Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 215/286 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

• Sonicwall SSL VPN: Unable to reconnect once connection drops

  - by Jeffrey Hantin

  One of my users is having problems with his NetExtender connection. After installing NetExtender from the portal, it connects fine -- ONCE. After that, attempting to reconnect gives Verifying user...authentication fail! and the log on the router shows: [timestamp] | Info | SSLVPN | Auth Failed: No user name in http request (message id: 1079) This seems odd to me because the user name, password and domain are entered on the NetExtender client. After this error occurs, the only way to connect again is to uninstall, reboot, and reinstall NetExtender. He can connect fine to the Sonicwall SSLVPN demo site, and a different user can connect fine to this site from a different PC. Any clues?

  Read the article

• Cannot Connect to internet in windows 7 (No Internet Connection)

  - by user22062

  I have an airport express and Win 7 pro. My router is a Trendnet TEW-423PI G. The problem is everytime i try to connect it says it is unsuccessful and can't find ip address. I have tried everything. WPA2, WPA, WEP, Messing with the registry, Manually Inputting the ip address, Reinstalling drivers. I have two Macs that connect perfectly and are both running Snow Leopard that is why I am able to post this. What Should I do. I'm Going Crazy

  Read the article

• How to Route Traffic in Case PPTP Remote Client is on Same Subnet as Server

  - by Marcus Cole

  I've a PPTP server setup on my local home network (192.168.1.0/24, pfSense). Now sometimes when I'm away and want to connect remotely my client (Windows 7) is also on the same network because e.g. the hotel has set it up the same way. Thus the connection works, but I can't reach any PC on my home network because everything is routed directly to the client local router which is in the same subnet. Is there a way to work around this by messing with a configuration or adapting Windows routing table, i.e. without modifying either network?

  Read the article

• Wifi connection issues for Android with Linksys WRT54G

  - by Paul

  I have had this Linksys WRT54G for many years now, and it has always worked without a hassle. But for some reason I am unable to connect my brand new Android phone (Magic). The wireless network is broadcast and simply secured using WPA PSK TKIP. My phone sees the network (with excellent signal strength) and correctly asks me for the WPA password. Then when it tries to connect it stays for a while on "Retrieving address..." (liberately translated from Dutch) and finally fails reading "Remember, secured with WPA". Does anybody know how to solve this issue? edit: the android phone is genuine (not modified/rooted or whatsoever).

  Read the article

• Windows Mobile Signature Capture and Barcode Scanning

  - by cohortq

  Currently I have 7 Motorola MC75 Phones all running Windows Mobile 6.1 and using PTS Tracer Plus for signature capture and barcode scanning. After multiple returns with Motorola, and have verizon verify the data connections on all my phones in the field. I have found that PTS Tracer Plus 5, is the culprit in freezing and crashing before, during, and after signature collection. Does anyone know of another software package for Windows Mobile 6.1 that does signature capture and barcode scanning? I'm also going to try PTS Wireless 6 beta1 as well too, but I would like to know what other peopel are using successfully. Thanks!

  Read the article

• Windows 7 Not Recognizing Any Hardware, Linux Recognizing Hardware

  - by Newb

  I have a new desktop computer with two SSDs: one running Linux Mint 15 (SSD1), the other running Windows 7 (SSD2). My mint runs perfectly - USB wireless adapter is recognized, SSD2 (connected by SATA) is recognized and accessible through the filesystem, Ethernet works, etc. However, my Windows 7 is not recognizing any of these devices - even plugging in a regular ethernet cable doesn't work. It seems that it's not recognizing any network adapters, and it also doesn't recognize SSD1, connected to the mainboard by SATA. I've installed, uninstalled, and reinstalled Windows multiple times, but the problem persists. I used the Windows 7 CD to install Windows on a machine previously, and that time around, I didn't have any problems, which leads me to suspect that this might be a hardware issue, specifically with the mainboard. My mainboard is an MSI-7641 model, the 760GM-P34 FX. It uses an AMD Chipset and an AMD processor. Can anyone suggest what might be wrong, and how to fix it?

  Read the article

• Double default gateway ubuntu server

  - by Elena

  Hi, I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• Port Forwarding on 80 vs. 8080

  - by Chadworthington

  I am able to access this url (Don't bother clicking on it, it's just an example): http://my.url.com/ This web site works: http://localhost:8080/tfs/web/ I setup my router to forward port 80 to the PC hosting the web site. I also forward port 8080 to the same box. But when I try to access this url I get the eror "Page Cannot be displayed:" http://my.url.com:8080/tfs/web/ I fwded port 8080 the same way I fwded port 80. I also turned off Windows Firewall, in case it was blocking port 8080. Any theories why port 80 works but 8080 does not?

  Read the article

• Does Hotspot Shield hide my activity from my ISP?

  - by test

  Can Hotspot Shield make your activities invisible to your ISP? Or can they still see what you're downloading if they so choose? Here's the text from the product description: Hotspot Shield protects your entire web surfing session; securing your connection at both your home Internet network & Public Internet networks (both wired and wireless). Hotspot Shield protects your identity by ensuring that all web transactions (shopping, filling out forms, downloads) are secured through HTTPS. Hotspot Shield also makes you private online making your identity invisible to third party websites and ISP’s. I'm just not sure what it means by "invisible to third-party websites and ISPs" and if that means the ISP can still see what I'm doing.

  Read the article

• Dynamic DNS at freedns.afraid.org using a Fritz!Box

  - by kai

  I am having some trouble setting up Dynamic DNS with my Fritz!Box 7360. I have set up the Dynamic DNS page with (this is translated from German, so might be worded a bit differently): [x] Use dynamic DNS Dynamic DNS Provider: User defined Update-URL: https://freedns.afraid.org/dynamic/update.php?MY-DIRECT-URL-KEY Domain Name: mydomain.crabdance.com User Name: myusername Password: mypassword Now on the FritzBox status page, it says: Dynamic DNS: activated, mydomain.crabdance.com, Status: Account temprarily deactivated When I check back on http://freedns.afraid.org, my IP address never changes. Is there any way to fix this? Note my router is on an IPv6 network (m-net), with IPv4 only through DS-Lite. I'm not sure whether this affects anything. Update: Following the guide here (putting myusername instead of MY-DIRECT-URL-KEY) hasn't given any succes. However, the status field has changed slightly: Dynamic DNS: activated, mydomain.crabdance.com, Status: unknown

  Read the article

• OpenVPN slow with Firewall enabled on Zyxel ZyWall USG-100

  - by aleroot

  I have an OpenVPN server on a Linux machine, after installing a ZyWall USG-100 I'm experiencing extremely slowness navigating web servers on my remote LAN through the VPN connection, while accessing the web interface of the ZyWall is fast. I have configured everything : the Virtual Server for the OpenVPN Server, the static route as with the replaced router that I had before installing the ZyWall Today. I even added a rule to the firewall that allows connection to the OpenVPN Server machine : but navigation on the LAN through the VPN still slow, it seems that the Firewall is blocking packages, since if I disable the firewall on the USG-100 everything works fast as usual, while with the firewall enabled it is extremely slow. Why ? Do I need to add some other rule to the firewall to speed up ?

  Read the article

• WAMP, DD-WRT, Using DNSMasq to access multiple virtual hosts via aliases on local network

  - by christian

  I've updated my question to coincide with my progress I am attempting to configure WAMP on my development machine. I would like to use it in conjunction with DD-WRT's DNSMasq feature to access multiple virtual hosts via aliases (dev1.local,dev2.local,etc.) over my local wireless network. I have followed the following tutorial which allows me to setup virtual hosts and access on local network by ip addresses. http://www.logicspot.com/web-development-2/viewing-a-locally-hosted-website-with-your-smartphone/ I've got this up and running. For simplicity sake I'd still like to setup DNSMasq to connect via aliases. I have followed the following tutorial http://www.question-defense.com/2008/12/29/add-static-dns-entries-to-dd-wrt-router-firmware And the aliases load on my development machine, but I can not access via the aliases on my mobile devices connected to the local network. I can however access via IPs. Thanks for any help you can provide

  Read the article

• What are industry standards and professional best practices in network hosts naming? [closed]

  - by Ivan

  Possible Duplicate: Naming convention for computers It seems an important and difficult dilemma for me how to name network hosts (routers, servers (while a server can be a router and host diverse services at the same time), virtual machines (while they host important services and can migrate), workstations and notebooks (using pc-username is not the best idea as users may change), printers & MFUs, surveillance IP cameras, etc). Are there known and accepted best practices for this task? Excuse me if there already was a similar question here (I think it probably was), I haven't found it.

  Read the article

• ndiswrapper wlan driver installed, but wlan still does not work

  - by mugetsu

  I'm trying to get my Atheros AR1111 EB-WG PCI wireless adapter to work. Right now wifi is not even detected. I'm on ubuntu 12.04 64bit and I managed to find a xp64bit driver. I followed the exact steps here: https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper And where I do ndiswrapper -l I get something like : {name of driver} : driver installed device ({Chipset ID}) present which shows that the driver installed properly However, after I load the new module : sudo modprobe ndiswrapper nothing happens, and iwconfig shows that I still have no wlan. I tried to do dmseg | grep ndiswrapper, but there were no driver loading errors or anything strange. I also have blacklist ath5k, ath8k in /etc/modprobe.d/blacklist.conf What am I doing wrong? What could be causing this?

  Read the article

• Ad-hoc connection between iPhone and Macbook Pro

  - by Phil Nash

  I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

  Read the article

• Unidentified Connection in Compaq CQ61Windows7 OS on DSL cable network connection

  - by Mohammed Thouseef

  I have Dell studio with shared DSL internet connection my router is "NETGEAR DG834" & Network connection discription is "Broadcom netlink tm gigabit ethernet" this connection is working fine with dell laptop with Vista homepremium OS. My Question is? If i connect HPcompaq presario CQ61 in this connection it will automatically select Public network and display unidentified connection i tried several times but not suceeded its OS is Win7 home premium. but wireless networking is working fine only this problem is faceing with DSL cable connection when i diagnos the connection an error will generate "Local Area Connection does not have a valid IP configuration" in LAN Connection status window i noticed IPV4 & IPV6 Connectivity is showing "No Network Access" please can you clarify whats the problem.

  Read the article

• VPN for a small organization

  - by user24091

  I am in charge of a small office network that has < 10 users. I want to be able to offer them access to the network from their home internet connections. At the moment we have a regular ADSL-router-firewall to provide local network access and a fixed IP address. I know there are enterprise-level VPN solutions, but these obviously won't be available to us because of the cost and complexity. What small-scale solutions are around that you could recommend, what would we need to deploy on the client side, and what would the clients need to do to access the VPN? Simplicity and low cost need to be the keys here. Thanks

  Read the article

• HP Jetdirect 175x and HP Officejet K7103 printsharing

  - by Richard

  I have managed to get this setup working , but it is very unreliable and either the printserver or the printer seem to crash and wont respond after 1 or 2 prints, although I am able to still access the web config of the 175x. I had a similar problem with a linksys wireless print server with the same problem and assumed that a HP print server would do the job better...grrrr!! Anybody any ideas what to do next? It is not possible to flash the printserver, nor the printer as far as I know, so I assume I have some iffy settings in the print server config somewhre. All our users are W7 or Vista BTW. Cheers Richard

  Read the article

• How to set up a SSH tunnel and/or reverse SSH tunnel?

  - by bossytoe

  I'm located in Shanghai China and am trying to set up an SSH tunnel (or a reverse ssh tunnel?) to my brother's server located in the States. I'm using windows xp and he has a mac. We are both using wireless routers (not sure if this is relevant). He's given me the address and password (for his server, I think), and I've downloaded myentunnel (which he recommended), but am not sure what to do now. I've also downloaded the foxyproxy add-on for mozilla (my preferred browser), and am hoping there is someone out there who can help guide a newbie like me! Thanks in advance.

  Read the article

• Airport Extreme roaming setup

  - by Daniel Johansson

  We've got three Apple AirPort extremes and want to setup them as a roaming wlan network on my company. My question is what's the correct setup for this? All three AP:s is supposed to create the same wireless network "MyWlan" and we want roaming supoprt between them so that client can move from floor to floor without having to switch wlan or reconnect. We don't want to use any kind of DHCP or NAT on the AirPorts, only bridge mode. Do we connect the AirPorts to the lan/ethernet using the WAN port or one of the LAN ports? What's the correct settings in the config utility? Have one of the AirPorts create a network and setup the other two to extend the created network from AirPort 1 or have them all create the same network and set the same wlan password?

  Read the article

• How to hack airport extreme to support USB 3G modem?

  - by Mike Caron

  Has anyone out there ever tried to hack the Airport Extreme, specifically with regard to the USB port? There are many cellular routers available that provide WiFi sharing of a USB modem link. However, instead of buying yet another router, I'd like to use my expensive Airport Extreme with it. The AE has a USB port on the back, but it's been said that it only talks to printers. Is there a way to hack the USB driver on the AE to allow it to recognize a USB modem, then use that as the connectivity instead of the LAN? I would imagine that one could use OpenFirmware to boot something on the AE. If one can boot it, then one could provide access using SSH across the lan. Once access is granted, then let the hacking begin... but I don't know how to (a) get the mini-osx on to USB (is it the same as the ATV without a UI?) or (b) how to load up certain things once boot has begun.

  Read the article

• Loadbalancing outbound traffic while using openbgpd on freebsd

  - by Rajkumar S

  Hi, I am using openbgpd in freeBSD with 2 ISP connections. I have my own AS number and a /22 network. Currently I am advertising entire /22 to both networks. Inbound traffic comes in But my outbound traffic goes via a single link. I would like to either distribute my outbound traffic via both links so that outbound traffic is also load balanced. How to configure this using openbgpd in freebsd? My current openbgpd config is attached for reference. AS 00my-as listen on xx.xx.xx.x router-id xx.xx.xx.x network aa.aa.aa.0/22 group "ISP1" { remote-as 11remoteas-1 neighbor bb.bb.bb.1 { descr "ISP1" announce all } } group "ISP2" { remote-as 22remoteas-2 neighbor cc.cc.cc.37 { descr "ISP2" announce all } } deny from any deny to any allow from bb.bb.bb.1 allow to bb.bb.bb.1 allow from cc.cc.cc.37 allow to cc.cc.cc.37

  Read the article

• Can't ping host from vmware guest using bridged networking

  - by user199421

  Host is Windows 7 Guest is Ubuntu 11.04 Network adapter is wireless I can ping other computers on the network but not the host. No firewall are involved. Sniffing the traffic with wireshark it looks like both the host and the guest are using the same MAC address. My guest simply doesn't receive a reply when asking for 192.168.1.101 (the host) My router has no problem giving both of them different IP addresses but maybe duplicate MAC address is the problem? It seems logical that both will have the same MAC address (from the host point of view) but it strange that there is no work around for this because otherwise I don't see how the host and guess are supposed to communicate.

  Read the article

• dns service on OS X Snow Leopard Server

  - by Sorin Buturugeanu

  Hello all, I have a Mac Mini (1.83GHz, 1.5 RAM) with a fresh install of OS X Snow Leopard Server and I want to use it for DNS and web hosting. What I have done so far is to go to the domain registrar and configure a new nameserver (ns.domain.tld) to point to my static IP. This Mac Mini is behind a DI-524 router and I have forwarded ports 53 and 80 to the Mini. I have also added the domain name to the DNS configuration pannel (as in the attachment), but intodns.com gives the following error (among others, and obviously the site is not working): "Mismatched NS records WARNING: One or more of your nameservers did not return any of your NS records." I don't know where to go from here .. Thank you to anyone willing to take the time to give me a hint!! seems that I can't post images but here's the link: http://i.imgur.com/zWI7Y.png

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >