Search Results

Search found 7850 results on 314 pages for 'except'.

Page 213/314 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• Is it possible to command a common router without using the web interface?

  - by MDeSchaepmeester

  Some background The internet arrangement in my student home is really weird. There is one ethernet outlet and several wifi hotspots. Either way requires a login through a web site to get internet access. This is annoying as each device needs to login seperately and with a PS3 for example, it is impossible to get connected at all since the web login procedure doesn't work. Therefore I have installed a D-Link DIR-635 router which is connected to the ethernet outlet. It has DHCP enabled so it uses NAT, but whatever it is connected to also uses NAT and I've read this should not work. A fellow student tried it with an Apple Airport but that keeps giving errors related to NAT after NAT. Anyway my setup does work so bonus points if you can clarify this. I need to login to the web site I mentioned earlier with any device, after which all devices in my LAN have connectivity. This is great. Except... In short From time to time, I lose internet connectivity and my D-Link DIR-635 router needs to do a DHCP renew. I can do this via the web interface but my life would be easier if I could just run a cmd file which tells my router to do this without all the hassle. This would setup a connection to my router and execute the proper command. I have tried googling but couldn't find much helpful stuff.

  Read the article

• How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

  - by John

  I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

  Read the article

• lighttpd domains and url matching

  - by Manuel

  I'm trying to configure lighttpd so that: www.domain1.org/admin uses config1 any other URL on www.domain1.org uses config2 any url on www.domain2.org uses config2 So basically, domain1 and domain2 should use the same configuration except for when domain1 is accessed via an URL that starts with /admin I tried so far a number of variations, including this one: $HTTP["host"] =~ "domain1.org" { $HTTP["url"] =~ "^/admin" { // config1 alias.url = ("/media/admin" => "/usr/share...", "/static" => "/var/www/...") url.rewrite-once = ( "^(/media/admin.*)$" => "$1", "^(/static.*)$" => "$1", "^/favicon\.ico$" => "/media/favicon.ico", "^(/.*)$" => "/application.fcgi$1", ) server.document-root="/var/www/application" fastcgi.debug = 1 fastcgi.server = ( "/application.fcgi" => ( "main" => ( "socket" => "/var/www/application/application.sock", "check-local" => "disable", ) ), ) } else $HTTP["url"] !~ "^/admin" { // config2 } $HTTP["host"] !~ "domain1.org" { // config2 } But no matter what, accessing domain1.org/admin yields a 404. Is there anything that I am missing?

  Read the article

• UNC shared path not accessible though necessary permissions are set

  - by Vysakh

  I have 2 environments A and B. A is an original environment whereas B is a clone of A, exactly except AD servers. AD server of B has been assigned a trust relationship with A, so that all the service and user accounts of A can be used in B too. And trusting works fine, perfect!! But I encounter some issues accessing UNC paths(\server2\shared) with these service accounts. I had a check in A environment and all the permissions set in that environment is done in B too (already set since it is a clone of A),but the issue is with B environment only. And FYI, the user is an owner of that folder in both the environments. I tried creating a folder inside the share(\server2\shared) using command prompt, but failed with error "access denied". What I done a workaround is that I added that user in "security" tab of folder permissions and after that it worked fine. But this was not done in the original environment. Is this something related to trust relationship? Why the share to the same location for the same user works differently in 2 environments, though they've been set with the same permissions. FYI, these are windows 2003 servers. Can someone please help.

  Read the article

• Can not connect remotely to MySQL Server on Ubuntu 10.10

  - by BobFranz

  Ok I have searched google for two days trying to get this to work. Here are the steps I have taken so far: Clean install of Ubuntu 10.10 Install mysql 5.1 as well as admin Comment out the bind address in the config file Create a new database Create a new user that is username@% to allow remote connections Grant all access to this user to the new database EXCEPT the grant option Login on the server is ok using this new user and database on the localhost Login on the server is ok using this new user and database on the server internal network ip Login from a remote computer is ok using this new user and database using the internal network ip Login is not working when logging in with this username and database using the external ip address from the server or the remote computer. I have port forwarding enabled for this port and it is viewable from outside as confirmed by canyouseeme.org I have nmap'd using the following command on the internal ip and get the below result: nmap -PN -p 3306 192.168.1.73 Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:41 PST Nmap scan report for computername-System-Name (192.168.1.73) Host is up (0.00064s latency). PORT STATE SERVICE 3306/tcp open mysql Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds I have nmap'd using the following command on the internal ip and get the below result(I have hidden ip for obvious reasons): nmap -PN -p 3306 xxx.xxx.xx.xxx Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:42 PST Nmap scan report for HOSTNAME (xxx.xxx.xx.xxx) Host is up (0.00056s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 0.21 seconds I am completely stuck here and need some help. I have tried everything under the moon and still can not connect from a remote external ip address. Any help is greatly appreciated and I need to do anything to help find the problem let me know and I will post the results here.

  Read the article

• Clean installation of RHEL 5.5 claims package "desktops" is missing

  - by TKguru42

  Hi all, I'm a student worker in the CS department of my university, so please forgive me for any unprofessional descriptions. Simplified explanations are appreciated. I recently replaced some bad graphics cards in a few public workstations. The machines are all the same model. Before putting them back on the network I did fresh installs of RHEL---first I tried 5.4, but yum update ran into all sorts of ugly dependency errors and if I tried to remove any of the problematic packages, the whole operating system FUBAR'd. Using RHEL 5.5 gave me the same errors during install saying that "java.1.5.1-sun*" and "desktops" were missing, but yum update didn't have any dependency problems. Now that I tried logging in through the GUI, I encounter no GUI past the standard RHEL login page. The desktop is a uniform light teal and there's no system tray. An xclock window and an xterm window are open, and Firefox opens automatically, but that's it. Nothing else. What's REALLY confusing is that the computer claims that gnome is already installed, except it clearly isn't working. Any help or advice is greatly appreciated. If it helps, our department uses kickstart to run our standard Linux installs. I can try to get the script if that would be of use. Thank you!

  Read the article

• How to securely connect to multiple different LDAPS servers (Debian)

  - by Pickle

  I'm trying to connect to multiple different LDAPS servers. A lot of the documentation I've seen recommends setting TLS_REQCERT never, but that strikes me as horribly unsecure to not verify the certificate. So I've set that to demand. All the documentation I've seen says I need to update ldap.conf with a TLS_CACERT directive pointing to a .pem file. I've got that .pem file set up with the certificate from LDAP Server #1, and ldaps connections are happening fine. I've now got to communicate securely with another LDAP server in another branch of my organization, that uses a different certificate. I've seen no documentation on how to do this, except 1 page that says I can simply put multiple (not chained) certificates in the same .pem file. I've done this and everything is working hunky dorey. However, when I told a colleague what I did, he sounded like the sky was falling - putting 2 non-chained certificates into one .pem file is apparently the worst thing since ... ever. Is there a more acceptable way to do this? Or is this the only accepted way?

  Read the article

• Touchpad scroll slow and jumpy

  - by IR

  I have a laptop with a synaptics touchpad running on win7 x64. When i use the scrolling region of the touchpad in some applications, for example in Visual Studio 2008, Notepad and Windows Media Player 12, the scroll is very slow. If i pull the edge of the touchpad slowly the program will scroll one row at a time(regardless of the number of lines-settings in the mouse configuration). If i pull the edge quickly though, the program will instantly jump like 20 rows making it way too fast. In some applications, like Firefox, the scrolling work as expected. Changing the scrollspeed-setting for the touchpad does not help. If you make it slower it doesn't do the 20-row jump but then it's horribly slow and if you try to make it faster it will do the jumps all the time. I have tried both synaptics generic drivers and the "special" drivers that HP provides but they both have the same problem (except that the generic one can't adjust the scrolling speed, even though that didn't help anyway). With windows generic drivers the scrolling region doesn't even work. Other mice i've tried with scrollwheel work as they should do.

  Read the article

• Can't get 1440x900 resolution with GRUB2 although vbeinfo says it's available

  - by TomSW

  I'm trying to use GRUB2 in graphical mode with 1440x900 resolution, but the result is always garbled nonsense: the highest resolution I can get is 1280x800. Word is from googling that long as vbeinfo lists a resolution, GRUB2 can use it. This doesn't seem to be true: vbeinfo says that 1440x900 is available but it doesn't work. Testing it from the GRUB2 command line: set gxfmode=1440x900 terminal_output gfxterm # -> garbled nonsense # back to trusty 640x480 terminal_output console The graphics card is an Intel GM965. Once linux boots the framebuffer switches to 1440x900. Added after epheminent's reply and various experiments vbeinfo lists two sets of modes. The first set runs from 0x160 to 0x16b, with resolutions 768x480, 960x600, 1280x800 and 1440x900 Then - after a bunch of text-only modes - the second set, containing resolutions 1024x768, 800x600, and 640x480 The first set of modes aren't altered by 915resolution. They all work except 1440x900. The resolution of modes in the second set can be altered using the 915resolution module / command available in GRUB2 = 1.99. # in /boot/grub/grub.cfg insmod 915resolution # 30, 32, 34 all work for me: all that varies is which modes are altered 915resolution 30 1440 900 # setting an impossible resolution changes the mode to "text-only" # in my case 1280x1024 is not supported 915resolution 30 1280 1024 Clearly, 1440x900 should just work: adding it with 915resolution is just a workaround.

  Read the article

• Windows XP Freezes

  - by Jim Fell

  Hello. I'm running a machine with Windows XP Professional 64-bit. Every so often, it will freeze for no apparent reason. That is, everything stops responding, except the mouse. I can move the mouse around, but I can't click on anything. Keyboard input is also not accepted/received when this problem occurs. The three-finger salute fails to bring up the Task Manager. Even pressing the power button on my computer fails to shut it down. The only way out of this that I have found is to hard-reboot the machine (i.e. pull power or hold power button in for 10 seconds). This problem was occurring on the system when it had all its updates and after a fresh install when not everthing was quite yet updated. I've run the Scandisk utility and the latest version Memtest86 that supports 64-bit architecture; neither found any errors. The last time this happened was on a fresh install of Windows. Only Nero Essentials, Avast antivirus (disabled), Firefox, and Spybot were installed. I was not running Nero, Firefox, or Spybot at the time, and Avast was disabled, so I'm pretty certain this is a Windows issue. Is anybody familiar with this problem or have any pointers? Thanks.

  Read the article

• Autossh startup on Ubuntu 10.04 - fails after powering off

  - by grant

  I'm using upstart to keep a reverse ssh tunnel alive using auto ssh similar to Using Upstart to Manage AutoSSH Reverse Tunnel. This works fine, except after a manual power down I can no longer connect to the machine through the "central server" using the tunnel. I receive "ssh_exchange_identification: Connection closed by remote host". The autossh process is running on the client. I can connect again after re-starting networking. I'm trying to figure out why this is failing consistently after a manual shutdown. Is it possible that I need to do some cleanup on startup that would allow the tunnel to work in this situation, or are there some other debugging/troubleshooting steps I can take to determine the problem? Machine A is the client machine, using autossh. This machine sits behind a firewall and uses the following command in upstart to create an ssh tunnel: /usr/bin/autossh -fN -i /keyfile -o StrictHostKeyChecking=no -R 20098:localhost:22 user@centralserver Machine B we'll call the "central server", which sits in the cloud and is the host. This machine is "centralserver" in the command above. When Machine A is hard powered off, and back on, I cannot connect to it by SSH'ing from my machine (C) to Machine B in the cloud, then using the following command to get to Machine A: ssh -p 2098 user@localhost Again, after a reboot of the client (A), this works fine. It is only after a hard power down that the problem occurs. There are autossh processes that are running on the client machine (A) after powering down and back up, but they just don't seem to doing their job.

  Read the article

• Install Peppermint OS three on Asus EeePC

  - by Kithoth

  I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by user57019

  I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• Apache on CentOS 5.9 VM serves my optimized images corrupted (but my Mac doesn't)

  - by Robert K

  I'm using a Vagrant VM to mirror the client's environment as closely as I can. As part of our build process we do no optimization of assets early on; that comes as we're ready to take a site live. Needless to say, this issue is beginning to worry me as we need to take the site live very soon. I use ImageOptim to automate optimization of image assets, which runs a whole series of tools (Zopfli, PNGOUT, OptiPNG, AdvPNG, PNGCrush). I always set the optimizations to their maximum setting. After optimization, my PNGs start looking like this: What's weird is, if I serve the same file through my Mac's copy of Apache, not through Vagrant, the image loads fine. In fact, the only time it's ever corrupt like this is when the image is served from the Vagrant VM and its install of Drupal. All optimized JPEGs display only the first ~20% of the image. And PNGs, depending on the image, may show either a portion or the "progressive"-style corruption below. The browser itself makes no difference, the same browser will serve an uncorrupted image from my Mac's Apache instance and a corrupt image from the VM. When I disable all PNG optimizations except PNGCrush, and the removal of the PNG metadata, the image is served corrupted. I'm optimizing JPEG images with JPEGmini. The server is running CentOS 5.9, Apache 2.2.3-85, PHP 5.3.3, and Drupal 7. As best as I can tell the error lies somewhere within the VM, either with Apache or with (perhaps) the network stack. Seems like the tools that optimize the compression of the PNGs and JPEGs are what trigger this error. I've already determined that the .htaccess file isn't interfering with how the images load. What should I try to troubleshoot this?

  Read the article

• Vim move cursor one character in insert mode without arrow keys

  - by bolov

  This might seem a little too overboard, but I switched to vim and I so happy about the workflow now. I try to discipline myself not to use the arrow keys, as keeping the hands on the alfa-keys all the time is such a big thing when writing. So when I need to navigate I get out of insert mode, move in normal mode and get back in insert mode. There is an exception where this is actually more disrupting: I use clang complete with snippets and super tab which is great. Except every time I get a function auto completed after I fill in the parameters I am left with the cursor before ) so to continue I have to move the cursor one character to the right. As you can imagine this happens very often. The only options I have (as far as I know) are : Escla or ?, and I am not happy about neither of them. The first one makes me hit 3 keys for just a simple 1 character cursor move, the second one makes me move my hand to the arrow keys. A third option would be to map CTRL-L or smth to ?. So what is the best way of doing this? //snippets (clang complete + supertab): foo($`param1`, $`param2`) //after completion: foo(var1, var2|) ^ ^ | | I am here | Need to be here | denotes cursor position

  Read the article

• Have some questions about setting up a VPN to my private cloud servers

  - by Pure.Krome

  I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

  Read the article

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• Getting Run time 1004 error in code

  - by krishna123

  I tried the code provided by vba express for combining sheet, while execution it is displaying Run Time error 1004: Application Defined or Object Defined Error: My Scenario is: I have a Excel, in that I have first sheet "Connection" and after it I have Sheet1, Sheet2 and so on. I am combining all sheets except Sheet"Conection" by saying start with sheet2. I tried following line of code to exclude "Connection" sheet: If Not Sheet.Name = "Connection" then but it did not work. Whatever the sheets I have in some of them I have large data in some cells. Here is the code which I am using: I have highlighted the line Sub CopyFromWorksheets() Dim wrk As Workbook 'Workbook object - Always good to work with object variables Dim sht As Worksheet 'Object for handling worksheets in loop Dim trg As Worksheet 'Master Worksheet Dim rng As Range 'Range object Dim colCount As Integer 'Column count in tables in the worksheets Set wrk = ActiveWorkbook 'Working in active workbook For Each sht In wrk.Worksheets If sht.Name = "Master" Then sht.Delete Exit Sub End If Next sht 'We don't want screen updating Application.ScreenUpdating = False 'trg.SaveAs "C:\temp\CPReport1.xls" 'Add new worksheet as the last worksheet Set trg = wrk.Worksheets.Add(After:=wrk.Worksheets(wrk.Worksheets.Count)) 'Rename the new worksheet trg.Name = "Master" 'Get column headers from the first worksheet 'Column count first Set sht = wrk.Worksheets(2) colCount = sht.Cells(1, 255).End(xlToLeft).Column 'Now retrieve headers, no copy&paste needed With trg.Cells(1, 1).Resize(1, colCount) .Value = sht.Cells(1, 1).Resize(1, colCount).Value 'Set font as bold .Font.Bold = True End With trg.SaveAs "C:\temp\CPReport1.xls" 'We can start loop 'Skip Sheet - Connection If Not sht.Name = "Connection" Then For Each sht In wrk.Worksheets 'If worksheet in loop is the last one, stop execution (it is Master worksheet) If sht.Index = wrk.Worksheets.Count Then Exit For End If 'Data range in worksheet - starts from second row as first rows are the header rows in all worksheets Set rng = sht.Range(sht.Cells(2, 1), sht.Cells(65536, 1).End(xlUp).Resize(, colCount)) 'Put data into the Master worksheet '----------------- Error in below line -------------------------------------------------- trg.Cells(65536, 1).End(xlUp).Offset(1).Resize(rng.Rows.Count, rng.Columns.Count).Value = rng.Value '---------------------------------------------------------------------------------------- Next sht End If 'Fit the columns in Master worksheet trg.Columns.AutoFit 'Dim dest, destyfile 'dest = "E:\Test_Merge\" 'destyfile = dest & "_" & trg.Name 'trg.SaveAs (destyfile) 'Screen updating should be activated Application.ScreenUpdating = True End Sub

  Read the article

• Multiple Screen - Keyboard Sharing

  - by nhbdesign

  I run a small architectural firm with several drafters employed, I'm currently setting up a new office space and one of the things on top of my list is a figuring out a way to keep tabs on my drafters work and being able to collaborate in real time. Here's the challenge, they sit in a separate large cubicle room and I'm on the other end of the hallway, the way it is now; every time they’ve got some question on how to proceed on a certain design, they would come all the way to my office, I'd open their file (in read only) give some ideas, save-as new file, they go back copy paste... in short, nonsense. What I've been thinking of is to setup a hardwired solution that should enable me to have an extra monitor on my desktop which is hardwired (through KVM or something) to each of my employees workstations serving as a secondary display, so that I can watch live what they do, interact with them just as if they would have an extra keyboard and monitor in my office, except; I don’t want to have on my desk a separate monitor for each employee.. so I'd want them to be tiled on a single large screen, watching all screens alive, and whenever they ask me (or I just decide..) to step in, I just click on any tile and hurray, I'm in, editing and saving in real time on their workstation. I also want to reserve the option when I want to, to just use that monitor as just an extra screen for my workstation. Is something like that possible in 2013? P.S. I know of TeamViewer and similar internet/software based stuff, but I'm specifically looking for something solid hardwired and maintenance free, and also something that would allow to watch without my employees getting notified every time I do so (I’m not a tough boss though...).

  Read the article

• Allied Telesis router: IP filtering for the LOCAL interface

  - by syneticon-dj

  Given an Allied Telesis router with an AlliedWare OS (2.9.1) I would like to disable access to all management services of the router except for a number of subnets (or alternatively have what is a "management VLAN" with other manufacturers' switch and router models). What I have tried so far: creating a new VLAN and an appropriate IP interface, setting the LOCAL IP into this subnet, creating an IP filter for the IP interface and specifying my exclusion subnets: it simply does not work as intended as I can access the LOCAL IP set from any of the other VLAN interfaces - the traffic is apparently not going through my defined filter set at all creating a new IP filter set and binding it to the LOCAL IP interface: this seems not to affect any kind of traffic at all, the counters for the filter set remain at zero packets setting the Remote Security Officer Level IP address range: this only restricts the ability for a user with the Security Officer privilege level to log in from any but the specified address ranges / subnets. Unfortunately, it does not prevent service availability (and thus DoS capacity) or the ability to log in as a less privileged user (e.g. a "manager") calling technical support: unfortunately no solution so far What I have not tried: creating a filter set for each and every IP interface defined on the router and excluding access to the router's management IP: I would like to reduce the overhead induced by IP filters as the router already is CPU-constrained at times. Setting up filters for every IP interface would mean that each and every traffic packet would have to pass the filters, thus consuming CPU cycles. If by any means possible, I would like to find a different solution.

  Read the article

• How to make lighttpd respect X-Forwarded-Proto when constructing redirects for directories?

  - by Tim Landscheidt

  We have an nginx proxy at tools.wmflabs.org that receives requests by http and https and passes them by http on to lighttpds on a grid (one lighttpd per top-level path). Requests that reach the proxy by https are received by the lighttpds like this: HEAD /lighttpd-test/test HTTP/1.1 Connection: close Host: tools.wmflabs.org X-Forwarded-Proto: https X-Original-URI: /lighttpd-test/test User-Agent: curl/7.29.0 Accept: */* This works great except in the case where the URL references a physical directory and misses the trailing slash ("/"), as lighttpd then generates a redirect to the http URL: HTTP/1.1 301 Moved Permanently Location: http://tools.wmflabs.org/lighttpd-test/test/ Connection: close Date: Fri, 06 Jun 2014 14:50:29 GMT Server: lighttpd/1.4.28 The relevant parts of our lighttpd configurations are: server.modules = ( "mod_setenv", "mod_access", "mod_accesslog", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", "mod_cgi", ) server.port = $port [...] server.document-root = "$home/public_html" [...] server.follow-symlink = "enable" [...] server.stat-cache-engine = "fam" ssl.engine = "disable" alias.url = ( "/$tool" => "$home/public_html/" ) index-file.names = ( "index.php", "index.html", "index.htm" ) dir-listing.encoding = "utf-8" server.dir-listing = "disable" url.access-deny = ( "~", ".inc" ) [...] How can I make lighttpd respect X-Forwarded-Proto and use it when constructing redirects for directories? I'm aware that I could try to tackle this in nginx, but I'd prefer if I can fix it in lighttpd.

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by Melot

  Hi! I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• Nvidia GTX 660m crashes games

  - by dcap

  I just recently bought a Lenovo y580 with both HD intel graphics and an Nvidia GTX 660m. It works great except for one thing: playing games. Every time I load a game, either with Steam or Games for Windows Live, games will end up crashing. I've already talked with lenovo tech support and they couldn't help other than send my new laptop for repair which would take 7 days. So before I do that I thought I'd ask around. These are the games I've tested and what happens when they load: Civilization V: Game loads fine but once it gets loaded to the game, there's noticeable "tearing" popping up and certain things flash. Within a minute of this, the game crashes. Does the same thing regardless if Vsync is on or off. Total War Shogun2: Game gets to the menu screen. The background of the menu screen shows what is expected - slideshow of in-game environments rendered on high settings (this is expected). However, within 2 seconds of the menu loading up it crashes. Age of Empires 3 (Non-steam): This game is several years old so it should work on this brand new laptop fine. However the results are similar to that of Civilization V. Noticeable "Tearing" and after a few seconds it'll freeze/crash. I've done tests on all these games with both the latest stable Nvidia driver 285 as well as the nightly build 307. In addition, Nvidia control panel is set on using the dedicated graphics card for all programs. So is there anything I can do to fix this or will I have to send it back for a week to tech support?

  Read the article

• Is 40+ Logons on Exchange 2003 per user normal?

  - by cbsch

  Hello! We've had a problem at work where users sometimes randomly can't connect to exchange. I've found out that it's because they reached the limit of 32 concurrent logons. I increased the maximum allowed connections by adding the key "Maximum Allowed Sessions Per User" in HKLM\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem. But I'm not sure if this is a real good fix. Looking at the logons some users has as many as 15 logons with the exact same logon time. I know for sure that Outlook 2007 does this, as I was watching them while a user connected with Outlook after a restart on the Exchange service. Every user also has an iPhone connected to exchange, I don't know if these cause the same thing. Is this normal? Could there be a bug in the software? (The Outlook 2007 has nothing configured, except added the user, pure vanilla installs). The users are mobile, and when Outlook generates up to 15 connection every time it connects, and I've read (no sources, sorry) that Outlook doesn't time out connections before 2 hours. I might have to set this number real high to prevent it from being a problem.

  Read the article

• Configuring iPad Mail app & Gmail app with different accounts? [migrated]

  - by Steve Crane

  I prefer to use the Gmail app over the standard Mail app on my iPad for reading my personal Gmail (I delete a lot of mails, newsletters, etc., after reading and this is one tap in Gmail and several in Mail). I have them set up so my personal Gmail uses the Gmail app and my work email is set up to use the standard Mail app. This all works fine except for one problem. If I'm in Gmail or Mail and send an email it sends from the relevant email address as expected. My problem is that when I share something via email from Safari or another app it sends from the email address configured in Settings for Mail (the work one) and I would prefer to do such sharing from my personal email address. Does anyone know if there is a way to achieve this? I could switch the addresses to use the other app but as I never delete work email and delete personal mail at least 50% of the time, the behaviour of the apps is perfect the way I have them set up; if only I could solve that one little problem of controlling where shared items are sent from. I am using an iPad 2 with iOS 5.1 should that be relevant.

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >