Search Results

Search found 5859 results on 235 pages for 'driver'.

Page 22/235 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Installing NVIDIA driver causes black screen (750M)

  - by aftrumpet

  I have a dual boot set up on a Lenovo Ideapad Y500 with NVIDIA 750M and I am having problems installing the graphics cards. I have made sure to install both linux-headers-generic and linux-source, and yet have ended up with a black screen whether I install nvidia-current, nvidia-current-updates, nvidia-experimental-310, and nvidia-319. I even tried enabling proprietary drivers through settings and still ended up with a black screen on boot. Is my graphics card just not supported yet, or is there a way to fix this?

  Read the article

• Driver inversion

  - by Val

  I have a GUI game, which is driven by user every time it clicks the mouse. Every time user clicks a square on a board, the board state is updated (we re-compute the score, the player to make next move and legal movements it can make) and repainted. Both mouse click, state recomputation and painting are handled in the GUI thread. Now, suppose that I want to train AI to play without GUI. That is, game engine should consume next move by simply calling AI's makeMove function in one thread. This would allow to play millions of games per second automatically. GUI may just screenshot some arbitrary states time after time. How do you switch to this strategy?

  Read the article

• A simple demo for WDF Driver development

  Access physical memory, I/O port in user mode

  Read the article

• Strange Ubuntu Random Display [Video]

  - by d4v1dv00

  I had this random display issue ever since Ubuntu 11.04 and now running Ubuntu 11.10 and this problem still persist. It is very hard for me to explain, so I uploaded a video to elaborate itself. Before I convert from Windows 7, this issue never happened. The symptom is so random that I cannot reproduce or tell precisely when will this happen again. My wild guess is, should this be related to driver? Below are my detail system information: $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57788 Gigabit Ethernet PCIe (rev 01) is there any other information i need to post and how do i do that?

  Read the article

• Installing LBP 2900 ubuntu -> libs folders wrong?

  - by Peter Smit

  I am trying to get my Canon LBP2900 printer to work on Ubuntu 11.10 64 bit. What I have done is try to follow the steps on https://help.ubuntu.com/community/CanonCaptDrv190 So I downloaded the version 2.3 driver and tried to convert the rpm files to debian and installed them sudo alien cndrvcups-capt-2.30-1.x86_64.rpm cndrvcups-common-2.30-1.x86_64.rpm sudo dpkg -i cndrvcups-capt-2.30-1.x86_64.deb cndrvcups-common-2.30-1.x86_64.deb restarted cups and try to install the printer with lpadmin: sudo service cups restart sudo /usr/sbin/lpadmin -p LBP2900 -m /usr/share/cups/model/CNCUPSLBP2900CAPTK.ppd -v ccp://localhost:59787 -E What I noticed however that on the step with lpadmin it goes wrong with the error: lpadmin: Bad device-uri scheme "ccp" After trying to trace what has gone wrong, I think I nailed it to the fact that dpkg installed a file /usr/lib64/cups/backend/ccp instead of /usr/lib/cups/backend/ccp Checking the original rpm with archive manager shows indeed that /usr/lib and /usr/lib64 are used, with the backend/cpp file only installed in lib64. As I understand correctly, Ubuntu 11.10 uses /usr/lib32 and /usr/lib instead so the files are installed in the wrong place. Is there an automated method of converting the rpm/deb files with the wrong lib structure to one with the right lib structure for ubuntu 11.10? Or am I completely on the wrong track for getting my printer installed?

  Read the article

• Installing LBP 2900 printer -> libs folders wrong?

  - by Peter Smit

  I am trying to get my Canon LBP2900 printer to work on Ubuntu 11.10 64 bit. What I have done is try to follow the steps on https://help.ubuntu.com/community/CanonCaptDrv190 So I downloaded the version 2.3 driver and tried to convert the rpm files to debian and installed them sudo alien cndrvcups-capt-2.30-1.x86_64.rpm cndrvcups-common-2.30-1.x86_64.rpm sudo dpkg -i cndrvcups-capt-2.30-1.x86_64.deb cndrvcups-common-2.30-1.x86_64.deb restarted cups and try to install the printer with lpadmin: sudo service cups restart sudo /usr/sbin/lpadmin -p LBP2900 -m /usr/share/cups/model/CNCUPSLBP2900CAPTK.ppd -v ccp://localhost:59787 -E What I noticed however that on the step with lpadmin it goes wrong with the error: lpadmin: Bad device-uri scheme "ccp" After trying to trace what has gone wrong, I think I nailed it to the fact that dpkg installed a file /usr/lib64/cups/backend/ccp instead of /usr/lib/cups/backend/ccp Checking the original rpm with archive manager shows indeed that /usr/lib and /usr/lib64 are used, with the backend/cpp file only installed in lib64. As I understand correctly, Ubuntu 11.10 uses /usr/lib32 and /usr/lib instead so the files are installed in the wrong place. Is there an automated method of converting the rpm/deb files with the wrong lib structure to one with the right lib structure for ubuntu 11.10? Or am I completely on the wrong track for getting my printer installed?

  Read the article

• ubuntu nic card issue

  - by Blainer

  I am trying to install NIC r8168 and it shows everything installed ok. It is a brand new NIC and the lights wont come on when I plug in a ethernet. The NIC is that is not working is eth0. Why does it show the r8168 driver being used by 0? My NIC model number is ST1000SPEX if anyone is wondering. lsmod Module Size Used by r8168 215669 0 ifconfig eth0 Link encap:Ethernet HWaddr 00:0a:cd:1e:0a:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:19:d1:1d:f6:7a inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::219:d1ff:fe1d:f67a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:551467 errors:0 dropped:0 overruns:0 frame:0 TX packets:145219 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:409744342 (409.7 MB) TX bytes:12233173 (12.2 MB) Interrupt:21 Memory:dfde0000-dfe00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:280 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22608 (22.6 KB) TX bytes:22608 (22.6 KB) Ubuntu 11.10 x64 Kernel 3.0.0-12-generic

  Read the article

• can't get a good install:11.10 server

  - by jack

  I screwed up my partitioning aparently tring to get lvm and raid1 going. the machine is an intel dual core dt with 2 gig of ram and 2 sata drives, one 250g and the other 500g. This a build for my school in n.e. Thailand. we have 20+ clients now, a website, email. Our old server is dying fast and we are going to add another 12 stations next week. I really need some help here! 1. have onboard gigabit ethernet that aparently uses same driver as realtek 811c. I installed a pcie gigabit card also 811c. At several points the eth0 has accessed the internet fine, but the eth1 will not communicate. 2. I saw a "fix" for this online which from root: rmmod r8169. this imediately killed the working onboard card. 3.I tried to re-install 11.10 figuring that would re-install r8169. However I messed something up in my partitioning and can't get a clean boot now. 6. so I think after 12 re-installs or so and 2 days. I can get through it right if I can start over with clean drives, but I can't figure out how to empty them out what with soft raid and lvm partitions. seems like i've had it going well and then trying to fix that one little problem, i go backwards.Please help! please send email.-thanks

  Read the article

• How can I fix my xvinfo?

  - by YumYumYum

  How can i fix my X server/driver? $ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present Additional info: $ uname -a Linux desktop 2.6.32-33-generic #70-Ubuntu SMP Thu Jul 7 21:13:52 UTC 2011 x86_64 GNU/Linux $ lspci 00:00.0 Host bridge: Intel Corporation Device 0100 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 1503 (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c4a (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 10) 04:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) Follow up: It seems in 64-bit its a mess doing existing approach. Therefore, after upgrading to 12.04 64-bit this problems in same hardware is resolved (of-course, i have now other drivers problem)

  Read the article

• May I open my own device driver twice simultanoiusly from a user program under Linux?

  - by Viktor Gyuris

  Somewhere I read that opening the same file twice has an undefined semantics and should be avoided. In my situation I would like to open my own device multiple times associating multiple file descriptors to it. The file operations of my device are all safe. Is there some part of Linux between the sys call open() and the point it calls the registered file operation .open() that is unsafe?

  Read the article

• What do I have to do and how much does it cost to get a device driver for Windows Vista / 7 (32 and

  - by Jon Cage

  I've got some drivers which are basically LibUSB-Win32 with a new .inf file do describe product/vendor ids and strings which describe my hardware. This works fine for 32 bit windows, but 64 bit versions have problems; namely that Microsoft in their wisdom require all drivers to be digitally signed. So my questions are thus: Is there a version of the LibUSB-Win32 drivers which are already signed I could use? If there aren't already some signed ones I can canibalise, what exactly do I have to do to get my drivers signed. Do I need to get 64 and 32 bit versions signed separately and will this cost more? Is this a free alternative to getting them signed? Are there any other options I should consider besides requiring that my customers boot into test mode each time they start their machines (not an option I'd consider).

  Read the article

• How to write a generic USB Host Driver for Printers from various vendors?

  - by Ullas

  I want to develop a USB host on an embedded device that will talk to printers from various vendors. Drivers for the vendor specific printers would be available on PC which is ultimately communicating with printer but my device is facilitating this communication and needs to perform the basic handshaking/setup of the printer (i.e, it needs to know when the printer is connected, what are the socket IDs that needs to be opened for CTRL and DATA transmissions etc). All of these printers are supposed to comply with IEEE 1284.4 standards but I see that many of them vary quiet a bit. One approach I have is to take the USB traces of handshaking from each of these printers and write various sections of code respectively (I know, that sounds ridiculous!). Is there a generic way to do this? Is there any available forum where these standard informations are mentioned? For eg: EPSON uses 'EPSON-CTRL' and 'EPSON-DATA' for its control and data services which needs to be provided to get the socket ID for these services. I am pretty sure HPs, Canon's etc would have their own service names as well. As per the standards, this was supposed to be captured in IANA but I dont see anything there. Any help on this would be greatly appreciated. Thanks and regards, Ullas

  Read the article

• IBM HS23 Blade Server (7875) onboard NIC driver for linux

  - by Igor Spivak

  I work with IBM HS23 Blade Server (7875). It's onboard NIC adapter is: Emulex OCl11104-F-X Virtual Fabric Adapter 2-port 10GB and 2-port 1GB LOM . I'm tryed to the following Linux OS with the server: 2.6.32-22-generic-pae #36-Ubuntu SMP. and discovered my OS has not proper Network drive installed (for the NIC adapter described above). After investigation I made, I discovered that the driver I need is "be2net" placed in "net" directory of the linux under the folder "be2net". I managed to download this driver with the latest package for my kernel. Driver info ("modinfo be2net" result) is as follows: --------------------------------------------------------------------------------------- filename: /lib/modules/2.6.32-22-generic-pae/kernel/drivers/net/benet/be2net.ko license: GPL author: ServerEngines Corporation description: ServerEngines BladeEngine2 10Gbps NICDriver 2.101.205 version: 2.101.205 srcversion: 199ADD251CB874C3727CC47 alias: pci:v000019A2d00000710sv*sd*bc*sc*i* alias: pci:v000019A2d00000701sv*sd*bc*sc*i* alias: pci:v000019A2d00000700sv*sd*bc*sc*i* alias: pci:v000019A2d00000221sv*sd*bc*sc*i* alias: pci:v000019A2d00000211sv*sd*bc*sc*i* depends: vermagic: 2.6.32-22-generic-pae SMP mod_unload modversions 586TSC parm: rx_frag_size:Size of a fragment that holds rcvd data. (uint) --------------------------------------------------------------------------------------- After starting linux, I get the following error: be2net 0000:16:00.x: Emulex OneConnect 10Gbps NIC (be3) initilization failed. I checked the same server with another Linux version (Red-Had 5.5.1.0) and the NICs worked properly, so seems there is no problem in HW. Also, on IBM or Emulex offical sites I managed to find drivers only for Red-Had and SUSE versions.

  Read the article

• Black screen while booting, after installing installing AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver on HP pavilion dm4

  - by Megharaj

  HP Pavilion dm4 with configuration as shown below cpu intel Core i5 2.26 GHz RAM 4.0 GB Graphics processor 512MB ATI Mobility Radeon(TM) HD 5450 switchable graphics [HDMI, VGA]. I installed ubuntu 10.04 ( without AMD graphics driver) it was working fine, but when I installed AMD graphics drivers AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, than the problem started from then When I boot I was get black screen. Than I thought to upgrade from ubuntu 10.04 to 12.04 using the bootable pen drive but was getting black screen than read on some forums that was because of the switchable graphics, than upgraded ubuntu 12.04 by setting to "nomodeset". It was working, again thought to install graphics driver AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, again after installing this, when I boot I am getting blank scree . Can anyone help me to inatall ubuntu 12.04 along with AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver. Any help is highly appreciated.

  Read the article

• Nvidia Linux Driver Huge Resolution

  - by darxsys

  I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

  Read the article

• Adobe premiere CS5 problem with the display driver

  - by user30179

  This error is really hindering our project. I get an error, it started showing-up June 16th 2010. There are no windows updates at the on the same date as the error, other than (Windows Defender) Seems to happen when working with Image overlays. ERROR: "The NVIDIA OpenGL driver detected a problem with the display driver and is unable to continue. The application must close." We opened the side of the case in the possibility there is an over heating problem. Nvidia Driver ver 8.16.11.9175 (nVidia Quadro FX 1700) I am running: Windows 7 x64 Adobe premiere CS5 Production nVidia Quadro FX 1700 (MRGA14L) 4 Gig ram RAID 10 2 750GB drives Duo core 3.0 6MB L2 Cache This is at least three other people that have come across this error: NVidia Forum EVGA Forum NVidia Forum UPDATE: Having the case open did not help. I also installed New Nvidia drivers now I get a different error: *ERROR:*Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. I ran Windows Update and installed all four updates so now I am waiting to see if the error occurs again. Anything beyond this I am out of options.

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

• Dell Driver Support for Latitude E6320 Windows 7 Enterprise

  - by IamPolaris

  I recently did a reinstall of Windows 7 Enterprise on a Dell Latitude E6320, which is a 64 bit system. After the install process, and doing typical Windows Update stuff, I looked at my Device Manager and found that I had devices which were missing drivers. My missing drivers: After going to the Dell Support site and looking at the files, and doing some sleuthing I found the following support document: http://downloads.dell.com/utility/Latitude%20E-Family%20%20Mobile%20Precision%20Re-Image%20How-To%20Guide%20-%20A03%20Rev%203%200.pdf This document hints in appendix C that the Broadcom USH is the Control Point Security and the Unknown device is Micro freefall sensor. The network controller is my wireless, as I cannot connect wirelessly, and the final missing driver I am not sure. Attempting to install the control point security exe on the support page will not work. After downloading, I am given the message that I am attempting to install a 32 bit driver on a 64 bit machine EVEN THOUGH I selected the win7 64 bit option from the support page. Beyond that, some of the drivers (Which are confusing to read and hard to understand what they do) and the system utilities which are supposedly supposed to make this process simpler will either a) not run because they are 32 bit exe's or b) the support page cannot find the file attempted to download. Is there anything I can do to get (at the very least) my wireless running, but idealistically all of my drivers. A solution which assumes Dell is completely incompetent would be ideal. :P Some forums have said that I should download the chipset driver, others say to get the system utility file (DSS_UTIL_WIN_R282536.EXE). I have had no luck as of yet...

  Read the article

• ixgbe driver: Limit the max number of cores

  - by Shellex Wai

  I have a Linux workstation with 48 cores and runs ixgbe driver for fiber interface. And I have to test a project name Netmap on it. NetMap is a high performance network framework for high speed interfaces, which has been ported to Linux recently. For some reasons, I must try it on the machine. So I compile it and follow the instructions to run the test problems, but it doesn't work. I check dmesg and it says: [10399.085736] 794.159015 netmap_set_ringid [486] ringid o4o1 set to all 48 HW RINGS [10399.085742] 794.282011 netmap_obj_malloc [220] netmap_if request size 816 too large I asked the author of netmap for help. He told me that I have too many cores in the machine and it should work if I tell ixgbe use less cores (2 to 4 is ok). I am not familiar to driver development and I don't know how to limit the ring numbers by passing arguments to ixgbe driver. So I check the spec from intel's website but found nothing about it. So I come here for more helps. Thank you.

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Using udev to create a character device based on a driver being loaded

  - by SteveCB

  I'm in the process of setting up RAID monitoring for a number of Dell servers that use the PERC 6i integrated card. We're using Nagios at present and the check_megasasctl plugin seems to fit the bill. However, the plugin relies upon the existence of: /dev/megaraid_sas_ioctl_node This device node doesn't exist by default, you have to create it by hand using something like: mknod /dev/megaraid_sas_ioctl_node c 253 0 Now, to make the existence of this device node persistent across reboots, I thought I could write a udev rule, but as usual, I'm missing something. I thought I could create a file such as /etc/udev/rules.d/10-local/rules that contained: DRIVER=="megasas" NAME="megaraid_sas_ioctl_node" MODE="0600" But this doesn't work - no device node after a reboot. Dmesg output indicates the megasas driver is loaded and functional: megasas: 00.00.04.01-RH1 Thu July 10 09:41:51 PST 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0 megasas: FW now in Ready state Further, I don't see any means to instruct udev on which type of device node to create: character or block. I suspect I'm failing to understand exactly how udev is meant to work. I realise I could just cheat and run MegaCLI in /etc/rc.local, redirecting output to /dev/null; it creates the megaraid_sas_ioctl_node device node as part of its execution. I just thought using udev rules would be a) cleaner and b) a useful learning exercise. Perhaps I should just dump the above mknod command in /etc/rc.local... So how do I get udev to create the /dev/megaraid_sas_ioctl_node device node based on the presence of the megasas driver? Cheers Steve

  Read the article

• What video graphic card would permit ubuntu's standard driver to work well?

  - by Rick

  I installed ubuntu 12.04. All seemed well until I installed the nvidia driver. Then crashola! This situation is untenable. It seems I cannot trust nvidia, and it seems that I cannot rely on ubuntu gurus to test 3rd party drivers. So, apparently some video card manufacturers do not care enough about the linux market to test their drivers, or are there too many 3rd party video cards so that ubuntu folks do not test any 3rd party video drivers? Hence the question: What video graphic card would permit me to use ubuntu's standard driver so that I do not have to rely on nvidia's or any other 3rd-party driver? Perhaps I could then install THAT card and have things work? The ubuntu standard driver actually worked prior to installing the nvidia driver, but not well, and that was because the display flickered, and flickering gives me a headache.

  Read the article

• On clients use generic driver for printer shared by CUPS

  - by Daniel

  I know this worked really easy with a recent CUPS version some years ago. Unfortunately I fail to do the following with latest CUPS nowadays. How to share a printer without using printer specific drivers on the clients with CUPS? The printer is a Samsung ML-2010. The important fact is that it needs a quite specific library for printing called splix. That is installed on the server and prints well. What makes trouble is using that printer over the network. I found out how to use Avahi under Linux to make use of DNSSD to advertise and discover printers. But as far as I understand the new CUPS offers the internal driver interface on the network. This has 2 major issues: anybody can fiddle with the driver and I don't trust any uncommon printer library to be "network secure" anyone who wants to use my printer including guests needs to install the specific drivers first I remember the old days when I could enable "Share this printer" on the CUPS server and all clients would magically detect the printer and just send their job data to the server and have it do the driver stuff. After everything a read I guess this is related to the changes Apple introduced with CUPS including dropping of the integrated network discovery protocol. If it helps: Server: Ubuntu LTS 12.04 Server with CUPS 1.5.3 Client: Arch Linux with current CUPS 1.6.1 On another box with Ubuntu the printer was setup automatically at least but the mechanism used the Splix library for that.

  Read the article

• I need a driver for my Cardbus USB 2.0 card

  - by Carl

  The picture and details of the card are here: http://www.ht-link.com/en/ProductView.asp?ID=106 The Windows drivers for this don't work right. I tried them on my previous laptop, and then installed the ones off their included CD. (Note that the systems requirements includes a CD-ROM drive...) I have a new laptop, and lost the CD. The website that lists the drivers is broken - the download links don't work. It is here: http://www.ht-link.com/en/DownView.asp?ID=10 I need the very first link - The Win XP drivers for the HT-112NEC. The company does not reply to my e-mails. I've tried searching Google for other sources for the driver (I didn't bother with those sites that want me to install driver detection software or create a log-in for their site). [Here's the problem I am getting using the drivers Windows XP SP3 installs: When I plug in my USB 2.0 hard-disk adapter, a USB Mass Storage Device entry is added in the Device Manager, but there is no entry under Disk Drives, and a drive letter is not assigned, so I can't access the driver. Like I said, this card didn't work without their special drivers on my other laptop, either.]

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >