Search Results

Search found 8219 results on 329 pages for 'less'.

Page 215/329 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

• Setup of HP ProCurve 2810-24G for iSCSI?

  - by 3molo

  Hi, I have a pair of ProCurve 2810-24G that I will use with a Dell Equallogic SAN and Vmware ESXi. Since ESXi does MPIO, I am a little uncertain on the configuration for links between the switches. Is a trunk the right way to go between the switches? I know that the ports for the SAN and the ESXi hosts should be untagged, so does that mean that I want tagged VLAN on the trunk ports? This is more or less the configuration: trunk 1-4 Trk1 Trunk snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 24,Trk1 ip address 10.180.3.1 255.255.255.0 no untagged 5-23 exit vlan 801 name "Storage" untagged 5-23 tagged Trk1 jumbo exit no fault-finder broadcast-storm stack commander "sanstack" spanning-tree spanning-tree Trk1 priority 4 spanning-tree force-version RSTP-operation The Equallogic PS4000 SAN has two controllers, with two network interfaces each. Dell recommends each controller to be connected to each of the switches. From vmware documentation, it seems creating one vmkernel per pNIC is recommended. With MPIO, this could allow for more than 1 Gbps throughput.

  Read the article

• Lightweight Linux distro that includes developer tools? (or, the most BSD-like Linux)

  - by RevAaron

  I cut my teeth on Minix and Slackware 1.1, but I've been in the OS X Wilderness for the last few years. I'm trying to standardize on a Linux distribution for personal and work-related use on less powerful laptops and under virtualization. So far, NetBSD and OpenBSD are the best fit for my purposes- but after plenty of frustration I've come to the conclusion that I need to stick with Linux to get the hardware and software support that comes with it. What I like about NetBSD/OpenBSD that I'd like to keep: X, but no default KDE, GNOME or XFCE! A sensible /etc and dot file setup- startx calls xinit, xinit looks for ~/.xinitrc; nothing more complicated than that is needed. Command line tools and file-based configuration: I shouldn't need a GUI to connect to a WAP. Decent selection of binary packages; building from source is OK, but nothing source-only like Gentoo. pkg_add (BSD) and apt-get both have treated me well in the past. Modest RAM and HDD requirements: boot + X + awesome+ two xterms takes up 80 MB on OpenBSD and 240 MB on Debian 5 and Crunchbang In my experience, most "lightweight" and Live CDs focus on a nice desktop environment crammed into a CD or USB stick; once you add build-essentials you end up with something just about as bloated as Ubuntu or Debian full install. Crunchbang is a great example. Thanks in advance for all suggestions!

  Read the article

• Cannot upload files bigger than 8GB to Amazon S3 by multi-part upload due to broken pipe

  - by spencerho

  I implemented S3 multi-part upload, both high level and low level version, based on the sample code from http://docs.amazonwebservices.com/AmazonS3/latest/dev/index.html?HLuploadFileJava.html and http://docs.amazonwebservices.com/AmazonS3/latest/dev/index.html?llJavaUploadFile.html When I uploaded files of size less than 4 GB, the upload processes completed without any problem. When I uploaded a file of size 13 GB, the code started to show IO exception, broken pipes. After retries, it still failed. Here is the way to repeat the scenario. Take 1.1.7.1 release, create a new bucket in US standard region create a large EC2 instance as the client to upload file create a file of 13GB in size on the EC2 instance. run the sample code on either one of the high-level or low-level API S3 documentation pages from the EC2 instance test either one of the three part size: default part size (5 MB) or set the part size to 100,000,000 or 200,000,000 bytes. So far the problem shows up consistently. I attached here a tcpdump file for you to compare. In there, the host on the S3 side kept resetting the socket.

  Read the article

• Swap space maxing out - JVM dying

  - by travega

  I have a server running 3 WordPress instances, MySql, Apache and the play framework 2.0 on 64m initial & max heap. If I increase the max heap of the JVM that play is running in even by 16m I see the 128m of swap space steadily fill up until the the JVM dies. I notice that it is only when I am plugging away at the wordpress sites that the JVM will die. I assume this is because the JVM is not asking for memory at the time so gets collected. I notice that when I restart Apache I reclaim about half of my swap and RAM. So is there some way I can configure apache to consume less memory? Also what could be causing the swap space to get so heavily thrashed with just 16m added to the max heap size of the JVM? Server running: Ubuntu 12.04 RAM: 408m Swap: 128m Apache mods: alias.conf alias.load auth_basic.load authn_file.load authz_default.load authz_groupfile.load authz_host.load authz_user.load autoindex.conf autoindex.load cgi.load deflate.conf deflate.load dir.conf dir.load env.load mime.conf mime.load negotiation.conf negotiation.load php5.conf php5.load proxy_ajp.load proxy_balancer.conf proxy_balancer.load proxy.conf proxy_connect.load proxy_ftp.conf proxy_ftp.load proxy_http.load proxy.load reqtimeout.conf reqtimeout.load rewrite.load setenvif.conf setenvif.load status.conf status.load

  Read the article

• Outlook slow to open attachments

  - by Alistair McMillan

  When a colleague tries to open attachments in her email (Outlook 2003 talking to an Exchange 2007 server) they talk ages to open. The files are relatively small, all less than 1MB. We've tried creating a new Windows profile for the user and tried creating new Outlook profiles, however that hasn't made any difference. And we've tried accessing her account from someone else's PC, and the attachments open immediately there. The only thing that might provide a clue is that Process Monitor shows Outlook on her PC trying to write the file to a folder within the user's "Temporary Internet Files" folder with FAST I/O DISALLOWED errors. Can't find a lot of useful information on that message online though. What causes the FAST I/O DISALLOWED errors? And would that make opening attachments so incredibly slow that opening a < 1MB file can take a matter of minutes? UPDATE: Discovered that this isn't just an issue with Outlook. Other files being accessed over the network show the same FAST I/O DISALLOWED errors in Process Monitor. The problem is just more noticeable with Outlook, because although other applications take a while to open files it isn't a matter of minutes.

  Read the article

• mcelog doesn't fails to start PUIAS 6.4 amd hardware

  - by Predrag Punosevac

  Folks, I am a total Linux n00b. I am trying to deploy mcelog on one of my computing nodes running PUIAS 6.4 (i86_64) [root@lov3 edac]# uname -a Linux lov3.mylab.org 2.6.32-358.18.1.el6.x86_64 #1 SMP Tue Aug 27 22:40:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux a free clone of Red Hat 6.4 on AMD hardware [root@lov3 mcelog]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 4 NUMA node(s): 8 Vendor ID: AuthenticAMD CPU family: 21 Model: 2 Stepping: 0 CPU MHz: 1400.000 BogoMIPS: 4999.30 Virtualization: AMD-V L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 6144K NUMA node0 CPU(s): 0-7 NUMA node1 CPU(s): 8-15 NUMA node2 CPU(s): 16-23 NUMA node3 CPU(s): 24-31 NUMA node4 CPU(s): 32-39 NUMA node5 CPU(s): 40-47 NUMA node6 CPU(s): 48-55 NUMA node7 CPU(s): 56-63 My mcelog.conf file is more or less default apart of the fact that I would like to run mcelog as a daemon and to log errors. When I start mcelog [root@lov3 mcelog]# mcelog --config-file mcelog.conf AMD Processor family 21: Please load edac_mce_amd module. However the module is present [root@lov3 mcelog]# locate edac_mce_amd.ko /lib/modules/2.6.32-358.18.1.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko /lib/modules/2.6.32-358.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko and loaded [root@lov3 edac]# lsmod | grep mce edac_mce_amd 14705 1 amd64_edac_mod Is there anything that I can do to get mcelog working? The only reference I found is this thread http://lists.centos.org/pipermail/centos/2012-November/130226.html

  Read the article

• How could Google Latitude find my exact PC location with no GPS or public wifi?

  - by Mike

  I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

  Read the article

• Sharing large (multi-Gb) files with clients

  - by Tim Long

  I wasn't sure if this was the best place for this question, but I think it is squarely in the realm of the IT admin so that's the reason I put it here. We need to share large files (several Gigabytes) with external clients. We need a simple way of reliably and automatically publishing these files so that clients can then download them. Our organization has Windows desktops and a Windows SBS 2011 server. Sharing from our server is probably suboptimal from the client's perspective, because of the low upstream bandwidth of typical ADSL (around 1 Mbps) - it would take all day (9 hours for a 4Gb file) for the client to download the file. Uploading to a 3rd party sever is good for the client but painful for us, because we then have to deal with a multi-hour upload. Uploading to a third-part server would be less problematic if it could be made reliable and automatic, e.g. something like a Groove/SharePoint Workspace, simply drop the file in and wait for it to synchronize - but Groove has a 2Gb limit which is not big enough. So ideally I'd like a service with the following attributes: Must work for files of at least 5Gb, preferably 10Gb Once the transfer is started, it must be reliable (i.e. not sensitive to disconnections and service outages) and completely automatic Ideally, the sender would get a notification when the transfer completes. Has to work with Windows based systems. Any suggestions?

  Read the article

• Finding a backup and synchronization solution

  - by Andrea Zilio

  I'm having difficulties to find a backup and synchronization solution with the following characteristics: Cross-platform: Windows, Linux, Mac Offsite backup (so Internet Backup) Data deduplication Transfer only new/modified bits of modified files Secure: Data encrypted before leaving computer Maintain multiple versions of files (even deleted files) Folder synchronization integrated with backup and across multiple computers connected to the internet (not necessarily in the same LAN) I think that the Folder Sync feature needs a better explanation. The use case is this: you have a desktop pc and a laptop. The desktop pc contains a folder with some files and this folder is part of the backup (so it was selected to be backed up). The laptop does not contain that folder or that files at all. Then you're abroad with your laptop and you need that folder. So you want to be able to open the backup program, select that folder from the backup and download it in your laptop mantaining it synchronized with the backed up version. When you then come back home and switch on your desktop pc you want the folder we're talking about to be updated in the desktop PC. Does anyone knows any service with all these features? I've only found SpiderOak to support all the features I've mentioned but I'm not completely satisfied by the time taken to complete a backup. Sometimes it seems to hang for minutes with no reasons at all and folder synchronization occurs only after all files are backed up (instead folder sync should have a separated queue independent from other backup operations and synchronization should occurs frequently... for example every 5 minutes or less, independently from the frequency of normal backup operations)

  Read the article

• Reorganize Primary/Recovery Partitions and then install Ubuntu Netbook Remix?

  - by Wesley

  Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I recently got a new hard drive and motherboard for it because the original parts were faulty. However, when I got it back, whoever was working on it decided to make my primary partition ~40GB in size, compared to (what appears to be) the recovery partition, which is around 100GB in size. Firstly, I want to make the recovery partition much smaller (around ~10GB or smaller, if possible) and then make my primary partition fill the rest of the space. After that, I want to install Ubuntu Netbook Remix 9.10. I don't know if this is installed within Windows like Ubuntu 9.10 but I want both XP and UNR on my machine at the same time. So basically... how do I resize my primary and recovery partitions such that the recovery is about 10GB or less and the primary fills the rest? Secondly, is UNR installed within Windows? (If not, would it create its own partition on my hard drive, along with the XP partition, and the recovery partition?) Thanks in advance.

  Read the article

• how to correctly mount fat32 partition in Ubuntu in order to preserve case

  - by Dean

  I've found there are couple of problems might be related how my FAT32 partition was mounted. I hope you can help me to solve the problem. I also included the command I used to help others when they find this post, sorry to those might feel I should use less space. I've the following file structures on my disk dean@notebook:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x08860886 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 5737 45978624 7 HPFS/NTFS /dev/sda3 5738 10600 39062047+ 83 Linux /dev/sda4 10601 19457 71143852+ 5 Extended /dev/sda5 10601 11208 4883728+ 82 Linux swap / Solaris /dev/sda6 11209 15033 30720000 b W95 FAT32 /dev/sda7 15033 19457 35537920 7 HPFS/NTFS In the etc/fstab I've got UUID=91c57a65-dc53-476b-b219-28dac3682d31 / ext4 defaults 0 1 UUID=BEA2A8AFA2A86D99 /media/NTFS ntfs-3g quiet,defaults,locale=en_US.utf8,umask=0 0 0 UUID=0C0C-9BB3 /media/FAT32 vfat user,auto,utf8,fmask=0111,dmask=0000,uid=1000 0 0 /dev/sda5 swap swap sw 0 0 /dev/sda1 /media/sda1 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 /dev/sda2 /media/sda2 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 I checked my id using id and I've got dean@notebook:~$ id uid=1000(dean) gid=1000(dean) groups=4(adm),20(dialout),24(cdrom),46(plugdev),103(fuse),104(lpadmin),115(admin),120(sambashare),1000(dean) I don't know why with these settings I still have problem of using svn like in this one Thank you for your help!

  Read the article

• Mouse click-focus wanders in vmPlayer 3.0 dual-monitor

  - by Gary M. Mugford

  Previously, a WinXPSP3 session running on a WinXPSP3 host computer ran perfectly fine in a dual monitor setup. No issues with vmPlayer 2.x. BEFORE updating to vmPlayer 3, the following problem cropped up. When clicking in a single monitor, you would get exactly what you expected. However, when the display was stretched across two monitors, the clicking would be to the left of the mouse cursor. The farther RIGHT you were, the farther left the click would occur. In other words, if you clicked on the system menu of a window in the upper left of a window on the left monitor, you would get the system menu. Move half a screen to your right and the click would be on an item about a quarter of the way over, rather than where you were clicking. And by going all the way to the far right of the right monitor, you could bring up a right-click menu on the far right of the LEFT monitor. I Hope I have described this properly. It's confusing, even in words. In single monitor mode, everything works perfectly fine. If, instead of using either UltraMon or DisplayFusion, you run a single desktop across both monitors (3200x1600), there are no mousing issues. Unfortunately, having two 1600x1200 monitors, that depth of 1600 makes that hack less than useable. My graphic card won't offer anything resembling 3200x1200. vmPlayer 3.0 did not alleviate the situation. The microsoft mouse drivers are up to date and so are the nVidia card drivers. Any ideas?

  Read the article

• Problems sending email using .Net's SmtpClient

  - by Jason Haley

  I've been looking through questions on Stackoverflow and Serverfault but haven't found the same problem mentioned - though that may be because I just don't know enough about how email works to understand that some of the questions are really the same as mine ... here's my situation: I have a web application that uses .Net's SmtpClient to send email. The configuration of the SmtpClient uses a smtp server, username and password. The SmtpClient code executes on a server that has an ip address not in the domain the smtp server is in. In most cases the emails go without a problem - but not AOL (and maybe others - but that is one we know for sure right now). When I look at the headers in the message that was kicked back from AOL it has one less line than the successful messages hotmail gets: AOL Bad Message: Received: from WEBSVRNAME ([##.###.###.###]) by domainofsmtp.com with MailEnable ESMTP; Mon, 18 Jun 2012 09:48:24 -0500 MIME-Version: 1.0 From: "[email protected]" <[email protected]> ... Good Hotmail Message: Received: from mail.domainofsmtp.com ([###.###.###.###]) by subdomainsof.hotmail.com with Microsoft SMTPSVC(6.0.3790.4900); Thu, 21 Jun 2012 09:29:13 -0700 Received: from WEBSVRNAME ([##.###.###.###]) by domainofsmtp.com with MailEnable ESMTP; Thu, 21 Jun 2012 11:29:03 -0500 MIME-Version: 1.0 From: "[email protected]" <[email protected]> ... Notice the hotmail message headers has an additional line. I'm confused as to why the Web server's name and ip address are even in the headers since I thought I was using the SmtpClient to go through the smtp server (hence the need for the username and password of a valid email box). I've read about SPFs, DKIM and SenderID's but at this point I'm not sure if I would need to do something with the web server (and its ip/domain) or the domain the smtp is coming from. Has anyone had to do anything similiar before? Am I using the smtp server as a relay? Any help on how to describe what I'm doing would also help.

  Read the article

• iSCSI SAN Implementation with several ESXi hosts and two Equallogic SANs

  - by Sergey

  I work for a small state college. We currently have 4 ESXi hosts (all made by Dell), 2 EqualLogic SANs (PS4000 and PS4100) and a bunch of old HP Procurve switches. The current setup is very far from being redundant and fast so we want to improve it. I read several threads but get even more confused. The Procurve Switches are 2824. I know they don't support Jumbo Frames and Flow Control at the same time, but we have plans to upgrade to something like Procurve 3500yl. Any suggestions? I heard Dell Powerconnects 6xxx are pretty good but I'm not sure how they compare to HPs. There will be a 4-port Etherchannel (Link Aggregation) between the switches, and all control modules on SAN will be connected to different switches. Is there anything that will make the setup better? Are there better switches then Procurves 3500yl that cost less than 5k? What kind of bandwidth can I expect between ESXi hosts (they will also be connected to 2824 with multiple cables) and SANs?

  Read the article

• Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

  - by Madiyaan Damha

  I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running the default Ubuntu VNC server. I have another computer that has a resolution of about 1200x1024 that I use to VNC into the server using the default Ubuntu VNC viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how Windows Media Player or VLC scales down the window (and does some interpolation of pixels). Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there.

  Read the article

• Apache+PHP on Windows Server 2008

  - by Álvaro G. Vicario

  I've installed Apache/2.2 and PHP/5.3 lots of times under Windows XP, Windows Vista and Windows Server 2003. The official *.msi installers work fine and configure everything. Now I need to install them into a Windows Server 2008 R2 Standard 64-bit box and I'm facing nothing but problems: There are no official 64 bit binaries for Apache and no binaries at all for PHP (official or third-party). It's alright, I'll do with good 32 bits, but it's kind of surprising. Official documentation is vague, generic and completely unaware of UAC or any recent Windows security feature. The PHP installer is unable to configure mod_php and the Apache installer is unable to configure... well, Apache. After three hours I've finally reached the point where I'm installing everything in the root folder and assigning full control access to all users in all files and directories and all I've got is a PHP-less Apache server that's able to serve static pages. So I guess it's time to stop and think. My question is: Has anyone installed an Apache+PHP production server under Windows Server 2008 in a serious, secure and reliable way and documented the whole process? Or should I just find a bundle like XAMPP and the like that requires no installation? === EDIT === I've installed Xampp Lite 1.7.3 and everything was working in 5 minutes. I'd still like to find some documentation about installing the original packages: XAMPP installs tons of stuff I don't need and offers no tool to enable and disable PHP extensions.

  Read the article

• Rename a Network Printer win Win 7

  - by Alex

  Seems this is a common question but the answers regularly miss the point. I have a server. Server has some printers connected. Server has all drivers for x32 & x64 OS PLUS ALL DEFAULTS set. Server also manages print queue. I have many workstations, all need to use the printers. All NEED to have drivers print queue and DEFAULTS propagated from server. Now.... When I add the printers on the workstations, I get: "ABC Printer on SERVER123" I need something less long - just "ABC Printer" So how? Tip: Please don't show me how to change the name of your locally installed printer. I know how to do this - I am particularly interested in shared printers that look like "ABC Printer on SERVER123" Tip: Installing the driver with a local port wont cut it because then I loose the server propagated defaults, the driver updates and I need to run around with driver disks/confuse trembling users with hard things like choosing drivers. I am happy for a hack if there is no official way to do this in the group policy.... I tried looking in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers on the workstation machines but those are only local printers :( I can see the network printer details on the workstations here: HKEY_USERS[Some GUID]\Printers\Connections But there is nothing obvious like a description string... Can anyone help with this?

  Read the article

• IDE/PATA high-speed hard drive dock

  - by wfaulk

  I frequently need to access bare drives for backups and need a quick, high-speed way to deal with them. There are a multitude of SATA hard drive docks (for example), but I have a lot of IDE/PATA (hereafter "IDE") drives that I would like to be able to use similarly. There are IDE-to-SATA adapters so you can plug your IDE hard drive into a SATA port, so I don't see any reason why you couldn't use the same technology to have a native dock, yet none seems to exist. Now, I'm aware that 3.5" IDE drives do not have a specification for the layout of the connector, and therefore can't be slapped into a dock the same way a SATA drive could, but 2.5" PATA drives do. In fact, I'm not terribly interested in supporting 3.5" drives. It would be nice, but I deal with them far less frequently than 2.5" drives. Also, I'd very much like for the connection to the computer be faster than USB, preferably eSATA, I don't want to be spending time mounting a drive inside an enclosure, I don't want bare drives lying around with a cable hanging off of them, and I'd prefer a single dock rather than two. What seems like the ideal solution to me would be a regular SATA→eSATA dock and some sort of screwless adapter for IDE drives, but I'm open to any suggestions, regardless of my stated preferences, but which are, in some sort of order of preference: high-speed (faster than USB, at least) holder for drive (not just a cable) no complicated enclosure support for 3.5" IDE drives single dock Updates: Here's a 3.5" IDE to 3.5" SATA docking adapter that could be part of the solution. Weird. I figured that would be the impossible part. I was hoping to find something like this 2.5" to 3.5" SATA chassis that would take a 44-pin IDE drive internally. It looks like the Vantec EZ Swap EX comes awfully close. It has its own bay dock, but it looks like the SATA ports on the back are spaced properly, even if they're not aligned quite properly. Unfortunately, the proper position is at the very edge of the drive, which means that the docks' connectors are at the very edge of their recesses, which means there's no way to fit it in there.

  Read the article

• Linux machine can't find its tape drive

  - by Kyle Hodgson

  I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not totally sure why; sometimes when this happens the Autoloader's LED's are orange and it needs to be power cycled. The annoying workaround currently is to reboot the machine. As it is our production VPN and DNS server in addition to being our backup server, this is less than optimal. In Debian (Sarge) is there not some command one can type to get the card to notice that it has the autoloader connected again? dcr1:/proc# grep -i symbios /proc/pci SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 1). dcr1:/proc# uname -a Linux dcr1 2.4.27-3-686 #1 Tue Dec 5 21:03:54 UTC 2006 i686 GNU/Linux dcr1:/proc# mt status mt: /dev/tape: No such device dcr1:/proc# ls -l /dev/tape lrwxrwxrwx 1 root root 8 2007-02-07 16:01 /dev/tape -> /dev/st0 dcr1:/proc# That mt status command will show the actual st0 status when things are working correctly. The No such device message is usually the second clue that we need to reboot - the first clue is usually that the backups didn't run.

  Read the article

• applying rules to CC'd messages in Outlook 2007

  - by Danny Chia

  This is probably a silly question, but here goes: I have two e-mail aliases that forward messages to my main address. I'm trying to create a rule to move all messages that I receive to a specific folder. There is a condition that applies to messages "where my name is in the To or Cc box," but it doesn't let me specify what "my name" is. Not surprisingly, it only affects messages that have not been sent to an alias. So far, I found a solution as follows: I select the condition that applies to messages with specific words in the recipient's address, and I enter my address and aliases as those "words." It's kind of an awkward hack, but it works. Normally, this wouldn't be much of an issue, but I have a "family computer" that is shared among my parents and myself, and I don't want their e-mails and mine to be jumbled together in the Inbox. So my questions are: Is there a solution that is less awkward than the one I used? Alternatively, is there a way to assign multiple e-mail addresses (or aliases) to one account? Thanks!

  Read the article

• How to make 7-Zip faster

  - by Matt

  I normally use WinRAR over 7-Zip simply because it's faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7-Zip and WinRAR default settings on their normal compression and their best compression, and in a lot of cases WinRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7-Zip speed up? I'd like it to at least be on par with WinRAR's speed Is there a way to make recovery segments in 7-Zip like you can in WinRAR? I didn't see any, but I guess it could be a command line thing. I tested WinRAR and 7-Zip using the latest stable version of each (4-dot-something with 7-Zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core Intel i7 720 (1.6 GHz)/(2.8 GHz) with 4 GB DDR3 RAM, and the 64-bit version of 7-Zip, and dual-boot Debian x64 5.0.4 and Windows 7 Home.

  Read the article

• Managing Apache to Compensate for WebDAV's Security Masking

  - by Tohuw

  When a user creates a file via WebDAV, the default behavior is that the file is owned by the user and group running the Apache process, with a umask of 022. Unfortunately, this makes it impossible for unprivileged users to write to the files by other means without being a member of the group Apache runs under (which strikes me as a particularly bad idea). My current solution is to set umask 000 in Apache's envvars and remove all world permissions from the webdav parent directory for the user. So, if the WebDAV share is /home/foo/www, then /home/foo/www is owned by www-data:foo with permissions of 770. This keeps other unprivileged users out, more or less, but it's hokey at best and a security disaster awaiting at worst. From my research and poking around at mod_dav and Apache, I cannot find a reasonable solution short of a cron job flipping all the permissions back (I'd rather not have the load and increased complexity on the server). SuExec won't work, either, because WebDAV operations are not going to execute as a different user. Any thoughts on this? Thank you.

  Read the article

• Using pre-made patch cables on a punch down block?

  - by Trevor Harrison

  I need to add a 24 port switch to my wiring closet. In the (distant) past, I usually just punched each port of the switch to a 110 block on the wall (using hand-made cables), and cross connect between that and the 110 block that has the runs to each workstation. To save time, I'm thinking of buying 12 pre-made drop cables, cutting them in half (so 24 single ended cables), and punching those to my 110 block. The things I'm worried about are wire type (ie. solid vs. strands) and color scheme. I really don't know if they use different wire types (still?), but I remember that being an issue at one point. Can anyone comment on this? (I definitely won't feel comfortable trying to punch stranded wiring on my 110 block) Also, picking up a random pre-built cable I had laying around, I noticed that the color scheme used didn't appear to be T568B, but T568A, which would clash with the rest of my wall. Anyone know of an online source that specifies these things? I've looked at www.cablesforless.com (which does have nicer prices) and www.cablestogo.com (which seem stupid expensive) so far. Cables For Less doesn't specify wiring scheme, Cables To Go does specify T568B. Both seem to specify stranded wires instead of solid.

  Read the article

• Requiring SSH-key Login From Specific IP Ranges

  - by Sean M

  I need to be able to access my server (Ubuntu 8.04 LTS) from remote sites, but I'd like to worry a bit less about password complexity. Thus, I'd like to require that SSH keys be used for login instead of name/password. However, I still have a lot to learn about security, and having already badly broken a test box when I was trying to set this up, I'm acutely aware of the chance of screwing myself while trying to accomplish this. So I have a second goal: I'd like to require that certain IP ranges (e.g. 10.0.0.0/8) may log in with name/password, but everyone else must use an SSH key to log in. How can I satisfy both of these goals? There already exists a very similar question here, but I can't quite figure out how to get to what I want from that information. Current tactic: reading through the PAM documentation (pam_access looks promising) and looking at /etc/ssh/sshd_config. Edit: Alternatively, is there a way to specify that certain users must authenticate with SSH keys, and others may authenticate with name/password? Solution that's currently working: # Globally deny logon via password, only allow SSH-key login. PasswordAuthentication no # But allow connections from the LAN to use passwords. Match Address 192.168.*.* PasswordAuthentication yes The Match Address block can also usefully be a Match User block, answering my secondary question. For now I'm just chalking the failure to parse CIDR addresses up to a quirk of my install, and resolving to try again when I go to Ubuntu 10.04 not too long from now. PAM turns out not to be necessary.

  Read the article

• Magento Apache Config & Memory Issues

  - by cheshirepine

  I have a Magento installation on a VPS that is giving me a headache. This particular VPS has a reasonable spec - 2gb Memory and 50gb storage. It runs a single domain, with a single Magento install - and nothing else. About 5 months ago we started having issues. Every so often (about once every 2 or 3 weeks) the VPS would crash - all processes stopped and the only way to restart the container is via Virtuozzo. Now, however its 2 or 3 times a week. My VPS hosts confirm I am breaching the 2gb memory limit, at which point all VPS processes are killed to stop it bringing the entire node down. I have not made any config changes to it at all - I was running New Relic on it for a short while, but have removed that in case it was contributing to the issues. I can see nothing in the logs which indicates an issue and we have no CRON jobs running at the time the crashes happen. The site generates steady, but not huge amounts of traffic (averaging usually less than 100 visits per day) Is there anything in particular I should have done to the Apache or PHP configs to help? Im not a massivley experienced Apache admin, but know more than enough to solve most problems... Failing that, any other ideas that might help? Can't afford for this site to be down this much.

  Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >