Search Results

Search found 6545 results on 262 pages for 'usb hub'.

Page 210/262 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• How to prevent Windows from doing this

  - by Murtaza

  I am using Windows 7 Professional 64bit. This is my webcam. It is first time using this webcam in my pc. It's name is A4tech - PK-331F. When I plugged that webcam, windows start installing drivers automatically but unfortunately it installed wrong drivers. The drivers Windows 7 installed are Vimicro USB 2.0 PC Camera (Venus) and these drivers aren't related to this webcam. Now I did some modifications to windows so it isn't installing drivers automatically but whenever I plug that webcam but same name of drivers and doesn't install it. I think because of it, I can't install it's original drivers. I don't want Windows recognize this webcam with this name. How can I prevent Windows from doing this?.

  Read the article

• How do I make a backup of a live server?

  - by Jurily

  At my new job, I have a production server with the following qualities: Windows (XP I think), ancient hardware Absolutely vital database No backups whatsoever Everyone in the company has full admin rights, the passwords are stored in a .txt on the global share No installers, except for the OS The machine itself is sitting on a wooden shelf 5 feet above the ground against an external wall with frequent truck traffic on the other side; the shelf is already bent from the constant load Hasn't been rebooted in $DEITY knows how long, my predecessor wasn't even sure if it would survive it UPS is installed, but since everything is hooked up to it, it would last 10 minutes tops No spare parts or hardware budget How do I make a full backup with minimal impact on the server? I'm not sure how close it is to a total meltdown. For all I know, plugging in a USB stick could kill the company, and of course it will be all my fault, since "it was running fine before you touched it". The ideal solution would be a VM, so I have a test environment as well (separate of course).

  Read the article

• How to Create a shortcut to files / folders on a drive with different / changing letters (root)?

  - by Rolo

  I have seen this question asked and answered many times but the location one usually desires to create the shortcut is on the actual drive with the different letters. I would like to create the shortcut on the drive with the permanent letter. So, let me explain further. I have a C Drive and a G Drive. The C Drive is always C and it's on a Windows XP computer. The G drive may be G today, but H tomorrow. How can I create a permanently working shortcut on the C Drive that points to the G, sometimes H, external hard drive? P.S. I am referring to an external hard drive, but I would also (not instead) be interested in the answer if it were a usb flash drive. (Keep in mind the shortcut is being created on the drive with the permanent letter). Thanks.

  Read the article

• How can I automatically convert all source code files in a folder (recursively) to a single PDF with syntax highlighting?

  - by Bentley4

  I would like to convert source code of a few projects to one printable file to save on a usb and print out easily later. How can I do that? Edit First off I want to clarify that I only want to print the non-hidden files and directories(so no contents of .git e.g.). To get a list of all non-hidden files in non-hidden directories in the current directory you can run the find . -type f ! -regex ".*/\..*" ! -name ".*" command as seen as the answer in this thread. As suggested in that same thread I tried making a pdf file of the files by using the command find . -type f ! -regex ".*/\..*" ! -name ".*" ! -empty -print0 | xargs -0 a2ps -1 --delegate no -P pdf but unfortunately the resulting pdf file is a complete mess.

  Read the article

• Deploying a Windows 7 image, which way is the fastest?

  - by MatF

  I captured an image of a basic Windows 7 installation with some modifications using imagex. Before the image was captured, I ran sysprep generalizing and selecting to enter OOBE after it's done. Which way would be the fastest to deploy that image again? Using imagex /apply. Or naming the image install.wim and put it in the source folder of a normal installation (on a bootable USB device), running a normal setup afterwards. Currently I have only tried the second approach. However I just found out about the imagex way and wondered if it would be faster. Or are the even more methods that would be better?

  Read the article

• Symantec Backup exec 2012 for SBS - moving data to offsite drives

  - by Will Lennard

  Can anyone advise how best to run the following strategy, or even if it is possible/sensible strategy? I am looking to backup an SBS server using BE2012 where the data is backed up on a weekly full backup, with subsequent daily incrementals till the end of the week, a fresh full backup will then be taken the next weekend, and the cycle repeats for 4 weeks, thus 4 full backups with incrementals. This months worth of backups will then be moved off to an offsite store via USB drive for safe keeping. Is this viable, sensible, or am i just a bit crazy? All ideas are welcome.

  Read the article

• How to change the terminal to SCO compliant in Ubuntu

  - by kaushik

  I have a server in which SCO 5.x is installed. I have several thin clients which were supplied from our head office. Those thin clients have linux pre-installed in them. When we tried to connect to our SCO server, we have found out that the thin client does not support SCO terminal type. So the program (Which is written in Oracle forms) is not working correctly. Lots of function keys stopped working and screen also not getting refreshed correctly. Hence we decided to use Ubuntu Live USB keys in thin clients. Now the problem is how can we change the terminal type to SCO in ubuntu ? Means I want it in the text terminal (Alt+Ctrl+F1,F2...) (Not in xterm...graphical terminal emulators). Does ubuntu support SCO terminal type ?

  Read the article

• Multiple SMTP servers in Thunderbird3

  - by ldigas

  Situation: 2 mail accounts - each with its own pop3 and smtp servers, accesed normally. Except, when using Vodafone mobile network (you know, those usb or pcmcia cards ...) in which case mails are send using Vodafone's SMTP server. I configured both accounts in thunderbird for their default servers, and then added under multiple identities, another called Name of User (mobile) for each account. And it works. Except, I don't like the fact that when I send mail using mobile smtp server it sends them under Name of User (mobile) <-- the mobile part being important. I could of course, delete that part, but then when sending mail, I'd have no way of differenting between the two. They'd both look as Name of User email@address_of_user.com. So, what would be the easiest way to solve this ? It is not a major problem, but it is annoying.

  Read the article

• HP Deskjet 3600: Offline and won't stop blinking and won't print.

  - by George Bailey

  Using Vista and an HP Deskjet 3600 on USB connection Normally when I unplug the printer, I open the printer queue and in the title bar it says "HP Deskjet 3600 - Use Printer Offline" then the offline message will go away and it will start printing. But for some reason, the bower button light is continually blinking. (this is the only light on the machine). The printer queue says "HP Deskjet 3600 - Offline" and when I unplug it it says "HP Deskjet 3600 - Offline - Use Printer Offline". I have tried unplugging it for a few hours, also tried turning it off for a few hours. Does anybody know what the single word Offline means? Does anybody know how I can clear out the memory in the Printer? (this is my guess as to what is causing the problem)

  Read the article

• windows 2003 - why can't serial port be accessed remotely?

  - by Danny Staple

  we have recently installed the updates on some of our servers, which have a bit of hardware attached via USB that presents itself as a serial (COM) port. The strange behaviour is that if I start a cmd shell on the server via VNC, I can open the serial port. If I run a service and start it from there (telnet, jenkins) then I receive a "not found" error for it. IE: C:\Documents and Settings\some_user>echo 1 >COM4: C:\Documents and Settings\some_user> on the local cmd will work, and on the remote telnet will give: C:\Documents and Settings\some_user>echo 1 >COM4: The system cannot find the file specified. C:\Documents and Settings\some_user> I cannot see any security settings on the Device manager settings panel for this device.

  Read the article

• openSuse full disk encryption

  - by djechelon

  I'm a proud Suser. I'm about to reinstall 12.2 on my ASUS N76VZ (UEFI x64 laptop). Since I'm very sensitive about laptop security against theft or unwanted inspection, I chose to use BitLocker with USB dongle in Windows 7. When installing Suse the last time I found that only the home partition (separated from root) was capable of being encrypted. Does Suse offer a full disk encryption solution like BitLocker that I haven't discovered yet? Or is encrypting home partition the only way to protect data? Encrypting only home is feasible as one stores personal data in home, but I still would like to encrypt the whole thing! Also, using a hardware token (no TPM available) for unlocking is preferred to password, if possible! Thanks

  Read the article

• How to distill / rasterize a PDF in Linux

  - by Sampo

  We have a printer at our office that prints PDF files from a USB stick. It prints most files okay, but it has problems with some, especially ones generated with Latex. Some PDFs it simply refuses to print, some PDFs it prints with courier-type font, and some it prints fine except for equations. I'm looking for a way to "distill" PDFs into a dead-sure format to print. Either by simplifying / normalizing the PDF to the point that any renderer will render it correctly, or by simply making each page a 600dpi raster image in the PDF. (I could split the PDF into individual raster images and combine them manually, but I want something scriptable.) The output file size doesn't matter, as long as it's sure to print, has A4 paper size (or the original) and 300~600dpi resolution.

  Read the article

• Mac failing (failed?) hard drive - is all hope lost?

  - by Daniel

  It's a 500 GB Seagate laptop hard drive that came with my Macbook Pro. Apple partition format. Already replaced and now have it external, connected via SATA/USB adapter. Trying to get just a few files that I worked on while out of town when it crashed (and thus did not have my time machine backup drive). Drive will not mount, but OS X Disk Utility detects it and can read the capacity, model number, and even the name of the partition, which leads me to believe all hope may not be lost. Failed attempts so far: Disk Utility verify+repair says drive cannot be repaired and that I should back up immediately (lovely) Disk Warrior says it cannot rebuild the directory due to hardware failure Data Rescue quick & deep scans immediately failed PhotoRec says "error reading sector" for every sector (at least for the few minutes I let it run before closing it to explore other options) What else can I try here? Again, I'm just looking for a few, small files (python scripts to be specific) - not a full recovery.

  Read the article

• Choosing a Linux distribution

  - by Luke Puplett

  Dangerous territory with this question so please try to be impartial and instead focus on what to look for when choosing a Linux distribution. I'm completely new to Linux. I thought it'd never happen but I need to have a Linux box to play with and I have a spare fanless Atom PC (32-bit only). I'll be using the machine as a non-commercial hobby server, the trouble is, I don't even know how to compare Linux distributions and why people pick one over another. If anything, I want to have an easy install from USB stick. My question is: what do you look for when choosing a (free?) Linux distribution for a server? If you can, please explain what sorts of things actually differ between one and another without saying which you think is better, just the facts. The way I see it, Linux as a server is just an SSH console and I find it hard to imagine what could be different between one and another.

  Read the article

• Text on Cisco ASA console is garbled/missing letters

  - by Some Linux Nerd

  I've actually looked up a number of solutions for this problem and none of them work. There's this Cisco ASA 5505 that I'd like to use, that outputs mildly garbled text with missing characters. I did some googling and found that the most likely problem is a bad baud rate, so I tried all the baud rates, 7N1, 8N2... basically every possibility minicom had. Then I figured (since I can type ok, just not read) that if I factory reset it that it would fix whatever is set wrong with the terminal. That didn't work either. This usb-db9 adapter and console cable work fine on the catalyst switch in our office. My serial settings are 9600 8N1 with no flow control. Anyone know how to fix this? I have an example of the text on pastebin: http://pastebin.com/MAJF0mVU - it's just lots of "Dfaut cnfiuraionfil cotais 1enty." instead of "Default configuration blah blah"

  Read the article

• What are the Windows G: through Z: drives used for?

  - by Tom Wijsman

  In Windows you have a C: drive. The first things labeled beyond that seems to be extra stuff. So my DVD drive is D: and if you put in a USB stick it becomes F:. And then some people also have A: and B:. But then, what and where are G: through Z: drives for? Is it possible to connect so many things to a computer to make them all in use? Or more than them? Would it give a BSOD? Or would this slow down the system somehow? Or what would happen? What if I want to connect even more drives to the computer? Because with the hard drive limits it's more efficient to buy more drives than to buy a single drive with a lot of capacity. Is it possible to create drive letters like 0: through Z: or AA: through ZZ:?

  Read the article

• anonymous access to ftpd

  - by gcb

  I need FTP on my local LAN so my scanner can send me scans. I am on Debian sid. I installed ftpd and created the user anonymous. I removed anonymous from /etc/ftpusers When I try to login as anonymous it says: login failed. I can't seem to find any log file. I'm using FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) update:I needed that so my printer had one place to store my scanned documents on the LAN. solved that buying a dedicated USB pen drive (thankfully I bought a printer one with plenty of options) but in the past this was a very simple task. Install ftpd, specify the directory for anonymous access, and be done with it. now every ftp daemon has several layers of security and chroot in it's core... this is just crazy when all you need a place for a printer to dump files in a secured network.

  Read the article

• Lync client configured as room

  - by captainmish

  We have a few usb cameras in meeting rooms that people can plug their laptops into, which works ok, but we're looking for better... Probably a long shot, but does anyone know of a way to have something like a "common area" client, where a PC connected to a webcam and speakers/mic can become a bookable resource, dragged in to conversations and automatically show video? A workflow I imagine: User books a room with "special" lync client as attendee Meeting time comes, they go to the room and fire up lync on their pc "special" lync client automatically (or is dragged in) joins and starts video, local attendees use audio and video from the special client Any tips welcome!

  Read the article

• printing in linux

  - by Neilvert Noval

  Hello all. I've been a linux user for quite some time. But haven't do printing until now. I just wanna ask how to do printing in linux? I have researched a bit on it. I found some $> echo "print me" > /dev/lp0, but unfortunately, I have no lp0 in my /dev. I don't know if this is the right thing to do. Nevertheless, please tell me of ways on how I can print from my linux box. Here are some details: OS: debian linux 5.0.4 printer: disclosed until it is necessary connection: usb connection So do i need to add a printer first? From the printer manual that I read, this printer model has no linux driver.

  Read the article

• What could be wrong with my CD drive and how do you fix it?

  - by Jamie

  My CD drive hasn't worked in about 8 months. I was burning CDs in a hurry and pulled it out because it was taking too long (probably an average amount of time). Im running a laptop (Toshiba Satellite A505-6965) that uses a slot drive. Now my computer doesn't accept CDs. It used to pull them in but it doesn't anymore. Ive heard it make odd noises a few times but thats it. The slot is these spongey things and Ive managed to peek into the drive with a flashlight and theres nothing in the way, really. Could someone explain the mechanics of what happened and if it would be possible to fix it? If itd be possible to fix it through Linux that would be great since I keep getting the BSOD (0x0000007B) and am going to try reinstalling Windows 7. But I can't really do that since I don't have a USB drive larger than 2 GB (Windows is about 4 GB) so Im relying on Linux ATM.

  Read the article

• Dell 2155cdn Multifuntion Printer

  - by Wayne-Z

  Hey guys. So after a prolonged period, (overnight) i lose the ability to initiate a scan directly from the unit. I'll initiate a job and after awhile, it times out and beeps. However, when i go to the PC and initiate a scan from there, the scan job goes through just fine, and i can then initiate scans directly from the unit all day. Until a prolonged period (overnight). Then i have to do the process again. Ive made sure all powersave settings were off.. The PC doesnt go to sleep or a powersave state. Any insight into this will be appreciated. Pertinent Info: - Unit: Dell 2155cdn Multifunction - Connected via USB - PC: Dell Optiplex 755

  Read the article

• I have a wireless Canon P560 and my computer can't find it

  - by ed

  The printer is wireless and I haven't connected it via USB. I set the configurations for the Wi-Fi access point in the printer and it connected to my Wi-Fi. I have AT&T as the service provider and the 2Wire router. When I access the router in the browser I see that the printer is connected but when I run the software to detect the printer the computer can't find it. I have a Mac with Snow Leopard. I tried to detect the printer with another device and it can't find it. Is there a port that needs to be open for wireless printers? Because I tried putting the routers firewall settings for the device to its lowest and the computer still can't find it. Let me know. Thnx.

  Read the article

• Is there a way to backup all my files and replace with 0-byte files with same name?

  - by laggingreflex

  My main drive on laptop keeps filling up so I take a backup on a USB and delete the original files. But then I find myself getting (downloading or getting from someone else) files that I already have backed-up but couldn't recall at the moment. So is there a way I can keep a 0-byte file with the same name as teh backed-up copy so that when I'm asked whether to overwrite the existing file, I can easily choose no knowing I probably have this file already in the backup. EDIT: better yet, replace with a shortcut(.lnk) on the external drive so I can access the files hassle free and not get any errors because of 0-byte files being accidentally opened.

  Read the article

• Accidentally deleted the software for MyPassport Essential SE 1TB Hardrive

  - by user26192

  I'm posting for a friend of mine. She bought a WD MyPassport Essential SE 1 TB Hard drive the other day. When she plugged in the USB in her lap top, the driver cannot be recognized by the smart ware software. While she was doing a back up of her files, McAfee was running in the background. Since the backup was taking so long to finish, she decided to pause it. She tried to delete the partially backed up files, but instead, she accidentally deleted the entire file in the folder including the pre-installed software. Now, when she tries to start up the MyPassport, the smart ware doesn't show up anymore. Can someone please give us advice what can she do about this? Thank you.

  Read the article

• Material to use for computer system cover against UV and salty air?

  - by hippietrail

  I live right next to the sea and have a large window quite close to my computer setup which allows a lot of indirect sunlight to enter. I'd like to buy or make a cover for my computer system. From visiting my usual mom & pop computer shop yesterday I got the impression these might not really exist any more. If I make my own I need a material with these qualities: Block or reduce ultraviolet light which can depolymerize plastics (the sun here in Australia is much stronger than in the northern hemisphere). Block salt-laden sea air which can oxidize USB and other connectors. Not cause static electricity when covering or uncovering. Keep dust off of course (-: My setup is a laptop plugged into a wide-screen LCD with a few external drives. So I think I'd want a largish sheet to flop over the whole desk. Are such covers commonly sold these days? What material(s) should I look for which provides the listed attributes?

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >