Search Results

Search found 23832 results on 954 pages for 'home drive'.

Page 214/954 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• Windows Home Server restore causes computer to be removed from the domain?

  - by unknown (google)

  I restored my Dell M4400 that is a company laptop, and now I get an error when I try to log on and am connected to our corporate network, which says that the domain controller could not be found or that the computer is not part of the domain. Everyone else can log on, so it seems my computer is no longer part of the domain, even though it thinks it is per the settings. One thing of note: my computer crashed on 1/14/10, but I restored from a backup that was made on 12/20/09. So I am not sure if that made a difference? Also, I tried running "gpupdate" to update my group policy, but that did not seem to help. Any ideas? Seems like a bit of a flaw in the backup system for computers that are part of a domain. I guess I wanted to hear from someone with more knowledge about how a computer is recognized as part of a domain to know if this should be expected when doing a restore or if I should file a trouble ticket.

  Read the article

• How do I set up my home server to go directly to a port other than 80

  - by Kevin

  I'm using dyndns, a lynksis wt54g router, and tomcat 7 with spring to set up a web server. This is my first time to attempt this. I'm sure this is a very common question, but I don't know enough to find the answer after quite a bit searching. Dyndns is successfully forwarding to my ip. The main problem is, the router admin login is coming up when my url is used. I'm hosting my site on port 8080. I have port forwarding set up for port 8080 but my request times out when I attempt to use my url like this www.myurl1234.com:8080. I don't want users to have to type the port anyway. I also tried changing the management port to 82 and hosting on port 80, but I still get the router admin login when I use my url. Where am I going wrong? Can I set it up so that www.myurl1234.com goes straight to port 8080?

  Read the article

• How do I restore a SQL Server database from last night's full backup and the active transaction log file?

  - by Dylan Beattie

  I have been told that it's good practise to keep your SQL Server data files and log files on physically separate disks, because it'll allow you to recover your data to the point of failure if the data drive fails. So... let's say that mydata.mdf is on drive D:, and my mydata_log.ldf is on drive E:, and it's 16:45, and drive D: has just died horribly. So - I have last night's full backup (mydata.bak). I have hourly transaction-log backups that will bring the data back up to 16:00... but that means I'll lose 45 minutes worth of updates. I still have mydata_log.ldf on the E: drive, which should contain EVERY transaction that was committed right up to the point where the drive failed. How do I go about recreating the database and restoring data from the backup file and the live transaction log, so I don't lose any updates? Is this possible?

  Read the article

• How to run your own cloud network at home?

  - by Xeoncross

  I have 7 PC's around the house that total more than 10Ghz in CPU power. I was wondering if I could put them to use building my own "cloud computing" network to help with rendering videos, blender animations, Photoshop effects, or anything else. Does something like this exists - and if so what is it called and where do I find it?

  Read the article

• Why can't I connect to my home SSH (SFTP) server? What am I doing wrong?

  - by Rolo

  I am new to this topic of creating a SFTP server on one's computer. I would like to be able to access the folder on my Windows XP computer via SFTP from another computer or a phone. The following is what I have done so far: I have installed SSH Windows and everything is setup correctly because I can access it (the folder on my pc) via WinSCP. I however cannot access it from my phone. It doesn't connect. The phone can be on the same wireless network as the Windows XP computer, but I would prefer to be able to access this when not in the same network. Now, from what I have read and understood, the following is the information needed to connect: 1) Host Name: This would be my computer's ip address which I access by typing ipconfig in a cmd prompt (I access this easily on my computer because I simply put in localhost or 127.0.0.1) 2) Port Number: That would be port 22 (I have also added this to my router in the port forwarding section). 3) Username: This would be my Windows XP username. This however is my full name, including my middle initial followed by a period. I am wondering if this is maybe causing problems in accessing it from my phone, since the name has spaces and punctuation (the period). 4) Password: The password of my Windows XP computer Extra Info: When I say phone, I mean an Android phone and I am using an ftp / sftp app to access my pc via the phone's cellular network (I also tried the wireless, but that didn't work as well). I have tried more than one program. On one program it tells me Connection timed out and on another it tells me "timeout:socket is not established" Also, I know that I can use the site noip, but I prefer to connect this way first. Also, because I am new to this, I would like to look into what exactly noip is doing and if they would be seeing my files as they are transferred from phone to pc. Thanking you in advance for your help.

  Read the article

• PC won't boot, even into bios

  - by divided

  Here's the deal: I cleaned a hard drive of some viruses (externally) and put it back into the original pc. This hard drive will boot in any other pc except the original pc. When I try other hard drives in the original pc, they are able to boot. The drive has Windows XP. What is the problem? How can I get this hard drive to work properly? The original hard drive works in other PCs. The PC boots with other hard drives acting as the master. If I boot with no hard drive, I still can't get into the BIOS These are all IDE hard drives The PC doesn't beep, it just boots into a black screen with a cursor blinking in the upper left of the screen

  Read the article

• Is it legal to use windows 7 home premium as business?

  - by Chris

  Someone told me this was illegal, is it?

  Read the article

• Move 2TB Win7x64 to 640GB HDD

  - by reedacus25

  Basically I just got a new (refurbished) HP H8-1260t to use for Windows Media Center. The shipping drive is a 2TB Hitachi drive, but I have an older and barely used 640GB WD Caviar Blue 7200RPM drive I would like to move my Windows install to. I have about 750GB of data with over 1TB free left on the drive. Having googled my heart and fingers out, I would think that I can shrink my partition down to the size it is full at now with over 1TB free for a second partition where I can move my media files to further shrink my boot partition so that I can fit a system image smaller than 640GB on that WD drive. I want to have a separate drive for Media and TV Recordings from my boot disk. Does this sound like the easiest method for me? Or am I doing this all wrong. Help appreciated.

  Read the article

• sqlserver 2008 or 2005 express cannot install on Windows 7 home ?

  - by asksuperuser

  When installing 2008 it says it requires .NET 3.5 and 2005 fails : what can I do ?

  Read the article

• How to ignore hard drives size with Windows Server Backup (Win-2008) restore?

  - by Jason

  I used Windows Server Backup to backup my 640GB boot drive. Only about 30GB is used, and the backup was very fast. Now I am trying to restore the image to a 500GB hard drive but it is saying that the drive is too small... even though I only had 30GB on the original backup. How do I overide this and have the restore ignore that I only have a 500GB drive? If I can't, then I can't restore the hard drive with anything except one that is equal to or bigger than the original hard drive - which would be a real bummer.

  Read the article

• How is the Ubuntu installation supposed to work?

  - by Bob D

  I have given up on installing Ubuntu 12.04.01 for the sixth time. I finally got Windows XP to work again. So I blitzted the Ubuntu partition and the swap partition and was about to install the sixth try when it occurred to me that ought to ask how is is "supposed" to go. My installer will install Ubuntu on the Linus ext4 partition I created by hand in Windows on my C drive. But the installer keeps insisting on installing the OS on my D drive unless I intervene. So if I choose "do something else" it will accept installing Ubuntu on the C drive in the partition I previously created, but it insists on putting the "Device for boot loader installation" on the D drive. I can select a different drive at this point (where I could not with the "along side windows choice) but what drive to I choose??? It lists sda, sda1, sda5, sdb and sdb1. The five times before this all ended in disaster letting the installer choose. So I need human intervention. Where is the safe place to do this. The results from the previous attempts left me with only the Ubuntu that would boot, the boot to windows from the grub menu failed every time. Is there a better version of Ubuntu I can use? Is V12.04.01 messed up? My goal is still to use Wine on it to run PC programs. I would like to find a shell or skin or something that makes it seem like windows but have the security and power of Linux under the good. I have seen this type of system and it worked very well. I know I am getting long winded but I have been though at least four of the seven rings of hell already, so I want this install to be the last.

  Read the article

• Difficulty Mounting Volumes on a Partitioned External HD

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• "The daemon is being inhibited" error message when mounting volumes on a partitioned external HD [closed]

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• Install on Acer Aspire 4752

  - by user216962

  I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

  Read the article

• Is there a command to "manually automount" an attached disk?

  - by cheshirekow

  I have an extra hard drive which I use for backups. The label on its one and only partition is "backup". When I open nautilus and click on "backup" it mounds the drive in "/media/backup", and then there's a little eject button next to it's icon in nautilus. If I manually mount the drive by creating a directory and using "sudo mount /dev/sdx /some/dir", the eject icon still shows up in nautilus, but when I press it I get an error because the device was not mounted via whatever it is that mounts it the other way. What I would like is to be able to do this "mount to /media/backup and enable the eject button" via the command line. The goal is to have the device mounted by a script which needs the drive, but then leave it mounted until I manually eject it... if I want to. P.S. I'm aware that I can have the drive auto mounted at startup, but that's not what I'm looking for here, and I'd like to know if this is possible. Clarification: I'm looking for a command to "mount the drive the way nautilus would". This should create the directory "/media/backup", mount the device to that directory, and then when I press the eject button from nautilus, it should unmount the device and delete the directory.

  Read the article

• No space left on disk

  - by Ned

  folks. I'm trying to copy/move files to an external 1 TB hard drive with about 50 GB remaining space. I receive a "no space left on disk" when I try. I've moved files off and retried, but still get the same message. Disk Usage Analyzer, Properties, and freeware Treesize all report available hard drive space of about 50 GB. I've tried df -i (50 GB available) and df -k, with the latter reporting only 1% of inode usage. I've been able to save files from Firefox to the drive also. I can't even rename files without getting the message. Yesterday in the midst of trying to figure this out I tried to move 4 files to the drive and got the message. Today, I found them on the drive. What's up with that? (That's the only time that has happened to my knowledge.) Is this an ubuntu problem? or is my hard drive just about to fail because of something like a controller problem? Any thoughts would be appreciated.

  Read the article

• Expanding RAID-5

  - by Garry

  I'm new to RAID and trying to get my head around things. I have owned a Drobo in the past (which I liked) but it failed. Here's a hypothetical scenario: Assume I set up a RAID-5 array consisting of four 1TB hot-swappable 2.5" SATA drives. I name this volume 'My Data'. By my calculations, that would give me 2.7TB of usable space and the ability to recover if a single drive fails. I have a few questions: What happens if I pull out a single 1TB drive and replace it with a 2TB drive? Would the array automatically rebuild itself with no issues? Would the maximum capacity remain 2.7TB? If number (1) above is true and the array rebuilds itself with three 1TB drives one 2TB drive what would happen if I then pulled another 1TB drive out and stuck in a 2TB drive (you can see where I'm going here can't you). Would I eventually be able to gain more storage by gradually adding bigger drives? From a practical point of view, how much input is required from me as the end user whilst these drives are being pulled out and put in? On the Drobo, the storage space just automagically handles itself. Would I have to be actively involved in telling Ubuntu what was going on or would any of it be automated? Thanks in advance,

  Read the article

• Upgrading a hard disk – To repave or to migrate, that is the question

  - by guybarrette

  I recently changed my laptop hard disk from the stock 250GB 5400 drive to a 320GB 7200 drive.  And no, I didn’t bought a SSD drive because the cost is way too much right now.  At $70, my upgrade was a lot cheaper than a SSD drive.  Maybe next year. When changing a system main hard drive, one must ask himself: To repave or to migrate, that is the question.  I choose to migrate so I went to the Acronis Website to take a look at their product line.  They have a few products that could do the job.  One being Acronis Migrate Easy 7.0 and the other being Acronis True Image Home 2010.  Since True Image was just $10 more then Migrate Easy, I bought True Image. I inserted my new hard drive in a 2.5” USB enclosure, and started the migration process.  Once the data copied, I switched the drives.  The process went very smoothly and without hiccups.  Highly recommended. BTW, Acronis offers free trials so I guess that nothing can stop you from “testing” a migration  ;-) var addthis_pub="guybarrette";

  Read the article

• GRUB2 stuck at rescue console, showing "unknown filesystem" for all partitions

  - by AndiDog

  I installed Ubuntu 12.04 on my external USB drive, where I have a 700GB NTFS partition followed by the new 6GB ext4 partition and a swap partition (all primary). The GRUB MBR is also installed to the external hard disk. Since my BIOS puts the external drive as first disk when booting, I removed my internal hard disk before installation in order to avoid ordering problems. Now when I boot from the external drive, GRUB is stuck at the rescue console with the error "unknown filesystem". grub rescue> ls (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) ls (hd0,<any of them>)/ gives me "unknown filesystem", thus also "insmod normal" GRUB doesn't seem to be able to read my Linux partition as you can see above?! How can I solve this? Additional info: bootinfoscript says (this is with the internal drive in again, but that does not make a difference): Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos2)/boot/grub on this drive. sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:

  Read the article

• I have Ubuntu only and need to install Windows

  - by Terzuz

  I had Windows 8, I installed Ubuntu for a new OS, Then I want to sadly go back to Windows , I have a Windows Vista *.iso but I can't boot from it. When I try to extract the '.iso file and have the contents on my USB so it can boot up , When I restart and click F9 for my Boot Device Options , Only my Hard Drive and CD ROM are there but my "Generic Flash Drive" is not , But when I do not have Windows Vista '.iso on it , It will show up in the list. How can I make a partition of some sort, Provide instructions since I am new at this all , then I need to be able to use the Windows Vista installer and install Windows Vista, I would like Dual-Boot if possible. Info: I have the HP 2000 Laptop (Mine was removed from the Best Buy Website so the closest laptop to the specifications and the design is the link at the bottom) I am running Ubuntu 12.10. I have 4GB of RAM , 220 GB in my Hard Drive left , I have a USB Flash Drive which works sometimes , other times it fails. Note - I tried using GParted in Ubuntu but I had a problem where the main drive with 220 GB Free was locked , I am not sure what to do and can not find the correct forum. http://www.bestbuy.com/site/HP+-+Pavilion+15.6"+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Pewter/5043836.p?id=1218608951204&skuId=5043836

  Read the article

• How to recover missing folders in a Windows-Ubuntu dual-boot system?

  - by UnhappyGhost

  I have Windows 7 and Ubuntu 12.04 as dual-boot and on the same 500GB HDD. I have partitioned the drive into NTFS file system from Windows before I installed Edubuntu 12.04 in the remaining free space. Now, there is a drive(G:) accessible through Windows and has few folders. I boot into Edubuntu and create a folder "LinTor" and download movies and few software from torrentz. Before I download, it showed 49GB free out of 62GB. After all the downloads it showed 31GB free out of 62GB. Then I boot into Windows and I couldn't find this "LinTor" folder. I wondered that might be happening as I hibernate Edubuntu (using sudo pm-hibernate) and then boot into Windows. I then create another folder in the same drive(G:) with the name "001" to check if this was accessible from Edubuntu. Now I reboot into Edubuntu to find that "LinTor" folder has disappeared and "001" folder wasn't showing up either. Surprisingly, the drive size still shows 31GB free out of 62GB but when I check it from Windows, it shows 49GB free of 62GB. There is one thing I would like to mention. When I was trying to unmount the NTFS drive(G:) from Edubuntu before booting into Windows, it prompted me with this message: Do you want to empty the trash before you unmount the drive? Once the trash is emptied the data is permanently deleted and cannot be recovered. Please help me understand what could be the problem and how do I recover the missing folder?

  Read the article

• Data recovery on a Samsung SV1203N HDD

  - by Jim Conace

  Let me start by saying that I am a beginner in Ubuntu, but pretty knowledgeable with Windows. I am having a strange problem trying to recover data from a Samsung SV1203N HDD (120 GiB). I have tried numerous things in both Windows 7 and Ubuntu 12.04 LTS (on a flash drive, an external HDD and a Live CD). This drive has some very important data on it and I am praying some of you Ubuntu geeks can help me get it back. Here's my problem. The HDD is clicking while I am booting, but it stops when I get into Ubuntu or Windows. It refuses to be detected in the bios, so I cant perform any tests on it. I have tried numerous things in both Windows (repair CD, Jumpers, etc.) and Ubuntu (Boot-Fix, GParted, Testdisk, Photorec, forcing a mount, etc.). But it all seems to lead me back to the fact that the drive is not being recognized in the BIOS. I've even tried chilling the drive in the fridge, which worked well for another drive I work on, and I recovered all of the data in Ubuntu flawlessly. I am assuming that since the drive stops clicking when I get into the OS' that there is hope for recovery. I am going to try an IDE/SATA to USB cable, and replacing the Logic Board, but I want to exhaust all other possibilities before I do that. Any help would be greatly appreciated Bye

  Read the article

• Need strategy to phone home to a Pyton web app and check licensing information for a commercial Wind

  - by Cornish

  What's a good strategy for building licensing checking into a Windows desktop app using a Python web application? This is a very open ended question because I don't have the slightest clue how to start to build this feature. What I do have is a number of general concerns: I have developed a commercial Windows desktop application and I want to make money from it but I don't want to build the licensing into the app since it's inevitable that someone will create a keygen or a crack, circulate it online and then it's 'game over' for me. So my idea was to create a web application where people could purchase a license key that is generated by the web app and every time the desktop application is started up, it will 'phone home' to the web app to check whether the license is valid and whether it seems to be in use at multiple locations. I'm just not sure how to do this. Would appreciate any general technical strategies and/or pointers to libraries/modules that might be of use.

  Read the article

• Facebook Iframe App in Safari links to home page. Works OK in other Browsers.

  - by Bathan

  I have a facebook iframe that has several php files in it. In all tested browsers (IE,FFOX,Chrome) the links on the header work fine and go to the php files inside the iframe. When I tried this on Safari the links are reloading the whole app inside the iframe. Is like a recursive call because Its not like im having the home page reloaded inside the iframe but the whole facebook page WITH the iframe.. reloaded inside my iframe. The links are called using javascript with document.location.href="myPage.php"; Tryed placing target "_self" inside the link but this turned out weird : the iframe page was placed on top of everything, as if I had specified "_parent" on the target. Any help?

  Read the article

• Is there a way to animate on a Home Widget?

  - by David

  Hi All, I want to use an animation on a Home page Widget, i.e. an AppWidgetProvider. I was hoping to use the "Frame Animation" technique: http://developer.android.com/guide/topics/graphics/2d-graphics.html#frame-animation which I've used successfully in an activity. But I can't translate that code to an AppWidgetProvider. Basically, in an AppWidgetProvider, I create and work with a RemoteViews object, which AFAIK doesn't provide me with a method to get a reference to an ImageView in the layout for me to call start() on the animation. There is also not a handler or a callback for when the widget displays so I can make the start() call. Is there another way this can be done? I suppose that I can probably do the animation on my own with very fast onUpdate() calls on the widget, but that seems awfully expensive.

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >