) Thanks

    Read the article

  • Combine multiple network interfaces to connect to a dedicated server

    - by Dženis Macanovic
    this is an underpaid employee writing, who's apparently responsible for all the IT stuff in a very small (non-IT) company. Today said company got a bunch of PCs/workstations, a switch, a computer that's supposed to be used as a router, two DSL connections (each 16 MBit/s downstream and 1 MBit/s upstream) and a dedicated server which is hosted and managed professionally by a larger local company with some decent connection speed (1 GBit/s both directions if I'm not mistaken). This is what I've set up (note I'm not making use of the second DSL connection at all)... ETH0 ETH1 [ SWITCH ]---[LINUX DEBIAN ROUTER]---[DSL MODEM 1]---[INTERNET] | | | PC1 | | PC2 | ... ... when my boss asked me, if it was somehow possible to get 32 MBit/s downstream and 2 MBit/s upstream. At that time I replied "no" without thinking too much about it. Now I've just had the following idea... ETH1 ETH0 ETH0 ,---[DSL MODEM 1 (NON-STATIC IP)]---, ,---, ETH0 [ SWITCH ]---[LINUX DEBIAN ROUTER] [INTERNET] [LINUX DEBIAN SERVER]---[INTERNET] | | | '---[ DSL MODEM 2 (STATIC IP) ]---' '---' PC1 | | ETH2 ETH0 PC2 | ... ... but I have absolutely no clue how to implement that. Would that even be possible? What would the masquerading rules look like on the router? What about the server? I didn't find anything on the internet, mainly because I couldn't come up with any good keywords to search for to begin with. English obviously isn't my first language. Thanks in advance for your time!

    Read the article

  • Multiple network interfaces and UDP packets distribution

    - by Robert Kubrick
    I have a Linux server with 2 1Gb network interfaces eth1 and eth2. If I start 2 clients listening to the same multicast address and each client connects through a different NIC (say client 1 listens to the multicast through eth1 and client 2 through eth2), then client 2 gets duplicate UDP packets. If both clients use the same interface eth1 on the other hand, both clients work fine. I have already tried to set arp_filter and proxy_arp to 1 (arp flux issue) but it hasn't solved the issue. Is this a Linux kernel problem? Or is there another way to setup the interfaces correctly?

    Read the article

  • Windows 7, network transmit (send) not working

    - by user326287
    My Win 7 works 2 years without problem. But now, I can't transmit (send) big data on LAN/Internet. I can: - Ping anything - Browse Internet, download files at full speed - Send e-mails with very small attachments. - Testing download speed on Speedtest.net, measure stable full speed. I can't: - Testing upload speed on Speedtest.net. Upload stuck.. - Save/send email messages with big (128k) attachment, independent from e-mail provider or e-mail box. THIS IS NOT A HARDWARE/CABLE/CARD OR OTHER NETWORK DEVICES PROBLEM! When I boot from a Linux Live CD, without ANY hardware change, all data sending, testing works correctly, at full speed. I have tried already in Win 7: - Disable Windows/3rd party Firewall completely - Reset IP stack parameters (netsh int ip reset c:\resetlog.txt) - Computer restore - Reinstall LAN driver When I inspect the packets in Wireshark in Windows, I see lot's of (maybe 60% of sent packets) "TCP Retransmission". Sometimes receive "TCP Dup Ack" or "TCP Out-of-Order". Linux don't do this. Thank you for the help.

    Read the article

  • Can I split one ethernet line coming out of my wall into multiple separate lines?

    - by Burteçin 'Turk' Sapta
    Hi all and thanks in advance. I'll start with some background. I live in an apartment which provides internet service included in the rent. They use company called pavlov for the internet http://pavlovmedia.net/ wireless seems to be working fine but wired connection is at least %30 faster. Ethernet, cat5 outlet is built in the wall, and there is only 1 outlet in each room. I would like to take this 1 outlet coming out the wall and multiply it into 4 wires, for desktop, playstation, tv and laptop without loosing any internet bandwidth. i have absolutely no idea weather this line is coming from a switch or a router but i have been researching Ethernet splitter, routers, switches, hubs and haven't found a solid answer. what is the best solution for me? thank you once again! EDIT: ok this picture cleared few things http://www.home-network-help.com/images/home-network-expanded.jpg so seems that an ethernet switch is to ethernet as a USB hub is to USB. what is really 10/100Mbps Network Switch and what is the cap?

    Read the article

  • VMware vSwitches and spanning tree

    - by dunxd
    I have two redundant core switches I want to connect to a new vSwitch I am setting up on a VMware ESX host. The switch will have two physical NICs each of which will connect to one of the core switches. The core switches are connected. If this was a physical switch, I would worry about connecting it to both core switches, because this would create a network loop. Do I need to worry about this for a VMware virtual switch? VMware's documentation says it is not possible to connect two vSwitches in a loop, therefore STP is not required. However, I am worried about connecting two physical switches together via a vSwitch.

    Read the article

  • Why should I use a switched network over routed?

    - by SRobertJames
    Now that routers are affordable, why should I build a network using Layer 2 switches, which degenerate to broadcasting under poor conditions, and not just use real routing at Layer 3? Edit: Got some great replies. Let me clarify the question: Of course, at the lowest level, you want to plug your end nodes into a switch, not a router (as demonstrated by AlReece). I'm referring to switches which are used to bridge traffic between segments - that is, switches connected to other switches.

    Read the article

  • Windows 2008 Server network issues

    - by Snowflow
    I have this one server that just doesn't want to be on the internet It's a new server, a twinblade, the other twin works, but not this one. It can connect fine to everythign else in the LAN, but cannot go out on the net It can be reached by ICMP requests over the net (the nagios server can probe it, but not ping it for instance), but not TCP Everything seems fine both in firewall and machine, i get no issues. Anyone care to help me out where i can start looking, i'm seriously confused. edit: it can ping gateway and through the sonicwall site to site VPN, it\s also able to resolve DNS. the only thing it can`t do is reach anything outside of LAN/VPN

    Read the article

  • Prompt for credentials in a batch script

    - by Inteladu
    I am trying to perform a network copy of files via a batch script. However, as usual there are some networks where the 'copy' command fails saying 'Bad username or password'. And when I try using xcopy, it never works. I have also tried using, net use \\server\ password /user:domain\username net use \\server\ipc$ /user:domain\username password But none of these work. Any ideas on how I can accomplish this? I was also wondering if it is possible to prompt the ususal Windows login dialog for this...(just an idea) Any leads on this would be highly appreciated. Thanks & Regards, inteladu

    Read the article

  • Cannot enable wireless Ubuntu 10.04

    - by woaddoa
    I have recently installed Ubuntu 10.04, however I am having trouble getting wireless to work. Ubuntu says that wireless is disabled, and I am unable to enable it. I have tried Administration Hardware Drivers however the only drivers listed are Nivida graphics ones. I am unsure what to do as I do not think the process is the same as searching for drivers for a windows machine. Any advice appreciated.

    Read the article

  • Where is this error message coming from?

    - by jordanpg
    Recently switched to a new ISP after a move, running Chrome under OSX 10.7. I see the following error when visiting various sites -- no particular pattern -- from time to time. This is the entire message. It is the only thing that appears in my web browser. The problem fixes itself in a few minutes. Probably a lookup error of some sort, but I don't recognize it. What piece of software is serving this message? What is happening? What is this Reference # referencing? Invalid URL The requested URL "/articles/6517181", is invalid. Reference #9.6f200f6c.235618518a.b7e910cf

    Read the article

  • How to retrieve connection details of CheckPoint SSL Network Extender?

    - by amoe
    My workplace uses a Java-based VPN tool named CheckPoint SSL Network Extender. I would like to configure the VPN connection myself using stock OS tools, because I find the applet to be rather unstable. How would I go about getting all of the connection details needed to manually connect to the VPN? My workplace only supports the official client. When I am connected with the Java applet, if I run ipconfig /all I can see that a hidden network connection is created named Check Point Virtual Network Adapter For SSL Network Extender - Packet Scheduler Miniport. I can see the various IP and DNS details there as well. However, because I need to log in to the applet-based tool, I presume I need to export some kind of key in order to use OS tools to configure this. Is this even possible? Answers for any OS are great although I am using Windows XP to test, and also want to use Linux clients.

    Read the article

  • How can I solve Windows PPTP VPN issues?

    - by Robin M
    I'm having persistent problems with Windows PPTP VPN connections. The VPN appears up whilst the tunnel won't transfer traffic (ping to a remote IP within the VPN works for a while, and then fails). The client receives routing information via DHCP. When the connection fails, the routing table is still correct so I don't think it's a routing problem. My internet connection is via an ADSL2 line. There's software to deal with PPTP problems, like TunnelRat, but I don't want to install v1.1 of the .NET framework and I'd rather get to the bottom of the problem (I have multiple VPN connections and some are more unreliable than others). What can I do to get to the bottom of this? Alternatively, what can I do to keep the connection alive?

    Read the article

  • No internet through a web browser but Skype still works

    - by kim3er
    We get our office broadband through a BT Business Broadband WiFi router. We have a mixture of macs and windows PC/laptops connecting to it at any one time. All devices are able to connect to the wireless signal with pretty much full signal. However, only two computers (one windows, one os x) are able to consistently connect to the internet. The other three (one windows, two os x), while they can always connect to the wifi, exhibit one of three characteristics. No internet at all. Programs like Skype work, but no internet through a browser. Internet works, but with intermittent lag when switching between different sites. I'm assuming while trying to resolve different addresses. Ignoring point 1 for moment, my gut is telling me DNS. It is an up to 20MB line that usually gets to between 13MB and 15MB downstream. The router is capable of dealing with the amount of wireless devices that we're throwing at it. Has anyone got any suggestions for how I might further diagnose this problem (preferably in OS X)? Rich

    Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >