Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 217/286 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

• Why isn't Synergy working for me?

  - by Anthony

  It worked for about a week then stopped working. I'm trying to make it work between a Windows 7 laptop and a Windows XP laptop. My router is a Linksys E1000. I tried uninstalling and reinstalling the program multiple times. I've tried port forwarding. I've tried making exceptions in the firewall. I've tried disabling the firewalls. It might be relevant also that Input Director doesn't work either. What am I doing wrong?

  Read the article

• Can I get an adapter for usb 3.0 to gigabit, or a gigabit switch with usb 3.0?

  - by techaddict

  Basically I want to be able to attach USB 3.0 external portable hard drives to my network and maintain at least gigabit speeds. I can think of four ways to do this, two of which I know exist: 1) NAS - get an NAS which features USB 3.0 and gigabit 2) Gigabit router with a USB 3.0 port and I want to know if these two exist: 3) gigabit switch (multiple gigabit ports) with at least one USB 3.0 port 4) USB 3.0 to gigabit adapter The gigabit adapter would be similar to this: http://www.addonics.com/products/nas30u2.php except that that is only USB 2.0 so it is not true gigabit, as gigabit is 125MBps but USB 2.0 is only 60MBps, so that adapter only has a maximum transfer speed of 60MBps and the "gigabit" is practically useless.

  Read the article

• configuration transfer over scp on commit not working on Juniper EX-2200 switch

  - by liv2hak

  I am making a series of configuration changes on Junos EX- 2200 switch.I have this router connected to another PC via an ethernet cable.The IP address of the switch is 192.168.1.1.I am able to ping from 192.168.1.1 to 192.168.1.0 and vice-versa. After the changes I make I do the following commands set system archival configuration transfer-on-commit set system archival configuration archive-sites "scp://[email protected]:/home/karthik/ws_karthik/sw1_config_1.txt" password godfather commit Where there is a user with user-name "karthik " and password "godfather".The path shown above also exists in the system How ever I don't see the configuration file sw1_config_1.txt created at the path specified. Also I have verified that sshd is running on the PC (192.168.1.10) Am I doing something wrong here? It would be great if anyone could help me out.

  Read the article

• Mule xml to soap problem

  - by kevfuzz

  Hi, I'm not sure if there many Mule users on here but I'm hoping someone might be able to help me! I'm having a problem calling a webservice from Mule using Axis. I've created a fairly simple example where I have xml in a file being read by Mule, it's then transformed into a Document and sent to the webservice. The relevant code in the mule config looks like this: <inbound> <file:inbound-endpoint path="./files/initial" transformer-refs="FileToString xmlToDom" connector-ref="fileConnector" /> </inbound> <outbound> <pass-through-router> <axis:outbound-endpoint address="http://localhost:8081/holidayService?method=echoXXXX" synchronous="true" style="DOCUMENT" use="LITERAL" /> </pass-through-router> </outbound> However the call for the webservice fails as the above config is generating a SOAP message with an tag just after the tag and closes it just before the tag. The generated SOAP message looks like this: POST /holidayService?method=echoXXXX HTTP/1.1 Content-Type: text/xml X-MULE_ENDPOINT: http://localhost:8081/holidayService?method=echoXXXX SOAPAction: http://localhost:8081/holidayService?method=echoXXXX directory: D:\bea\weblogic92\samples\domains\wl_server\files\processed filename: HolidayRequest.xml method: echoXXXX originalFilename: HolidayRequest.xml style: document use: literal User-Agent: Jakarta Commons-HttpClient/3.1 Host: 127.0.0.1:8081 Content-Length: 1183 <?xml version="1.0" encoding="UTF-8"?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <soapenv:Header> <mule:header soapenv:actor="http://www.muleumo.org/providers/soap/1.0" soapenv:mustUnderstand="0" xmlns:mule="http://www.muleumo.org/providers/soap/1.0"> <mule:MULE_CORRELATION_ID>D:\bea\weblogic92\samples\domains\wl_server\files\processed\HolidayRequest.xml</mule:MULE_CORRELATION_ID> <mule:MULE_CORRELATION_GROUP_SIZE>-1</mule:MULE_CORRELATION_GROUP_SIZE> <mule:MULE_CORRELATION_SEQUENCE>-1</mule:MULE_CORRELATION_SEQUENCE> </mule:header> </soapenv:Header> <soapenv:Body> <value0 xsi:type="ns1:DocumentImpl" xmlns="" xmlns:ns1="http://dom.internal.xerces.apache.org.sun.com"> <sch:HolidayRequest xmlns:sch="http://mycompany.com/hr/schemas"> <sch:Holiday> <sch:StartDate>2009-08-13</sch:StartDate> <sch:EndDate>1988-12-12</sch:EndDate> </sch:Holiday> <sch:Employee> <sch:Number>3434</sch:Number> <sch:FirstName>John</sch:FirstName> <sch:LastName>Smith</sch:LastName> </sch:Employee> </sch:HolidayRequest> </value0> </soapenv:Body> </soapenv:Envelope> The webservice works fine in SOAPUI without the tag and from what I've read on the Mule website I don't know why it's being inserted. Any help would be much appreciated, Kevin.

  Read the article

• Connectivity good between VMs, but no connectivity between host and VM

  - by Greg Sansom

  I have a strange situation where connectivity (ie ping, access shared folders and services) is fine between virtual machines, but not between the host and the virtuals. I've been using Hyper-V almost every day for years and have never had a problem like this. Note the following: The host machine and all virtuals are running Windows Server 2008 r1. All machines can connect to the web, and the gateway router. Subnet mask and gateway reported in ipconfig are identical for all machines. I can access virtuals via the Hyper-V snap-in only. Doea anyone have suggestions about what might be wrong, or what diagnostic steps I can take?

  Read the article

• Google images sometimes terribly slow when using dnsmasq

  - by Joril

  Hi everyone! I am the admin of a small LAN of 10+ computers. I've set up a dnsmasq server for DHCP and DNS resolution, and it's working almost fine.. My problem is that when I try to use Google images, sometimes it takes ages to show the actual images. I get just the textual part of the page (menus and so on) while the images themselves are shown as the still-loading-white boxes.. When I use the DSL router directly as DNS, the site works fine all the time. The problem sometimes presents itself with Google maps too.. The map takes ages to load. Any idea on what I could try to troubleshoot this? (dnsmasq 2.47 on CentOS 5.2 64bit, our outside connection is an asymmetrical 4Mbps DSL)

  Read the article

• Google images sometimes terribly slow when using dnsmasq

  - by Joril

  Hi everyone! I am the admin of a small LAN of 10+ computers. I've set up a dnsmasq server for DHCP and DNS resolution, and it's working almost fine.. My problem is that when I try to use Google images, sometimes it takes ages to show the actual images. I get just the textual part of the page (menus and so on) while the images themselves are shown as the still-loading-white boxes.. When I use the DSL router directly as DNS, the site works fine all the time. The problem sometimes presents itself with Google maps too.. The map takes ages to load. Any idea on what I could try to troubleshoot this? (dnsmasq 2.47 on CentOS 5.2 64bit, our outside connection is an asymmetrical 4Mbps DSL)

  Read the article

• Cant route VLAN over VPN between Cisco ASA 5505 and Cisco 870

  - by user60984

  We've had an existing VPN between a 5505 and 870 for some time. We've just added VLANs to the network on the 5505 side. We can't seem to figure out how to get devices on the VLANs to communicate with devices on the 870 network which have no VLANs. We're thinking we might have to use a router of sorts to handle the routing before hitting the ASA. We thought PFsense might work well. We've been banging our heads against this thing for 2 days so any immediate help would be great. We're up against a deadline. Thanks!!!

  Read the article

• SMTP Server Times Out for 1 of 2 ISPs

  - by Jonathan Sampson

  For months I've been using a 5g sprint card for my laptop to check email. I have gmail, and three other accounts all configured in Thunderbird. Recently, I got AT&T internet service at my house and I discovered that I cannot send email when connected to my home service. I can receive just fine, but I can't send. If I plugin my 5g card, I can sent/receive with no problems. At home I'm connected wirelessly through a router. What could be causing this interruption? I even tried pinging my smtp server only to see it timeout when connected via AT&T. If more details are needed, I'll be happy to share.

  Read the article

• QoS - split bandwidth across all IPs during high load

  - by Matthew Iselin

  We have a Linux-based router which is currently working fairly well, but our network only has a 1.5 mbps incoming connection. The network is small, but during high load periods some systems can end up dominating the bandwidth. For example, a client downloading a file can easily saturate the connection leaving everyone else with barely any access to the outside world. Naturally, I'd like to fix this. I believe a combination of iptables rules and tc is in order, but I have no idea how to go about distributing the bandwidth evenly across the clients. It would be nice if there was a way to divide the bandwidth only across clients that are actually utilising the connection as well, rather than hard limit each connection to (bandwidth / number of clients).

  Read the article

• can't resolve host (A) but FQDN is fine

  - by user1431356

  I am getting inconsistent name resolution locally with DNS I have 3 2012 Standard servers and some weirdness on 1. It is a standard install with IIS role added. TEST01 is a dev server. 192.119.1.220 with a host header of TEST01. DATA01 runs internal DNS on .240 and all servers and clients point here for DNS. There is a forward in DNS to 192.119.1.1 (router) with ISP external DNS #s mapped. if I ping TEST01 from a non AD machine, it I get "Could not find Host TEST01" If I ping TEST01 from a domain machine(another server), it resolves the IP but does not respond. if I ping TEST01.AD.local, DNS resolves the IP, but times out. I can access IIS by entering http://test.WWWDOMAIN.com and I can RDP to it, just not ping. Any idea where I should start?

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• Bonjour/mDNS Broadcast across subnets

  - by Matthew Savage

  I have just setup a new OSX Server in our office and verified that everything is working fine over our wired network (192.168.126.0/24). The problem that I am having is that our clients (Mac Laptops) are mainly connected via Wireless, which are running on a different subnet (192.168.1.0/24), and the mDNS Broadcast isn't reaching this subnet. The network configuration is somewhat foreign to myself (I don't manage the network in this location, but as of just recently the servers), however I don't believe there is any firewalls or routing rules between the two subnets which might cause the traffic to be rejected. I'm wondering if this is simply the mDNS broadcast not able to broadcast over the two different subnets (I'm still reading up on broadcast to understand it more) or there is something else which I might be able to try.

  Read the article

• RRAS server 2003 one nic vpn encrypted

  - by Daniel Woodhead

  Hi All, I have a a machine installed with Server 2003 standard on it. It is behind a standard adsl router. I have setup RRAS access on it with under the custom setting and selected just vpn as the machine only has one nic installed. I can connect to the server and it all works fine. I'm just wondering where the settings are to say that it is data encrypted. I know in xp when setting up a vpn you can check the option to encrypt the data, but doing this in server 2003 there isn't the option so thought i would try and use rras. The main reason that i want to do this is that xp only allows one connection at a time. Dan

  Read the article

• Forwarding MySQL connection with iptables and differents network interfaces

  - by Emilio Nicolás

  I have a PC with Ubuntu as a router. It has a 3G connection with a public IP to the Internet, and there is a private wireless subnet. So it has two active interfaces: ppp0: public IP (WAN) wlan0: private IP (LAN) With iptables I wannt to forward every MySQL connection (port 3306) to a local machine (10.42.43.10) of the subnet. I type these iptables commands: iptables -A PREROUTING -t nat -i ppp0 -p tcp --dport 3306 -j DNAT --to 10.42.43.10:3306 iptables -A FORWARD -p tcp -i ppp0 -o wlan0 -d 10.42.43.10 --dport 3306 -j ACCEPT But it doesn't work. telnet publicip 3306 fails :-( Any help will be appreciated. Thanks!

  Read the article

• Help changing MAC address in Windows 7 [closed]

  - by Niphoet

  Possible Duplicate: Change MAC Address I need to change the MAC address of my wireless adapter in Windows 7 (Ultimate RTM). I used to do this in XP both directly in the registry editor and with a .REG file I wrote. I have used each of these methods in Windows 7, as well as a few tools I found that are supposed to do this. Every time I change it, I disable and re-enable the network adapter in control panel, but upon running ipconfig /all it still shows my old MAC address. Any help? By the way, I do have Administrative Rights and UAC turned off.

  Read the article

• Excel 2003 opening files on network

  - by Luke

  The network is laid out with an XP Pro computer as the server hosting files, then 3 XP computers connecting to it for filesharing, all on it's own router. One computer can open .xls files no problem, and she runs Office XP. The other two computers run Office 2003, and cannot open any shared files by double-clicking them, or by selecting File-Open in Excel. If the file gets copied to the local computer, it opens instantly. I have tried disabling the AV on all computers, disabling the Windows firewall, and doublechecking permissions on the server. I have also tried disabling DDE, but that doesn't help at all, just like Tools-Options-unticking Ignore other applications. Any ideas? This apparently started a couple days ago

  Read the article

• Always a path to the internet even in Windows SBS is off

  - by Mark

  Hello all, is it possible to have a configuration in a Windows 2003 SBS environment where in the event that the SBS box crashed/turned off/ or is being worked on that there can still exist a path to the internet for domain users and visitors to still use? I would like to have the standalone router issue DHCP IPs. The primary DNS would point to the SBS, the secondary wouuld point to the ISP DNS Server. My theory was that if someone was using the internet and the SBS box went down they wouldn't be able to access the network shares but still be able to use the internet. (We are moving everything into the clouds with Google Apps Non-Profit) Does this seem like a reasonable configuration? Or are they're pitfalls that I will fall into? Thanks Mark

  Read the article

• Cable Internet connectivity Problem?

  - by LightHeaded

  I just got Internet cable from Time Warner/ EarthLink. For some reason I tried everything that Time Warner and Earthlink techs told me to do but nothing seems to work. I still can't connect to the Internet. For some reason they think it's the IPv4 address since it begins with 169. I did everything the told me to 8 times, but they both give me the run around tell me it's the other's fault. How can I fix this once and for all? I have no router. I use cable to connect to the Internet. Windows Vista Cable broadband.

  Read the article

• Sharing laptop's internal optical drive running windows XP Media Center Edition with Netbook running

  - by Col

  just got a new HP netbook with no optical drive and guide said I should be able to share the optical drive of another windows computer. The netbook is running Windows 7 and the laptop, also HP, with the internal optical drive is running Windows XP Media Center Edition. I have wireless network that both the laptop and netbook access without a problem. The instructions did not seem to work in my case. When I right clicked on Properties of the optical drive and went to the Sharing tab, there was no selction for Advanced Sharing as the instructions said. XP made me go to Network wizard and set up a network, (which I already had). After doing that I could not access the drive from Windows 7. Has anyone benn able to do this?

  Read the article

• Windows 7 port Forwarding Issue

  - by Elliot

  I can't get port forwarding to work now that I am using windows 7 (64-bit). I am using a wireless connection (no wired connection available). I have the ports forwarded (IP has been double checked, router settings are confirmed), there is an exception for all of the programs in question in windows firewall, and in the resource monitor windows lists the ports as available, not restricted, and yet when I either use a specific program (ie utorrent, DC++, Command & Conquer 3) or check using firefox, the port reads as closed. How do I get the port forwarding to work?

  Read the article

• Static IPv6 address advertising and IPv6 autoconfig in Debian/Ubuntu

  - by Pascal

  I have a network that advertises IPv6 addresses through IPv6 autoconfig. To allow DNS lookups and to have fancy IP addresses, we setup "static" IPv6 addresses through /etc/network/interfaces: auto eth0 iface eth0 inet dhcp iface eth0 inet6 static address a:b:c:d:e::f netmask 64 Whenever we now connect through IPv6 Linux uses the IPv6 autoconfig address: a:b:c:d:21d:60ff:fe4a:479 and not the static IPv6 address: a:b:c:d:e::f A server on the other side only sees the autoconfig address. Is there a way to force linux (Debian/Ubuntu) to use the static address for outgoing packets? This is especially interesting for reverse DNS and firewall settings. I don't want to disable the IPv6 autoconfig since I don't have control over the settings the router advertises.

  Read the article

• Can't connect to a share.

  - by AngryHacker

  Hello, I have a laptop with a Windows XP Tablet Edition installed. I have several users setup on the laptop (mostly me and my kids). When I try to connect to its administrative share via \DadLaptop\c$ from a Windows 2000 Professional machine, it prompts me for a user name and password. However, after I enter it, it always tells me "incorrect password or unknown username". As a test I setup another share, called "test" and tried to connect to that. It worked fine, didn't even ask me for a password, just connected to it and that's that. All the networking is wireless. I am connecting with an admin account (admin on the target computer). What am I missing? Why can't I connect to an administrative share?

  Read the article

• Ubuntu not connecting to network in Hyper-V

  - by soandos

  I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

  Read the article

• how do I tether my computer and blackberry?

  - by el chief

  I have Windows 7 Home Premium Blackberry Curve 9300 6.0 bundle 1478 (v6.0.0.380, platform 6.6.0.86) desktop software 6.0.0.380 I was able to connect with desktop software version 5 but 6 does not work. I am able to connect to the internet just fine with the device itself (ie can browse the web). How can I debug this? update: here's the error message: when i try to connect i get the message "failed to start mobile internet. the specified port is not open. please check your profile settings and make sure your radio is turned on. this service might also have been turned off by your wireless service provider or your administrator"

  Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >