Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 207/370 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • Iptables - forward email ports?

    - by Emmet Brown
    im trying to open some local ports (LAN) and then re-direct them to another server (WAN) using iptables. Here is my config: #WAN allow-hotplug eth1 auto eth1 iface eth1 inet static #Tarjeta red WAN address 192.168.2.2 gateway 192.168.2.1 netmask 255.255.255.0 #LAN allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.16.6 netmask 255.255.255.0 network 192.168.16.0 broadcast 192.168.16.255 I try this: iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 110 -j DNAT --to 200.40.30.218:110 iptables -A FORWARD -p tcp -i eth0 -o eth1 -d 200.40.30.218 --dport 110 -j ACCEPT iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j DNAT --to 200.40.30.218:25 iptables -A FORWARD -p tcp -i eth0 -o ethq -d 200.40.30.218 --dport 25 -j ACCEPT but, it did not work. i also try changeing eth0 to eth1 (and eth1 to eth0) but nothing happened. Starting Nmap 5.00 ( http://nmap.org ) at 2011-10-03 14:44 UYST Interesting ports on 192.168.16.6: Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 8080/tcp open http-proxy Im running debian. Can u guys help me to check what is happening? edit: IPTABLES-SAVE # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *mangle :PREROUTING ACCEPT [139993:77867651] :INPUT ACCEPT [139385:77761761] :FORWARD ACCEPT [186:12071] :OUTPUT ACCEPT [173556:74341650] :POSTROUTING ACCEPT [173734:74352988] COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *nat :PREROUTING ACCEPT [1649:190626] :POSTROUTING ACCEPT [6729:339646] :OUTPUT ACCEPT [6697:337660] -A PREROUTING -i eth0 -p tcp -m tcp --dport 110 -j DNAT --to-destination 200.40.30.218:110 -A PREROUTING -i eth0 -p tcp -m tcp --dport 25 -j DNAT --to-destination 200.40.30.218:25 COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *filter :INPUT ACCEPT [138307:77066136] :FORWARD ACCEPT [168:11207] :OUTPUT ACCEPT [172288:73655708] -A FORWARD -d 200.40.30.218/32 -i eth0 -o eth1 -p tcp -m tcp --dport 110 -j ACCEPT -A FORWARD -d 200.40.30.218/32 -i eth0 -o ethq -p tcp -m tcp --dport 25 -j ACCEPT COMMIT # Completed on Mon Oct 3 15:43:14 2011 Regards

    Read the article

  • IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

    - by NVRAM
    I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

    Read the article

  • Website ocasionally does not load on first click

    - by tfe
    Today I noticed that my website hosted on a virtual server ocasionally does not load on first click. I click on some link, browser starts loading page but nothing loads and does not not appear any error message (like "connection reset by peer etc). Nothing. When I click the same link again, page loads immediately. The same situation on 2 computers in different browsers. It happends not always, maybe on each 20... or 30 click. Sites from other servers load without this problem. Any ideas what can cause this problem?

    Read the article

  • Access MacZFS via network from XBMC

    - by AreusAstarte
    I have a ZFS RAID (zpool with three drives) hooked up to my Mac that I want to share in my LAN so that the XBMC client on my OUYA console hooked up to the television can read the drive and use it to stream my movies and television shows onto the television set. I've searched around for a bit but so far haven't found anything that helped me with it. I know that when connecting to the Mac with SSH I can't just access the drive due to different formatting. What do I have to do so that XBMC will be able to read it? How do I share it?

    Read the article

  • list and explanations of ways to boost this router's signal strength? [closed]

    - by barlop
    Possible Duplicates: Improve Wireless Signal How to get wireless coverage over my whole house? What's the best way to increase the range of my 802.11g router? The back of my house doesn't have WiFi Signal I'm interested in ways that are both specific to certain routers, and generic. When I say generic, I don't necessarily mean a one way that works for many.. but it can also be a generic answer, so mentioning solutions for different situations. So not just the one router I mention. Explanations are important, as well as all the ways. One i'm particularly interested in boosting the strength of is this wireless router/modem Netgear VMDG280 maybe anywhere in a big house with three floors, maybe from the garden.

    Read the article

  • Ubuntu Server on live Internet

    - by vaibhav
    I just installed Ubuntu Server 12.04 in an office machine with openSSH, DNS and LAMP Server. I also made the IP static and I can access the server in my office premises easily, but when I try to access my server from my home it is not working. I know I have to make some changes and need to install some firewall (I had just gone through with a couple of posts) but I guess an expert advise will save my time here.

    Read the article

  • Network connectivity issue

    - by kubiej21
    I am a novice cisco user and I am trying to investigate as to why one of our connections went down. We have a fiber network ring that is operating just fine. Connected to this ring via ethernet, is a lone 3560. This connection has worked flawlessly for the past year and a half. This morning, I noticed that I could not connect to that remote switch. I checked the configurations on both switches, and nothing has changed (as I expected). In the field, the port lights were flashing, indicating that some sort of communication is occurring. There is only 1 ethernet cable that has been run between these two locations, so testing an alternate path is not possible. What else can I do to fix this connection?

    Read the article

  • Network Performance issue

    - by qubemarker
    We have three Ubuntu 10.04 servers. One server is a storage server and the other two servers are configured as clients. The storage server has a good amount of capacity and it is integrated with windows Active directory server for Authentication. I am uploading some video files from both clients to the server and when I am uploading data from any one client alone I get about 26 MB/s data transfer rate. When I upload data from both the clients simultaneously I am only getting about 8 MB/s from each client. I have gigabit ethernet cards in all of the servers and a L2 Managed gigabit switch for connectivity. I don’t know why the data transfer rate is decreasing so much in simultaneous read and write. I have tried all of the TCP stack related settings suggested here. Can any assist with getting better read/write performance out of this setup? Any help is appreciated.

    Read the article

  • How can I ensure that my static ip address is read from /etc/network/interfaces rather than dhcp?

    - by jonderry
    This is a follow up to the following question. I'm trying to set a static IP by changing /etc/network/interfaces to the following: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.2.133 netmask 255.255.255.0 gateway 192.168.2.1 dns-nameservers 8.8.8.8 and then running /sbin/ifdown eth0; /sbin/ifup eth0. However, the change in IP address doesn't appear to take effect without editing /etc/dhcp/dhclient.conf and commenting out the following before running ifdown; ifup: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, dhcp6.name-servers, dhcp6.domain-search, netbios-name-servers, netbios-scope, interface-mtu, rfc3442-classless-static-routes, ntp-servers, dhcp6.fqdn, dhcp6.sntp-servers; Strangely, after commenting out this line, running ifdown; ifup works, but when I uncomment it, the behavior does not revert to the previous behavior of ignoring changes to my settings in /etc/network/interfaces (this doesn't seem like a problem, but I really need to be able to repeat this problem so that I can be confident that my solution is robust) Also, I'd rather not have to edit /etc/dhcp/dhclient.conf to change my static IP since it seems I should be able to do this by only editing interfaces. Can anyone explain the issues I'm seeing above and suggest the best way of making changes to static IP addresses take effect that admits reproducibility so that I can be sure that my approach works?

    Read the article

  • How can I stream my laptop's desktop to my iPad?

    - by Bane
    I recently got a wireless PC controller, and now I enjoy games playing from my bed. However, I find it hard to correctly place my laptop so it's comfortable, and it would be great if there was a way to view my screen through my iPad, with minimal lag; so I could simply leave my laptop behind me or on the desk and view the game from the iPad. Is this feasible/realistic? Additional info: Both the iPad and the laptop are on the same WiFi network

    Read the article

  • How to use OpenVPN through a restrictive firewall?

    - by R.L. Stine
    I'm currently in the situation of attempting to setup OpenVPN on a personal VPS, for connection primarily through an overly restrictive firewall. All of the setups mentioned below work when used through a reasonably-firewalled connection. I have tried: OpenVPN running on the standard port OpenVPN running on port 443 (I start OpenVPN manually from the command line on the VPS and see that the server reports the connection being closed almost immediately, I assume this is a result of DPI on the firewall) STunnel running on port 443 to access OpenVPN and evade DPI. This is the most successful and allows a connection and internet access through the VPN for ~10-20 seconds, before the connection is forcibly closed. Is there anything else I can attempt?

    Read the article

  • cannot using internet in VMWare

    - by user66247
    I am using VMware Workstation version 7 on Ubuntu 10.10. I installed Windows XP service pack 3 for guest os. Within VMWare, I am using bridge connection that I assigned static IP address to be able to ping host IP address but I cannot ping default router gateway. I also tried to command "/etc/init.d/vmware start" on terminal. All tasks are able to start successfully except "VM communication interface socket family" I am not sure that how to setup network for my VMWare by using wireless. Thanks in advance.

    Read the article

  • After creating a mysql user with all privileges, the user cannot create databases in phpMyAdmin and only sees information_schema table

    - by GHarping
    This is a recurring problem for some reason... Using mysql 5.5, I am simply trying to create a user that can connect to the database remotely, have access to all databases, and create databases. I have created a user using: create user 'dev'@'%' identified by 'abcdefg'; then granted all permissions using: GRANT ALL ON *.* to 'dev'@'192.168.%' IDENTIFIED BY 'abcdefg' WITH GRANT OPTION; and the result is that the user cannot create databases, and can only see information_schema database for some reason. Databases Create database: Documentation No Privileges Database Ascending information_schema Total: 1 Does anyone know why this might be happening?

    Read the article

  • Hardware recommendations for building an Ubuntu encrypted file server

    - by Robert Mashlan
    I would like to build a file server for my home network using Ubuntu. It will serve files from RAID1 configured disks, either in the OS or in hardware. It will be connected to a Gigabit ethernet LAN. The disks will use an encrypted file system. It will serve samba shares. I would like a recommendation on what kind of processing power/memory I would need to build a box that would be able to sustain the full capacity of the Gigabit ethernet connection in a file transfer for a single connection with the overhead of serving from an encrypted disk. I'm not looking to build a dream server, I just want enough processing capacity for high performance (and reliable) file sharing and spend as little as possible for it. This may be tangential, but what kind of hardware would I need to have a server be able to reliably go into a low power mode when no requests are being made of it?

    Read the article

  • Windows 7 Built-In VPN - How to access network shares, printers, etc.?

    - by mbrion
    After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

    Read the article

  • Wireless won't connect at home but works elsewhere

    - by Jenni
    My laptop connects via a wire into the modem fine and it works without any problems but it wont connect to it wirelessly, when I've taken it out places it connects fine in wifi area's! Also my son has his Wii connected wirelessly to it from his room upstairs without any problems, so I'm not sure where the problem lies, it hasn't worked since we got the modem it did on our old one and phoning Sky is just a waste of time they dont seem to know either and I just keep getting passed round departments repeating myself!

    Read the article

  • Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

    - by Gravy
    Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

    Read the article

  • Ubuntu reset network configuration

    - by user1103294
    When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

    Read the article

  • How do I set up a proxy server for home with bandwidth control, download limit options?

    - by Quakeboy
    3 room mates share a single 2 Mbps connection. Have a 40GB per month download limit beyond which speed drops to 256Kbps which is annoying. One of the roommates abuses the connection by downloading beyond his quota limit. I have a Netgear WNR1000v2 Wireless router + ADSL Modem to connect to the internet. We all access internet via Wireless router which connects to ADSL Modem. I need a free proxy solution which can help me set 40GB / 3 (13 GB) limit for each person (every person has 2 devices - a PC and a phone with Wifi) Uniform Bandwidth control - when 2 people browse the internet they should get 1 Mbps each, and when 3 people access, they should get 2Mbps divided by 3. After each person crosses their monthly download limit, they should be able to access the internet with 256Kbps speed only or lesser. Can I have a custom firmware on my wireless router do this (or) Do I need a proxy server ? Please point me to any relevant tutorials (for example with Squid).

    Read the article

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • Cisco ASA 5505 network route for static IP hosts

    - by TheCapn
    I've configured my internal VLAN using the most basic settings where ports 1-7 are assigned from a pool of addresses in the range 192.168.15.5 - 192.168.15.36. These hosts are given access to the internet and it works great. What I'm trying to set up now is allowing users who are connected to the device and specify their IP (say I connect and request 192.168.15.45) are given internet access and can still work alongside DHCP hosts. Those with a DHCP assigned address are blocked from the internet. Mostly the issue resides in that I am very new to working with the device. I feel that the solution is easy but I'm not looking in the right spots and don't have the correct terminology down to google it. Do I need to define access control lists? Group policies? a new VLAN? The rules that are set up seem to be specific to the entire /24 subnet but when I request a static IP outside of the DHCP range I get blocked from other hosts and the internet.

    Read the article

  • Configure server on network to analyze traffic

    - by Strajan Sebastian
    I have the following network: http://i.stack.imgur.com/rapkH.jpg I want to send all the traffic from the devices that connect to the 192.168.0.1 router to the 192.168.10.1 router(and eventually to the Internet), by passing through the server and an additional router. Almost 2 days have passed and I can't figure what is wrong. While searching on the Internet for some similar configuration I found some articles that are somehow related to my needs, but the proposed solutions don't seem to work for me. This is a similar article: iptables forwarding between two interface I done the following steps for the configuration process: Set static IP address 192.168.1.90 for the eth0 on the server from the 192.168.1.1 router Set static IP address 192.168.0.90 for the eth1 on the server from the 192.168.0.1 router Forwarded all the traffic from 192.168.0.1 router to the server on eth1 interface witch seems to be working. The router firmware has some option to redirect all the traffic from all the ports to a specified address. Added the following rules on the server(Only the following, there aren't any additional rules): iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT I also tried changing iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT into iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT but still is not working. After adding the following to enable the packet forwarding for the server that is running CentOS: echo 1 /proc/sys/net/ipv4/ip_forward sysctl -w net.ipv4.ip_forward = 1 After a server restart and extra an extra check to see that all the configuration from above are still available I tried to see again if I can ping from a computer connected to 192.168.0.1/24 LAN the router from 192.168.1.1 but it didn't worked. The server has tshark(console wireshark) installed and I found that while sending a ping from a computer connected to 192.168.0.1 router to 192.168.1.1 the 192.168.0.90(eth1) receives the ping but it doesn't forward it to the eth0 interface as the rule tells: iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT and don't now why this is happening. Questions: The iptables seem that don't work as I am expecting. Is there a need to add in the NAT table from iptables rules to redirect the traffic to the proper location, or is something else wrong with what I've done? I want to use tshark to view the traffic on the server because I think that is the best at doing this. Do you know something better that tshark to capture the traffic and maybe analyze it?

    Read the article

  • Windows Update broke Wirless driver - Can't get it working again

    - by private_meta
    I naively installed a driver update incoming from Windows Updates yesterday. That caused my Wifi on my Notebook (HP ELitebook 2740p) to break. The network is working as I tried it with my other mobile devices. When installing said driver, it told me that the installation failed. I tried to do a system restore, which did not help getting wifi connectivity back. The device said it was working, but did not get any wifi connection and did not discover any networks. What I tried next was to uninstall the device from my Device Manager and install either the current drivers found through windows, then I tried the same with the current drivers on the HP driver page. both of those attempts failed. It always tells me that installation failed when I uninstall and reinstall drivers. If I try to update the broken driver via internet, it tells me it is up to date, and in the device manager it still views as broken. Next, I 'played' around a bit and reinstalled drivers, and I managed to install drivers from 2012, and when trying to update drivers manually and picking drivers that match the device, it lets me choose between drivers from 2010 and 2014. 2014 would be the current one, picking the 2010 driver leads to the driver being accepted. However, no wireless network can be found. I'm pretty much out of ideas by now, short of reinstalling. The only option I can still think of was that the device broke at the exact moment I installed the new windows driver, but I find that a bit unlikely. Any help would be appreciated fixing this issue.

    Read the article

  • iptables, forward traffic for ip not active on the host itself

    - by gucki
    I have kvm guest which's netword card is conntected to the host using a tap device. The tap device is part of a bridge on the host together with eth0 so it can access the public network. So far everything works, the guest can access the public network and it can be accessed from the public network. Now the kvm process on the host provides a vnc server for the guest which listens on 127.0.0.1:5901 on the host. Is there any way to make this vnc server accessible by the ip address which the guest is using (ex. 192.168.0.249), without interrupting the guest from using the same ip (port 5901 is not used by the guest)? It should also work when the guest is not using any ip address at all. So basically I just want to fake IP xx is on the host and only answer/ forward traffic to port 5901 to the host itself. I tried using this NAT rule on the host, but it doesn't work. Ip forwarding is enabled at the host. iptables -t nat -A PREROUTING -p tcp --dst 192.168.0.249 --dport 5901 -j DNAT --to-destination 127.0.0.1:5901 I assume this is because the IP 192.168.0.249 is not not bound to any interfaces and so no ARP requests for it get answered and so no packets for this IP arrive at the host. How can make it work? :)

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >