Search Results

Search found 16891 results on 676 pages for 'custom cell'.

Page 218/676 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

  • MySQL - Installation

    - by Stuart Brierley
    In order to create a development environment for a project I am working on, I recently needed to install MySQL Server.  The first step was to download the msi. Running this presents you with the installer splash screen, detailing the version of MySQL that you are about to install - in this case MySQL Server 5.1. Next you can choose whether to install a Typical, Complete or Custom installation.  Although this is the first time I have installed MySQL and the Custom option states "Recommended for advanced users" I opted to carry out a Custom installation, specifically so that I could be sure of what features and components were installed. On the Custom Setup screen you can choose which components to install.  By default the Developer Components are not included, but I opted to include some of these elements. Next up is the ready to install screen and then the intsallation progress.   Following the completion of the installation you are shown a few screens with details of the MySQL Enterprise subscription option. Finally the installation is complete and you are offered the chance to configure and register MySQL. Next I will be looking at the configuration of MySQL Server 5.1.

    Read the article

  • Announcing: Great Improvements to Windows Azure Web Sites

    - by ScottGu
    I’m excited to announce some great improvements to the Windows Azure Web Sites capability we first introduced earlier this summer.  Today’s improvements include: a new low-cost shared mode scaling option, support for custom domains with shared and reserved mode web-sites using both CNAME and A-Records (the later enabling naked domains), continuous deployment support using both CodePlex and GitHub, and FastCGI extensibility.  All of these improvements are now live in production and available to start using immediately. New “Shared” Scaling Tier Windows Azure allows you to deploy and host up to 10 web-sites in a free, shared/multi-tenant hosting environment. You can start out developing and testing web sites at no cost using this free shared mode, and it supports the ability to run web sites that serve up to 165MB/day of content (5GB/month).  All of the capabilities we introduced in June with this free tier remain the same with today’s update. Starting with today’s release, you can now elastically scale up your web-site beyond this capability using a new low-cost “shared” option (which we are introducing today) as well as using a “reserved instance” option (which we’ve supported since June).  Scaling to either of these modes is easy.  Simply click on the “scale” tab of your web-site within the Windows Azure Portal, choose the scaling option you want to use with it, and then click the “save” button.  Changes take only seconds to apply and do not require any code to be changed, nor the app to be redeployed: Below are some more details on the new “shared” option, as well as the existing “reserved” option: Shared Mode With today’s release we are introducing a new low-cost “shared” scaling mode for Windows Azure Web Sites.  A web-site running in shared mode is deployed in a shared/multi-tenant hosting environment.  Unlike the free tier, though, a web-site in shared mode has no quotas/upper-limit around the amount of bandwidth it can serve.  The first 5 GB/month of bandwidth you serve with a shared web-site is free, and then you pay the standard “pay as you go” Windows Azure outbound bandwidth rate for outbound bandwidth above 5 GB. A web-site running in shared mode also now supports the ability to map multiple custom DNS domain names, using both CNAMEs and A-records, to it.  The new A-record support we are introducing with today’s release provides the ability for you to support “naked domains” with your web-sites (e.g. http://microsoft.com in addition to http://www.microsoft.com).  We will also in the future enable SNI based SSL as a built-in feature with shared mode web-sites (this functionality isn’t supported with today’s release – but will be coming later this year to both the shared and reserved tiers). You pay for a shared mode web-site using the standard “pay as you go” model that we support with other features of Windows Azure (meaning no up-front costs, and you pay only for the hours that the feature is enabled).  A web-site running in shared mode costs only 1.3 cents/hr during the preview (so on average $9.36/month). Reserved Instance Mode In addition to running sites in shared mode, we also support scaling them to run within a reserved instance mode.  When running in reserved instance mode your sites are guaranteed to run isolated within your own Small, Medium or Large VM (meaning no other customers run within it).  You can run any number of web-sites within a VM, and there are no quotas on CPU or memory limits. You can run your sites using either a single reserved instance VM, or scale up to have multiple instances of them (e.g. 2 medium sized VMs, etc).  Scaling up or down is easy – just select the “reserved” instance VM within the “scale” tab of the Windows Azure Portal, choose the VM size you want, the number of instances of it you want to run, and then click save.  Changes take effect in seconds: Unlike shared mode, there is no per-site cost when running in reserved mode.  Instead you pay only for the reserved instance VMs you use – and you can run any number of web-sites you want within them at no extra cost (e.g. you could run a single site within a reserved instance VM or 100 web-sites within it for the same cost).  Reserved instance VMs start at 8 cents/hr for a small reserved VM.  Elastic Scale-up/down Windows Azure Web Sites allows you to scale-up or down your capacity within seconds.  This allows you to deploy a site using the shared mode option to begin with, and then dynamically scale up to the reserved mode option only when you need to – without you having to change any code or redeploy your application. If your site traffic starts to drop off, you can scale back down the number of reserved instances you are using, or scale down to the shared mode tier – all within seconds and without having to change code, redeploy, or adjust DNS mappings.  You can also use the “Dashboard” view within the Windows Azure Portal to easily monitor your site’s load in real-time (it shows not only requests/sec and bandwidth but also stats like CPU and memory usage). Because of Windows Azure’s “pay as you go” pricing model, you only pay for the compute capacity you use in a given hour.  So if your site is running most of the month in shared mode (at 1.3 cents/hr), but there is a weekend when it gets really popular and you decide to scale it up into reserved mode to have it run in your own dedicated VM (at 8 cents/hr), you only have to pay the additional pennies/hr for the hours it is running in the reserved mode.  There is no upfront cost you need to pay to enable this, and once you scale back down to shared mode you return to the 1.3 cents/hr rate.  This makes it super flexible and cost effective. Improved Custom Domain Support Web sites running in either “shared” or “reserved” mode support the ability to associate custom host names to them (e.g. www.mysitename.com).  You can associate multiple custom domains to each Windows Azure Web Site.  With today’s release we are introducing support for A-Records (a big ask by many users). With the A-Record support, you can now associate ‘naked’ domains to your Windows Azure Web Sites – meaning instead of having to use www.mysitename.com you can instead just have mysitename.com (with no sub-name prefix).  Because you can map multiple domains to a single site, you can optionally enable both a www and naked domain for a site (and then use a URL rewrite rule/redirect to avoid SEO problems). We’ve also enhanced the UI for managing custom domains within the Windows Azure Portal as part of today’s release.  Clicking the “Manage Domains” button in the tray at the bottom of the portal now brings up custom UI that makes it easy to manage/configure them: As part of this update we’ve also made it significantly smoother/easier to validate ownership of custom domains, and made it easier to switch existing sites/domains to Windows Azure Web Sites with no downtime. Continuous Deployment Support with Git and CodePlex or GitHub One of the more popular features we released earlier this summer was support for publishing web sites directly to Windows Azure using source control systems like TFS and Git.  This provides a really powerful way to manage your application deployments using source control.  It is really easy to enable this from a website’s dashboard page: The TFS option we shipped earlier this summer provides a very rich continuous deployment solution that enables you to automate builds and run unit tests every time you check in your web-site, and then if they are successful automatically publish to Azure. With today’s release we are expanding our Git support to also enable continuous deployment scenarios and integrate with projects hosted on CodePlex and GitHub.  This support is enabled with all web-sites (including those using the “free” scaling mode). Starting today, when you choose the “Set up Git publishing” link on a website’s “Dashboard” page you’ll see two additional options show up when Git based publishing is enabled for the web-site: You can click on either the “Deploy from my CodePlex project” link or “Deploy from my GitHub project” link to walkthrough a simple workflow to configure a connection between your website and a source repository you host on CodePlex or GitHub.  Once this connection is established, CodePlex or GitHub will automatically notify Windows Azure every time a checkin occurs.  This will then cause Windows Azure to pull the source and compile/deploy the new version of your app automatically.  The below two videos walkthrough how easy this is to enable this workflow and deploy both an initial app and then make a change to it: Enabling Continuous Deployment with Windows Azure Websites and CodePlex (2 minutes) Enabling Continuous Deployment with Windows Azure Websites and GitHub (2 minutes) This approach enables a really clean continuous deployment workflow, and makes it much easier to support a team development environment using Git: Note: today’s release supports establishing connections with public GitHub/CodePlex repositories.  Support for private repositories will be enabled in a few weeks. Support for multiple branches Previously, we only supported deploying from the git ‘master’ branch.  Often, though, developers want to deploy from alternate branches (e.g. a staging or future branch). This is now a supported scenario – both with standalone git based projects, as well as ones linked to CodePlex or GitHub.  This enables a variety of useful scenarios.  For example, you can now have two web-sites - a “live” and “staging” version – both linked to the same repository on CodePlex or GitHub.  You can configure one of the web-sites to always pull whatever is in the master branch, and the other to pull what is in the staging branch.  This enables a really clean way to enable final testing of your site before it goes live. This 1 minute video demonstrates how to configure which branch to use with a web-site. Summary The above features are all now live in production and available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. We’ll have even more new features and enhancements coming in the weeks ahead – including support for the recent Windows Server 2012 and .NET 4.5 releases (we will enable new web and worker role images with Windows Server 2012 and .NET 4.5 next month).  Keep an eye out on my blog for details as these new features become available. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • Sharing authentication methods across API and web app

    - by Snixtor
    I'm wanting to share an authentication implementation across a web application, and web API. The web application will be ASP.NET (mostly MVC 4), the API will be mostly ASP.NET WEB API, though I anticipate it will also have a few custom modules or handlers. I want to: Share as much authentication implementation between the app and API as possible. Have the web application behave like forms authentication (attractive log-in page, logout option, redirect to / from login page when a request requires authentication / authorisation). Have API callers use something closer to standard HTTP (401 - Unauthorized, not 302 - Redirect). Provide client and server side logout mechanisms that don't require a change of password (so HTTP basic is out, since clients typically cache their credentials). The way I'm thinking of implementing this is using plain old ASP.NET forms authentication for the web application, and pushing another module into the stack (much like MADAM - Mixed Authentication Disposition ASP.NET Module). This module will look for some HTTP header (implementation specific) which indicates "caller is API". If the header "caller is API" is set, then the service will respond differently than standard ASP.NET forms authentication, it will: 401 instead of 302 on a request lacking authentication. Look for username + pass in a custom "Login" HTTP header, and return a FormsAuthentication ticket in a custom "FormsAuth" header. Look for FormsAuthentication ticket in a custom "FormsAuth" header. My question(s) are: Is there a framework for ASP.NET that already covers this scenario? Are there any glaring holes in this proposed implementation? My primary fear is a security risk that I can't see, but I'm similarly concerned that there may be something about such an implementation that will make it overly restrictive or clumsy to work with.

    Read the article

  • Simultaneous AI in turn based games

    - by Eduard Strehlau
    I want to hack together a roguelike. Now I thought about entity and world representation and got to a quite big problem. If you want all the AI to act simultaneously you would normally(in cellular automa for examble) just copy the cell buffer and let all action of indiviual cells depend on the copy. Actions which are not valid anymore after some cell before the cell you are currently operating on changed the original enviourment(blocking the path) are just ignored or reapplied with the "current"(between turns) environment. After all cells have acted you copy the current map to the buffer again. Now for an environment with complex AI and big(datawise) entities the copying would take too long. So I thought you could put every action and entity makes into a que(make no changes to the environment) and execute the whole que after everyone took their move. Every interaction on this que are realy interacting entities, so if a entity tries to attack another entity it sends a message to it, the consequences of the attack would be visible next turn, either by just examining the entity or asking the entity for data. This would remove problems like what happens if an entity dies middle in the cue but got actions or is messaged later on(all messages would go to null, and the messages from the entity would either just be sent or deleted(haven't decided yet) But what would happen if a monster spawns a fireball which by itself tracks the player(in the same turn). Should I add the fireball to the enviourment beforehand, so make a change to the environment before executing the action list or just add the ball to the "need updated" list as a special case so it doesn't exist in the environment and still operates on it, spawing after evaluating the action list? Are there any solutions or papers on this subject which I can take a look at? EDIT: I don't need information on writing a roguelike I need information on turn based ai in respective to a complex enviourment.

    Read the article

  • E.T. Phone "Home" - Hey I've discovered a leak..!

    - by Martin Deh
    Being a member of the WebCenter ATEAM, we are often asked to performance tune a WebCenter custom portal application or a WebCenter Spaces deployment.  Most of the time, the process is pretty much the same.  For example, we often use tools like httpWatch and FireBug to monitor the application, and then perform load tests using JMeter or Selenium.  In addition, there are the fine tuning of the different performance based tuning parameters that are outlined in the documentation and by blogs that have been written by my fellow ATEAMers (click on the "performance" tag in this ATEAM blog).  While performing the load test where the outcome produces a significant reduction in the systems resources (memory), one of the causes that plays a role in memory "leakage" is due to the implementation of the navigation menu UI.  OOTB in both JDeveloper and WebCenter Spaces, there are sample (page) templates that include a "default" navigation menu.  In WebCenter Spaces, this is through the SpacesNavigationModel taskflow region, and in a custom portal (i.e. pageTemplate_globe.jspx) the menu UI is contructed using standard ADF components.  These sample menu UI's basically enable the underlying navigation model to visualize itself to some extent.  However, due to certain limitations of these sample menu implementations (i.e. deeper sub-level of navigations items, look-n-feel, .etc), many customers have developed their own custom navigation menus using a combination of HTML, CSS and JQuery.  While this is supported somewhat by the framework, it is important to know what are some of the best practices in ensuring that the navigation menu does not leak.  In addition, in this blog I will point out a leak (BUG) that is in the sample templates.  OK, E.T. the suspence is killing me, what is this leak? Note: for those who don't know, info on E.T. can be found here In both of the included templates, the example given for handling the navigation back to the "Home" page, will essentially provide a nice little memory leak every time the link is clicked. Let's take a look a simple example, which uses the default template in Spaces. The outlined section below is the "link", which is used to enable a user to navigation back quickly to the Group Space Home page. When you (mouse) hover over the link, the browser displays the target URL. From looking initially at the proposed URL, this is the intended destination.  Note: "home" in this case is the navigation model reference (id), that enables the display of the "pretty URL". Next, notice the current URL, which is displayed in the browser.  Remember, that PortalSiteHome = home.  The other highlighted item adf.ctrl-state, is very important to the framework.  This item is basically a persistent query parameter, which is used by the (ADF) framework to managing the current session and page instance.  Without this parameter present, among other things, the browser back-button navigation will fail.  In this example, the value for this parameter is currently 95K25i7dd_4.  Next, through the navigation menu item, I will click on the Page2 link. Inspecting the URL again, I can see that it reports that indeed the navigation is successful and the adf.ctrl-state is also in the URL.  For those that are wondering why the URL displays Page3.jspx, instead of Page2.jspx. Basically the (file) naming convention for pages created ar runtime in Spaces start at Page1, and then increment as you create additional pages.  The name of the actual link (i.e. Page2) is the page "title" attribute.  So the moral of the story is, unlike design time created pages, run time created pages the name of the file will 99% never match the name that appears in the link. Next, is to click on the quick link for navigating back to the Home page. Quick investigation yields that the navigation was indeed successful.  In the browser's URL there is a home (pretty URL) reference, and there is also a reference to the adf.ctrl-state parameter.  So what's the issue?  Can you remember what the value was for the adf.ctrl-state?  The current value is 3D95k25i7dd_149.  However, the previous value was 95k25i7dd_4.  Here is what happened.  Remember when (mouse) hovering over the link produced the following target URL: http://localhost:8888/webcenter/spaces/NavigationTest/home This is great for the browser as this URL will navigate to the intended targer.  However, what is missing is the adf.ctrl-state parameter.  Since this parameter was not present upon navigation "within" the framework, the ADF framework produced another adf.ctrl-state (object).  The previous adf.ctrl-state basically is orphaned while continuing to be alive in memory.  Note: the auto-creation of the adf.ctrl state does happen initially when you invoke the Spaces application  for the first time.  The following is the line of code which produced the issue: <af:goLink destination="#{boilerBean.globalLogoURIInSpace} ... Here the boilerBean is responsible for returning the "string" url, which in this case is /spaces/NavigationTest/home. Unfortunately, again what is missing is adf.ctrl-state. Note: there are more than one instance of the goLinks in the sample templates. So E.T. how can I correct this? There are 2 simple fixes.  For the goLink's destination, use the navigation model to return the actually "node" value, then use the goLinkPrettyUrl method to add the current adf.ctrl-state: <af:goLink destination="#{navigationContext.defaultNavigationModel.node['home'].goLinkPrettyUrl}"} ... />  Note: the node value is the [navigation model id]  Using a goLink does solve the main issue.  However, since the link basically does a redirect, some browsers like IE will produce a somewhat significant "flash".  In a Spaces application, this may be an annoyance to the users.  Another way to solve the leakage problem, and also remove the flash between navigations is to use a af:commandLink.  For example, here is the code example for this scenario: <af:commandLink id="pt_cl2asf" actionListener="#{navigationContext.processAction}" action="pprnav">    <f:attribute name="node" value="#{navigationContext.defaultNavigationModel.node['home']}"/> </af:commandLink> Here, the navigation node to where home is located is delivered by way of the attribute to the commandLink.  The actual navigation is performed by the processAction, which is needing the "node" value. E.T. OK, you solved the OOTB sample BUG, what about my custom navigation code? I have seen many implementations of creating a navigation menu through custom code.  In addition, there are some blog sites that also give detailed examples.  The majority of these implementations are very similar.  The code usually involves using standard HTML tags (i.e. DIVS, UL, LI, .,etc) and either CSS or JavaScript (JQuery) to produce the flyout/drop-down effect.  The navigation links in these cases are standard <a href... > tags.  Although, this type of approach is not fully accepted by the ADF community, it does work.  The important thing to note here is that the <a> tag value must use the goLinkPrettyURL method of contructing the target URL.  For example: <a href="${contextRoot}${menu.goLinkPrettyUrl}"> The main reason why this type of approach is popular is that links that are created this way (also with using af:goLinks), the pages become crawlable by search engines.  CommandLinks are currently not search friendly.  However, in the case of a Spaces instance this may be acceptable.  So in this use-case, af:commandLinks, which would replace the <a>  (or goLink) tags. The example code given of the af:commandLink above is still valid. One last important item.  If you choose to use af:commandLinks, special attention must be given to the scenario in which java script has been used to produce the flyout effect in the custom menu UI.  In many cases that I have seen, the commandLink can only be invoked once, since there is a conflict between the custom java script with the ADF frameworks own scripting to control the view.  The recommendation here, would be to use a pure CSS approach to acheive the dropdown effects. One very important thing to note.  Due to another BUG, the WebCenter environement must be patched to BP3 (patch  p14076906).  Otherwise the leak is still present using the goLinkPrettyUrl method.  Thanks E.T.!  Now I can phone home and not worry about my application running out of resources due to my custom navigation! 

    Read the article

  • XNA CustomModelAnimationSample problem

    - by Mentoliptus
    I downloaded the official tutorial from:CustomModelAnimationSample It works fine but when I try to replicate it in my project, it fails to load the Tag property in my model. Is found that the probelm is in the line: skinnedModel = Content.Load<Model>("DudeWalk"); This line loads the model from the DudeWalk.fbx file and with the custom SkinnedModelProcessor. It loads the animations data in the model. After the line the Tag property is full. I stepped into the method and it went to the custom ModelData class. I copied everything from the projects CustomModelAnimationWindows and CustomModelAnimationPipeline to my solution and set all the references. I tried the same line of code and couldn't step in the method. It called the default method or model constructor and after the line the model's Tag propetry was null. I have to load the model through my custom SkinnedModelProcessor class, but how I tell the game to use this class? In the tutroail CustomModelClass the line is changed to: model = Content.Load<CustomModel>("tank"); So I assumed that I have to set the generic type to a custom model class, but the first example works without it. If anyone has some useful advice or some other helpful link, I'll be happy to try it.

    Read the article

  • Reference Data Management

    - by rahulkamath
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableColorfulListAccent2 {mso-style-name:"Colorful List - Accent 2"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:72; mso-style-unhide:no; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-tstyle-shading:#F8EDED; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:25; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; color:black; mso-themecolor:text1;} table.MsoTableColorfulListAccent2FirstRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:first-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#9E3A38; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themeshade:204; mso-tstyle-border-bottom:1.5pt solid white; mso-tstyle-border-bottom-themecolor:background1; color:white; mso-themecolor:background1; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2LastRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:last-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:white; mso-tstyle-shading-themecolor:background1; mso-tstyle-border-top:1.5pt solid black; mso-tstyle-border-top-themecolor:text1; color:#9E3A38; mso-themecolor:accent2; mso-themeshade:204; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2FirstCol {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:first-column; mso-style-priority:72; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2LastCol {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:last-column; mso-style-priority:72; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2OddColumn {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:odd-column; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#EFD3D2; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:63; mso-tstyle-border-top:cell-none; mso-tstyle-border-left:cell-none; mso-tstyle-border-bottom:cell-none; mso-tstyle-border-right:cell-none; mso-tstyle-border-insideh:cell-none; mso-tstyle-border-insidev:cell-none;} table.MsoTableColorfulListAccent2OddRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:odd-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#F2DBDB; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:51;} Reference Data Management Oracle Data Relationship Management (DRM) has always been extremely powerful as an Enterprise MDM solution that can help manage changes to master data in a way that influences enterprise structure, whether it be mastering chart of accounts to enable financial transformation, or revamping organization structures to drive business transformation and operational efficiencies, or mastering sales territories in light of rapid fire acquisitions that require frequent sales territory refinement, equitable distribution of leads and accounts to salespersons, and alignment of budget/forecast with results to optimize sales coverage. Increasingly, DRM is also being utilized by Oracle customers for reference data management, an emerging solution space that deserves some explanation. What is reference data? Reference data is a close cousin of master data. While master data may be more rapidly changing, requires consensus building across stakeholders and lends structure to business transactions, reference data is simpler, more slowly changing, but has semantic content that is used to categorize or group other information assets – including master data – and give them contextual value. The following table contains an illustrative list of examples of reference data by type. Reference data types may include types and codes, business taxonomies, complex relationships & cross-domain mappings or standards. Types & Codes Taxonomies Relationships / Mappings Standards Transaction Codes Industry Classification Categories and Codes, e.g., North America Industry Classification System (NAICS) Product / Segment; Product / Geo Calendars (e.g., Gregorian, Fiscal, Manufacturing, Retail, ISO8601) Lookup Tables (e.g., Gender, Marital Status, etc.) Product Categories City à State à Postal Codes Currency Codes (e.g., ISO) Status Codes Sales Territories (e.g., Geo, Industry Verticals, Named Accounts, Federal/State/Local/Defense) Customer / Market Segment; Business Unit / Channel Country Codes (e.g., ISO 3166, UN) Role Codes Market Segments Country Codes / Currency Codes / Financial Accounts Date/Time, Time Zones (e.g., ISO 8601) Domain Values Universal Standard Products and Services Classification (UNSPSC), eCl@ss International Classification of Diseases (ICD) e.g., ICD9 à IC10 mappings Tax Rates Why manage reference data? Reference data carries contextual value and meaning and therefore its use can drive business logic that helps execute a business process, create a desired application behavior or provide meaningful segmentation to analyze transaction data. Further, mapping reference data often requires human judgment. Sample Use Cases of Reference Data Management Healthcare: Diagnostic Codes The reference data challenges in the healthcare industry offer a case in point. Part of being HIPAA compliant requires medical practitioners to transition diagnosis codes from ICD-9 to ICD-10, a medical coding scheme used to classify diseases, signs and symptoms, causes, etc. The transition to ICD-10 has a significant impact on business processes, procedures, contracts, and IT systems. Since both code sets ICD-9 and ICD-10 offer diagnosis codes of very different levels of granularity, human judgment is required to map ICD-9 codes to ICD-10. The process requires collaboration and consensus building among stakeholders much in the same way as does master data management. Moreover, to build reports to understand utilization, frequency and quality of diagnoses, medical practitioners may need to “cross-walk” mappings -- either forward to ICD-10 or backwards to ICD-9 depending upon the reporting time horizon. Spend Management: Product, Service & Supplier Codes Similarly, as an enterprise looks to rationalize suppliers and leverage their spend, conforming supplier codes, as well as product and service codes requires supporting multiple classification schemes that may include industry standards (e.g., UNSPSC, eCl@ss) or enterprise taxonomies. Aberdeen Group estimates that 90% of companies rely on spreadsheets and manual reviews to aggregate, classify and analyze spend data, and that data management activities account for 12-15% of the sourcing cycle and consume 30-50% of a commodity manager’s time. Creating a common map across the extended enterprise to rationalize codes across procurement, accounts payable, general ledger, credit card, procurement card (P-card) as well as ACH and bank systems can cut sourcing costs, improve compliance, lower inventory stock, and free up talent to focus on value added tasks. Specialty Finance: Point of Sales Transaction Codes and Product Codes In the specialty finance industry, enterprises are confronted with usury laws – governed at the state and local level – that regulate financial product innovation as it relates to consumer loans, check cashing and pawn lending. To comply, it is important to demonstrate that transactions booked at the point of sale are posted against valid product codes that were on offer at the time of booking the sale. Since new products are being released at a steady stream, it is important to ensure timely and accurate mapping of point-of-sale transaction codes with the appropriate product and GL codes to comply with the changing regulations. Multi-National Companies: Industry Classification Schemes As companies grow and expand across geographies, a typical challenge they encounter with reference data represents reconciling various versions of industry classification schemes in use across nations. While the United States, Mexico and Canada conform to the North American Industry Classification System (NAICS) standard, European Union countries choose different variants of the NACE industry classification scheme. Multi-national companies must manage the individual national NACE schemes and reconcile the differences across countries. Enterprises must invest in a reference data change management application to address the challenge of distributing reference data changes to downstream applications and assess which applications were impacted by a given change.

    Read the article

  • Essbase - FormatString

    - by THE
    A look at the documentation for "Typed Measures" shows:"Using format strings, you can format the values (cell contents) of Essbase database members in numeric type measures so that they appear, for query purposes, as text, dates, or other types of predefined values. The resultant display value is the cell’s formatted value (FORMATTED_VALUE property in MDX). The underlying real value is numeric, and this value is unaffected by the associated formatted value."To actually switch ON the use of typed measures in general, you need to navigate to the outline properties: open outline select properties change "Typed Measures enable" to TRUE (click to enlarge) As an example, I created two additional members in the ASOSamp outline. - A member "delta Price" in the Measures (Accounts) Dimension with the Formula: ([Original Price],[Curr_year])-([Original Price],[Prev_year])This is equivalent to the Variance Formula used in the "Years" Dimension. - A member "Var_Quickview" in the "Years" Dimension with the same formula as the "Variance" Member.This will be used to simply display a second cell with the same underlying value as Variance - but formatted using Format String hence enabling BOTH in the same report. (click to enlarge) In the outline you now select the member you want the Format String associated with and change the "associated Format String" in the Member Properties.As you can see in this example an IIF statement reading:MdxFormat(IIF(CellValue()< 0,"Negative","Positive" ) ) has been chosen for both new members.After applying the Format String changes and running a report via SmartView, the result is: (click to enlarge) reference: Essbase Database Admin Guide ,Chapter 12 "Working with Typed Measures "

    Read the article

  • Data Structure for Small Number of Agents in a Relatively Big 2D World

    - by Seçkin Savasçi
    I'm working on a project where we will implement a kind of world simulation where there is a square 2D world. Agents live on this world and make decisions like moving or replicating themselves based on their neighbor cells(world=grid) and some extra parameters(which are not based on the state of the world). I'm looking for a data structure to implement such a project. My concerns are : I will implement this 3 times: sequential, using OpenMP, using MPI. So if I can use the same structure that will be quite good. The first thing comes up is keeping a 2D array for the world and storing agent references in it. And simulate the world for each time slice by checking every cell in each iteration and further processing if an agents is found in the cell. The downside is what if I have 1000x1000 world and only 5 agents in it. It will be an overkill for both sequential and parallel versions to check each cell and look for possible agents in them. I can use quadtree and store agents in it, but then how can I get the information about neighbor cells then? Please let me know if I should elaborate more.

    Read the article

  • BI Publisher : Formatting Issues

    - by Manoj Madhusoodanan
    While creating BI Publisher reports the formatting issues are quite common.Here I am discussing some common issues related to BIP report development. 1) First issue is related to column formatting.When you want to display some data which has leading zeros or trailing zeros after '.' in EXCEL output you will not get the desired output.But in PDF it will come as what you are expecting.This is not with the issue of your data. This is due to the unique nature of EXCEL cell format.When you are trying to put a text data in a cell with out making any change to cell format it will treat as number and it will truncate all leading zeros and all trailing zeros after '.' . So what you have to do is to convert that data into a format which EXCEL can treat as text. Eg: If you want to display 0020100 convert this data into ="0020100". Same way for 23789.02300 to ="23789.02300".   Note: This is applicable to EXCEL output only.If you have multiple output type apply it only for EXCEL. 2) Second is related to report size issue in PDF output type.If the number of columns are more and if you want to show most of the columns in one row andif it is a PDF output you can choose the paper size as Legal (8.5 x 14''). You will get more spaces in the template to accommodate more columns. 3) If your XML data contains special characters like &,<,> etc ..  pass the data to DBMS_XMLGEN.CONVERT function.It will replace special characters with corresponding XML notations. Eg: (a>b) & (c!=d) to  (a&gt;b) &amp; (c!=d)

    Read the article

  • 3 column layout with css display table, with first row having multiple rows?

    - by Damainman
    I am working on a new website which: Has 3 columns - Each Column being a cell First column has 3 rows (Logo, Nav, icons) - Has a Div with display: table which wraps arround 3 divs with display:table-row. Other two columns only have 1 row. With the middle column being the content area. However since this is my first time using display:table, I am running into some things that aren't so clear to me. I was trying to avoid floating divs. If I need multiple rows with one cell in each row per column, do I embed each cell in a row or just create each row and not declare cells. I understand that browsers automatically create the missing elements but I want to make sure I do this properly to avoid any side effects that might occur due to the browser automatically creating the missing elements. Edit: I think my brain is just over worked, I guess I can accomplish this by just using 3 divs in the first column instead of using a nested table div with the rows. This just popped into my head.

    Read the article

  • How to embed woff fonts for iframe source pages?

    - by Mon
    I am trying to make and embed a slideshow (of text, photo, audio, video, etc) in my site (HTML5) by loading webpages consecutively inside an iframe embedded in my first page. Most or all of the frame source pages, i.e. pages loaded inside first iframe are mine, but located in many different places. All of these pages are in an Indic language. Although I can use UTF-8 charset and lang="" declaration and that's probably enough functionally, but I also want to embed my preferred Indic unicode font in WOFF format via CSS3 @font-face rule , so the size and look of the text is uniform and the way I want it - throughout the slideshow. Problem is, there are many many pages in the slideshow all located in various places with many more linked pages, and it is next to impossible, or at least would be extremely tedious, to embed my custom WOFF font in every single page (which will also require separate css and uploading of fonts in every single instance). Besides, this may make the slideshow very heavy, sluggish and cumbersome for the user, since it will have to load the custom Indic font again and again everytime a new page is loaded in the iframe. I am not sure about this though. Is that how it works? I ask this, because I noticed that when I embedded my custom WOFF font in the 'first' page, it did not have any effect on the pages loaded inside the iframe. If I embed the font in some of the pages in the iframe, the next pages still don't get my font. Is there a way to embed my custom WOFF font only once, preferably in the first page where the first iframe is, and pass its effect on to all the pages embedded / loaded through the iframe and make their text show up as per my initially embedded woff font - without embedding my font in every single of them? Please help!

    Read the article

  • Programatically create a table using c#

    - by Samir R. Bhogayta
    Table tbl = new Table();         tbl.ID = "table1";         this.Controls.Add(tbl);         for (int row = 0; row < 5; row++)         {             TableRow rw = new TableRow();             TableCell cell = new TableCell();             Label text = new Label();             text.Text = "text";             cell.Controls.Add(text);             rw.Cells.Add(cell);             tbl.Controls.Add(rw);         }

    Read the article

  • EXC_BAD_ACCESS error on a UITableView with ARC?

    - by Arnaud Drizard
    I am building a simple app with a custom bar tab which loads the content of the ViewController from a UITableView located in another ViewController. However, every time I try to scroll on the tableview, I get an exc_bad_access error. I enabled NSzombies and guard malloc to get more info on the issue. In the console I get: "message sent to deallocated instance 0x19182f20" and after profiling I get: # Address Category Event Type RefCt Timestamp Size Responsible Library Responsible Caller 56 0x19182f20 FirstTabBarViewController Zombie -1 00:16.613.309 0 UIKit -[UIScrollView(UIScrollViewInternal) _scrollViewWillBeginDragging] Here is a bit of the code of the ViewController in which the error occurs: .h file: #import <UIKit/UIKit.h> #import "DataController.h" @interface FirstTabBarViewController : UIViewController <UITableViewDelegate, UITableViewDataSource> { IBOutlet UITableView* tabBarTable; } @property (strong, nonatomic) IBOutlet UIView *mainView; @property (strong, nonatomic) IBOutlet UITableView *tabBarTable; @property (nonatomic, strong) DataController *messageDataController; @end .m file: #import "FirstTabBarViewController.h" #import "DataController.h" @interface FirstTabBarViewController () @end @implementation FirstTabBarViewController @synthesize tabBarTable=_tabBarTable; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]; if (self) { // Custom initialization } return self; } - (void)viewDidLoad { [super viewDidLoad]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Dispose of any resources that can be recreated. } - (void)awakeFromNib { [super awakeFromNib]; self.messageDataController=[[DataController alloc] init]; } - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } - (NSInteger) tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{ return [self.messageDataController countOfList]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"mainCell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil){ cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier]; }; NSString *expenseAtIndex = [self.messageDataController objectInListAtIndex:indexPath.row]; [[cell textLabel] setText:expenseAtIndex]; return cell; } - (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the specified item to be editable. return NO; } @end This FirstTabBarViewController is loaded in the MainViewController with the following custom segue: #import "customTabBarSegue.h" #import "MainViewController.h" @implementation customTabBarSegue -(void) perform { MainViewController *src= (MainViewController *) [self sourceViewController]; UIViewController *dst=(UIViewController *)[self destinationViewController]; for (UIView *view in src.placeholderView.subviews){ [view removeFromSuperview]; } src.currentViewController =dst; [src.placeholderView addSubview:dst.view]; } @end The Datacontroller class is just a simple NSMutableArray containing strings. I am using ARC so I don't understand where the memory management error comes from. Does anybody have a clue? Any help much appreciated ;) Thanks!!

    Read the article

  • Change a UIButton View's background upon press

    - by Michael
    This should be easy but its got me stumped. I've got a button on each row of a table cell. The button is to delete the file associated with that row. I have an image that indicates if the file is present on the iPhone or not present. When the user presses the button, the target action method (showDeleteSheet) then calls a UIActionSheet with a variable to give it the indexPath of the row pressed. Then the user presses delete on the action sheet and the action sheet's clickedButtonAtIndex method deletes the file. Now, I need to update the button's background image property to change the image in the appropriate table cell to the not downloaded image. This can be done in either the button's target action method or the action sheet's clickedButtonAtIndex method. Here is some code: In the table's cellForRowAtIndexPath method I create the button: UIButton *deleteButton = [[UIButton buttonWithType:UIButtonTypeCustom] retain]; [deleteButton addTarget:self action:@selector(showDeleteSheet:) forControlEvents:UIControlEventTouchDown]; deleteButton.frame = CGRectMake(246, 26, 30, 30); if (![AppData isDownloaded:[dets objectForKey:@"fileName"]]) { [deleteButton setBackgroundImage:notdownloadedImage forState:UIControlStateNormal]; } else { [deleteButton setBackgroundImage:notdownloadedImage forState:UIControlStateNormal]; } In the button's target method: -(void)showDeleteSheet:(id)sender { //get the cell row that the button is in NSIndexPath *indexPath = [table indexPathForCell:(UITableViewCell *)[[sender superview] superview]]; NSInteger currentSection = indexPath.section; NSInteger currentIndexRow = indexPath.row; NSLog(@"section = %i row = %i", currentSection, currentIndexRow); UIButton *deleteButton = [UIButton buttonWithType:UIButtonTypeCustom]; [table reloadData]; //if deleteButton is declared in .h then the other instances of deleteButton show 'local declaration hides instance variable' [deleteButton setBackgroundImage:[UIImage imageNamed:@"not-downloaded.png"] forState:UIControlStateNormal]; UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:@"Delete this file?" delegate:self cancelButtonTitle:@"Cancel" destructiveButtonTitle:@"Delete" otherButtonTitles:nil]; actionSheet.tag = currentIndexRow; actionSheet.actionSheetStyle = UIActionSheetStyleDefault; [actionSheet showInView:self.view]; [actionSheet release]; } Perhaps the issue is that the call to [deleteButton setBackgroundImage...]; doesn't know which cell's button should be updated. If so I don't know how to tell it which. Because I test if the file is downloaded when the button is made and the background image is set, when I scroll down so the cell in question is de-queued then scroll back up it show's the correct image. I've tried to force the table to reload but [table reloadData]; is doing nothing. I've tried reloadRowsAtIndexPaths and still no good. Any one care to educate me on how this is done?

    Read the article

  • Help with iphone dev - beyond bounds error

    - by dusk
    I'm just learning iphone development, so please forgive me for what is probably a beginner error. I've searched around and haven't found anything specific to my problem, so hopefully it is an easy fix. The book has examples of building a table from data hard coded via an array. Unfortunately it never really tells you how to get data from a URL, so I've had to look that up and that is where my problems show up. When I debug in xcode, it seems like the count is correct, so I don't understand why it is going out of bounds? This is the error message: 2010-05-03 12:50:42.705 Simple Table[3310:20b] *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[NSCFArray objectAtIndex:]: index (1) beyond bounds (0)' My URL returns the following string: first,second,third,fourth And here is the iphone code with the book's working example commented out #import "Simple_TableViewController.h" @implementation Simple_TableViewController @synthesize listData; - (void)viewDidLoad { /* //working code from book NSArray *array = [[NSArray alloc] initWithObjects:@"Sleepy", @"Sneezy", @"Bashful", @"Bashful", @"Happy", @"Doc", @"Grumpy", @"Thorin", @"Dorin", @"Norin", @"Ori", @"Balin", @"Dwalin", @"Fili", @"Kili", @"Oin", @"Gloin", @"Bifur", @"Bofur", @"Bombur", nil]; self.listData = array; [array release]; */ //code from interwebz that crashes NSString *urlstr = [[NSString alloc] initWithFormat:@"http://www.mysite.com/folder/iphone-test.php"]; NSURL *url = [[NSURL alloc] initWithString:urlstr]; NSString *ans = [NSString stringWithContentsOfURL:url]; NSArray *listItems = [ans componentsSeparatedByString:@","]; self.listData = listItems; [urlstr release]; [url release]; [ans release]; [listItems release]; [super viewDidLoad]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; self.listData = nil; [super viewDidUnload]; } - (void)dealloc { [listData release]; [super dealloc]; } #pragma mark - #pragma mark Table View Data Source Methods - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [self.listData count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *SimpleTableIdentifier = @"SimpleTableIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:SimpleTableIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:SimpleTableIdentifier] autorelease]; } NSUInteger row = [indexPath row]; cell.textLabel.text = [listData objectAtIndex:row]; return cell; } @end

    Read the article

  • Segmenting a double array of labels

    - by Ami
    The Problem: I have a large double array populated with various labels. Each element (cell) in the double array contains a set of labels and some elements in the double array may be empty. I need an algorithm to cluster elements in the double array into discrete segments. A segment is defined as a set of pixels that are adjacent within the double array and one label that all those pixels in the segment have in common. (Diagonal adjacency doesn't count and I'm not clustering empty cells). |-------|-------|------| | Jane | Joe | | | Jack | Jane | | |-------|-------|------| | Jane | Jane | | | | Joe | | |-------|-------|------| | | Jack | Jane | | | Joe | | |-------|-------|------| In the above arrangement of labels distributed over nine elements, the largest cluster is the “Jane” cluster occupying the four upper left cells. What I've Considered: I've considered iterating through every label of every cell in the double array and testing to see if the cell-label combination under inspection can be associated with a preexisting segment. If the element under inspection cannot be associated with a preexisting segment it becomes the first member of a new segment. If the label/cell combination can be associated with a preexisting segment it associates. Of course, to make this method reasonable I'd have to implement an elaborate hashing system. I'd have to keep track of all the cell-label combinations that stand adjacent to preexisting segments and are in the path of the incrementing indices that are iterating through the double array. This hash method would avoid having to iterate through every pixel in every preexisting segment to find an adjacency. Why I Don't Like it: As is, the above algorithm doesn't take into consideration the case where an element in the double array can be associated with two unique segments, one in the horizontal direction and one in the vertical direction. To handle these cases properly, I would need to implement a test for this specific case and then implement a method that will both associate the element under inspection with a segment and then concatenate the two adjacent identical segments. On the whole, this method and the intricate hashing system that it would require feels very inelegant. Additionally, I really only care about finding the large segments in the double array and I'm much more concerned with the speed of this algorithm than with the accuracy of the segmentation, so I'm looking for a better way. I assume there is some stochastic method for doing this that I haven't thought of. Any suggestions?

    Read the article

  • how to send put request with data as an xml element, from JavaScript ?

    - by Sarang
    Hi everyone, My data is an xml element & I want send PUT request with JavaScript. How do I do this ? For reference : Update Cell As per fredrik suggested, I did this : function submit(){ var xml = "<entry>" + "<id>https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1</id>" + "<link rel=\"edit\" type=\"application/atom+xml\"" + "href=\"https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/worksheetId/private/full/R2C1\"/>" + "<gs:cell row=\"2\" col=\"1\" inputValue=\"300\"/>" + "</entry>"; document.getElementById('submitForm').submit(xml); } </script> </head> <body> <form id="submitForm" method="put" action="https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1"> <input type="submit" value="submit" onclick="submit()"/> </form> However, it doesn't write back but positively it returns xml file like : <?xml version='1.0' encoding='UTF-8'?> <entry xmlns='http://www.w3.org/2005/Atom' xmlns:gs='http://schemas.google.com/spreadsheets/2006' xmlns:batch='http://schemas.google.com/gdata/batch'> <id>https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1</id> <updated>2011-01-11T07:35:09.767Z</updated> <category scheme='http://schemas.google.com/spreadsheets/2006' term='http://schemas.google.com/spreadsheets/2006#cell'/> <title type='text'>A2</title> <content type='text'></content> <link rel='self' type='application/atom+xml' href='https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1'/> <link rel='edit' type='application/atom+xml' href='https://spreadsheets.google.com/feeds/cells/0Aq69FHX3TV4ndDBDVFFETUFhamc5S25rdkNoRkd4WXc/od6/private/full/R2C1/1ekg'/> <gs:cell row='2' col='1' inputValue=''></gs:cell> </entry> Any further solution for the same ?

    Read the article

  • Finding contained bordered regions from Excel imports.

    - by dmaruca
    I am importing massive amounts of data from Excel that have various table layouts. I have good enough table detection routines and merge cell handling, but I am running into a problem when it comes to dealing with borders. Namely performance. The bordered regions in some of these files have meaning. Data Setup: I am importing directly from Office Open XML using VB6 and MSXML. The data is parsed from the XML into a dictionary of cell data. This wonks wonderfully and is just as fast as using docmd.transferspreadsheet in Access, but returns much better results. Each cell contains a pointer to a style element which contains a pointer to a border element that defines the visibility and weight of each border (this is how the data is structured inside OpenXML, also). Challenge: What I'm trying to do is find every region that is enclosed inside borders, and create a list of cells that are inside that region. What I have done: I initially created a BFS(breadth first search) fill routine to find these areas. This works wonderfully and fast for "normal" sized spreadsheets, but gets way too slow for imports into the thousands of rows. One problem is that a border in Excel could be stored in the cell you are checking or the opposing border in the adjacent cell. That's ok, I can consolidate that data on import to reduce the number of checks needed. One thing I thought about doing is to create a separate graph that outlines the cells using the borders as my edges and using a graph algorithm to find regions that way, but I'm having trouble figuring out how to implement the algorithm. I've used Dijkstra in the past and thought I could do similar with this. So I can span out using no endpoint to search the entire graph, and if I encounter a closed node I know that I just found an enclosed region, but how can I know if the route I've found is the optimal one? I guess I could flag that to run a separate check for the found closed node to the previous node ignoring that one edge. This could work, but wouldn't be much better performance wise on dense graphs. Can anyone else suggest a better method? Thanks for taking the time to read this.

    Read the article

  • How can I combine xsl:attribute and xsl:use-attribute-sets to conditionally use an attribute set?

    - by Peter
    We have an xml node "item" with an attribute "style", which is "Header1". This style can change however. We have an attribute set named Header1 which defines how this should look in a PDF, generated through xsl:fo. This works (the use-attribute-sets is mentioned inline, in the fo:table-cell node): <xsl:template match="item[@type='label']"> <fo:table-row> <fo:table-cell xsl:use-attribute-sets="Header1"> <fo:block> <fo:inline font-size="8pt" > <xsl:value-of select="." /> </fo:inline> </fo:block> </fo:table-cell> </fo:table-row> </xsl:template> But this doesn't (using xsl:attribute, because the attribute @style can also be Header2 for example). It doesn't generate an error, the PDF is created, but the attributes aren't applied. <xsl:template match="item[@type='label']"> <fo:table-row> <fo:table-cell> <xsl:attribute name="xsl:use-attribute-sets"> <xsl:value-of select="@style" /> </xsl:attribute> <fo:block> <fo:inline font-size="8pt" > <xsl:value-of select="." /> </fo:inline> </fo:block> </fo:table-cell> </fo:table-row> </xsl:template> Does anyone know why? And how we could achieve this, preferably without long xsl:if or xsl:when stuff?

    Read the article

  • manipulate variable made up of html before adding it to the dom (new in jQuery 1.4???)

    - by pedalpete
    I thought I had seen this in the first announcement of jQuery 1.4, but can't seem to find anything now. I have a calendar table which is built dynamically from a json ajax response. The table is built in a variable called putHtml. Currently, once the table is added to the DOM, I run a showEvents function which takes each event and adds it to the appropriate cell in the table. Unfortunately, when I have 100 events, that means I am updating the DOM 100 seperate times. Which is getting rather slow. I use the showEvents function to add events dynamically, so it would be really nice if I could just use the same function, and specify to look in the DOM for the cell to add the event to, or look in the variable (assuming I've got it right, and you can actually do this with jQuery). The code I use currenlty is this jQuery('div#calendars').append('putHtml.join('')); for(var e in thisCal.events){ showEvent(thisCal.events[e]); } What I had attempted to do instead was for(var e in thisCal.events){ showEvent(thisCal.events[e],putHtml); } jQuery('div#calendars').append('putHtml.join('')); the showEvents function looks like this function showEvents(event){ var eventDate=event.date; var eventTime=event.time; var eventGroup=event.group; var eventName=event.name; var eventType=event.type; var whereEvent=jQuery('div.a'+eventDate, 'table.'+eventGroup); var putEvent='<div class="event" id="a+'eventDate+'_'+eventTime+'">'+eventName+'</div>' jQuery(whereEvent, 'div#calendar').append(putEvent); if(eventType2){ jQuery(whereEvent, 'div#listings').append(putEvent); } } when attempting to manipulate the variable putHtml before adding to the dom, I was passing putHtml into the showEvent function, so instead of '(whereEvent, 'div#calendar'), I had (whereEvent, putHtml), but that didn't work. of course, the other method to accomplish this would be that when I make each cell, I iterate over the events json, and apply the appropriate html to the cell at the time, but that means repetitively running over the entire json in order to get the event to put in the cell. Is there another/better way to do something like this?

    Read the article

  • Portrait video to landscape

    - by dappa
    I am aware questions like this one may already be out there but for the sake of others like me I will go ahead and ask I have a app that is set to only allow portrait orientation but this setting affects my videos as I would like only the videos to be able to play in landscape also. Is there a method I can add unto my .m file to make this work? Here is my code; #import "BIDVideosViewController.h" @interface BIDVideosViewController () @end @implementation BIDVideosViewController @synthesize moviePlayer ; @synthesize tableList; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]; if (self) { // Custom initialization } return self; } - (void)viewDidLoad { [super viewDidLoad]; UITableView *table = [[UITableView alloc]initWithFrame:self.view.bounds]; [table setDelegate:self]; [table setDataSource:self]; [self.view addSubview:table]; tableList = [[NSMutableArray alloc] initWithObjects:@"Gangan",@"SwimGood",@"German Ice", nil]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Dispose of any resources that can be recreated. } -(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [tableList count]; } -(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *DisclosureButtonIdentifier = @"DisclosurebutotonIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:DisclosureButtonIdentifier]; if (cell == nil) { cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:DisclosureButtonIdentifier]; } NSInteger row = [indexPath row]; NSString *rowString = [tableList objectAtIndex:row]; cell.textLabel.text = rowString; return cell; } -(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { { NSBundle *str = [tableList objectAtIndex:indexPath.row]; if ([str isEqual:@"Gangan"]) { NSBundle *bundle = [NSBundle mainBundle]; NSString *thePath = [bundle pathForResource:@"Gangan" ofType:@"mp4"]; NSURL *theurl = [NSURL fileURLWithPath:thePath]; moviePlayer = [[MPMoviePlayerController alloc] initWithContentURL:theurl]; [moviePlayer setMovieSourceType:MPMovieSourceTypeFile]; [self.view addSubview:moviePlayer.view]; [moviePlayer setFullscreen:YES]; [moviePlayer play]; } else if ([str isEqual:@"SwimGood"]) { NSBundle *bundle = [NSBundle mainBundle]; NSString *thePath = [bundle pathForResource:@"SwimGood" ofType:@"mp4"]; NSURL *theurl = [NSURL fileURLWithPath:thePath]; moviePlayer = [[MPMoviePlayerController alloc] initWithContentURL:theurl]; [moviePlayer setMovieSourceType:MPMovieSourceTypeFile]; [self.view addSubview:moviePlayer.view]; [moviePlayer setFullscreen:YES]; [moviePlayer play]; } else if ([str isEqual:@"German Ice"]) { NSBundle *bundle = [NSBundle mainBundle]; NSString *thePath = [bundle pathForResource:@"German Ice" ofType:@"mp4"]; NSURL *theurl = [NSURL fileURLWithPath:thePath]; moviePlayer = [[MPMoviePlayerController alloc] initWithContentURL:theurl]; [moviePlayer setMovieSourceType:MPMovieSourceTypeFile]; [self.view addSubview:moviePlayer.view]; [moviePlayer setFullscreen:YES]; [moviePlayer play]; } } } @end

    Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >