Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 211/370 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

  • WIndows Hosted Network

    - by Nandakumar V
    I have created a hosted network in my windows7 system. The netsh wlan show hostednetwork command gives the output Hosted network settings ----------------------- Mode : Allowed SSID name : "rambo" Max number of clients : 100 Authentication : WPA2-Personal Cipher : CCMP Hosted network status --------------------- Status : Started BSSID : xx:xx:xx:xx:xx:xx Radio type : 802.11n Channel : 11 Number of clients : 1 xx:xx:xx:xx:xx:xx Authenticated But I have forgot the password for this connection and after some googling I found the command netsh wlan refresh hostednetwork YourNewNetworkPassword. But on executing this command it get the error C:\Users\user>netsh wlan refresh hostednetwork rambo123 Invalid value "rambo123" for command option "data". Usage: refresh hostednetwork [data=]key I have no idea what is wrong with this command.

    Read the article

  • Asterisk server firewall script allows 2-way audio from incoming calls, but not on outgoing?

    - by cappie
    I'm running an Asterisk PBX on a virtual machine directly connected to the Internet and I really want to prevent script kiddies, l33t h4x0rz and actual hackers access to my server. The basic way I protect my calling-bill now is by using 32 character passwords, but I would much rather have a way to protect The firewall script I'm currently using is stated below, however, without the established connection firewall rule (mentioned rule #1), I cannot receive incoming audio from the target during outgoing calls: #!/bin/bash # first, clean up! iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD DROP # we're not a router iptables -P OUTPUT ACCEPT # don't allow invalid connections iptables -A INPUT -m state --state INVALID -j DROP # always allow connections that are already set up (MENTIONED RULE #1) iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # always accept ICMP iptables -A INPUT -p icmp -j ACCEPT # always accept traffic on these ports #iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT # always allow DNS traffic iptables -A INPUT -p udp --sport 53 -j ACCEPT iptables -A OUTPUT -p udp --dport 53 -j ACCEPT # allow return traffic to the PBX iptables -A INPUT -p udp -m udp --dport 50000:65536 -j ACCEPT iptables -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT iptables -A INPUT -p udp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -p tcp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -m multiport -p udp --dports 10000:20000 iptables -A INPUT -m multiport -p tcp --dports 10000:20000 # IP addresses of the office iptables -A INPUT -s 95.XXX.XXX.XXX/32 -j ACCEPT # accept everything from the trunk IP's iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT # accept everything on localhost iptables -A INPUT -i lo -j ACCEPT # accept all outgoing traffic iptables -A OUTPUT -j ACCEPT # DROP everything else #iptables -A INPUT -j DROP I would like to know what firewall rule I'm missing for this all to work.. There is so little documentation on which ports (incoming and outgoing) asterisk actually needs.. (return ports included). Are there any firewall/iptables specialists here that see major problems with this firewall script? It's so frustrating not being able to find a simple firewall solution that enabled me to have a PBX running somewhere on the Internet which is firewalled in such a way that it can ONLY allows connections from and to the office, the DNS servers and the trunk(s) (and only support SSH (port 22) and ICMP traffic for the outside world). Hopefully, using this question, we can solve this problem once and for all.

    Read the article

  • What command line tools for monitoring host network activity on linux do you use?

    - by user27388
    What command line tools are good for reliably monitoring network activity? I have used ifconfig, but an office colleague said that its statistics are not always reliable. Is that true? I have recently used ethtool, but is it reliable? What about just looking at /proc/net 'files'? Is that any better? EDIT I'm interested in packets Tx/Rx, bytes Tx/Rx, but most importantly drops or errors and why the drop/error might have occurred.

    Read the article

  • Setting up remote filesystem access without root privileges

    - by Luke Massa
    OK here's the situation. I have a computer A with complete admin access, and computer B (actually an account I login to) with very limited access. I am trying to make it so I can access a device on computer A (an external harddrive) on B. If I had more access to B, I would just mount the device on B, but I can't do that. I can ssh both directions, so theoretically I can copy data both directions, so it should be possible. I think a NFS might be helpful for me, but from what I've looked at, they all require the client to at some point perform a "mount" operation, something my client can't do. Thoughts?

    Read the article

  • No internet through a web browser but Skype still works

    - by kim3er
    We get our office broadband through a BT Business Broadband WiFi router. We have a mixture of macs and windows PC/laptops connecting to it at any one time. All devices are able to connect to the wireless signal with pretty much full signal. However, only two computers (one windows, one os x) are able to consistently connect to the internet. The other three (one windows, two os x), while they can always connect to the wifi, exhibit one of three characteristics. No internet at all. Programs like Skype work, but no internet through a browser. Internet works, but with intermittent lag when switching between different sites. I'm assuming while trying to resolve different addresses. Ignoring point 1 for moment, my gut is telling me DNS. It is an up to 20MB line that usually gets to between 13MB and 15MB downstream. The router is capable of dealing with the amount of wireless devices that we're throwing at it. Has anyone got any suggestions for how I might further diagnose this problem (preferably in OS X)? Rich

    Read the article

  • Cannot connect to a shared network drive

    - by dublintech
    I am using windows 7, I cannot connect to a shared network drive on another machine. I can ping the machine. I can remote desktop connect to the machine. The machine is on the same subnet My friend with the exact same laptop as me (and on the same network, same workgroup) can connect to the shared folder. The machine I am trying to connect to and my friends machine can both see shared folders on my machine. I also cannot see shared folders on the friends laptop. When I select diagnose, windows tells me nothing useful. When I select see details on the error pop up, I see: Error code: 0x80004005 (google doesn't help much) I can nbtstat -a the machine who has the shared folder. When I try with my firewall turned off the same happens. I have ensured my windows 7 has all updates. I run security essentials to ensure my laptop is clean. I run ccleaner to clean up my registry. Same error. I have tried with my laptop on both wireless and ethernet. As you can imagine, I am banging my head against the wall on this one.

    Read the article

  • hosting website on a private network

    - by razor
    i'm currently running a website off 3 linux servers. I'd like to setup a private network and only allow port 80 traffic to one of the servers. I'd also like to setup a vpn so only I can access the servers via ssh or any port for developing/debugging. How hard is this to setup and what do I need to get? Do enterprise/commercial routers have vpn functionality built in? how do I handle DNS? eg- www.mydomain.com would need to point to the router, which forwards traffic to the webserver. Do I set the A record to the router, and somehow tell the router which server to send the http request to? And how would I make server1.mydomain.com resolve to server1 within the private network (without editing host files)? Would I need to run my own DNS (eg- powerdns?) to do this?

    Read the article

  • lan extension over wide area

    - by avinash
    when we use technology like leased line to extend a lan over a wide area(like when connecting two offices such that hosts in both offices use private ip addresses) , why do we use encapsulations like ppp or hdlc...what can't we use the ethernet header to communicate because mac addresses are unique and can easily be used to identify hosts just like a small area lan... this question may seem a bit absurd but it has been bugging me...so plz explain

    Read the article

  • Windows 8 Hidden Downloading? Slow Internet?

    - by EApubs
    After upgrading to Windows 8, im facing a very slow download speed. My router and the NIC is working fine because on the same PC I also have Linux. In Linux, everything works fine. When checking through the task manager, it shows that the system use the full bandwidth 1Mbps even without a download. The process menu doesn't show whats taking much bandwidth. The bitdefender's firewall also shows network activity. Is there any hidden apps downloading? How to fix this?

    Read the article

  • Is it possible to host a website with Apache HTTP through a ZyXEL EQ-660R modem and a Netgear WGT624v3 wireless router?

    - by Vortico
    Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address. I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop. ZyXEL's website is no help, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck. Could someone direct me toward a solution or recommendations for more promising hardware? Or should I admit defeat and explore other hobbies? :)

    Read the article

  • Problem with Lenovo x200s Wifi under Ubutu Karmic

    - by oneself
    Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

    Read the article

  • peer to peer disk image transmission

    - by JackWu
    Installing linux/windows through pxe works smoothly for me. But downloading images(especially windows) is a headache. Let alone the time, bandwith usage is horrible. And p2p tech comes to my mind. But I have no clue how it works or where to start. Anyone knows how to setup p2p local network, and applies that on image transmission? Any advice, tutorials or experiences will be great. Thanks in advance.

    Read the article

  • Is this one network or two networks?

    - by colemik
    I have this simple question and really don't know the answer. Does the drawing below show one network or two networks? This is a question about the definition of a network from the OSI / TCP/IP model point of view: From one point of view, those are two L2 networks connected with a bridge. From another point of view, this is one L3 network, that can have a common L3 address space (like 10.1.1.0). PS If this question is too dumb, please move it to Superuser.

    Read the article

  • Wifi network stopped being visible (and usable) (Linksys wag320n)

    - by s427
    Basically, my wifi network simply stopped working for no apparent reason. It doesn't appear in the list of the available networks anymore. I can see all my neighbors' networks, but not mine. It's as if it doesn't exist anymore. The internet connection (non-wifi), which goes through the same modem/router, is fine though. I already had a similar problem about one year ago (see here: Wifi network SSID not visible ), just after buying this very modem. I finally got it to work after performing two factory resets and getting rid of the Cisco "Magic" software; but this time it's not working. I use a linksys router-modem (WAG320N) which is directly connected (via network cable) to my desktop computer (Windows 7). I have (mainly) two devices that use the wifi network: my phone (Samsung Galaxy Nexus) and an Asus tablet (TF201, aka Transformer Prime). I also resurrected an old laptop computer (Dell, running Windows XP) to test that, and it doesn't see anything either (apart from the 20 other wifi networks, of course ^^). This wifi network was working just fine and has been for about a year. I haven't touched the modem settings so I have no idea what's causing the problem. I tried: making my phone "forget" about my network, hoping it would see it again after that: no luck. re-entering the network informations (SSID/password) manually on my phone: still no luck (says it's not in range) exporting the modem configuration, resetting the modem (factory reset, via modem admin), restarting it, importing the configuration: nope. factory reset, turning it off for 15 minutes, restarting, re-factory reset, and entering the configuration manually: still nothing. Has anybody experienced something similar before? Have you any suggestion to fix that? Thanks in advance. PS: to clear things up, here are the settings of my modem regarding wifi: Basic wireless settings: Configuration: manual Radio Band: 2.4GHz Wireless Network Mode: B/G/N-Mixed SSID: s427 Channel Bandwidth: Wide - 40 MHz Channel Wide Channel: 9 - 2.452GHz Standard Channel: 11 - 2.462GHz SSID Broadcast: Enable Advanced Wireless Settings AP Isolation: Disable Authentication Type: Auto Basic Rate: Default Transmission Rate: Auto N Transmission Rate: Auto CTS Protection Mode: Disable Beacon Interval: 100 DTIM Interval: 1 Fragmentation Threshold: 2346 RTS Threshold: 2346

    Read the article

  • Run command on init and restart on errors

    - by chersanya
    I have internet access on my PC through proxy through SSH, so every time I need to execute ssh -L PORT:SERVER:PORT LOGIN@SERVER and then type a password. After each network failure or reconnect this command has to be executed again. I've got bored of it and look for a way to do this automatically: first run this after boot (it doesn't seem to be a problem - put this command in some init file and that's all) and then rerun it (if possible, then type password) on each network failure. Is it possible, and how? OS Linux (Debian)

    Read the article

  • Secondary fallback/failover network on Cisco ASA

    - by tyranitar
    In my network there is a Cisco ASA 55x0 with "inside" interface (network 192.168.79.0/24) and "outside" interface (network 89.x.x.48/29) There is this nat rule: object network NAToutside nat (inside,outside) dynamic interface and the static route route outside 0.0.0.0 0.0.0.0 89.x.x.49 1 and all ACL rules. Now I have another new outside network by another ISP called "outside2", this network is already natted and the Cisco ASA in in the network 192.168.70.0/24. I would use this network as a fallback one. So I set the nat rule: object network NAToutside2 nat (inside,outside2) dynamic interface and the static route with a different metric route outside2 0.0.0.0 0.0.0.0 192.168.70.1 2 Clearly it doesn't work: when I disconnect the outside ethernet cable no workstation can connect to the Internet throught the outside2 network... What do I need more?

    Read the article

  • Routing connections through VPN based on hostname (not IP range)

    - by Michal M
    This bugs me immensly. I need to connect to client's network through VPN. But I definitely do not want to send all the traffic through client's network so this option is out of question. What I need basically is for the OS to know that all client's network subdomains (*.example.com) need to go through the VPN connection. I tried a couple of options: Changing order of services and setting the VPN on top, but this works the same as "Send all traffic over VPN connection". Using "VPN on Demand" option from network advanced options, but this feature is quite rubbish to be honest. Seems to work only in Safari (?!) and it doesn't route the connection, but it basically triggers the OS to connect to the selected VPN. The reason I need it to work based on hostnames rather than IP range is simple - my client has a lot of servers inside his network and it's impossible for me to remember all IPs. They are all within a range, but this doesn't help me remembering. Another option would be to put the VPN connection on the bottom of network services and untick "Send all traffic..." and then put all known hostnames in hosts file, but considering there could be hundreds of servers (therefore hostnames and ips too) it ridiculous job. And if new server appears on the network I'd need to edit the hosts file again. Sisyphean labours. However this works on Windows very simply. If a hostname is not available through default network interface, then it seems to try VPN connection and this works brilliantly. So, how can I achieve that on Mac, then? I know client's internal DNS addresses if that is of any help (like directing a certain domains through a different DNS)? PS. Using latest version 10.6.6. PS2. I am using VPN to access intranet, version control servers (svn://), samba shares and for SSH access to servers.

    Read the article

  • How to prefer ipv6 over ipv4 only for specific websites?

    - by kria
    I only have ipv6 connectivity via a HE tunnel on my router, so normally I want to prefer ipv4 over ipv6. For some websites however, I would like to prefer ipv6. Right now I have just set DisabledComponents to 0x20 and hard coded the ipv6 resolution into my hosts file for the sites i want to access over ipv6. Since these ip addresses change at times, this is not a good solution. Any ideas on how to handle this in a non-clunky way? Some kind of Chrome/Firefox add-on might do the trick, but I couldn't find one for this purpose.

    Read the article

  • Mac has IP address, can connect to router but can't connect outside

    - by partition
    Weird problem, my MacBook can't connect anywhere right now! The router works, it gets an IP, it can log into to the router but it can't resolve anything! The router works as I connected another device to it and it connected to the net. The MacBook doesn't have any strange DNS configurations either, just 192.168.1.1 for the router I even tried tethering it to my phone, and it still would not connect to the net... help?

    Read the article

  • Windows/global setting to allow only SSL when on public Wifi?

    - by hungry
    Rather than going through each of my apps and modifying settings, or tweaking individual browser settings (I use three different browsers) or just being careful not to type non-SSL URLs into the web address bar, is there a solution at the Windows level that will prevent anything from connecting to the web from my laptop unless it's using SSL? I also have mini apps installed like Gmail checker, etc that connect to the web of their own volition using my usernames, passwords and such, so it goes beyond just web browsers. The reason I'm asking is I want to work securely on the general Internet when on public Wifi (e.g. coffee shops) without a lot of hassle or having to remember everything that needs to be locked down. When I'm back home I want to go back to full access mode using any kind of protocol on the web. If a website doesn't support SSL when I'm out in public then I just don't surf it - that's not a worry to me.

    Read the article

  • Wired and Wireless Network Duplication

    - by Dave
    Howdy! Running into an issue when some of our client's have their laptop's connected via the wired ethernet network aswell as on the WLAN of the same network. There is know issues caused to the end clients.. BUT! Being a Managed Services Engineer i get pretty over the alerts that come through on our reports for machine's with the same hostname on the same network! We are not going to remove this monitoring because it does help a lot with detecting and stopping inferior users and things like that. So basically.. Question is, is there a way in Windows (third party programs welcome) to disable the wireless network when a wired network is connected and operational.. I know that Windows automticaly 'prefers' the wired network, however they are still both connected and therfore there is duplicate hostnames on the same network. Could also have stupid issues with DNS and things like that! Thanks!

    Read the article

  • curl makes a site work externally once run locally (apache)

    - by Kyle_at_NU
    Currently when I visit mysite.mydomain.com external to the local network I get in the browser: This is the default web page for this server. Nothing to see here. This is not even the "It Work's" Apache page. Then if locally (Apache2 on Ubuntu Server 12.04 with curl installed ) type: curl mysite.mydomain.com I get the site I expect. Then the next time i visit the page externally I get the correct site. Has anyone seen this before? Tips/Suggestions?

    Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >